Job Responsibilities:

· Design and implementation of mixed signal CMOS IP. Development cycle including circuit design, simulation, modeling, verification and bench characterization.

· Management products utilizing leading edge sub-micron CMOS technologies, e.g., 5/6nm

· Developing state of the art high speed mixed signal IP products that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, DC-DC converters, and high bit-rate (Gbps) Serdes TX/RX.

Requirements:

· Bachelor or above degree in Microelectronic or Electronic and Information Engineering

· 5 years or above experience in the area of analog design

· Good knowledge in analog IC design in high speed Serdes, e.g., PLL, CDR, CTLE/DFE, TX driver etc.

• Solid understanding and experience in key analog layout considerations such as device matching, parasitic, noise coupling, floor planning, sensitive signal routing, current density and reliability considerations
• Familiar with SPICE simulation tool (e.g., Cadence spectre, Synopsys Custom Compiler, Calibre)

· Strong Communication skills, high level of independence, self-motivation and good team player

As an Electrical and Electronic Engineer, you will be responsible for designing, developing, testing, and maintaining electrical systems and electronic equipment. This includes working on components such as circuits, microprocessors, sensors, power generation and distribution systems, and control systems, applying your technical expertise to meet the needs of clients, manufacturers, or specific industries.

Key Responsibilities:

• Designing electrical circuits and systems.
• Creating schematics and layouts.
• Selecting appropriate components and materials.
• Conducting electrical tests and simulations.
• Ensuring designs comply with regulatory standards.
• Collaborating with other engineers to integrate electrical and electronics systems into products.
• Troubleshooting and resolving design issues.
• Preparing technical documentation and reports.
• Managing and maintaining design files and databases.
• Staying current with advancements in electrical and electronics engineering and technology.
• Performing any other tasks assigned.

Key Skills & Qualifications:

Education: Bachelor's degree in Electrical Engineering, Electronic Engineering, Mechatronics, or a related field. A Master's degree or higher is often preferred for senior roles.

Technical Skills:

• Proficiency with electrical engineering software (e.g., AutoCAD, MATLAB, LabVIEW, PSpice, etc.).
• Solid understanding of circuit design, PCB layout, and embedded systems.
• Experience with power electronics, automation, and control systems.
• Familiarity with microprocessors, sensors, IoT devices, and communication protocols (e.g., Bluetooth, Wi-Fi, SPI, I2C).
• Understanding of signal processing, analog and digital electronics.
• Problem-Solving & Analytical Skills:Strong troubleshooting and analytical skills to identify and resolve complex electrical and electronic issues.
• Soft Skills:Excellent communication skills for documentation and reporting, as well as client interaction.
• Ability to work collaboratively in team environments, especially in cross-disciplinary teams.
• Strong time management and organizational skills

Civil Engineer (Steel/Facade/Architectural Finishes Design)

Responsibilities:

• Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.
• Coordinate with client and consultant for steel structure detailed design, shop drawing, authority submission and installation schedule.
• Support the team to design for steel structure support system.
• Involve in project planning, implementation and close monitoring of projects
• Project coordination including submission to local authorities and liaison during the construction stage.
• Any other task as designated by the management

Requirements:

• Relevant Degree recognized by Professional Engineers Board (PEB)
• Min 4 years of working experience in construction & structural steel industry
• Able to understand and prepare cutting plan, structure design and outfitting.
• Ability to work independently in a fast-paced environment.
• Effective communication and good interpersonal skills.

Interested applicants please submit your resume to [email protected]

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• Bachelor/master’s degree in Electrical/Electronic Engineering / Computer Science or equivalent
• With minimum 4 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills
• Candidate with more years of experience will be considered for a more Senior role.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Be part of a worldwide R&D team in designing leading edge optocoupler products from Broadcom.

• Design analog and mixed signal ICs for industrial and automotive applications.
• Work with marketing and project team in defining specifications and system architecture to meet customer requirements.
• Perform circuit analysis, simulation and design verification with Cadence tools.
• Test and troubleshoot circuit problems to fix bugs.
• Customer support on IC failure analysis.
• Support reliability and manufacturing tests for product qualification.

Requirements

• Knowledge and experience in analog and mixed signal IC design.
• Familiarity with sigma delta converter, switched capacitor filter, bandgap reference, PLL/DLL, optical transceiver and power management design will be added
• advantages.
• Bachelors and 7+ years of related experience or Masters degree and 5+ years of related experience or PhD and 3+ years of related experience
• Master's or Bachelor's degree in electrical engineering

Mission statement:

Lead the engineering execution of medium-size projects and ensure that all related activities are performed in accordance with Hitachi Energy policy, contractual agreements, quality standards, health, safety & environment requirements. Responsible for day-to-day designing and engineering activities aligned with schedule commitments. He / She is to possess technical knowledge and skills relating to the design of various transmission substation/Industry components, systems and equipment. To provide technical guidance to his/her project team and lead project engineering discussion.

Your responsibilities:

• You will design system while adhering to design and engineering principles of transmission substation/Industry, incorporate equipment, system, and safety features in design plans, comply with local and national safety standard and ethics that come with the design engineer role.
• You will maintain records and documents of all the work and design in accordance with unit and customer requirement.
• You will work in within the proposed schedule and budget for the project and liaise with project stakeholders with status update to them regarding the status of the work.
• You will coordinate mechanical and electrical tests on design, if required, conduct tests on equipment against fundamental design.
• You will manage department's compliance with organization’s risk management framework, review design drawings for practicability, completion timeframe and research capabilities.
• You will assist in development engineering resource planning strategy, coordinate with factory and supplier to ensure the design meet with the requirement, prepare design related calculation and issue bill of material·
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• You hold Electrical Engineering degree or equivalent.
• Preferably with 3 years’ experiences in Electrical/Transmission Industry.
• Experience and proficient knowledge and skills in BIM - Autodesk REVIT (3D model)
• Experience in switchgear planning, design and bidding related tasks.
• Good knowledge of substations equipment, protection relays and network automation.
• Knowledge of Electrical/Transmission Utilities Industry is preferred.
• Proficiency in English language.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Requirements:

• Knowledge in AutoCAD
• MS Office
• Diploma / Bachelor / College Degree equivalent certifications in IT / Engineering with at least 2 years of experience in the field or in a related area

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ship electrical system design
• Electrical Load Schedule
• Electrical Single Line diagrams
• Short Circuit calculation
• Circuit breaker calculation
• Electrical equipment selection
• Electrical cable schedule, Cable tray layout, MCT design, cable route preparation, termination diagram
• Preparation of electrical material take off
• Possess good knowledge in automation integrations such as vessel ISCS, VRCS, AMS, etc.
• Prepare design drawings and documentation
• Project management, Project scheduling, client interaction, site visit (client office, ship, etc)

REQUIRED QUALIFICATIONS AND SKILLS

• Bachelor Degree in Electrical Engineering
• At least 3 years of working experience in the marine sector

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Description & Requirements

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, STRAP, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

A world in crisis and needs a different kind of thinking. At Whiby Wood Mills, we fuse design, engineering, and a systems philosophy to push the boundaries of what is possible. We fully embrace the changing landscape of digital tools, R&D and dynamic workflows to unlock new high value sustainable results.

You will join as an Intern, and your key contributions will be:

• Helping to deliver transdisciplinary, holistic design for high-profile international projects.
• Supporting the team in delivering design solutions.
• Contributing to the preparation of design solutions, presentations, and reports.
• Assisting with 3D modelling for analytical or geometrical models (Etabs and Rhino).
• Assisting the team with design tasks on various projects.
• Contributing to benchmarking aspects of building design.

What we look for:

• Positive attitude and eagerness to learn.
• Commitment to the team and the work.
• Interest in computational design and programming.
• Undergrad in Engineering, Architecture, Architecture and Sustainable Design, Computer Science, etc

What we offer:

• A dynamic, fast-growing environment.
• Exposure to international projects.
• Collaborations with worldwide leading architects.
• An excellent environment for professional growth.

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

- To troubleshoot and problem solving of manufacturing process

- To liaise with operation team in technical challenge and manufacture process.

- To provide alternative solution to production on any process problem arises

- Familiar with metalworks manufacturing processes, etc. fabrication & welding, machining

- Familiar and able to interpret mechanical drawings & understand requirements

- Responsible for the maintenance of the system inclusive of the machine

- Ad-hoc duties as assigned

Requirment

- Minimum ITE, Degree/Diploma in Mechanical /Enginerring

- Well versed in using AutoCAD knowledge

- Experience in electrical engineering will be a plus

- Good communication skills and the ability to work collaboratively in a team environment.

- Ability to manage multiple tasks and deadlines effectively.

• Main Contractor
• 5 day week
• Central working location
• Good benefits & staff welfare

Responsibilities:

• Responsible for the preparations and modifications of Architectural design from concept designs through schematic design, design development and construction documentation
• Responsible for developing solutions to the technical & design complications following Singapore’s established standards
• Required to participate in Client liaison, authority consultation, coordination with consultants and subcontractors, and attending design and construction meetings
• Collaborating with clients, architects, engineers, government agencies and stakeholders to create functional and aesthetic design results as per conceptual design.
• Work out schedule for shop drawing preparation/approval and material approval/procurement based on master programme and monitor the status.
• Liaise with BIM team on drawings production to identify clashes with other trades
• Ensure compliance to construction drawings, project specifications, client's needs and authorities' code and standards.
• Verify site installation according to approved shop drawings and finalize as built drawings.
• Review project specifications, technical clarification and construction drawings, identify technical issues and seek technical clarification.

Requirements:

• Diploma or Degree in Building or Architecture
• Minimum 5 years of relevant experience in building projects

• 5 days
• 9am-6pm
• Kallang, Near Bendemeer, Lavender and Kallang MRT
• Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description:

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Requirements:

• Knowledge in AutoCAD
• MS Office
• Diploma / Bachelor / College Degree equivalent certifications in IT / Engineering with at least 2 years of experience in the field or in a related area

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

Company Description

Our client is a rapidly expanding Singapore based Startup Studio focused on automation & roboticsfor F&B, is rapidly expanding. They’re a Startup Studio that is redefining the accessibility and distribution of food and drink with robotics and automation.

They have assembled a brilliant team of engineers and food scientists, that blends youth and experience, with the aim of building fully automated solutions for the F&B industry. They are not abig corporate, where people can fade into obscurity, undervalued and unheard. Instead we pride ourselves on giving a platform for everyone to contribute, and see their ideas come to life!

Job Description

We are looking for a mechanical design engineer with at least 3 years of work experience who will be responsible for creating and developing mechanical systems and components for a food-making robot.
This includes conducting research, designing and drafting plans, testing and evaluating prototypes, and implementing and refining designs based on feedback and performance data. Note that this is a fully on-site role, so remote or hybrid work will not be permitted.

• Conducting research and analysis to understand the functional and performance requirements of the food-making robot we’re developing and coming up with appropriate design solutions.

• Developing detailed mechanical designs and technical drawings, using CAD

software and other tools, to create functional and efficient mechanical

systems and components
• Collaborating with other mechanical, electrical, electronics, and software

engineers to integrate mechanical designs into larger systems and ensure compatibility and performance.

• Testing and evaluating prototypes, using various tools and techniques, to assess their performance and identify any potential issues or areas for improvement.

Implementing and refining designs based on feedback and performance data and working with manufacturers to ensure that designs can be effectively and efficiently produced.

Requirements:

• Diploma or Bachelor's degree in mechanical engineering or a related field.
• 3 years of experience in mechanical design engineering, with a focus oncreating and developing mechanical systems and components.
• Proficiency with CAD software and other design tools, such as SolidWorks,and Inventor.
• Ability to prototype designs, assemble and test them.
• Experience with control systems (Arduino, stepper motors, sensors, encoders) in robotics products is a huge plus.
• Strong technical skills and understanding of mechanical engineering principles, including materials, stress analysis, and manufacturing processes.

The position offers a competitive salary and benefits package and the opportunity to work with a dynamic and innovative team. If you are a motivated and experienced Electrical and Electronics Engineer looking for a new challenge, please apply today.

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High precision machine design
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

We are seeking an experienced Agile Transformation Specialist to lead and collaborate on the development and implementation of a scalable Agile System across our Group.

• Contribute to the development of the Agile strategy and priorities for Group, including defining the roadmap, adaptation strategy, and principles for cultivating an Agile culture.
• Support the design and implementation of the Agile target operating model and beyond.
• Collaborate with stakeholders across Group to tailor the Agile framework to meet specific business needs.
• Advise and guide teams and stakeholders in adopting and implementing Agile practices within their respective areas.
• Assist in crafting and executing effective change management strategies and plans to drive the success of strategic programs and the adoption of Agile methodologies.
• Execute change management initiatives related to Agile adoption.
• Work closely with various stakeholders across the bank to ensure the effective implementation and tracking of change management activities.
• Support stakeholders in addressing challenges and resolving issues during the Agile implementation journey.

Qualifications:

• Capable of managing diverse stakeholders across the organization.
• Results-driven and focused on achieving outcomes.
• Creative and entrepreneurial, with the ability to develop solutions with limited information.
• Strong systems thinker and effective problem solver.
• Committed to continuous improvement, incorporating feedback and insights to enhance deliverables.
• Eager to learn new skills and gain experience through involvement in various types of projects.

Interior Design Apprentice

Are you a motivated and creative individual seeking an exciting career that will push the boundaries of your creativity? Elevate your skills with our Interior Design Apprentice Program, an immersive experience that combines hands-on learning with genuine fieldwork.

Program Details:

• Client Management: Learn to manage clients/leads provided by the company. No cold calling is required. You will also learn how to gather clients' needs and design requirements to ensure a comprehensive understanding of their vision of their homes.
• Design Collaboration: Work closely with the Design team to conceptualize unique design proposals. Create proposals that are not only aesthetically pleasing but also functional, and confidently pitch them to potential clients.
• Project Execution: Learn to plan and execute projects. Ensure client satisfaction and project success through meticulous attention to detail and effective communication.

Who We're Looking For:

We are in search of dynamic and driven individuals who thrive in a fast-paced environment that keeps them constantly on the move. While experience in Sales and the Creative Industry is advantageous, we provide in-house training to ensure your success in the role.

Join our team and embark on a rewarding career where your creativity and sales acumen will flourish. We offer a supportive work environment and comprehensive on-the-job training.

Ready to take the next step? Apply now and be part of shaping inspiring spaces in Singapore!

At Lumina Live, we craft extraordinary, immersive event experiences for top-tier luxury and lifestyle brands. We’re an experiential events agency known for turning visionary ideas into captivating realities that resonate deeply with audiences and embody the essence of our clients’ brands.

As our Head of Design, you’ll be at the helm of a talented design team, driving the creative vision and design execution across all events and brand exhibitions. From concept development to final realization, you’ll ensure each design is visually breathtaking and also aligns seamlessly with our clients' branding and strategic goals. You’ll work closely with clients, project managers, contractors, and cross-functional teams to deliver cohesive, memorable experiences that consistently exceed expectations.

Join Lumina Live to lead design with purpose, artistry, and impact.

BENEFITS

• Good remuneration package, including project-based incentives
• Profit sharing for qualified senior team members
• Great team environment
• Annual Dental, Optical & Medical Entitlements
• Hospital & Surgical Insurance Entitlements
• 2-days flexible Work from Home arrangements per month (bi-weekly)
• Off-in-lieu provided for work on weekends and public holidays
• Meal allowance for overtime work, during event set-up and event operations
• Good opportunities to work on overseas projects for wider exposure

SCOPE OF WORK

• Creative Conceptualisation: Drive innovative design concepts and themes for luxury and lifestyle events and exhibitions that captivate audiences. Initiate and lead group ideation sessions
• Output: Design and produce creative 3D renderings, highly detailed layout plans, elevation drawings and technical drawings
• Team Leadership: Lead and inspire a team of designers
• Team Supervision: Oversee the design workflow for events and branded exhibitions, including 3D renderings, layouts, technical drawings and shop drawings of the design team
• Resource Planning: Projects allocation for the design team to ensure efficient turnaround
• Inter-department Collaboration: Work closely with our account servicing team and production team in ensuring the design is aligned with the client’s requirements from conceptualization to production, and also ensuring budget alignment for designs
• Vendors Liaison: Communicate closely with vendors and contractors to ensure seamless execution of design elements and production details
• Site Assessments: Attend site visits and inspections to assess venue requirements and develop spatial layouts and designs that optimize the attendee experience
• Mentorship: Provide mentorship, guidance, and professional development opportunities to members of the design team, fostering their growth and skill development
• Timeline Management: Able to manage personal workload, delegate tasks to design team effectively, prioritize team workloads, and oversee project timeline to ensure timely delivery of design deliverables
• External Agencies & Freelancers Management: Managing workflow with external freelancers when specialized skills or additional resources are needed

QUALIFICATIONS

• Bachelor’s or Master’s degree in Interior Design, Exhibition Design, or a related field
• Minimum 7+ years of experience in lifestyle, luxury, fashion, or experiential event design
• Advanced skills in spatial planning, 3D modelling, and visualization, with expertise in photorealistic rendering techniques
• A dedication to creativity and a keen eye for aesthetics
• Strong portfolio of creative 3D design work and detailed technical drawings
• Proven track record in leading and managing creative teams; strong leadership and mentorship abilities
• Good understanding of clients’ brand strategy and design alignment for luxury and lifestyle brands
• Excellent communication and presentation skills, with the confidence to pitch ideas and concepts to high-profile clients and internal teams
• Proficiency in design software such as 3ds Max, Adobe Creative Cloud software, SketchUp, and AutoCAD
• Demonstrated ability to balance multiple projects, applying both creative vision and practical logistics
• Exceptional attention to detail and problem-solving skills, with a passion for delivering elevated, impactful design

Due to rapid growth, we are seeking an experienced seeking an experienced Design Manager (BIM) to strengthen our technical team. This is a full-time position, and it is perfect for someone with rich façade design knowledge and passionate about managing roles.

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Job Responsibilities

· Responsible for all BIM modelling works.

· Organize and plan a design works to meet construction schedule.

· Provide leadership and manage the team members in a professional manner, e.g., allocation of work, providing guidelines to them in drafting to maintain the quality, improving productivity, checking drawings and cutting list profiles etc.

· Ensure design, drawings, and all other deliverables meet the standard requirements, specifications and within scope of works.

· Identify additional work/variations to the Project Manager / Contract Manager for processing/approval of the variation order.

· To coordination between Design Team, Consultants, Main Contractor and other contractors.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, review and comment of shop drawings in terms of constructability, sequencing and ensure quality of the design is maintained throughout.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To resolve any unforeseen interface problems throughout the various design phases.

Job Requirements:

· Required skills: design development, design management.

· Knowledge and skills in Revit and Rhino

· Good knowledge and skills in BIM modelling.

· Possess good communications and people skills

· Good organization, coordination and leadership skills

· Minimum 5 years working experience in façade design.

Do what you Love, Love what you do!

Join us if you have years of expertise in various property projects. Your experience and knowledge can make a difference.

(Basic Salary + Commission up to $20k per month!)

Job Description:

• Represent sales function of the company within sphere of responsibility.
• Knows how to generate own leads, leads will be provided as well
• Business planning and strategy.
• Engage with prospective clients in person, utilizing your excellent sales skills and knowledge of interior design and carpentry to understand their needs.
• Help identify and drive sales performance.
• To visit client locations, showcase our portfolio of exceptional interior design projects and carpentry work, and provide personalized advice and recommendations.
• Prepare and present customized proposals and quotes, leveraging your expertise and the resources available to you to deliver exceptional value to our clients.
• Maintain accurate records of client interactions, project details, and sales activities to facilitate effective communication with internal teams.
• Continuously update your knowledge of industry trends, products, and techniques to stay informed and provide the best solutions to our clients.

Requirements:

• Have some experience in interior design landed houses, meeting or exceeding sales targets.
• Excellent communication and interpersonal skills to connect with clients and build lasting relationships.
• Strong knowledge of interior design principles, materials, and spatial planning.
• Familiarity with carpentry techniques, materials, and industry standards.
• Self-motivated, goal-oriented, and able to work independently as well as part of a team.
• Exceptional negotiation and closing skills, with a customer-centric approach.