The College of Computing & Data Science (CCDS) invites applications for the position of Research Fellow. The Research Fellow responsible for performing intelligent visual signal processing/compression/computing.

Submission of a comprehensive reports/IDs/Demos/papers summarizing/justifying the pioneer and innovative research performed

Key Responsibilities:

• To perform the pioneer research in exploring visual signal representation towards machine uses.
• To perform systematic investigation into the characteristics of visual signal representation for machine uses, to meet the emerging requirements for AI.
• To devise a new scheme for visual signal representation with deep-learnt visual features, toward machine uses.
• To investigate feature-level just-noticeable difference modelling for machines to facilitate assessment and optimization.
• To formulate a comprehensive visual feature codec for machine uses.
• To set up and analyze experiments and datasets under different conditions.
• To propose a methodology/framework in a software prototype to be developed in the project.
• To report research findings in a form of reports/papers and present in international peer-reviewed conferences and journals.
• To be involved in the mentoring of PhD/Masters/FYP students

Job Requirements:

• Possess a PhD degree in Computer Science (And Engineering), Electronic Engineering, Applied Mathematics, Perception Sciences, etc.
• Have good technical reading, writing and programming skills.
• Have good experience and track record for related R&D.
• High desire for technological exploration and achievement.
• Background knowledge in signal representation/processing, visual data compression, and data-driven and machine learning/analysis.
• Prior research experience and track record in R&D and standardization.
• Prior experience in state-of-the-art AI techniques.
• Mastering of a programming language would be valued (e.g. Python, C, Matlab, …)
• Self-driven, highly motivated, with interest to work with other researchers and scientists (as a team player) to produce high-quality research.

We regret that only shortlisted candidates will be notified.

Role & Responsibilty

• Responsible for quantity take-offs and Cost Control functions for projects.
• Subcontracts management.
• Supervisor and Plan for Daily work schedule and progress for requirement for targeted completion.
• Tracking of Subcontractors/ Suppliers obligations required as per agreement.
• Administering variations to subcontractors and suppliers.
• Preparation of progress certificates for subcontractors and suppliers.
• Assist in the preparation of the monthly cost reporting and forecasting.
• Identification and pricing of variations to the Contract.
• Assist in preparation of monthly commercial report.
• Maintaining registers of variations, extension of time claims.
• Liaising effectively with other Technician, engineers and supervisors to ensure all relevant information in relation to variations. and extension of time claims is captured.
• Any other duties as may be required by the Company.

Requirement

• Diploma / Degree
• Minimum 2 to 5 years experience as a Engineer
• Passionate about Project values of safety & care, being honesty & integrity, customer focus, working together and performance excellence.

Job Responsibilities:

• Provide service and support for security solution deployed at customers’ premises
• Understand the mechanics of equipment in the security solution.
• Know the functionality of each equipment deployed to the security system.
• Provide hands on preventive maintenance service on equipment deployed.
• Provide and maintain good customer support.
• Ensure backup information in the security system.
• Respond to fault calls promptly
• Attend to troubleshooting and repairs of equipment.
• Ensure timely and smooth progress of works.
• Ensure good quality of work and abide to safety & environmental regulations.
• Perform other official company duties as may be directed

Job Descriptions:

• Project coordination and carry out analysis and design of civil,structural, bridge and geotechnical engineering discipline.
• Familiar with design softwares eg. Civil 3D, Inrails, Inroads, Plaxis 2D/3D, Staad pro, SAP, Robot, Geostudio etc.
• Management of construction contracts.
• Planning site investigations, review field/laboratory test data and prepare civil,stuructural and geotechnical interpretative reports.
• Planning instrumentation, monitoring and review/analyse instrumentation data.
• Preparation of tender specifications,documents, design reports, making submissions to appropriate authorities and attending project meetings.

Job Requirements:

• Recognised Degree in Civil/Structural and/or Geotechnical Engineering Degree.
• Minimum 5 years' relevant experience and foundation engineering design for geotechnical, buildings and underground structures. Fresh graduate with recognised degree is welcome.
• Working experience in the infrastructure sector.
• Must be fully conversant with BCA regulations; able to maintain systematically site records, contracts, documents and meet BCA reporting requirements. Fully conversant with Eurocode and appropriate Singapore Standards.
• Committed, meticulous and a good team player.
• Singaporean/SPR only.

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Responsibilities:

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Involved in preparing relevant QA/QC reports
• INvolved in implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to building handover to owners.
• Attend to client ’s defects during Defect Liability Period.
• Assisting in handover of the common areas to management team.

Job Requirements:

• Min Diploma or Degree related to QA/QC or Engineering / Construction related field
• Prior experience related to construction industry (HDB, Condominium projects etc.) is added advantage
• Good knowledge of construction quality control/assurance is necessary

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

· Project planning and management.

· Ensure timely completion of projects and execute project tasks within the agreed timescales and budget.

· Responsible for site supervision, safety, resource planning, coordination works and testing & commissioning.

· Plan, coordinate and monitor orders and deliveries.

· Work with sales team to ensure design plan and output meet customers’ requirements.

· Ability to handle combination of projects concurrently at times with respective project technical leads on-site.

· Liaise with customer, vendors, M&E consultants, and project team to ensure quality control, customer satisfaction and projects are completed on time.

· Initiate, implement, and document new processes/ procedures to improve quality, cost, and productivity of the project.

· Liaise with M&E consultants and vendor.

· Adhere to ISO procedures and standards.

· Handle ad hoc assignments or tasks as required.

Requirement

• Bachelor’s degree in project management, business management, or related area of study.
• 5-7 years of experience as a Project Manager or similar position responsible for defining and managing project scope, timelines, profitability, and effective delivery of products or services.
• Experience in managing delivery of customer-facing and internally facing products or services.
• PMI or PMP certification or similar from an accredited organization.
• Intermediate to advanced proficiency with industry-standard word processing, spreadsheet, and presentation software programs.

Responsibilities:

· Deliver top-notched technical solutions to clients and take responsibility for the standards of work with client centric mindset.

· Take responsibility for a portion of an installation, break/fix incidents, and problem management.

· Learn to utilize automated mediums to perform staging, pre-loading configurations, and onsite deployment, ultimately enhancing proficiency in automation.

· Work together and collaborate with the Implementation Engineering team to fulfil client requirements

· Attend less complex configurations, installations, and break/fix events.

· Analyse security-related information and events, escalation of incidents for validation and remediation

· Flexible working hours may include occasional overtime or shifts outside of traditional business hours

· Design and implement firewall solutions such as Palo, Checkpoint, Fortinet or Cisco.

Requirements:

· Bachelor’s Degree, preferably in Computer Science, Information Technology or related field

· At least than 3 years of working experience

· Strong in interpersonal skills

· Has excellent verbal/written communication and presentation skills

· Ability to prioritize work independently and work under pressure to meet deadlines

· Team player, resourcefulness, strong analytical skills is an advantage

· Knowledge in the following area may be advantageous:

· Basic cybersecurity design and principles and Routing or Switching technology

· TCP/IP or Firewall, Intrusion prevention concepts

· Project management methodologies

• Managing the day-to-day planning and engineering initiatives for the project
• Responsible for project functions; e.g. Site Management, Project Control Management, Engineering Management, Procurement, Construction Management, etc.
• Supervise and prepare methods for the project and any installation procedures, task plans and guidance
• Monitor site progress against budget and forecast schedule
• Ensure EHS and QA/QC standards of works by trade cons are met
• Ensure accurate and timely reporting of works progress to Senior Manager
• Identify and notify Senior Manager and Executive Manager (PMO) of any additional works or changes that constitute a variation
• Always ensure coordination and communication with all trade cons
• Prepare meeting minutes for project meeting
• Manage project closeout and obtain all warranties for final acceptance
• Support tender processes

Associate System Engineer / System Engineer | 2yrs | 5 Days | East

5 days, 8.30am- 5.50pm

Salary: $2800- $3000 (AE), $3500 (System engineer) + Allowance

Location: East, and clients site whenever required

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Engineer/Senior engineer (Fire protection)

Job Description

Duties & Responsibilities:

• Supervise subcontractors based on shop drawings and method statements.
• Collaborate with authorities and clients on materials and samples.
• Review fire protection design drawings for compliance (e.g., Sprinkler, Fire Alarm).
• Identify discrepancies in M&E, structural, and architectural provisions.
• Manage project execution and attend contractor meetings.
• Review compliance of drawings and allocate tasks to supervisors.
• Plan and lead testing of fire protection systems.
• Coordinate site inspections and rectify defects.
• Prepare manuals and as-built drawings for client handover.

Education / Experience / Skills:

• Degree or Diploma in Mechanical Engineering/Building Services.
• Minimum 5 years of relevant experience.
• Proficient in MS Office with strong communication skills.
• Experience with Water Mist or Foam systems is a plus.

Responsibilities:

• Electrical and Mechanical Design for IoT sensor systems.
• Provide technical support and design for site installation of IoT systems.
• Support Project Manager in technical reviews and discussions with customers, subcontractors, and suppliers.
• Manage work plan and budget.
• Prepare project documents and reports for submission.
• Ensure cost-effective execution of deliverables in accordance with contract specifications, schedule, and safety requirements.
• Manage site installation and commissioning works.

Requirements:

• Diploma in Electrical / Mechanical Engineering or equivalent.
• 3-5 years’ experience in engineering projects.
• Experience in System Integration, Automation, Electrical or Mechanical environments will be preferred.
• Candidates with experience in working with water supply and distribution systems will have an advantage.
• Able to multi-task and work under tight schedules.
• Strong project and people management skills.
• Excellent command of both written and spoken English.

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

Element has an opportunity for an Technical Engineer to join our rapidly expanding team. In this role, you will manage the technical implementation of the Element quality management systems within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Training Program Development: (a) Design and implement standardised training programs for laboratory staff across all required locations, covering equipment operation, test procedures, and safety protocols. (b) Develop training materials, including manuals, presentations, and hands-on demonstrations.
2. Staff Competency Assessment: (a) Assess staff competency regularly through practical evaluations, written tests, and observation of lab practices. (b) Identify skill gaps and recommend tailored training sessions to address deficiencies.
3. Standardisation Across Locations: (a) Ensure consistent training and skill levels across all laboratories by implementing standardised processes and protocols. (b) Conduct audits to verify adherence to training standards and laboratory procedures.
4. Onboarding and Certification: (a) Train and certify new employees in laboratory operations, testing standards, and quality requirements. (b) Maintain records of staff certifications and ensure timely renewals.
5. Technical Support and Guidance: (a) Act as a resource for troubleshooting technical issues during testing procedures. (b) Provide ongoing support to ensure proper equipment usage and methodology adherence.
6. Regulatory Compliance: (a) Ensure all training programs comply with relevant industry standards (e.g., ISO/IEC 17025) and regulatory requirements. (b) Stay updated on changes in industry regulations and incorporate them into training content.
7. Multi-location Coordination: (a) Schedule and conduct training sessions at multiple sites, ensuring all teams receive consistent updates and refreshers. (b) Coordinate with laboratory managers to align training priorities with operational needs.
8. Training Evaluation and Feedback: (a) Evaluate the effectiveness of training programs through feedback, performance reviews, and testing outcomes. (b) Continuously improve training content and delivery methods based on feedback and evolving laboratory practices.
9. Documentation and Reporting: (a) Maintain comprehensive records of training activities, participant progress, and competency assessments. (b) Report training outcomes and compliance metrics to management regularly.
10. Cross-functional Collaboration: (a) Work closely with the Quality team and Operations teams to ensure training aligns with organisational goals. (b) Share knowledge of best practices across sites to drive continuous improvement.
11. Promoting Safety and Quality Culture: (a) Train staff on workplace safety practices, hazard identification, and emergency response procedures. (b) Reinforce the importance of quality control and accurate testing in daily operations.
12. Equipment and Technology Training: (a) Provide training on the use, calibration, and maintenance of laboratory equipment. (b) Introduce staff to new technologies or testing methods as they are adopted.
13. Benchmarking and Continuous Improvement: (a) Monitor industry trends and benchmarks to incorporate innovative practices into training programs. (b) Encourage staff participation in external workshops, certifications, and seminars to enhance their expertise.
14. Performance Metrics Development: (a) Define key performance indicators (KPIs) to measure the impact of training programs on laboratory efficiency, accuracy, and compliance.

Job Requirements:

• Preferred Civil Engineering Diploma or Bachelor of Civil Engineering Bachelor’s degree (or equivalent qualification) with ideally 5 years’ experience in construction materials testing.
• Experience of working in an ISO / IEC 17025 environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Excellent communication skills.
• Experience in participating in quality investigations, undertaking root cause analysis, developing corrective action plans, and ensuring the effectiveness of actions undertaken
• Requirement to keep up to date with changes in the quality landscape and maintain personal professional development.
• Ability to identify quality and technical problems and work with colleagues to determine effective and sustainable solutions.
• Ability to collaborate with colleagues and work effectively as part of a team

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN AUTOMATION ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

Roles & Responsibilities:

· Report to Project Manager.

· Assist Project Manager to ensure that site activities are executed in accordance with job specifications, within budget and time schedules.

· Prepare Material Take offs, design calculation, project scheduling, equipment proposal, technical submission and drawing.

· Tracking and updating status of submitted documents.

· Coordinate, monitor & execute site activities.

· Prepare Progress Reports and Claims.

· Prepare Method Statement, Risk Assessments, Safe work procedure for various installation works.

· Maintain ISO documentation & records.

· Procurement, receiving & checking of items/equipment/services.

· Oversees equipment installation works, resolving problems and upholding safety management.

· Strict compliance with company and authorities’ practices, policies, rules and regulations.

· Liaise with clients/sub-contractors/project team, for their needs and requirements.

· Attend all site / progress meetings.

· Any ad-hoc duties assigned.

Requirements

· Diploma or Degree in Mechanical Engineering/Electrical Engineering/Environmental/Equivalent

· Singaporean/PR/EP/S-Pass

· AutoCAD proficiency

· 5 days work week