Job Description

We are looking for a Service Engineer as Maintenance Lead to lead and supervise the maintenance team in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Engineer shall report to and under the supervisory of the Maintenance Manager.

Job Responsibilities

• Assist the Manager in Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks and devise maintenance schedule and resources planning and deployment.
• Provide solution guidance to the Service Technicians and generation of maintenance documentation such as PM & CM report to Manager for review and final release to customer.
• Provide CM on faults to establish root cause on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment
• Plan and perform PM to system equipment at scheduled/ periodic basis including O-level testing and sensors calibration to ensure optimal operational performance
• Collaborate with OEM to establish root cause of fault findings and D-level components repair
• Supervise sub-contractor performing maintenance at site
• Convey updates to Manager and customer on maintenance progress.
• Review with Manager on maintenance processes and resources etc for maintenance process improvement.

Requirements

• Holding recognised Professional Certificate minimum with Higher Nitec/Diploma/ Degree in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution or at least 5-yearsworking experiences in above mentioned engineering fields.
• Advantage if have the knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting
• Resourcefulness and logical in problem-solving aptitude.
• Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc
• Ability to lead and manage a team, and to work independently with minimum supervision.
• Ability to conduct risk assessment and provide advisory to the team member and Manager.
• Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).
• Ability to converse well in English language and technically.

Job Description

We are looking for a Service Technician in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Technician shall report directly to the Service Engineer/Maintenance Lead and Maintenance Manager.

Responsibilities

• Assist the RO in providing Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks.
• Provide update and feedback on PM & CM work including maintenance documentation such as PM & CM checklist and status update to RO for maintenance report consolidation and generation to Manager for review and final release to customer.
• Attend to and conduct on-site CM to faults reported/raised by customer on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment.
• Perform on-site PM to system equipment based on planned scheduled including O-level testing and sensors calibration to ensure optimal operational performance.
• Work with OEM on fault findings on-site and off-site including D-level components repair by sub-contractor
• Convey updates to Lead Engineer on maintenance tasks progress.
• Review with Lead Engineer and Manager on maintenance processes and resources etc. for maintenance improvement.
• Perform any other related duties as assigned.

Requirements

• Holding recognised Professional Certificate such as Nitec/ Higher Nitec/ Diploma in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution; or at least 3-years working experiences in above mentioned engineering fields.
• Both local and foreigner as well as fresh graduate would also be considered.
• Advantage if have some knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting
• Resourcefulness and logical in problem-solving aptitude.
• Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc
• Ability to work as a team and occasionally independently.
• Ability to conduct on the job risk assessment and provide advisory to team member, Lead and Manager
• Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).
• Self-motivated, self-discipline and a service mindset with commitment and willingness to learn.
• Able to start work immediately or within a short notice is an advantage

Job Title: Assistant Engineer - Testing and Commissioning of Communication Systems

We are currently seeking a highly motivated and skilled individual to join our team as an Assistant Engineer in the field of Testing and Commissioning of Communication Systems. This is an excellent opportunity for individuals looking to grow their career in a dynamic and fast-paced environment.

To apply, please submit your resume to [[email protected]/ WA 8857 2766].

Responsibilities:

• Assist in the testing and commissioning of communication systems, including but not limited to telecommunication networks, radio systems, and data transmission equipment.
• Collaborate with the engineering team to perform quality checks, troubleshoot issues, and ensure proper functionality of communication systems.
• Conduct tests, inspections, and evaluations of communication equipment and systems to verify compliance with specifications and industry standards.
• Document test results, generate reports, and maintain accurate records of all testing and commissioning activities.
• Assist in the installation, configuration, and maintenance of communication systems as required.

Requirements:

• Educational qualification in Electrical Engineering, Telecommunications Engineering, or a related field.
• Prior experience or knowledge in testing and commissioning of communication systems is preferred.
• Strong analytical and problem-solving skills with attention to detail.
• Excellent communication and interpersonal skills to collaborate effectively within a team environment.
• Ability to work independently, prioritize tasks, and meet deadlines.
• Proficiency in relevant software tools and testing equipment.

We offer competitive compensation and benefits packages, along with opportunities for professional growth and development. Join our team and be part of a company at the forefront of communication system advancements.

To apply, please submit your resume, cover letter, and any relevant certifications to [[email protected]]. Kindly include "Assistant Engineer" in the subject line.

We appreciate all applications, but only shortlisted candidates will be contacted for further consideration. Thank you for your interest in joining our team.

Job title

Building Maintenance Technician

Company

BRILLIANT ENGINEERING PTE LTD

Location

Singapore

Salary and Benefits

Up to $2,800.00 per month

Supplemental Pay: Overtime pay

Job type

Full-time, Permanent

Job description

Responsibility:

- Perform Preventative Maintenance and ensure all M&E system operate efficiently and conform to operating standards

- Attend to urgent complaints and repair work on Air-conditioning and M&E system

- Daily update on work progress to supervisor in charge

- Comply with company safety procedures

- Any other duties as assigned

Requirement:

- Willing to travel around site and work overtime when required

- Must be physically fit and able to climb ladder

- Candidate with no experience are welcome to apply

- Your CV with current and expected salary, notice period (they are a must)

Job Description & Requirements

- Assisting Manager and Engineer with all the admin works

- Prepare quotation or maintenance schedule.

- Prepare costing.

- Fill up daily services reports (filing, invoicing, quotations, etc.)

- Sort out quotations from suppliers.

- Assist tender admin work.

- Preferred, but not necessary, with some experiences working in Air-conditioning service or Project Company.

Office located at No.2 Serangoon North Ave 5, #08-01 Singapore 554911

* Only selected candidate will be contacted

Job Description

• General administrative work, including data entry, filing, prepare cheque requisition.
• Assist in preparing incoming and outgoing letters, mails and sorting out mailers, bills, etc.
• Arrange and requisite pantry refreshments, stationary, office items, etc.
• Arrange and register courses for staff and workers.
• Updating staff and workers records,
• Arrange dormitory check in and check out for workers.
• Prepare master list for Drawings, Documents, incoming & outgoing correspondences.
• Submission of documents, drawings, letter and creating transmittal.
• Maintain proper organisation of filing system, storage of documents and information.
• Keep electronic filing and archive system for easy issuance, storage, retrieval and management of documents to internal and external parties.
• With or without experience, motivated and willingness to learn on the job.

Job Requirements

• Proficient in Microsoft Office with an eye for details
• Min 1-2years of relevant working experience
• Candidate with Document controller experience in a project managment environemnt is a plus
• Proactive, responsive and attentive to project requirement
• Location (Site base)

If you are not invited for an interview within 4 weeks, we regret that your application was not suited to this vacancy.

For more company information, please feel free to visit: http://www.stecs.com.sg/

Personal data collected will be used for recruitment related purposes only and will be destroyed after 12 months.

Job Description

• Perform process design for chemical plants, storage terminals, industrial waste facilities in basic design, FEED and detailed engineering stage.
• Responsible for developing process engineering deliverables including PFD, P&ID, calculation reports, heat and mass balance, system descriptions, line list, simulation model, utility consumption list, process control philosophy, etc in accordance with project requirement and applicable codes/standard.
• To carry out process calculations such as hydraulic calculation, surge analysis, heat transfer calculation, pressure relief and blowdown analysis, utility consumption calculation, equipment sizing, etc.
• Develop firefighting design philosophy, fire water/foam demand calculation and fire water/foam network hydraulic simulation as per local regulation and international code/standard.
• Develop design basis and UFD for utility supply system and wastewater handling system.
• To participate in design review, Process Hazard Analysis, SIL Studies, 3D Modeling review and prepare close-out reports when required.
• Work closely and co-ordinate with other engineering disciplines for preparation of process deliverables and provide process parameter input as required.
• Provide regular update to Lead Process Engineer, Process Manager and Engineering manager on process related technical and engineering issues.

Requirements:

• Bachelor’s Degree in Chemical,Process Engineering or equivalent
• Team player with strong analytical and communication skills
• Minimum 3 years of experience in oil & gas/petrochemical/water treatment /chemical plants
• Fresh Graduates are also welcome to apply

Job Description:

• Handles general office administration at project site.
• Maintain updated workers’ site record and leave records.
• In-charge of workers’ dormitory lounge and logistics.
• In-charge of workers’ course safety enrollment as/ when required.
• Handles workers’ time card for payroll purposes and to be submitted to head office in timely manner.
• Maintain updated fixed assets record on-site.
• Maintain and order office supplies and stationeries in monthly basis.
• Maintain and order office pantry supplies in monthly basis.
• Handles ad-hoc related duties as/ when required.

Requirements:

• Candidate must possess at least Higher secondary/Pre-U/A level/College in Business Studies/Administration/Management or equivalent.
• Required language(s): English, Mandarin (In order to liaise with the English, Mandarin speaking associates)
• At least 3 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): office administration

If you are not invited for an interview within 4 weeks, we regret that your application was not suited to this vacancy.

For more company information, please feel free to visit: http://www.stecs.com.sg/

Personal data collected will be used for recruitment related purposes only and will be destroyed after 12 months.

Engineering Assistant (Assembly/AutoCAD/Technical Drawing)

Responsibilities:

• Perform and ensure that assembly builds and test are completed as scheduled and according to required specifications, drawings and work instruction.
• Report and assist Engineers in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.
• Other ad-hoc duties

Requirements:

• Min NITEC/ Diploma in Mechanical, Mechatronics Engineering or its equivalent
• Able to comprehend schematic/Technical drawing
• Experience in Orbital Welding and/or gas tungsten arc welding (GTAW), is an advantage.
• Able to commit rotating shifts

Interested applicants please submit your resume to [email protected]

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Forecast , Plan and schedule production orders.
• Material planning, Requisition of materials and maintenance of factory materials.
• Responsible for order confirmation based on material and capability availability.
• Plan, control and coordinate with purchasers on material deliveries to avoid high stock inventory.
• Monitor material availability for production continuity.
• Periodically reporting.
• Diploma/ degree holder in Supply Chain Management.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Forecast , Plan and schedule production orders.
• Material planning, Requisition of materials and maintenance of factory materials.
• Responsible for order confirmation based on material and capability availability.
• Plan, control and coordinate with purchasers on material deliveries to avoid high stock inventory.
• Monitor material availability for production continuity.
• Periodically reporting.
• Diploma/ degree holder in Supply Chain Management.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified

Job Responsibilities

• Assist the Senior Project Engineer and Project Manager in execution of Project Management, Project Schedule, and Coordination with sub-contractors
• Engaging in project engineering of ACMV Systems
• Managing project timelines and budgets, coordinating with contractors and subcontractors, and overseeing the installation and commissioning of HVAC systems
• Conducting site visits and inspections to ensure that work is being completed according to specifications and quality standards
• Providing technical support and troubleshooting assistance to clients and project teams, and resolve any issues that arise during the project lifecycle
• Maintaining accurate project documentation including drawings, specifications, and project reports
• Ensure project delivery according to dateline given, ensure cost control and profitability of project
• Assist in site administration
• Preliminary design and budgeting for Design and Build tenders

Job Requirements

• Min. 2 years of related working experience in ACMV works
• Diploma in Mechanical Engineering or equivalent
• Strong technical knowledge of HVAC systems, including equipment selection, load calculations, and ductwork design
• Familiarity with local building codes and regulations related to HVAC systems
• Good project management skills, including the ability to manage timelines, budgets, and resources effectively
• Strong communication and interpersonal skills, with the ability to work collaboratively with clients, contractors and project teams
• Proficiency in AutoCAD and other design software
• Strong analytical and troubleshooting skills

Job Responsibilities:

• Study and analyse tender documents
• Assist in measurements and Bills of Quantities (BOQ), material take-off, when required.
• Prepare Tender & Contract documents
• Attend tender interviews /meetings and liaise with main contractors, subcontractors and project team
• Responsible for administration of project budget, cost control and sub-contract and main-contract including Variation Order (VO) and settlement of final accounts
• When required, to carry out material take-off
• Attend site show-round to investigate site conditions, engineering and technical matters to achieve higher accuracy in BOQ.
• Source for Sub-Contractors/Suppliers
• Compilation of quotations, comparison of quotes, review of prices, selection of competitive prices and summarising subcontracts, materials and equipment
• Co-ordinate with clients, consultants, subcontractors and suppliers to clarify technical matters to support/assist tendering process.
• Evaluate submission of bonds/warranties from subcontractors
• Assist in project procurement & cost control reporting, PO award and PO administration to final delivery and receiving of materials.
• Assist in Sourcing, evaluation and negotiation with specialist, suppliers and subcontractors
• Assist in preparation of variation orders
• Assist in Preparation and follow up monthly progress claims in timely manners
• Assist in finalisation of project accounts with client and subcontractors
• Other project and non-project duties as assigned by Superior

Requirements:

• Minimum Diploma or Degree in Electrical Engineering
• At least 3-5 years of relevant working experience as Electrical QS (Tender of Project) for the M&E Sector.
• Independent with excellent problem-solving skills, detailed and a good team player
• 5 days work week at HeadQuarter (Ubi)
• Positive working attitude
• Meticulous and detailed in work

Civil Engineer

East side project

Min 3 years construction experience

Projects

(Utility diversion, trunk sewer, cycling path, bus facility works, Carparks, Tunnels)

Preferrable with LTA projects experiences in the past

Primary Objective

Manage all aspects of an engineering project, form start to finish, so that it is completed on time and within budget.

Prepare project schedule, method statement, and follow up drawing

Plan, support and attend to site works progress, safety conducts, works procedure and quality.

Liaising with Project Manager & Director, LTA & government authorities, sub-con, clients & consultants.

Key Activities

• Design, communicate and implement an operational plan for completing the project
• Monitor progress and performance against the project plan
• Take action to resolve operational problems and minimize delays
• Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
• Developing project schedules, budget, and forecasts; and selecting materials, equipment, and external contractors
• Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
• Select, and manage the activities of outside contractors to ensure they are integrated into the project and that the organization receives satisfactory standards of service
• Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
• Set priorities, allocate tasks, and coordinate project staff to meet projects targets and milestones.
• Ensure smooth authority submission.
• Solve technical issue such as drawing discrepancy, site condition changes etc.;
• Checking plans, drawings and quantities for accuracy, raise RFI when necessary;
• Ensure accuracy of setting out, levelling and site surveying;
• Ensuring that all materials used and work performed are as per specifications;
• Managing, monitoring and interpreting the contract design documents supplied by the client or architect;
• Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project;
• Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws;
• Liaising with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress;
• Overseeing quality control and assist safety department to achieve health and safety target on site;
• Preparing method statement, daily weekly report. Assist preparing monthly report;
• Raise the issue to Project Manager or Project Director if there is any unexpected technical problems, make feasible suggestion to solve the problem;
• Ensuring all site inspection and record as per client/developer requirement
• Ensuring all testing and quantity inspection are carried out as per contract requirement.

Requirement

1. BCA recognized Degree in Civil Engineering
2. Min 3 years Earthworks, Civil engineering working experiences, preferrable with LTA projects related

• Report to the Project Manager.
• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• To assist Project Manager on the day-to-day management of the site.
• Lead site teams.
• Need to draw using autocad if any design urgent works.
• Site supervision, establishment of daily reporting, planning and scheduling of daily activities, coordinate subcontractors, etc.
• Establish good relationship with all relevant party.
• Ensure site safety & compliance to authorities’ requirements.
• Ensure Site required documents are in good order.
• Control the contractors work and quality of work for site in field.
• Measure and Estimate of contractor work and report to Project Manager.
• Manage day-to-day on a construction site and the main source of technical advice and quality control for everyone working on it.
• Checking drawings and quantities and ensuring the accuracy of calculations.
• Will be responsible for overall project management and delivery of the project including planning, scheduling and execution.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.

• Taking off/ measurement of quantities.
• Estimating and Tendering.
• Project Procurement, Purchasing & Budgeting.
• Assist QS manager in managing all aspects of the contractual and financial side of construction projects.
• Project Progress Claims, Variations and Final Accounts.
• General contracts administration, including payment, claims and V.O.
• Negotiation with subcontractors / suppliers, based on good knowledge of market rates.
• More experienced candidates may be offered a Senior role.

Interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Manage Purchases and delivery of materials meeting the MRP for smooth supplies to Operations.
• Monitor and expedite deliveries to avoid delinquency and shortage of materials.
• Process Purchase Request and Issue Purchase Order timely and negotiate shorter lead time & lower prices.
• Analyse the stock inventory and plan for replenishment or push out of Orders.
• Manage and track supplier OTD with timely report and assessment (weekly & Monthly Report)
• Develop an efficient and accurate system for monitoring all open purchase orders.
• Sourcing of parts, materials, consumables and equipment when required to meet the specifications, price and delivery time line.
• Ensure all purchase data and receipt are reconciled with timely update for payment.
• Source & Manage Approved Vendor, maintain and update the list with suppliers selection approval and their performance.
• Solve and manage all purchasing related problems and escalate timely to avoid stoppage of supplies and cost avoidance.
• Formulate, review and update SOP to continuous improve the supply chain work flow and meet any ISO requirements.
• Other ad-hoc tasks as assigned by Department Manager from times to times.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Full spectrum of Drafting support to Project Teams.
• Co-ordination and monitoring of drawing submission to Main Contractor.
• Maintain Drawings listing in accordance to ISO Quality standard.
• Preparation & drafting of architectural shop drawings as per design drawing intend, in accordance to standards.
• Revised and updated commented shop drawings.
• Liaise and coordinate with subcontractor and client on drawing and site issue.
• Good AutoCad knowledge.
• Knowledge of MicroStation or Rivet MEP and CSD Drawings will be an added advantage.
• Ability to work independently in a challenging environment.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Overall management for the project with respect to contractual, budget, resources, design, procurement, construction, quality and safety.
• Lead the project team for the implementation and execution of works as according to planned schedule.
• Coordination and monitoring of progress amongst various subcontracting works.
• Liaise closely with clients, architects, consultants, subcontractors through regular meetings to resolve administrative, design and contractual issues and updating of project progress report.
• Conduct regular site safety meeting and to implement safe site working condition and environmental control measures.
• Tender in Building projects.
• Method Statement.
• Technical Submission.
• Evaluation.
• Experience in Commercial, Building projects.
• Posses good leadership and organizing abilities.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.

Responsibilities

• Preparation, checking and submission of drawings, catalogues and calculations for the assigned project.
• Assist Project Manager/Sr. Engineer for preparation of Vender approval submission
• Prepare and update project schedules
• Work out bill of materials and engineering deliverables.
• Attend progress/ technical meetings.
• Execution of project in accordance with general specifications, particular specifications, technical specifications and drawings, etc.
• Effective communication between engineering, technical, construction, and project control groups.
• Co-ordinate with clients, consultants, subcontractors and suppliers to ensure timely delivery of works.
• Co-ordinate with subcontractors, suppliers and own teams for implementation of the projects and ensuring it is being built correctly.
• Contributes to team effort by accomplishing related results as needed.
• Monitoring and carrying out quality check on progressive completed work.
• Develop method of statements and testing procedures for the works.
• Inspect installations and observe operations to ensure compliance with design and equipment specifications and safety standards.
• Write reports and documentations.

Requirements

• Diploma / Degree in Electrical Engineering
• 3 years of working experiences in electrical installation in industrial plants
• Technical skills and knowledge of HT, LT Switchboards, Transformers, Generators, Motor Starters, Testing and Commissioning
• Familiar with relevant Singapore standards and international standards.
• Positive working attitude and ability to work in a fast-paced environment
• Meticulous with an eye for detail
• Salary will commensurate with experience
• Fresh graduates welcome

Civil Engineer

East side project

Min 3 years construction experience

Projects

(Utility diversion, trunk sewer, cycling path, bus facility works, Carparks, Tunnels)

Preferrable with LTA projects experiences in the past

Primary Objective

Manage all aspects of an engineering project, form start to finish, so that it is completed on time and within budget.

Prepare project schedule, method statement, and follow up drawing

Plan, support and attend to site works progress, safety conducts, works procedure and quality.

Liaising with Project Manager & Director, LTA & government authorities, sub-con, clients & consultants.

Key Activities

• Design, communicate and implement an operational plan for completing the project
• Monitor progress and performance against the project plan
• Take action to resolve operational problems and minimize delays
• Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
• Developing project schedules, budget, and forecasts; and selecting materials, equipment, and external contractors
• Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
• Select, and manage the activities of outside contractors to ensure they are integrated into the project and that the organization receives satisfactory standards of service
• Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
• Set priorities, allocate tasks, and coordinate project staff to meet projects targets and milestones.
• Ensure smooth authority submission.
• Solve technical issue such as drawing discrepancy, site condition changes etc.;
• Checking plans, drawings and quantities for accuracy, raise RFI when necessary;
• Ensure accuracy of setting out, levelling and site surveying;
• Ensuring that all materials used and work performed are as per specifications;
• Managing, monitoring and interpreting the contract design documents supplied by the client or architect;
• Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project;
• Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws;
• Liaising with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress;
• Overseeing quality control and assist safety department to achieve health and safety target on site;
• Preparing method statement, daily weekly report. Assist preparing monthly report;
• Raise the issue to Project Manager or Project Director if there is any unexpected technical problems, make feasible suggestion to solve the problem;
• Ensuring all site inspection and record as per client/developer requirement
• Ensuring all testing and quantity inspection are carried out as per contract requirement.

Requirement

1. BCA recognized Degree in Civil Engineering
2. Min 3 years Earthworks, Civil engineering working experiences, preferrable with LTA projects related

.Responsible for assisting Project Manager to plan, manage and ensure smooth implementation and monitor of projects assigned from inception to completion on time and of desired quality.

· To coordinate with clients, sub-contractors and workers on all project aspects to ensure smooth and complete on time.

· To report the progress and quality of the overall project.

· Ensure that all Safety compliances and processes are adhered to by all workers.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.

• Assist to coordinate & build the model of architectural elements.
• Manage and deliver appropriate visuals (VDC) and shop drawing to support construction work.
• Coordinate with consultants and other trades representatives to resolve clashes / interfacing issues.
• Coordinate and oversee the extraction of key data from project model for quantity take-off, logistics, etc.
• Interface with project planner to create 3D or 4D model.
• Liaise with document controllers for accurate data transfer.
• Interface with peers of their discipliners to resolve basic modelling issues.
• Able to assist on documentation for record and submission related to BIM processes.
• Able to handle different scales of projects concurrently..

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.

• Report to the Project Manager.
• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• To assist Project Manager on the day-to-day management of the site.
• Lead site teams.
• Need to draw using autocad if any design urgent works.
• Site supervision, establishment of daily reporting, planning and scheduling of daily activities, coordinate subcontractors, etc.
• Establish good relationship with all relevant party.
• Ensure site safety & compliance to authorities’ requirements.
• Ensure Site required documents are in good order.
• Control the contractors work and quality of work for site in field.
• Measure and Estimate of contractor work and report to Project Manager.
• Manage day-to-day on a construction site and the main source of technical advice and quality control for everyone working on it.
• Checking drawings and quantities and ensuring the accuracy of calculations.
• Will be responsible for overall project management and delivery of the project including planning, scheduling and execution.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.

1) Manufacturing sector experience is preferred.

2) Handle Day to day enquiries (phone/email/fax) and support Management & Production team.

3) Coordinate Between Production team and Office management team.

4) Update the company polices as needed.

5) Book flight tickets and make travel arrangement for workers and staffs.

6) Prepare master list for Drawings, Documents, incoming & outgoing correspondences.

7) Submission of documents, drawings, letter and creating transmittal.

8) Maintain proper organisation & production of filing system, storage of documents and information.

9) Keep electronic filing and archive system for easy issuance, storage, retrieval and management & production of documents to internal and external parties.

10) Schedule meeting with production team & management team.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]