Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Experience: 10+ Years

Role: OpenShift Platform Engineer

Key Skills:

· Containerization, Linux administration, Virtualization, Networking, and Security

· Providing first class level 3 support

· Java Spring Boot, Helm, OpenShift, Kubernetes

Key Responsibilities:

· Design, implement, and configure OpenShift clusters and containerized applications

· Develop and maintain technical documentation related to design, configuration, usage, troubleshooting, backup, recovery, etc., for all OCP environments

· Provide Technical assessment and advisory in relation to design, installation, configuration, including system upgrade and migration of OCP environment, including the operators for OCP

· Collaborate with development teams to onboard and optimize applications on the OpenShift platform

· Implement best practices for containerization, orchestration, and automation using OpenShift

· Troubleshoot Red Hat OCP configuration and services and container issues, working in collaboration with other relevant IT areas and vendor support towards a quick and effective resolution

· Work on container security solutions and ensure compliance with security policies

· Manage OpenShift clusters for performance, availability, and capacity planning

· Perform assessments and health checks of existing solutions and provide best practice recommendation and guidance to Support team.

Automate deployment process.

Key Requirements:

· Minimum 10 years of practical experience in the implementation of OpenShift/Kubernetes environments

· Expertise with the RedHat OpenShift Container Platform/Kubernetes.

· Experience in dealing with container configuration management, especially Helm and app-of-apps concepts.

· Experience working with infrastructure as code technologies such as Ansible, Terraform.

· Knowledge of application development, ideally Java Spring Boot.

Experience in CI/CD Pipeline.

Mechanical Engineer (ACMV)

The Role:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team

Benefits:

• Monday to Friday; 8.30am - 5.30pm
• Working Location: Commonwealth
• Basic + Allowances, $4500 - $5000
• Up to 3 months Bonus

Requirements:

• At least 5 years relevant experience in ACMV industry
• Knowledge in BIM would be advantageous

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

For FAST response, whatsapp to 6038 0508, with the following information:

1) Your Name
2) Your staying location
3) Your availability to start work

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Sng Shoo Woon

Registration Number: R1110625
AlwaysHired Pte Ltd
EA Licence No: 24C2293

Job Description & Requirements

We are seeking a Senior Data Engineer with 7+ years of experience in software development and expertise in Big Data technologies. The ideal candidate will work on designing, developing, and maintaining scalable data pipelines and analytics platforms to meet diverse business requirements.

Responsibilities:

Build and optimize large-scale data pipelines using Hadoop, Spark (Core, SQL, Streaming), and PySpark.

Manage and process structured and semi-structured data using Hive, Sqoop, Impala, and Kudu.

Develop and implement streaming data solutions with Apache Kafka.

Collaborate with cross-functional teams to understand technical requirements and implement data-driven solutions.

Perform data validation, quality checks, and recon reports to ensure high data accuracy.

Work on AWS services (S3, Glue, Athena) for cloud-based data workflows and analytics.

Translate legacy systems to open-source frameworks, leveraging technologies like Python and SQL.

Optimize performance and scalability for data processing and storage systems.

Utilize Java/J2EE, Hibernate, and Struts frameworks for backend application development.

Provide mentorship to team members and support in troubleshooting and debugging complex data issues.

Requirements:

Proficiency in Big Data ecosystems, Spark, Hadoop, and related technologies.

Strong experience with PySpark, data transformation, and aggregation techniques.

Hands-on with AWS services and cloud-native data pipelines.

Solid understanding of SQL, RDBMS, and data integration tools.

Expertise in Java/J2EE frameworks and application development.

Strong communication and problem-solving skills.

Responsibilities:

• Design, build, implement, migrate, troubleshoot, and maintain IT network infrastructure backup, security, redundancy, and disaster recovery.
• Planning and management of user-side computers.
• Planning and execution of IT operations project tasks.
• Establishment, maintenance, and management of servers, networks, and cloud infrastructure.
• Studies and validates network architecture by developing and completing usability test plans. Recommends upgrades.
• Evaluates and reports network status to key stakeholders.
• Assistance in the implementation of ISO27001 information security mechanisms and related security systems.

Requirements:

• Bachelor's degree in Computer Science, Information Technology, or related field.
• Proven experience in digital infrastructure architecture, network design, and cybersecurity strategy.
• Proficiency in cloud platforms, network monitoring tools, and cybersecurity frameworks.
• Strong analytical skills and the ability to communicate complex technical concepts to non-technical stakeholders.
• Certifications such as CISSP, CCNA, Azure Certified Solutions Architect, or AWS Certified Solutions Architect are a plus.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24630

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

• Processing PO to supplier
• Coordination on income and outgoing shipment
• Prepare documents including DO & Invoice & packing list to customer
• Assists in year end stock take.
• Preparation quotation, follow up with customer on every quotation and report.
• Packing, testing and assemble of equipment.
• Proficient in Microsoft Office.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Key Responsibilities:

• Design, develop, and maintain scalable cloud-native applications using .Net Core (C#), Web API, and modern technologies
• Build seamless front-end experiences with Reactjs, Nextjs, and integrate with back-end services
• Develop data access layers using Entity Framework Core and integrate with PostgreSQL and AWS Redshift databases
• Deploy, monitor, and manage applications on cloud platforms (AWS, Azure), utilizing services like Lambda, API Gateway, S3, and CloudWatch
• Develop and maintain containerized applications using AWS EKS or Openshift
• Collaborate with cross-functional teams to design, develop, and ship new features
• Ensure high-performance, quality, and responsiveness of applications
• Maintain code quality through reviews, unit tests, and best practices
• Troubleshoot, debug, and upgrade existing software
• Stay current with emerging technologies to improve efficiency and scalability

Requirements:

• Education: Degree in Computer Science, Information Technology, or related field
• Technical Experience:
  • .Net Core (C#) and Web API
  • Entity Framework Core
  • Nextjs, Reactjs, and Nodejs
  • Database experience (Postgres, AWS Redshift)
  • Cloud-native app development (AWS/Azure preferred)
  • Container platforms (AWS EKS, Openshift)
• Nice to Have: Familiarity with Python

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

Responsibilities :

• Establish Detection to have 100% Inline visibility and Inline control

• Improve Detection strategy, system, and methods to continuously strengthen detection performance.

• Enhance Detection capability and strategy to enable Yield improvement, improve Cycle of Learning and strengthen Defense Line.

• Establish and improve BKM (Best Known Method) related to RAM Detection performance, RAM detection cost and RAM supplier engagement

• Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.

• Set up process parameters for Inspection and Measurement equipment.

• Plan and Evaluate through supplier demo, tool evaluation or H2H (head to head) and Promote new equipment/ material through TOR (Tool of Record) process.

• Implement abnormal analysis and improvement.

• Facilitate and drive global peer groups (HVM and TD) to ensure alignment on strategy and roadmap to achieve area objectives

• Prioritize resources (internally across network and/or externally with Suppliers) to close any gaps.

• Lead Copy Smart Team (CST) and hold the teams accountable to deliver to timelines/commitments. Support cross sites alignment activities through CST and provide strategic direction for the team.

• Set Business Process to handle your area(s) of responsibility to meet the expectations of programs and business processes and adhere to the standards required by those programs and processes.

• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.

• Be part of the team to handle global business for RAM area, including Tool of Records (TOR), Model of Records (MOR), Manufacturing Tool Evaluation Program (MTEP), DOC2, Executive Review Meeting (ERM), Supplier Change Notice (SCM) documentation etc.

• Keep Acceptance Documentation and Configuration Specs (ADCS) updated to current TOR configuration in your area(s) of responsibility.

• Handle projects with proper Project Management process with metric to track project success.

• Initiate, develop, drive and support strategies that not only benefit one site, but Micron network as a whole.

• Identify and share Best Known Method (BKM) across sites and track compliance to agreed upon alignment to BKMs.

• Track Fab performance metrics for benchmarking purposes. Identify gaps and area of improvements for Fabs.

• Partner with Technology Development and Global Procurement to drive suppliers' competitiveness in RDA and Metrology area to reduce CapEx and OpEx.

• Provide tactical support and coordination for the Fabs as required for issues of People, Safety, Time to Mature cummulative Yield, Quality, Cost, and Cycle Time.

• Engage and drive suppliers on Tool roadmap (MRM), Technology sharing, and other projects

Requirements :

• Masters/Bachelors in Engineering

• Relevant working experiences in RDA and/or Metrology

• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals. Work with suppliers to address issues of spares delivery, quality, performance and change management.

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management, and Purchasing.

• Promote worldwide sharing and transfer of area-specific domain knowledge

Working Location : 1, North Coast Drive, Singapore 757432

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Location: Tuas Link
Working hours: Mon to Fri, 8am to 5pm
Salary: Up to $4,000

Job scope:
• Oversee the maintenance of the building, facilities and security of the site.
• Coordinate and perform inspections, testing, routine maintenance and repairs on all site equipment (such as electricity, fuel & water supply, HVAC, security and fire safety systems).
• Provide updates to the Facility Manager regarding issues to be addressed, ensuring that critical systems are fully operational.
• Liaise and supervise contractors on-site during maintenance and repair activities.

Requirements:
• Min. Diploma in facilities management or any relevant engineering discipline
• Singaporean or PR only

Please email your updated resume with your last drawn salary, notice period and expected remuneration to [email protected] to apply.

Sylvie Yong (R1769137)
The HR Ecology Pte Ltd (13C6391)

Key Responsibilities:

• Conduct site acceptance tests, oversee commissioning processes, and assist with the start-up of Insulating Glass machinery.
• Interface with customers for after-sales service, identify their needs, and provide tailored solutions.
• Address and resolve on-site maintenance issues by troubleshooting and offering technical support.
• Work collaboratively with customers to fulfill repair schedules effectively.
• Deliver training sessions to help customers optimize product performance.
• Provide feedback from the field to engineering and production teams for product improvements or new designs.
• Ensure compliance with validation processes, including product applications, controls, and documentation.

Requirements:

• Must be very willing to travel as there are times the travelling can take up to 8 weeks.
• Physical ability to handle heavy machinery parts and tool kits (>30kg).
• Ability to read and interpret technical drawings.
• Prior working experience in a technical servicing role is a must.
• Hands-on experience in servicing and the ability to work independently at job sites.
• Willingness to travel for service assignments within the SEA region.
• Strong problem-solving skills and a customer-focused mindset.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Description

• Oversee ICA (Instrumentation, Control and Automation) related design for process plant (water/wastewater plant, incineration plant, etc.), from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimize the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Review project specifications, technical proposal/design documentations from the ICA subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings.
• Support ICA related procurement work, develop cost estimates for ICA products and ICA works, and prepare the schedule for ICA works.
• Oversee project coordination, ensuring project is on schedule and is running smoothly, including handling technical matters at site, managing ICA subcontractor/supplier and working on site with clients and other stakeholders.
• Supervise installation and testing and commissioning of ICA works.
• Perform other duties as assigned by the management.

Requirements

• Minimum 4 years of experience in process plant electrical EPC work with Degree in Electrical , Electronic or Instrumentation Engineering or related Engineering Discipline. For Diploma holder, minimum 6 years of experience is required. For senior position, candidate must have at least 8 years of experience.
• Familiar with relevant code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D/Bentley is preferred.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• In-depth knowledge of control system architectures, such as PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater or incineration related control system.
• Relevant experience in ICA design and site work for water, wastewater treatment and incineration works.
• Able to work in Tuas area.

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

TikTok Location Team's goal is to deliver user-facing products based on the location that connects people with places, localized content, and services in the real world around the globe.

- Develop large-scale software systems that power TikTok app.

- Improve system design and architecture to ensure high stability, performance and reliability of the product.

- Collaborate with multiple cross-functional teams to deliver high quality work in rapid product development.

Qualifications

Minimum Qualifications

- Proficiency in building backend services for large-scale consumer-facing applications

- Proficient in at least one of the following languages: Go, Python, Java, C++.

- Deep understanding of computer architectures, data structures and algorithms.

Preferred Qualifications

- Bachelor/Master Degree in Computer Science or related major

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

up to 4200

Science Park

* Support start-up, contract maintenance and other service activities with emphasis on safety and protection.

* Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.

* Participate in service and repair of personnel protection equipments, safety activities, emergency response, breakdown calls and ad hoc projects.

* Manage all orders efficiently until fulfilment stage, by working closely with Service team.

* Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.

* Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.

* To provide support to other service activities that may be assigned in the course of work

* Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.

* To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

How to Apply: Please send your resume to:

Job Description:

• Analyse client needs, scope problems, and develop business cases to address them.
• Document requirements, source, and evaluate alternatives, and recommend suitable solutions that best aligns with specific client needs.
• Collaborate with client and application vendors for solution design and to seek clarification and acceptance.
• Design, develop, and deliver software applications that satisfies customer expectations.
• Improve software quality using XP practices, including code review and unit testing.
• Prepare architectural and other technical documentation.
• Assist Business Analysts with user stories elaboration.
• Support QA teams with test automation and bug fixes.
• Assist DevOps teams with build and release automation.
• Work with Client users to ensure smooth deployment and adoption of new solutions.
• Assess business needs for service requests and the impact of enhancements to the system.
• Evaluate problem resolution approaches and implement effective recovery plans for ICT incidents, establishing processes to prevent recurrence.
• Understand IT management policies, quality management policies, and security guidelines to ensure compliance in development processes.

Job Requirements:

• Degree or Diploma in Computer Science, Computer/Electronics Engineering, Information Technology or related disciplines.
• Prior experience with version control systems such as Git.
• Proficiency in front end technologies such as Angular.
• Prior experience in backend technologies such as Java, Python, Node.js.
• Proven experience in low code application platforms such as Pega.
• Knowledge in one or more of the following processes: agile processes, continuous integration/deployment, cloud/PaaS platforms (e.g., AWS, GCP), serverless frameworks, and container technology like Docker would be an added advantage.
• Prior experience with low code development and wireframing tools such as Figma
• Familiarity with unit testing.
• Additional advantageous traits include being self-driven, independent, strong problem-solving skills, good communication, interpersonal skills, and excellent presentation and listening abilities.
• Hands-on experience with at least one full project development lifecycle in Pega.
• Relevant professional certification in Pega is a plus.
• Prior experience in Agile and UX development environments is an added advantage.
• Advantageous skills include consulting or business analysis experience, knowledge of system solutioning for mid/large-scale projects, understanding of web services, REST APIs, sFTP, and security concepts.
• Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests.
• Ability to define system interface specifications.

Job Description:

• Analyse client needs, scope problems, and develop business cases to address them.
• Document requirements, source, and evaluate alternatives, and recommend suitable solutions that best aligns with specific client needs.
• Collaborate with client and application vendors for solution design and to seek clarification and acceptance.
• Design, develop, and deliver software applications that satisfies customer expectations.
• Improve software quality using XP practices, including code review and unit testing.
• Prepare architectural and other technical documentation.
• Assist Business Analysts with user stories elaboration.
• Support QA teams with test automation and bug fixes.
• Assist DevOps teams with build and release automation.
• Work with Client users to ensure smooth deployment and adoption of new solutions.
• Assess business needs for service requests and the impact of enhancements to the system.
• Evaluate problem resolution approaches and implement effective recovery plans for ICT incidents, establishing processes to prevent recurrence.
• Understand IT management policies, quality management policies, and security guidelines to ensure compliance in development processes.

Job Requirements:

• Degree or Diploma in Computer Science, Computer/Electronics Engineering, Information Technology or related disciplines.
• Prior experience with version control systems such as Git.
• Proficiency in front end technologies such as Angular.
• Prior experience in backend technologies such as Java, Python, Node.js.
• Proven experience in low code application platforms such as Pega.
• Knowledge in one or more of the following processes: agile processes, continuous integration/deployment, cloud/PaaS platforms (e.g., AWS, GCP), serverless frameworks, and container technology like Docker would be an added advantage.
• Prior experience with low code development and wireframing tools such as Figma
• Familiarity with unit testing.
• Additional advantageous traits include being self-driven, independent, strong problem-solving skills, good communication, interpersonal skills, and excellent presentation and listening abilities.
• Hands-on experience with at least one full project development lifecycle in Pega.
• Relevant professional certification in Pega is a plus.
• Prior experience in Agile and UX development environments is an added advantage.
• Advantageous skills include consulting or business analysis experience, knowledge of system solutioning for mid/large-scale projects, understanding of web services, REST APIs, sFTP, and security concepts.
• Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests.
• Ability to define system interface specifications.

About i-Consult Tech Pte Ltd (I-Consult)

i-Consult Tech Pte Ltd (I-Consult) - a wholly owned subsidiary of the i-Consult Group HK Limited in Hong Kong -- is one of the leading IOT solution provider in Hong Kong, Macau & Singapore (Asia Pacific) region with the focus to help both Government and Enterprise sectors to select, architect and implement advanced & integrated IOT solutions to empower their business & operation.

i-Consult Group HK Limited is also a member of Cyber World Creations HK Ltd., who established since 2000, being a leading System Integrator providing industrial platform solutions and Design Manufacturing Services (DMS).

I-Consult provides leading edge one-stop-shop IOT solutions of modernized infrastructure, IT security, cloud platform, updated IOT devices and a broad portfolio of IT services that serve the needs of the sectors including education, hotel, residential & health care sectors.

We are committed to deliver top quality services by conforming to important ISO/IEC quality standards backed by our established best practices and effective service management systems and processes.

I-Consult offers an excellent value proposition with its expertise of experienced professionals, and offshore facility with state-of-the-art information technology infrastructure and competent associates at an extremely cost-effective price.

Part Time Systems Engineer

Responsibilities

We are seeking for a resourceful, experienced and committed individual to manage the following:

· Manage and track day to day progress of projects being assigned

· Perform project/application assessments and evaluation

· Assist test team in creating test plans and testing efforts

· Efficiently identifies and solves project/application issues

· Maintain application and project documentation

· Ensure sufficient, standard and reliable systems infrastructure

· Provide standby support for critical systems

· Provide daily IT technical support including system testing, system deployment and operational maintenance.

· Coordination, planning and execution of routine Maintenance job for contract customers.

· Assist with pre-sales and projects including coordinate, monitor and implement IT solutions for customers.

· Any other tasks and/or duties assigned by the supervisor or manager

· Ad hoc duties as assigned.

Requirements

· Possess at least a Diploma, Advanced/Higher/Graduate Diploma in EEE, Communications, Computer Science, IT, Mechatronics or equivalent.

· Min 2 years of project coordination experience

· Min 2 years of experience in coordinating and support IT business processes

· Knowledge in Java.Net and/or mobile development skills advantageous

· Basic knowledge MS-SQL Database administration including data backup, recovery, security and integrity.

· Familiar with Linux and Windows server environment.

· Experience/Knowledge on other database engines (ie. MySQL) will be advantageous

· Knowledge on Web or mobile application development and architecture will be advantageous.

· Strong interpersonal and communication skills

· Able to work independently and under pressure to meet system performance service levels

· Self-motivated with excellent customer service skill

· Able to multi task, work independently and prioritize workloads effectively

· Strong Interest in the field of IT, positive attitude and a willingness to learn

· Possess good analytical thinking and troubleshooting skill.

· Knowledge of RFID preferred.

· Good analytical and problem solving skills on technical level.

· Good teamwork and communication and planning skills

Interested applicants please email your detailed resume stating your working experience, earliest available date, current & expected salary and a recent CV / Resume to info@i-consulttech.com/[email protected]

• Receive Service Request / Incident through phone, email and Helpdesk Ticketing tool.
• Basic technical support at the End User Computing (EUC) and network level: PC, iPad, Laptop, WAN and LAN.
• User Account Management (Add, Delete and Change) and follow Change Management processes.
• Escalate to Level 2 engineer if the issue not resolved.
• Remotely assist users with support needs.
• Manage and monitor internal assets to ensure accurate inventory records.

• Singapore Based (Jurong Island - Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5000 + $200 (site allowance)
• Working experience in the chemical industry; Deep knowledge of Safety legislation and regulations in the chemical industry.
• Career Progression Opportunities

Responsibilities:

The Production Engineer (HSE) is responsible for Daily Operations and Projects Safety, the Lead to reviewed, improvement and compliance to all Safety regulations and requirement. Manage the Operations Risk Assessment and ensure occupational Safety

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site.
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities.
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation.
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed.
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline.
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner.
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date.
• Lead and enhance any other HSE related improvement projects/activities.
• To perform any other duties or assignments as assigned by superiors.

Requirements:

• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry
• Diploma / Degree in Engineering, health, safety, or environmental field of study

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

You're a Software Engineer with excellent technical, communication, and organizational skills, combined with deep software knowledge on C#, C++ and VB.

Responsibilities

• Software development for Industrial Automation Machines using C# Visual Basic, C++

• Liaise with customers on machine specification.

• Evaluate and implement other possible system for machine programming.

• Test and troubleshoot machines.

• Conduct machine training.

Requirements

• Degree/ Diploma in Electrical Engineering/ Computer Science.

• Developing software for Windows-based applications.

• Experience in designing Automated machine is an added advantage.

• Proficiency in C# language.

• Knowledge of C++ and Visual Basic language.

• Ability to work under tight deadlines and self-motivated.

• Problem solving/ troubleshooting skills.

• Initiative and able to work independently.

• Good coordination/ communication/ presentation skills.

• Good command of English.

Your role

Our major Oil and Energy Downstream Client is urgently looking for Electrical Execution Engineer who will be responsible for executing and managing Electrical scope/element of capital projects in the Development and Execution phase in a safe, timely, reliable and within budget. You will provide technical review, scope clarity, cost estimate & schedule input, constructability etc for Capital Project in the early Project phases (Select/Define). You will supervise team of Electrical contractors & work with EPCm to support delivery of Site Capex Plan. To perform planning and execution of Turnaround (TA)/pitstop for Instrument scopes.

• Ensure that HSE considerations are consistently treated as high priority throughout engineering, construction, and turnover.
• Act as a leader and role model to promote a robust health, safety, and environmental culture in the project community.
• Maintain compliance with the project & TA safety assurance plan to ensure that work is accomplished in an environmentally sound manner using safe work practices, following company HSSE policies and procedures.
• Participate in the project & TA construction Risk Assessment process prior to contractor mobilization and conduct Safety Observation and Conversations at the job sites to help achieve Goal Zero.
• Provide support and inputs to contractor risk assessments and mitigation plans supporting the use of tools such as a Job Hazards Analysis and daily Task Hazard Assessments.
• Coordinate and lead the Permit to Work (PTW) process.
• Support contractor to identify, coordinate, and mitigate risks associated with Simultaneous Operations (SIMOPs) if any.
• Respond to safety incidents following proper incident notification process, participate in investigations, and complete action items as required to prevent reoccurrence.
• Develop TA/Pitstop/Project construction execution plans for each assigned project.
• Comply, participate, and implement relevant project and project & TA management processes, engineering and quality practices and site OP/WIs
• Achieve Project and TA KPIs (e.g., safety, scope certainty, costs, schedule etc.) and benchmarks targets.
• Provide electrical temporary supply as required during Project & TA/pitstop.
• Implement Project & TA/pitstop QA/QC plan and electrical safety rules (including isolation/de-isolation, LOTO)
• Facilitate and document Constructability Reviews with Engineering and Operations to optimize construction and help prevent field rework.
• Support Project Engineers in the through the ORS process in Assess, Select, Define and Execute engineering stages of projects, as required.
• Provide review of project construction & TA cost estimates with respect to scope accuracy and level of effort and monitor actual costs against the approved budget.
• Provide input into the scheduling of projects & TA to meet project milestones and maintainconstruction resources to acceptable levels.
• Monitor progress of field activities to ensure scheduling milestones and critical path are understood and committed dates are being met.
• Review contractor work performance and drive a focus on quality of work and a strong safety culture.
• Ensure contractors follow applicable project construction & TA procedures.
• Ensure good co-operation between the project & TA organization, contractors, and Operations.
• Coordinate with Operations and Project Engineer & TA Lead to ensure that proposed construction and work methods are clearly understood and accepted.
• Review contractor Tie-In /Cutover Plans, etc. and monitor work in progress to ensure compliance with the approved plans endorsed by Technical Authority.
• Coordinate between in house contractors, design engineers, vendors and the Project Engineer to resolve field discrepancies in design packages and address material delays and complex troubleshooting issues.
• Ensure equipment and manpower resources are being used efficiently.
• Network with various departments to ensure all appropriate permits and regulations are followed.

You are we are looking for if you:

• Have Diploma/Graduate Degree in engineering discipline (Electrical/Instrument) or equivalent technical work experience in the electrical/instrumentation trade
• Have 5-10 years of Project execution/construction experience for Electrical in oil and gas, downstrea, chemical, and/or refinery industries
• Have strong Planning, Coordination and Stakeholder management skills in managing and executing projects with significant Electrical scope
• Have strong understanding of field installation, construction, and commissioning of electrical. This includes quality control, complex troubleshooting, FAT/SAT
• Have execution Experience in a major Turnaround
• Have experience with HV & LV switchgear/transformer, motors, VSD, UPS, EDG preferred
• Are able to understand and articulate complexities and risks during new HV & LV system tie ins to existing LIVE distribution systems
• Have experience with PLC, SCADA/ENMCS preferred
• Have demonstrated experience delivering projects in an operating plant or other brownfield environment with a focus on minimizing disruption of ongoing operations
• Have track record for HSE leadership and delivery
• Have knowledge and experience in project/activity scheduling and interpreting cost reports for cost control tracking and intervention
• Have experience with quality and engineering documentation requirements necessary for turnover of completed installations
• Have knowledge of industry standard HSE policies and procedures and of industry standard Quality Assurance program requirements
• Have experience with Permit to Work (PTW) process as well experience with Request for Information process (RFI) for field clarifications and change management during construction
• Have experience with front line troubleshooting of electrical, defect identification and root cause analysis (RCA) or causal learning
• Have strong communication skills and ability to breakdown technical details to non-technical stakeholders

Job scopes:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Job Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

In an effort to complement our software development initiative, we are looking for a Senior Java Software Engineer for the design and implementation of back-end applications. It is for a financial industry player with a global presence.

Responsibilities

• Design and implement Java application with Spring boot
• Write clean, sleek, test-driven, modular, and highly reusable code and maintain configurations
• Manage deployment and product life cycle in AWS
• Automate the build, test, and deployment

Skills & Qualifications

[Mandatory]

• Deep knowledge of Java 8, 11
• Good experience in Java Spring Boot framework
• Good understanding of RESTful web services
• Able to deploy products in AWS
• Experience in all levels of testing
• Strong and proven skills in problem-solving and writing efficient code
• Banking/financial industry software development experience

[Advantageous]

• A full stack development experience with front-end technology e.g. JavaScript, HTML/CSS
• Strong skills in TDD and a good level of understanding of the continuous integration principles
• Understanding and experience in working with the Spring framework including IOC, multithreading, batch processing, and restful services integration in Spring Framework
• Strong development skills in the AWS platform using tools such as Elasticbeanstalk, SQS, SNS, ElasticCache, RDS, Lambda Kinesis, etc.
• Understanding and experience in JPA, Hibernate, and ORM
• Hands-on experience in working with Linux-based deployment environments