Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

Physical Design Engineer (Digital IC)

Job Description：
1. Works with the senior physical design team to complete the chip floorplan , clock architecture, and powerplan .
2. Involved in one or more physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.
3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:
1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science
2. 0 - 5 years of work experience in the digital backend design field. (Fresh graduates can be considered).
3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.
4. Willing to work in a new start up entity in Singapore

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

Job Description

• High degree of expertise in corporate interior space planning.
• Develop and execute high quality corporate office interior design concepts.
• Create and formulate design presentation strategies.
• Enjoy client-facing presentations with excellent client liaison skills.
• Oversee interior design process for entire project consistent with project timeline, budget and program.
• Ability to coordinate material and colour selection, interior construction administration and installation.
• To be able to muilti-task and enjoy working in a multi-cultural environment.
• Coordinate with all internal and external parties related to the project.

Requirement

• Minimum 10 years' experience in corporate interior design and interior achitecture.
• BS or BA in Interior Design, Interior Architecture or equivalent in experience.
• Possess excellent design flair, highly creative with a good eye for design details.
• Work with speed and meet project deadlines.
• Passionate about corporate office interior design and public spaces.
• Strong design portfolio in corporate office interior design.
• Excellent time management, organizational skills and communication skills.
• Highly efficient in AutoCad and Microsoft Office tools.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

· Design and coordinate assigned Civil and Structural projects

· Perform structural analysis and design in building or on any structures as required by the project

· Liaise with clients & consultants to meet C&S requirements.

· Coordinate to ensure civil and structural requirements meet project tender, submission and construction schedule

Requirements:

· Good degree in Civil and Structural Engineering from a recognized University

· Minimum 1-2 year working experience in Civil & Structural consultancy firm

· Conversant with structural programs such as STAAD, TEKLA, ETABS, RAPT would be advantages

· Ability to work independently

· Candidate without the relevant working experience but with good academic results may be considered

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Ensure the development of new products and the assurance of current products that are robust, reliable, top quality, with delightful customer experience in product usage.
• Define, develop, and contribute to innovation projects, including:
  • New product development
  • Introduce or evolve product test methods
  • Conduct field studies and experiments
  • Develop and prove the hypothesis with correlation studies/experiments
  • Process digitalization and automation
  • Data analytics and visualization
• Provide training to MPa or test partners to facilitate PQC (Pre-Qual check), SNV (Safety net validation), and System testing, as well as technical support if needed.
• Requirements of analysis; test planning, execution (functional & integration test for both apps and software), and reporting.
• A validation system was developed to assess the design holistically through the customers' lens.
• Conduct gamma testing on products nearing release, following defined test plans and scenarios.
• Collaborate with cross-functional teams, including developers, product managers, and quality assurance teams, to ensure issues are understood and resolved effectively.
• Other duties that may be determined by Management.

• Degree in Mechanical, Mechatronics, Electrical/Electronics, Computing, or any field of Engineering with programming/scripting skills.
• Minimum of 3 years of experience in reliability testing or a related role.
• Strong knowledge of electrical systems, components, and testing methodologies.
• Experience with electrical test equipment and instrumentation.
• Proficiency in data analysis and statistical tools.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.

WHAT YOU DO AT AMD CHANGES EVERYTHING

We care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences – the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world’s most important challenges. We strive for execution excellence while being direct, humble, collaborative, and inclusive of diverse perspectives.

AMD together we advance_

THE ROLE:

To validate and characterize the most cut edge SerDes design including PAM4 224G transceiver on the most advance technology node. Using the latest measuring equipment the semiconductor industry has to offer to benchmark AMD’s SerDes against the challenging industry standard.

THE PERSON:

We are looking for a meticulous and motivated engineer with strong engineer to join the validation teams.

KEY RESPONSIBILITIES:

• Post Silicon Validation of high speed SerDes
• Understand the industry requirements and specification for high speed IO
• Develop validation methodology to validate new industry standard and requirements.
• Characterize the latest SerDes design
• SerDes debug with designers on Silicon
• Tuned the latest design to performance at the most optimum setting
• Generate specification base on measured results
• Work with remote teams to co-ordinate distributed task.
• Support FAE on customer’s issues relating to high Speed Ios

PREFERRED EXPERIENCE:

• Experience in high speed IO SerDes post-silicon validation.
• In-depth knowledge of the latest industry standards such as PCIe, Display Port, JESD, SDI, OIF-CEI-11G/25G/56G/112G-VSR/SR/MR/LR, IEEE 802.3 KR/CR/CAUI/GAUI etc.
• Strong programming/scripting skills coding languages such as Python, C/C++, TCL for firmware development, test methodology development and test automation
• Extensive experience with common lab equipment, including BERT, analyzers, oscilloscopes, PNA/VNA etc
• Knowledge of SerDes general architectures and link level system analysis
• Good understanding in transmission line theory and electromagnetic theory
• Experience in system level serial link analysis and simulation, system performance optimization and standard/architecture level study using tools such as Matlab, ADS etc.

ACADEMIC CREDENTIALS:

• Bachelors/Masters degree in Electrical/Electronics Engineering

LOCATION:

Singapore

Job Description:

• Able to assist in Costing
• Proficient in Autocad sanitary plumbing
• Candidate is proficient in Building Information Modeling (BIM)
• Knowledge in AUTOCAD (2D & 3D) & BIM drawing
• Plan, manage and execute design work, typically from concept through to completion and manage design changes during construction stages
• Plan all drawing request to meet the submission deadline
• On time delivery drawings, correct and accurate drawings
• Work closely with assigned PM on Autocad and Drawing Status reporting
• To attend site walk as and when required by the Engineers and Managers
• Ensure compliance with the relevant design codes and specifications

Requirements:

• Minimum 2-3 years relevant experience
• Positive working attitude, self-motivated and responsible
• Able to start work immediately
• Fresh graduates welcome to apply

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Company Overview

Ambiq's mission is to develop the lowest-power semiconductor solutions to enable intelligent devices everywhere by developing the lowest-power semiconductor solutions to drive a more energy-efficient, sustainable, and data-driven world. Ambiq has helped leading manufacturers worldwide develop products that last weeks on a single charge (rather than days) while delivering a maximum feature set in compact industrial designs. Ambiq's goal is to take Artificial Intelligence (AI) where it has never gone before in mobile and portable devices, using Ambiq's advanced ultra-low power system on chip (SoC) solutions. Ambiq has shipped more than 230 million units as of October 2023. For more information, visit www.ambiq.com.

Our innovative and fast-moving teams of research, development, production, marketing, sales, and operations are spread across several continents, including the US (Austin and San Jose), Taiwan (Hsinchu), China (Shenzhen and Shanghai), Japan (Tokyo), and Singapore. We value continued technology innovation, fanatical attention to customer needs, collaborative decision-making, and enthusiasm for energy efficiency. We embrace candidates who also share these same values. The successful candidate must be self-motivated, creative, and comfortable learning and driving exciting new technologies. We encourage and nurture an environment for growth and opportunities to work on complex, engaging, and challenging projects that will create a lasting impact. Join us on our quest for 100 billion devices. The endpoint intelligence revolution starts here.

Responsibilities

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

Specific responsibilities include:

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.
• Develop test plans at block, sub-system, and chip level.
• Execute SoC-based verification at full-chip.
• Write C-based lib packages and tests.
• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.
• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.
• Automating the test environment for randomized testing and scoreboarding.
• Utilize advanced debugging techniques to identify and resolve design and verification issues.
• Perform root-cause analysis and work with design teams to fix identified issues
• Define and track functional and code coverage metrics to ensure thorough verification.
• Ensure that verification quality meets or exceeds industry standards and project requirements.
• Edge-based AI inference is preferred.

Requirements

What you need to have to be successful

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification
• Should have delivered multiple chips functioning to Specification.
• Identify and manage verification deliverables, milestones, and schedules.
• Proactively identify potential verification risks and develop mitigation strategies.
• Collaborate with design, architecture, and software teams to understand and verify design intent.
• Communicate verification progress, issues, and results to stakeholders and management.
• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges
• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.
• C-based verification in an SoC environment is required
• Experience with ARM processor-based designs and low-power design techniques is a plus.
• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile
• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5
• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Responsibilities

• Develop and design mechanical systems and components for machine automation projects.
• Utilize CAD software to create 3D models, assemblies, and detailed drawings.
• Work with the team to ensure designs meet project requirements and standards.
• Assist on various projects consisting of the design, fabrication, and modification of components.
• Coordinate with fabrication house and component suppliers.
• Assist in assembling, installing, and completing the design work in which you were involved.
• Involve in design reviews, troubleshooting, and continuous improvement efforts.
• Perform all given tasks within given time.
• Be committed and responsible.
• Any other duties as assigned.

Requirements / Qualifications

• Diploma / Degree in Mechanical/Mechatronics Engineering or relevant technical discipline.
• Fresh graduates are welcome to apply (Must be willing to learn).
• Candidates with automation background only.
• Proficient in designing and drafting using 3D CAD software.
• Proficient with Microsoft Office.
• Good communication skills.
• Able to start immediately.

My client is a well established C&S consultant firm in town.

Multi-disciplinary consulting civil and structural engineering services.

Responsibilities:

• Carry out comprehensive analysis and design works for complex and large scale projects.
• Perform analysis and design for the project
• Supervise the drafting of drawings related to design.
• Ensure all engineering works comply with relevant statutory standards, regulations and Codes of Practice.
• Assist QP/Project Lead in managing project stakeholders, clients, design team, site team and other relevant parties.
• Liaise and coordinate with contractors, project team and design consultants.
• Work independently in analyses, design, submissions, construction support and coordination works.

Requirements:

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.
• With working experiences in Singapore on structural engineering projects.
• Minimum structural design experience 5 years.
• Well verse with structural engineering design to local Codes, Regulations and requirements, and Eurocode.
• Well verse in structural design software, e.g. ETABS, STAAD Pro, SAFE, SAP 2000, MIDAS, etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Knowledge in temporary works, ERSS will be an advantage.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1109557 Rose

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Who We Are

The EDL Group is a leader in surfacing materials, serving architects and interior designers with cutting-edge solutions for stunning and functional spaces. Headquartered in Singapore, with a regional presence and over 200 employees worldwide, we pride ourselves on delivering innovative, design-led products that inspire creativity.

Job Description

We are looking for a Design Manager to spearhead our Graphic Design team and bring bold, innovative ideas to life.

Key Responsibilities

1. Strategic Planning:

• Collaborate with senior management to define the creative direction and align it with business goals.
• Develop and implement strategies to enhance the design team’s productivity and creativity.
• Ensure all creative outputs align with brand guidelines, company objectives, and marketing goals.

2. Internal collaboration:

• Work closely with internal stakeholders across departments to understand project goals and creative requirements.
• Act as the key point of contact for internal design needs, managing expectations and delivering high-quality results.

3. Concept Development & Execution:

• Drive brainstorming sessions to develop innovative ideas that meet internal objectives.
• Oversee the design process from concept to final delivery

4. Team Leadership:

• Lead, mentor, and inspire the graphic design team
• Provide constructive feedback and guidance to team members to elevate the quality of deliverables and foster professional growth.

Qualifications

• Proficiency in Adobe Creative Suite (Illustrator, Photoshop, After Effects, Premiere Pro, etc.) and other design tools.
• Experience in Print, Motion Graphics, and Digital Design (websites, social media, animations, videos).
• A strong portfolio showcasing a variety of projects, including print, motion, and digital designs
• Strong communication skills
• Capable of working independently and managing multiple projects and deadlines.
• A proactive mindset, passion for design, and eagerness to learn new skills.

Preferred Skills

• Expertise in typography, 3D design, or advanced motion graphics.
• Understanding of UX/UI design principles for digital projects.

What We Offer

• A dynamic and creative work environment.
• Opportunities for growth and development.
• The chance to lead and shape impactful projects

Job Responsibilities

• To respond, follow up and complete design requests on time.
• To understand project requirements and produce designs for proposals and tenders, collaborating with Sales and Operations Teams to clinch projects.
• To take on special customized projects whenever required
• To ensure information are properly handed over to Sales and Operations Teams, in accordance to client’s requirements and ensuring all installation compliance
• To visit Clients with Sales/Operations team for presentations, networking etc.
• To assist Design Manager to perform any other related projects and duties as required.

Job Requirements

• Degree in Architecture or equivalent
• Preferably 2 years of working experience in design, landscape, architecture, or any related field
• Software Skill(s): Revit, Autocad, Lumion, Sketchup, Photoshop, 3Ds Max.
• Creative and has technical knowledge in basic construction design
• Able to create design concept and narrative for Design Proposals

Job Purpose:

The Design Manager will play a pivotal role in enhancing the unique style and personality of The Standard, Singapore. Working closely with the property and Corporate Design Team, you will support the property’s design initiatives, focusing on furniture, small construction projects, signage, maintenance of existing designs, and assisting in design development. Your creativity will be key to ensuring that every visual element aligns with The Standard’s vibrant and distinctive brand.

Duties and Responsibilities:

• Collaborate with Teams: Work closely with the Management Team to ensure that all spaces meet the specified standards and that public areas are always "in show" status.
• Maintain Design Integrity: Partner with Housekeeping, Engineering, and Food & Beverage teams to ensure that interior design standards are consistently met. This includes ensuring all rooms, displays, layouts, structures, signage, and event setups are visually up to par.
• Lead Property Tours: Conduct weekly property tours with department heads to report on active, pending, and completed projects impacting guest experience, ensuring they are aligned with brand integrity.
• Project Reporting: Assist in clear and accurate reporting of design projects across all departments, ensuring ongoing communication and understanding.
• Design Execution: Execute all design-related projects as specified by the corporate design team, including material sourcing, vendor selection, budget management, and creating maintenance manuals.
• Vendor Coordination: Schedule, follow up, and oversee outside vendor projects in a professional manner.
• Procurement and Inventory Management: Manage the processing and tracking of Purchase Orders, coordinate furniture placement, landscaping maintenance, and oversee tools and materials needed across the property. Maintain and organize inventory of all fixtures, furniture, and equipment on and off property.
• Support Marketing and Events: Collaborate with the marketing team on the physical and creative setups for activations and events, ensuring design consistency.
• Installations and Communication: Coordinate on-site installations and communicate work schedules with relevant departments.
• Material Sourcing: Source new and replacement materials for projects, whether locally, nationally, or internationally.

Skills and Qualifications:

• Bachelor’s degree in Interior Design, Architecture, or a related field.
• 2-4 years of interior design experience, preferably within hospitality or lifestyle brands.
• Strong project management skills with the ability to manage multiple tasks and meet deadlines.
• Proficiency in Adobe Creative Suite, Microsoft Office, CAD, SketchUp, and similar design software.
• Ability to read and interpret construction documents, floor plans, and understand spatial relationships.
• Knowledge of basic wood and metal finishes and general contracting terms.
• Excellent communication skills in English, both verbal and written.
• Highly organized with extreme attention to detail.
• Ability to work independently and as part of a team with a positive attitude.
• Adaptability and the ability to thrive in a fast-paced environment, meeting project needs and expectations.

Job Responsibilities

· Inform Design Team, Cost / Commercial team of all client-led change proposals and instructions.

· To manage local consultants in the execution of design development.

· To assist in coordination between Design Team, Consultants, Operator stakeholders.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, manage the consultants as required in review and comment of shop drawings in terms of constructability, sequencing and ensure quality of he design aesthetic is maintained throughout.

· Follow through on design development of Concept, Schematic, Development and Construction Documentation for all projects where applicable.

· To attend and review Mock Ups.

· Conduct site and factory visits to ensure implementation and compliance with approved design intent and direction.

· Interfacing with internal and external Operations Management to ensure timely incorporation of operational requirements within the project design.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To assist consultants and design team to complete and resolve any unforeseen interface problems throughout the various Design Phases.

JOB REQUIREMENTS

• Minimum 8 year’s working experience in Architecture Design Management of Hospitality would be preferred
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Architecture, Interior Design or equivalent.
• Possess good communications and people skills
• Good organization, coordination and leadership skills
• Required skill(s): design development, project management, construction.