1. Plan, organise and manage WHS activities within the sites to cultivate good EHS practices.
2. Perform Risk Assessment and draft safework procedures with clients for submission before start of project
3. Conduct induction for new workers on in-house safety regulations
4. Conduct Risk Assessment and safework procedures briefing to the workers
5. Site inspection and conduct safety meeting
6. Report and investigate accidents and incidents at sites
7. Participate in internal audits and review of Safety Management System
8. Maintain HSE controls and process within Company’s policies and government’s regulations
9. Accident investigation and submit I-Report when necessary
10. Develop Emergency Response Plan for audits
11.Prepare forms to be implemented in the workplace such as safety checklist, RA forms etc.
12. Candidate must possess at least a post secondary Diploma with at least 6 years relevant construction project safety experience in singapore
13. must possess professional knowledge in Law and regulations (WSH Act and Environment)

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description & Requirements

Responsibilities :-

• Oversee the overall execution & construction of the ERSS competently &
• Professionally & conversant in the statutory requirements of Building Control Act.
• Co-ordinate and monitor projects
• Ad-hoc duties as assigned by the Superior
• Resolve problems arising at sites and attend site meetings
• Respond to all email correspondence and claim submission within timelines

Requirements :-

• Possess basic Degree in Civil Engineering (with recognized institutions) &
• Construction Safety Course.
• Minimum 5 years in Project Management experience is desired.
• Good command in both written & spoken in English.
• Self-motivated and committed to works.
• 5.5 days week.
• Possess valid Class 3 driving license & own transport is preferred.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description:
As a Project Supervisor for Fire Alarm Projects, you will be responsible for overseeing the successful installation, maintenance, and servicing of fire alarm systems. You will manage the day-to-day operations of fire alarm projects, ensuring they are completed on time, within budget, and in compliance with safety standards and regulations.

Key Responsibilities:

• Supervise and lead a team of technicians and installers during fire alarm projects.
• Plan, coordinate, and schedule fire alarm installation and maintenance work.
• Ensure compliance with all local fire safety regulations, standards, and codes.
• Manage project budgets, timelines, and resources effectively.
• Communicate with clients to provide updates, address concerns, and ensure satisfaction.
• Conduct site inspections and monitor the quality of work to ensure the highest standards.
• Troubleshoot and resolve technical issues as they arise during the project lifecycle.
• Maintain accurate documentation of project progress, inspections, and reporting.

Qualifications:

• Proven experience in supervising fire alarm installation or related projects.
• Strong understanding of fire alarm systems, safety codes, and regulations (e.g., NFPA standards).
• Excellent leadership, organizational, and communication skills.
• Ability to manage multiple projects and teams simultaneously.
• Strong problem-solving skills and attention to detail.
• Previous experience in budgeting and resource allocation is preferred.
• Relevant certifications in fire alarm systems or safety are a plus (e.g., NICET).
• Ability to work in both office and field environments, as needed.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for career advancement and professional development.
• A dynamic, supportive, and collaborative work environment.

How to Apply:
If you are a dedicated and skilled professional with a passion for fire safety and project management, we would love to hear from you! Please submit your resume and cover letter to [email protected]. We are looking forward to having you join our team!

Job Description & Requirements

• Supervise and lead the construction team to lay down construction milestone.
• Manage construction activities, ensuring timely and smooth progress of the operations.
• Responsible for implementing the work plan and attending project meetings
• Resolve design site problems encountered during the construction period.
• Producing site progress report to management.
• Monitor and ensure subcontractors comply with specified requirements.
• Identify and comply with all applicable statutory/ regulatory requirements related to project.
• Coordination and sequencing of works of different subcontractors.
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.
• Respond swiftly to work delays, emergencies and other problems.
• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• At least 10-15 Year(s) of working experience in the related field is required for this position.
• Preferrable 10-15 years of project management experience in the high rise projects and mixed development in building projects
• Required Skill(s): leadership, technical, planning, coordination, multi-task
• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

-Knowledge of CNC machining process

-Proficient in MasterCam/Unigraphic Cam/Autocad applications

-Experience in precision metal machining and fabrication

-Produce machined components via conventional machines/CNC machines

-Able to interpret engineering drawings, carry out related manufacturing processes

-Able to operate Multi Axis machines will be an advantage

-Able to document process summary sheet

Responsibilities

• Must have experience in aluminium & Glass industry work
• Able to work independently with Main Contractor, Architect to resolve site issues
• Prepare tender submission;handle progress claims and progress payment, VO & finalization of accounts
• To attend site meeting whenever is required
• Materials ordering for sites.
• Any ad-hoc duties assign.
• Estimate the overall cost of the project

Requirements:

• Degree in Quantity Surveying
• At least 5 years QS experience in alum windows & doors
• Meticulous,Independent with good communication skills
• Proficient in AutoCAD and Microsoft Office programs (Excel, Word, e.g.)
• Familar with alum profiles
• Able to work under pressure and tight deadline;

Job Description & Requirements

The Corporate Quality Environmental Safety and Health Officer

• Inspect projects and provide advisory role to project team to eliminate potential hazards.

• Advise on risks arising from the workplace or processes at work, suggests measures to stop or tightly control all risks from happening.

• Preventing or lowering health and environmental risks, and improving quality of processes.

• Assisting the Company with ISO Certification involving ISO 9001, ISO 14001 & ISO 45001.

• Assisting projects with Consass Audit every 6 month.

• Conducting Internal Audit to projects to ensure compliance to ISO 9001, ISO 14001 & ISO 45001.

• Conducting Internal GGBS audit & maintaining Company’s GGBS certification

• Maintaining & revising IMS manual, Procedures & Safety, Health, Environment Management System Manual (SHEMS)

• Developing and revising Risk Assessment and Safe work procedures.

• Applying & maintaining BizSafe status of the Company

• Applying for WSH Awards from WSH Council

• Conduct QESH training to projects

• To attend to Client’s and Authority’s (MOM) inspection

• To organize programs related to Total WSH program by WSH Council

• To assist in providing safety related documents for Tender submission.

• Collating monthly safety performance statistics from all projects

• Conduct Monthly QESH meeting to all projects to share the safety performance of all the projects for continual improvement & to include evidences in the yearly MR Meeting.

Roles & Responsibilities

Job Scope:

• Submit plan and execute well-defined sales strategies to achieve targets;
• Develop and maintain good rapport with existing customers;
• Promptly and professionally attend to customers’ enquiries and requests and provide technical advise on both existing and new products or systems;
• Supports sales opportunities through presentations, calling and visiting customers and prospects, needs identification with active follow-ups;
• Ensuring smooth service operation efficiency for customers with sales and operations team
• Investigating and resolving customers’ issues with relevant departments when necessary
• Acquire new customer accounts;
• Assist in preparation of proposals and quotation administration;
• Contribute creative alternative ideas to help maximize sales opportunities;
• Participate in marketing, advertising, promotional and publicity activities in line with corporate and product strategies;
• Gather information on market demand, competition and latest product developments
• Conduct periodic sales forecasts;
• Prepare weekly sales/contact reports.

Requirements:

• Diploma/Degree in Mechanical/Civil Engineering other Engineering related
• 3 to 5 years of Experience
• Possess Class 3 driving license (with own transport preferred)
• Excellent communication, interpersonal and presentation skills;
• Possess an outgoing personality;
• Resourceful, proactive self-starter, positive attitude, performance oriented, able to work independently but also a team player;
• Must be able to read and write fluently in English & Mandarin
• Able to speak Mandarin p

Key Responsibilities:

• Assist in entering purchase invoices and maintaining daily transaction records for completeness.
• Support COA mapping between NAV and Oracle NetSuite.
• Help extract data from individual work orders to verify product costing.
• Perform administrative tasks such as scanning hardcopy invoices, filing, and archiving as needed.

Job Responsibilities:

• Produce shop drawings & as-built drawings using BIM modelling creating & managing BIM model.
• Update and coordinate BIM model throughout the project.
• Perform interference/clash checking within own model and /or against other disciplines.
• To deliver all the drawings on time with accurate.
• All other Drafter related jobs.

Job Requirements:

• Diploma or degree certificate in relevant discipline.
• Minimum of 3 year experience as BIM drafter in Singapore construction is required for this position.
• Candidate with LTA projects drafting experience will be an advant age.
• Must be proficient in BIM, Revit, Auto Cad & MS Office Able to interpret engineering drawings and models.

We are seeking a talented and experienced 4G/5G Solution Engineer / Architect to join our team. As a key member, you will play a crucial role in designing, implementing, optimizing cutting-edge mobile networks. Your expertise in IP networking, 4G/5G core network, and cybersecurity will be instrumental to ensure successful project execution.

Job Overview

Key Responsibilities:

• Working with vendors to design end-to-end 4G/5G core network solution, create architectural blueprints, considering scalability, reliability, and security.
• Deploy and integrate telco network components in a virtualized environment.
• Collaborate with vendors/partner to customize solutions and
• troubleshoot issues.
• Experience with network virtualization, NFV (VMware or relevant hypervisor) and cloud native architectures.
• Develop end-to-end solutions for specific use cases (e.g., IoT, industrial automation).

IP Networking:

• Implement routing protocols (BGP, OSPF, MPLS) and ensure efficient data flow.
• Configure and troubleshoot IP routers, switches, and firewalls.

Cybersecurity:

• Assess network vulnerabilities and implement security measures.
• Monitor for threats, conduct risk assessments, and recommend mitigation strategies.
• Collaborate with security teams to ensure compliance with industry standards.

Documentation and Training:

• Create technical documentation, including network diagrams and guidelines.
• Conduct training sessions for internal teams and customers.

Qualifications

• Deep understanding of 3G/4G and 5G standards and telecom call flow/processes.
• 7+ years of experience in designing and deploying mobile network solutions, such as 3G, 4G, and 5G technologies.

Relevant certification is a plus:

• CCNA, CCNP, or equivalent for IP networking.
• 4G/5G vendors/products certifications (e.g., 3GPP, 3G/4G/5G certification).
• CISSP or other cybersecurity certifications.
• Excellent problem-solving skills and ability to work in a fast-paced environment.

Work location: Jurong East

We are looking for a dynamic and detail-oriented Project Coordinator to oversee and support electrical projects. The ideal candidate will work closely with project managers and field teams to ensure projects are executed efficiently, on time, and within budget. This role requires excellent organizational skills and a strong understanding of electrical project processes.

Key Responsibilities:

• Support project planning, including scope, timeline, and budget development for electrical projects.
• Coordinate with engineers, technicians, subcontractors, and clients to ensure smooth project execution.
• Monitor progress, track project milestones, and maintain detailed project documentation.
• Assist in the procurement of materials and equipment for electrical installations.
• Ensure compliance with safety standards, regulations, and quality guidelines.
• Schedule and organize project meetings, preparing agendas and recording minutes.
• Identify potential project risks and assist in developing mitigation plans.
• Manage communication between all stakeholders, ensuring transparency and clarity.
• Assist in preparing project reports, invoices, and other required documentation.

Responsibilities:

Able to read architectural drawings & prepare using AutoCAD.

Prepare shop drawings & cutting list.

Experience in aluminium industry

Work closely with our project supervisor to update on site progress.

Min exp 3-4 years

Updating of drawings when necessary other ad-hoc duties

Requirements:

Candidate should have the knowledge of aluminium window/door and extrusion profiles.

Candidate must be able to work independently and in a team.

Candidate must be able to work in a fast-paced environment.

Software knowledge Auto Cad, Microsoft Excel, and Word;

Able to work under pressure and tight deadline

• Develop and implement operational policies and procedures for efficient operations.
• Enhance systems, processes, and best practices.
• Manage day-to-day operations, overseeing the operations team and department.
• Ensure organizational processes comply with legal regulations and standards.
• Uphold health and safety guidelines and enforce compliance.
• Monitor employee and team performance, offering coaching, training, and feedback for improvement.
• Handle budgets, forecasting, and resource allocation to meet strategic goals.
• Collaborate cross-departmentally to align operations with organizational objectives.
• Cultivate and maintain relationships with vendors and suppliers.
• Negotiate contracts for favorable pricing with suppliers and vendors.
• Optimize business travel processes, secure corporate rates, automate expense reports, and ensure compliance.
• Implement quality assurance measures for products/services and monitor production KPIs.
• Enhance customer service quality and satisfaction.
• Analyze data to identify process improvement opportunities and cost savings.
• Manage supply chain processes, including inventory, production, sales, and sourcing.
• Optimize workflows and processes for efficiency and cost-effectiveness.

JOB DESCRIPTION

1. Responsible for overall project progress and ensure project is complete within the specific time, within budget and meet client’s requirement;
2. Liaise with design team on engineering and design issues;
3. Responsible for planning and deployment of resources such as manpower, machinery, equipment and material;
4. Resolve any disputes/clarifications during the execution of project;
5. Ensures settlement of project final accounts at the end of the contract;
6. Prepares and attends project budget presentation and review;
7. Prepares audit reports;
8. Chairs Safety and Health coordination meetings.

REQUIREMENT

1. Diploma in Mechanical Engineering or Equivalent Certificate;

2. At least 3 years of relevant experience in the Marine Industry;

3. Good office coordination skill and interpersonal skill;

4. Independent and resourceful;

5. Good communication skill;

6. Able to handle pressure;

7. Preferably able to understand and read Mandarin.

JOB DESCRIPTION

- To support Operation Manager to initiate, plan, execute, monitor and control for the entire company’s ongoing projects.

- Coordination between departments from QA/QC, Finance, Engineering, Projects, production, logistic, commercial in local and oversea for smooth operation

- Identifying inefficiencies and areas of improvement

- Resource management

- Any additional tasks out of the above assign by the management

QUALIFICATION:

- Degree/diploma in mechanical/electrical

- Previous HVAC/ACMV experience in Marine/ industry/ land preferred

- Fresh graduate with good working attitude and willing to learn sprit are welcome to apply

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

Roles & Responsibilities

1. Implement the organization’s SHMS at office and site to manage risks and prevent accidents.
2. Initiates, review and implement the workplace safety, health and environment programs and initiatives.
3. Enforcement of safety standards in accordance with the Workplace Safety and Health Act and ensure familiarity with any statutory changes or updates.
4. Liaise with MOM and other relevant authorities on WSH-related matters as applicable.
5. Conduct training programs on workplace safety and health and inspections to ensure that all staff and/or subcontractors onsite abide by policies and standards.
6. Lead a team of WSH Co-ordinators to ensure strict compliance of procedures in statutory workplace, safety, health & environment requirements at sites and required premises.
7. Preparation and/or submission of MSRA, safety reports and necessary audits.
8. Assist the company in safety related certifications and awareness such as safety audits, ISO & Bizsafe audits, etc
9. Attend client/consultant safety meetings/weekly coordination meetings & technical meetings.
10. Lead investigation and maintain records for every first aid case, accident and near miss at the work site.
11. Conduct emergency drills periodically.
12. Any other ad hoc duties assigned by management.
13. Must be a Singapore Registered Safety Officer/Workplace Safety & Health Officer with MOM.

Job Description

• Responsible for the company’s organization, management, and marketing

• Responsible for evaluation of company’s current performance and future expansion program

• Responsible to take policy decisions and give directive for company’s growth plans

• Authorizes Quality, Safety and corporate wide policies

• Give directions and key decision regarding the company business which includes operations, business

development, finance, commercial, technical, human resources, etc

• Oversee group business including overseas offices

• Build effective client relationships and expand client base

• Oversee the implementation of internal control to adhere to corporate governance

• Ensure good communication in social and public relations that are presented to relevant stakeholders

• Represent the Company to financial community, major customers, government agencies, shareholders and the

public, as and when required.