Mun Siong Engineering Limited is a market leader in turnkey solutions for the Oil & Gas, Petrochemical, Energy, Pharmaceutical & Power industries for more than half a century.

What we offer

We pride ourselves in championing diversity, inclusion, work-life balance, and harnessing technology for a brighter future. For us, sustainability isn't just a buzzword, but a way of life. We also pride ourselves on being at the forefront of environmental responsibility, integrating eco-friendly equipment and practices into everything.

What you'll be doing

• Perform delivery & despatch duties for the company
• Perform ad-hoc duties as and when required
• Maintaining of company’s vehicle
• Understand and comply with safety requirements
• Perform despatch duties as per schedule
• Daily check of company vehicle & report immediate if there any defects
• Top up of diesel at various sites for MSE equipment’s as per site required
• Coordinate with various sites for diesel top up schedule

We’re looking for

• Someone who possesses a Class 3 driving License

We are looking for Electrical Engineers to expand our team.

Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard.
• Familiar with Class regulation/rules, standards, piping accessaries, equipment.
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project.
• Feedback for profession’s design mode & standard.
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility.
• Attend and report in project and section meeting.
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor.
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead.
• Project Handling- New building project,Repair, Upgrading, Conversion project.

Job Requirement

• Minimum 5 years of relevant work experience in the Machinery / Piping newbuilding design in the Marine/Offshore industry.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

· Perform tasks involved with sourcing, purchasing and expediting of goods and services from suppliers, service provider and contractors.

· Attend daily requests for sourcing of goods and services under his / her portfolio from production and other users.

· Check and ensure purchase requisitions are complete and duly authorized before sending request for quotations (RFQ) to approved supplier and competitive sources

· Liaise with suppliers for quotations / proposals, conducts negotiation with suppliers, co-ordinate technical clarification / work scopes / schedules from suppliers / service providers with users where necessary.

· Prepare commercial bid evaluations for next level approvals for purchase confirmation.

· Raise purchase orders according to establish system and follow up on deliveries.

· Ensure that all data of purchase are accurately entered into the Purchasing System.

· Conduct supplier appraisals.

· Perform additional purchasing related tasks from time to time.

Requirements

· Diploma in Supply Chain, Material Management, Marine Engineering or equivalent.

· Experience: Preferably 2-3 years of experience in procurement or related work.

· Technical Skills: Purchasing Systems like ACCPAC, SAP, E-Procurement and Microsoft Office.

· Interpersonal Skills: Able to interact with internal customers and external vendors with professionalism and integrity

· Have experience in negotiating contractual terms and conditions

• 5 days work
• Transport pick-up and drop-off point provided islandwide
• Mon - Thur: 0800-1715
• Fri: 0800-1630

 -Prepare the vessel sizing and prepare the PV Elite calculation and GA drawings

 -Prepare / Review heat exchanger calculations and drawings and familiar about HTRI and HTFS calculations

 -Size vessels / tanks and check the vessel / tank sizing calculations submitted by vendor per relevant applicable codes and standards

 -Procurement assistance – preparation RFQ’s, technical clarifications, vessel MTO and purchase specifications coordinating with various discipline engineers

 -Preparation of design calculations and preparation of drawings

 -Preparation of estimates during tendering

 -Follow-up with vendors and preparation / summarising technical bid evaluation

 -Liaise with clients, vendors and various agencies in EPC / site environment in Oil & Gas sector

 -Attend client meeting and lead the project for all static equipment / mechanical packages

 -Review of post order vendor documents by internal technical coordination between various disciplines to ensure vendor equipment design in accordance with discipline detail design

 -Make visit to site when necessary for collection of data, attending meeting at site, provide assistance in trouble shooting / construction issues

 -Attend shop inspection and test if required and report the details

 -Work within allocated budget and schedules, report and progress

This role is focused on the automation and orchestration of security processing within the ST Engineering SOC environment. This person will have the opportunity to work on technology and processes with a global reach and is an integral part of the security controls that the company uses to protect its data and intellectual property.

To be successful, you will need to demonstrate you have the skills and aptitude to understand and support our complex systems and processes that enable the delivery of our world-class services. This position also requires the ability to: work with a variety of different groups; communicate effectively electronically and in person, drive a problem to resolution or know when to escalate and seek assistance; work independently and as part of a team; also requires a keen attention to detail and follow through on work items.

Responsibilities:

• Proactive and creative creation of automated workflow to reduce manual processes and to meet client requirements.
• Updating playbook documentation to ensure all creation, updates, and changes are recorded.
• Work closely with the operation team, customer success manager, and threat detection team to ensure that the input and output of the playbook meets the requirements.
• Perform certain amount of scripting to create unique integration or workflow (preferably python).
• Be the Subject Matter Expert (SME) for all issues in relation to automation.
• Identify opportunities to improve processes and/or tools to ensure highest level of quality, including documentation, mentoring and training sessions.
• Assist in any ad-hoc tasks when necessary.

Requirements:

• Experience with SOAR, SIEM and other security product within a SOC environment.
• Knowledge on cyber attack-vectors, security threats and mitigation techniques.
• Possesses relevant professional certifications.
• Ability to deal with the ambiguity associated with working in a fast paced and changing environment.
• Understanding of or exposure to multiple programming languages is a plus.
• Knowledge and/or experience in reverse engineering of software is a plus.
• 1 to 3 years with SOC environment preferred.
• Good knowledge / experience of ITSM process 2-5 years of hands on experience (Knowledge of ServiceNow ITSM / Sec ops module will be an advantage).
• Good knowledge / experience for scripting python with 2-5 years of hand on experience in using python (Knowledge of using Palo Alto XSOAR will be an advantage).
• Possess and has experience in problem solving skill set with good methodology of analysing an issues / problem, finding the root cause and solving the issues/problem.
• Possess a mindset and curiosity on how to automate work flow and improve process within SOC (Candidates with SOC background preferred).
• Possess ability to work in a fast-moving environment with short turnaround time.
• A good team player with keen interest in process flow and prefer automation way of life rather than manual work way of life.
• Requires working after office hours / activation to resolve SOAR issues.

Work Location: Ang Mo Kio

Job Responsibilities

• Be part of the client’s project management team (PMT) to deliver projects involving the deployment of network infrastructure and related systems.
• Work with users on solution architecting, design, implementation and validation.
• Work with users and vendors on project planning, task coordination, risk assessments etc.
• Review project deliverables to ensure completeness and the quality meet the required quality and standard.
• Facilitate routine clearances, meetings and site surveys.

Job Requirements

• At least 2 years of working experience in the Information Technology industry in the areas of network implementation & support.
• Possesses a valid network/system certification (e.g. CCNA, ITIL, etc) or equivalent.
• Working knowledge of DNS, DHCP, NTP configuration, TCP/IP networking.
• Ability to diagnose and resolve simple network access problem and perform network troubleshooting.
• Have experience in performing project management and in liaising with the user and vendor to define business requirements and deliver technical solution.
• Prior working experience in defence organisations or government ministries requiring security clearance is highly preferred.
• Good written and verbal communication skills.

Job Responsibilities:

Perform system administration function for laptops as per company IT and Security policies.

• Mustering of notebooks and PCs
• Administration of portable media
• Administration of scanning devices
• Perform backups
• Laptops and PC disposal
• Running of scripts to ensure laptops and PC's content etc are in accordance with IT & Security policies
• Assist auditors and attend audits on laptops and PC.
• Write procedure and documentation on administering of laptops & PCs
• Diligently keep records/logs of notebooks & PC for audit purposes
• Perform as a backup person for managing of all equipment in store room

Job Requirements:

• 2 years experience in a system administration function for laptops

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

1. Provides administrative support to the Department in implementing and administration of the Company’s HR policies (Recruitment & Selection, Compensation & Benefits, Performance Management, Learning & Development, Talent Management, and Manpower Planning).

2. Assists in preparing Employment Contracts for HR Manager’s approval before submitting to MD’s / GM’s signature.

3. Administers and processes foreign workers’ immigration matters, Work Permit, S Pass and Employment Pass application, renewal and cancellation, foreign workers’ insurance matters, home leave, etc.

4. Assists in the administration of Work Injuries Compensation Act and Retirement and Re-employment Act.

5. Provides administrative assistance in the implementation of Company’s HR policies so that overtime, work on rest days and public holidays are properly implemented.

6. Monitors the utilization and administration of employee benefits e.g. medical, leave, staff insurance and highlights discrepancies to HR Officer / HR Manager for corrective actions.

7. Assists HR Manager in the research to update the Employee Handbook so that it reflects changes in policies government and Company policies.

8. Assists to carry out regular research on changes in MOM advisories on employment matters and updates HR Manager, HODs and Directors.

9. Assists in maintaining and updating employees’ personnel files accurately.

10. Assists in monthly payroll preparation.

Responsibilities:

· Supervise and lead a team of chargehands, workers and sub-contractors to perform on-site hull painting, cleaning, insulation and ‘O’ level task activities

· Assist in manpower and resource scheduling and deployment, daily man hour returns and coordinate in all aspects of site issues

· Update daily manpower deployment record and over time.

· Liaise with owners and paint representative and surveyor on complying with paint specifications and requirements

· Attend the daily VSCC meeting if necessary.

· Obtain entry into confined space permits or any other work permit system.

· Inspect and update the check list.

· Monitor job progress and ensure quality work at targeted schedule.

· Prepare reports on job status and project completion.

· Inspect vessels and ensure proper handling over to customers.

· Liaise and coordinate with other departments on project issues

· Update weekly progress and attend meeting

Requirements:

• NTC in any Engineering or technical fields
• At least 3 years working experience in a shipyard or similar environment
• Knowledge of Blasting and Painting operation
• Understand and able to interpret paint specifications
• Possess man management experience
• Able to make decision, render judgment and take appropriate actions
• Able to work under pressure and respond to changes on short notice

Responsibilities

Assist in preparation of the PTW office container, preparation of padlocks and LOTO tags.

· Assist in ensuring that isolations at site and all required documents which are stated on the permit are in place prior to issuance of permit.

· Assist in maintaining, updating and archiving of training records, assessment results and PTW/LOTO/LUN documents.

· Assist in configuration of e-PTW.

· Attends the daily VSCC meeting. Ensures that ongoing commissioning activities are informed to VSCC chairman and daily commissioning permits records are updated at the VSCC meeting room.

· Ensure Daily endorsement of required Yard permits.

· Carry out site audit to ensure PTW system procedures are adhered.

· Participation in HSE walk-about as required.

· Administer the Permit to Work office

· Assist in the training of e-PTW system to site team.

· Assist in managing and maintaining of LOTO padlocks and keys in the keys cabinets and Lock Out Boxes (LOB).

Assist in preparation of daily PTW & related reports

Shall comply with company / yard safety procedures and safe working practices.

· Familiar with Permit –To-Work system and Lock-Out Tag-Out procedures.

· Ensure that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures.

Preparation of RA and participation in RA meetings as required

Job Description

• Ensure that safety standards are maintained through monitoring of applicable legal legislations WSH Act, EPMA Act, PPS Act, legal requirements, compliance obligations and other requirements
• Assist in the planning and implementation as directed by HSE Manager on safety and health programmes and promotional activities (e.g. inspections, campaigns and competitions) to improve safety and health awareness.
• Establish and maintain a system for incident reporting, investigation and analysis as stipulated in CSM 6.0 of the HSE manual.
• Investigate and report all reportable accidents: internally to relevant persons, and externally to the relevant authorities via Human Resource representatives for I-reporting purposes.
• Deploy Safety personnel to monitor and maintain safety and health, prevent and fight fires, respond to accidents and control environmental pollution.
• Prepare the project Site Safety Management Plan (SSMP) where applicable
• The workplace safety and health officer shall take over the duties in the absence of the HSE Manager and HSE Superintendent.
• Communicate relative or applicable company OHSE practices or standards to external interested parties and (or) respond to distinguished requisitions on HSE Manager confirmation.
• Is responsible in ensuring that the investigation of an incident, accident and near miss are carried out and shall ensure that;

1. A preliminary investigation report and register preventive actions to Management of Change is provided when required, and
2. Emergency Response Programme is carried out.

Job Requirements

• Degree/Diploma in Workplace Safety & Health/Engineering or related discipline
• Minimum 5 years of experience in marine shipyard operations
• Good knowledge in WSH Act and OSHA Regulations nd Procedures
• Good in writing business/technical reporting and presentation skills
• Ensure compliance with all legal and regulatory requirements
• Office located in Jurong area

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

Roles & Responsibilities

Job Description & Requirements

Job Summary:

• Lead EPCI CAPEX cost estimate, associated commercial deliverables and establish basis of estimate
• Explain EPCI CAPEX to Project Manager for his authorization
• Reference cost data analysis and benchmarking data development/ update.

Key Accountabilities

• To have good understanding on the industrial standard cost engineering terminology in order to establish Estimate Methodology Procedure for the proposal
• Lead coordination and interface with technical/ commercial professionals,vendors, subcontractors and client to EPCI CAPEX costing within the time frame
• Develop CAPEX cost estimate and evaluate its estimate reasonably and logically
• Work out commercial deliverables related to CAPEX (e.g. Compensation Form, Basis/ Assumption of CAPEX Estimate,Commercial Qualifications, etc.) to read thru the ITT documents as part of Commercial Bid Proposal
• Develop cashflow projection (cash-in/cash-out) based on Project Schedule, Milestone Payment from client and payment terms by vendors/ subcontractors
• Collect, assort various cost data along with technical information for benchmarking and analyze tendency, correlation, or algorithm in order to develop applicable estimate methodologies
• Define and identify risks in terms of opportunities and threats.
• To have knowledge of risk management process.
• To have good understanding on the concept of risk contingency and allowance.

We are looking for Diesel Engine mechanic full time must willing to hardwork and good knowledge and repair with tipper truck and 14ft lorries,road cutter, combactor and excavator machine servicing and maintance monthly. we looking for atleast 2 years experience and above. With diploma certificate and above.

Job Purpose:

To execute the full spectrum of human resources functions to achieve current organization’s goals and future business strategic initiatives

Educational/Professional Qualification:

Degree/Diploma in any disciplines and/or Professional Diploma in Human Resources Management

Working Experience/Exposure:

• At least 5 years of relevant experience in providing HR administration and support in full spectrum of HR in a fast-paced environment, preferably in MNCs
• Good working knowledge of Singapore Employment Act and local HR practices
• Good knowledge of Government legislations (MOM, CPF and IRAS)
• Effective communication and interpersonal skills and ability to work with all levels
• Tactful, has good EQ (emotional quotient) and AQ (adversity quotient)
• Strong administrative skills
• Ability to organise and work independently
• Attentive to details and reliable
• Independent Solution seeker
• Has sound foundation in HR processes and practices, preferably in Staffing, Compensation and Benefits, Performance Management, Employment Legislation, and Industrial Relations
• Possess integrity, “Can Do” attitude with passion and a global mindset

Job Duties and Responsibilities:

• Provide HR support to HR Manager and HR team
• Provide full range support in HR duties including recruitment and selection, preparation of contract, orientation, employee relations, performance management, training and development, and manpower planning
• Process and generate HR monthly reports
• Attend regular meetings for HR
• Manage timekeeping and attendance, providing necessary documentation to finance and payroll to support payroll functions
• Working with finance to process staff insurance and claims
• WorkDay administration – assisting with staff queries on WorkDay, maintenance of Annual Leave, No pay leave records etc
• Administer industrial attachment, internship programme
• Assist in developing, implementing and reviewing of HR processes and procedures
• Any other HR functions as assigned

Roles & Responsibilities

Job Description & Requirements

Job Summary:

• Lead EPCI CAPEX cost estimate, associated commercial deliverables and establish basis of estimate
• Explain EPCI CAPEX to Project Manager for his authorization
• Reference cost data analysis and benchmarking data development/ update.

Key Accountabilities

• To have good understanding on the industrial standard cost engineering terminology in order to establish Estimate Methodology Procedure for the proposal
• Lead coordination and interface with technical/ commercial professionals,vendors, subcontractors and client to EPCI CAPEX costing within the time frame
• Develop CAPEX cost estimate and evaluate its estimate reasonably and logically
• Work out commercial deliverables related to CAPEX (e.g. Compensation Form, Basis/ Assumption of CAPEX Estimate, Commercial Qualifications, etc.) to read thru the ITT documents as part of Commercial Bid Proposal
• Develop cashflow projection (cash-in/cash-out) based on Project Schedule, Milestone Payment from client and payment terms by vendors/ subcontractors
• Collect, assort various cost data along with technical information for benchmarking and analyze tendency, correlation, or algorithm in order to develop applicable estimate methodologies
• Define and identify risks in terms of opportunities and threats.
• To have knowledge of risk management process.
• To have good understanding on the concept of risk contingency and allowance.

Job Responsibilities:

• coordinate with SWC for the services routing and comply with COP
• coordinate with relevant agencies to ensure the design complying with code & standard
• Review all technical design drawings and calculations to meet client’s specifications and authority compliance.
• To support project sites for the design as and when required.
• To review shop drawings and coordination with various disciplines

Job Requirements

• Minimum 5 years of experience after tertiary education in relevant field in the construction supervision of civil and structural works for projects of similar scale and complexity.
• The Design Coordinator (Civil/Structural)’s role is to ensure that civil and structural works are built in accordance with approved Structural Plans, Architectural Drawings and cast-in SWCs services are provided as per CCSM and Structural Electrical Mechanical Drawings.
• Experience with LTA related project is preferable.

Key Responsibilities and Requirements:

• At least 1 year of Sales experience within the interior construction sector.
• With presentations and time management skills.
• Diploma / certification in any of the following: Architecture, Interior Design, Project/construction management, Marketing Management or related building construction/ M&E studies, Marketing Management.
• Familiar with, electrical, Celling partition work, carpentry, Tilling work, Awning work, renovation works and fit-out works.
• Experience in managing multiple projects.
• Positive, commitment and “can-do” attitude.
• High integrity, good team player, keen desire to learn, contribute, advance and progress with the company.
• Delivering business/Market share in collaboration with Zonal Sales teams for the year/quarter/month
• Salary+Sales Commission+Yearly Bonus
• Responsible to lead development and implementation of key strategic marketing initiatives for Singapore comprising of PQ, CPC, PDA and Bussmann in order to achieve the Sales Revenue growth in Singapore year on year
• Coordinating market analyses with sales team members and defining appropriate forecasts and plans
• Driving sales efficiency by delivering appropriate product knowledge information and training for each salesperson
• All works Monitoring with subcontractor and handover to clients.
• Monitoring Payment

Job Description:

• To support and administer all EHS-related initiatives.
• Conduct daily toolbox meeting / inspection with our own supervisors/workers and subcontractor’s supervisors/workers.
• Conduct daily safety inspection to ensure total compliance to MOM regulations and recommend preventive measures.
• Handle daily site inspections on EHS aspects and ensure compliance with safety standards and government regulations.
• Prepare and review the safety documents (Risk Assessment/Safe Work Procedures and etc).
• To investigate workplace accidents if any, identify causes and recommend corrective measures to prevent recurrence.
• Execute risk management plan for work process and work areas.
• Facilitate or conduct HSE training, including safety induction and orientation
• Other add-hoc EHS duties assigned by the management.

Job Requirement:

• To support and administer all EHS-related initiatives.
• Possess Advance Certificate in Workplace Safety & Health, Risk Management and First Aid certified.
• Possess good knowledge of WSH Act.
• Able to work independently in a fast-paced environment.
• Registered Safety Officer is an added advantage

Nanyang Technological University (NTU) is an internationally renowned tertiary education institution. It boasts a strong engineering college and is ranked among the best globally. Committed to our mission of educating leaders and advancing knowledge for Singapore and beyond, we have built global programs and established strong links with leading institutions around the world.

The School of Civil and Environmental Engineering (CEE), which is under the College of Engineering, aspires to be a leading school for Sustainable Urban Systems. Currently, it has over 50 faculty members and more than 1,500 students, and is rapidly expanding its range of educational and research activities. Its faculty has led major university-wide strategic research thrusts in space creation, water research and sustainable built environment. Moving forward, CEE is addressing critical problems in urban systems such as building structures and energy systems, sustainability of urban cities, and resiliency to natural and unnatural risks.

To fuel further development, we invite applications for an Assistant Professor (Tenure-Track) position in Structural Engineering.

Applicants must have a PhD degree in Civil Engineering or Structural Engineering. Specifically, the applicant must be able to teach mechanics of materials, determinate and indeterminate structural analysis, structural design in either reinforced and precast concrete, and/or steel and composite structures, and tall building structures at both the undergraduate and graduate levels and is expected to enhance the school’s exiting curriculum.

Application Procedures

Applicants are invited to submit their applications (cover letter, detailed CV including publication list, research and teaching statements, citation report, and/or any other documents that demonstrate your qualifications and credentials) through the NTU Workday career portal.

Application remains open until the position is filled. Only short-listed candidates will be notified.

Nanyang Technological University, Singapore (NTU Singapore) is an internationally renowned tertiary education institution. It boasts a strong engineering college and is ranked among the best globally. Committed to our mission of educating leaders and advancing knowledge for Singapore and beyond, we have built global programmes and established strong links with leading institutions around the world.

The School of Civil and Environmental Engineering (CEE), which is under the College of Engineering, aspires to be a leading school for Sustainable Urban Systems. Currently, it has over 50 faculty members and more than 1,500 students, and is rapidly expanding its range of educational and research activities. Its faculty has led major university-wide strategic research thrusts in space creation, water research and sustainable built environment. Moving forward, CEE is addressing critical problems in urban systems such as building structures and energy systems, sustainability of urban cities, and resiliency to natural and unnatural risks.

To fuel further development, we invite applications for an Assistant Professor (Tenure-Track) position in Geotechnical Engineering.

Applicants would need to possess PhD in Civil or Geotechnical Engineering with strong interdisciplinary expertise in areas such as soil mechanics, underground construction, soil improvement, instrumentation, monitoring, numerical analysis, Geoenvironmental engineering, as well as using the latest technologies such as AI, digitalization, data analytics, zero carbon and emerging geomaterials. Applicants who are competent to teach first- and second-year undergraduate basic courses for Civil Engineering such as Mechanics of Materials, Fluid Mechanics, Computing and Mathematics will be considered favourably. Candidates would also need to demonstrate strong and relevant teaching ability and strong communication skills. Applicants with industry experience will have an added advantage.

Application Procedures

Applicants are invited to submit their applications (cover letter, detailed CV including publication list, research and teaching statements, citation report, and/or any other documents that demonstrate your qualifications and credentials) through the NTU Workday career portal.

Application remains open until the position is filled. Only short-listed candidates will be notified.

Nanyang Technological University, Singapore (NTU Singapore) is an internationally renowned tertiary education institution. It boasts a strong engineering college and is ranked among the best globally. Committed to our mission of educating leaders and advancing knowledge for Singapore and beyond, we have built global programmes and established strong links with leading institutions around the world.

Maritime Studies (MS) is a flagship program offered at the School of Civil and Environmental Engineering (CEE) and it aligns with our commitment to strengthen Singapore’s position as a global maritime leader and shipping hub. Currently, MS is offered at both Bachelor and Master degree levels. Moving forward, we are hoping to expand the MS program by introducing more engineering related courses. It will also reinforce our research capabilities related to maritime and shipping.

The joint appointment with School of Mechanical and Aerospace Engineering (MAE) will provide excellent opportunity for collaboration and innovation. It will allow the new faculty member to bring their engineering expertise to the maritime domain which will help to foster interdisciplinary research and education.

To fuel further development, we invite applications for Associate Professor (Tenure-track) position in the following areas of Maritime Studies (with Engineering).

The specific requirements for the position are as follows. Suitable candidates would need to have a PhD degree in the relevant disciplines with expertise in areas such as Maritime Data Analytics, Marine Environment and Energy, Risk Management, Maritime Sustainability, Human Factors in Maritime Applications, Maritime Digitalization, Maritime Technologies, etc. Previous research experience in the above areas will be an advantage. Candidates should also demonstrate strong and relevant teaching ability and have excellent communication skills. In addition, candidates with experience in the industry will have an advantage.

Application Procedure

Applicants are invited to submit their applications (cover letter, detailed CV including publication list, research and teaching statements, citation report, and/or any other documents that demonstrate qualifications and credentials) through the NTU Workday career portal.

Application remains open until the position is filled. Only short-listed candidates will be notified.