We are looking for self-motivated instrument lead engineer targeting mainly at the Petrochemical, Bio, Pharmaceuticals, and the Oil and Gas industries. You will be exposed to different industries and be able to pick up plenty of experience and learnt not just on instrumentation but also application and plant operation process. The main scope of work is to lead our engineering team on the instrument service team and small-scale instrument installation project team which involves instrument maintenance, calibration, configuration, application, loop check, commissioning, install instrument, control cable laying, system panel cross wiring, update drawings, product after sales support. You are required on go on site for site survey, projecting bidding, supervise and coordinate site work and work together with our contractors.

Minimum 5 years of related experience is required with self-motivation and independant. Academic in instrumentation and control, electrical, electronic or mechatronic is preferred. Minimum ITE or Diploma related. Class 3 driving experience will be an advantage.

Successful applicants will join us as an extended family with work life balance and enjoy work flexibility and we believed in sharing with our employees.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a highly motivated Research Engineer to join our team, specializing in the hands-on experimentation and characterization of materials. The successful candidate will work closely with the research team to conduct materials characterization, perform electrochemical testing, and contribute to the development of innovative solutions for lithium battery recycling. This role requires a candidate with hands-on experience in material science techniques and electrochemical methods.
Key Responsibilities:

1. Perform experiments and characterization of materials using analytical techniques such as ICP, XRD, and FTIR.
2. Conduct electrochemical analysis, including cyclic voltammetry, LSV and other related techniques.
3. Prepare samples for testing and ensure proper calibration and maintenance of equipment.
4. Analyze and interpret experimental data, providing clear and concise reports to the research team.
5. Collaborate with cross-functional teams to ensure experimental objectives are achieved.
6. Maintain accurate records of experiments and uphold laboratory safety protocols.
7. Assist in troubleshooting and optimizing experimental procedures as needed.
8. Assist in lab procurement activities.

Qualifications

1. Bachelor’s or Master’s degree in Materials Science and Engineering, Chemical Engineering, or a related field.
2. Hands-on experience with material characterization techniques such as ICP, XRD, SEM and FTIR.
3. Proficiency in electrochemical methods is highly preferred.
4. Strong analytical and problem-solving skills with attention to detail.
5. Effective communication skills, both written and verbal, to document and present findings.
6. Ability to work independently as well as collaboratively within a team.
7. Knowledge of laboratory safety protocols and best practices.
8. Experience in data analysis and interpretation software (e.g., Origin).
9. Familiarity with additional characterization techniques is an added advantage.
10. Prior experience in an R&D or industrial laboratory setting.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Job Responsibilities:

• 2.5D/3DIC platform development.
• New unit module development and devices development.
• New process verification and qualification.
• New platform DSM setup
• Customer engagement and new product verification

Capability

• Solid semiconductor process integration and device characterization skills
• Semiconductor device physics and analysis skill.
• Experienced in 2.5D and 3DIC process development are plus.
• Skill on FMEA, control plan, DOE (design of experiment) and problem solving.
• Good communication, self-motived and avid learner

Qualification

• At least bachelor degree in microelectronics/electronics/electrical/physics/Materials engineering or other relevant fields.
• At least 7 years working experience in semiconductor R&D or related foundry experience of integration/process/device engineer.
• Working experience: 2.5D and 3DIC integration and device background are plus.
• Proficient English oral and writing skill.

Job Responsibilities

• Engage in project engineering of ACMV Systems.
• Manage and lead co-ordination of assigned projects/site & facilities;
• Liaise with clients and consultants on projects;
• Co-ordinate sub-contract works;
• Assist in site administration;
• Cost management of projects to be within budget;
• Preliminary design and budgeting for Design and Build tenders;
• Any other tasks assigned by the management.

Job Requirements

• Minimum 3 years of experience in ACMV works.
• Minimum Diploma in Mechanical Engineering
• Knowledge in AutoCAD drawings
• Possess coordination, problem-solving, leadership skills

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Rapsodo Inc. is a sports technology and analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping golfers of all abilities, including PGA professionals, to optimize their launch conditions, to allowing MLB pitchers to increase the efficiency on their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1,000 NCAA athletic departments.

We are seeking a highly skilled and experienced Radar System Engineer to lead the design, development, and validation of advanced radar systems. This role is critical in shaping our radar solutions by architecting cutting-edge systems, developing robust signal processing algorithms, and ensuring seamless integration with RF front-end components. You will play a pivotal role in optimizing system performance, conducting real-world testing, and collaborating with cross-functional teams to drive innovation in radar technologies.

Key Responsibilities:

• Architect and design radar systems, ensuring performance meets technical and operational requirements.
• Develop and validate signal processing algorithms and radar architectures.
• Architect and validate RF front-end systems, ensuring seamless integration with radar systems.
• Conduct testing, debugging, and validation of radar solutions in real-world environments.
• Collaborate with cross-functional teams on system integration, performance optimization, and troubleshooting.
• Perform circuit design and modifications to improve overall radar performance.

Skills & Qualifications

• Master’s degree in Electrical Engineering, RF Engineering, or a related field.
• Strong experience in radar system design, and signal processing.
• Proficiency with radar architecture, including system testing and validation.
• Solid understanding of circuit design principles.
• Ability to work independently and collaborate in cross-functional and diverse teams.
• Strong problem-solving skills and attention to detail.

Preferred Experience:

• Familiarity with industry-standard RF design tools and testing equipment.
• Experience in radar system performance evaluation and optimization.
• Knowledge of various radar technologies and applications.
• Having hands on RF design and validation experience in 24, 60 or 77 GHz is preferred.

If you are excited about the prospect of contributing to a dynamic, innovative, and driven environment while also being able to work independently, we invite you to submit your application.

Datacenter Operations Engineer

The Leaseweb APAC team is growing quickly and looking for talented individuals to join us. Our Data center Operations Team is involved in the daily management of our current 6 data center facilities in the APAC region (Singapore, Japan, Hong Kong and Australia) and we are about to open 3 more data center location in Singapore, Japan and Australia later this year. You will be responsible for the configuration and installation of the servers during the provisioning process in our data center in Singapore, and other data centers in the region as needed. You will also be assisting customers with the installation of network equipment in more complex designs.

Key responsibilities:

• Installation, configuration, relocation, and removal of server equipment at the data center
• The assistance of customers within data centers (for customers with their own racks/servers)
• Upgrade/downgrade of server equipment (memory/hard disks/etc.)
• Replacement of hardware and handling of all relevant administrative matters.
• Testing servers and server equipment in accordance with standards
• Work with remote hands partners within the APAC region to support installation and/or adjustment of servers.

Requirements:

• At least one year of hands-on experience working in a data center with servers
• Knowledge of various operating systems, especially Linux
• Knowledge of Hardware (Servers, Switches, KVM, Hard Drives, Memory etc.)
• Basic network knowledge (adjusting DNS/IP/Netmask/gateway/etc.)
• Certificate or degree in Computer Science or similar discipline preferably with an emphasis in Technology
• Professional and effective communication in English

What we offer:

• Competitive salary
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• A great working environment in a dynamic, international, fast-growing organization

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at the life at Leaseweb. For questions, please reach out to Danisha Ardilla - Talent Acquisition Specialist, at: [email protected]

Job Overview

Do you want to further develop your analytical mind to pinpoint core issue and earn the satisfaction of resolving it ? Do you like working with fellow team members to improve your job routine and environment ? Do you crave job security and yet be at the frontier of technology?

Join us at UMC (SG), a leading global semiconductor foundry company manufacturing microchips for use in the present and for the future. In course of your work, you will learn internationally acclaimed analytical skills and techniques to apply in your work and personal life. Have the chance to work with engineers from other fields and process to resolve and improve current procedures.Seize the opportunity to take part at senior level in Quality improvement competition host in Taiwan national level and earn accolades as an elite engineer with awards and certification. Be recognized as an engineer of high calibre in Singapore and internationally.

Responsibilities

1. Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality and lot handling
2. Maintain Equipment capability for production and meet production demand
3. Engage with Production line and Process Engineers to balance tool availability for production, troubleshooting and scheduled maintenance
4. Engage in Equipment troubleshooting and production quality improvement.
5. Evaluation of new equipment/materials and retrofits of Equipment for better efficiency / production quality
6. On-call support if emergency situation
7. Schedule shift on-duty

Qualifications

1. Possess at least a Bachelor's Degree in engineering in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering ,Physics, Automation, Aerospace Engineering
2. Able to think critically with strong analytical skills
3. Possess good communication skills and time management skills
4. Prior leadership or competition experience in school activities will be an advantage
5. Must be willing to commit shift work
6. At least 2 years with relevant working experience in semiconductor industry foundry

Are you a Mechanical Engineer with expertise seeking to make a valuable contribution to the success of a product?

Super Tomato is a company that offers a comprehensive range of automation services, including design, fabrication, and assembly, for our corporate clients. Our expertise lies in automation and robotics.

We are currently looking for a motivated and competent Mechanical Engineer to design our upcoming product.

As a Mechanical Design Engineer at Super Tomato, you will play a crucial role in designing our next product. You will be responsible for every stage of the process, from ideation and prototyping to design validation, manufacturing, and reliability testing.

Your task will be to solve a given problem statement and conduct research to 3D print, test, and eventually bring it for fabrication and final assembly.

Your experience with mechanisms will be critical as it is required in significant part of our projects.

This product will have a significant impact on the public, as it will be deployed in high-traffic areas. You will be able to build a robust portfolio and showcase your skills.

If you are shortlisted, we will invite you to our office for a physical viewing of the product.

Responsibilities

• Hands-on assembly
• Designing products from scratch
• Sizing of components
• Communicating effectively with the vendor
• Conduct thorough testing of designs
• Cost-down

Qualifications

Having prior experience in designing mechanisms is highly desirable for this position. In addition, if you possess experience working with systems that are involved in food handling, that would be a great advantage.

NBCUNIVERSAL INTERNATIONAL

We create world-class content, which we distribute across our portfolio of film, television, and streaming, and bring to life through our theme parks and consumer experiences. We own and operate leading entertainment and news brands, including NBC, NBC News, MSNBC, CNBC, NBC Sports, Telemundo, NBC Local Stations, Bravo, USA Network, and Peacock, our premium ad-supported streaming service. We produce and distribute premier filmed entertainment and programming through Universal Filmed Entertainment Group and Universal Studio Group, and have world-renowned theme parks and attractions through Universal Destinations & Experiences. NBCUniversal is a subsidiary of Comcast Corporation.

Here you can be your authentic self. As a company uniquely positioned to educate, entertain and empower through our platforms, Comcast NBCUniversal stands for including everyone. Our Diversity, Equity and Inclusion initiatives, coupled with our Corporate Social Responsibility work, is informed by our employees, audiences, park guests and the communities in which we live. We strive to foster a diverse, equitable and inclusive culture where our employees feel supported, embraced and heard. Together, we’ll continue to create and deliver content that reflects the current and ever-changing face of the world.

CNBC INTERNATIONAL

CNBC is the world’s number one business and financial news network. Its mission is to help the influential and aspirational make astute decisions to get ahead by providing live market updates, breaking news, in-depth analysis and exclusive interviews.

CNBC’s vast portfolio includes CNBC.com, the online destination for global business; CNBC PRO, the network’s premium subscription service that provides real-time global market data and market analysis, as well as a growing slate of live and virtual events where consumers can experience CNBC’s award-winning journalism, live.

With headquarters in New Jersey, London, Singapore, and Abu Dhabi, CNBC provides a truly global 24-hour business briefing for senior business leaders, the financial community and those with assets to invest or protect. Today the channel is available in more than 392 million homes worldwide. CNBC also boasts a growing audience across its social media and digital video platforms.

Visit www.cnbc.com for more information.

NBCUniversal is the parent company of CNBC.

OVERVIEW

As a Broadcast Engineer, you will be responsible for ensuring the seamless operation and optimal performance of all broadcast equipment and systems. Your role will involve maintaining high technical standards to guarantee the continuous and uninterrupted transmission of our originated channels. You will play a pivotal role in ensuring that all systems are fully operational, facilitating smooth broadcasting and minimal downtime. You will be the backbone of our broadcast operations, ensuring everything runs efficiently across CNBC Asia Pacific’s platforms.

KEY RESPONSIBILITIES

• Oversee the maintenance, troubleshooting, and operation of broadcast equipment and contribute to new installation projects
• Lead assigned engineering projects, managing the planning, design, and implementation phases
• Maintain and update system and infrastructure diagrams to ensure they reflect any changes to the facility or infrastructure
• Ensure continuous, uninterrupted operation of CNBC Asia Pacific’s originated channels
• Maintain and ensure the full operational functionality of production systems to support scheduled production activities
• Ensure post-production systems remain fully operational to meet post-production schedule
• Address and resolve technical issues promptly to minimize disruption to broadcast operations
• Perform routine and critical maintenance on on-air transmission equipment, studio equipment, Uninterruptible Power Supply (UPS), air conditioning and computers, ensuring timely and efficient service
• Perform front line maintenance for Mechanical & Electrical (M&E) systems, including air conditioning and UPS systems
• Liaise with external suppliers, manufacturers and third-party service providers as required to source fixes for any identified gaps
• Provide proactive, engaged technical support to the Engineering team and ensure all systems remain up-to-date and functional.

ESSENTIAL REQUIREMENTS

• Relevant experience in maintaining broadcast or mission critical IT systems
• Familiarity with video transcoding technology, video formats and codecs and file-based systems/workflows
• Proven ability to solve complex technical issues and a passion for continuous learning and tackling new challenges
• Ability to plan, prioritize and manage multiple tasks simultaneously, while effectively resolving problems
• Strong team player with excellent communication skills
• Willingness to work shifts including early mornings, late evenings, weekends and public holidays
• Willingness to serve as the on-call duty engineer, covering after office hours, weekends and public holidays.

DESIRED ATTRIBUTES

• Minimum 5 years of experience working in a similar role
• Hands on experience and knowledge with equipment such as Grass Valley Stratus/Edius System, Morpheus Ice, VizRT, GV Router/Multiviewer/Orbit, Ross systems and MediaKind systems
• Ability to read/update technical AutoCad drawings
• Familiarity with video transcoding technology, video formats and codecs, and file-based workflows
• Knowledge of or experience with Uplink Compression system, Video Contribution/ Distribution systems
• Knowledge of or experience in a broadcast live production environment.

The responsibilities associated with this position are not limited to the above description and may be modified at any time by the Company.

ADDITIONAL INFORMATION

As part of our selection process, external candidates may be required to attend an in-person interview with an NBCUniversal employee at one of our locations prior to a hiring decision. NBCUniversal's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law.

If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access nbcunicareers.com as a result of your disability. You can request reasonable accommodations by emailing [email protected].

Pre-Sales Solution Engineer

Our Sales team is the driving force behind our company's growth, handling the entire sales cycle from prospecting and business development to expanding our services with existing clients through effective account management. We pride ourselves on our dynamic, fast-paced, and multicultural environment, where ambition and innovation thrive.

What is the role about?

We are now searching for an experienced Pre-Sales Solution Engineer to provide technical knowledge, advice, and support to sales representatives and customers during the sales process to resolve requests regarding products and technical issues and to maximize the benefits derived from the organizations’ products and or services.

Key responsibilities:

• Provides presales technical expertise to the Product teams and customers.
• Provides technical input into projects and technical documents and identifies additional sales opportunities with existing customers.
• Installs and demonstrates the products at customer sites.
• Collaborates with product teams to develop and recommend products and services to meet customer’s requirements.
• Assist customers to identify their technical specifications and determine what documentation is required to incorporate the organization’s products into customer applications.
• Maintains up-to-date and comprehensive knowledge of the organizations and competitor’s products and/or services.
• Writes blogs, white papers, and other technical material to promote the products and technical capability of the company.
• Helps the customer, if needed, in the implementation of the new products and makes sure the defined specifications are in place and helps implementing them.

Who are you?

• 7 - 10 years of Technical Solution experience within IT (mainly Cloud)
• BA/BS degree in Business Administration, Sales, or a relevant field
• Experience in the IT Industry (IaaS)
• Experience in writing blogs, attending events, and making presentations.
• Experience working cross-functionally with internal and external stakeholders.
• Fluency in English and one Asian language (both, verbally and in writing) to liase with stakeholders in the region.
• SAP experience is a plus.

Benefits:

• Competitive salary + AWS + annual bonus scheme
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• 18 days paid time off
• Multi-cultural work environment (our colleagues are from over 60 countries!) in a company where you can truly make a difference

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at life at Leaseweb. For questions, please reach out to Danisha Ardilla, Talent Acquisition Specialist, at: [email protected]

ROLE DESCRIPTION SUMMARY

Thales is seeking suitable candidate for the position of Engineer (System Security).

You will be looking after the governance of the infrastructure and systems for mission-critical Command and Control (C2) system that Thales Solutions Asia (TSA) have developed for government agency. You will be part of a team to manage the security of system, to ensure the system adhere to the security policies, and is well protected from any threats, risks or exploits.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSystem Security Engineer, you are accountable for:

Provide security expertise and management services to support Authority in activities such as:

· Internal / external audits (IM8, Cybersecurity, etc)

· Policies compliance (IM8, Cybersecurity, etc), work with vendor on:

- Vulnerability management compliance reports and patch reports

- Filing of documents and Security Scorecard for audit purpose, to produce it as required

- Monthly logs review. E.g., privilege user activities

- Vulnerability/ Compliance Assessments

- Penetration Tests and Source Code Reviews

· Disaster Recovery (DR) and Business Continuity Planning (BCP):

- All relevant activities related to the DR and BCP planning

- Checks on system backup completion by vendor and datacentre

- Document update and implementations.

· ICT/Threat Risk Assessments (TRA)

· Monthly reviews of privileged accounts and non-privileged account, disable inactive accounts

· Seek security waivers (IM8, Cybersecurity Act, Circulars etc)

· Circulate security notifications/alerts to vendors and ensure status updates too all stakeholders including cybersecurity centre

· Security monitoring/tracking:

- Monitor alerts from SOC

- Update stakeholders regarding SOC alerts

- Review compliance reports with vendors to ensure that system is compliant

- Manage, track and update any security incidents/ issues to all stakeholders

- Review Incident Report (if any)

· Patching:

- Ensure patches are tested and verified before seeking approval for patching downtime

- Communicate system downtime to all stakeholders

- Ensure system availability after patching is completed

· Obsolescence management for software licenses, hardware, operating systems and certificates

· Security enhancement/ integration

· Support the submission of security clearance for related vendors

· Perform other related duties as assigned or requested

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Working hours will be 0830 hrs to 1800 hrs (for Monday to Thursday) and 0830 hrs to 1730hrs (for Friday), excluding weekends and Public Holidays

· Outside of working hours, to provide online support via emails and group chats when required based on the priority and severity of issues related to the system

· Able to cope in a highly pressured fast-paced environment

· Prior working experience in cyber security and vulnerability management is preferred

· Strong knowledge of security principles, best practices, and industry standards, such as NIST, ISO 27001, and CIS Critical Security Controls

· Able to understand security posture of systems

· Prior working experience in Project Management is a plus point

· Able to understand the system and software architecture, and user operations environment

· Willingness to pick up any new technologies

Education

Diploma or Bachelor’s Degree in Cybersecurity/ InfoSec/ Information Technology / Information Systems / Business IT or its equivalent

Relevant professional certifications, such as CISSP, CISM, CEH, or other security certifications

Experience

Minimally 1-2 years of experience in cybersecurity and supporting mission critical systems with very stringent SLA e.g. 99.9%

Well-versed in cybersecurity best practices and establishing of its policies

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

The Service Provisioning Engineer is responsible for planning, configuring, and deploying telecommunication services to meet customer requirements. This role ensures efficient provisioning of voice, data, and internet services, working closely with internal teams and external clients to ensure high-quality service delivery and customer satisfaction.

Make an Impact by:

• Service Deployment: Configure, test, and activate telecommunication services, including voice, ethernet, and DWDM services.
  Implement network solutions to meet customer specifications and contractual commitments.
  Perform end-to-end service testing and troubleshooting during the provisioning phase.
  Integrate new customer services into existing network infrastructure.
  
• Technical Support: Provide technical guidance to customers and internal teams during service activation.
  Diagnose and resolve provisioning issues within SLA guidelines.
  Provide Level 2/3 technical support for provisioning-related issues.
  
• Collaboration: Coordinate with network engineering and vendors for smooth service implementation.
  Work with third-party vendors and partners to deliver seamless connectivity solutions.
  
• Documentation and Reporting: Maintain accurate records of provisioning processes and configurations.
  Prepare and update technical documentation, workflows, and user guides.
  Generate reports on service delivery performance and provisioning timelines.
  
• Process Improvement: Identify areas for improvement in the provisioning process to enhance efficiency.
  Assist in automating repetitive tasks and optimizing workflows.
  

Skills for Success:

• Diploma in IT or equivalent.
• Ability to work under pressure and meet tight deadlines in a fast-paced environment.
• Minimum 3 years of experience.
• Working on Saturdays (9am – 1pm) on a rotating basis will be required after the candidate trained.
• Working on rotating after office hours standby will be required after the candidate is trained.

Overview

We are looking for result-driven candidates who would thrive under a fast-pace working environment and having a strong desire to make an impact in their organization.

What you will do

• Own the entire layout implementation process: schedule estimation, floorplanning, layout construction, physical verification and memory compiler leaf-cell creation
• Implement top quality layout which meet the specifications set forth by designers and layout leads while meeting the project objectives and milestones
• Diligently perform all physical & reliability verifications (DRC/LVS/ERC/etc.) on the layout designs and ensure the database is fully compliant with all requirements of tape-out flow
• Work closely with multi-functional members to optimize layout realization according to the desired power, performance and area optimization requirement
• Candidates with strong soft skills could be tasked to undertake project management, coaching of new hires/interns or workflow improvement initiative

What you bring

• Bachelor’s degree in Electrical/Electronic/Computer Engineering or equivalent
• WIth direct experience in custom Memory layout implementation (SRAM/ROM/TCAM/CIM) in advanced finFET/GAA process nodes
• Proficient in understanding DRM of advanced CMOS technologies and have a good understanding of deep sub-micron and DFM issues (eg. WPE, LOD effects, etc.)
• Strong knowledge in floor-planningtechniques at different hierarchies, with emphasis on power mesh planning, critical block placement, critical signal routing and top-down integrationflow
• Strong knowledge in executing and debugging various physical verification checks like DRC, LVS, ERC, Antenna, Density, ESD, LUP, EM, IR, etc
• Proficient in Synopsys/Cadence layout editors
• Ability in script programming (eg. Python, Tcl, Perl or C-shell) is a plus
• Team player and effective in cross-team communication and time management

Location: One North, Singapore

Why MediaTek

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

About the Company
Our client is a leading consumer research and analytics company committed to going beyond insights. With a passion for understanding people—how they think, feel, and act—they leverage smart automation, cutting-edge technology, and an exceptional team to deliver consumer insights like no other. Their proprietary mobile app collects data from a community of panelists, and their algorithms synthesize this data to uncover the drivers of personal and social motivations, as well as consumption habits.

Job Description

We are seeking a skilled Full-Stack Engineer (Front-End Focused) to join the Singapore office. In this role, you will work closely with a cross-functional team of product managers, designers, and engineers to build and enhance the company’s internal products.

Key Responsibilities

• Collaborate with product, design, and engineering teams to develop and enhance internal products.
• Write high-quality code across the full stack to deliver new features and functionalities.
• Develop and maintain functional and integration tests to ensure product reliability and quality.
• Troubleshoot and resolve production issues across multiple platforms in collaboration with operations.
• Leverage AWS services to deploy, manage, and optimize the application infrastructure.
• Requirements

Requirements

• Bachelor’s degree in Computer Science, Software Engineering, or a related field.
• A minimum of 3 years of experience in full-stack development.
• Proficiency in JavaScript/TypeScript and the MERN stack.
• Demonstrated experience in building responsive single-page applications.
• Expertise in front-end tools and technologies: React.js, Redux, JavaScript, HTML, CSS/SCSS, JSON, JWT, Node.js, and Express.js.
• Experience consuming and designing RESTful APIs.
• Hands-on experience with AWS services (e.g., EC2, S3, Lambda, RDS, CloudFront, etc.) to build, deploy, and maintain applications.
• Proven ability to deliver production-quality code that aligns with visual designs provided by UX specialists.
• Strong communication skills for cross-functional collaboration and understanding visual design requirements.
• Familiarity with Git and Agile software development practices (e.g., Scrumban).
• Experience with CI/CD pipelines via Git platforms such as Bitbucket or GitHub.

ABOUT AMS

The Airspace Mobility Solutions (AMS) business, part of the Global Business Unit Land and Air Systems, is providing leading edge Air Traffic Management (ATM), Unmanned Traffic Management (UTM), Security and Digital Aviation solutions for the Commercial and Defence sectors.

The AMS business manages 11% of the world’s airspace and with revenues of over 500 million Euros worldwide, is the global market leader in airspace management solutions. In Singapore, the business focus is the delivery and support of two key ATM solutions including TopSKY-ATC(HE) and LORADS-III.

This role will initially support the TopSKY-ATC (HE) product.

ROLE DESCRIPTION SUMMARY

The Senior Systems Engineer will engage with key stakeholders, including; solution architects, speciality engineers (Safety, Security, HF), ILS and ATM subject matter experts to prepare and deliver requirement and design changes with reference to a defined system functional baseline to satisfy customer needs and project/bid cost targets.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Systems Engineer, you are accountable for:

· Design, develop and document solutions to meet customer requirements, whilst ensuring the integrity of the System functional baseline and architecture

· Define solutions that deliver the best trade-off between requirements, cost, schedule and risk, which meet our customer’s needs

· Ensure the transversal constraints related to the function are considered (Safety, Human Factor, Performance, Security)

· Proactively participate in the technical reviews, including internal and with the Customer

· Proactively participate in technical working groups both internally and externally to define technical solution

• Proactively participate in PI planning and backlog refinement including contributing to the effort estimation

· Prepare Engineering Change Proposals (ECPs) and Problem Change Requests (PCRs)

· Develop and manage traceability of requirements using DOORS, including the Functional, Allocated and Product baselines.

· Perform peer reviews of engineering documentation written by other team members

· Support your Squad members (software, integration and verification)

· Support the Product Owner (PO) and Scrum Master (SM)

o Make recommendations on strategies to improve performance or productivity

o Identify risks, and proposing effective solution early and executing mitigation actions

o Provide input into the planning and coordination of program integration activities

· Promote knowledge sharing ensuring that work is captured sufficiently for re-use across projects

· Provide technical oversight to the Squads within the broader team, ensuring that the designed solution is implemented as per the design and in accordance to the schedule and cost and quality constraints.

· Define and report on KPIs for the function

• Work in accordance with the defined Thales processes and practices, and contribute to their improvement.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

• Degree in Engineering, Computer Science or related discipline

· Postgraduate studies in Systems Engineering (Desirable)

Essential Experience

· Proven experience in Systems Engineering (5+ years) including; Requirements, Design, Integration and Verification and Validation

· Experience with Systems Engineering Standards eg. ISO/IEC15288

· Proven experience in the ATM Domain and related standards eg. ICAO, Eurocontrol

· Proven experience in the development of products and projects in a variety of methodologies, with a particular focus on iterative/agile development

· Experience with Safety, Security and Human Factors standards and practices

· Demonstrated ability to achieve effective outcomes in a multidiscipline, multi-culture environment

· Coaching and sharing of his/her know-how

• Capability to manage various stakeholders having different objectives

· A positive attitude combined with excellent interpersonal and motivational skills.

· Comfort in facing and managing complexity

· Sound judgement and independent decision-making capability where necessary

· Excellent written and oral communication skills in English

Desirable:

· Experience in System Engineering tools eg. DOORs, Polarian, Jira

· Experience in Model Based Systems Engineering and tools eg. Capella, Enterprise Architect

· Experience in working in a Scaled Agile Framework (SAFe)

· French Literacy

General / Special Requirements

· Assist in ensuring a harmonious work environment in all departments that you are working with by upholding Thales' key values.

· An advocate for diversity and inclusion who will be actively involved in implementing change initiatives to achieve our diversity goals

· An advocate for a culture of continuous improvement

· An advocate for Accountability, transparency and curiosity

· Comply with all relevant company Occupational Health, Safety and Environmental policies and framework and work practices with the intent of preventing or minimising accidental exposures to self, colleagues, visitors and/or the environment and to ensure a safe work practises at all times.

· Comply with all relevant Company policies and procedures.

SPECIAL REQUIREMENTS

· Occasional international travel may be required

Project Overview

SMART CAMP (Critical Analytics for Manufacturing Personalized-Medicine) is an interdisciplinary research programme in Singapore (CREATE international research campus and innovation hub) and at the Massachusetts Institute of Technology (MIT). SMART CAMP addresses key technology bottlenecks in cell therapy manufacturing: (i) critical quality attributes (CQA) of safe, effective cell therapy products; and (ii) integrated process analytics to monitor and modulate those attributes. Our efforts are focused on allogeneic and autologous cell therapy products, including but not limited to cell sources including adult stem/progenitor cells and immune cells for treatment of specific cancers, tissue degeneration, and autoimmune diseases.

Responsibilities

The successful candidate will support interdisciplinary projects focused on translating candidate safety Critical Quality Attributes (CQAs) to improve the safety of cell therapy products and patient safety. He/She will work under the supervision of postdoctoral associates in SMART CAMP, with mentorship by principal investigators in Singapore and MIT. The successful candidate’s primary activities include but are not limited to routine mammalian cell culture maintenance and expansion, clinical sample processing and molecular-based activities according to established protocols in SMART CAMP, as well as general housekeeping and maintenance of lab inventory, consumables, SOPs and risk assessments.

Requirements

• Bachelor of Science degree, or Diploma in a biology-related discipline with minimum 1 year working experience
• Experience in mammalian cell culture is essential
• Experience in molecular biology is essential e.g., nucleic acid isolation, amplification (qPCR, dPCR or isothermal amplification assays) and detection
• Comfortable to work meticulously with clinical samples
• Comfortable/willing to work with BSL2 viruses
• Experience in cell manufacturing is an advantage
• Motivated to learn and achieve high consistency and reproducibility in experimental output
• Detail-oriented with good organizational skills, record keeping and time management

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified

Joining Razer will place you on a global mission to revolutionize the way the world games. Razer is a place to do great work, offering you the opportunity to make an impact globally while working across a global team located across 5 continents. Razer is also a great place to work, providing you the unique, gamer-centric #LifeAtRazer experience that will put you in an accelerated growth, both personally and professionally.

Job Responsibilities

• Help create immersive gaming experiences with a focus on innovation and creativity.
• Commit to developing phenomenal products that stand out and make a significant impact in the gaming industry.
• Work closely with cross-functional teams to rapidly prototype, design, and implement innovative ideas and projects.
• Provide development assistance at the system level to other departments as needed, ensuring seamless integration and functionality.
• Generate comprehensive documentation, including technical and functional specifications, to support project development and implementation.
• Participate actively in agile planning sessions, contributing to scope estimation and project planning for team initiatives.

Pre-Requisites

• BS/MS in Computer Science/Engineering or related field.
• 5+ years of software engineering experience.
• Extensive programming experience in C/C++.
• Experienced in developing system applications for Windows/MacOS/Linux/Android.
• Experienced in Driver development on Windows/MacOS/Linus/Android.
• Experienced in complex computation in 3D space.
• Experienced in game engines (Unreal and Unity).
• Strong analysis and problem-solving skills.
• Ability to work independently and collaboratively in a small team.
• Knowledge of game development a plus.
• Is a gamer.

As a key member of the mechanical engineering team, you will work on cross-functional team projects to develop and deliver new and innovative technical solutions for a robotic surgical system. Specifically, you will provide mechanical and mechanism engineering expertise in the R&D of surgical instruments. You will be working on designing mechanisms, structures and integrating actuators, motion components, and sensors to achieve innovative product functionalities.

The challenge for you is to successfully design and develop the surgical instrument in collaboration with other engineering teams, to achieve an efficient operation, reliable and safe product for clinical applications.

Requirements

· Bachelor or Master in Mechanical engineering.

· 5 - 8 years’ experience in the design & development of surgical instrument.

· Experience at least one cycle of product development.

· Able to communicate and write documents in Chinese (preferred).

· Familiar with regulatory and compliance requirements for the development of medical product.

· Strong technical capability in mechanism design and fabrication of precision and micro instruments.

· Strong technical capability to understand designs for mechanical structure and electro-mechanical assemblies.

· Good knowledge of various materials (metal and plastic), coating and manufacturing processes for precision parts.

· Proficient in 3D CAD modelling and simulation software like SolidWorks.

· Good knowledge and experience in GD&T, tolerance stack-up analysis.

· Good knowledge and experience in performing FEA and motion analysis and technical review of mechanism design.

· Able to travel on short notice for short period.

Desirable Traits/Personality

· An analytical problem solver to identify root causes, devise/evaluate/recommend optimal solutions to prevent future issues.

· Strong interests in surgical robotic system and instruments for medical application.

· Able to communicate technical information and build interpersonal relationships with the team members.

· Able to work independently and driven to achieve high standards.

· Intellectual curiosity about new technologies and innovations.

· Creative with critical thinking ability.

· Last but not least, a fun person to work with.

Responsibilities

· Work with cross-functional teams on detailed mechanical design at system level, sub-systems, modules, and components level.

· Support and review critical technical development related to precision mechanical instruments.

· Resolve issues and improve product reliability.

· Ensure the design and functionalities meet user needs, able to meet cost target and quality specifications.

· Perform analytical studies, risk assessment, mechanical verification, and validation.

· Co-ordinate design and fabrication activities locally or with overseas partners.

· As a mentor to junior engineers and enhance their knowledge and skills.

Ensure proper documentation (Design History File) for mechanical design.

Job Description :

• SIMS/TEM sample preparation, SIMS/FIB/TEM operations.
• Material analysis (EDX and EELS analysis)
• 6S and ESH maintenance
• Equipment maintenance and new technology development.

Requirements :

• Candidate must possess at least a Bachelor's Degree, or Master's Degree in Material Science, Electron Science, Electrical Science or equivalent.
• At least 1 year(s) of working experience in the related field is required for this position.
• Applicants must be willing to work in Pasir Ris.
• Able to work on shifts.
• Full-Time positions available.

About Us: We are a leading AI and robotics company at the forefront of technological innovation, dedicated to creating cutting-edge solutions that revolutionize industries. As we continue to grow, we are seeking talented Software Engineers to join our team.

Job Description: dConstruct is hiring Software Engineers who will be developing our robotics software stack and helping to perform software integration for specific use cases. You will be coding, calling into our software stack and creating applications which utilise our software stack to meet the needs of clients. You will be working with clients to understand their needs and in turn, implement their requirements accordingly. At the same time, you will be familiarised with the entire robotics development and software workflow.

Responsibilities

• Develop and integrate functionality from our software stack for external clients.
• Lead the test of applications and software integration works you create.
• Occasionally aid in tests and deployment of our robots in real world environments.

Requirements and Skills

• Good foundation in modern C++ programming
• Strong foundation in Data Structures/Algorithms
• Understand concepts in memory allocation, cache performance, data-oriented programming
• Comfortable in writing and debugging high performance native code
• Comfortable working on large code bases
• Able to do technical communication to understand and explain the needs of end-users
• Able to work independently with some guidance

Bonus Requirements and Skills

• Familiarity with Golang
• Understanding and familiarity with 3D Data Structures/Algorithms
• Experience with video and audio streaming

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

IC Designer, designing high frequency circuits targeting for transceiver applications, employing CMOS technology. The candidate needs to come up with novel architecture with speed, power, and area advantage compared to existing architecture.

The job also includes circuit design, pre and post-layout simulation, mask layout and PCB testing.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.