Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Responsibilities:

Payroll:

• Manage payroll processing and administration, ensuring compliance with relevant regulations and company policies
• Collaborate with other departments/functions to ensure accurate and timely processing of payroll data
• Develop and maintain payroll procedures, calculation formulas and policies, ensuring accuracy, minimizing risk, and improving efficiency of processes
• Maintain accurate payroll records and ensure data integrity and confidentiality
• Be accountable for internal and external payroll audits
• Monitor and report on payroll-related expenses, including salaries, benefits, and taxes
• Collaborate with other functions to ensure the accuracy of employee salary data and assist in troubleshooting payroll system issues
• Stay up-to-date with changes in payroll regulations and best practices, and implement changes as necessary
• Responsible for statutory and ad-hoc surveys submission pertaining to payroll

Mobility:

• Review, record and consolidate Mobility policy and process as necessary to align with organization, business and talent needs, review and streamline processes to ensure smoother flow of operations with regards to movement of talent between countries and HQ
• Support assignees on general queries and support other functions for reports and information in the regional mobility space
• Provide excellent customer experience to all outbound employees, relating to mobility activities
• Ensure proper documentation for all stages of assignment and for audit purposes
• Work closely with HR team to provide support or information related to mobility

Requirement:

• Diploma or bachelor’s degree in human resource, accounting, finance, or related field
• Minimum 2 years of experience in payroll management, with experience managing payroll
• Strong knowledge of Employment-related/labour laws and regulations, payroll regulations and compliance requirements
• Strong organizational and analytical skills, with ability to manage multiple priorities and meet deadlines
• Proficiency in payroll software and Microsoft 365 applications
• High level of attention to detail and commitment to data accuracy and integrity

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

• Prepare cost estimates, budgets, P&L for construction projects.
• Monitor project costs and track variations to ensure the project stays within budget.
• Conduct site measurements and valuations for interim payments and final accounts.
• Prepare progress claim
• Monitor project progress and prepare for any variation order(s) during project period
• Assist in contract administration, including reviewing contracts and managing claims.
• Provide admin support to site team
• Other adhoc task assigned

Requirement:

• Bachelor’s degree in Quantity Surveying, Construction Management, Civil Engineering, or a related field.
• At least 1 year of experience
• Ability to work independently and willingness to work uner pressure.
• Positive working attitude and good communication skills.
• Preferbly with RC experience

Location: North

Responsibilities:

• Maintain current on EV charging and related developments in the industry
• Advise on emerging trends (e.g. battery swapping, etc.) and how it can shift operation strategy
• Provide recommendations to developing mitigation measures (e.g. dynamic electrical load measuring and management, etc.) for implementation
• Support and provide site assessment of potential costs to upgrade electrical infrastructure to support EV charger deployment
• Develop tender specifications and requirements for electrical infrastructure upgrade
• Provide specialist advice on potential electrical-related issues in the infrastructure upgrade proposal and recommend solutions to optimize upgrade projects on cost and time
• Maintain compensation and performance management systems to retain quality manpower and exit poor performers

Requirements:

• Degree in Electrical Engineering
• Minimum 3 years of working experience

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Project contract based (start from 29 Jan 2024, estimated 27 months until project completion)

Construction Manager

Work Location: Changi Naval Base

Working days: 6 days 8am to 5pm, Alternate Saturday Full day

Salary: $7000 to $9000 (depends on experience)

Requirement:

Master or Degree in Engineering or equivalent, recognized universities under the BCA is a plus

Minimum 5 years of Experience in Construction Experience. A field in marine construction company is favourable.

Proficient in Microsoft Office, MS Project, Primavera, and AutoCAD

Job Description

Overall Responsibility for all construction activities with respect to performance, procedure, and making recommendations to project managers for improvements and corrective actions.

Manage Contractors with a focus on quality, compliance with engineering drawings, applicable code and standards, and construction schedule and cost.

Interface and Coordinate with Engineering supporting construction activities.

Assist in developing and implementing corporate construction policies that support project construction.

Oversee the effective management of project activities to assure timely delivery and low wastage.

Manage and lead a group of engineers.

Co-ordination with other departments on issues affecting project works.

Liaise with government/Statutory Authorities, consultants, clients, suppliers etc.

Provide Timely Project Progress reporting to management and Attending Project Execution Meetings with other managers.

Select, guide, and develop a multicultural labour force & Management team with construction responsibilities to ensure that the organization achieves it business objectives and complies with all relevant regulations and laws.

Ensuring Quality Assurance and ISO Standards are met on all construction related activities and ensure customer quality specifications are constantly met.

Allocate Capital and Human Resources to maximize productivity.

Other Ad-hoc Duties required to carry out

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About NUS IT

NUS Information Technology is the cornerstone to providing reliable, high-performance and secure IT solutions and effective IT governance for the campus. Here at NUS IT, we aim to transform NUS into a borderless computing community providing knowledge at its fingertips by enhancing the use of effective applications and services for teaching and learning.

We drive a culture that is forward-looking. With a strong passion for IT, our people are always striving to improve, push boundaries and innovate with a "can-do" attitude. We embrace collaboration, open communication and knowledge sharing. If you see yourself thriving in a dynamic environment and breaking new grounds with innovative ideas, you will find yourself at home in NUS IT.

As part of our team, you can look forward an empowered work environment that allows you to take charge of your own career path. We provide competitive remuneration as well as flexible work arrangements to enable your growth and development. We pride ourselves on our diverse workforce and are committed to transforming NUS into a leading global University shaping the future.

https://nusit.nus.edu.sg/

Job Description

We are seeking an experienced Data Engineering Lead to oversee the data engineering team in NUS.

The role will be responsible for leading and guiding teams in the development of high-quality data lakehouse, ensuring they meet business needs and align with NUS strategic goals. The role will also ensure the proper implementation across all stages of the data lifecycle

This role will manage a team of 6 data engineers handling ELT/ETL framework and end-to-end data pipelines from various source systems to data lakehouse with a plan for future growth.

This is a hands-on leadership role and the candidate should have been on active hands-on development at least 5 years prior.

Duties and Responsibilities

Technical Expertise
• Participate in the technical design of data platforms and their technologies, including their framework, architecture, standards, and guidelines.
• Provide technical guidance and expertise to the team, helping to solve complex technical challenges.
• Stay updated about emerging technologies and industry trends to drive innovation within our organization.
• Ensure adherence to best practices in design, development, testing, and maintenance.
Leadership and Team Management
• Lead and mentor the team, fostering a culture of innovation, collaboration, and excellence.
• Provide direction and guidance to the team in managing the full data lifecycle.
• Perform Scrum Master role for the team.
• Develop and implement strategies to enhance team’s performance and productivity.
• Foster collaboration and high-performance culture within the team.
Delivery Management
• Ensure timely and high-quality delivery, aligning with project objectives, scope, and timelines.
• Oversee the design and implementation of data lakehouse to meet the university’s needs.
Quality Assurance
• Implement quality control and testing procedures to guarantee the high-quality delivery.
• Ensure data lakehouse aligns with the university's regulatory and compliance requirements.

Qualifications

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Minimum of 7 years of experience in technical leadership roles, with a strong emphasis on data lakehouse and data engineering solutions.
• Proven ability to lead data engineering teams, promoting collaboration and achieving project objectives.
• Strong problem-solving and critical-thinking skills, with a proven track record of effectively addressing technical challenges and risk mitigation.
• Strong knowledge of quality assurance processes, encompassing testing methodologies, and quality control procedures.
• Relevant experience in designing, developing, and supporting data lakehouse and data engineering solutions.
• Strong verbal, written and interpersonal communication skills with the ability to interact and communicate effectively with all levels of management, users, and vendors.
• Must be a good team player, proactive in nature, fast learner, highly organized and go-getter attitude with can-do spirit.

Technical Expertise
• Strong working experience in end-to-end development of data lakes and data warehouses, preferably with experience in Informatica.
• Strong working experience in Azure Data services, preferably Azure Fabric.
• Strong database working experience for transactional and analytics systems, including querying and tuning large, complex data sets and performance analysis.
• Working experience in big data and DataSecOps is an added advantage.

Are you ready to ignite your career and be part of something truly extraordinary? At ASUS, we’re In Search of Incredible—and we want you on our team! We’re looking for dynamic, passionate individuals who are eager to innovate, create, and make waves in the tech world. If you’re fueled by ambition and thrive in a fast-paced environment where your ideas can shape the future, this is your opportunity to shine.

Join us, and let’s chase the incredible together!

AICS is a division of ASUS, with the mission to transform healthcare through AI & SaaS. Utilizing deep technologies in Natural Language Processing, Computer Vision, Machine Learning (ML), and Data Analytics, we build and deploy secured solutions that improve the quality of care, increase accessibility, and reduce costs. We have deployed our solutions in over 20 hospitals in Taiwan and plan to expand our services in Singapore and the region.

The Responsibilities:

• Hands-on technical leadership and management of day-to-day activities of the ML engineering team within an Agile/Scrum environment.
• Build and grow a best-in-class engineering team.
• Work closely with the engineers to architect and develop the best ML solutions on the public cloud, including models, pipelines, performance optimization, testing, and deployment.
• Collaborate across engineering and product teams to translate business needs into ML specifications and deliverables.
• Work with an entrepreneurial team of experienced AI researchers and software engineers to successfully ship software products and continue to grow our business.
• Report on the status of development, quality, operations, and system performance to management.
• Management of departmental resources, staffing, and mentoring.

The Requirements:

• Bachelor’s and/or Master’s degree in Computer Science, Computer Engineering, Electric Engineering.
• 8+ years of building successful machine learning software solutions.
• 3+ years of experience managing ML and software engineers.
• Strong machine learning and deep learning fundamentals.
• Proficiency in developing and deploying ML solutions on Azure or other public cloud providers.
• Understanding of best practices in MLOps and software development processes including coding standards, code reviews, data and model pipelines, source control (Github), and test automation/CICD

Key Responsibilities

* Design and analyze cabin interior and mechanical components in support of aircraft interior modification projects.

* Develop drawings (e.g. LOPA, installation drawings, production drawings, etc), work instructions, procedures and recommendations.

* Develop engineering substantiation reports (e.g. Weight & Balance, Structural, Flammability reports) and Engineering Authorizations (EAs).

* Coordinate with FAA DERs and DARs, EASA CVEs and/or local civil aviation authorities for any necessary assistance and/or approvals.

* Support interior and mechanical aspects of proposal development, customer and supplier meetings including onsite modification technical support.

* Other duties as assigned.

* Temporary assignment travel of up to 3 months in the US and other countries in Asia is required.

REQUIREMENTS

- Bachelor Degree in Engineering (Aerospace or Mechanical Engineering); Experience in related commercial aircraft field either in cabin interior design or technical services would be an added advantage.

- Able to research and analyze Boeing or Airbus documents (e.g. SRM, IPC, AMM, etc.) as well as Original Equipment Manufacturer (OEM) documents (e.g. Service Bulletins, CMM, etc.).

- Able to create engineering installation and assembly drawings using CATIA V5 or INVENTOR and AutoCAD. The candidate should already understand standard engineering drawing convention such as ASME Y14.5.

- Knowledge of aircraft seating, interior components (e.g. carpets, curtains, galleys, partitions, floor and ceiling structures, etc) and décor materials.

- Knowledge of aircraft structures analysis using both Classical and FEA Methods and ability to use FEA software such as ANSYS/NASTRAN an added advantage.

- Knowledge of FAA CFR 14 Part 25 and equivalent EASA CS Regulations.

- Candidates with at least 3 to 5 years of relevant experience will be considered.

Note: Certain AAR job assignments or facilities may require proof of US Citizenship and the ability to qualify for, and maintain, applicable US Defense Security Service Clearances.

Please email your resume to [email protected] or send it to 7 Changi Business Park Vista, #03-01 SooKee HQ, Singapore 486042 and attention it to the Managing Director of AAR Engineering Services – Asia.

Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.

Required language(s): Preferably English and Mandarin spoken.

At least 6 Year(s) of working experience in the related field is required for this position.

Preferably specialist in Engineering - Electrical or equivalent.

Must have knowledge in Instruments and Electrical System for Process Control Environment

Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants

2) Troubleshooting and problem solving for field Instruments

3) Calibration and commissioning of field Instruments

4) Electrical equipment troubleshooting and general maintenance for the process plant

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

Major job scope includes but not limited to:

• Responsible for new product development from electronic circuity design to final power module packaging and its application
• Responsible on supporting NPI test development from small volume sample up to production release
• Define test schematics, design/optimize test loadboards, create test plans and optimize test methodologies
• Hands on experience on Design For Testability (DFT) from IC design techniques and testability features to a hardware product design
• Responsible for new product characterization and product datasheet
• Work with design and application engineers in defining and developing test methodologies, test plans, test modes and DFT meeting to product datasheet
• Experience in data analysis using industry-standard software/tools for product characterization, electrical and temperature simulation, 6-sigma analysis and etc
• To support Customers specific application characterization request and helping resolving customer application problem
• Responsible to coordinate and actively participate in Product/Process DFMEA, ensuring success in engineering build for New Product Introduction (NPI), including formulating all product engineering documentation and sustain the product until mass production
• Other duties as assigned by supervisor

Job Requirements:

• Bachelor’s degree in Microelectronics, Electrical/Electronic Engineering or any related course and experience
• Minimum 5 years working experience on High Power Semiconductor Product Development
• Excellent oral and written skills in English and Chinese
• With relevant work experience on Product characterization equipment and bench testing tools
• Possess expertise in C++, Visual Basic programming, SmartTest 7.x.x/8.x.x & debug techniques
• Strong communication skills, effectively communicating technical concept and work collaboratively
• Good understanding on Semiconductor Power Module manufacturing and Technical Know-How
• Good understanding on Automotive product testing and expectation
• Ability to work effectively and efficiently with diverse teams, customers, as well as internal and external partners.
• To be based in Singapore and required frequent travel to China

Guidelines for Applicants:

• You may apply thru Mycareers Future or email to [email protected]

Logistic Officer

Work Location: Changi Naval Base, Project Office at Geylang area

Working days: 5.5 days 8am to 5pm, Alt Sat Full Day

Salary: $2500 to $3500 (depends on experience)

Requirements

Candidates possess at least a Diploma in Logistics/Supply Chain Management/Construction management/ Transportations or equivalent.

At least 2 years of fleet management or transportation management experiences, preferably from construction/civil engineering industry.

Job scope

Tracking and submission of documentation related to material movement (P.O / D.O).

Update reports on inventory and highlight any discrepancies.

Verify purchases and storage of inventory.

Facilitate enquiries with regards to office, equipment and inventory.

Allocate and direct manpower according to fleet schedule.

Submission and approval of personnel for clearance matters.

Generation and verification of temporary passes.

Ensure timely and accurate submissions of various documents.

Any other ad-hoc tasks as instructed by Logistics Manager.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

1. Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.
2. Required language(s): Preferably English and Mandarin spoken.
3. At least 6 Year(s) of working experience in the related field is required for this position.
4. Preferably specialist in Engineering - Electrical or equivalent.
5. Must have knowledge in Instruments and Electrical System for Process Control Environment
6. Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants.

2) Troubleshooting and problem solving for field Instruments.

3) Calibration and commissioning of field Instruments.

4) Electrical equipment troubleshooting and general maintenance for the process plant.

Responsibilites:

• Overseeing and developing marketing campaigns for the company;
• Conducting research and analysing data to identify and define the competition;
• Produce written and multimedia content for advertising;
• Devising and presenting ideas and strategies to the clients; Operate and maintain websites and media accounts including data analytics;
• Compiling and distributing financial and statistical information;
• Writing and proofreading creative copy;
• Organising events and exhibitions as well as presentations;
• Coordinating internal marketing and an organisation’s culture;
• Support the Marketing and Tender Department by assisting with Prequalification support and back up assistance as needed.

Requirements:

• Familiarity with and knowledge of digital and marketing methods;
• Good teamwork skills, communication skills and networking ability;
• Adaptability and a strong attention to detail;
• Good organisation and planning skills;
• Creativity and writing skills;
• Commercial awareness;
• Strong Numerical and IT skills.

Duties:

- Planning and execution of project plans at construction site

- Execute project plan and ensure works completed as per schedule and in accordance to contract specification and design drawing

- Ensure construction site fulfill authority's code of practice and comply with safety house rules.

- Handle correspondence job paperwork and submission

- Liaise with all parties involved in the project including authorities, consultants, clients, subcontractors and suppliers

- Attend site meetings and inspections, report regularly on progress and monitor schedule

- Prepare and monitor work schedules, project costing, procurement, and coordination with all partied involved to ensure work progress smoothly and completed within target time and budget

- Supervise and report progress of the work to Project Manager

- Ensuring project progress are on schedule and to meet the timeline given

- Make sure having the latest construction drawings on-site and work is constructed as per drawing given.

- Update drawing if there is any revision and to keep a updates copy in site office and head office

- Feedback to Project Manager on any issue encounter on site and proposed feasible solution.

- Any other adhoc duties assigned by Project Manager

Responsibilities:

• Responsible for managing projects, preventive maintenance, breakdown maintenance and daily operations activities biomedical engineering team
• Performs duties for a broad scope and complexity of biomedical system relating to preventive maintenance and breakdown maintenance
• Ensuring patient safety and safe usage of biomedical system through proper maintenance, testing and calibration
• Assess, manage, maintain relevant documents to ensure compliance to Medical Devices and Operational Technology Security requirements
• Support department continuous improvement efforts by leading or facilitating relevant improvement projects

Requirements:

• Degree in Biomedical Engineering with minimum 7 years’ experience in similar capacity

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Job Responsibility:

• Design Management: Oversee architectural design processes to ensure compliance with project requirements and timelines.
  Coordinate with stakeholders, including clients, consultants, and contractors, for design approval and revisions.
  Manage the integration of architectural designs with other disciplines such as MEP and structural engineering.
  
• Project Coordination: Lead the architectural team in planning and executing project deliverables.
  Ensure project adherence to local building codes, regulations, and safety standards.
  Monitor design changes and manage their impact on cost, time, and quality.
  
• Team Leadership: Supervise, mentor, and evaluate the performance of junior architects and design staff.
  Provide technical guidance and foster professional development within the team.
  
• Quality Assurance: Conduct regular reviews of design deliverables to maintain high standards.
  Implement and oversee quality control measures for all architectural outputs.
  
• Client & Stakeholder Engagement: Present architectural proposals and reports to clients and stakeholders.
  Address client feedback and ensure satisfaction through effective communication and solutions.

Job Responsibility:

• Bachelor’s degree in Architecture; a Master’s degree is an advantage.
• Professional accreditation (e.g., Architect Registration) preferred.
• Minimum 8–10 years of relevant experience, including leadership roles in architectural design and project management.
• Excellent leadership and team management capabilities.
• Strong problem-solving skills and decision-making abilities.
• Effective communication and interpersonal skills for dealing with diverse stakeholders.
  

Responsibilities:

• Assist Site and Project Managers on project execution.
• Liaise with consultant, clients and subcontractors on the progress of Electrical work.
• To liaise with consultant, clients on the design of shop drawing.
• Attend technical and coordination meetings.
• Handle and resolve technical and engineering problems.
• Coordinate and liaise with consultant and client to ensure smooth completion of project.
• Other ad-hoc duties when assigned.

Requirements:

• Minimum qualification - Diploma in Electrical Engineering or its equivalent.
• Minimum 2 years of relevant working experience in Electrical construction field.
• Good knowledge of Electrical specifications & requirements
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines
• Good knowledge of Microsoft word, excel, PowerPoint, AutoCAD

• Electrical and Instrumentation Installation, commissioning and testing.
• Electrical and instrumentation maintenance, troubleshooting, repair and replacement.
• Calibration of instrumentation such as pressure, flow, level, temperature transmitter in process plant.
• Maintenance of switchboards for process plant.
• Carry out preventive/predictive maintenance of plant instrumentation, control and electrical system to ensure high reliability and availability.
• Conduct trouble shooting and locate sources of problems by observing instrument/ electrical devices in operation, listening for problems, using measuring tools and testing instruments for trouble shooting.
• Support project construction and commissioning of plant equipment and systems through active involvement in punch listing and commissioning activities; discuss equipment improvement and modifications with engineers.

Job Description & Requirements

We are hiring for administration clerk.

Required experience:

-> Assist in administrative typing, data entry, printing filling & etc (

-> Keeping track of payment/invoice.

-> Admin job filling, transfer answering and filtering phone call, registered mail and etc

-> Follow up of customer inquiry

Requirements:

-> Candidate must possess at least a Secondary School or “O” Level or diploma.

-> Computer Literate and familiar with Microsoft Excel, Word and Office

-> Effective at prioritizing, organizing and meeting task deadlines

-> Must be meticulous and able to work independently with minimum supervision

-> Keen to learn and possess a positive attitude

-> Able to communicate with Chinese and English language

-> Only for Singaproe Citizen/Permanent Resident to apply

-> Salary based on experienced

· Support Sales Team in orders processing i.e. purchase orders, sales orders, delivery orders etc.

· Assist Sales Team in quotation preparation to customers.

· Process, track and coordinate sample requests with suppliers and customers.

· Process work orders for parts producing in-house.

· Support Sales Team in daily operation to meet monthly sales targets and goals set.

· Perform any other ad-hoc duties as assigned by superior or management.

Requirements:

• Meticulous, organized individual with a positive attitude and willingness to learn.
• Proficient in MS Office applications such as Microsoft Word & Excel.

Position title : Admin Specialist / Administrative

• Location: Woodlands Industrial Park E5
• Working Days: 5.5 days
• Working hours : Mon to Fri (8.30am to 5.30pm) Sat (8.30am to 12.30pm)
• Salary : $2,200 - $2,400

Job Requirements

• At least 1-2 years of clerical admin would be an advantage.
• Proficiency in Microsoft Excel, Outlook and Word etc.
• Proficient in Autocad drafting skills is an advantage.
• Training Provided

Job Scope

• Coordinate with Sales & Marketing Department to prepare quotations.
• Involved in project delivery by receiving clients’ purchase orders, issuing delivery orders and return forms, arranging for equipment testing/ certificates and maintenance; responding to clients’ requests where necessary thereby ensuring smooth operations & maximum client satisfaction.
• Responsible for preparation of delivery orders, progress claims and invoices, and verifying details with clients.
• Responsible for monitoring clients’ payment status, and finalizing project accounts for completed projects.
• Maintain and organize important corporate documents, contracts, and records relating to equipment, operations and corporate compliance documentations.
• Manage and keep records of company’s assets within company’s internal system.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

· Support Sales Team in orders processing i.e. purchase orders, sales orders, delivery orders etc.

· Assist Sales Team in quotation preparation to customers.

· Process, track and coordinate sample requests with suppliers and customers.

· Process work orders for parts producing in-house.

· Monitor delivery dates and times of the suppliers and other relevant department to ensure sales orders are delivered in a timely manner.

· Assist QA department in handling rejects from customers and suppliers to meet customer’s satisfaction.

· Study the forecast demand from customer closely and make purchase orders to suppliers as per required demand to ensure that stock inventory is in control.

· Produce sales reports on a regular basis as per request by Manager

· Train new employees to ensure they understand the job requirements.

· Support Sales Team in daily operation to meet monthly sales targets and goals set.

· Perform any other ad-hoc duties as assigned by superior or management.

Requirements:

• At least a year of related working experience.
• Meticulous, organized individual with a positive attitude and willingness to learn.
• Proficient in MS Office applications such as Microsoft Word & Excel.
• Prior experience in Electronics/ Manufacturing industries is advantageous.

• Carry out inspections of all roads and road-related facilities.
• Report defects picked up during inspections.
• Report immediately to the Supervisor and the Project Manager any incidents or defects posing immediate concern, safety or inconvenience to the public.
• Submit daily reports on the condition of the roads, footpaths & walkways, service roads & footways, and road-related facilities to the Authority.
• Minimum 3 years experience in civil/ structural engineering works or other engineering equivalent.
• Able to recognize and identify defects on the roads, footpaths & walkways, service roads & footways, and road-related facilities.
• Good knowledge of repair methods for defects identified on roads and road related facilities.
• Minimum qualification --- Degree in Civil

Interested candidates, please forward directly the detailed resume in to [email protected]

Please include following information in the resume

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary in Singapore Dollar

3) Expected salary in Singapore Dollar

4) Personal References

Introduction:

Hostmost Group of Companies is a leading Marine Radio Communications and Navigation system service provider. Established in 1989, we have expanded our operations globally, providing reliable services to clients across different regions. With 14 wholly owned offices and depots spanning Asia to North America, we pride ourselves on maintaining a strong global service network. At Hostmost Group, we believe in continuous improvement and invest in staff training to stay ahead of industry trends and requirements. Our group is currently expanding and there will be several vacancies available.

Job Descriptions:

·Assisting the sales team.

·Manage sales enquiries and create quotations.

·Process sales or service orders.

·Process draft billings.

·Any ad hoc duties as assigned

Requirement:

·Diploma & above.

·Knowledge of ERP, SAP, and MICROSOFT BUSINESS CENTRAL will be an advantage.

. 1 year experience

Location:

·Near Pasir Panjang MRT station (SINGAPORE)

Interested candidates who wish to apply for the advertised position, please send full resume with the following details:

1. Reasons for leaving ALL your employment

2. Current & expected salary

We regret that only shortlisted candidates will be notified.

Career Path:

The Sales Assistant, who can prove to learn and progress well can promote to next advanced roles as Sales & Service Coordinator within the 1st year.

Job Types: Full-time, Permanent

Pay: $2,500.00 - $3,000.00 per month

Benefits:

• Dental insurance
• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary
• Performance bonus

Work Location: In person