Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Job Description

Capabilities Development

*Lead the development and implementation of Group and partners OEMs’ (Original Equipment Manufacturers) new repair capabilities and report to the Industrialization Manager.

* Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.

* Perform self-assessments, engineering studies, build up justification file.

* Liaise with Quality for smooth airworthiness application for testing & repair capability integration.

*Liaise with the OEMs to clarify the requirements.

*Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.

* Drive the progress of the tasks, pilot projects’ milestones review with various stakeholders, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.

* Lead operations trainings and validation tests.

* Establish calibration requirements.

* Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.

* Report to management. Flow down relevant and timely information.

Support & maintain new capabilities

* Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support.

* Assist the lead equipment maintenance when required.

* Implement systems or components modifications following notification of change related to CMM, Service Bulletins (SB) or Service Information Letters (SIL).

* Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.

* Develop the Integrated Logistic Support at SEDSA levels.

* Help sourcing for material, suppliers, 3rd parties, alternatives.

* Review calibration requirements.

* Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost

reductions and applying lessons-learned from previous or bench-marked experiences.

* Ensure that communication between all stakeholders, Head Quarter, OEMs, Workshops, Quality, Sales, Continuous Improvement, Supply Chain, Customers, Suppliers, is optimum.

* Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.

* Report to management. Flow down relevant and timely information.

Profile & Soft Skills

* Be rigorous and organized, able to handle multi-tasking and priorities.

* At ease to report and present progress through regular reviews with the management.

* Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.

* Safeguard interest of SAFRAN Electronics & Defense Services Asia (SEDSA) and partners OEMs.

Health, Safety & Environment

* Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

* Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

* Actively participate and contribute to 5S initiatives.

Continuous Improvement and Innovation

* Lead by example the Continuous Improvement and Innovation initiatives in the company.

* Implement innovations.

* Pilot Company Lean and Improvement projects. Review progress, deliverables and gains for key innovations.

* Be a driving force in the Participative Innovation, ONE SAFRAN and Green Belts Improvement

* Spearhead the QRQC, SQCDPI, 5S, Root Cause Analysis, ONE SAFRAN methodologies to be best in class.

* Perform any other duties as assigned.

Experience and Qualifications:

a) Degree in Mechanical/Electrical/Aeronautical Engineering

b) At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment

c) Proficient in product support and trouble shooting procedures

d) Hands-on experience on design and wiring of electronics test fixtures.

e) Experience in OEM technical support, or related MRO operations/engineering

f) Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

g) Effective Project Management and interpersonal skills

h) Experience in calibration requirements and procedures

i) Proficient with Microsoft software applications

j) Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

k) Sound knowledge of quality systems such as ISO9000 and AS9110

l) Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects

m) Ability to multi task in a dynamic environment

n) Excellent communications skills. Well versed in written and spoken English

o) Able to think ahead, process data, make decisions and solve problems.

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Key Responsibilities

• Develop and execute complex projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design; attend design reviews and provide input to meet market requirement specifications (MRS) and hardware/software specifications. Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand system requirements. Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a top-level system.
• Participate in the design, development, and testing of radio-frequency components for semiconductor equipment, which includes high-power generators (up to 6 kW or more), matching networks, filters, or other tuning elements, with frequencies ranging from 300 kHz to 60 MHz.
• Write detailed specifications that cover all aspects of subsystem modules including interfaces to the product by using systems analysis to create a diagram. Create concepts for complex architectural design approaches. Lead team evaluations of architectures to provide recommendation for best system solution approach.
• Ability to fabricate or modify RF components to change their performance or enable access for instrumentation.
• Ability to instrument, characterize and troubleshoot RF sub-systems within larger semiconductor tool environment.
• Problem identification and troubleshooting a wide range of difficult, complex engineering problems in field of technical expertise, including serviceability and manufacturability.
• Support System Integration during the assembly and final testing of new product designs.
• Interface with other groups to workout design, systems architecture development and integration issues.
• Define all equipment interfaces and systems architecture and ensure they are up to date and documented.
• Work with vendors to develop design requirements and ensure delivery of parts that meet specifications.

Education Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Physics or related engineering field with a 1-3 years of relevant RF experience

Functional Knowledge

• Understand principles and operation of network analyzers, oscilloscopes, power meters, directional couplers, and other radio-frequency test equipment
• Knowledge of circuit theory and ability to develop analytical models of RF components
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful

Work Location

• Science Park II

Job Objectives

Design and develop both optoelectronics devices and integrated photonics sub-system platforms. Devices includes but not limited to SOA, gain chips, FP lasers, DFB lasers (CW and DML) and SLEDs. Photonics integrated platforms include but not limited to photonics integrated circuits, Silicon-based integrated platforms, standard/custom packaged modules, as well as optoelectronics sub-systems (i.e. includes both optical and electronics sub-modules) to meet design goals and requirements.

Duties and Responsibilities

• Perform simulation of optoelectronic devices (CrossLight, ALDS, Optiwave), optical ray tracing (Zemax, Optalix), thermal (Solidworks) and electrical (5Spice) properties of optoelectronics devices
• Analysis of optoelectronics device epi growth, participate in wafer fabrication process integration, mask design integration, device functionality and reliability performance characterization and test results.
• With reference to state-of-art competitors, simulated performance and data-mining internal test-results database, you will refine the design, fabrication specifications, and simulation model and parameters to optimize fit between design and measured outcomes.
• Report generation of design and simulation outcome with support of experimental data, where available
• Build up database of optoelectronics device design white papers, and management of all design documentation repository
• Responsible for leading/co-leading programs with several major global players in the development of photonic integration solutions to support the Silicon Photonics platform for datacom and sensing applications.

1. Development will be beyond simplex monolithic integration with regrowth for spot size converters and array devices, towards multiple functionality PICs incorporating active devices of lasers, modulators and detectors with passive devices of waveguides, polarizers, MMI splitters and optical filters.
2. Development of multiple functionality PICs designed to be compatible to Silicon Photonics to form a larger scale integrated System-on-a-Chip component.

• Lead and manage qualification and transfer of product to manufacturing upon development completion.
• All other reasonable duties, as assigned

Qualification Guidelines

Minimum Education

Masters (in semiconductor based light emitting optoelectronics preferred)

Minimum Experience

Minimum 10 years’ working experience with technical background in optoelectronics and wafer fab processes in optical laser component, photonics device system and sub-system

Proven working experience in optoelectronics design and development and program/project management in the photonics manufacturing industry

Can read mechanical drawing, and understand the schematic diagram.

Can use auto cad tool drawing the shop drawing.

Can coordinate with tunnel engineer and site supervisor settle the site works.

Can lead M&E team carry out the related works.

Can schedule the site works and arrange properly.

At least have 2 years experiences.

Willing to travel

Work at construction site.

have good communication and team work.

· Manage supplier quality performance.

· Manage suppliers to ensure the part supply to the factory meet the quality requirement.

· Manage supplier First-Article processes and part qualification.

· Ensure supplier quality records are updated promptly.

· Responsible for ensuring that Supplier Quality Issue is resolved.

· Conduct External audit to ensure conformance to specified requirement.

· Support Internal, 3rd Party & Customer System audits.

· Report Supplier Quality Performance for management reviews.

· Support product/process qualification when necessary.

Skills Desired:

· Vendor management experience is preferred.

· Good understanding of quality management system & tools

· Self-motivated and deadline oriented.

RESPONSIBILITIES:

• Generate layout drawings, procedures, and technical specifications.
• Draft comprehensive scope of work for all mechanical engineering tasks.
• Produce technical specifications, requisitions, and detailed drawings (including plans, elevations, and arrangements).
• Coordinate engineering designs and manage interface-related issues.
• Strategize, develop, and innovate new products in alignment with project requirements.
• Enhance existing product designs for optimal performance and efficiency.
• Offer technical expertise to bridge the gap between product design and manufacturing processes.
• Lead and oversee investigations into the form and function of design features.
• Develop and refine technical drawings of mechanical parts and assemblies to convey design intent and guide manufacturing processes.
• Create communication documents to effectively convey design details to clients or manufacturing partners.
• Establish and maintain design history files for documentation and reference purposes.
• Validate system and product capabilities by designing and conducting feasibility studies and testing methods.
• Innovate manufacturing processes by designing and adapting equipment for component fabrication, assembly, and installation.
• Ensure system and product quality through the design and implementation of testing methods; verify finished product and system capabilities; validate fabrication, assembly, and installation procedures.

REQUIREMENTS:

• Hold a Bachelor's Degree in Mechanical or Mechatronics or any related field in Engineering.
• Possess a minimum of 5 years of experience in Engineering and Product Design, specifically in pressure vessels.
• Proficient in SolidWorks with a strong understanding of AutoCAD 3D or equivalent software, as well as valve differential designs.
• Familiarity with NFPA and relevant international pipeline design Codes and Standards is essential.

Software Engineer

We are looking for a skilled Software Engineer with extensive experience in .NET C# programming, primarily in Blazor Technology. The ideal candidate will be responsible for delivering well-designed and configured software systems such as in web blazor applications and desktop applications (WPF, C#) that cater to our internal Engineering demand. He/She will also provide technical expertise to the Managers.

The candidate should have at least 2 years of .NET C# programming experience, strong skills in software design, a passion for .NET development and innovation and excellent communication skills.

Responsibilities:

You will be working with the Test Measurement Centre (TMC) team and the Test Development Engineer who will provide the data sources and locations of our devices data.
You will be designing, documenting, developing and delivering software products, specifically responsible for the following as appropriated by the TMC Team for the projects:
Developing .NET C# software modules including Blazor Server Apps,
Writing SQL Server queries, MongoDB transactions and stored procedures
Functional and Interface Specifications
Writing acceptance and deployment reports and executing them
Site Test Specification/Reports
Take a leading role in software documentation, development, configuration and testing on assigned projects
Participate in reviews (document, design, functionality and code reviews)
Actively contribute to the improvement of software development processes
Development of User Manuals and Training the end users


Requirements / Qualifications:

Minimum 2-3 years of .Net C# programming experience
Experience in Blazor ASP.NET \ WinForms and WPF GUI
Extensive experience in design techniques and tools as used in Software
Bachelor's degree qualifications or equivalent in Software or Computer Engineering
Experience in using Telerik components is an advantage
Experience in SCRUM master roles and experience in a working SDLC will be advantageous
Some knowledge and workign experience in relational databases (MySQL) and Non-relational DBs such as MongoDB.
Knowledge of design patterns including Singleton, MVVM, Event Driven, WinForms and WPF
Knowledge of Microservices and XML serialization
Superior written and verbal communication skills

Job Desription

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Job Desciption

• Knowledge in AutoCAD
• MS Office
• Well versed and relevant design experience in at least one or more systems in telecomunication

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Job Description

• Develop, implement and maintain advanced methods, operation sequences, and process for the fabrication of gas distribution system components.
• Collaborate closely with cross-functional engineering teams to ensure the successful release of product improvements and new system designs.
• Lead the launch, approval, implementation, and documentation of engineering change requests to support design engineering and production operations.
• Estimate manufacturing costs, define time standards, and provide tooling and process recommendations to optimize efficiency and quality.
• Continuously identify opportunities to reduce manufacturing costs while improving product quality through rigorous analysis and problem-solving.
• Collaborate with test engineering to design and develop test fixtures, and assist in coordinating test fixture sourcing activities.
• Collect operational and test data, evaluate results, and take corrective and continuous improvement actions to optimize system performance.
• Evaluate work methods, procedures, and policies, actively contributing to the development and maintenance of streamlined business processes.
• Conduct root cause analysis and provide comprehensive failure analysis reports for issues encountered during assembly and testing of systems, with a focus on New Product Development projects.
• Perform Process Failure Mode, Effects, and Criticality Analysis, ensuring robust quality processes are in place.

Job Requirements

• Diploma/Degree in Mechanical/Manufacturing Engineering.
• Proficiency in CAD software, such as Solidworks and Autocad.
• Strong knowledge of mechanical design principles and analysis.
• In-depth understanding of materials, manufacturing processes, and quality control in semiconductor equipment manufacturing.
• Meticulous attention to detail and a strong commitment to delivering high-quality work.
• Ability to work collaboratively in a team environment while also being self-driven and able to work independently.
• Outstanding communication and interpersonal skills, enabling effective collaboration with colleagues and stakeholders.
• Familiarity with industry standards and regulations specific to semiconductor equipment manufacturing.

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Key Responsibilities

Performs startups through Tier III including process qualifications with assistance. Understands all qualifications performed on tool and verifies operational quality (process qualification) of systems equipment including ability to use customer’s metrology equipment. Plans for and completes all levels of preventative and corrective maintenance within timelines. Troubleshoots key technical issues at the component level. Diagnose and recommends solutions for complex system downs. Uses process data to diagnose hardware problems. Resolves some sustaining process issues on well characterized tools.

Troubleshoots key technical issues at the component level. Uses routine process data and on site data logging functions to diagnose system downs. Diagnoses and resolves hardware and software issues. May resolve sustaining process issues with assistance or on very well characterized tools.

Performs complex retrofits. May occasionally organize and lead retrofit activities.

Ensures the correct revs of procedures and schematics. Identifies and corrects procedural issues. Applies global best practices to solve problems for their customer. Occasionally contributes to global best practices. Creates methodologies and procedures as necessary. Participates in patent processes/discussions and documents IP as appropriate.

Anticipates and responds to fab issues including communicating with CE’s in other locations. Drives corrective processes through key stakeholders (PBG, Customer Spec owners, ECO owners, GPS, etc.) or escalates as appropriate. Communicates findings to others and provides suggestions to improve checklists and procedures. Participates in customer meetings and escalations.

Within assigned scope, assist management in operation of site service business. Assists Applied Materials field management in establishing and achieving objectives for assigned accounts. Keeps field management informed on customer perception of system performance. Takes initiative to avoid and resolve customer problems. May occasionally initiate projects to drive down costs or increase uptime.

Provides technical guidance to less experienced CE’s on complex system problems including sustaining process issues. Instructs customers in the operation and maintenance of system.

Follows all checklists and procedures, including safety.

Functional Knowledge

• Has developed depth of skills in a range of processes, procedures and systems, or acts as the technical expert in an area

Business Expertise

• Uses knowledge of how related teams impact achievement of objectives
• Understands the impact of various actions/decisions on the account(s). Takes initiative to avoid and resolve customer problems.

Leadership

• May act as a team lead, may allocate work to more junior team member; provides subject matter guidance to more junior team members

Problem Solving

• Gathers and analyzes data to identify and solve problems that arise with little or no precedent

Impact

• Impacts own team and other teams whose work activities are closely related; suggests improvements to existing processes and solutions to improve the efficiency of the team

Interpersonal Skills

• Evaluates and communicates technical content in a clear manner

Job Description:

1. Supplier Quality Management

• Develop and implement supplier quality management programs.
• Conduct regular audits and assessments of supplier facilities to ensure compliance with quality standards and regulatory requirements.
• Evaluate and approve new suppliers based on quality performance and capability assessments.

2. Quality Assurance and Control

• Establish and maintain incoming material inspection processes and criteria.
• Monitor and report on supplier performance, including quality metrics, delivery performance, and corrective actions.
• Work with suppliers to develop and implement corrective action plans to address quality issues.

3. Continuous Improvement

• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.

4. Collaboration and Communication

• Serve as the primary point of contact for all supplier-related quality issues.
• Work closely with internal teams, including engineering, production, and procurement, to address quality concerns and improve supplier relationships.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders.

5. Documentation and Compliance

• Ensure all supplier quality documentation is accurate, complete, and up-to-date.
• Maintain records of supplier audits, inspection results, and corrective actions.
• Ensure compliance with industry standards, customer requirements, and regulatory guidelines.

6. Training and Development

• Provide training and guidance to suppliers on quality standards, processes, and requirements.
• Mentor junior team members and support their professional development.

Job Requirements:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 7 years of experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong knowledge of semiconductor manufacturing processes and quality standards.
• Proven experience in conducting supplier audits and implementing corrective actions.
• Excellent problem-solving, analytical, and organizational skills.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers and internal teams.
• Preferred Skills: Certification in quality management (e.g., CQE, Six Sigma, Lean Manufacturing) is highly desirable.
• Proficiency in quality management tools and software.
• Experience with regulatory requirements and standards specific to the semiconductor industry.

• Manage engineers & contractors to peform preventive maintenance, repair maintenance, building and ground services to achieve minimum disruptions to operations
• Manages upgrading projects to ensure projects are on schedule and within the budget, complies with regulatory and technical requirements
• Works closely with project lead on project progress
• Coordinates with plant personnel when operation is affected
• Checks and builds per specification requirement
• Responsible for environmental and safety activities
• Implements lean energy program to drive improved energy efficiency
• Any other ad-hoc tasks as and when assigned by supervisor

Education

• Minimum Diploma in either Facility Engineering or Project Management

Experience

• Minimum 3 years of relevant working experience

Skills

• Desired Knowledge (1) Compressed Air systems (2) Cleanroom system (3) Air Con systems or other plant facilities equipment maintenance & (3) Operating knowledge in a manufacturing environment