Job Description & Requirements

UTILITY ENGINEER (LTA Tunnelling Construction)

- Report to Site Mgr/Construction Mgr/Coordination Mgr/PM/PD

- Provides coordination of construction of the project t pertaining to the utilities.

- Ensure the project needs are met without compromising the reliability of the utility system

- Ensure all utility documents are properly submitted and filed

- Conduct routine site inspections to ensure adherence to relocation plan

- Review project documentation from consultant for compliance with all relevant regulations, codes, guidelines and policies

- Schedules and attends all necessary and related pre-construction conferences for utility relocations

- Reviews utility relocation plans as compared to project construction plans to identify and correct potential utility conflicts prior to construction

- Coordinate with engineering and design consultants in order to find the best solution cost-frame time

- Liaise with construction manager to ensure that the utility work supports construction sequencing and respective deadlines are met and on schedule

- Resolve site inquiries, attending site meetings and performing site inspections during construction

EDUCATIONAL QUALIFICATION:

- Minimum Diploma/ Degree in Engineering technology

EXPERIENCE / SKILL REQUIRED

- Must have at least 5 years of engineering working experience in the relevant field (ideally with LTA projects)

- With 2 years experience in the Coordination with utility agencies for similar projects

- Good interpersonal and communication skills and able to interact with people of all levels

- Experience with utility design or utility construction activities (gas, water, sewer, telecom)

- Experience in coordinating and scheduling installation of utilities

Conduct primary technical reviews of the contractors work and ensure approvals are obtained where relevant

Evaluate and advise on electrical related design changes and non-conformances to ensure fulfilment of the requirements

Identify new business opportunities and have involvement in bids/tenders etc

Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies

Independently applies knowledge and complies with quality program relative to assigned tasks

Oversees collection, assimilation, and management of data for engineering work

May offer other services to the clients

Provide electrical engineering and technical expertise to ensure the safe and reliable operation of electric power systems in processing facilities worldwide

Originate plans and develop strategies for power systems worldwide to ensure electrical reliability and safety in the most cost effective manner

Participate in engineering design through all phases of the process

Preparation or supervision of drawings for plant general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.

Some electrical design will also be required for integration and system development of electro-mechanical systems

Assist in design and documentation of vehicle electrical architecture

Develop Project Timelines in support of Program milestones

Development and Release of Engineering Component and Assembly Drawings

Resolve Test Issues and Document Through the use of the PDCA Process

Test and certification report generation

Provides electrical engineering and project management expertise in support of projects, to ensure stated quality, operational, safety, schedule and budget objectives are met

Provide training to electricians on safety

Ensure complete and current electrical prints for all machines

Maintain documentation for all electrical components used

Organize documentation and electrical prints

Design Circuit Card Assemblies (CCA) using Altium Designer for Schematic, and layout

A working knowledge of cost estimating, code review, field investigation, report and memo writing and other similar electrical engineering related tasks

Power distribution, essential power systems including generators and UPS, Substations, transformers, metering, primary and secondary switchgear, motor control and motor control centers Life Safety including Fire Alarm system design

Prepare reports, proposals, and tender/bid submissions, budgets, project plans and other supporting documentation as required

Develop standards related to our electrical engineering practice, ensuring best practices for project delivery, and when applicable sustainable building constructions

Lighting, Lighting Control systems.

Manage internal and external stakeholders - Support and run the commercial and contractual side of projects

Evaluates and test components

Ensures design, fabrication, maintenance and repair methods/processes are developed executed in a manner, which supports all quality standards

Develops, designs low voltage (600V) and medium voltage (15kV) and high voltage (115kV) electrical distribution systems for building, industrial and utility facilities

Performs electrical system design for switchgear, switchboards, motor control centers, variable frequency drives, generators, transformers, distribution panels and various raceway systems

Designs underground medium voltage distribution systems and sizes electrical low voltage (600V) and medium voltage (15kV) and high voltage (115kV) equipment

Serves as the Engineer of Record for drawings, specifications and reports prepared under their direction

Performs field investigations, field inspections and witnesses start-up/acceptance testing activities

Works effectively in a collaborative environment with Architects, Mechanical Engineers, Civil Engineers and Structural Engineers on large multi-discipline projects

Coordinates with Mechanical, Fire, Architecture, Structural and Civil disciplines for comprehensive building design or modification.

Provide instruction on electrical drawing and using AutoCAD electrical

Work with PCB Fabrications houses to develop the stack-ups, dieletric materials, routing guidelines, and any Design For Manufacturing (DFM) suggestions

Write AFCEs

Determine project specifications

Compare equipment and select manufacturer

Work with on-shift maintenance personnel to find and fix problems on down equipment

Engineer solution to fix root cause and prevent recurring failures

Create and conduct training, if required, to prevent future downtime

Design equipment upgrades to optimize machine performance

Estimate total project costs and estimate project payback

Responsible for designing, testing, supporting, and troubleshooting components of low-voltage and medium-voltage electrical systems operating up to several megawatts

Develop system-level and/or physics-based models of components and devices in support of new technology development, project engineering, and test & evaluation

Develop and/or improve the test methods and procedures

Write test procedures and technical papers

Responsible for the design, analysis, and testing of advanced power electronic systems for both military and commercial applications

Will lead and direct small technical teams (engineers, designers and technicians) in solving complex problems

Responsible for writing requirements, specifications, and design reports

Act as an expert and advisor in power electronics engineering and electrical engineering area

Advises and directs the activities of assigned programs and/or projects to achieve technical objectives

Responsible for digital and analog design with power electronics emphasis and must be able to do system level design and analysis

Requirement:

Degree in Electrical and Electronics Engineering.

Knowledge of international codes & standards IEC, ANSI / IEEE

Significant experience in the power generation industry strongly desired

Prepare Electrical Engineering deliverables such as calculations, equipment specifications, datasheet

Working knowledge of “AutoCAD” or equivalent CAD system, MS Project, and MS Office

Track record of launching high volume electronics products, especially low power platforms

Knowledge of the PCB design process and tools experience with Cadence or Altium products

Proficiency with EE lab instruments and their use in verification and troubleshooting

Experience with ODM, JDM, or CM models of product development

Self-starter and creative problem-solver

Resident Engineer

Available job sites at various locations:

- Ang Mo Kio

- Jurong West

- Bugis

- Hougang

-West Coast

Description:

-To assist Qualified Person (Supervision) in ensuring the works is carried out in accordance to approved drawings

- Manage a team of Resident Technical Officer(s) in performing their duties on site supervision

- Liase and conduct inspection with Contractor and Consultant

- Oversee all aspects of the project and keep record of works, materials, attend meetings, keeping minutes of meetings and discussions etc.

Requirements:

- Accredited as a Resident Engineer with IES/ACES

-Degree in civil and structural engineering from a University accredited by the Professional Engineers Board, Singapore

-Literate in English and have a good knowledge to use computer softwares. E.g. Microsoft office

-Experience in LTA project sites would be a plus

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Service Engineer

Job description

1. Perform the maintenance service in a proper and correct manner as stated on the checklist

2. Attend emergency breakdown service as instructed by the team leader

3. Carry out testing & commissioning for A&A work and run the small size of project

4. Provide technical support to the Application Team

5. Co-ordinate with the Project and Application departments and provide necessary support when required by the Team Leader

6. Support the systems testing related activities with the Project and Application Teams

7. Liaise with sub-contractor to perform site survey for A&A work and to provide detailed information on equipment quantity and method for the installation to the relevant parties for preparation of quotation

8. Deliver good standard of workmanship and ensure accurate quantity and quality of the equipment to be installed at site

9. Conduct in-house training when is required

10. Perform standby duty and other ad hoc duties as assigned

Key Requirements

• Diploma/ Degree in Mechanical/Electrical/Electronic Engineering
• 2 years’ experience in security systems
• Strong knowledge in network and security systems, able to troubleshoot and rectify the network and systems related issues.

Remuneration:

• $2,500.00 - $3,600.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $3,600.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Job Description:

• Manage the project site by overseeing the day-to-day running of all matters related to the construction of the project as designated by the Project Manager.
• Plan, implement and monitor the work schedules according to the master and detailed work programmes.
• Assist in the planning and sequencing of the construction operations according to the Project Quality Plan.
• Liaise with client's representatives on site and with all subcontractors.
• Conduct inspections and checks on work performed by all subcontractors.
• Assist in the evaluation and resolution of any discrepancies and problems arising during construction and which has an effect on quality of the works.
• Ensure that updated drawings including shop drawings are used by for all construction.
• Co-ordinate the handing over of completed works to the client and completion of the necessary rectification works.
• Prepare project-related reports as required by the Project Manager or Construction Manager.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• PE Board Recognised Degree
• At least 5 Year(s) of working experience in the related field is required for this position.

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

(2 years contract renewable)

• 5 days, 8.30am- 5.50pm
• Location: East, and client's site whenever required

1. Associate System Engineer

• Salary: S$ 2,800 ~ 3,000 + allowance

2. System Engineer

• S$ 3,500 + Allowance

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Responsibilities:-

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Responsible for designing and detailing of Civil and Structural Engineering works to ensuring that the Structure sections of the works are constructed in accordance with the contract requirements
• Responsible for timely submission of reports and completion of projects for tender/submission with target dates
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Manage projects to meet the time, cost and quality objectives
• Liaise with consultants, contractors and authorities from inception to completion of projects
• Supervise the structural works of sub-contractors and work closely with site operations staff to meet the project schedule.
• Coordinate and monitor work progress at site including periodical site
• Responsible for all inspection activities and attending meetings during course of construction of projects being carried out
• Monitor site safety and liaise with the Safety Engineer

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years HDB experience in Building Engineering main-con companies
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Able to work independently and a team player
• Good analytical, supervision, and communication skills

• Excellent communication skills

• Interpersonal skills, active listening

• 1 year previous Service desk or equivalent experience

• Attend to Phone, Email and any other online queries where applicable

• Excellent organisational skills

• Managing incidents including business expectations and communication

• Strong knowledge of Microsoft based operating systems, MS Outlook and MS Office

• ITIL Knowledge will be a plus

• Comply to process and procedures

• Administrative tasks

Must have Talent / Skills

• Minimum a diploma in Information Technology or equivalent

• Minimum 1 year of relevant working and technical IT experience

• Pleasant disposition and good social etiquette with good spoken and written English

• Good telephony and problem solving / troubleshooting skills

• Good customer service attitude

• Process Driven

• Able to liaise with Customer for daily operations

Key Responsibilities:

• Oversee and manage the day-to-day operations of low-voltage (LV) electrical installation projects, coordinating with contractors, suppliers, and on-site teams to ensure smooth execution of work.
• Conduct regular site inspections to monitor progress and ensure compliance with project plans, safety regulations, and quality standards.
• Review and interpret electrical schematics, layout drawings, and technical documents, while using AutoCAD software to create, update, and revise electrical drawings as required. Provide technical guidance and troubleshooting support for on-site electrical installations.
• Prepare work schedules, allocate resources to meet project timelines, and maintain accurate records of site activities, materials usage, and project milestones.
• Report progress and address any issues to project managers and stakeholders promptly.
• Ensure that all electrical installations meet regulatory and safety standards.
• Conduct regular safety briefings and enforce adherence to safety protocols on-site.
• Act as a point of contact between the project team and site personnel, effectively communicating with clients, consultants, and stakeholders to ensure mutual understanding and alignment on project goals.

Requirements:

• Diploma/Degree in Electrical Engineering or a related field.
• At least 2-3 years local LV (low voltage) electrical installation projects background.
• Proficiency in AutoCAD for electrical drawings is essential.
• Familiarity with local electrical codes, standards, and regulations.
• Strong organizational and problem-solving skills.
• Fluency in Chinese (spoken and written) is preferred to communicate with Chinese-speaking site personnel.
• Ability to work independently and as part of a team in a fast-paced environment.

Role and Responsibilities

• Manage and monitor all installed systems and infrastructure
• Install, configure, test and maintain operating systems, application software and system management tools
• Participate in the design of information and operational support systems
• Liaise with vendors and other IT personnel for problem resolution
• Provide enterprise-wide support to a high level of Microsoft Windows, VMWare & Linux Redhat.
• Provide support in a 24/7 environment and would require to work on-call at least 1 week every month

Requirements

• Diploma in Computer Science or related technology disciplines
• Possess initiative, positive attitude and strong passion in operation support
• Good communication skills and able to work independently;
• 2+ years of experience
• Proficient with Windows Server, VMWare and Linux Redhat

The incumbent will provide day-to-day technical support for the production line including cleanroom, sub-assembly, optical build, and laser final test areas. To maintain the quality, reliability and cycle time standards of the laser build process and implenet corrective actoins for problems reported.

Requirements:

• A bachelor's degree in engineering or its equivalents
• At least 3-5 years of relevant work experience in Photonics or related maufacturing field
• Technical expertise pertaining to manufacturing, assembly & test processes for mechanical assemblies, PCBA and optical components

Interested candidates, please forward your most updated resume to [email protected]

The Assistant Chief Engineer is responsible to assist the Chief Engineer in the operation and maintenance of the building, to ensure a high standard of upkeep and maintenance, to the satisfaction of the building owner and guests / tenants.

Responsibilities:

• To assist the Chief Engineer to implement the execution of preventive maintenance and repair schedules of all machinery, equipment and facilities and see to the proper execution by employee staff or external agencies or contractors.
• To assist the Chief Engineer to prepare the duty roster of maintenance staff.
• To conduct daily briefing of staff and assign duties to staff to carry out the necessary building operation and engineering works.
• To assist the Chief Engineer in the execution of administrative duties such as inventory management, record keeping of engineering work / repair, etc.
• To assist the Chief Engineer to ensure good housekeeping standard of the engineering workshop and that all safety procedures and rules are adhered to.
• To assist the Chief Engineer to obtain quotations for all the necessary works by external agencies / contractors and for all necessary purchases from suppliers.
• To contribute towards cost management of the department and ensure that there are no wastage, negligence or dishonesty.
• To assist Chief Engineer in profits and losses costing and planning.
• To ensure that the staff in the department provides a high standard of engineering services which meets the expectations of the building owner / tenants / guests / shoppers
• In conjunction with the Chief Engineer, to ensure that that the maintenance staffs are adequately deployed and that they are properly trained to discharge their roles.
• Mentor, coach & orientate new as well as existing staff in their roles & responsibilities towards the department goals
• In conjunction with the Chief Engineer, to assist the maintenance staff retention and to take appropriate measure in furtherance of staff stability.
• To ensure that effective fire safety, work place safety practices and enforcement of local Health & Safety regulations are met.
• Ensure to assist department to comply all authorities' requirement
• To ensure that Hotel management is satisfied with the quality of services rendered by the Engineering department.
• To ensure that the Hotels guests receive an adequate level of engineering services that satisfies their concerns and needs.

Job Requirements:

• Candidate must possess a Polytechnic Diploma in Electrical, Mechanical or Building Services or equivalent. Preferably with Engineering Degree.
• Preferably with minimum 3 years or more of experience in Engineering management in similar capacity
• Able to deal with suppliers / contractors / government bodies
• Able to manage various projects at any point of time.
• Exposure to purchasing, cost control beneficial
• Able to use Microsoft Word, Excel of computer for preparing reports
• Sound Knowledge of Hotel Engineering and Management
• Sound knowledge in Mechanical / Electrical / Building Engineering
• Possess skills in maintaining, troubleshooting and repairing of building equipment
• Good communication skills (verbal and written), able to resolve any conflicts.
• Good coaching skill, ability to lead the junior maintenance staff.
• Willingness to learn and work as a team member
• Possess high level of integrity and respect for others
• Able to withstand huge pressure and stress towards work
• Outgoing personality
• Responsible to his work, hardworking, good initiative with cost saving in mind
• Self-confident, self esteem
• Good problem solving skills necessary
• Able to put in long hours when required and 24 hours standby for any technical problem occurring
• No criminal record
• No external commitment that clash with work

Job Description

• Day-to-day supervision on site
• Coordination and monitoring of progress amongst various subcontracting works
• Proficiency in CAD software, checking drawing discrepancies, coordinating with client’s representatives, consultants and sub-contractors on technical matters
• Attend meetings, inspections, liaison with QP's, government body and clients
• Responsible for the upkeep / submission of reports including safety and other compliance matters

Job requirement

• Prior experience with landed property construction in Singapore
• Experienced with Structural and architectural works for Building Construction
• Degree in Civil Engineering with relevant safety and construction certificate
• Kindly include project type in your resume

We are seeking highly skilled Commissioning, Qualification, and Validation (CQV) Engineers to provide risk-based CQV services for pharmaceutical and biopharmaceutical clients. This role offers opportunities to work across various areas, including process equipment, CIP/SIP (Clean-In-Place/Sterilize-In-Place), and process manufacturing systems, with a focus on maintaining compliance with regulatory standards.

Key Focus Areas:

1. CQV for Facilities, HVAC, and Equipment
2. CQV for Cleaning Validation

Responsibilities:

• Develop risk assessments, system impact assessments, protocols, and reports to support qualification and validation requirements, in line with regulatory standards and industry best practices.
• Create validation protocols using a science and risk-based approach to ensure compliance with regulatory requirements.
• Review, analyze, interpret, and summarize system and process performance data from executed activities for reporting and presentations to management.
• Investigate deviations, prepare detailed investigation reports, and create summary reports to ensure clear documentation of issues and their resolutions.
• Apply good judgment within defined practices and policies to select appropriate methods and techniques for obtaining solutions.
• Author or support the creation of test scripts for commissioning and qualification (CQ) of facilities, HVAC systems, manufacturing or analytical equipment.
• Conduct cleaning validation studies to ensure processes meet stringent regulatory requirements.
• Author or execute test scripts for DeltaV batch recipe testing, ensuring seamless integration with production processes.
• Draft DeltaV batch recipes, ensuring alignment with manufacturing specifications and process requirements.

Requirements:

• Experience with pharmaceutical and biopharmaceutical processes, including commissioning, qualification, and validation.
• Knowledge of DeltaV batch processes and recipe creation/testing is highly desirable.
• Proven expertise in facilities, HVAC, equipment, or cleaning validation is required for the respective roles.
• Strong analytical and problem-solving skills with a good understanding of industry regulations and standards.
• Experience with risk-based validation approaches and developing protocols in compliance with regulatory requirements.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

· Ensure thorough understanding of project terms and requirements.

· Review detailed drawings, and provide technical advice on practical design and construction.

· Prepare, schedule, coordinate and monitor the assigned projects.

· Prepare, update and maintain document summary or the necessary documents for projects.

· Prepare and submit the required engineering reports, documents, and drawings to the relevant authorities for approval.

· Update, manage and compile schedules of assigned projects with accurate data and report to the manager.

· Interact with clients to interpret their needs and requirements.

· Cooperate and communicate effectively with the project participants to provide assistance and support, to meet delivery timeline, optimize cost efficiency and meet customer specification.

· Feedback on workflow issues to manager in order to enhance efficiency and productivity.

· Manage all expected / unexpected change orders or deviations during project execution.

· Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

· Any other job as assigned by the Management from time to time.

Job Description:

• Collaborate with project managers, clients, and development teams to understand user needs, business goals, and design requirements.
• Create user flows, wireframes, prototypes, and high-fidelity designs for websites, mobile apps, and posters.
• Present design concepts to internal teams, stakeholders, and management.
• Identify user pain points and propose research initiatives, including usability testing, surveys, and interviews, to inform design decisions.
• Work closely with cross-functional teams to ensure designs meet business objectives and user needs.
• Ensure designs align with the design system and brand guidelines.
• Collaborate with frontend developers to ensure accurate implementation and participate in front-end development (training provided).

Requirements:

• Portfolio demonstrating visual design, user-centered thinking, research, and analytical skills.
• Proficiency in design tools like Figma or similar. Experience in requirement gathering through workshops, interviews, and research.
• Knowledge of user research methodologies and conducting user testing. Ability to communicate ideas through storytelling, storyboards, mood boards, flowcharts, and presentations.
• Strong verbal, written, and visual communication skills.
• Detail-oriented and ensures designs align with design systems.
• Ability to manage multiple projects in a fast-paced environment.
• Business acumen and understanding of objectives.
• Familiarity with Agile/Scrum, project management, and front-end development is a plus.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Key Responsibilities

• Conduct regular inspections and maintenance of lifeboats, davits, and related safety systems in accordance with SOLAS and IMO standards.
  Perform load testing, release gear inspections, and condition assessments.
  
• Diagnose and repair faults in mechanical, hydraulic, and electrical systems.
  Ensure all repairs meet quality standards and comply with regulatory requirements.
  
• Prepare inspection and maintenance reports for submission to classification societies or flag authorities.
  Maintain accurate records of completed work, including parts and labor used.
  
• Provide technical support and advice to clients regarding lifeboat safety and equipment compliance.
  Offer guidance on preventative maintenance programs.
  
• Stay updated with international maritime safety regulations and standards.
  Ensure work is performed in a safe manner, following company and industry safety protocols.
  

Qualifications

• Diploma or degree in Marine Engineering, Mechanical Engineering, or a related field.
• Certification in lifeboat inspection and servicing (e.g., SOLAS or manufacturer-specific training).
• Proven experience in lifeboat maintenance, repair, and servicing (3+ years preferred).
• Strong knowledge of maritime safety regulations, including SOLAS, IMO, and LSA Code requirements.
• Hands-on experience with hydraulic, electrical, and mechanical systems.

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Our client is a leading logistics company. They are looking for a Software Engineer to assist their IT team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Software Engineer is responsible for:

Duties

• Assist in all SDLC phases, including design, development, testing, maintenance, and support.
• Contribute to Agile processes and apply DevOps practices.
• Provide user training for effective system utilization.
• Analyze business processes to improve system efficiency and alignment with organizational goals.
• Collect and document system requirements, ensuring accuracy and data integrity.
• Customize ERP system, develop reports, and troubleshoot issues with cross-functional teams.

Requirements

• Bachelor's degree in Information Technology/ Computer Science or related field
• Min 3 years of experience in full stack software development, including 3 cycles of implementation
• Proven expertise in ERP system support, analysis and customization
• Strong troubleshooting skills and proficiency in SQL and database management
• Proficiency in specific ERP development tools and frameworks (e.g., BAQS, Dashboards, BPMs, UD fields)
• Experienced in developing application using .NET Framework, C# will be preferred
• Experience with Epicor, Navision and Microsoft development technologies like C/AL, Dynamics NAV/ Business Central, .NET and Azure will be advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Job Summary

We are seeking an MES Syncade Automation Engineer to join our on-site, multi-disciplinary team. This role plays a critical part in the design, testing, and troubleshooting of recipes in Syncade, ensuring seamless compliance with regulatory standards throughout the project lifecycle up to production handover.

Key Responsibilities

• Collaborate with project teams to support and align with product and production-specific requirements.
• Design, test, and modify recipes under change control during design, start-up, qualification, and production stages.
• Ensure compliance with cGMP by documenting electronic batch records (eBR), standard operating procedures (SOP), and operational reports.
• Identify and implement process improvements while adhering to safety, hygiene, environmental, and quality regulations within your area of responsibility.

Job Requirements

Essential Skills

• Extensive experience with Emerson Syncade and DeltaV.
• Proficiency in Recipe Authoring and Troubleshooting within Syncade; experience with other MES platforms is a plus.
• Strong experience in Bioprocess Automation.
• Solid understanding of GMP regulations.
• Good experience in Commissioning and Qualification.

Nice to Have Skills

• Experience working in the Life Sciences Industry.

Qualifications

• Master’s or Bachelor’s degree in a relevant engineering discipline.
• Proven expertise in structured and well-organized work practices with a focus on innovative solutions.
• Strong interpersonal and team collaboration skills.
• In-depth understanding of IT and process control systems, with a sharp eye for operational optimization opportunities.
• Effective communication skills at all organizational levels, both internally and externally.
• Demonstrated ability to take ownership of systems and work responsibly.

Job Description:

- Overseeing project progress and provide regular updates to management.

- Processes monthly progress claim for submission.

- Attending On-Site meetings whenever required.

- Thorough understanding of relevant industry, products, equipment and services provided to client.

- Develop long-term relationships with clients, through managing and interpreting their requirements.

- Sales of our products & facility management services

- Other duties as assigned

Job Requirements:

- Candidates with a locally recognized diploma or bachelor's degree in Engineering (Mechanical/Electrical) are highly welcome.

- Able to read and write in proficient English

- Prior experience in the construction related field is highly preferred

Job Description

• Industry/ Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Validation Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $6,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist Quality and Validation Manager Asia to complete the tasks on time with good quality.
• Responsible for the successful execution of the Validation functions for customer projects, as required – Quality, Cost, and Time.
• Responsible for driving and supporting the project team for projects where validation is required and ensuring execution complies with company's standards.
• Provide training on qualification activities.
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 2 years of working experience in quality or validation of automated systems (mechanical, software, hardware) or equivalent
• Prior work experience in control systems design is advantageous
• Excellent understanding of assembly, test & debug procedures

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Brilliant Engineering Pte Ltd

Office at LINK@ AMK

Service Engineers - 1 post

S$2600 to 3000 / month

Preferably with 3 to 5 years of relevant experience.

Job description

Overview

Brilliant Engineering Pte Ltd is a diversified engineering company specialise in providing MEP System Maintenance Services such as Air Conditioning, Electrical, Fire Protection & Plumbing system. Our list of Clientele ranges from Tourist Attractions, High Class Hotels, Retail shopping malls, Corporate MNC and Technology Companies and F&B restaurant.

Are you a dynamic, enthusiastic, and driven engineer looking to make a significant impact? Our company is seeking an energetic Assistant Service Engineer to join our team. In this role, you will be responsible for managing and engagement with a list diversified clients to carry out maintenance or A&A project work to the Engineering System.

Key Responsibilities:

- Key Point of Contact for the assigned clients.

- Ensure M&E Equipment are well maintain to minimize downtime due to breakdowns.

- Preparation of Quotation for Repair & Project work

- Collaborate with team members to brainstorm, plan, and execute engineering projects.

- Utilize your technical expertise to solve complex problems and drive innovative solutions.

- Actively participate in all stages of M&E Project

- Demonstrate a proactive approach to learning and staying updated on industry trends and advancements.

- Effectively communicate with stakeholders to gather requirements, provide updates, and address concerns.

- Foster a positive and collaborative work environment by sharing knowledge and supporting team members.

- Provide Supervision to a Technicians and Supervisors, ensuring the high standard of deliveries in terms of service standard, best engineering practice and Safety

- Provide Supervision to the Engineering team to ensure they conform to BEPL’s standard in terms of Servicing, Repair and Project Works

- Management of Sub-Contractors in repair, new projects and new installation (if necessary)

Qualification

- Diploma in any Engineering discipline or related field.

- 3 to 5 years of experience in Facilities/Building Services or any relevant Mechanical & Electrical related field.

- Strong problem-solving skills and attention to detail.

- Excellent communication and interpersonal skills.

- Ability to thrive in a fast-paced, dynamic environment.

Technical Knowledge

- Will require the candidate to have Basic Technical Knowledge in the Mechanical and Electrical field, namely Air-Conditioning and Electrical Systems.

- Preferably with 1 to 2-years of relevant technical field application.

- Please submit your CV with current salary, expected salary and earliest join date. We do not consider if there is no salary details indicated in your CV.