Job Description

• Operate mobile crane to lift, move or reposition loads safety and precisely.
• Perform daily safety checks to ensure equipment is in safe operating condition.
• Arrange periodic maintenance of vehicle/equipment or when vehicle/equipment malfunctions.
• Other ad-hoc assignments assigned by your superior from time to time.

Requirements

• Possess a valid crane operator license issued by MOM.
• At least 2 years’ experience working with mobile cranes.
• Able to work independently with minimal supervision.
• Singaporeans and permanent residents only.

Responsibilities:

• Installing and repairing pumps and other equipment, including replacing motors, seals, bearings, and other parts as needed
• Inspecting pumps to determine any issues with wear and tear or damage, using tools such as ultrasonic testing equipment and bubble levels
• Maintaining records of maintenance activities and repair work performed on pumps
• Performing tests on new pumps to ensure they are operating correctly before they are installed into the system
• Troubleshooting problems with pumps or other equipment to determine the cause of malfunctions
• Repairing or replacing seals, bearings, couplings, or other components on pumps
• Installing, maintaining, repairing and replacing pumps, valves, and other equipment for water treatment plants, power plants, oil refineries, chemical plants, and other industrial facilities
• Repairing or replacing broken pipes, valves, fittings, or other components of a system

Career Level

Non-Executive

Qualification

Primary/Secondary School

Requirement:

• Supervise, organize, and plan activities to ensure smooth fabrication/Installation of construction structures within the stipulated schedule
• Estimate manpower requirement for extra work/daywork including materials, tools, and equipment.
• Prepare project progress reports and plan for one week look ahead of activities to be completed
• Perform MTO and update progressively to ensure proper control of material procurement and usage
• Ensure that manpower is effectively deployed to deliver the products timely
• Follow up on all fabrication and installation job fit up, welding and inspection
• Understand and ensure compliance in project requirement and scope of work
• Resolve any technical problems or issues faced at the work site
• To ensure site carry out according to daily site coordination.
• Control and minimize wastages.
• Ensure work activities are carried out in safe working environment.
• Other adhoc duties as assigned by the Immediate Supervisor/ Management.
• Attend the daily toolbox meeting and convey instructions clearly
• To assist the Project Manager in the daily activities of work
• Must have Structural Steel Supervisor Certificate
• Able to work independently, proactive, and self-motivated

Responsibility:

• Min Diploma or equivalent in Civil Engineering.
• At least 6 years of relevant experience in the construction industry
• Independent, diligent, and highly motivated with excellent team spirit.
• Able to work in team and cope in a fast-paced environment.
• Willing to travel around project site within Singapore.
• Overall project planning & scheduling
• Handle any other ad-hoc duties and tasks assigned
• Locals Singaporean prefered

Responsibilities:

• Assist in the production and assembly of semiconductor devices.
• Perform equipment setup and calibration.
• Monitor and maintain production equipment.
• Conduct quality control inspections and testing.
• Assist in troubleshooting and resolving equipment and process issues.
• Follow standard operating procedures and maintain documentation.
• Ensure compliance with safety and quality regulations.
• Collaborate with cross-functional teams to ensure smooth production processes.

Requirements:

• Min Diploma in Engineering or related field.
• Prior experience in Wafer Fab/ Semiconductor Industry.
• Ability to work well in a team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description & Requirements

This position reports to the Construction Manager / Project Manager

- Plan daily and weekly work for each section and liaise with site foremen, supervisors and workers on the work tasks and construction methods to be used

- Monitor progress of work, quality of workmanship in compliance with site and project requirements and quality records

- Check drawings against transmittal for discrepancies, built-ability information, revisions and coordination issues

- Maintain structural drawings, part prints and shop drawings to ensure they are in order with the register

- Implement project method statements and inspection and test plans

- Monitor site progress, piling progress and initiate setting out verification and update CM and PM on all issues.

- Inspect site progress works to ensure the quality and accuracy of the site works

- Maintain piling records as per inspection and test plan and contract documents

- Check quality and quantity of subcontract works done

Experience / Skill Required

• Minimum 2 years’ of civil engineering experience
• Familiar with design & visualizations software such as AutoCAD / Civil 3D or similar
• Working knowledge of various construction disciplines, cost control, contract administration, scheduling, safety regulations would be an added advantage
• Able to work at Pasir Ris East
• Alternate half day work on Saturdays

Our client is a Global MNC, one of the leading players in the Engineering sector. Due to business needs, they are now recruiting a Transport Operation Executive to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Supervise a team of internal/external transport personnel, ensuring smooth operations/processes
• Facilitate communication among the company’s different departments to enhance efficiency in the movement/operations of the company’s equipment, ensuring optimal transport arrangements
• Coordinate the scheduling and logistics of incoming/outgoing equipment to meet the necessary deadlines
• Receive/Manage incoming goods and shipments, coordinating with the various freight forwarders, and arrange the parking accordingly
• Suggest/Implement cost-saving measures, optimizing transportation expenses and meeting the company’s saving objectives
• Update/Maintain the necessary transport delivery information, distributing the necessary documents to the various departments
• Work closely with both internal/external stakeholders to guarantee the seamless execution of the company’s transportation operations
• Monitor/Enhance the company’s transportation policies, identifying areas for improvement and implementing potential policies
• Negotiate/Liaise with various external transport providers to identify the best cost saving methods for transporting the company’s equipment between various locations
• All other adhoc duties as assigned

Requirements:

• Minimum Diploma in Logistics and Supply Chain Management, or other relevant field of studies
• Minimum 3 years of experience in Logistics/Transportation Operations

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Our client is a Global MNC, one of the leading players in the Engineering sector. Due to business needs, they are now recruiting a Logistics Officer to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Facilitate the organization/coordination of shipments
• Regularly place and receive orders for components and parts
• Oversee/Maintain the current stock levels of components and parts
• Generate/Submit the relevant monthly reports to key management stakeholders
• Examine/Verify invoices from the various vendors and stakeholders, and complete the invoicing process while acquiring shipping quotations
• All other adhoc duties as assigned

Requirements:

• Min Diploma in any relevant field of studies (Relevant working experience can be considered as well)
• Min 1 year of relevant logistics working experience
• Knowledgeable in Microsoft Office

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Diploma/ITE in Electrical Engineering with 3 years’ experience respectively.

Must have valid EMA Electrician or Technician LEW Grade License.

• Able to setup Diesel Generators for Temporary Construction use.
• Prepare Electrical tools checklist and keep record.
• Able to read SLD
• Able to test and troubleshoot electrical circuits and tools

Job Description

• Assist in supervising and coordinating M&E services work
• Attend project meetings; liaise and coordinate with clients, consultants, relevant authorities and sub-contractors on M&E issues.
• Manage M&E subcontractors’ submission of method statements, drawings, materials, samples, and work progress.
• Compliance with all necessary standards, code of practice and safety regulations;
• Handle any other ad-hoc duties and tasks assigned

Job Requirement

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• At least 4 year(s) of working experience in the related field is required for this position.
• Prefer with construction industry background.
• Work independently and liaise effectively with with sub-contractors and suppliers
• Good communication and Interpersonal skills

Job Description:

• Prepare and Monitor project cost budget, cash-flow for project, track changes in design/construction work, check variations and adjust budget projections accordingly.
• Source and Liaise with Site Personnel, Suppliers, Sub-contractors, Consultants and/or Architects for all project-related matters.
• Responsible for Progress Claims, Variation Orders, Final Accounts and Sub-contractor Progress Claims.
• Work closely with the project team in the Analysis, Evaluation and Negotiation of quotations, so as to ensure timely award of sub-contractors and suppliers.
• Ensure timely finalization of main contracts and sub-contracts.
• Provide Support in any other ad-hoc duties that may be assigned time to time.

Job Requirements:

• Candidate must possess at least a Bachelor’s Degree/ Post-Graduate Diploma/ Professional Degree in Engineering (Civil), Quantity Surveying or Facilities/ Building-related with a minimum of 3 years of relevant work experience.
• Have a positive working attitude, pro-active and meticulous in his/her work.
• Posses strong inter-personal communication & negotiation skills; able to work as a team.
• Well-versed in MS offices tools i.e. Words and Excel.
• Able to work under pressure and meet tight deadlines, either independently or in a team environment.

Job Description

• Working closely with project management team to initiate, implement and monitor workplans.
• Assist in maintaining established BIM standards and workflow.
• Prepare design and construction documentation.
• Coordinate and liaise with project / construction team on submissions, updates or changes, and checking for clashes with other disciplines
• Handle project coordination.
• Able to use BIM software and modelling techniques including but not limited to AutoDesk Revit (Architecture/Civil & Structural/Mechanical/Electrical), & etc.
• Other ad-hoc duties assigned

Job Requirements

• A recognized Degree/Diploma in Electrical/Mechanical/Construction
• Minimum 2 years of relevant working experience in construction industry
• Good knowledge of AutoCAD software, well-versed in using Autodesk Revit BIM software/tools.
• Possess strong initiative, resourceful and independent
• Possesses good interpersonal skills for BIM coordination and collaborative processes.

Description

Assist the Senior Project Engineer in supervising the activities of a group of technicians and engineers. Oversees the accomplishment of preventive maintenance programs, co-ordinates the activities of corrective maintenance, and controls the cost of maintenance orders.

Responsibilities

· Responsible for the delivery of projects in compliance with system specifications.

· Involved in project management and product development.

· Generate system specifications, test plans and procedures as well as system, site installation design and documentation.

· Coordinate installation supervision such that commissioning and start up is in accordance to contract.

· To liaise with client’s representative on all project issues and sub-contractors.

· Plan monthly work schedule and set productivity to be achieved.

· Ensure materials availability at site.

· To monitor the progress of projects.

· To initiate and undertake action to prevent the occurrence of non- conformity.

· To verify technical specifications for adequacy.

· To maintain and disseminate technical specifications to superintendent and supervisor.

· To identify and record any product quality problems and to verify the implementation of solutions.

· Involved in all site meetings.

Requirements

· Diploma or Degree in Engineering (Electrical, Mechanical, Maintenance) or equivalent preferred

· Preferably with 1-2 years of relevant in handling maintenance projects in Oil and Gas industry and petrochemical industries

· Able to work in a team.

· Enthusiastic, dynamic and customer orientated personality is required.

· Able to handle pressure

· Good supervisory skills.

Civil Engineering | Degree | Up to $7000 | Marine Construction | Pioneer

5.5 days
Mon-Fri: 9am-530pm || Sat: 9am-12pm
$3,500-$7,000
Pioneer Rd(Transport Provided from Joo Koon MRT)

Job Duties

• Manage and execute project in cost effective, on time delivery with quality standards to meets client expectations;
• Managing the projects in accordance to our Company’s ISO 9001, ISO 14001 & OHSAS 18001 Standards and contractual requirements;
• Pre and post-contract stages from vetting tender documents, organizing tender activities as well as settlement of accounts with owner, sub-contracts / suppliers;
• The development and implementation of project management plans through the provision of project scheduling, monitoring, reporting and forecasting, ensure that safety regulations are complied;
• Providing and preparing all scheduling, budgeting and specification for the project work;
• Check drawings and quantities and ensure that the calculations are accurate for the project implementation;
• Carry out project planning, cost control, project management and documentations;
• Provide the direction in construction planning, coordinate work with other departments, sub-contractors, clients and consultants to ensure overall construction progress as scheduled;
• Liaise and assist in submission of all necessary permit, license to all relevant authorities for the project work;
• Attend meetings, correspondences and liaise with clients, sub-contractors and suppliers;
• Resolve design and site problems encountered during the construction period;
• Plan and manage actual and post construction issues with the clients, consultants, sub-contractors and relevant authorities;
• Ensure proper documentation of the project, such as record correspondence, as-built drawings, etc..;
• Close supervision of work carried out by sub-contractors and suppliers to ensure adherence to project schedule;
• Ensure highest quality on the work carried by the sub-contractor, fabricators and suppliers;
• Liaise with consultants, clients, sub-contractors and suppliers on the implementation of the projects;
• Check on the progress claim submitted by the sub-contractors;
• Monitor, track, report project progress, supervise Engineers, Supervisor, Technicians and sub-contractors’ on site;
• Follow-up on the defective work and ensure timely rectification by contractors, fabricators and suppliers;

Job Requirement

• Recognized Degree by BCA in Civil Engineering.
• Experience in Civil Engineering Projects, especially in Marine Construction of Jetty, Wharf, Harbour, Dredging, etc.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

1. Accredited with the JAC of IES/ACES

2. At least 3-5 years of working experience

3. Pipe-jacking working experience

4. Inspection, supervision and management

of site in accordance to specications,

drawings and authorities requirements

5. Shall supervise all civil, structural and

getotechnical building works, including

structural elements for architectural work,

building services, electrical and mechanical

(M&E), and specialist engineering works

forcompliance with the PUB/LTA's

requirements and other authorities and

agencies requirements for permanent works

and temporary works.

- Interpret ground conditions through ground investigation;

- Manage and control workers and monitor their work closely to keep site safe;

- Able to work under pressure and meet tight deadlines with minimum supervision

- Strong initiative and resourcefulness

- Posses Class 3 Driving Licence is an added advantage

- Degree / Diploma in Geology / Civil / Geotechnical Engrg.

- Posses Certification Course for Site Investigation Supervisors (BCA) is an advantage

- At least 1 years in Soil Investigation, Instrumentation & Monitoring, Geotechnical experience.

Job Description:

• To attend all necessary meeting with clients or subcontractors during various stages of the project.
• Receives instructions from construction managers and distribute to subcontractor accordingly. The engineers shall take charge of day-to-day running and coordination of all site works, inspection and include testing and commissioning.
• To prepare detailed design and engineering of entire Electrical system.
• Carry out resources planning and control of materials, tools and equipment ordered and delivered.
• To ensure cost control, maintain project timeline and manage manpower resources for the project.
• To liaise with appointed Mechanical and Electrical PE for all submission to authorities.
• To attend to site progress meeting and site technical issues and report to Construction Manager.
• To attend and liaise with authorities for plan approval and site inspection including preparation and vetting drawings plan for submission to all Authorities.
• Will be the frontline contact with Civil and SWCs’ representatives on site.
• Monitor daily site progress and update programme on the site progress report.
• Identify complex problems and review related information to develop and evaluate options and implement solutions.
• Using logic and reasoning to identify the strengths & weaknesses of alternative solutions, conclusions or approaches to problems.
• Responsible for technical support activities including installations, testing, commissioning, repair, modifications, preventative maintenance and troubleshooting of systems.
• Proficient in REVIT and AUTOCAD software applications.
• Handle and resolve technical and engineering problems.
• Other ad-hoc duties when assigned.

Job Requirement:

• Working experience with LTA projects or similar government authority.
• Candidate must possess at least Bachelor's Degree/ Post Graduate Diploma/ Professional Degree in Engineering (Electrical/ Electronic) or equivalent.
• The Electrical Engineer shall have minimum of Five (5) years engineering experience after tertiary education with at least Three (3) years relevant experience in commercial mixed development projects of a similar size and complexity.
• Required Skill(s): Organizing, Planning and Prioritizing Work, Time Management, Communication, Go-getter mindset

Our client is a F&B Manufacturing MNC. Due to their current expansion plan, they are looking for an Assistant Engineering Manager to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities:

• Lead a team of engineers and technicians in various projects and improvements.
• Manage to oversee the overall production process and quality control.
• Manage production, quality, and maintenance in industrial plants.
• Provide training and mentorship to other related supporting staffs/engineers on electronical and mechanical related troubleshooting skills/knowledge.
• Conduct performance evaluations and resolve internal issues.
• Collaborate on project plans and specifications.
• Ensure technical accuracy and compliance of work.
• Establish and enforce policies and procedures.
• Coordinate departmental activities.
• Provide support for downtime and standby duties.
• Any other duties as assigned.

Requirement:

• Diploma in any discipline
• At least 5 years relevant working experience in similar industry
• Good understanding/knowledge in electronical and mechanical troubleshooting concept will be a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

1. Able to manage project and come up with detailed cost, scheduling and managing

2. Fully independent and able to handle project with many stake holders

3. Must be responsible for the safey, timely and high quality exection of the project

4. Able to design electircal works, Solar works

5. Well versed with AUTO CAD

6. Manage client & subcontractors

7. Recognised Univesity qualifcation

Job Description

• Working closely with project management team to initiate, implement and monitor workplans.
• Assist in maintaining established BIM standards and workflow.
• Prepare design and construction documentation.
• Coordinate and liaise with project / construction team on submissions, updates or changes, and checking for clashes with other disciplines
• Handle project coordination.
• Able to use BIM software and modelling techniques including but not limited to AutoDesk Revit (Architecture/Civil & Structural/Mechanical/Electrical), & etc.
• Other ad-hoc duties assigned

Job Requirements

• A recognized Degree/Diploma in Electrical/Mechanical/Construction
• Minimum 2 years of relevant working experience in construction industry
• Good knowledge of AutoCAD software, well-versed in using Autodesk Revit BIM software/tools.
• Possess strong initiative, resourceful and independent
• Possesses good interpersonal skills for BIM coordination and collaborative processes.

Working Location: Woodlands

Working Hours: Monday to Friday, 8:30 am – 5:30 pm.

Salary: $2,500 - $3,500 (Depending on experience)

Responsibilities:

• Conduct assembly, debug, and test runs of customized modular machines, including commissioning.
• Provide on-site technical support for equipment operation at customer premises.
• Implement design modifications for cost reduction, including simplified design, parts reduction, and exploring cheaper alternatives while maintaining or enhancing product performance.
• Procure necessary items or assist in procurement for job performance.
• Write and maintain documentation, including work instructions, assembly instructions, manufacturing procedures, and test procedures.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering with 2 to 3 years of relevant experience.
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design is advantageous.
• Self-disciplined with strong project management skills.
• Ability to work independently.
• Excellent interpersonal and communication skills.
• Willingness to travel when required.

Interested applicants, please email your resume to [email protected]

Tan Li Lian

EA 01C3135

Reg R1100465

Electrician/Senior Electrician

Job Description

· Perform troubleshooting and recommend appropriate corrective solutions.

· To carry out installation, testing, servicing and troubleshooting of all electrical duties and any other duties assigned by your superiors

· To comply with safety rules and regulations at all times

· Any other duties assigned by the Management as and when necessary

Requirements

· Candidate must possess at least a Professional Certificate/NiTEC in Electrical Engineering or equivalent

· At least 1 years of relevant working experience

· Able to read simple electrical and control circuitry

· Team player with positive attitude and willing to learn

· Fresh graduate is welcome to apply.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Admin Assistant (M&E Engineering)
• Working Location: East – Mountbatten
• Working Hours: 5 days (Mon-Fri: 9 am - 6 pm)
• Salary Package: Up to SGD 3000 + Bonus
• Duration: Permanent

Key Responsibilities

• Arrange and coordinate meetings and events.
• Answer and manage incoming calls and correspondence (e-mail, letters, packages etc.).
• Perform general clerical duties including photocopying, faxing, and mailing.
• Handle requests for information and data.
• Prepare and modify documents including correspondence, reports, drafts, memos, and emails.
• Maintain office supply inventories and coordinate maintenance of office equipment.
• Coordinate project-based work.

APPLY NOW!!!

• Min. O level
• Min. 2 years of working experience in a related field
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65572 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Reports to Administrative Manager
• Management of Public Relations
• Invoicing for Scrap Management
• Ensuring Contract Safekeeping
• Managing Filing Systems
• Administration of BCA Coretrade
• Enrolling in WSQ Courses
• Coordinating with Clients for General Affairs
• Monitoring Invoices for Singtel, Electricity, Car Rental & Others
• Managing Coordination for any Business Administrative Tasks

Job requirements:

• Diploma or Certification in Administrative Course or Equivalent Experience
• Minimum 1-5 years’ experience in similar role
• Location : Tanah Merah
• Project: Pulau Tekong Project

Our client is a multinational company in the Manufacuting industry. Due to their current expansion plan, they are looking for an Engineering Manager to join their Engineer team, in hopes of developing the current high performing team. They are located in the East – easily accessible.

The Engineering Manager's responsibles are:

• Supervise a team of Project Managers / Engineers when new projects are introduced into the company
• Liaise with automation projects to improve production efficiency and reduce manual labour
• Corporate with Management and relevant department to evaluate project specification
• Analyse projects in terms of feasibility, risk and challenges
• Handle and supervise automation projects to improve productivity
• Handle and plan for Project expenses to ensure costs are within set budget
• Develop and execute Programs to build and develop Engineering strength
• Liaise with training to engineering department and production staffs in relevant topics that can enhance their capabilities and knowledge

Requirement

• At least 5 years of relevant experience in Molding/ Medical Devices industry
• Minimum Degree in any discipline
• Familiar with technology for plant development
• Knowledge in Automation design and concept

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

• Position: Project Engineer (3D Drawings /AutoCAD /Design) - Changi
• Location: Changi North Street
• Working hours: 5 days work week (Monday - Friday) - 8.00am to 5.30pm
• Salary (commensurate with experience): Up to $4500 + Performance Bonus
• Duration: Permanent
• Industry: Engineering and Manufacturing

Main Responsibilities:

• Provide layout drawings and bills of materials
• Prepare and maintain projects documents and records such as Work Orders, Design and Development Discussion form and other related project documents
• Monitor and co-ordinate project status with production and ensure good quality yield product
• Ensure satisfactory project execution

Requirements:

• NTC or Diploma in Mechanical & Electrical Engineering
• With at least 2 years working experience in Engineering field
• With Drafting knowledge in AutoCAD is an advantage
• With Class 3 driving licence is an advantage

Email your resume to [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224