Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Responsibilities:

• Access Control: Monitor and control the entry and exit of all personnel, vehicles, and deliveries to ensure that only authorized individuals have access to the site.
• Visitor Management: Ensure all visitors to the site are properly registered
• Reporting: Incident reports to the Security Manager or Site Supervisor.\

Requirements

• Security Officer License

• Position: Junior Sales Executive/Engineer (FULL TRAINING PROVIDED/NO EXPERIENCE WELCOME)
• Location: Toh Guan
• Working Hours: Monday to Friday (7am - 4pm), Alternate Saturday (7am - 12.30pm)
• Salary (commensurate with experience): Up to $3,500 + Performance Bonus
• Duration: Permanent
• Industry: Fire protection system supplier

Main Responsibilities:

• Source for new clients
• Promote the company’s products/services addressing
• Following up on leads to make advisor/client appointments
• Build long-term relationships with new and existing customers
• Any other ad-hoc duties assigned

Requirements:

• Minimum 'N' Level
• Full training is provided for inexperienced candidates

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description :

Post Contract Stage

• Understand and reasonably interpret contract document & drawing
• Understand contract provision thoroughly and advise the risk/areas of concern
• To perform measurement and cost breakdown
• To prepare payment certification to sub-contractor/ supplier
• To prepare payment claim to client
• To identify and evaluate variation work

Requirement:

• Diploma / Degree in Quantity Surveying

Job Responsibilities:

• Provide support, troubleshooting and guidance in areas of SAP Fiori, SAP HCM including OM, PA, TM, Payroll modules and the integration with other systems.
• Identify system improvements and enhancements, recommend and implement solution.
• Understand business processes and gather requirements from stakeholders for projects and change requests.
• Liaise between business and vendors to align the understanding to carry out works related to the support and new projects.
• Participate in business transformation journey and improve on business solutions to align with future IT roadmap.
• Maintain and support existing in house applications that are non-SAP.
• Any other ad-hoc tasks or projects as required.

Job Requirements:

• Bachelor’s degree in Information Technology, or related discipline.
• 3-5 years of relevant working experience, especially in areas of SAP HCM.
• Have completed at least 2 SAP HCM implementation.
• Good to have project management skillsets.
• Self-starter and take initiatives to work with minimal direction.
• Good verbal and written communications skills.

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

Manage construction of assigned projects from start of construction to Commercial Operation Date (COD), ensuring compliance with assigned targets in terms of schedule, cost, while making sure all the internal requirements (e.g. HSE) are fulfilled.

Responsibilities

• Track and monitor project schedules and budget, flagging out any potential deviations in terms of timings and costing, using the corporate tools and platforms
• Manage contractors and other third parties in an effective and efficient manner to ensure projects run smoothly
• Identify potential risks in terms of construction and progress, making sure these are flagged to the senior project manager
• Enforce quality checklists for review or inspection of solar projects
• Manage and interact with client throughout construction

Education/Experience

• Diploma or Bachelor’s degree in Engineering
• At least 3 years of working experience in construction / installation projects
• Prior renewable energy or construction industry experience, particularly solar preferred

Core Requirements:

• Proven track record of effective communications with project stakeholders
• Good project management skills with ability to report in a clear and concise manner
• Excellent interpersonal skills with strong verbal and written communication abilities
• Skilled in project management frameworks (eg. Gantt Chart/Scrum/PMP)

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Get to Know the Role

We are seeking a Senior Manager of Application Engineering & QA to lead a team in providing innovative technical solutions while ensuring quality standards. This role involves overseeing continuous improvement projects, mentoring team members, and collaborating with customers on their technical needs. Additionally, the candidate will handle customer inquiries and manage audits. Knowledge of quality assurance practices and strong leadership and communication skills are essential.

Essential Responsibilities

· Lead a team of Application Engineers to meet company objectives and KPIs while planning and managing Continuous Improvement Projects (CIP) focused on quality, safety, and budget adherence.

· Supervise the design and implementation of technical solutions to meet customer needs.

· Coordinate with product development, sales, and support teams for seamless integration.

· Execute and monitor Application Engineering projects to ensure timely and budget-compliant delivery while staying informed on industry trends and technologies to provide innovative solutions.

· Collaborate with different stakeholders and Japanese counterparts to resolve customer feedback.

· Oversee the development of technical documentation and train users on best practices.

· Ensure compliance with quality assurance practices and industry standards.

· Manage customer audits to uphold quality protocols and address any findings.

· Provide coaching and development opportunities to enhance team performance.

Skills and Competencies Profile

· A Master’s or Bachelor’s degree in Engineering.

· 6 to 8 years of relevant experience, including 2 to 4 years in a managerial role.

· In-depth knowledge of thin-film metallurgy, deposition processes, and related equipment (e.g., Ion Beam Deposition, PVD, CVD).

· Proficient in problem-solving, with the ability to address customer issues through critical and logical thinking

· Familiarity with quality assurance practices, including compliance with industry standards and quality management systems.

· Experience in conducting audits and implementing corrective actions to ensure adherence to quality protocols.

· Proficiency in statistical data analysis tools such as JMP, Minitab, Design of Experiments (DOE), and Statistical Process Control (SPC).

· Strong leadership, coaching, and communication skills.

· Ability to thrive in a dynamic, fast-paced environment while managing multiple priorities.

HOYA Electronics Singapore Pte Ltd is an equal opportunity employer. We are committed to building diverse teams and creating a safe and inclusive workplace that enables our people to perform at their best, regardless of nationality, ethnicity, religion, age, gender identity or sexual orientation, and other attributes that make every individual unique.

An offer with HOYA Electronics Singapore is conditioned upon the successful completion of pre-employment conditions, as applicable, and subject to applicable laws and regulations.

HOYA Electronics Singapore does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with HOYA Electronics Singapore.

The Solution Architect shall act as a technical expert for Manufacturing Execution System (MES) and L3/L4 Solutions in the basic design and analysis of systems architecture and enabling readiness towards Systems-of-Systems (SoS) integration. The SA will play a crucial role in the L3 business expansion. They will provide expert advice and guidance to project teams for systems of the most complex nature, evaluation of new technologies and develop departmental practices.

Responsibilities

• Design comprehensive and scalable architectural integrated solutions and the associated validation process to enable the realization of a design brief (e.g., in terms of functionality, aesthetics, and cost) that conforms to organizational specific needs and regulatory standards.
• Work with Subject Matter Experts (SMEs) to maximize usage of Yokogawa industry solutions to enhance Yokogawa L3 business.
• Play an important part in the development of quality procedures and standards by certifying technological processes, qualifying products, and supervising tests.
• Post-deployment of solution, monitor its performance and gather feedback to identify areas for improvement.
• Manage digital product/service portfolio life-cycle management, planning and aligning with relevant cross-functional product teams, procurement, and distribution.
• Evaluate the feasibility/relevance of proposed solutions, working in cross- functional teams with other SMEs to develop and deliver significant aspects of the development program.
• Select appropriate technologies, frameworks, platforms and tools based on customer / SME requirements, considering factors like scalability, performance, security and cost.
• Act as subject matter expert in an area of MES, Data Integration sharing insights, best practices and lessons learnt for entire global network.

Requirements

• Bachelor of Information Technology or equivalent level
• Domain knowledge of either Energy and Sustainability / Material / Life Business
• Experience in SQL, C#, .NET, OPC Classic, OPC UA, Angular, office 365, Edge Technology
• Solution architectural design, requirement specification, testing Specification, software life cycle management, ISA95, ISA 88, Industry 4.0, MES Best practices and Data security, data availability
• Excellent problem-solving and analytical skills
• Strong communication and collaboration skills

Careers at Yokogawa

We regret to inform that only shortlisted candidates will be notified.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

The OT Cybersecurity Consultant will play a key role in developing and implementing robust cybersecurity strategies for industrial control systems (ICS) and operational technology (OT) environments. This role will involve assessing security risks, designing tailored cybersecurity architectures, advising clients on best practices, and ensuring compliance with industry regulations.

Key Responsibilities

- Design and implement cybersecurity architectures tailored to protect OT environments, including ICS, SCADA, PLCs, DCS, and other industrial systems. Ensure that these architectures align with both client-specific needs and industry standards (e.g., NIST, IEC 62443, ISO 27001).

- Conduct cybersecurity risk assessments for OT systems to identify vulnerabilities, threats, and weaknesses. Develop and recommend mitigation strategies to minimize risk exposure and optimize security posture.

- Provide expert consulting services to clients on OT cybersecurity best practices, including network segmentation, asset management, incident response, and compliance. Advise on the adoption of technologies, security frameworks, and policies to enhance OT security.

- Assist clients in meeting relevant cybersecurity compliance requirements, such as NERC CIP, IEC 62443, HIPAA, GDPR, and other regional or industry-specific regulations. Lead efforts in ensuring that OT security controls are compliant with these standards.

- Develop and implement OT incident response plans. Support clients in responding to and recovering from cybersecurity incidents or breaches within their OT environments.

- Develop and deliver training programs for client teams on OT cybersecurity awareness, risk mitigation, and emergency response procedures.

- Work closely with clients to understand their specific OT challenges and requirements, providing tailored cybersecurity solutions. Build and maintain strong client relationships, ensuring customer satisfaction and ongoing security improvements.

- Stay up-to-date on the latest OT cybersecurity trends, threats, and technologies. Provide recommendations for continuous improvement of clients' cybersecurity posture.

Requirements

- Bachelor's degree in Cybersecurity, Computer Science, Engineering, or a related field. Advanced degree (Master’s or PhD) is a plus.

- Minimum of 7 years of experience in cybersecurity, with at least 3 years focused on OT/ICS security.

- Proven experience designing and implementing cybersecurity architectures for industrial control systems (ICS), SCADA systems, PLCs, and other OT technologies.

- Experience with OT cybersecurity frameworks such as NIST SP 800-82, IEC 62443, NERC CIP, and ISA/IEC 62443.

- Certified Information Systems Security Professional (CISSP) or similar general cybersecurity certifications.

OT-specific certifications (e.g., Certified IEC62443, GICSP) are highly desirable.

- Proficiency in OT protocols (Modbus, DNP3, OPC, etc.), ICS/SCADA network architectures, and the integration of IT and OT environments.

- Experienced with firewalls, IDS/IPS, SIEM, and other cybersecurity tools tailored for OT.

- Strong analytical and problem-solving skills, with the ability to assess complex security challenges and propose practical solutions.

- Excellent communication skills, with the ability to translate technical concepts for non-technical stakeholders.

- Strong project management skills, with experience leading cross-functional teams and managing client engagements.

- Ability to work independently and as part of a team in a fast-paced, dynamic environment.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities

• Assist in overtime and payroll calculation
• Answer employee queries regarding leave, salary and overtime
• Update and maintain leave records in Info-Tech system
• Update and maintain employee records in Info-Tech system
• Coordinate document submission with site staff
• Assist in recruitment
• Assist in all foreign worker matters
• Assist in recommending, sourcing and booking of training courses for staff development
• Provide advice to The Management regarding employment legislation and HR practices
• Any other ad-hoc work

Requirements

• Knowledge and understanding of MOM employment law
• Higher Nitec with 2 years work experience, ideally in a construction related field
• Knowledge of Info-Tech software
• Able to communicate effectively with local and foreign employees of all levels
• Willing to learn and grow
• Able to work in a team
• Good work ethics
• Positive character and attitude

Other information

• Working hours: Mon - Fri, 8.30am to 6pm
• Working location: Tampines West

Job Description

• Managing the testing and commissioning of water and wastewater onshore and offshore facilities (FPSO and etc).
• Lead the development and execution of commissioning and startup plans.
• Lead the development of written procedures for testing, cleaning and initial startup of major plant equipment and systems.
• Manage client/vendor/subcontractor coordination for the startup of completed systems. Provide training program and materials for process plant equipment.
• Manage documentation of the commissioning process, including commissioning data and as built documentation, input to O&Ms and feedback to the design disciplines.
• Communicate clearly and concisely, both verbally and in writing.
• Establish and maintain effective working relationships with those contacted in the course of work.
• Recognize the importance of satisfying the customer as the key to achieving other objectives.
• Participate in the acquisition and storing of business and technical knowledge, and the use of those stored intellectual assets.
• Maintain and Recognize that Health and Safety considerations are central to all tasks, and contribute to ensuring safe working environment for all.
• Report safety issues responsibly and participate in improving practice.
• Ensure your own continuous professional development by participating in external networking/conferences/associations/groups, to stay current on industry changes and innovations.
• To continue to develop personally and technically.
• Maintain a positive and solution-oriented approach to work, providing open and honest feedback.
• Attend Progress & Commissioning Meetings.
• Compile commissioning documentation and deliverables.

Requirements

• Degree in Chemical Engineering and/or Degree in Engineering (Mechanical)
• Strong Technical Knowledge
• Minimum 10 years of relevant experience in Water and Waste Treatment and experience in onshore/offshore Oil & Gas area or FPSO line(s)
• Travel to offshore project sites and perform offshore commissioning / assist facility startup
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Proficient in MS Office and Microsoft Project
• A resourceful self-starter who possess excellent problem-solving skills
• Systematic and able to work under pressure
• Mature, proactive, take initiative and well organized
• Meticulous and able to follow through with tasks promptly
• Proficiency using Microsoft Office and Microsoft Project, good report writing skills

Mission

• Plan and implement the Project Quality Management System (PQMS) activities within the project and organization.
• Plan and ensure the project Quality Control (QC) activities implementation
• Report Quality information and data about Project in line with Corporate Guidelines
• Act as focal point for quality related matters within the project and in liaison with external entities.
• Act as Auditor Lead for ISO matters.

Major Duty and Tasks

• Ensure the definition and implementation of the PQMS and the identification, preparation and distribution of needed Project Quality Plans and procedures in accordance with the Company and External Parties Quality Management System (QMS)
• Ensure that the integrity of the Company QMS is maintained when changes are made to the system for the project
• Ensure that the correct implementation of the Project QMS is checked and monitored through the planning of quality audits
• Ensure that the correct implementation of planned quality audits, taking in account all project processes, including the issue of relevant audit reports
• Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality Requirements
• Conduct external audit to Vendors and Subcontractors QMS and ISO requirements
• Ensure, within the project organization, the planning of activities aimed at promoting the applicable Contractual Quality Requirements
• Plan and allocate Quality resources to the various area of the project, managing them in liaison with involved Quality functions
• Support the Project Manager in relations with the Client and with the Authorities responsible for quality matters
• Participates to Project Management meetings, to ensure coordination between Quality activities and Project Management activities
• Ensure the preparation and issue of QC specifications for the works, coordinating and agreeing the checks by the Technical Departments and Client
• Ensure the issue of quality requirements to be incorporated, in the contractual documents, with Vendors and Subcontractors and organizations in charge of works
• Ensure the Site QC activities implementation, including the monitoring of QC management tool updating
• Ensure management of nonconformities
• Promote appropriate actions in order to prevent or eliminate potential non-conformities and their causes
• Ensure the management of Cost of Non Quality process
• Ensure knowledge and awareness of Quality requirements within the Project Team, also performing Quality Training activities
• Collect and analyse project quality data also to organize and lead the Project Quality Management Review
• Ensure the management of lessons learned process
• Ensure Customer satisfaction process implementation
• Report Project information and data to Company's Quality Manager by means of Corporate methodologies and tools and keep the Project Quality Reporting tools updated.
• Providing leadership, mentorship, and direction of all QA/QC personal.

Additional Requirements

• Ability to read PID’s and Isometric drawings.
• Understand NDT techniques.
• Experience with Ferrite and PMI techniques
• Knowledge of WPS/PQR activities
• Knowledge of Painting
• Familiar with AWS/ASME/ANSI codes and standards
• Experience with general Oilfield fabrication products
• Maintain the required test records and update accordingly.
• Conduct incoming and outgoing inspection activities such as inspecting the final output, comparing it to the requirements, and approving or rejecting the final products.
• Monitor the welding, NDT and etc activities.

Requirements:

• Diploma/Degree in relevant/related fields
• Min 10 years of QC inspection experience for Water, Oil and Gas fabrication
• Inspection Qualifications eg: CSWIP or equivalent
• Able to communicate with various level of people
• Good in verbal and written English
• General computer knowledge is essential (MS word, excel, powerpoint, MS outlook)
• Willing and able to travel overseas

Job Description:

• Review the basic process design from the proposal/sales team;
• Develop detailed design and P&IDs based on project specification;
• Prepare engineering calculations and equipment sizing;
• Review and understand project specifications to ensure company design complies with customer specifications;
• Prepare equipment datasheets (valve list, equipment list, piping schedule, instrument list, etc);
• Supervise and review complex equipment skid 3D model to ensure compliance with project specification;
• Supervise the preparation of general arrangement drawings, piping detail drawings; skid structure arrangement drawings;
• Interface with EIA (Electrical, Instrumentation & Automation) engineer in preparation of project documents;
• Send inquiries to vendors to obtain price quotations;
• Review of vendors, fabricators and sub-contractors quotations to ensure compliance with project specifications;
• Review of vendors, fabricators and sub-contractors engineering deliverables to ensure compliance with project specifications
• Participate in internal and external design reviews;
• Prepare O&M manuals;
• Support testing and commissioning

Requirements:

• Candidate must possess at least a degree in Environmental/Mechanical/Chemical Engineering;
• At least 5 to 8 years of relevant experience in industrial water/wastewater treatment;
• Experience in the O&G industry is a plus;
• Experience in the design of complex skid-based industrial water treatment systems;
• Experience working on multiple projects simultaneously;
• Knowledge of industry standards and specifications;
• Able to work in multi-cultural teams;
• Proficient in MS Office applications;
• Willing to travel

Responsiblities:

• Responsible for ferrying of staff and dispatch works as assigned
• Ensure timely collections and deliveries of goods / items
• Ensure cleanliness and general upkeep of vehicles at all times
• Perform routine inspection of vehicle and notify of occurring deficiencies or needs for repairs
• To perform work according to health and safety regulations
• Ensure safety practices and housekeeping is to maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Requirements:

• Class 3 / 4 Driving License
• Familiar with Singapore route
• Min 2years of relevant experience

Job Description:

• Project execution for water and wastewater treatment system projects: desalination plants, sewage treatment plant, industrial water and wastewater treatment plant.
• Develop detailed design and P&IDs based on customer requirements and basic design.
• Review project specification to ensure company design complies with customer specifications.
• Prepare equipment datasheets (equipment data sheets, valve lists, equipment list, piping schedule, etc).
• Review and collaborate with designer/drafter to develop complex equipment skid 3D model.
• Review of supplier, fabricator and sub-contractor quotation and deliverable to ensure compliance with project specification.
• Coordination of all technical activities on assigned projects.
• Project engineering schedules and forecasts.
• Plans, schedules, conducts, and coordinates assigned project engineering work; Coordination and checking of engineering deliverables.
• Monthly project status reports and change orders.
• Monitors work for compliance to applicable codes, accepted engineering practices.
• Accountable for the successful completion of engineering projects.
• Ensures effective communication and coordination on assigned projects between all disciplines and all other project participants.
• Responsible and accountable to ensure that all assigned personnel are coordinating their activities with other project participants, and that the requirements of the Contract are being satisfied.
• Ensure that project charges are correctly represented for accounting’s closing process.

Requirements:

• Degree in Environmental, Chemical, Mechanical, Electrical Engineering.
• Candidates with knowledge of water treatment, wastewater, environmental engineering is preferred.
• At least 3-5 years of relevant experience.
• Good in verbal and written communication skills in English.
• General computer knowledge is essential (MS Word, Excel, Powerpoint, MS outlook).
• Willing and able to travel overseas frequently.

Introduction:

Hostmost Group of Companies is a leading Marine Radio Communications and Navigation system service provider. Established in 1989, we have expanded our operations globally, providing reliable services to clients across different regions. With 14 wholly owned offices and depots spanning Asia to North America, we pride ourselves on maintaining a strong global service network. At Hostmost Group, we believe in continuous improvement and invest in staff training to stay ahead of industry trends and requirements. Our group is currently expanding and there will be several vacancies available.

Job Descriptions:

· Manage sales enquires and process quotations.

· Process sales or service orders.

· Process draft billings.

· Meet up with customers.

· Any ad hoc duties as assigned

Requirement:

· Diploma & above.

· Minimum 2 years of sales or admin experience. Commensurate with experience.

· Knowledge of SAP will be an advantage.

· We are currently prioritising candidates able to work in Singapore without the need for sponsorship of an employment visa.

Location:

· Near Pasir Panjang MRT station (SINGAPORE)

Interested candidates who wish to apply for the advertised position, please send full resume with the following details:

1. Reasons for leaving ALL your employment

2. Current & expected salary

We regret that only shortlisted candidates will be notified.

Job Types: Full-time, Permanent

Benefits:

· Dental insurance

· Health insurance

Schedule:

· Monday to Friday

· Weekend availability

Education:

· Local Polytechnic Diploma (Preferred)

Experience:

· Sales: 2 years (Preferred)

Job Types: Full-time, Permanent

Pay: $3,000.00 - $5,500.00 per month

Benefits:

• Dental insurance
• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary
• Performance bonus

Work Location: In person

Introduction:

Hostmost Group of Companies is a leading Marine Radio Communications and Navigation system service provider. Established in 1989, we have expanded our operations globally, providing reliable services to clients across different regions. With 14 wholly owned offices and depots spanning Asia to North America, we pride ourselves on maintaining a strong global service network. At Hostmost Group, we believe in continuous improvement and invest in staff training to stay ahead of industry trends and requirements. Our group is currently expanding and there will be several vacancies available.

Job Descriptions:

·Assisting the sales team.

·Manage sales enquiries and create quotations.

·Process sales or service orders.

·Process draft billings.

·Any ad hoc duties as assigned

Requirement:

·Diploma & above.

·Knowledge of ERP, SAP, and MICROSOFT BUSINESS CENTRAL will be an advantage.

. 1 year experience

Location:

·Near Pasir Panjang MRT station (SINGAPORE)

Interested candidates who wish to apply for the advertised position, please send full resume with the following details:

1. Reasons for leaving ALL your employment

2. Current & expected salary

We regret that only shortlisted candidates will be notified.

Career Path:

The Sales Assistant, who can prove to learn and progress well can promote to next advanced roles as Sales & Service Coordinator within the 1st year.

Job Types: Full-time, Permanent

Pay: $2,500.00 - $3,000.00 per month

Benefits:

• Dental insurance
• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary
• Performance bonus

Work Location: In person

For Sewage and Drainage Pipe Jacking Project：

1. work in SG, Indonesia, HK;

2. 5years above site supervision and overall management experiences ;

3. Able to plan, design concept, organize resources for these projects.

4. Able to add value for the projects through design concept, machine selection, manpower allocation, good schedule and planning.

Roles & Responsibilities

• Responsible Operate Conventional Machine / Milling / Grinding Machine.
• Perform minor troubleshooting, repairs and replace on equipment spare part.
• Perform housekeeping and cleaning of machine and work area to ensure neat and tidy working environment.
• Perform On-site service.
• Perform other ad hoc duties assigned based on business needs.

Job Requirements

• Driving License.
• Responsible, self-motivated and good interpersonal skill.
• Ability to work independently as well as in a team.
• Positive attitude towards learning.
• Basic knowledge of hardware analog and digital circuit.
• Strong technical skills with the ability to diagnose and fix hardware issues.
• Able to work on weekend and overtime if needed.
• At least 2 years of working experience.
• Candidates without experience are welcome to apply as training will be provided.
• Preferably able to start immediately within short notice.

Minimum Qualification Level: GCE O-Level, Nitec, NTC Grade 2 or equivalent

Field of Study: Engineering Trades n.e.c. (eg pipe & steel fabrication, welding, diesel engine mechanics)

1. Can bear hardships and stand hard work, follow the work.

2. Can find and solve the safety and quality problems in construction, timely find and deal with them.

3. Coordinate and educate good workers on safety and quality awareness.

4. Cooperate with the Main Contractor to meet the requirements of the construction schedule, etc.

5. Coordinated the cooperation of all employees and completed the production tasks assigned by the company.

6. Complete the progress requirements of the Main Contractor on time, and all the work should meet the satisfaction of the Main Contractor engineer.

Summary

The objective of the role is to lead, architect and manage the technology eco-system of LK Asia Data Platform and integrate with IT Enterprise Architecture along side business controlling that supports the organization’s vision, mission, and strategy.

What you'll do

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Lead and manage staff of data engineers to build, maintain and support the data architecture.

Design and build the DWH database models (star schema).

Design and build efficient data pipelines (ETL) that ensure data quality and integrity.

Manage the BI semantic model, security roles, access rights and row level security filters.

Work with business counterparts as well as IT Business Consulting, Infrastructure teams and external vendors on new data requirements.

Ensure proper maintenance and support of the BI architecture including security roles, deployments, security patching and monitoring to ensure performance and compliance with internal technical and security guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Assist IT management with ad hoc tasks related to BI, reporting and audit as well as other tasks when required.

What you'll need

• 8+ years of experience in IT, preferably with BI Development background and exposure to different BI domains, platforms, and technologies.At least 2 years in staff managing position.Strong knowledge and proven hands-on experience in data warehousing (e.g. ETL design/development, data modelling)Proficiency in Oracle and PostgreSql.Strong analytical thinking, problem-solving capability and business process understanding.Customer-oriented with good communication and interpersonal skills.Good leadership and people management skills.Proactive, self-motivated, hard-working and able to work in a dynamic environment.Good spoken and written communication skills in English

What you'll receive

By designing and implementing scalable, secure, and efficient data solutions that meet the needs of the organization and its users, a holder of the position will gain a deep understanding of the business needs, processes and business applications used as well as have the opportunity to keep up with the changing technologies and trends in the BI & data field through working on various IT projects.

We are dedicated to fostering a family-friendly culture and work environment. We are an equal opportunities employer and welcome applications from all candidates with the required skills and experience. We enable fair pay within the company by creating non-discriminatory salary systems. Working at Lidl & Kaufland Asia is rewarding, in every sense, because we give you the training to succeed in your role and plenty of opportunities to progress your career here. We are accredited as a Fair and Progressive employer by the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP).

Market Leading Remuneration Package:

• Annual wage supplement and discretionary bonus
• Life Insurance
• Medical Insurance

Supportive Environment:

• Out of Office leave for important appointments
• In-house training courses
• Training sponsorship scheme

Work-life Balance:

• 5-day week
• Competitive Annual Leave
• Charity, Community and Sporting Events

If you are not invited for an interview within 4 weeks, we regret that your application was not suited to this vacancy.

For more company information, please feel free to visit: http://www.lidl.asia

Personal data collected will be used for recruitment related purposes only and will be destroyed after 12 months

• Cloud related Field Data Center Operations.
• Responsible for Capacity planning of Data Center resources and Data Center designing.
• This position requires hands-on technical skills to install compute rack, network and cables.
• Maintain and troubleshoot various hardware and physical network components.
• Perform and/or manage 3rd party vendors for installation of Data Center infrastructure such as rack, power, server, network equipment, cabling and cross-connects.
• Manage inventory and coordinate with suppliers and shipping companies for domestic and international shipments.
• Document, improve and maintain standard operating procedures
• Participate in the change management process
• Initiate and manage RMA processes with equipment vendors.
• Must be able to provide 24/7 on call support for emergency and outages.

Requirements:

• Minimum 8 years of experience in working with Data Center and ISP vendors for coordinating resource provisioning and device installation
• Experience in strong hands-on installation and troubleshooting server and network equipment
• Experience in DC project management
• Experience in asset management, and inventory control
• Experience in dealing with Data Center remote hands and their ticketing system.
• Must have working knowledge of Excel and shared docs and should be able to work with complex spreadsheets
• Experience dealing with customer support and SLAs
• Technical certification involving an IT discipline
• Hard working self-starter who can work with very minimal supervision
• Ability to troubleshoot enterprise level technical problems
• English proficiency , spoken and written
• Broad exposure to technical environments with understanding of hardware, networks, and the cloud infrastructure
• International shipping experience a plus (Up to 20% travel)

DUTIES & RESPONSIBILITIES

• Repair and maintain, equipment and machines of cold room and ice maker
• Installation of chiller room,freezer room and troubleshooting chiller unit,freezer unit and ice maker
• Troubleshoot systems to determine causes and rectify.
• Service and repair kitchen equipment at work shop such as chiller, freezer ,ice maker ,bracing pan, water boiler, combi oven, dough mixer, spiral mixer and etc
• Prepare quotation and evaluate costing and propose to client.
• Ability to run a team and be responsible for installing and maintaining Cold-room projects.
• Dismantle and replace worn or defective equipment.
• Perform mechanical overhauls and refrigerant reclaiming.
• Install expansion and control valves, compressor, condenser and other components
• Top up gas to the systems
• Keep record of repairs and job schedules.
• Maintain tools and spare parts in good order.
• Practise safe and healthy working behaviour and report hazards and unsafe act.

Candidate Requirements

• Bachelor’s degree in Mechanical Engineering, HVAC Engineering, or a related field.
• Proficiency in CAD and AUTOCAD software.
• Strong knowledge of refrigeration, insulation, and energy-efficient design principles.
• Class 3 driving license is an advantage, but not necessary.
• Able to speak and write English.
• Knowledge of electrical wiring and mechanical works.
• Job requires heavy lifting, climbing and handling of materials
• Able to perform overtime and stand by for emergency
• Manage a team with proper guidance and team framework

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability to [email protected]

Responsibility & Scope of works:

• Manage, supervise and co-ordinate small projects, electrical installation turn-on inspection & licensing inspection undertaken by the Company and works assigned to you by the Project Manager.
• Participate in company tender exercise and quotation.
• Assist in price negotiation, drawings preparation and related activities.
• Ensure timely requisition of resources such as labour, materials, equipment for the small project works - power upgrading, tenancy renovation works, A&A works, etc.
• To issue site purchase order - purchasing material for electrical installation works.
• Inspection & Testing of the electrical safety of electrical installation in commercial and retail, healthcare, industrial building in compliance with Code of Practices.

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree in Electrical/Power/Electronics Engineering
• Good communication skills, team player, independent, strong leadership and self-motivated
• Knowledge in Electrical Installation (EI)
• At least 2-3 years working experience in the related field.
• Full-time position

Responsibilities:

• Oversee organization’s office services, facility services & facility improvement initiatives
• Supervise & motivate office, facility and outsource in-house facility service teams to ensure daily office, facility and building operations are carried out seamlessly
• Formulate substantiable administrative and facility management strategies, policies and procedures to devise ways in streamlining work processes and reduce cost
• Manage change management and rollout facility optimization initiatives in the office layout and building facility
• Manage premises-based property protection insurance programmes and project bidding insurance programmes
• Manage admin and facilitybudgets and monitor relevant common and dept expensesto meet Company’s budget policy and guidelines
• Ensure strictly compliance on EHS and other stipulated statutory regulations for the running of building services and facility operations
• Manage tenant services related to office services, building services and facility maintenance
• Keep abreast on the latest cost-effective solutions and implement best practices on office, building maintenance and facility improvement projects
• Source and oversee office/facility contracts and supervise service providers for building services such as catering, cleaning & security services
• Plan and implement premises-wide facility maintenance programmes and improvement projects
• Implement corporate facility management improvement programmes in all country offices

Requirements:

• Degree in Facilities Management/Business Administration
• Minimum 8 years of relevant experience in facility management, office administration, or a related field
• Experience in a supervisory or managerial role is preferred, demonstrating leadership and team management capabilities
• Strong leadership and team management abilities
• Knowledge of facility management best practices and regulations
• Experience in budget management and cost control
• Ability to implement change and manage projects effectively
• Strong communication and interpersonal skills
• Preferably someone with some of these certifications - Certified Facility Manager (CFM), Facility Management Professional (FMP), Project Management Professional (PMP), Occupational Health and Safety certification