Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

(ll) Requirements

Education

• Bachelor's degree in Mechanical, Electrical, or a related field.

Experience

• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards.

Skills & knowledge

• Profound knowledge of M&E and piping systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Job Description: Software Engineer

As a Software Engineer at D-SIMLAB Technologies, you will gain exposure to both technical and soft skills development while working on innovative software solutions for world-leading semiconductor manufacturers. This role extends beyond software development, involving close collaboration with clients and providing professional consultation services to support their operational needs.

Key Responsibilities:

• Software Product Deployment and Delivery:
  Collaborate with a team of Software Engineers and Data Scientists to ensure smooth deployment and delivery of D-SIMLAB’s software products at semiconductor manufacturing sites. Work with global clients to address their technical needs and deliver high-quality solutions.
• Product Enhancement:
  Contribute to the continuous improvement of D-SIMLAB’s software, focusing on areas such as data visualization and algorithm optimization to improve product quality and user experience. Actively participate in product development cycles, from conceptualization to implementation.
• Key Software Component Development:
  Take ownership of the development and maintenance of critical software components, ensuring scalability, performance, and reliability in diverse manufacturing environments.
• Client Consultation:
  Provide technical expertise and consultation to customers, helping them implement and optimize D-SIMLAB’s software solutions in their manufacturing processes.
  Assist in troubleshooting and problem-solving to enhance client satisfaction.
• Collaboration and Innovation:
  Work in a multicultural and multidisciplinary team, contributing to innovative ideas and technical solutions. Stay updated on the latest technology trends and actively seek ways to improve the efficiency and performance of the software.

Candidate Requirements:

• Education:
  Bachelor’s or Master’s degree in Computer Science, Software Engineering, Industrial Engineering, or a related field.
  Diploma holders with relevant experience are encouraged to apply.
• Technical Skills:
  Strong skills in C#, .NET, SQL.
  Familiarity with software development life cycles, agile methodologies, and version control systems.
  Experience with algorithms, data structures, and software architecture design.
  Experience with visualization frameworks and tools is an advantage.
• Soft Skills:
  Strong interpersonal and communication skills, with the ability to work effectively with clients and teams from different technical and cultural backgrounds.
• Adaptability and Willingness to Travel:
  Willingness to travel internationally and work on challenging projects at semiconductor manufacturing sites. Ability to adapt quickly to new environments and work under pressure to meet project deadlines.
• Career Growth:
  Interest in personal and professional growth by enhancing both technical and soft skills.Fresh graduates are welcome to apply.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

Candidate with experience as stated below will be an added advantage:-

a. Working with LTA and related Agencies

b. Underground pipe laying for Power & Telco

c. Road Works (Milling & Patching)

d. ERSS - Earth Retaining Support Sysytem

e. Site management and coordinations

f. Proper communications and detailed information flow

Infrastructure & Platform Services Team
You will help to build and sustain strong technology foundations forming the bedrock of our digital solutions.

What impact can you make in this role?
We are looking for Lead Cloud Engineer, who will enable our Cloud Native transformation efforts in alignment with the next iteration of our customer’s technology transformation journey, all with the goal of driving developer velocity and therefore business agility and value. This role will see synergistic collaboration with senior leadership and teams/squads of product-minded architects, engineers, and application developers, who are passionate about “building cloud applications and not just applications in the cloud”.

What will you do as an Cloud Engineer, Technology Group?

Enable Cloud Native transformation strategy and roadmap

• Enable the next iteration of cloud strategy by planning and executing against the vision for an agile organization that leverages cloud native to take full advantage of cloud computing
• Communicate the case for and benefits of increased cloud native adoption to senior stakeholders, business units and business solution teams
• Enable roadmaps and pathways for the rationalization and modernization of applications to just-right cloud services, platform, and architecture within our hybrid cloud (public and private) ecosystem
• Measure and track progress of cloud strategy through the development of effective Key Performance Indicators (KPIs) that set the conditions for successful cloud native adoption, culture, behaviour, and differentiating business outcomes

Enable Cloud Centre of Practice and Excellence

• Champion and exemplify cloud native practices, including cloud native philosophy, architecture, principles, and culture
• Lead product management, including research and proof-of-concept, for emerging cloud native services and platforms, for example, enterprise containerization, landing zones, orchestration, and automation
• Define cloud reference architecture, standards, and processes within the enterprise, for example, provide opinionated landing zones that comprise a set of policies or rules to enforce a security baseline and prevent non-compliant activities
• Perform cloud governance role in disciplines like identity & access management, tenant/account management, security & compliance, and billing
• Provide common tooling, solutions, and patterns for cloud native adoption and developer enablement, productivity, and self-service
• Assist application and developer teams to onboard applications to hybrid cloud (public and/or private) services and platforms
• Provide education and learning opportunities to enable teams to understand existing and emerging cloud computing technologies, as part of overall cloud capabilities building

Deliver Cloud Engineering and Operations

• Implement opinionated set of technologies, on top of cloud service provider(s), to consolidate institutional knowledge, tooling, patterns and practices; and deployable artifacts to production
• Provision cloud services to developer teams based on pre-stipulated service level agreements
• Manage the maintenance of virtual appliances, for example, AMI, and base container images
• Manage cloud operations disciplines like patch management, network configuration, certificate management, logging agents, and intrusion detection
• Steward cloud spend and budget, including the monitoring of cumulative usage, identifying of areas for optimization, managing reserved instances (RI) and negotiating on committed spend agreements
• Manage support vendor partnerships through regular vendor stewardship meetings and service level and escalation reporting

Provide technical leadership

• Provide technical coaching and mentoring to enterprise architects, application and infrastructure teams on cloud native architecture, philosophy, and practices

What qualifications or skills should you possess in this role?

• At least 8 years of relevant experience in delivering hybrid cloud strategies, operating models, and technology service management practices
• Bachelor’s Degree or Master’s in Computer Science, Information Technology or equivalent
• Some return-on-investment and business case development experience
• Strong communication abilities to influence key stakeholders ranging from C-level executives, MDs, CISO, application architects and subject matter experts
• Proven track record of delivering cloud applications on Amazon AWS and Microsoft Azure using cloud-native design and patterns
• Proven experience in designing microservices, event driven architecture using open source, .NET, NodeJS, Python, Java, message queues, streaming, databases, and cloud data services
• Extensive experience in architecting applications and automation technologies to meet the expected standards of availability, agility, capacity, resiliency, and security
• Hands-on experience with cloud technologies including, Docker, Kubernetes (particularly RedHat OpenShift 4.x), Infrastructure as Code, Service Mesh, Immutable Infrastructure, and declarative APIs
• Hands-on experience automating full lifecycle management of application hosting platforms in data center and public cloud using DevOps practices and CI/CD methodologies
• Strong understanding of Infrastructure and Platform Automation technology products such as Amazon CloudFormation, VMware vRealize Suite, HashiCorp Suite, Puppet, Ansible, and Chef
• Strong understanding of AGILE, LEAN or SaFE methodology
• Strong understanding and knowledge of industry technology standards, and security & compliance frameworks (e.g. NIST, CIS, CSM) and experience working with audit and regulatory bodies
• One or more AWS/Azure Certifications at Professional and/or Specialty level

The Quality Engineer applies engineering principles and techniques to meet the quality targets and organisational objectives in a manufacturing environment. He/She also assists in analysing manufacturing and quality issues make recommendations for out of control processes.

In addition, the Quality Engineer participates in quality improvement projects in accordance with organisational objectives.

The Quality Engineer is required to have strong communication skills, good teamwork and an analytical mind to perform his/her role well to achieve the desired organisational outcomes.

~ Assist in implementation of improvement projects.
~ Attend to internal or external audits related issues.
~ Collect data for analysis.
~ Enforce practices of good safety culture and good manufacturing practices.
~ Ensure adherence to processes and procedures.
~ Ensure all quality plans are properly documented and maintained.
~ Ensure no expired tools running in the production line.
~ Facilitate the implementation of quality system in the organisation.
~ Identify opportunity for continuous improvement projects.
~ Implement calibration cost reduction activities.
~ Interpret information provided by the network/dashboard for quality performance monitoring.
~ Maintain production yield targets.
~ Monitoring quality control and assurance processes.
~ Perform evaluation/experiments.
~ Supervise manufacturing work for workplace safety and health compliance.

1. Plan, design and construction management of Mechanical services for all types of building projects.
2. Mechanical services include Air-conditioning & mechanical ventilation system, fire protection system, sanitary, plumbing, gas and swimming pool filtration systems.
3. Provide support in project management and contract administration for building engineering contracts.

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Supervise concreting, pavement, drainage construction works (applicable for C&S);
• Carry out checks on compaction and curing of concrete (applicable for C&S);
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S);
• Carry out checks on quality & erection of precast components (applicable for C&S);
• Check on structural steel works (applicable for C&S);
• Check and assess temporary works and ERSS by the contractors to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations;
• Carry out coordination of all services, help resolve contractors’ queries and provide feedback on site issues, discrepancies and irregularities to QP(S), project consultants and/or CAG ;
• Review contractor’s submissions (shop drawings, method statements, risk assessment, test plans, soil sample test results, test cube results, DSM core results etc), and report any non-compliance with the Contract and authority’s requirements to CAG, the project consultants and/or QP(S);
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies;
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings;
• Attend QAQC meetings, monitor and check on quality on all works and materials on site; take measures to rectify any non-compliance and report of any materials that are not conforming to the Specifications;
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works;
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site;
• To review all drawings (including shop drawings, construction drawings) and method statements and risk assessments to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Contractor / QPs, including checking of as-built drawings and Operation & Maintenance Manual submitted by the contractors and ensuring that the required construction tests associated with the construction works are carried out where necessary;
• Coordinate and compile the As-Built information for record purposes timely.
• Monitor the quality and progress of defects rectification works when necessary.
• Ensure that daily records of all civil and structural engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, site diary, labour force, day works,provisional items or provisional quantities etc, are updated in a timely manner and properly kept;
• Keep accurate records of variations as instructed or approved and to maintain a set of updated drawings on site;
• Together with the safety team, provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site, provide safety oversight and ensure main contractors and their sub contractors adhere to the approved safe work
• procedures for the works and all relevant CAG and regulatory safety requirements; ensure mitigation controls in updated risk registers (Programme/Aerodrome/DfS) are duly implemented on site;
• Liaise with all relevant authorities;
• Adhere to the shift duty roster assigned;
• Undertake any other duties includign administrative tasks related to the project as and when instructed by the SRE, Consultants or CAG

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;
• Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;
• Lead C&S and/or geotechnical site staff to monitor, supervise and inspect works as directed by CAG, QP(S), SRE, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;
• Possess strong supervision and leadership skills;
• Must be willing to work shifts.

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Salary - ($5,200 - $6,000)

Mon - Fri, 8am - 5:15pm

Job Description:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations

Job Requirements:

• Diploma/ Degree in Mechanical Engineering
• Minimum 2-3 years related work experience
• 2D & 3D CAD operations; strong in CATIA
• Proficient in Microsoft ( Excel / words / powerpoint )
• Good technical design and engineering background would be highly advantageous
• Solid work test will be conducted during interview

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description:

• Involvement in Production testing scope.

• Operates and maintains simple test equipment appropriately to measure and perform RF PCBA & module tuning and testing

• Perform duties with minimal supervision

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

• Set up and run HASS to qualify the modules under testing conditions.

• Conduct a Functional Acceptance Test to complete the module test process.

• Maintaining the operations of the ATE stations

• To generate test reports

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

Job Requirement:

• Education background : ITE or Diploma in Electronics / Communication Engineering or related studies

• On the job training will be provided.

• Prior experience working in electronics (modules) production / manufacturing environment

• Competent handling of miniature with tweezers

• Ability to handle and solder components using a microscope

• Ability to produce consistent quality workmanship on repetitive manual processes

• Work Location: Ang Mo Kio

Knowledge, Skills, Competencies

• Able to understand mechanical and electrical wiring diagram with some basic understanding of cable termination.

• Experience with network design and networking exposure will be added advantage

• Good knowledge with Operating platform such as Microsoft Windows and Linux

• Proficiency in operating measuring equipment or software such as network analyser, serial protocol analyser and oscilloscope

Skills and experiences required

· Proficient in AUTOCAD & REVIT

· Knowledge of BIM (Building Information Management) will be an added advantage

· Minimum 3 – 5 years of relevant experience working in M&E construction or similar capacity

· Able to work under tight deadlines and schedules

· Meticulous and strong in construction detailing

· MS Office at least to intermediate level

Duties & Responsibilities

· Prepare contract documentation drawings for preliminary, construction and as-built status

· To work with Project Managers, Project Engineers and to co-ordinate with consultants as well as main and sub contractors on interpretation of drawings

· Prepare shop drawings for Mechanical system

· Ensure drawings are compliant with the regulatory specifications

· Ensures qualitative and timely delivery of all drawings and maintain soft copy of archive drawings

· Attend weekly meetings

Qualifications & Other requirements

· Diploma in Mechanical/Electrical / Higher NITEC holders or its equivalent

· Willing to work extended hours and/or on weekends & public holidays when urgently required

· A team player with initiative, drive and a positive attitude

· Singaporean / Singapore PR preferred

· Preferably able to commence immediately

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Scope :

- Assume responsibility for technical assignments involving basic or applied research or the design and development of Electrical hardware products. Includes design, fabrication, modification and evaluation of electromechanical devices, components or systems.

- Devise initial concept of assigned device, component or system and participate in the overall detailed Electrical perspective of product design.

- Creates original hardware, circuits, components, software, processes, and models to prove the feasibility of the design approach being investigated. Inclusive of Electronics and PCBA

- Participate in design review by providing inputs relating to DFM and DFA, etc.

- Prepare and release Engineering drawings/schematics while communicating to local vendors to expedite delivery of design parts and assemblies.

- ECO release of engineering documentation.

- Design of AC/DC power distribution systems including selection of circuit breakers, power supplies, contactors and cabling harnesses. Knowledge of PCBA Design, component selection and trouble shooting.

- Develop, test and document designs

- Develops estimates for products and projects. Power consumption, weight, size and schedule.

- Coordinates with manufacturing during pilot run and first production runs to ensure efficient transition from engineering into production.

- Interface effectively with customer to understand technical requirements and propose quality solutions.

- Possesses good electrical troubleshooting skills, and is able to troubleshoot at customer sites.

- Interfaces effectively with other organization such as Purchasing, Marketing, Service, and Quality Assurance as needed to carry out responsibilities

- Assists engineering management in developing schedules and specifications for new and legacy products.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Directs engineering and technical support personnel as required.

- Maintains a high level of technical competence and state-of-the-art awareness.

- Performs other related duties as assigned.

Requirements:

- Degree / Masters in Engineering or requivalent

- 3 – 5 years of relevant experience

- Good working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.

- Experience working on dynamic electromechanical system design

- Proficient user of orcad, autocad, pcad, Solidworks or similar 3D CAD Software

- Design knowledge on NFPA, Semi Safety Requirements, and Machine safety.

- Good communication and interpersonal skills.

- Good command of written and verbal English

Your Role

• Coordinate design drawings with consultants to comply with requirements of the authorities
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress
• Prepare technical submissions for materials, construction methods and C&S shop drawings
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities
• Supervise a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans

The Requirements

• Possess a Degree in Civil/ Structural Engineering with relevant design working experience with contractors
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore
• At least 3 year(s) of working experience in the related field is required for this position.
• Be conversant in British & Singapore Design Standards
• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills

Skills and experiences required

· Proficient in AUTOCAD & REVIT

· Knowledge of BIM (Building Information Management) will be an added advantage

· Minimum 3 – 5 years of relevant experience working in M&E construction or similar capacity

· Able to work under tight deadlines and schedules

· Meticulous and strong in construction detailing

· MS Office at least to intermediate level

Duties & Responsibilities

· Prepare contract documentation drawings for preliminary, construction and as-built status

· To work with Project Managers, Project Engineers and to co-ordinate with consultants as well as main and sub contractors on interpretation of drawings

· Prepare shop drawings for Mechanical system

· Ensure drawings are compliant with the regulatory specifications

· Ensures qualitative and timely delivery of all drawings and maintain soft copy of archive drawings

· Attend weekly meetings

Qualifications & Other requirements

· Diploma in Mechanical/Electrical / Higher NITEC holders or its equivalent

· Willing to work extended hours and/or on weekends & public holidays when urgently required

· A team player with initiative, drive and a positive attitude

· Singaporean / Singapore PR preferred

· Preferably able to commence immediately

• A Global leader in Intralogistics, Supply chain automation and solutions
• Exposure to industrial trends and technology

About Our Client

The client is a global leader in providing intelligent automation solutions for supply chain, logistics, and material handling industries. With a strong commitment to innovation and excellence, we help our customers optimize their operations and drive efficiency through cutting-edge technologies and services.

Job Description

Key Responsibilities:

• Review project specifications, drawings, and related documents to understand the scope and requirements of the design phase.
• Develop detailed and accurate cost estimates for the design phase, including materials, labor, equipment, software, and other resources.
• Work closely with design, engineering, procurement, and project management teams to ensure alignment between cost estimates and project goals.
• Engage with clients to understand their expectations and provide transparent communication on cost-related matters.
• Identify potential risks and uncertainties that could impact design phase costs.
• Prepare and maintain clear and detailed documentation of cost estimates, ensuring accuracy and accessibility for stakeholders.
• Effectively communicate cost estimates to internal teams, project managers, and clients.

The Successful Applicant

• Bachelor's degree in engineering, logistics, or a related field.
• Proven experience in a similar role, preferably in logistics automation or supply chain solutions.
• Strong analytical and technical skills in Microsoft Excel for precise cost estimation.
• Experience using design software tools (AutoCad, Solidworks, Inventor)
• Excellent communication and collaboration skills.
• Proficiency in relevant software tools for cost estimation and project management.

What's on Offer

To be part of a globally renowned leader in automation solutions, work within a diverse and talented team, access career growth opportunities, receive competitive salary and benefits, and engage in an innovative and dynamic work environment.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-112024-6585629

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

Job Description& Responsibilities:

· Responsible for advanced optical module/ethernet product hardware system and circuit design, provide design reviews, drive system/product design trade-offs, make data driven design choices to define product architecture

· Responsible for new product design verification and characterization, conduct high- speed link simulation, failure analysis and debugging in NPI stages to optimize design and ensure performance.

· Work with cross-functional teams to develop new products that are time to market and superior in performance, quality and cost.

· Contribute to optical transceiver module/ethernet product architecture and engineering specifications based on product and customer requirements.

· Perform system performance validation and DVT test plans, debug and analyze test results.

· Provide design documentation and technical reports.

Qualification:

· Bachelor/Master degree or above in electrical or electronics engineering or related fields.

· More than 7 years of working experience in optical module/networking switch or relevant products design and development.

· Sound knowledge of optical transceiver standards, architectures and applications, well understanding of design & trade-offs with respect to size, power consumption, thermal management and manufacturing complexity.

· Solid understanding of high speed signal integrity and power integrity analysis and optimization on PCB/system channel link analysis, well versed in modeling and simulation using tools such as HFSS, ADS, SIWAVE, LTSPICE etc.

· Familiar with high speed digital and analog ICs (CDRs, DSPs, SerDes, TIAs, DC-DC Converters, LDOs).

· Knowledge in IEEE 802.3 Ethernet and PCIe spec will be a plus.

· Extensive experience with lab equipment such as Sampling Scope, RealTime Scope, Protocol Analyzer, BERT, PNA/VNA.

· A solid team player with strong leadership and inter-personal skills, able to take proactive, collaborative and creative approaches to innovate and influence for optimal results.

· Strong written and verbal communication skills.

· Willing to travel as require.

Job Summary:

As an Electrical and Electronic Engineer, you will be responsible for designing, developing, testing, and maintaining electrical systems and electronic equipment. This includes working on components such as circuits, microprocessors, sensors, power generation and distribution systems, and control systems, applying your technical expertise to meet the needs of clients, manufacturers, or specific industries.

Key Responsibilities:

• Designing electrical circuits and systems.
• Creating schematics and layouts.
• Selecting appropriate components and materials.
• Conducting electrical tests and simulations.
• Ensuring designs comply with regulatory standards.
• Collaborating with other engineers to integrate electrical and electronics systems into products.
• Troubleshooting and resolving design issues.
• Preparing technical documentation and reports.
• Managing and maintaining design files and databases.
• Staying current with advancements in electrical and electronics engineering and technology.
• Performing any other tasks assigned.

Key Skills & Qualifications:

Education: Bachelor's degree in Electrical Engineering, Electronic Engineering, Mechatronics, or a related field. A Master's degree or higher is often preferred for senior roles.

Technical Skills:

• Proficiency with electrical engineering software (e.g., AutoCAD, MATLAB, LabVIEW, PSpice, etc.).
• Solid understanding of circuit design, PCB layout, and embedded systems.
• Experience with power electronics, automation, and control systems.
• Familiarity with microprocessors, sensors, IoT devices, and communication protocols (e.g., Bluetooth, Wi-Fi, SPI, I2C).
• Understanding of signal processing, analog and digital electronics.
• Problem-Solving & Analytical Skills:Strong troubleshooting and analytical skills to identify and resolve complex electrical and electronic issues.
• Soft Skills:Excellent communication skills for documentation and reporting, as well as client interaction.
• Ability to work collaboratively in team environments, especially in cross-disciplinary teams.
• Strong time management and organizational skills

Position : Graphic Designer

• Working day : Mon - Fri ( 9am -6pm)
• Address : Henderson Rd (Bukit Merah)
• Salary : $2600-$3000

Key Responsibilities:

• Conceptualize and Design: Create compelling visual content for websites, social media, advertisements, brochures, product packaging, and other media.
• Brand Identity: Ensure consistency with the brand’s visual identity by following style guides, fonts, and color schemes.
• Collaborate: Work with marketing teams, copywriters, photographers, and project managers to meet the client's or company’s design goals.
• Design Tools: Use software such as Adobe Creative Suite (Photoshop, Illustrator, InDesign) to create and edit graphics.
• Mockups & Prototypes: Design mockups and prototypes to present concepts to clients or teams for feedback before finalizing designs.
• Project Management: Manage multiple projects and deadlines, ensuring timely delivery of high-quality designs.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

At Cheil, we are passionate about ideas that move.

We believe that the right idea will move seamlessly across channels: from online to offline, above the line to below the line, in-store to out-of-home. It will move brands, move products and most importantly, move people. The right idea will move everything forward.

Established in 1973 with headquarters in Seoul, South Korea, Cheil Worldwide is one of the world’s leading integrated marketing communications networks, with more than 7,200 employees globally in more than 54 offices in 46 countries.

For more information, visit us at: www.cheil.com.

We are inviting candidates for the position of:

Content Publishing / Graphic Design Intern (Full-time internship)

Job description

Working with the Samsung Electronics SEA & Oceania business, you will have the privilege of working within a big data environment where strategic decisions are made, guiding best in class upholding brand compliance.

• Content Audit & Analysis: Work closely with the Content Team to conduct content audits on Samsung.com to ensure content is brand compliant and aligns with our strategic objectives.

• Progress Tracking & Reporting: Analyse, track, and report progress on weekly and monthly reports for multi-market operations, providing insights and recommendations for optimization.

• Training Document Management: Prepare and maintain training documents, Standard Operating Procedures (SOPs), and any other necessary documents to support team operations and knowledge transfer.

• Assist in Design Projects: Execute simple design tasks such as key visual adaptations for regional campaigns, ensuring alignment with brand guidelines and creative direction.

• Asset Management: Organize and maintain digital assets, including images, graphics, and other design elements, to facilitate efficient workflow and collaboration within the team.

Desired Skills and Experience

• Good skill in Excel and PPT

• Good skill in Adobe Illustrator and Photoshop

• Pursuing or recently completed a degree in Graphic Design, Visual Communication, or a related field.

• Analytical and quantitative, with strong attention to detail

• Self-starter with excellent communication and collaboration skills, with the ability to work effectively in a team environment.

• Ability to thrive in a fast-paced, ambiguous, interruptive environment

• Ability to work independently as well as work collaboratively toward a common goal

Responsibilities

- create high-quality advertising designs, including posters, brochures, website layouts, social media content, etc., based on client requirements.

- participate in brainstorming sessions to develop creative advertising concepts with the team.

- ensure designs align with brand identity and effectively communicate core messages.

- monitor project progress and maintain effective communication with clients and internal teams.

- stay updated on industry trends and continuously enhance design skills.

Requirements

- Bachelor's degree or higher in Art, Design or a related field.

- A least 15 years of exprience in advertising design, with a strong portfolio preferred.

- Proficient in design tools such as photoshop, illustrator, and InDesign, familiarity with basic animation or video production is a plus.

- Strong aesthetic judgement and creative thinking with the ability to quickly understand client needs.

- Excellent team collaboration skills and the ability to work under pressure.

- Exprience in branding, digital marketing, or cross-media projects is a plus.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Responsibilities:

• Provide end-user support and operational assistance.
• Troubleshoot and resolve system issues.
• Collaborate with team members for system improvements.
• To provide necessary post-project application software support to the client
• Develop new applications.

Requirements:

• Diploma or Degree in Engineering, Computer Science, IT, or related field.
• 1+ year of relevant experience in end-user support and operations.
• Proficient in Oracle PL/SQL, Oracle Pro-C, Unix ANSI C, Visual Basic .NET, and Unix scripting.

Apply, please kindly email your updated resume to [email protected].

Only shortlisted applicants will be notified.
APBA TG Human Resource Pte Ltd (14C7275) || Akshya R (R24122440)