Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

The Pre-Sales Manager (Cybersecurity) manage the pre-sales team and supports the sales team by providing technical expertise and product demonstrations to potential customers. This role ensures that the cybersecurity products meet customer needs and helps drive sales.

Job Description

• Develop proposal for the tenders/bids.
• Experience in overall design for network and security solutions.
• To prepare and deliver the business value solutions for customers, including proposal writing, presentation, conduct, proof-of-concept to showcase its technical feasibility when necessary.
• Work closely with the product management team to ensure proper customer solution positioning and respond to technical aspects of RFPs/RFIs.
• Arrange technical training for clients and sales teams, and conduct proof of concepts, solution designs, and technical workshops.

Requirements

• At least 3 – 5 years of working experience with knowledge of product pre-sales.
• Preferably having formal experience in pre-sales, post sales, delivery team in a tech industry.
• Familiar in the project methodologies such as Planning, Design, and relevant Technologies
• Excellent written and verbal communication skills to explain complex technical concepts in simple terms.
• Possess in-depth knowledge of current technologies, tools, methodologies and industry trends, Government guidelines.
• Possess relevant professional certification like CISSP would be an added advantage.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description:
As a Project Supervisor for Fire Alarm Projects, you will be responsible for overseeing the successful installation, maintenance, and servicing of fire alarm systems. You will manage the day-to-day operations of fire alarm projects, ensuring they are completed on time, within budget, and in compliance with safety standards and regulations.

Key Responsibilities:

• Supervise and lead a team of technicians and installers during fire alarm projects.
• Plan, coordinate, and schedule fire alarm installation and maintenance work.
• Ensure compliance with all local fire safety regulations, standards, and codes.
• Manage project budgets, timelines, and resources effectively.
• Communicate with clients to provide updates, address concerns, and ensure satisfaction.
• Conduct site inspections and monitor the quality of work to ensure the highest standards.
• Troubleshoot and resolve technical issues as they arise during the project lifecycle.
• Maintain accurate documentation of project progress, inspections, and reporting.

Qualifications:

• Proven experience in supervising fire alarm installation or related projects.
• Strong understanding of fire alarm systems, safety codes, and regulations (e.g., NFPA standards).
• Excellent leadership, organizational, and communication skills.
• Ability to manage multiple projects and teams simultaneously.
• Strong problem-solving skills and attention to detail.
• Previous experience in budgeting and resource allocation is preferred.
• Relevant certifications in fire alarm systems or safety are a plus (e.g., NICET).
• Ability to work in both office and field environments, as needed.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for career advancement and professional development.
• A dynamic, supportive, and collaborative work environment.

How to Apply:
If you are a dedicated and skilled professional with a passion for fire safety and project management, we would love to hear from you! Please submit your resume and cover letter to [email protected]. We are looking forward to having you join our team!

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

Responsibilities :-

• Oversee the overall execution & construction of the ERSS competently &
• Professionally & conversant in the statutory requirements of Building Control Act.
• Co-ordinate and monitor projects
• Ad-hoc duties as assigned by the Superior
• Resolve problems arising at sites and attend site meetings
• Respond to all email correspondence and claim submission within timelines

Requirements :-

• Possess basic Degree in Civil Engineering (with recognized institutions) &
• Construction Safety Course.
• Minimum 5 years in Project Management experience is desired.
• Good command in both written & spoken in English.
• Self-motivated and committed to works.
• 5.5 days week.
• Possess valid Class 3 driving license & own transport is preferred.

Job Description:

- Assist HOD and supervise a team of technicians in delivering technical advices/ support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

- Read Manual and Engineering Drawing for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the MRO tasks allocated to the section in supporting commercial products, company's proprietary and non-proprietary Army products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches, studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Degree in Mechanical/Mechatronic Engineering

- Experience in Component MRO in related industries

- Experience in effectively leading a team of Technicians

- Experience in SAP System is advantageous

- Knowledge in Army systems will be an added advantage

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting Engine, Transmission or Gearboxes

- Competent in Mechanical/Mechatronic system

- Familiar with components testing

- Ability to read and interpret Engineering Drawing and datasheets

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

- Good analytical and problem-solving skill

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as an integrated engineering group, spanning across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

About The Role:

Prepare & help provide quotations to customers

• Communicate with customer on the requirements, understand their procurement process to ensure smooth sales process
• Key into sales portal the opportunity
• Chase the pricing from vendors/suppliers
• Prepare the costing sheet & actual quotation before sending out to customer

Support the sales team during bid process

• Download or gather the tender document from portal
• Prepare submission template
• Gather information to be included into the tender submission
• Chase the pricing from vendors/suppliers
• Assist in tender submission into the portal / tender box

Assist & help resolves customer queries

• Communicate with customer on requirements
• Coordinate technology sharing session with customer in order to generate new sales lead
• Good organization skills & the ability to multitask is a plus point

Staying informed about cybersecurity product and services

• Require to attend product sharing & technology update
• Able to explain & demonstrate features of technology products and services
• Able to answer customers' queries and send additional information via email
• Able to upsell products and services

Requirements:

• Previous experience in related tech/IT industry preferred
• Excellent communication skills, both verbal and written
• Good organization skills and ability to multitask
• Proficiency in Microsoft Office eg. Excel to develop the cost/price
• Proficiency in CRM software such as salesforce.com
• Singaporean only

Work location: near Jurong East MRT

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

· Oversee and direct construction projects from conception to completion

· Review the project in-depth to schedule deliverables and estimate costs

· Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations

· Coordinate and direct construction workers and subcontractors

· Select tools, materials and equipment and track inventory

· Meet contractual conditions of performance

· Review the work progress on daily basis

· Prepare internal and external reports pertaining to job status

· Plan ahead to prevent problems and resolve any emerging ones

· Negotiate terms of agreements, draft contracts and obtain permits and licences

· Analyse, manage and mitigate risks

· Ensure quality construction standards and the use of proper construction techniques

· More than 5 years working experience in construction management

· Advanced knowledge of construction management processes, means and methods

· Expert knowledge of building products, construction details and relevant rules, regulations and quality standards

· Understanding of all facets of the construction process

· Familiarity with construction management software packages

· Competent in conflict and crisis management

· Leadership and human resources management skills

· Excellent time and project management skills

· Minimum BS degree in construction Engineering

· Delivery, loading and unloading of deliverables.

· Receiving, checking, and packing of goods.

· Tallying goods with delivery orders before loading

· Assist with loading and unloading items from vehicles

· Ensure timely delivery of logistical items

· Maintain cleanliness of company vehicles and equipment

· Upholding service standard and professional image of company

· Maintaining courteous manner with all customers, vendors and colleagues

· Submit signed delivery orders to company daily

· Any ad-hoc tasks as required by Supervisor

Job Requirements:
- Possess valid Class 3 driving license is required
- Physically fit in order to carry heavy objects
- Independent and able to take initiative
- Good coordination and organisation skills
- Possesses good time management
- Able to work well in a team
- Willing to work weekends and overtime when needed- Familiar with Singapore roads and landmarks – clean driving records, diligent with good attitude

- Candidates with class 4 and forklift license is an added advantage

- Able to read English

- Able to perform with minimal supervision

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Job Description & Requirements

The Corporate Quality Environmental Safety and Health Officer

• Inspect projects and provide advisory role to project team to eliminate potential hazards.

• Advise on risks arising from the workplace or processes at work, suggests measures to stop or tightly control all risks from happening.

• Preventing or lowering health and environmental risks, and improving quality of processes.

• Assisting the Company with ISO Certification involving ISO 9001, ISO 14001 & ISO 45001.

• Assisting projects with Consass Audit every 6 month.

• Conducting Internal Audit to projects to ensure compliance to ISO 9001, ISO 14001 & ISO 45001.

• Conducting Internal GGBS audit & maintaining Company’s GGBS certification

• Maintaining & revising IMS manual, Procedures & Safety, Health, Environment Management System Manual (SHEMS)

• Developing and revising Risk Assessment and Safe work procedures.

• Applying & maintaining BizSafe status of the Company

• Applying for WSH Awards from WSH Council

• Conduct QESH training to projects

• To attend to Client’s and Authority’s (MOM) inspection

• To organize programs related to Total WSH program by WSH Council

• To assist in providing safety related documents for Tender submission.

• Collating monthly safety performance statistics from all projects

• Conduct Monthly QESH meeting to all projects to share the safety performance of all the projects for continual improvement & to include evidences in the yearly MR Meeting.

Organized and detail-focused individual to assist with the transition of procurement operations into the ERP system. This role involves converting current Purchase Requisitions (PRs) into digital Purchase Orders (POs) and supporting the creation and management of part numbers in the new system.

Key Responsibilities:

Data Entry:

• Enter and convert existing PRs into digital POs within the ERP system.
• Ensure all data entries are accurate, complete, and aligned with procurement standards.
• Maintain proper documentation and tracking of converted PRs and POs.

Part Number Creation:

• Assist in the creation and verification of part numbers in the ERP system.
• Ensure correct categorization and formatting of part numbers as per company guidelines.
• Coordinate with relevant teams to validate part descriptions and specifications.

Record Maintenance:

• Update procurement records and ensure consistency between physical and digital files.

Job Description

A project manager is responsible for the direction, coordination, implementation, executive, control and completion of the project while remaining aligned with the strategy, commitments and goals of the organization.

Responsibilities

· Plan and implement projects

· Help define project scope, goals and deliverables

· Define tasks and required resources

· Collect and manage project team

· Manage budget

· Allocate project resources

· Create a schedule and project timeline

· Track deliverables

· Support and direct team

· Lead quality assurance

· Monitor and report on project progress

· Present to stakeholders reports on progress as well as problems and solutions

· Implement and manage change when necessary to meet project outputs

· Evaluate and assess the result of the project

Qualifications

· Excellent communication skills

· Problem-solving and leadership skills

· Project planning, risk management, time management and other project management skills

· Project management qualification (PMP), Certified Associate in Project Management (CAPM), or equivalent experience as a project manager

· Experience in strategic planning, risk management and/or change management

· Proficiency in project management software tools

· Contract negotiation

· Conflict resolution experience

• Assist and work with day to day production administrative works and operations of the Production/Processing Department by Engineer/Manager/Supervisor
• Support production operations functions with expert administrative support to the entire Production Team.
• Attend to production inquiries, calls, and email
• Responsible for updating and maintaining data and reviewing production records and orders.
• Responsible and maintain a proper record, filing for each department documents archival
• Issue of drawings to the relevant department for production
• Prepares purchase orders by verifying specifications and price
• Obtaining recommendations from suppliers for substitute items
• Obtaining approval from requisitioning department
• Assist to get supplier quotation
• Handle customer quotation enquiries
• Follow up on the on-going projects
• Co-ordinates on production schedule
• Data entry to ERP system, filing, photocopy and scanning
• Meticulous and organized with good time management
• Able to work in a fast-paced environment
• Proficiency in MS Office
• Strong written and verbal communication skills and the ability to multitask a high volume of tasks
• Ability to handle a very active desk supporting numerous simultaneous productions

Job brief

We are looking for an experienced Production Manager to organize and oversee the manufacturing of goods. You will be ultimately responsible for the smooth running of all production lines and the quality of output.

We expect you to have deep know-how in production procedures. Ability to direct personnel towards maximum performance will set you apart as a leader. Decision-making and problem-solving will take up a great part of your day. If you are up to it, we’d like to talk to you.

The goal is to ensure an efficient and productive manufacturing process that meets customer requirements.

Responsibilities

· Liaise with other managers and management to formulate objectives and understand requirements

· Estimate costs and prepare budgets

· Organize workflow to meet specifications and deadlines

· Monitor production to resolve issues

· Supervise and evaluate performance of production personnel (quality inspectors, workers etc.)

· Determine amount of necessary resources (workforce, raw materials etc.)

· Approve maintenance work, purchasing of equipment etc.

· Ensure output meets quality standards

· Enforce health and safety precautions

· Report to upper management

Requirements and skills

· Proven experience as production director

· Deep knowledge of production management

· Understanding of quality standards and health & safety regulations

· Knowledge of performance evaluation and budgeting concepts

· Experience in reporting on key production metrics

· Proficient in MS Office and ERP software

· Outstanding communication ability

· Excellent organizational and leaderships skills

· Attention to detail

· Strong decision-making skills and a results-driven approach

Job brief

We are looking for a qualified Production Planner to organize production according to demand and quality standards. You will be the one to ensure our goods are produced on time for distribution in a profitable manner.

An excellent production planner is well-versed in production procedures and ways to optimize them. They are organized and results-driven with great problem-solving skills. Advanced communication and computer skills are very useful for the role.

The goal is to ensure the smooth and cost-efficient flow of our production operations.

Responsibilities

· Coordinate production workflow for multiple products

· Planning and prioritize operations to ensure maximum performance and minimum delay

· Determine manpower, equipment and raw materials needed to cover production demand

· Assign workers and other staff to particular production operations

· Schedule shift according to production needs

· Monitor jobs to ensure they will finish on time and within budget

· Address issues when they arise aiming for minimum disruption

· Obtain output information (number of finished products, percentage of defectives etc.)

· Prepare and submit status and performance reports

· Keep paperwork organized

· Collaborate with quality control, warehouse and other staff

Requirements and skills

· Proven experience as production planner

· Excellent knowledge of production planning and quality control principles

· Experience in MRP II (Manufacturing resource planning)

· Working knowledge of MS Office and ERP systems

· Good at math and statistics

· Strong organizational and problem-solving skills

· Excellent communication abilities

Job brief

We are looking for a skilled Welder to cut and join metals and other materials at our facilities. You will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Your job is important as it provides the foundation for strong infrastructure.

A welder must be competent in using potentially dangerous equipment following all safety precautions. The ideal candidate will also have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is essential.

Responsibilities

• Read blueprints and drawings and take or read measurements to plan layout and procedures
• Determine the appropriate welding equipment or method based on requirements
• Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements)
• Operate angle grinders to prepare the parts that must be welded
• Align components using calipers, rulers etc. and clamp pieces
• Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)
• Repair machinery and other components by welding pieces and filling gaps
• Test and inspect welded surfaces and structure to discover flaws
• Maintain equipment in a condition that does not compromise safety

Requirements

• Proven experience as welder
• Experience using a variety of welding equipment and procedures (TIG, MMA etc.)
• Experience in using electrical or manual tools (saws, squares, calipers etc.)
• Ability to read and interpret technical documents and drawings
• Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
• Deftness and attention to detail
• Proficient in English
• Successful completion of a relevant apprenticeship program is required
• Professional Certification (e.g. an AWS welding certificate) will be a plus

Job Description & Requirements

The Corporate Quality Environmental Safety and Health Officer

• Inspect projects and provide advisory role to project team to eliminate potential hazards.

• Advise on risks arising from the workplace or processes at work, suggests measures to stop or tightly control all risks from happening.

• Preventing or lowering health and environmental risks, and improving quality of processes.

• Assisting the Company with ISO Certification involving ISO 9001, ISO 14001 & ISO 45001.

• Assisting projects with Consass Audit every 6 month.

• Conducting Internal Audit to projects to ensure compliance to ISO 9001, ISO 14001 & ISO 45001.

• Conducting Internal GGBS audit & maintaining Company’s GGBS certification

• Maintaining & revising IMS manual, Procedures & Safety, Health, Environment Management System Manual (SHEMS)

• Developing and revising Risk Assessment and Safe work procedures.

• Applying & maintaining BizSafe status of the Company

• Applying for WSH Awards from WSH Council

• Conduct QESH training to projects

• To attend to Client’s and Authority’s (MOM) inspection

• To organize programs related to Total WSH program by WSH Council

• To assist in providing safety related documents for Tender submission.

• Collating monthly safety performance statistics from all projects

• Conduct Monthly QESH meeting to all projects to share the safety performance of all the projects for continual improvement & to include evidences in the yearly MR Meeting.

Roles & Responsibilities

Job Scope:

• Submit plan and execute well-defined sales strategies to achieve targets;
• Develop and maintain good rapport with existing customers;
• Promptly and professionally attend to customers’ enquiries and requests and provide technical advise on both existing and new products or systems;
• Supports sales opportunities through presentations, calling and visiting customers and prospects, needs identification with active follow-ups;
• Ensuring smooth service operation efficiency for customers with sales and operations team
• Investigating and resolving customers’ issues with relevant departments when necessary
• Acquire new customer accounts;
• Assist in preparation of proposals and quotation administration;
• Contribute creative alternative ideas to help maximize sales opportunities;
• Participate in marketing, advertising, promotional and publicity activities in line with corporate and product strategies;
• Gather information on market demand, competition and latest product developments
• Conduct periodic sales forecasts;
• Prepare weekly sales/contact reports.

Requirements:

• Diploma/Degree in Mechanical/Civil Engineering other Engineering related
• 3 to 5 years of Experience
• Possess Class 3 driving license (with own transport preferred)
• Excellent communication, interpersonal and presentation skills;
• Possess an outgoing personality;
• Resourceful, proactive self-starter, positive attitude, performance oriented, able to work independently but also a team player;
• Must be able to read and write fluently in English & Mandarin
• Able to speak Mandarin p

Key Responsibilities:

• Assist in entering purchase invoices and maintaining daily transaction records for completeness.
• Support COA mapping between NAV and Oracle NetSuite.
• Help extract data from individual work orders to verify product costing.
• Perform administrative tasks such as scanning hardcopy invoices, filing, and archiving as needed.

Job Description & Requirements

• Supervise and lead the construction team to lay down construction milestone.
• Manage construction activities, ensuring timely and smooth progress of the operations.
• Responsible for implementing the work plan and attending project meetings
• Resolve design site problems encountered during the construction period.
• Producing site progress report to management.
• Monitor and ensure subcontractors comply with specified requirements.
• Identify and comply with all applicable statutory/ regulatory requirements related to project.
• Coordination and sequencing of works of different subcontractors.
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.
• Respond swiftly to work delays, emergencies and other problems.
• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• At least 10-15 Year(s) of working experience in the related field is required for this position.
• Preferrable 10-15 years of project management experience in the high rise projects and mixed development in building projects
• Required Skill(s): leadership, technical, planning, coordination, multi-task
• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Responsibilities:

• Produce shop drawings & as-built drawings using BIM modelling creating & managing BIM model.
• Update and coordinate BIM model throughout the project.
• Perform interference/clash checking within own model and /or against other disciplines.
• To deliver all the drawings on time with accurate.
• All other Drafter related jobs.

Job Requirements:

• Diploma or degree certificate in relevant discipline.
• Minimum of 3 year experience as BIM drafter in Singapore construction is required for this position.
• Candidate with LTA projects drafting experience will be an advant age.
• Must be proficient in BIM, Revit, Auto Cad & MS Office Able to interpret engineering drawings and models.

-Knowledge of CNC machining process

-Proficient in MasterCam/Unigraphic Cam/Autocad applications

-Experience in precision metal machining and fabrication

-Produce machined components via conventional machines/CNC machines

-Able to interpret engineering drawings, carry out related manufacturing processes

-Able to operate Multi Axis machines will be an advantage

-Able to document process summary sheet