Position Summary:

• Responsible to work as a Project Manager. Overall responsibility for the project in all aspects including the overall quality, schedule, cost, HSE and human relations amongst the team members. Major proposals are considered as a specific type of project. The Project Manager is the chief representative of Worley to the Client for information or decision relative to the assigned project.

Technical/Functional Responsibilities:

• Acts as "hands on" manager in a complex network of interrelated activities necessary to move technical and engineering information forward to complete the design, construction and initial operation of the required facilities
• Ensures overall direction and coordination of efforts for major proposals, E/EPC contracts for services or alternatively as a combination of various smaller projects of a similar technology or for the same Client
• Enforces the solution of problems in the following phases of a project
• project development/process design/detailed design/engineering
  design/drafting/procurement/construction/start-up
• Ensures project execution within the HSE, cost, time, quality and technical objectives to which Worley is committed
• Issues HSE instructions to employees working on a construction site and checks the adherence to HSE regulations and instructions, and ensures training of personnel in HSE aspects of their respective duties
• Ensures project execution within the final objectives as determined by Worley’s management
• Ensures project parameters are in line with legal requirements
• Prepares and issues the project execution and quality plan. Issues the project schedule; the approved budgets for services; the approved budgets for equipment (number and basic design) and bulk material quantities if required by the nature of the project
• Is sole representative of Worley towards the Client
• Reviews all Client's requests for changes
• Approves all proposed contract variations (Client changes: on Client's request or identified) before submittal and negotiates payment with Client
• Ensures that required project information flows to him
• Issues instructions for historical filing if required
• Ensures the project release to the Client
• Ensures the compliance with authority requirements
• Responsibilities includes:-
• Meeting Worley’s financial targets as set for the projects under his supervision
• The overall planning, organization, direction, coordination and control of all operations to meet the project objectives
• The (progress) payments and final acceptance by the Client (within the contract conditions and at an optimum cash flow)
• The adherence to the Worley’s organization procedures, the project execution and quality plan and project procedures
• The preparation of the project close-out report according to the Worley’s organization procedure for close-out
• Verifying that contractors, upon contract award, have been instructed with regard to the applicable legal HSE regulations and Client’s requirements
• He has the overall responsibility with respect to HSE matters for a specific project, and delegates specific related activities to his team members
• Review of the HSE performance with the construction manager
• He is responsible for seeing to it that no adverse situations exist in the projects for which he is responsible. He will instruct the project team members accordingly and he will take or initiate the necessary corrective measures

Requirements:

• University engineer in mechanical or chemical engineering, preferably with training in management techniques (or equivalent) or Industrial engineer in mechanical or chemical engineering, preferably with training in management techniques (or equivalent)
• VCA basic HSE training (or equivalent) and VCA leading HSE training (or equivalent)
• 10+ years of experience in engineering & contracting of which 3+ years of experience as a Project Manager with at least a recent EPC contract
• Sound knowledge of project management techniques
• Good understanding of relevant contractual matters
• Sound knowledge of Worley’s procedures
• Working knowledge of the application of computerized systems particularly those to be used for projects
• Broad knowledge of other professional areas within Worley
• Proven ability to communicate
• Proven social skills

Introduction:

Hostmost Group of Companies is a leading Marine Radio Communications and Navigation system service provider. Established in 1989, we have expanded our operations globally, providing reliable services to clients across different regions. With 14 wholly owned offices and depots spanning Asia to North America, we pride ourselves on maintaining a strong global service network. At Hostmost Group, we believe in continuous improvement and invest in staff training to stay ahead of industry trends and requirements. Our group is currently expanding and there will be several vacancies available.

Job Descriptions:

· Manage sales enquires and process quotations.

· Process sales or service orders.

· Process draft billings.

· Meet up with customers.

· Any ad hoc duties as assigned

Requirement:

· Diploma & above.

· Minimum 2 years of sales or admin experience. Commensurate with experience.

· Knowledge of SAP will be an advantage.

· Only Locals (Singaporean or PRs) need to apply.

Location:

· Near Pasir Panjang MRT station (SINGAPORE)

Interested candidates who wish to apply for the advertised position, please send full resume with the following details:

1. Reasons for leaving ALL your employment

2. Current & expected salary

We regret that only shortlisted candidates will be notified.

Job Types: Full-time, Permanent

Benefits:

· Dental insurance

· Health insurance

Schedule:

· Day shift

· Monday to Friday

· Weekend availability

Supplemental pay types:

· 13th month salary

· Performance bonus

Education:

· Local Polytechnic Diploma (Preferred)

Experience:

Sales: 2 years (Preferred

1. To coordinate and manage building construction M&E site works.

2. Ensure all M&E works are performed on time and in compliance with all necessary standards, code of practice and safety regulations.

3. Responsible for the supervision and coordination of M&E works at construction site.

4. Monitor progress, quality of workmanship and compliance.

5. To coordinate M&E wall/floor penetration drawings for approval.

Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Candidates are expected to:-

• Carry out repair, maintenance, and troubleshooting of machinery onboard PSA Marine harbour crafts
• Liaise with Fleet Operations team on breakdown reports and harbour crafts status
• Perform lathe machining, basic gas welding, and cutting works to facilitate repair to machinery
• Assist in lifting activities, forklift operation, confined space assessment
• Perform proper disposal of used oils and chemicals

The ideal candidate should preferably:-

• Possess at least a Nitec in Marine Technology, Electrical Engineering, or Mechanical Engineering
• Be proficient in Microsoft Office applications
• Possess a valid Class 3 driving license and MOM accredited certifications such as SSIC, Safety Supervisor, Lifting Supervisor, Forklift Driving
• Prior experience in performing mechanical fitment, basic gas and TIG welding, hydraulic and pneumatic system troubleshooting will be considered favourably
• Candidates with relevant experience may be considered for a senior position

*New hires may be eligible for a sign-on bonus of up to S$3,000. Terms and conditions apply.

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

Our large-scale Food Science program, ‘Proteins4Singapore,’ funded by Singapore’s National Research Foundation (NRF), is a collaborative effort between the Technical University Munich (TUM), Nanyang Technological University (NTU), the Singapore Institute of Technology (SIT), and A*STAR’s Singapore Institute of Food and Biotechnology Innovation (SIFBI). As part of the Proteins4Singapore team, you will work alongside renowned scientists in plant and food technology, food chemistry, materials science, and business sustainability. Through interdisciplinary collaboration, the program aims to develop state-of-the-art methods and techniques to ensure a sustainable protein supply for highly urbanized environments.

Please visit www.tum-create.edu.sg for more information about TUMCREATE.

Job Summary

We are seeking a highly motivated and skilled Research Fellow to join our dynamic research team focusing on designing, adapting, and implementing cutting-edge mechanical and electronic systems for a decentralized food manufacturing model. As part of the Proteins4Singapore project, this role involves on utilizing simulations and advanced control systems to optimize and ensure quality in novel food textures and forms. This position plays a critical role in advancing sustainable protein solutions for urban environments through interdisciplinary collaboration, drawing expertise from mechanical engineering, mechatronics, and food engineering. This is a 1-year contract with the possibility of extension after the first year.

Key Responsibilities

• Develop a closed-loop control system to synchronize high-moisture extrusion and shape manipulator systems with a seamless integration and quality assurance.
• Integrate a variety of non-invasive sensors for a continuous and active monitoring on a food shape manipulator system.
• Develop and adapt custom firmware to integrate extrusion, in-line monitoring and control system with software protocols.
• Work closely with interdisciplinary teams to combine multiscale structural analysis with food processing methods, such as 3D printing and extrusion, supporting the project’s overarching goals of promoting sustainable food technologies and creating novel approaches for analyzing food texture.
• Engage in collaborative research, data analysis, and interpretation, while contributing to the writing of research papers, reports, and presentations for dissemination at conferences and in peer-reviewed journals.
• Participate in lab meetings, seminars, and collaborative research discussions to align with project goals and objectives.
• Supervise junior group members including undergraduate and doctoral students.

Key Competencies

• Proficient in firmware and software development, with experience in real-time systems, control algorithms, and open-source platforms.
• Strong background of at least 3 years in mechatronics, electronic systems, and automation; ideally experience with CFD, FEM simulations, and rheology for material flow analysis.
• Experience with food processing technologies, particularly food-grade and semi-solid materials, and a focus on safety and user-centric design.
• Publication as key author in related journals.
• Excellent communication skills, both written and verbal, in particular communication of complex scientific concepts to both specialists and non-specialists in a multidisciplinary research environment.
• Proven ability to conduct independent research and collaborate in multidisciplinary teams including working effectively within deadlines.
• Self-motivated and adaptable, with strong problem-solving skills and the ability to thrive in a dynamic, fast-paced research environment.

Qualification Requirements

• Ph.D. in Mechanical Engineering, Mechatronics, Food Processing, Industrial Engineering, or cognate discipline from a reputable university.
• Demonstrated ability in firmware programming and real-time process control integration.
• Strong communication skills, both verbal and written, with the ability to document processes and present findings effectively.

What we offer

• A collaborative and inclusive research environment.
• Access to state-of-the-art laboratory facilities and equipment.
• Opportunities for professional development and career growth.
• Engagement with a leading research team committed to advancing an emerging topic of global relevance.

Applications

Please send your complete application including a cover letter and detailed CV to [email protected].

Only shortlisted candidates will be contacted.

We are looking forward to your application!

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

Objectives of this role

• Planning, coordinating and managing all phases of construction projects, including project initiation, planning, execution, monitoring and closeout.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with client requirements.
• Developing and managing project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Liaising with architects, engineers, contractors and subcontractors to monitor construction progress, resolve issues and ensure compliance with specifications and quality standards.
• Managing procurement processes, including bid evaluations, contract negotiations and vendor selection.
• Oversee project budgeting and cost control and manage change orders to ensure adherence to budgetary constraints.
• Conducting regular site inspections to assess project progress, identify risks, and ensure compliance with safety protocols and regulatory requirements.
• Maintain effective communication with project team members and stakeholders to provide project updates, address concerns and foster strong working relationships.

Your tasks

• Develop comprehensive project plans, including timelines, resource allocations and procurement strategies.
• Coordinate and oversee construction activities, ensuring adherence to project schedules and specifications.
• Evaluate and select contractors and subcontractors based on qualifications, experience and cost-effectiveness.
• Monitor project progress, track key performance indicators (KPIs) and report on project status to stakeholders.
• Ensure compliance with safety regulations and legal requirements, prioritising a safe working environment for all involved.
• Manage construction project documentation, including contracts, permits, drawings and change orders.
• Conduct regular meetings to facilitate communication, address challenges and to meet project objectives.
• Provide regular updates and reports on project status, including milestones, budget updates, and any significant developments or risks.
• Implement and enforce safety protocols and ensure compliance with local building codes and regulations.
• Carry out thorough project evaluations and assessments to identify areas for improvement and implement necessary corrective measures.
• Provide leadership and guidance to the project team, fostering a collaborative and high-performance work environment.

Required skills and qualifications

• A bachelor's degree in civil engineering, construction management, or a related field.
• 2+ years of relevant experience in construction project management, with a track record of successfully delivering projects on time and within budget.
• Excellent project management skills, including effective planning, organising and prioritising tasks.
• Proficiency in reading and interpreting technical documents, including project blueprints and construction schematics.
• Strong leadership and communication skills to manage project teams and stakeholders.
• Proficiency in construction management software, project scheduling tools and cost estimation software.

Preferred skills and qualifications

• Knowledge of risk management and budget management principles.
• Experience in managing large-scale construction projects in India and overseas.
• Knowledge of local construction regulations, permits and approval processes.
• Experience with construction contract negotiations and claims management.
• Knows financial understanding and experience in project budgeting and cost control.

Job Scope:

• Prepare project models and construction documents using BIM software.
• Establish project workflows throughout all project phases.
• BIM project set-up and continued project administration.
• Prepares 2D and 3D shopdrawings and as-built drawings.
• Liaise with Project Document Controller for accurate data transfer.
• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

Requirements:

• Must possess at least Degree/ Diploma in Electrical/ Mechanical/ Civil/ Architectural Engineering with relevant working experience in Construction industry or BIM certificate
• Minimum 2 years working experience in BIM.
• Proficient in BIM, Revit MEP, Bentley,AutoCad and MS Office.
• Able to read and interpret drawings.
• Must be able to work under pressure in fast-paced community with minimum supervision, meeting project deadlines.

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

Job Description

• Attend to customer enquiry on Industrial Automation products
• Work with design team on conceptual design
• Prepare periodical sales report
• Project management support for the entire project cycle
• Work with marketing team to explore new business opportunities

Job Requirement

• Diploma/Degree in any Engineering discipline
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Exposed to Project Management, Industrial Automation and/or Robotic Systems
• Working knowledge of Auto CAD

We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Research Fellow (Postdoc) will conduct experimental and numerical studies in the field of coastal dynamics, including measurements and numerical modelling of turbulent processes in breaking waves, sediment transport, etc. The tasks involve particle image velocimetry (PIV) or particle tracking velocimetry (PTV) measurements of air-water interaction in a shallow water depth, turbulence in the presence of sediment concentrations, turbulence in wave-current interaction, etc. CFD model will be developed and validated with these experiments.

Qualifications

• Possess a PhD degree with research experience.
• Have with relevant background in coastal, ocean, and hydraulic engineering.
• Prior experience and knowledge of hydraulic laboratory experiments (e.g. with PIV/PTV) and numerical modelling (e.g. with DNS) of turbulent flow structures are preferred.
• Applicants must have a PhD degree and research experience.
• Strong written and spoken communications.
• Strong quantitative and analysis skills.
• Prior experience in publishing good publication record is advantageous.
• Open to fixed term contract

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for highly talented and motivated candidates to work on developing new functional materials. Candidate must be able to work in a fast-paced and dynamic environment with researchers across different disciplines. Candidate should have experience in sensing materials or self-healing materials.

Qualifications

PhD degree in Material Sciences, Electrical/Electronics, Applied sciences, basic sciences, technology, mechanical engineering or other relevant fields. Experience with data analytics/AI models a plus.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Electrical and Computer Engineering (ECE) at the National University of Singapore (NUS) is seeking suitable candidates for a Teaching Assistant position.

The job duties include but not limited to:

• Conduct classroom teaching in Electrical/Computer Engineering subjects
• Design and implement Electrical/Computer Engineering laboratory experiments and projects in hardware and/or software domains
• Provide prompt consultation to students
• Assist in grading students’ work
• Assist in course-related logistics for the lecturers
• Assist in Department’s outreach efforts

Interested applicants are invited to submit a detailed CV, a teaching philosophy statement, and transcript for undergraduate studies.

Qualifications

• Good B.Eng./M.Sc./M.Eng. degree in Electrical Engineering, Electronics Engineering or Computer Engineering from a reputable university.
• Strong communication skills in the English language
• Passionate in teaching electrical/computer engineering concepts and skills to the students.
• Proficient in multiple programming languages, especially Python, Java, C.
• Knowledge in software engineering, data structures & algorithms, computer organization, artificial intelligence & machine learning is a plus.

Responsibilities:

• Responsible for upkeep of cleanliness of office, compound, pantry and toilet
• Ensure safety practices and housekeeping are maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Requirement:

• Minimum 1 year of relevant experience
• Basic cleaning skills

• To conduct / plan safety inspection to verify safety provision and provide recommendations for improvements conforming to worksite rules and regulations to comply with statutory requirements
• To investigate any accident, dangerous occurrence or occupational disease that occurred within the workplace and provide recommendations for countermeasures to prevent recurrence
• Implementation and revision of Risk Management
• Liaise with Ministry of Manpower on safety issues and safety statutory requirements
• Establish, update, maintain, and implement the Safety & Health Management System
• To conduct relevant safety training needs e.g. Safety induction, Permit to Work, Safe Work Procedures etc.
• Identify training needs for safety personnel and recommend the required training to ensure competency of the workforce.
• To conduct Safety Committee Meeting to address safety issues and ensure a safe working environment for all personnel
• Ensure in-house rules and regulations are implemented and enforced diligently at the worksite.
• Coordinate safety promotional activities to develop and maintain safety awareness among all personnel
• Evaluate, select and control sub-contractors to ensure awareness of their safety obligations on site
• Review, assess and maintain the Safety Data Sheets
• Ensure storage, movement, use, and disposal of hazardous substances and chemicals are well managed
• Ensure the register of hazardous substances is up to date
• Continuously review the emergency procedure and update.
• Manage and control situations arising during an emergency
• Plan and implement occupational health programs to protect workers from health hazards such as noise, dust, toxic gases, vapors and radiation
• Coordinate safety audit and ensure the closure of all findings
• Coordinate the preparation and submission of all required safety reports e.g. Integrated Management System (IMS) Quarterly report, Risk Assessment review
• Updates on codes of practice & safety literature and circulates information to each level of employees
• Monitor the Safety Performance of the project as set by the company policy and objectives e.g. Accident Frequency Rate (AFR), Accident Severity Rate (ASR) etc
• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999
• Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)Ensure safety practices and housekeeping is to maintained to the highest standard

Requirements:-

• Must possess registered MOM WSH Officer license
• Min 3 years’ WSH Officer experience in Building projects

Responsibilities:

• To review, conduct incident / accident investigation and provide recommendations for countermeasures and to prevent recurrence of accident
• To coordinate of daily toolbox meeting and upkeep the records
• To conduct daily safety inspection and other type of safety inspection as required at work site
• To coordinate the immediate rectification of unsafe conditions and correct any safety malpractices on site
• Monitor and oversee the enforcement of In-house Rule and Regulation and ensure safe work practices on site
• Coordinate and conduct the safety induction course to all site staffs
• Submission of Quarterly EHS performance & 6-monthly review of Risk Assessment
• Ensure and to carry out duties in accordance to WSH Act & Integrated Management System
• Assist WSHO to establish, update, maintain, and implement the Safety and Health Management System
• To assist WSHO for all safety promotional activities, safety audits, safety meetings and execution of safety programmes

Requirements:

• Advanced Certificate in Workplace Safety and Health or equivalent
• Minimum 2 years of relevant working experience

A Research Fellow position in enzyme engineering/synthetic biology for CNegSAF project is available at the Campus for Research Excellence and Technological Enterprise (CREATE) in Singapore.

CNegSAF PROJECT

CNegSAF Project: Carbon Negative production of advanced Sustainable Aviation Fuels using twin synthetic bacterial consortia

Hosted by CNRS@CREATE, the program ‘Carbon Negative production of advanced Sustainable Aviation Fuels using twin synthetic bacterial consortia Project’ (CNegSAF) is an international collaboration between world leading institutions in France and Singapore including CNRS, Toulouse Biotechnology Institute (TBI), National University of Singapore, A*Star (SIFBI), and Nanyang Technological University. CNegSAF aims to demonstrate the feasibility of using a synthetic bacterial consortium to convert green hydrogen and concentrated waste CO2 (released by chemicals companies) into sustainable aviation biofuels. This innovative research program has the potential to significantly contribute to Singapore’s and the world net-zero emissions target while supplying sustainable aviation fuels to the aviation industry.

Read more about the CNegSAF project here.

DESCRIPTION

To join this team, we are looking for a candidate who will be in charge of enzyme engineering activities using state-of-the-art evolutionary engineering and computational enzyme design techniques. The candidate will be involved in the development of screening protocols, construction and screening of enzyme libraries, designed by in silico molecular modelling. These enzymes will be further used for the creation of novel metabolic pathways for terpenoid production in engineered bacterial strains.
The perspective researcher will work in a multidisciplinary environment with access to high-throughput screening equipments (both in Singapore and Toulouse, France) and have frequent and strong interactions with other scientists involved in metabolic engineering, pathway engineering and computational enzyme design.

EXPERIENCE & QUALIFICATIONS

• PhD in Molecular Biology, Biochemistry, Biochemical engineering or related field
• Experience with enzyme engineering and enzyme library construction
• Expertise with HT screening, assay design and development and trouble shooting
• Experience in structural biology and molecular modelling/computational enzyme design would be a plus
• Preferred experience with protein production, purification, characterization and crystallization knowledge
• Preferred experience with metabolic engineering/synthetic biology background
• Strong communication with structured reporting and organizational skills
• enjoy working in a team-oriented environment
• Good English skills are required.

FURTHER INFORMATION & CONTACT

Salary range: SGD 6,900 – SGD 10,000 (depending on suitability and experience)

The position is available starting February 2025 and for a duration of up to three years. The position will be mainly based in Singapore with possible visiting stays in Toulouse, France.

Applicants should send as soon as possible CV, summary of previous research and contact addresses of two references to:
Isabelle ANDRÉ (TBI, Toulouse, France): [email protected]
Xixian CHEN (A*-SIFBI, Singapore) : [email protected]
Bo XUE (SynCTI-NUS, Singapore): [email protected]
Thomas Lautier (TBI, Toulouse, France): [email protected]

Needed to perform administrative duties in the company such as

Workforce Records and Training needs

Procurement of Materials & Office supplies

Collection of Materials

Coordination with various Project sites

General Housekeeping in Office

Assist in HR Matters

Experience in work permit matters

Should have good knowledge of excel

Must be able to communicate with various parties

Job Descriptions

• Preparation of Tender submission & project budgets
• Monitoring of procurement process
• Preparation of cash flow forecast Valuing completed works, filing of progress claims and all other necessary contract documents administration works
• Prepare interim valuation and certificate of sub-contractors claims according to work completed and evaluate variation claims
• Monitoring of procurement process
• Attendance of site/technical meetings
• Evaluation of price comparison summary
• Any other ad-hoc duties as assigned

Requirements

• Degree in Construction, Quantity Surveying or equivalent
• Strong technical background with sound knowledge of pre and post-contract duties
• Proficient in MS Office especially in Excel & Power Point
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Fresh Graduates are welcome to apply

We are looking for an Electrical Engineer with 2-5 years working experience who would have the following experience / knowledge/ qualities :-

• Basic Electrical Building Services Design knowledge
• Familiar with local codes and standards (e.g SS 568, 560 etc)
• Able to perform cable size and voltage drop calculation conforming to local codes and standards. Familiar with earthing and lighting protection works.
• Familiar with CAD software and able to make minor modification independently.
• Self-motivated individual able to lead a team of supervisors and electricians independently.
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Coordinate and support Project LEW for Power Turn ON, Testing and Commissioning.
• Project progress monitoring & updating to Project Manager
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g. cable containment routing drawings, small power and lighting layout etc)

Requirements

• Min Diploma in Electrical Engineering or equivalent
• Strong technical background with sound knowledge of electrical construction works
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Working in a “Live” process plant is an added advantage.
• Fresh Graduates are welcome to apply

• To ensure worforce compliance with WSH regulation, Compancy/Client procedures at site
• Conduct daily tool box meeting, safety checks and review Job hazard analysis
• Safety observation reports
• Fatigue Management
• Participate in company internal safety audits
• Responsible for upkeep of documentation on project matters
• Minimum 2 years working experience in Process/Construction Sector
• Advace Certificate in Workplace Safety and Health
• Working at Height Supervisor certificate
• Certified First Aider
• Managing Working at Height certificate will be advantage
• Lifting Supervisor certificate will be an advantages
• Possess minimum class 3 license will be an advantage

We are looking for an Instrumentation Engineer with minimum 5 years experience who would have the following experience/knowledge/qualities:-

• Familiar with local and international instrument and panel installation standards
• Hands on experience in calibration of instruments
• Able to Perform Loop checks
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Self-motivated individual able to lead a team of supervisors and Technicians independently.
• Project progress monitoring & updating to Project Manager.
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g Hook up drawings, P&ID, Instrument index, I/O list etc)
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Working experience in “Live” Process plants is an added advantage