- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

• Thoroughly observe SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Investigate quality issues and conduct initial troubleshooting.
• Escalate unresolved problems to the Supervisor and Technology Engineers.
• Manage the dispatch of products to the tool.

Requirements:

• Diploma in engineering or equivalent.
• 2 years of working experience in the related field.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Summary:

Successful candidate will carry out service, maintenance works & projects for security systems at clients’ premises, including but not limited to Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems

and CCTV systems.

Key Roles and Responsibilities:

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during office hours and standby duties after office hours in rotating duty roster
• Liaise closely with client representatives on all service/maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results..
• Familiarize yourself and deliver customer satisfaction base on each client’s business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required

Requirements:

• Min Higher Nitec & Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 2 years working experience.
• Knowledge and hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must.
• Knowledge in IT/Network/Server is an added advantage.
• Good interpersonal and problem solving skills.
• Independent, self-motivated individual whom is able to work under minimum supervision.
• Required to perform standby duties
• Driving License – Preferably if candidate possessesits own vehicle

Job Responsibilities:

• Responsible for managing the QA/QC and Commissioning Teams at site, as well as the equipment Installation, Testing and Commissioning Schedule / Timeline for Electrical and Mechanical systems.
• Responsible for coordinating with vendors during weekly and ad-hoc meetings for energization and Startup presentations to client.
• Ensure that systems are energized and operating as per project specifications and baseline schedule.
• Required understanding of Electrical Single Line Diagram (SLD), Mechanical Piping and Instrumentation Diagram (P&ID).
• Prepare Root Cause Analysis if required.
• Required understanding of Lock-Out, Tag-Out (LOTO) process.
• Attend meetings with client / main contractor / sub-contractors for weekly updates, work progress and scope.
• To communicate with Commissioning Agent directly for technical / issues resolution.

Job Requirements:

• Diploma / Degree in related trades with 3 years experiences. Those with more years of experiences will be considered for senior position.
• Must be a team player, perseverance, diligent, integrity and initiatives.

• Assessing the construction project plans and specifications to determine the types and quantities of materials needed. Collaborating with project managers, engineers, and architects to understand project requirements.
• Identifying and selecting suppliers and vendors based on factors such as cost, quality, and reliability. Negotiating contracts and terms with suppliers to secure favorable pricing and delivery terms.
• Developing cost estimates for materials and ensuring adherence to project budgets.Monitoring and controlling material costs to avoid budget overruns.
• Maintaining accurate records of material inventory levels and tracking consumption. Implementing efficient inventory management practices to minimize waste and prevent shortages.
• Placing orders for materials and equipment in a timely manner to meet project timelines. Monitoring and tracking the status of orders to ensure on-time delivery.
• Ensuring that materials meet specified quality standards and regulatory requirements. Collaborating with quality control teams to address any issues related to material quality.
• Communicating effectively with various stakeholders, including project managers, suppliers, and construction teams.Coordinating with different departments to ensure a smooth flow of materials to the construction site.
• Resolving issues related to material shortages, delays, or quality concerns. Implementing contingency plans to address unexpected challenges in the supply chain.
• Maintaining detailed records of material transactions, orders, and deliveries. Generating reports on material usage, costs, and inventory levels for project management.
• Identifying opportunities for process improvement in material planning and procurement. Staying updated on industry trends and best practices to enhance efficiency and effectiveness.
  

Job responsibilities:

• Manage end-to-end staff and workers’ training courses from liaising with internal staff to Training Vendor, course registration and confirmation, and post-training evaluation to training records and certification renewal.
• Assist in updating and maintaining internal T&D policies, SOPs, flow charts, training calender and training materials in good order and timely manner.
• Manage and update training administration, staff records, training budget and resources.
• Assist in follow-up and updating performance management data and reports.
• Assist in follow-up on mentorship and staff career planning progression, activities and communication.
• Coordinate and conduct HR events, meetings and staff engagement activities.
• Assist in reviewing and analysing training reports and feedback for improvements and action plans.
• Acts as an active team player/leader in the HR team for organizing/roll-out department activities which are not limited to training and development, HRIS, people communications, HR administration and projects, etc.

Requirements:

• Diploma or Degree in any field of study.
• With ACTA or ACLP cert is an advantage.
• At least 2 years of working experience, prior experience in training administration or similar role is an advantage.
• Responsible, quick learner, detail-oriented, self-motivated and team player.
• Good command of English and Chinese as will be facilitated training and meeting in both languages.

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

uties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

uties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

• Industry : Manufacturing
• Location : East
• Working Hours : 9am to 6pm
• Salary Range : Up to S$7,000 Per month

Responsibilities:

• Supervise and lead engineers and technicians, who work on continuous improvement program, design machinery, plan and develop projects, and oversee production and quality control.
• Lead and actively contribute to the mechanical and automation development of machinery, equipment, and automation systems.
• Supervise the mechanical and process teams, providing guidance in managing the entire development life cycle from development, budgeting, deployment, and execution of projects.
• Provide technical support and guidance to project leads and stakeholders.

Requirements:

• Min Degree in engineering or equivalent
• Relevant experience in manufacturing industry
• Experience in PLC Programming
• Strong leadership and collaborative management skills
• Able to work in fast paced environment
• Effective team player, communicator and team builder

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9740

http://www.peopleprofilers.com

EA License Number: 02C4944
Registration Number: R1330005
Posting Personnel: Reeve Lim Kok Kiong

• Communicating with clients to better understand financial needs and report that information to the Accountant
• Managing basic office administrative tasks including filing, printing, reporting and emailing
• Recording and processing all financial and accounting practices, including profit and loss reports
• Working closely with accounting or financial professional to manage client’s records
• Maintaining bookkeeping and office accounting needs
• Collecting payments and updating accounts payable and receivable records
• Scheduling client appointments and managing important department deadlines

1.) Drafting of memo/email/letter

2.) Preparation of monthly expenses report

3.) Daily administrative work (Operation)

4.) Invoice data entry and preparation of varies monthly reports

5.) General administrative task and filing

6.) Fleeting management

7.) Issue Purchase order

8.) Assist to source for material

9.) Safety equipment maintenance

10.) Equipment calibration maintenance

Job Description:

• Prepare and Monitor project cost budget, cash-flow for project, track changes in design/construction work, check variations and adjust budget projections accordingly.
• Source and Liaise with Site Personnel, Suppliers, Sub-contractors, Consultants and/or Architects for all project-related matters.
• Responsible for Progress Claims, Variation Orders, Final Accounts and Sub-contractor Progress Claims.
• Work closely with the project team in the Analysis, Evaluation and Negotiation of quotations, so as to ensure timely award of sub-contractors and suppliers.
• Ensure timely finalization of main contracts and sub-contracts.
• Provide Support in any other ad-hoc duties that may be assigned time to time.

Job Requirements:

• Candidate must possess at least a Bachelor’s Degree/ Post-Graduate Diploma/ Professional Degree in Engineering (Civil), Quantity Surveying or Facilities/ Building-related with a minimum of 3 years of relevant work experience.
• Have a positive working attitude, pro-active and meticulous in his/her work.
• Posses strong inter-personal communication & negotiation skills; able to work as a team.
• Able to work under pressure and meet tight deadlines, either independently or in a team environment.

.Job Description

• To carry out maintenance and repair to ensure equipment are in good working conditions and quality
• Maintaining of records and repair activities
• Basic plumbing installation knowledge
• Perform other tasks as assigned by the Management

Job Requirement

• Candidates without experience but possess the right attitude will be considered
• Possess Class 3 licence
• Able to work independently
• Responsible and able to work in a team
• Good interpersonal
• Plumbing knowledge will be an advantage

Job Responsibilities:

· Establish BIM implementation strategy, requirements, process, workflow and needs for construction projects.

· Optimise design and downstream construction processes through the implementation of BIM and VDC concepts beyond 3-D modelling and conflict resolution.

· Plan, manage and maintain the 3-D BIM data and complexity of content to meet project deliverable requirements.

· Embrace a holistic approach and strategically plan for BIM execution in green building projects.

· Manage all drawings (e.g. Shop drawings, Layout Plans drawings and As-Built drawings) with all respective trades (e.g. Architectural, Structural, MEP and Specialist Sub-contractors works), as well as to resolve all design issues and de-conflict clashes in BIM drawings.

· Lead and support the projects’ BIM Team(s) including managing of sub-contractors’ BIM Team(s).

· Attend and chair design technical meetings with Clients, Consultants and Sub-contractors.

· Engage project teams to innovate and leverage advanced tools to solve project problems.

· Assist the QS department in variation order claims related to design changes.

· Develop a training program for design managers and engineers to improve the use of BIM authoring tools.

• Any other duties that may be assigned.

Requirements:

• Degree / Master in Architecture / Engineering / Construction or relevant field.
• Minimum 10 years of local working experience in the related field with at least 6 years of hands-on experience in handling BIM projects.
• Trained and proficient in AutoCAD, Revit / BIM software in Architectural / Structural / MEP and other visualization and simulation applications.
• Experience in implementing the BIM adoption of design authoring and collaboration technology tools in construction projects.
• Good understanding of the Singapore Construction Industry regulations (e.g. Building code, BCA, URA and LTA).
• Experience in leading a BIM Team in Shop drawing production, coordination and document control.
• A positive team leader with good judgment, prompt decision-making abilities and ability to meet tight deadlines.
• Solid organizational skills including attention to detail and multi-tasking skills.
• Excellent written and verbal communication skills.
• Candidate with knowledge in Specialist trade works (e.g. Curtainwall, Stone and Interior Design works) will be an added advantage.

CLASS 4 VACUUM TANKER DRIVER CUM ASSISTANT FOR DESILTING OF WASTE TANKS AND PORTABLE TOILETS AT DIFFERENT LOCATIONS IN SINGAPORE. ABLE TO TAKE CARE OF OWN VEHICLE. 6 DAYS WEEK. ABLE TO WORK OVERTIME, PUBLIC HOLIDAYS AND SUNDAYS. BASIC SALARY $2000 PLUS INCENTIVE SCHEME. OFFICE LOCATED AT TAGORE INDUSTRIAL AVENUE.

Job Description:

- To assist in all Engineering Department personnel with admin support.

- To assist in submission on technical clarifications and method statements.

- To assist in coordination with vendors / sub-contractors.

- To coordinate with project coordination team members, vendors and subcontractors.

- To coordinate with document controller on design deliverables transaction to ensure smooth flow of

documents.

- To coordinate with other discipline engineers, project manager’s to prepare and generate monthly

progress report.

- To coordination and communication between HQ and Site Office.

- May need to go site office to provide admin support.

- To provide administrative support for Project Manager and discipline department heads.

Job Requirements:

- Minimum Diploma in Administration or equivalent.

- Minimum 1 year of relevant experience in construction industry.

- Having working experience in Changi Airport project will be an added advantage.

- Able to work independently.

- Good communication skills.

- Able to commence work immediately or short notice.

uties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure