• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

As Satellite Planning Engineer, you are responsible to work with the various central and site stakeholders to conduct strategic scenario and capital planning analysis. You will be closely involved in the Fab Scenario Optimization Study, Business Plan, Supply Chain and key processes such as Supply & Operation Planning (SnOP) and Model of Record (MOR).

This role requires flexibility and ability to maintain global relationship; good communication and presentation skills; and ability to provide clear and qualitative data analysis for the upper management to support decision making. You should possess detailed understanding on capacity planning, business process, and identifying opportunities to support scenario optimization.

Responsibilities and Tasks:

[Scenario]

• Apply optimization concept and technique to ensure optimal loading volume across horizon able to meet target bit (GB) and market share while considering new technode qual milestone and ramp planning.
• Apply industrial engineering concepts to model the capacity thresholds to support existing and future technology
• Ensure all the required scenario options are well analyzed. Call out opportunity and propose options for better return scenario
• Collaborate with Central teams to plan capacity requirements of future products and to quantify the impact on existing and future capital spend
• Using qualitative and quantitative analysis to explain scenario cause – effect relationship for tooling purchase and capital impact differences
• Provide yellow field cost of transition (CoT) for each technode and understand the correlation between theoretical CoT vs actual CoT
• Defining new technode CoT and understand the gap between budget vs actual technode capex
• Adhere to calendar requirements and agreements with respect to Business Planning Process
• Flexible and agile to changes in Business Planning
• Coordinate with all relevant stakeholders to ensure all the parameters updates are in-place so that can be utilized correctly for quarterly business plan study
• Create, Maintain and update Satellite Sharepoint
• Strive to streamline business efficiency and eliminate manual errors
• Manage complex projects across several different departments and sites
• Manage databases, scenario ownership and change control
• Analyze data to support financial decisions

​

[Capital]

• Perform baseline capital spend analysis to ensure overall cashflow across FY is kept neutral (unless driven by Scenario change)
• Improve capital spend forecast accuracy with site Planning/Procurement/Facilities
• Monitor actual spend performance vs projection for current and upcoming quarter with target variance of < +- 5%
• Monitor and understand with site stakeholders on the reasons for unexpected capital spend changes across fiscal year
• Work with site stakeholders to ensure accurate planning and supplier delivery date data inside Capital Asset Lifecycle Management (CALM
• Highlight any potential cashflow reduction or savings opportunities
• Keep track of the technode capex
• Work with site stakeholders to ensure actual scenario change bottoms up and eventual itemization is as per approved executive review targets
• Coordinate the CALM simulations with site stakeholders and ensure the simulations are able achieve net neutral and completed within committed timeline

Requirements:

• Master/Bachelor's degree in industrial engineering, manufacturing engineering, mechanical engineering, chemical engineering, computer Science
• Strong ability to perform data analysis and problem solving
• Strong data validation skills and reporting skills
• Ability to map relevant conclusions to support decisions making
• Ability to work closely and effectively with others in a team environment
• Strong verbal communication and presentation skills
• Exceptional customer focus
• Knowledge and practical application of statistics, data analysis and problem solving
• Independence and high determination to complete tasks in a timely manner

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform sales and business development for assigned region.
• Create and implement sales and marketing strategies to achieve sales target.
• Liaise with customers and design engineers to specify the products.
• Continuous search business opportunities and expand market share.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of sales experience with good connections in Petrochemical/EPC/Power Plants industry.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to[email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

We are seeking a highly skilled and experienced Network and Communication Operations Engineer to join our team and provide oversight for the design, implementation, and management of SIA Group's Network operations. The primary objective of this role is to ensure maximum network availability and functionality to help SIA achieve its business objectives

Responsibilities includes:

•Continuous transformation of the network infrastructure to enhance availability and automation

•Offer network consultancy project support to ensure that IT services comply with SIA architecture and standards

•Create technical solutions for complex requirements

•Run large-scale network operations, including strong service management knowledge in a multi-vendor environment

•Have Level 2 and preferably L3 experience in various networking technologies including

oSDWAN (Cisco Viptela, Versa, etc

oWireless (Aruba)

oVoice, Contact centre and Collaboration

oLAN (Cisco and Aruba)

oNAC (ISE and Clearpass)

oAutomation experience (Ansible or Python)

•Possess relevant knowledge and experience in cloud technologies

•Track, POC and plan technology refresh

•Deliver large-scale IT projects on time, within budget and of satisfactory quality

•Manage outsourced vendor(s) and internal team including various Service Delivery meetings

•Lead and coordinate incident resolution across different vendors

•Ability to work in a team with 24*7 support

Requirements:

•Degree with at least 6-10 years of network experience in managing Network Operation in a multi-vendor(s) environment on at least two of the following multiple domains:

oSecurity,

oNetwork Automation

•Relevant certifications in Networking (e.g. Cisco, Aruba, Versa) are preferred

•Understanding of SDWAN, Voice, Wireless and LAN architectures, experience in planning, design & implementation of Network infrastructure

•Excellent problem-solving, logical thinking skills to isolate and identify potential issues in a complex environment

•Excellent communication & interpersonal skills

•Effective consulting and communication skills

•Demonstrated industry awareness

Senior Sales Engineer

Working Days & Hours: 5 days | Mon-Fri: 8.15am to 5pm
Working Location: 20 Pioneer Crescent (Pick Up/ Drop Off at Boon Lay MRT)
Salary Range: $4200-$5200 + VB

Job Responsibilities:

• Receive inquires & purchase orders on company’s products (Extruders / Gas Compressors)
• Responsible for aftersales activities on company’s products in S.E.A. market
• Periodical visit , technical discussions and consultation for the machines supplied from Japan to customers
• Travel to Japan of our Tokyo head office or Takasago factory with the customers for meetings
• Discuss usual maintenance and periodical overhauling work with customers
• Submit visit report and communicate with Tokyo head office or Takasago Factory
• Provide support work for head office and customers (communication, delivery etc.) of repair/modification in Japan
• Make arrangement of hotel reservation, transportation for head office’s supervisors who visit customers and accompanying with them
• Troubleshooting support at the customers’ plant including visit to the customers, transferring the information what is happening in the field to Takasago factory etc.

Job Requirement:

• Relevant Experience
• Able to go Business Trips to SEA countries (about 2-3 times a month)

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

• New Product process design and line setup.
• Understand SAP concept and align process design
• Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members.
• Draft the implementation schedule to meet target date, disseminate and finetune the scheduled with production PICs for the implementation to be carried out smoothly.
• Follow up with related members and enforce the usage of systems developed for operation change tracking.
• Understand key functions and product master setting rules of ERP (SAP) system, process-related inline systems, traceability requirements, to align the process design with the systems.

Requirements:

• Diploma/Degree in Engineering Electrical & Electronics.
• Prefer 2 year(s) of working experience in the related field in the PCB manufacturing environment.
• Good statistical and analytical skills.
• Good communication, planning and coordination skills.
• Entry level are welcome as training will be provided.
• Travelling to Batam Factory and staying for project (min. 2weeks to max 2 months stay per visit depending on project requirements.

Electronics Manufacturing Industry

East Area/Bedok Area

5 days work week

Interested candidates, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Cloud Native Engineer

This is a 6 or 12 months contract assigned to our client

Work Location: To be confirmed (during interview)

Salary: $7,000-$8,250

A Databricks Engineer is responsible for migrating from as-is on-perm data warehouse to Databricks and sound

knowledge of Databricks. Requires good understanding of data architecture, cloud solutions, building and maintaining

a robust, integrated, and governed data infrastructure. The role involves extracting valuable insights from data while

ensuring data security, compliance, and high-quality data management.

Roles And Responsibilities:

• Lead end to end data migration project from on-premises environments to Databricks with minimal downtime.

• Work with architects and lead solution design to meet functional and non-functional requirements.

• Hands on experience in Databricks to design and implement the solution on AWS.

• Hands on experience in configuring Databricks clusters, writing Pyspark codes, build CI/CD pipelines for the

deployments.

• Highly experienced in optimization techniques (Zordering, Auto Compaction, vacuuming)

• Process near real time data through Auto Loader, DLT pipelines

• Must have strong background in python and able to identify, communicate and mitigate risks and issues.

• Identify and resolve data-related issues and provide support to ensure data availability and integrity.

• Optimize AWS, Databricks resource usage to control costs while meeting performance and scalability

requirements.

• Stay up to date with AWS, Databricks services, and data engineering best practices to recommend and

implement new technologies and techniques.

• Proactively implement engineering methodologies, standards, and leading practices.

Requirements / Qualifications

• Bachelor’s or master’s degree in computer science, data engineering, or a related field.

• Minimum 5 years of experience in data engineering, with expertise in AWS or Azure services, Databricks, and/or

Informatica IDMC.

• Proficiency in programming languages such as Python, Java, or Scala for building data pipelines.

• Evaluate potential technical solutions and make recommendations to resolve data issues especially on

performance assessment for complex data transformations and long running data processes.

• Strong knowledge of SQL and NoSQL databases.

• Familiarity with data modelling and schema design.

• Excellent problem-solving and analytical skills.

• Strong communication and collaboration skills.

• Databricks certifications, and Informatica certifications are a plus.

Preferred Skills:

• Experience with big data technologies like Apache Spark and Hadoop on Databricks.

• Experience in AWS Services focusing on data and architecting.

• Knowledge of containerization and orchestration tools like Docker and Kubernetes.

• Familiarity with data visualization tools like Tableau or Power BI.

• Understanding of DevOps principles for managing and deploying data pipelines.

• Experience with version control systems (e.g., Git) and CI/CD pipelines.

• Knowledge of data governance and data cataloguing tools, especially Informatica IDMC.

6 months to 1 year, will confirm the duration upon offer stage

Brief Summary:

• Basic up $3500
• Mon to Fri: 8.15am - 5.00pm
• Location: Redhill
• Permanent Role + AWS + VB + Oversea Travel Allowance + 14 AL

Job Responsibilities:

• Commissioning, Testing, Troubleshooting of glass-processing machineries on client sites (local & overseas)
• Interact with clients to provide training, gather feedback & complaints
• Feedback to engineering teams for new product designing/ refining existing machineries

Job Requirements:

• Min. 2 years of relevant experience
• Min. Diploma in Mechanical/ Electrical/ Mechatronics Engineering
• Willing to travel overseas frequently (monthly, to APAC region)

For consideration, kindly submit your CV by clicking “APPLY NOW” or TEXT +65 9422 1220 for confidential discussion.

*Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22111807 | Yap Teng Hui

Brief Summary:

• Basic up $3500
• Mon to Fri: 8.15am - 5.00pm
• Location: Redhill
• Permanent Role + AWS + VB + Oversea Travel Allowance + 14 AL

Job Responsibilities:

• Commissioning, Testing, Troubleshooting of glass-processing machineries on client sites (local & overseas)
• Interact with clients to provide training, gather feedback & complaints
• Feedback to engineering teams for new product designing/ refining existing machineries

Job Requirements:

• Min. 2 years of relevant experience
• Min. Diploma in Mechanical/ Electrical/ Mechatronics Engineering
• Willing to travel overseas frequently (monthly, to APAC region)

For consideration, kindly submit your CV by clicking “APPLY NOW” or TEXT +65 9422 1220 for confidential discussion.

*Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22111807 | Yap Teng Hui

Brief Summary:

• Basic up $3500
• Mon to Fri: 8.15am - 5.00pm
• Location: Redhill
• Permanent Role + AWS + VB + Oversea Travel Allowance + 14 AL

Job Responsibilities:

• Commissioning, Testing, Troubleshooting of glass-processing machineries on client sites (local & overseas)
• Interact with clients to provide training, gather feedback & complaints
• Feedback to engineering teams for new product designing/ refining existing machineries

Job Requirements:

• Min. 2 years of relevant experience
• Min. Diploma in Mechanical/ Electrical/ Mechatronics Engineering
• Willing to travel overseas frequently (monthly, to APAC region)

For consideration, kindly submit your CV by clicking “APPLY NOW” or TEXT +65 9422 1220 for confidential discussion.

*Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22111807 | Yap Teng Hui

- Permanent

- Up to $6000 + VB

- Mon to Fri: 8.30am – 5.30pm

- Jurong East

Job Responsibilities:

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Period:

• Permanent

Location:

• Jurong East

​Working hours:

• Mon to Fri: 8.30am – 5.30pm

Salary:

• Up to $6,000 + VB

Job Requirements:

• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Minimum 2 to 3 years working experience in industry
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred
• Computer literate e.g. MS office, Visio
• Strong Oral and Written Communication Skills
• Excellent Time-management
• Good Learning Capability

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No: R1549023)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201)

3 Shenton Way, Shenton House #19-01 Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

Job Description & Requirements

Responsibilities:

Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; following the software development lifecycle.

Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions

Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code

Prepare and install solutions by determining and designing system specifications, standards and programming

Improve operations by conducting systems analysis; recommending changes in policies and procedures

Update job knowledge by studying state-of-the-art development tools, programming techniques and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations

Protect operations by keeping information confidential

Provide information by collecting, analyzing and summarizing development and service issues

Accomplish engineering and organization mission by completing related results as needed

Support and develop software engineers by providing advice, coaching and educational opportunities

First and foremost, developing software our users need

Mentor junior and mid-level engineers

Collaborate with team to brainstorm and create new products

Grow engineering teams by interviewing, recruiting and hiring

Make informed decisions quickly and taking ownership of services and applications at scale

Work collaboratively with others to achieve goals

Be a persistent, creative problem ­solver

Remain cool and effective in a crisis

Stay on the leading edge of development practices

Passionate about great technologies, especially open source

Understand business needs and know how to create the tools to manage them

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

As a standard cell design engineer in the Physical Design Group, you will develop your skills working on some of the most sophisticated process nodes targeting the largest foundries. You will contribute to designing our physical IP standard cell offerings for our internal and external customers at leading edge nodes including 5nm and beyond. Work with partners inside the company, as well as our partners in the EDA and foundry space.

Responsibilities:

· Design standard cell circuits and verify them for functionality, performance, and power

· Generate and validate EDA model views of standard cells

Required Skills and Experience :

· 5+ years of relevant circuit design experience (for BSEE)

· 3+ years of relevant circuit design experience (for MSEE)

· Experience with transistor level circuit design using Cadence Virtuoso and circuit simulators such as SPICE, SPECTRE

· An understanding of transistor level device physics and standard cell layout

· Knowledge of power, performance, and area tradeoffs

· An ability to learn a wide variety of industry standard view and modeling formats such as Liberty, Verilog, LEF, NDM, APL, GDS

· Scripting skills in either Tcl, PERL or Python

· Dedication to quality, collaboration, curiosity and continual improvement

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Pre-Sales Engineer / Manager (Surveillance Security)

Job Responsibilities:

• Provide comprehensive pre-sales support, focusing on the full range of company products, including CCTV and network technical solutions, tailored for SMBs and cost-effective, easy-to install solutions ideal for residential areas, retail, educational institutions, hospitality, and healthcare sectors.
• Develop and identify new business opportunities by working closely with clients to understand their unique business and technical requirements.
• Promote and present company solutions, delivering formal technical proposals and presentations to clients, emphasizing the cost-effectiveness and suitability of these products for smart home applications and SMBs.
• Design competitive and effective product solutions, ensuring that the proposed solutions meet clients' requirements and are aligned with the company's strategic goals.
• Collaborate with the sales team to ensure client requirements are thoroughly understood and met, facilitating seamless communication between clients and the technical team.
• Address and resolve clients' inquiries and technical issues, ensuring high levels of client satisfaction and long-term relationships.
• Conduct product training sessions for clients, enabling them to fully understand and utilize the company's solutions effectively.
• Educate clients on the availability of these products through retail dealers and other distributors, making them accessible and convenient for widespread deployment.

Job Requirements:

• Proven experience in the CCTV domain, with a strong understanding of SMB and cost-effective, easy-to-install solutions that are ideal for residential areas, retail, educational institutions, hospitality, healthcare sectors, and smart home applications within smart cities.
• At least 1-3 year of work experience in the CCTV or networking industry, with a solid understanding of the products and solutions deployed in these sectors.
• Ability to communicate effectively and influence customers, particularly in areas of technical alignment, communication, clarification, and negotiation.
• Possession of networking certifications such as CCNA/CCNPwould be an added advantage, further demonstrating technical expertise and enhancing the ability to deliver high-quality solutions.

Interested parties, please email to [email protected]

Karin Yong

Registration: R22109239

EA Licence: 01C3135

Job Description

• Industry/ Organization Type: Manufacturing/ Supply Chain
• Position Title: Facility Engineer
• Working Location: Tuas
• Working Hours: 5 days (Monday - Friday, 8 AM - 5 PM)
• Salary Package: Basic Salary + Transport Allowance ($750) + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintenance of building, facilities, and security at all Company’s sites.
• Coordinate and execute, when necessary, inspection, testing, general maintenance, and repair of the critical site systems and equipment.
• Ensure that all equipment and other facilities are working properly.
• Critical systems and equipment include power/ UPS, backup generator, and fuel supply. HVAC (Heating, Ventilation, Air Conditioning), plumbing/ water supply, security doors/ alarms/ cameras, Fire safety systems and equipment.
• Provide situation/ status updates to the Facility Manager on issues which are to be resolved and the critical system or equipment is fully operational.
• Initiate interventions to solve problems in the facilities and develop a system for cleaning, repair and maintenance of facilities.
• Deliver timely and efficient solutions to facility-related requests.
• Liaise with contractors on maintenance/ repair.
• Supervise contractor on-site.
• Review the risk assessment submitted by the contractor prior to the commencement of work.
• Ensure required safety requirements are in place prior to the commencement of work.

APPLY NOW!!!

• Diploma in Engineering or equivalent
• At least 2 years of work experience in Facility Management
• Possess own transport is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

We are looking for a highly motivated individual with software development experience, to join a software company as Lead Application Support Engineer.

• Lead a team of engineers supporting world class custom software applications.
• Salary package up to $5,800 + AWS + VB (~2 months bonus).
• Dynamic working environment.

Responsibilities:

• Lead and run the 24/7 application support team for applications and systems.
• Ensures team members are providing necessary help to the end-users. Train the team members on the application logic/usage, interfaces and features.
• Solve critical issues of the application and system, guide and mentor team members.
• Ownership of all issues that are raised, through to closure within defined SLA.
• Build and maintain good rapport between stakeholders. Handle escalations and manage client expectations on an ongoing basis.

Requirements:

• Diploma/ Bachelor’s Degree in Computer Science or related.
• Minimum 3 years relevant working experience as a Software Developer/ Senior Application Support Engineer/ Team Lead.
• Strong analysis, research, investigation and evaluation skills, with a structured approach to problem solving
• Understanding of IT industry working practices / methodologies. ITIL certification is highly advantageous.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50778 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Job Description:

1. Monitor and maintain critical data centre infrastructure, including power distribution systems (UPS, generators), HVAC systems, fire suppression systems, and access control systems.
2. Perform preventive maintenance on data centre equipment and systems.
3. Respond to alarms, troubleshoot issues, and ensure prompt resolution.
4. Liaise with the building landlord to coordinate maintenance schedules, address building infrastructure issues, and ensure compliance with safety regulations.
5. Support off-office hours activities, including responding to emergency alarms, performing on-call duties, and coordinating with vendors for emergency repairs.
6. Ensure strict adherence to data centre physical security procedures.
7. Follow documented incident response procedures, track incidents to closure, and communicate with stakeholders.
8. Generate reports to management, including monthly performance reports, incident summaries, root cause analyses, and status reports on ongoing projects.

Qualifications:

1. 3+ years of experience in data centre facility management.
2. Experience working in a 24x7 mission-critical environment.
3. Strong knowledge of electrical and mechanical systems in data centres.
4. Experience with fire suppression systems and access control systems.
5. Proficiency in troubleshooting and problem-solving.
6. Excellent communication and interpersonal skills.
7. Must have prior experience working in data centre operations in financial institutions.

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Summary

Responsible for engineering activities in product improvement/engineering projects; performs engineering analysis, equipment and process set up, carry out risk assessments and validations as well as production implementation for completed projects.

Job Responsibilities

• Participate in product improvement/engineering projects, and responsible for engineering activities.
• Take the lead in problem solving and action planning in project management.
• Perform risk analysis (FMEA) to define process flow and control plan.
• Perform equipment qualification and process validation for product improvement/engineering projects.
• Provide technical advice and guidance to junior engineers and other departments.
• ·Ensure projects are implemented in line with the schedule and budget.
• Optimize new/improved process parameters to further improve product quality and the overall equipment effectiveness.
• Explore new process to improve product quality or productivity.
• Be responsible for the successful transfer of new/improved process/methodologies into the production with good process margins and inline controls.
• Involved in hands-on execution of manufacturing operations.
• Provide operational training for operators or related personnel.
• Manage administrative duties as well as ad-hoc projects assigned by immediate superior.

Job Requirements

• Minimum a Bachelor Degree in Mechanical/Industrial/Manufacturing/ Biomedical Engineering related disciplines or equivalent.
• Good mechanical or material aptitude and knowledge.
• Good experience of manufacturing process and cGMP manufacturing.
• Experience of operational management and lean manufacturing.
• Clean room/environment control experience.
• At least 2 years of working experience in the related field.
• Excellent English-speaking & writing skills
• Multi-lingual: Chinese (Mandarin) to liaise with Mandarin speaking counterparts, other languages are an asset
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to write professional reports, business correspondence, and procedure manuals.

Work Location

36 Jalan Tukang

Singapore 619266

Job Description & Requirements

Support daily BAU activities for the agency and new cloud projects.

Assist with reviewing access rights and controlling accounts in the cloud environment.

Identify and resolve vulnerabilities flagged by scans and GCC alerts.

Provide technical consultancy for onboarding new Azure cloud services.

Strengthen and enhance the security of existing cloud infrastructure.

Raise service requests for cloud-related tasks to the BAU Operations Team.

Support and maintain Azure Blob Storage service.

Manage Trend Micro Cloud One Workload and Endpoint Security/AMHIPS as part of the agency’s anti-virus and anti-malware systems.

Support and maintain ABLR Heavy Forwarder for the agency’s audit logging requirements.

Use DevOps tools (e.g., Terraform) to manage the agency’s GCC infrastructure.

Collaborate on audit and security compliance activities.

Work with the BAU team, cloud engineers, system engineers, and DBAs to support and maintain the GCC environment.

Support Central Account Management (CAM) servers for audit purposes.

Participate in disaster recovery exercises.

Job Description: We are seeking a skilled and motivated Network & Security Engineer to join our dynamic team. As a Network & Security Engineer, you will play a critical role in designing, implementing, and maintaining robust network & security infrastructures for our diverse range of clients. You will work collaboratively with other IT professionals to integrate various technologies, ensuring the stability, integrity, and efficient operation of our clients' network & security infrastructure.

Key Responsibilities:

• Design and deploy functional networks (LAN, WAN, WLAN, VLAN) & security (FW, NAC) solutions tailored to client needs
• Configure and install routers, switches, wireless controllers, firewalls and other network devices
• Monitor network performance and integrity, ensuring high availability and reliability
• Troubleshoot and resolve network issues escalated by support teams
• Communicate with clients to understand their requirements and provide technical support
• Maintain comprehensive technical documentation
• Propose and implement improvements to network performance, security, capacity, and scalability
• Participate in project deployments, ensuring seamless integration and implementation of network & security solutions

Requirements:

• 3 to 5 years of experience in the networking field, preferably with a systems integrator
• Hands-on experience with wired and wireless networking deployment
• Aruba Wired or Wireless certification is a must
• Well-versed with the different types of network routing and switching technology.
• Knowledge of wireless technology and products.
• Proven experience as a Network Engineer or in a similar role
• In-depth knowledge of best practices in network management, control, security, and monitoring
• Good experience with firewalls, VPNs, remote implementations, and troubleshooting
• The ability to set up and configure server hardware will be an added advantage
• Excellent organizational, prioritization, and multitasking skills

Contract Type: 12 Months (Renewal)
Salary: SGD4,000 to SGD5,000
Location: MacPherson
Working Hours: Mon – Fri 9 am to 6 pm (onsite)
Commencement: Immediate