Job Description & Requirements

• Truck driver with Class 4 License.

• Follow instructions; locate and read location and road maps.

• Pre-inspect truck.

• Pick up goods and materials, verify loads for accuracy, and deliver them as instructed.

• Load and unload cargo.

• Responsible for basic vehicle maintenance; comply with all safe work practices, policies, and processes at all times.

• Complete and verify paperwork for accuracy

• Update job knowledge by participating in educational opportunities, reading professional publications, maintaining personal networks, and participating in professional organizations.

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills.
• Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Key Roles and Responsibilities

• Perform front end engineering design (FEED) and basic design for Electrical system of renewable energy projects, e.g. Solar (Roof top, ground mounted and floating), Battery Energy Storage (BESS) projects, Wind projects and mix of Solar, BESS, Wind projects including configuration study.
• Provide technical expertise to develop electrical engineering design deliverables (e.g. SLDs, Layouts, equipment list, load list, datasheets, specifications, electrical protection systems and sizing calculation etc.) for Solar, BESS, Wind, and other projects for Electrical system.
• Review inter-disciplines design/ engineering with consideration for safety, interfacing, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost.
• Support Project-In-charge for over-seeing contractors / vendors for on-site electrical works and accountable for updated and accurate records of all electrical systems
• Conduct engineering activities during business or project development including but not limited to pre-feasibility/ feasibility studies, technical due diligence, electrical layouts, electrical schematics, protection coordination, review of power system studies (short circuit, load flow, earthing, stability etc.)
• Preparation of technical proposal to customer, project / EPC scoping strategy, vendor selection (bid review, technical clarification and bid evaluation), carried out cost estimation, determine LCOE, and all related technical support a etc.
• Stay up to date with advancements in Electrical, Solar, BESS, Wind power technology, Evaluation of new technology and innovative solutions e.g. competitive alternatives to SF6 insulated GIS, etc.
• Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR etc.
• Attend FAT/SAT and Functional testing to ensure electrical equipment is meeting the design intent & project premise.
• Participate in HAZOP, QRA, EIA, SPD studies. Liaise with LEW for system studies and other regulatory requirements.
• Review and approval of detailed design documents submitted by Contractors and ensure compliance with Engineering Standards, company & industry best practices.
• Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline’s schedule of rates and cost estimate template, engineering checklists etc.
• Ensure all activities carried out are in full compliance to all regulatory and authority requirement of Singapore and other SEA countries (Philippines, Malaysia, Vietnam etc.) i.e. Energy Market Authority Act, Electricity Act and local Code of Practices during execution of Engineering Design.

Qualifications & Experience

• Bachelor’s degree in electrical engineering
• At least 8-15 years of experience in Solar and BESS Electrical design, energy business related engineering management and project management (engineering and construction).
• Well verse of Solar resource assessment, PVsyst software, BESS sizing techniques, software and tools (Homer etc.).
• Experience in other renewable energy projects, especially Wind, CCU is preferred.
• Knowledge of Power system studies software (ETAP etc) is desirable.
• Have a passion and experience in areas related to energy transition and infrastructure

Skills/competencies & Preferred Characteristics

• Demonstrate critical thinking, positive attitude, teamwork, analytical, communication and leadership skills.
• Strong self-motivation and work ethic, flexible and thrives under pressure.
• Excellent project management and organizational skills.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Project execution processes

Responsibilities:

1. Assist the Project Manager for the execution of awarded projects.
2. Co-ordinate with clients, consultants and main contractors on project plan and implementation.
3. Monitor and carry out quality check on progressive completed work and make recommendation for effective project management.
4. Inspect and evaluate on work performed by subcontractors.
5. Prepare project reports and check on updated drawing completion.

Requirements:

• Diploma / Degree in Electrical Engineering, Mechanical Engineering or related field.
• Preferable with minimum 1-3 years of working experience in M&E field.
• Ability to work independently and willing to travel based on the project site locally.
• Basic computer skills: Microsoft Office and Microsoft Project.
• AutoCad competency and possession of relevant safety certificates is an advantage.

Duties & Responsibilities:

• Look into the company’s BIM Project Deployment Plan and develop BIM Project Execution Plans, BIM collaboration, documentation, enforcement, monitoring and workflow to meet the project.
• Work closely with project teams to provide solutions for BIM related technical issues. Assist project teams and design teams with BIM implementation
• Set up processes & workflows for efficient delivery of the project BIM deliverables.
• Set guidelines for internal and external model exchanges between project stakeholders and monitor its progress
• Attend client meetings & lead the decision-making process affecting the BIM deliverables
• Liaise and coordinate and other trades for cross-team support on BIM software
• Regularly meet with key project staff to update on progress. Document meeting minutes highlighting key action point. Ensure the issues highlighted are resolved, concluded and monitored for resolution provided by the design team.
• To oversee the BIM Coordination and daily management of BIM project data sets/workflows and project set up
• Collaborate with team and other relevant departments to ensure all drawings are in order as per design requirements.
• Any other duties deemed necessary and as assigned by the Senior Management.

Qualifications & Experience:

• Certificate in AutoCAD Autodesk advanced module.
• Certificate in Revit MEP Autodesk advanced module.
• Higher NITEC / Diploma in Mechanical engineering or equivalent.
• Minimum 3 years of experience in M&E drafting using AutoCAD, Revit and BIM preferably from Construction industry.
• Outgoing personality with strong interpersonal and communication skills.
• Ability to work independently and target oriented in a stressful environment.
• Ability to work well in a team and demonstrate initiative and commitment.
• To be able to converse in English and work effectively with Internal staff including Site Foreman, Supervisors, Engineers, Managers and Client’s BIM representatives.

Duties & Responsibilities:

Cost Estimation:
•Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
•Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off
•Perform quantity take-offs for materials and labour required for MEP installations;
•Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control
•Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
•Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement
•Assist in the preparation of tender documents and participate in the procurement process;
•Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration
•Administer and manage contracts related to MEP works, including variations and claims;
•Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering
•Identify opportunities for value engineering to optimize project costs without compromising quality;
•Work closely with design and construction teams to implement value engineering recommendations;

Risk Management
•Identify and assess potential risks related to cost and contract issues;
•Develop strategies to mitigate risks and ensure project success;

Cost Reporting
•Generate regular cost reports to keep stakeholders informed of project financial status;
•Provide analysis and recommendations based on cost reporting data;

Collaboration
•Collaborate with architects, engineers, contractors, and other project stakeholders;
•Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance
•Ensure compliance with relevant regulations and standards in MEP construction;
•Stay updated on industry trends, codes, and best practices;

Ad-Hoc
•Undertake cost analysis for repair and maintenance project work;
•Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:
• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.

• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.

• Good working knowledge in Mechanical and Electrical.

• Organizational skill with attention to detail, adaptable and flexible.

• Good communication and facilitation skills.

• Ability to work well in a team, independently and demonstrate initiative and commitment.

Duties & Responsibilities:

• Lead EHS department.
• Develop, review, revise, maintain and implement EHS Management System.
• Ensure legal compliance as per statutory requirements.
• Conduct regular EHS inspections and audits.
• Manage contractor from the EHS perspective.
• To investigate all incidents on the work site and implement correction actions.
• Review and revise all risk assessments to ensure compliance.
• Able to drive EHS culture in the company
• Conduct routine checks on general safety practices and propose corrective actions and measures to be taken.
• Ensure adequacy, effectiveness and readiness of fire protection system and Emergency Response Team management system for Office and Factory.
• Ensure inspection and review of all project sites activities and operation (includes Main office and 15 Changi Factory) and alert relevant Section Head of any machinery, equipment, appliance, activity or process used in each department that exposes any person to the risk of bodily injury, and to recommend appropriate corrective measures.
• Promote safe and healthy working conditions through education, awareness campaigns, training courses, drills, competitions, contests and other activities.
• Liaise with statutory bodies on EHSS-related licenses and permits and keep updated on the latest change in regulations and Acts and be conversant with all waste management regulations, procedures and licensing requirements.
• Conduct fire and safety training to employees.
• Constant update to management of EHSS performance and the continual improvement plan.
• Liaise with 3rd party security service provider and ensure the appropriateness and effectiveness of services rendered to organisation.
• Constant plan-do-check-act on the related EHSS matter of plant's Environmental, Health and Safety Management System and ensure continual improvement/upgrading of the system.

Qualifications & Experience:

• Diploma in Workplace, Safety and Health with 8 years relevant working experience in Construction Engineering Industry.
• Degree in Workplace, Safety and Health with 5 years relevant working experience in Construction Engineering Industry.
• Strong technical competency, good interpersonal and communication skills.
• Ability to work independently and target oriented in a stressful environment.
• Ability to interact effectively with colleagues in other business units.

Benefits:

· Basic salary up to $3600

· Good career progression

· AWS + VB

Job Scope:

· Report to Sales Manager and attend meetings to address delivery and production matters

· Achieve monthly and yearly sales targets and manage new customer accounts

· Coordinate daily production plans and logistics schedules for smooth operations

· Collaborate with departments (sales, inventory, production) to ensure timely delivery

· Prepare and review sales forecasts, performance reports, and KPIs

· Build and maintain relationships with customers, addressing issues and providing solutions

· Handle customer inquiries and manage inventory, including aging and excess stock

Job Requirements:

· Possess a diploma in Mechanical/Electrical Engineering or related field

· At least 2 years of related working experience

· Competent in understanding technical writing

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Tan Pei Xuan (R24124430)

This role requires highly cross functional interactions with key site functions to ensure success in production and release performance. Individual must be able to effectively communicate and collaborate closely with the team members and various SME to ensure equipment are operational to sustain daily operations, resolve operation challenges and implement effective measures to address the challenges to ensure without compromising on safety and compliance.

Location: Tuas

Salary up to $10000

1 Year Contract

Design & Project Engineering:

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule.
• Lead F&E to participate in technical transfer activities and cross-functional meetings.
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints.
• Effectively manage and work with project CQV team to ensure timely delivery of projects.
• Prompt updates or escalation of issues and challenges
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment.
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design.
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo.
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications.
• Work with project managers to complete design and engineering projects within schedule, budget and quality constraints.
• Develop technical solutions to complex problems requiring the regular use of ingenuity and creativity.

Daily Operations

• Accountability and ownership of assigned equipment
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Effectively communicate and collaborate with cross function stakeholders to address operational challenges and concerns to ensure sustained operation and minimal interruptions to operations activities.
• Lead and participate in equipment breakdown investigations to identify root causes. Effectively communicate to the customers on the subsequent plans, short term, and long-term mitigating actions.
• Collaborate closely with cross functional SME to implement effective corrective, preventive action and improvements to eliminate or mitigate future recurrence.
• Ensure operation continuity through asset lifecycle management planning, assess and identify impact to safety, compliance, operational schedule and cost.
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state.
• Accountable for deviation/change control associated to process equipment performance.
• Responsible for investigation of deviations, development of corrective and preventive actions
• and implementation of change controls in a timely manner.
• Support equipment readiness initiatives for New Product Introduction or Product Campaign Changeover
• Responsible for operation and reliability of Biotechnology process equipment and/or single use systems assigned.
• Apply process equipment knowledge to perform troubleshooting of equipment failures/malfunctions and the development of technical assessments during normal working hours and after hours when required.
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo.
• Apply knowledge of Operational Excellence practices such as lean maintenance to drive continuous improvement.
• Responsible for completion of process equipment periodic review, data integrity assessment and security assessment in a timely manner
• Collect, organize, analyze and present results for operational issues or engineering projects of various scale and complexity.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

• Well Established Company
• Basic $4000 - $5200 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Lead, coordinate and manage the project, QAQC
• Liaise with respective functions to prepare project planning and progress report as and when required by authorities or clients and consultants.
• Ensuring projects meet agreed specifications, budgets or timescales
• Supervision of sub-contractors’ project execution processes.
• Attend technical meeting with authorities and consultants
• Ensure safe work procedures are implemented to control risk
• Familiar with relevant legal requirement
• Other duties as and when assigned

REQUIREMENT:

• Candidate must possess at least a Bachelor's Degree in Civil Engineering or equivalent.
• Required skill(s): MS Office, MS Project, AutoCad.
• Ability to work independently with minimum supervision and to meet tight deadlines
• Good team player

Roles & Responsibilities

• Review project specifications, technical clarifications, review accuracy of construction drawings, charts and forms
• Carry out architectural works scheduling, material requisition, cost control, project supervision and documentation.
• Prepare Material for submission
• Check & ensure of drawing according to design
• Coordinate with the Architect, Structural and M&E staff members to resolved related problems and issues.

REQUIREMENT:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent that is recognized by Board of Architects / BCA
• At least 3 year(s) of working experience in Commercial Building projects in Singapore.
• Good interpersonal and communication skills.

Responsibilities:

· Project coordination and supervision of site installation, testing and commissioning

· Design Development & Calculation for Plumbing, Sanitary and Gas System.

· Preparation of design construction drawings

· Schedule and monitor work program and activity to ensure on-time handover of work and liaise with suppliers/vendors to ensure on-time delivery of materials.

· Work Assessment for Progress Claims and Sub-Contractor’s payment

Requirements

· Diploma / Degree in Mechanical Engineering

· Min 5 years working experiences in design installation and T&C of Plumbing, Sanitary and Gas System

· Good interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

· Ensure thorough understanding of project terms and requirements.

· Review detailed drawings, and provide technical advice on practical design and construction.

· Prepare, schedule, coordinate and monitor the assigned projects.

· Prepare, update and maintain document summary or the necessary documents for projects.

· Prepare and submit the required engineering reports, documents, and drawings to the relevant authorities for approval.

· Update, manage and compile schedules of assigned projects with accurate data and report to the manager.

· Interact with clients to interpret their needs and requirements.

· Cooperate and communicate effectively with the project participants to provide assistance and support, to meet delivery timeline, optimize cost efficiency and meet customer specification.

· Feedback on workflow issues to manager in order to enhance efficiency and productivity.

· Manage all expected / unexpected change orders or deviations during project execution.

· Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

· Any other job as assigned by the Management from time to time.

• Site coordination, project schedule planning, coordinate site works with subcontractor.
• Design and deploy HVAC controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services.
• Prepare and submit operations and maintenance manuals.
• Projects management and implementation and troubleshooting.

Qualifications:

• Bachelor’s degree in electrical engineering or Instrumentation Engineering.
• Job Experience : At least 8 years of work experience in Electrical and Instrumentation system.
• Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Effective leadership and mentoring skills with a commitment to developing team members.
• Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

Responsibilities and Duties:

• Site coordination, project schedule planning, coordinate site works with subcontractor.
• Design and deploy HVAC & Mechanical system and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services
• Prepare and submit operations and maintenance manuals
• Projects management and implementation and troubleshooting

Qualifications:

• Education level: Preferable to hold Bachelor’s degree in Mechanical engineering or HVAC Engineering.
• Job experience. At least 5-8 years of work experience in mechanical and Instrumentation system.
• Strong knowledge of field HVAC Mechanical systems, control systems, and industry standards.
• Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Effective leadership and mentoring skills with a commitment to developing team members.
• Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Engineering Sales Advisor to join their Sales Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Engineering Sales Advisor:

• Present and sell products/services to current and potential customers.
• Develop and execute strategic sales plans for assigned products and clients.
• Engage customers to understand their needs and recommend suitable solutions.
• Analyze market potential and track sales progress within the territory.
• Build technical expertise on products to support customer interactions effectively.
• Cultivate and maintain strong client relationships to expand the product portfolio.

Requirements:

• Diploma in Mechanical Engineering
• 2 - 3 years Technical Sales experience in relevant industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Sales Engineer (Marine Engineering)
• Working Location: Monday – Friday, 9am – 5.30pm (One Saturday per month, 9am – 12pm)
• Working Hours: Tuas West
• Salary Package: Up to $3,800 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Prepare and deliver technical presentations to explain products or services to customers.
• Coordinate with customers and the engineering/operations department to assess service job requirements.
• Collaborate with administrative staff for efficient engineer deployment.
• Secure and renew orders, including managing overseas delivery and logistics.
• Work closely with other sales teams to understand customer needs and provide sales and technical support.
• Perform any other ad-hoc duties as assigned by the department head.

APPLY NOW!!!

• Bachelor's degree in Marine Engineering or a related field.
• Minimum of 1 year of experience in the Marine Industry.
• Strong technical knowledge of marine engines and spare parts.
• Willingness to work hands-on.
• Willingness to travel across various Asian countries for sales promotions and client meetings.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70837 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description & Requirements

• Candidate must possess at least a Primary/Secondary School, any field
• At least 3 years of working experience in the related field is required for this position
• Must possess a valid Class 4 Singapore driving license
• Must be able to work 6 days week
• Good interpersonal skill, hardworking and positive attitude
• Salary based on trip commission basis

Responsibilities:

1) Assist and work in SRTC Site for testing purposes.

2) Monitor train signals, speed limits, track conditions, and weather conditions to ensure safe operations.

3) Perform pre-departure inspections to ensure the train is in proper working condition.

4) Maintain communication with station control center, conductors, and other relevant personnel to coordinate operations and report any issues. 5) Respond to emergency situations, including braking, troubleshooting, and adhering to safety protocols.

6) Adhere to all relevant laws, company policies, and safety standards while driving trains.

Qualifications:

1) High school diploma or equivalent

2) Additional qualifications in engineering, mechanics, or transportation is preferred.

3) A valid Train Driver or Locomotive Engineer certification/license (requirements vary by country/region).

4) Prior experience as a train driver or in a similar transportation role preferred.

Responsibilities:

A) Project Planning and Coordination

1) Develop detailed project plans, schedules, and budgets for the LRT

Train.

2) Ensure the integration of design, engineering, procurement, and

construction phases.

3) Coordinate with various teams, including civil, mechanical, electrical, and software engineers.

B) Risk Management

1) Identify potential risks (technical, financial, operational) early in

the project.

2) Develop strategies to mitigate risks and ensure smooth project

execution.

C) Resource Management

1) Manage resources such as labor, materials, and equipment.

2) Oversee procurement processes for materials and services

needed for the project.

D) Quality Control

1) Ensure the project complies with safety standards, quality control

procedures, and regulatory requirements.

2) Supervise inspections, audits, and testing of materials and work.

E) Progress Monitoring and Reporting

1) Track project progress against timelines and deliverables.

2) Provide regular updates to senior management, stakeholders, and

regulatory bodies.

3) Address any deviations from the schedule or budget.

F) Problem-solving and Decision-making

1) Resolve issues related to construction, engineering, or delays that

might impact the project’s schedule or budget.

2) Make decisions on technical matters that could affect the overall

success of the project.

G) Project Closeout

1) Ensure all deliverables are completed, and the MRT system is

handed over to the operational team.

2) Organize the final inspection and commissioning process.

Requirements

1) At least a degree in Civil Engineering, Mechanical Engineering,

Electrical Engineering, or Locomotive

2) Certifications in Project Management (e.g., PMP, PRINCE2) are often

preferred.

3) Significant experience (5+ years) in managing large infrastructure

projects, especially in transport or construction industries.

4) Previous experience in MRT or rail projects is highly advantageous.

5) Familiarity with project management software (e.g., MS Project,

Primavera).

6) Knowledge of the MRT system design, construction, and operational

requirements.

7) Understanding of safety standards and environmental regulations.

8) Strong leadership to manage and motivate teams.

9) Excellent communication and interpersonal skills to manage

relationships with stakeholders.

10) Critical thinking to resolve issues related to project design,

execution, or regulatory challenges.

Responsibilities

1) Work effectively with Operations and Maintenance staff from the

Lines as well as other engineering departments to investigate

defects.

2) Develop methods, propose modifications and improve maintenance

strategies to rectify them.

3) Analyze and trend condition monitoring and defect data to identify

reliability concerns.

4) Develop methods, propose modifications and improve maintenance

strategies to overcome them.

5) Draft technical work instructions for preventive and corrective

maintenance activities.

6) Identify and implement cost effective technologies to enhance the

RTS Signaling, Communication & Control System performance.

7) Support LTA and RTSO projects in reviewing project design

specifications and ensure their adequacy for the safety, reliability,

maintainability and operability.

8) Provide other engineering support to the projects, as required.

Requirements

1) Degree in Electrical & Electronics Engineering or equivalent from recognized institution

2) Previous Railway System experience would be advantageous

Architecture / Interior Design, Building and Construction, Design, Engineering, General Management, Manage the Project, Prepare the Auto Cad drawing for New projects and upgrading works to Submit Clints when necessary, manage the Project. Manage the employees, Prepare Tender and Quotations when necessary. Monitor Project, Attend Meeting, arrange Meeting ect. Monitor clients and Project. Assist the Project when necessary. Work with Team works ect.

Roles and Responsiblities

• To take out quantities from drawings and prepare BOQ.
• To assist in claiming interim payment from Client.
• To calculate quantities for subcontractors’ claims.
• To contact subcontractors to request quotations.
• To record status of main materials consumption (i.e. Concrete, Rebar).
• To support Senior QS and Managers.
• Perform other QS-related duties as assigned by the Reporting Manager.

Requirement

Diploma/Degree in Building or Quantity Surveying

Min. 2 years experience

Microsoft Office

Experience in Infra-Structure Project of more than 200million.

Project location at Bugis

To Apply

Please submit updated CV with below details.

• Current & Expected Salary

• List of Projects Handled

• Notice Period

JOB DESCRIPTION

• Responsible to answer / reply customer enquiry and email.
• Responsible for update records
• Assist in all documentation works.
• Coordinate required work between departments.
• Assist on safety document
• Planning schedule
• arrange course for worker

REQUIREMENTS

• Immediate availability performed.
• Proficient in microsoft word & Excel.
• Team Player & possess good communication skills
• working day 5 days ( Monday to Friday 8:00 am to 5:00PM )