Service Engineer (Semiconductor)

5 days, 9am- 6pm, may need to support short term night work

Salary: $2700- $3800

Address: Woodlands

Job scope:

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing
• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works
• Serves as company contact point with customer on technical matters
• Attends to customers complaints and provides timely solutions
• Other ad hoc duties

Requirements:

• Diploma/ Degree in Mechanical/ Mechatronic Engineering or related discipline
• Experience in semiconductor industry is required
• Prior experience in cleanroom fabrication is a must

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Job Description:

• Perform global structural analysis with all major connection detail ULS/ALS.
• Perform global fatigue analysis with all major connection detail FLS.
• Perform complete structural analysis reports for all main structure foundation, support, lifting, sea fastening, load out, dry & wet tow up to classification society approval level.
• Able to perform steel beam design such as ULS bending, shear, bucking verification and SLS deflection verification using the beam section properties.
• Perform mesh load transfer for structural analysis.
• Perform structural design specification.
• Perform main scantling and steel weight calculation.
• Perform structural construction standard in detail engineering.
• Perform Collision analysis.
• Design and perform all kind of major structural connection detail and analysis.
• Coordinate with classification societies for design and analysis approvals.
• Design and drafting of all structural drawings such as hull lines plan, structural category plan, deck loading plan, full penetration welding plan, scantling drawings, major connection scantlings etc. (Optional)

Requirements:

• Academic qualification in Marine/Ocean Engineering or Civil Engineering
• Minimum 8 years of relevant working experience in the whole process of concept/basic design/detail engineering of semi-submersible substructure/floater design in Floating Offshore Wind Turbine (FOWT) or offshore rig industry.
• Proficient in software packages in SESAM Genie, SACS, Python and AutoCAD
• Good knowledge of all regulations such as DNV, ABS, BV, IEC etc.

We are seeking a motivated and customer-focused Service Engineer to join our team. In this role, you will be responsible for maintaining and servicing security systems in alignment with industry standards, ensuring optimal system performance, minimal downtime, and exceptional customer satisfaction.

• Permanent Position : Service Engineer
• Salary : Attractive Remuneration + Transport Allowance + Mobile reimbursement + Service Bonus
• Location : Kallang
• Working Hours : Office Hours

Key Responsibilities:

• Collaborate with customer service representatives to promptly resolve customers' security system issues.
• Provide comprehensive support and maintenance services, including preventive maintenance, troubleshooting, system upgrades, expansions, alterations, and training.
• Build and maintain long-term relationships with customers to ensure satisfaction.
• Renew and manage maintenance contracts as needed.
• Deliver high-quality service by adhering to industry standards and ensuring prompt responses to service requests within the region.
• Troubleshoot and resolve technical issues, providing follow-up until resolution.
• Oversee service issues transitioned from the project team after external handovers.

Requirements:

• Diploma or higherqualification in Electronic, Computer, Automation, or Mechanical Engineering.
• Experience in the security industry with knowledge of access control, video surveillance, and alarm systems is an advantage.
• Proficiency in IT hardware, networks, and database systems.
• Strong analytical and problem-solving skills, with the ability to work under pressure.
• Self-motivated, independent, and eager to learn.
• Excellent communication and interpersonal skills with a customer-oriented mindset.

Next Step:

• Interested applicants may email your resume to [email protected] with your latest updated resume
• Only shortlisted candidates will be contacted

EA License No. – 23C2060 |EA Registration No. - R2092390

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Job Description

• Industry/ Organization Type: Manufacturing/ Supply Chain
• Position Title: Facility Engineer
• Working Location: Tuas
• Working Hours: 5 days (Monday - Friday, 8 AM - 5 PM)
• Salary Package: Basic Salary + Transport Allowance ($750) + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintenance of building, facilities, and security at all Company’s sites.
• Coordinate and execute, when necessary, inspection, testing, general maintenance, and repair of the critical site systems and equipment.
• Ensure that all equipment and other facilities are working properly.
• Critical systems and equipment include power/ UPS, backup generator, and fuel supply. HVAC (Heating, Ventilation, Air Conditioning), plumbing/ water supply, security doors/ alarms/ cameras, Fire safety systems and equipment.
• Provide situation/ status updates to the Facility Manager on issues which are to be resolved and the critical system or equipment is fully operational.
• Initiate interventions to solve problems in the facilities and develop a system for cleaning, repair and maintenance of facilities.
• Deliver timely and efficient solutions to facility-related requests.
• Liaise with contractors on maintenance/ repair.
• Supervise contractor on-site.
• Review the risk assessment submitted by the contractor prior to the commencement of work.
• Ensure required safety requirements are in place prior to the commencement of work.

APPLY NOW!!!

• Diploma in Engineering or equivalent
• At least 2 years of work experience in Facility Management
• Possess own transport is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #65726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities

• Understand and analyse the customer’s needs;
• Find the best solution and lead the architecture definition to meet the customer requirements;
• Interface with the customer, for the technical related aspects of the solution;
• Support the sales and marketing teams by providing internal and external technical pre-sales support for the solutions and services, taking the lead of the architecture aspects in strong cooperation with all the required technical and non-technical skills involved (e.g. hardware, software, security, quality, maintenance);
• Lead the Make/Team/Buy decision process and support the partner & subcontractor choice throughout the capture & delivery activities;
• Be in charge of the executive and technical documentation for tenders and support handover to projects (including but not limited to design documentation);
• Any other ad hoc duties as assigned by supervisor.

Qualifications

· Bachelor's degree in Computer Science, Cybersecurity, or a related field.

· Experience with Thales HSM or similar cryptographic solutions.

· Strong understanding of cryptographic algorithms and protocols.

· Familiarity with compliance standards (e.g., PCI-DSS, GDPR).

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Responsibilities:
· Designing and detailing of Civil & Structural engineering works;
· Co-ordinating with clients’ representatives, Project Managers and Consultants Team from inception to completion of projects;
· Providing periodical site inspection and attending meetings during course of construction of projects; and
· Responsible for timely submission of reports and completion of projects for tender/submission with target dates.

Requirements:
· A recognised Degree in Civil/Structural Engineering by PEB;
· Minimum 1 - 2 years experience in a similar capacity;
· Procient in Civil and Structural Engineering software applications;
· Those with design experience will be an advantage;
· Positive attitude, self motivate and responsible;
. Fresh graduates are encouraged to apply.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Participate in the development and management of the Project Work Schedule, covering building works, M&E, and Process Systems, from concept design through construction/installation to testing and commissioning.
• Estimate the duration and resource requirements for key construction activities.
• Prepare technical documentation for tender submissions.
• Contribute to site planning, work scheduling, and monitoring of site implementation progress.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 4 years of experience in planning construction projects for building facilities.
• Good knowledge using Primavera.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Engineer (Private Residential Condominium Projects)

Visit www.ppsjob.com.sg

Job Description & Requirements

• Preparing and manage overall master schedule integrating work breakdown structure
• Preparing schedule bar chart plan considering all in puts (manpower, equipment and materials) availability, production and construction sequences
• Developing and update resources (manpower, equipment's and materials) availability, production and construction sequences
• Inspect and monitor daily the work happening on site
• Participate all meeting (ie. Schedule review meeting, progress meeting, coordination meeting, constructability review meeting and so on)
• Record / Document weekly progress meeting held with the client, consultants and sub-contractors
• Liaising with managers and engineers to discuss the progress of the project and address any issues that arise
• Developing contract and construction programmes and construction project plans

Requirements:

• Degree in Civil Engineering and/or relevant field
• Minimum 3 years’ of local experience in private residential and condominium projects
• Well-versed in sequence of works and authority requirement
• Proficient in planning works and material schedules
• Familiar with Ms Project is preferred

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage?

Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve.

Join us.

Team Introduction

Video-On-Demand (VOD) is a world-leading video platform that provides multi-media storage, delivery, transcoding, and streaming services. We are building the next-generation video processing platform and the largest live-streaming network, which provides excellent experiences for billions of users around the world. Popular video products of TikTok and its affiliates are all empowered by our cutting-edge cloud technologies. Working in this team, you will have the opportunity to tackle the challenges of large-scale networks all over the world, while leveraging your expertise in coding, algorithms, complexity analysis, and large-scale system design.

What you will be doing:

- Architect and develop efficient, highly scalable, and secure services that power all the video products within the organisation;

- Design, implement and operate our critical and scalable services, including video delivery services, upload services, and core persistence layer;

- Develop advanced intelligent video QoS data platform, and help client developers make decisions to optimise the user experience of our products;

- Design, build and maintain a global scale, multi-regional video infrastructure system.

Qualifications

Minimum Qualifications:

- Bachelor's degree in Computer Science or a related technical background involving software/system engineering, or equivalent working experience.

- Good programming experience with at least one of the following languages: Go, Java, Python or C++.

Preferred Qualifications:

- Experience with CDN, Multimedia or Live Streaming.

- Familiar with Unix/Linux operating systems.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Installation, support and troubleshooting of software, hardware, and peripheral device
• Monitoring. Troubleshoot. Windows Laptop/Printer
• Responsible for troubleshooting in Operating system Managing and updating Windows patches for Desktops and Laptops.
• Desktop Support through remote access Coordination with clients and customer regarding their problems
• Any other ad-hoc duties assigned / required

Engineer (Private Residential Condominium Projects)

Visit www.ppsjob.com.sg

Job Description & Requirements

• Preparing and manage overall master schedule integrating work breakdown structure
• Preparing schedule bar chart plan considering all in puts (manpower, equipment and materials) availability, production and construction sequences
• Developing and update resources (manpower, equipment's and materials) availability, production and construction sequences
• Inspect and monitor daily the work happening on site
• Participate all meeting (ie. Schedule review meeting, progress meeting, coordination meeting, constructability review meeting and so on)
• Record / Document weekly progress meeting held with the client, consultants and sub-contractors
• Liaising with managers and engineers to discuss the progress of the project and address any issues that arise
• Developing contract and construction programmes and construction project plans

Requirements:

• Degree in Civil Engineering and/or relevant field
• Minimum 3 years’ of local experience in private residential and condominium projects
• Well-versed in sequence of works and authority requirement
• Proficient in planning works and material schedules
• Familiar with Ms Project is preferred

Responsibilities:

• Assist the Project Manager in monitoring and managing the day-to-day operations of projects
• Liaise with consultants, sub-contractors and supervisors on project matters
• Attend meetings with clients/main contractors/sub-contranctors on project-related matters
• Update site progress information and ensure the accuracy of shop drawings
• Carry out inspection and joint inspection of works in progress
• Ensure that the works are executed to the required quality standard
• Adhere to regulatory requirements, safety guidelines and practices in the work place
• Ability to produce constructible 3D drawings and be able to translate them into 2D shop drawings, will be an advantage
• Assist the Project Managers and project team with other tasks

Requirements:

• At least 2 years of experience working as a Project Engineer.
• At least 2 years of experience with Laboratory/Specialty gases pipeline systems
• Good understanding of M&E works and ability to associate BIM with construction needs
• Willingness to learn and use new software/technology
• Self-driven and good time management
• While not necessary, knowledge of AutoCAD, Revit MEP, Navisworks and BIM360 would be an advantage.

Our Client:

Our client is a well-established Japanese Research company. They are currently looking for an AVP, Network Engineer, Planning & Governance to join their growing team in Singapore.

The Responsibilities:

• In-depth knowledge of network protocols, risk management, security standards, and regulatory compliance
• Analyse network traffic patterns, bottlenecks and track performance to identify issues proactively and provide recommendations for network optimization when required
• Active participation during network audits and collaboration with relevant stakeholders
• Ensure APAC network compliant with bank rules and regulatory guidelines
• Establish and enforce network operational and procedures manuals
• Supervise Network Operations team, review KPI and ensure SLA
• Manage vendors and service providers including MSA, SA, services level to ensure service reliability and cost efficiency
• Coordinate with cross-functional teams for network planning and service-related matters. e.g.: DR Drills, Third party risk mgmt., Asset mgmt., Lifecycle mgmt., Privilege Access mgmt., Patch mgmt. etc.
• Oversee the design and architecture of the network to ensure scalability, reliability, and security
• Good understanding of network budget planning related to Capex and Opex
• Develop and maintain network performance reports for management review

The Requirements:

• Bachelor’s degree in computer science, Information Technology with min. 5 years of experience in Network Operations
• Prior working experience as an IT professional in banking or financial institution is an advantage
• Min. 8-10 years of experience in network planning, design and Implementation.
• CCNP/CCDP, ITIL or equivalent are required; CCIE is desirable
• Hands on experience in Network deployment for large enterprise and Datacenter networks.
• In-depth knowledge of IP routing, Switching, BGP, OSPF, SD-WAN, QOS and VPC
• Proficient with Cisco, Fortinet, Checkpoint, F5 or equivalent
• In-depth knowledge of IP routing, Switching, BGP, OSPF, SD-WAN, QOS and VPC.
• Excellent written and verbal communication skills, capable of presenting to technical and non-technical audience

RGF Privacy Policy – https://www.singapore.rgf-professional.com/privacy-policy

Disclaimer: The Company complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of their age, race, religion, nationality, marital status, or family responsibilities. A more detailed discussion of the TGFEP is available on the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP) website at https://www.tal.sg/tafep.

JO Reference: 114810

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Sales Engineer

Location: Woodlands Horizon

Working Days: Mon - Fri, 5 days

Working Hours: 9am – 6.00pm

Salary: $2,400 + Comms

Responsibilities & Duties :

• Service knowledge including pricing, cost and profitability, market acceptance, channel, and competitive dynamics.
• Offer technical support and expertise advice to customers
• Increase sales primarily through direct contact or/and new/existing channel partners.
• Regularly monitors and reports on Key Performance Indicators (KPIs).
• Other duties may be assigned.

Professional Qualifications

• Diploma mechanical/Chemical Engineering with field experience is preferred.
• 1 to 3years relevant experience in handling sales
• Proficient with Microsoft Office & One Drive.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Field Application Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Field Application Engineer:

• Provide technical support to customers and contractors, addressing product and application-related queries.
• Perform on-site measurements and system evaluations to identify opportunities for improvement and optimization.
• Conduct technical training sessions for stakeholders.
• Assist in product quality control through thorough testing and analysis.
• Handle additional assignments as required, showcasing flexibility and adaptability.

Requirements:

• Diploma or Degree in Engineering Discipline or similar field
• Relevent experience
• Experience with Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

• West Side Project
• Very good Main Contractor from Australia
• Candidates with short notice period will be highly preferred

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Responsibilities:

• Oversee wafer manufacturing to meet quality, yield, and production targets.
• Collaborate globally on process alignment and qualification of new processes, suppliers, and consumables.
• Work with cross-functional teams to enhance process capability and yield.
• Coordinate troubleshooting for process issues and yield losses.
• Drive continuous process improvements and resolve chronic quality issues.
• Develop best practices and innovative solutions for ongoing improvement.
• Conduct statistical data analysis for process improvement and data interpretation.
• Utilize problem-solving techniques (8D, Fishbone, DOE) and risk assessment tools (FMEA).

Requirements:

• Degree in Engineering or equivalent.
• Knowledge of quality management systems, data analysis, DOE, and SPC
• Proficient in statistical software (e.g., JMP).
• Experience with Visual Basic, databases, and queries (preferred).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The company is a leading American multi-national in the field of industrial automation as well as integrated control solutions. With more than 20,000 employees globally and presence in Singapore for more than 30 years; we have the following opening within the Power Supply team in Singapore.

Principal Engineer, Power Supply

Responsibilities

• You should be a technical lead in developing embedded power supply in our new generation of industrial automation products.

• You will play a key role in power supply development from concept, architecture, requirements definition, power budgeting, design/implementation of circuits, troubleshooting of designs, functional safety impact assessment, product verification and certification testing, and release to production.

• Lead, communicate and engage solutions with cross functional teams to find solutions.

• Ability to achieve targets while working on multiple projects simultaneously.

• Work with suppliers to discuss requirements, testing method, identification of issues and resolutions.

• Perform schematic design, modelling / simulation tool and equipment for power converter design and various techniques of protection.

• Involved throughout the hardware development process, including circuit simulation & design, component de-rating, hardware debug & release.

Requirements

• Master or Bachelor’s degree in electrical/power engineering with minimum 10 years of experience design and test of power supply circuits and printed circuit boards for hardware systems, with expertise in isolated and non-isolated power supply design.

• Experience developing electronic hardware systems that meet product certification requirements, such as UL, CE, or IEC 61010.

• Proven track records in AC-DC & DC-DC power design related activities and knowledge. In depth knowledge on power supply topologies, e.g. Sepic, buck, boost, flyback etc and different compensation techniques. Determine which of these topologies best suits the needs based on given product requirements.

• Strong in design calculations and simulation data for energy, thermal, power efficiency based on selected design concept.

• Different types of transformer design, specification, and materials.

• Working knowledge on the characteristics of magnetics (including inductor/transformer modelling), magnetization inductance, magnetization current, leakage inductance, intra-winding and inter-winding capacitance, self-resonant frequency, characteristics and limitations of magnetic cores, core saturation, core loss, high frequency losses, core reset, winding techniques for optimization of desired magnetics, and design of current transformers.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

About the Role

The Project Sales Engineer will act as liaison between the company project team and clients, providing information on planning, delivering, testing, commissioning, service and maintenance repair related knowledge from securing to closing of a project.

Job Description:

• Develop rapport with customers and advance the sales funnel from initial contact to sales.
• Establish good contact with developers, architects and MEP consultants.
• Thorough understanding of relevant industry, products, equipment and services provided to client

Job Requirements:

• Minimum Degree in Mechanical Engineering or equivalent
• Excellent interpersonal and customer service skills
• Strong knowledge in HVAC/ACMV
• Prior experience in the construction related field is highly preferred
• Proficient with Microsoft Office Suite, AutoCAD and project planning related software are required to prepare for proposal, reports and logs

Working Location:

• Ang Mo Kio

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer (JavaScript, TypeScript)

This is a one-year contract role

Internal Code: A25002

What will you do?

• We develop the Smart Nation infrastructure and applications and facilitate collaboration with citizens and businesses to co-develop technologies.
• Join us as we support Singapore's vision of building a Smart Nation - a nation of possibilities empowered through info-communications technology and related engineering.
• Our objective is to catapult our government infrastructure into the new digital era with faster time to market, operational agility, automated deployment and scalability.
• We are an agile development and operations house that is bold, agile and collaborative.
• The team is responsible for designing, prototyping, building and operating different products and services.
• As a Software Engineer (frontend), you will help to level up the team's competency with your valuable past experiences.
• Experiences of failure are just as important as those of success.
• You will drive, implement, deploy, maintain and operate products or key components of your products. You will work closely with different teams to deliver the best possible and impactful solutions.
• If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join our team. Make a difference by taking up the key role and be part of the passionate and inspirational team.
• Ownership over feature design and implementation, with a focus on sound technical choices and maintainability. At times, this would be in collaboration with other software engineers.

What are we looking for?

• From 3 - 5 years of relevant experience
• Proficient in JavaScript, TypeScript
• Experience in frontend technologies (HTML & CSS etc) as well as any web framework (React Preferred), understand their design principles and application scenarios; and have good practise and understanding of common web compilation and bundling frameworks, including Webpack/Rollup/Babel/AST.
• Familiar with various front-end related debugging and testing tools, and have independent problem-solving skills
• Contribute in technical discussions and solutioning sessions.
• Possess good coding and documentation habits, pay attention to code style, familiar with basic design patterns and principles, and continuously focus and optimize projects
• Autonomy to drive the direction of the product
• Chance to work on creating developer tooling systems from the ground up, from research all the way to implementation.
• Chance to work with different development teams while enabling them to be more productive at the same time
• Excellent teamwork and communication skills; communicating technically complex ideas to non-technical people effectively is a plus
• Having a growth mindset and willing to share knowledge to grow together with the team
• Enjoy making data driven decisions
• Understand that problems can be solved in different ways, sometimes not with engineering; understand how these solutions can and should be evaluated.
• Willing to learn and own fullstack

If would be a plus if you have:

• Experience in fullstack or backend JavaScript (Node.js)/TypeScript or other backend frameworks
• Experience with automated testing
• Experience with deployments cloud infrastructure such as AWS, Azure, or Google Cloud
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Software Quality Engineer Job Description
We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team. In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Key Responsibilities:

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintain the E2E pipeline and promptly address any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

Requirements

• Bachelor's degree in Computer Science, Software Engineering, or a related field. Advanced degrees are a plus.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch.

Soft Skills:

• Strong analytical and problem-solving abilities.
• Excellent communication skills, both verbal and written.
• Ability to work collaboratively in a fast-paced, agile environment.
• Leadership qualities with the ability to mentor and guide team members.