Nanyang Environment and Water Research Institute, NTU is looking for a Research Fellow with expertise in chemical reactors to develop an improved prototype for a thermocatalytic process.

The project is funded by National Environment Agency, Singapore to address one of the largest problems in waste management – the problem of plastic waste pollution. A significant fraction of plastic waste has substandard quality for mechanical and chemical recycling even after sorting and cleaning. The Research Fellow will work on the design, fabrication and testing of a chemical reactor system that will use pyrolysis-chemical vapor deposition (CVD) technology for converting these plastic waste streams (specifically, contaminated and rejected plastics) into multi-walled carbon nanotubes (MWCNTs) and hydrogen. The role of Research Fellow is to design a system prototype that can effectively mitigate the impact of impurities from diverse plastic waste streams on production outputs and can be operated in a continuous mode.

Key Responsibilities:

The candidate will be undertaking full research work and administrative duties during the term of employment within the following areas:

• Experimental work on plastic waste conversion into carbon nanotubes and hydrogen.
• Design, procurement, installation and operation of the prototype system;
• Investigation of system performance and determining factors that influence the yield and quality of outputs;
• Development of improvements in system design to mitigate the factors decreasing quality and yield of outputs;
• Development of a continuous process;
• Liaising with vendors regarding the feasibility of scale up and conducting a cost-benefit analysis.
• Publishing research papers and documenting developed intellectual property.
• Reporting the progress to stakeholders (internal and external).

Job Requirements:

• Ph.D. degree in a field relevant to chemical reactor engineering (e.g., Chemical Engineering, Thermal Engineering, Mechanical Engineering, Process Engineering or other).
• PhD thesis or postdoctoral experience related to chemical reactor engineering for at least one of the following areas: (a) catalytic reactors, (b) continuous reactors.
• First-author publications in the areas mentioned above.
• High proficiency in English (e.g., TOELF, IELTS, GRE) for preparation of research papers.
• Ability to prepare well-written technical reports and research papers.
• Ability to prepare decent quality presentation decks, figures and illustrations.
• Ability to build formal and informal partnerships and work collaboratively with others to meet shared objectives.
• Ability to consistently achieve results, even under challenging circumstances.

We regret to inform that only shortlisted candidates will be notified.

1. Answering incoming calls, daily checking emails, and retrieving mail from the letter box.

2. Processing of documents (quotations, delivery orders, invoices, purchase orders)

3. Provide administrative support to Project Managers and Engineers.

4. Proper filing and photocopying of documents and admin duties.

5. Order and purchase of office stationeries and equipment maintenance.

6. Any other duties as assigned by the Management.

7.Training will be provided for new entry and interns

Job Description:

• Greet clients and visitors with a positive, helpful attitude.

• Meeting room booking & preparing meeting and training rooms.

• Answering phones in a professional manner, and routing calls as necessary.

• Sorting and distributing mail.

• Provide excellent customer service.

• Run all day-to-day office administrative function at site office.

• Ordering for pantry items and handling office maintenance.

• Assisting on claim submission to finance department.

• Performing ad-hoc administrative duties.

Requirements:

• Associate’s or Diploma in a related field.

• Consistent, professional dress, and manner.

• Excellent bilingual written and verbal communication skills.

• Competency in Microsoft applications including Word, Excel, and Outlook.

• Experience with administrative and clerical procedures.

Job Responsibilities:

• Plan and monitor architectural works from design to construction stage of design & build projects.

• Collaborate with Structural and M&E teams to provide technical directions on design and detail development. Review the architectural design from consultants and subcontractors based on contractual and project specification requirement.

• Prepare, review and monitor architectural works schedule based on the project master program. Regularly provide updates through coordination meetings.

• Attend regular technical meetings related to architectural works through design stage and construction stage.

• Oversee the overall planning of architectural works, site inspections, monitoring of progress of work, variation order and certification of work done for all assigned projects.

• Oversee the monitoring of site to ensure that all architectural works of the project team and subcontractors are in compliance to the defined standards and drawings. Provide technical supports to construction & operation teams

• Review documented technical requirements and project plan to ensure adherence to defined standards

• Support interactions with Client/SO/Government agencies, consultants, subcontractors and project team to ensure smooth delivery of work including resolution of design and construction issues

• Report to Design Manager/ Construction Manager on following up materials, shop drawing preparing from our consultants and subcontractors.

• Provide review and submissions to clients.

• Provide input to the Project Management Team on all architectural related matters

Job Requirements:

• Degree in Architectural Engineering or its equivalent.

• Minimum 5 years of experience after tertiary education in relevant architectural field in the construction supervision of architectural works for projects of similar scale and complexity in local context.

• This role is to ensure all architectural works are carried out as per approved architectural drawings and specifications and all interface details with SWCs works are carried out as per CCSM and Reflected Ceiling Plans.

• Experience with LTA Project is preferable

Responsibilities

1. Compile billing document submit for invoicing
2. Liaise with procurement & supplier for job document (DN, PO).
3. Compile & scan related Job document to system for future reference
4. Liaise with procurement to request quotation from supplier (Raise PR), Perform Good Receive (GRN), Return of Material (ROM)
5. Create Notification, update RFQ, PO received in system.
6. Coordinate with vendor for department facilities maintenance
7. To support all operations administration requirement and any other adhoc assignment.

About this role:

This is a key role in C-level team within the company, directly responsible for leading the overall operations and development of the organization. The role aims to rebuild and optimize the company’s production, operational, and talent systems, driving high-quality growth and sustainable development.

Key Responsibilities:

· Strategic Leadership: Drive the development and execution of the company’s strategic plans, ensuring alignment with its vision, goals, and long-term growth.

· Operational Excellence: Streamline production and operational systems to enhance efficiency, maintain quality, and support scalability.

· Business Innovation: Strengthen the operational framework by fostering innovation in business models to enhance market competitiveness.

· Talent Development: Build a high-performing team through robust talent acquisition, training, and incentive programs.

· Industry Leadership: Lead advancements in the BIM (Building Information Modeling) sector by driving technology adoption and delivering actionable solutions.

· Digital Transformation: Oversee the development and implementation of cutting-edge engineering digitalization strategies.

· Partnership Growth: Cultivate and expand strategic partnerships to increase market share and strengthen brand influence.

· Global Collaboration: Ensure effective cross-cultural communication and collaboration with international clients and partners to drive project success.

Qualifications:

· Core Competencies: Exceptional leadership, strategic thinking, execution capabilities, and resilience under pressure.

· Industry Experience: A minimum of 8 years of experience in executive search, extensive experience in the engineering and construction industry. Experience in leading or participating in successful engineering digitalization projects and BIM technology implementations is a must.

· Management Experience: Proven track record in senior management roles within medium to large enterprises, with the ability to build operation systems and lead teams effectively.

· Technical Expertise: Keen insight into trends in engineering digitalization technologies, with the ability to integrate advanced technologies into the company’s operations.

· Familiarity with international standards and regulations related to engineering digitalization technologies is an advantage.

· Educational Background: Master’s degree or above, preferably in Engineering, Civil Engineering, Information Technology, or related fields.

· Well versed in English and Mandarin, for internal communication with other stakeholders in China.

Responsibilities:

• Oversee the day‐to‐day operations of the machinery service and maintenance service, ensuring efficient workflow and timely completion of repairs.
• Manage a team of skilled technicians, providing guidance, training, and performance feedback.
• Develop and implement preventive maintenance programs to maximize company asset uptime and minimize downtime.
• Schedule and dispatch technicians to customer sites or internal workshops.
• Maintain accurate records of service and maintenance activities, including work orders, parts usage, and labor costs.
• Ensure compliance with safety regulations and industry best practices.
• Contribute to the development and implementation of operational strategies to improve efficiency and profitability.
• Creating development plans and forecasting sales targets and growth projections.
• Identifying leads and market opportunities through meetings, networking, and other channels.

Qualifications:

• Proven experience as an Operations Manager or similar role in the process equipment industry.
• Strong understanding of process machinery, including hydraulics, electrical systems, and diesel engines.
• Excellent leadership and team management skills.
• Strong analytical and problem‐solving abilities.
• Proficient in using Microsoft Office Suite.
• Excellent communication and interpersonal skills.

Responsibilities

• Analyse data on Environment, Health and Safety (EHS) performance, processes and practices.
• Drive, coordinate and implement day-to-day EHS initiatives
• Maintain and improve EHS standards and practices at the workplace.
• Prepare EHS reports on regular basis.
• Promote EHS activities, organise committee meetings and conduct regular training to stakeholders.
• Conduct Safety Inspections, EHS audits and where required, undertake incident investigations.
• Ensure operations compliance with EHS legislations and requirements including subcontractors.
• Maintain EHS Management System documentation.
• Perform statutory roles of Registered WSH Officer

Requirements

• Must be a Workplace Safety & Health Officer registered with Ministry Of Manpower (Singapore).
• Experience and good knowledge of Environment, Workplace Safety & Health Management Systems such as ISO14001 and ISO45001 including and BizSAFE Certification.
• Minimum 2 years’ experience as WSHO in Singapore.
• A team player and have the ambition to excel in EHS discipline.
• Good written and communication skills.
• Possesses initiatives and creativity to drive process improvements.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description

• Assist Construction Manager in daily works.
• Assist Construction Manager to manage and control overall construction activities in all aspects to successfully meet the project specifications and schedules in accordance with the performance requirements and project objectives.
• Assist in evaluating vendors, suppliers, examiners, checkers, sub-contractors, direct supply labour force etc.
• Monitor constructability reviews.
• Select and implement construction procedures most appropriate to the project considering the site conditions and the modular approach.
• Manage the mobilization schedule regarding staff, labour and equipment for the project.
• Oversee and control all construction/fabrication at yards (if applicable), off-site, and on-site.
• Develop the Construction Organization Plan and HSE Program and implement, maintain, track, evaluate, close any post-mortem plans throughout overall project period.
• Organize the construction works among construction team, partners, contractors and external parties, stakeholders.
• Arrange engineers and site supervisors to inspect the construction activities of contractors.
• Coordinate between contractors/fabricators at yard.
• Develop the general construction schedule, and prepare the monthly and weekly schedule, and monitor the implementation of these schedules.
• Facilitate planner to exercise his/her planning/ scheduling works.
• Monitor the schedule to facilitate completion on time.
• Site material control and field engineering.
• Take part in site construction coordination meeting and make sure to any issues.
• Take part in cost control, review the variation claim and monthly progress payment application.
• Facilitate any claim, SOP, arbitration, mediation or any adjudication when requested by management.
• Any tasks or jobs assigned by Management.

Job Requirements

• Diploma, Degree in Engineering (Civil, Mechanical preference) or equivalent.
• At least 10 years of experience in project management, construction, design, testing and commissioning of thermal process plant systems e.g. boiler, furnace, heat-exchangers, flue gas treatment system.
• Familiar with heavy lifting, bulky equipment, items installation and logistic planning. Experience in water and wastewater will be added advantage.
• Well versed in contract management, Quality Assurance and HSE matters. Experience in Process Plant engineering interfacing and coordination will be added advantage.
• Strong leadership and communication skills; meticulous; self-driven, independent.
• Willing to work in Tuas.
• This is a 2 years contract role.

Job Description:

- Perform maintenance, repair, overhaul and servicing (Mechanical)

- Perform lubricant replacement, greasing and flushing for system (Hydraulic)

- Perform wiring replacing, re-routing of harnesses, cabling repair and system testing (Electrical)

- Machinery usage involved overhead crane, buffering machine, hydraulic press, drilling machine & STE etc.

- Working at height (climbing up and down of vehicles)

- Maintain 5S/ housekeeping (Include, sweeping, clearing, and throwing rubbish, washing of parts & vehicles)

Job Requirements:

- NITEC/Higher NITEC in Electrical/ Electronics/ Mechatronics/ Mechanical Engineering preferred

- Competent in use of hand tooling

- Good interpersonal skills, proactive and work well with others

- Preferably with valid Class 3 driving license

Job Description

- Tabulate quantities, estimate cost and request for quotation

- General Contract administration and measurement works

- Liaise with subcontractor and clients

- Ensure timely completion of an assign tender

- Updating contract documents, drawings, and correspondences

- Other quantity surveyor duties as assigned

- Better to have final account experience

Job Requirements

- Minimum Diploma in Quantity Surveying or equivalent

- Minimum 2-year experience in residential housing preferred and final account work

- Proficient in MS Office and other Measurement Software

- Shows independency ability to multi-task, prioritize, and organise tasks

- Ability to liaise with consultants, subcons and client

- Familiar with VOs, Als, EOT and final account work

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

Job Title

Engineer

Occupation

ENGINEER

Job Description & Requirements

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

Job Description:

- Plan, organise and execute the quality assurance activities at in-process and final QA process stages

- Prepare acceptance test plans and work instructions for the inspection and test of the first article and series MRO (Maintenance, Repair and Overhaul) units

- Plan and execute acceptance tests for first article and series production units

- Identify special skills and special test equipment that are to be made available or acquire for acceptance of the products

- Identify and evaluate quality problems, relating to the product, process and quality system, to initiate, recommend or provide solutions

- Initiate actions to prevent the occurrence of any non-conformity relating to the product, process and quality system

- Conduct failure investigation, monitor and ensure closure of corrective/preventive action

- To perform inspection of MRO units

Job Requirements:

- Diploma/ Degree in Mechanical Engineering with basic hydraulic knowledge

- Possess Class 3 driving license

- Knowledge of military vehicles or armament will be added advantage

- Willingness to work in workshop environment

Key Responsibilities:

Statutory Audit, Consolidation & Reporting

· Group: To support Group Financial Controller in preparing monthly and annual consolidation financial statements and related activities including group forecasting and reporting, administration of timeline and compliance, resolution of audit matters and supervision of the Group audit process.

· Company: To manage the audit exercise including preparation of audit schedules and financial statements, resolution of audit matters

Financial Accounting

· To administer the Group Finance policies database (review and update)

· To provide advisory support to member companies on accounting treatments and compliance to accounting standards (IFRS/SFRS)

Treasury

· To assist Group Financial Controller with cash management operations to include daily cash administration, management of current accounts and bank relations

· Assist in monitoring the company’s bank loan obligations, ensuring compliance with debt covenants, and tracking loan maturities and preparing reports required by the bank

Secondary Function:

Group Projects

· To participate and assist in Group’s driven projects

· To assist in information and requirements gathering, financial analysis & simulations, performing UAT and other allocated tasks.

Others

· To execute any other tasks as assigned

Job Specifications:

· Degree in Accounting and a Chartered Accountant/Certified Public Accountant

· Minimum 3 years of working experience in a large reputable accounting firm with experience in statutory group consolidation and knowledge of IFRS/SFRS

· Working experience in a corporate environment with participation in statutory group consolidation would be an added advantage

· Proficiency in ERP systems and Microsoft Office Applications

· Strong analytical ability and takes a proactive approach to issues identification and problem solving

· Independent, committed, meticulous and resourceful

JOB DESCRIPTION

• Plan, organize and manage the Procurement and Supplier Management processes for the assigned Plant under Power & Renewables located in Singapore.
• Liaise with Plant/Project Manager, Section Manager/Head and Engineer to understand their current and anticipated demand for goods, services and works. Integrate the technical requirements into the Procurement Plan and to support in new Tender sourcing.
• Engage in sourcing, evaluating and qualifying of new suppliers. Conduct performance evaluation for existing suppliers on an annual basis.
• Identify and develop alternative suppliers and support cost reduction programmes.
• Handle and manage RFQ/RFP, commercial evaluations, price and T&Cs negotiation, PO/Contract award and PO/Contract administration to final delivery and PO close out - Ensure the Company's best interest is consistently achieved.
• Procure, administer, develop and manage all tenders, contracts in accordance with safety and budgetary requirements, technical specifications, contract and procurement guidelines.
• Ensure that the procurement process is in adherence to Company and Client requirements, Company policies and procedures.
• Work with applicable staff to research and resolve supplier issues which has been escalated and/or advise the assigned Plant as appropriate.
• Build and develop relationships with suppliers and contractors, manage relationships and assist in building effective partnerships.
• Undertake tasks, activities and assignments at the direction of the Procurement Manager.
• Ensure that the monthly procurement reports and cost saving / cost avoidance statistics are reported on-time to the Procurement Manager.
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor from time to time.

JOB REQUIREMENTS

• Diploma / Degree in Engineering or equivalent business studies with more than 3 years of procurement experience, preferably with experience in Plants Operations & Maintenance environment.
• Strong verbal and written communication skills (English).
• High integrity,mature and driver to work independently.
• A good team player who is able to build rapport with a diverse workforce in a multi-cultural setting and work well with other departments and internal stakeholders.
• Strong ability to negotiate, resourceful, resourceful and good analytical skills.
• Able to work under pressure and align priorities for execution.
• Experience with SAP S/4 HANA ERP, SAP Ariba and/or Maximo system is a strong plus.
• Proficiency in Microsoft applications, such as Office, Excel.

Job Responsibilities:

• Carry out land and engineering surveys required for the construction projects, site boundaries or land titles.

• Survey, establish demarcations and guide for construction to proceed.

• Check and compute the pre-computation prior to any setting out for field surveyors.

• Verify accuracy of survey data, measurement, and calculations.

• Ensure correctness of build-up according to construction plans and drawing.

• To coordinate with engineering team to prepare engineering drawings and sketches.

• Design drawings including layouts, elevations and details.

• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.

Job Requirements:

• Diploma in Land Surveying / Geomatics or its equivalent.

• Working knowledge of STAR*NET software.

• Preferably 8 year(s) of post graduate working experience in civil and building projects.

• Good command of English and/or Mandarin.

• Proficient in AutoCAD, Revit & Civil 3D BIM application.

• Able to supervise and lead the survey team for handling all survey related issues.

• Able to provide design and shop drawings under the guidance of Engineers.

• Able to provide advices on altering design changes to suit site condition.

• With LTA Projects experience will be advantage.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 10 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities:

1. Supervise daily operations, ensuring compliance with safety and recycling protocols.

2. Coordinate and assign tasks to staff, including sorting, processing, and handling of recyclable materials.

3. Monitor and maintain equipment and machinery to ensure proper functioning and timely maintenance.

4. Inspect and ensure the quality of recycled materials meets company standards.

5. Manage inventory of recyclable materials and submit daily operational reports to management.

6. Address customer inquiries and complaints professionally to ensure satisfaction.

7. Enforce punctuality, discipline, and adherence to company policies among staff.

8. Ensure cleanliness and organization of the recycling facility.

9. Perform any additional duties assigned by management.

Requirements:

1. At least 2 years of supervisory experience, preferably in the recycling or manufacturing industry.

2. Strong knowledge of recycling processes and safety protocols.

3. Ability to work extended hours, including weekends and public holidays.

4. Must be flexible and willing to report to work at short notice.

5. Able to travel to various locations when required.

6. Strong leadership skills and the ability to manage and motivate a team effectively.

7. Good communication skills with the ability to handle customer interactions professionally.

8. Physically fit to handle tasks involving standing, lifting, and moving heavy materials.

Responsibilities:

• Analyse and diagnose vehicle defect
• Perform mechanical, pneumatic and electrical repair and overhaul maintenance services.
• Attend and provide recovery support to breakdown vehicles.
• Handle facilities and equipment maintenance.
• Any other ad-hoc tasks assigned by superior.
• Experience in EV

Requirements:

• Nitec / Higher Nitec / Diploma in Electrical / Mechanical / Automotive engineering / EV
• Experience in automotive working environment will be added advantage.
• Analytical and fault-finding skills.
• Process a class 3 and 4 driving license.
• Able to communicate and write in English.
• Service-oriented mindset.
• Prepared to be on 24 hours standby for emergency recovery support.

Responsibilities:

• Responsible for pre and post contract QS services;
• Handles interim and final payment claims and feedback comment to payment response to Management
• Job site visiting and monitor site progress
• Responsible for quantities taking-offs, work out variations claim, verify measurements with the client
• Handles contract administration and settlement of final accounts with clients & subcontractors;
• Monitors project phasing & payments;
• Preparation & Revision of Construction Programmes & follow-up delay claims

Requirements:

• Degree in Applied Science in Construction Management or Diploma in Building Services / Mechanical / Electrical engineering
• Able to meet challenging work demands and tight schedules
• Good interpersonal and communication skill
• Good command of spoken and written English
• Independent and resourceful

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.