Chemical Process Engineer (Chemical Engineering / Operations)

• Tuas (Company Transport / Transport Allowance if candidate travel to work by themselves (S$120)
• 5 Days work per week (Mon to Fri 8am to 5pm)
• Basic: $3800 to $4300 + site allowances
• At least a Bachelor in Chemical Engineering + Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Career Progression Opportunities

Job scope

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turnkey manager to plan and execute plant shutdown

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment.

In 2021, Enterprise Singapore, the national standards body for Singapore, had appointed ERI@N as a Standards Development Organisation (SDO) to develop and promote standards under the Electrical and Electronic Standards Committee. This includes standards supporting emerging areas such as renewables -offshore wind/marine & solar energy, secondary batteries and cells, solid state transformers, electrical energy storage systems, and smart grids. We also work with regulators and the industry on standards for electrical installations, building & services and safety and effectiveness of electrical products and services.

We are looking for a passionate Project Manager to support the work of the SDO.

Core expertise:

Project management responsibilities include managing the identification, development and promotion of standards meeting key requirements set by Enterprise Singapore (EnterpriseSG). These include supporting standards committees under the management of ERI@N in their standard development and promotion work to ensure timely and successful delivery of new and reviewed standards. The PM should have a background in business skills, project management, budgeting, analysis and stakeholder management. Familiarity with key technologies such as power systems, electronics, solar PV, battery systems and electrification as well as understanding of commercialization is an advantage.The PM must be detail oriented, able to multitask and demonstrate the ability to be intervene decisively and proactively.

Key Responsibilities:

Standards development

• Support standards committees to identify key areas for standards development from FY 2024 to FY 2026 which includes meetings with key stakeholders and preparing new work proposals.
• Support standards committees to develop standards within the timelines and quality requirements set by EnterpriseSG and the industry. These will include managing the preparations for meetings, capturing key comments, discussions and edits, conducting public consultations, addressing public comments, preparing draft standards for publications.
• Support the standards committee leaders in managing key stakeholders within the committee and industry with aim to build consensus and address standards implementation issues.
• Support participation of standards partners in international standardization including balloting, international meetings and hosting ISO/IEC TC meetings in Singapore.

Standards promotion

• Work with standards committees and EnterpriseSG to plan and execute standards promotions events targeting key stakeholders such as industry, government agencies and regulators, research bodies and the public. This could include standards launches, case studies, seminars and workshops. The PM is also expected to develop suitable presentation materials for these events.
• Work with standards committees and EnterpriseSG on verification studies to quantitatively evaluate the adoption of standards by key stakeholders.

SDO administration

• Assist Head, SDO and colleagues to manage the SDO budget to ensure budget marksmanship are met.
• Ensure procurement guidelines for EnterpriseSG and NTU are complied with.
• Assist Head, SDO in preparation of SDO progress reports to EnterpriseSG, the Singapore Standards Council and ERI@N management.
• Assist Head, SDO in audits concerning the operations and financial issues of the SDO.

Job Requirements:

Competencies and Qualifications

• Bachelor’s Degree in Electrical Engineering/ Computer Science / Mathematics/ Physics
• Min. Years of Experience: 3 years for project manager.
• Entry level candidates are welcomed to apply but will receive title of Project Officer.
• Certified Project Management Professional (PMP) will be an advantage
• Working Knowledge in Agile Project Delivery
• Working Knowledge in Microsoft Project, Excel, Word, Power point, SharePoint
• Experience within the utility or energy and power system industry is a strong advantage
• Excellent Stakeholder management

Added advantage:

• Experience in adopting or implementing standards
• Experience in Interactive Project Management tools like Click up, JIRA.
• Experience in document management tools like SharePoint
• Experience in R&D cross-functional New Product/Technology Introduction (NPI/NTI) programs & commercialization

Other Requirements:

• Excellent written and verbal communication skills
• An effective and efficient team player with good attitude and interpersonal skills
• Self-motivated for documentation maintenance and management

We regret that only shortlisted candidates will be notified.

Benefits:

• Basic up $2400
• 5day, Monday - Friday, Office Hour
• North

Job Scope:

• Handle on Autocad review and editing
• Provide support to engineering team for autocad drawing
• Administrative work
• Work with different department to complete project/task

Job Requirement:

• Autocad relevant experience is advantage
• Min Nitec in Engineering

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Lee Cheng Yin (Gina) (R22104523)

EA License No: 20C0358

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for highly talented and motivated candidates to work on developing new functional materials. Candidate must be able to work in a fast-paced and dynamic environment with researchers across different disciplines. Candidate should have experience in sensing materials or self-healing materials.

Qualifications

PhD degree in Material Sciences, Electrical/Electronics, Applied sciences, basic sciences, technology, mechanical engineering or other relevant fields. Experience with data analytics/AI models a plus.

Electrical Project Engineer

[Industrial | Commercial | Data Centre Industry]

• Basic: $3,000 - $4,500 (Depends on EXP)
• Working Hours: 5 Days
• Location: Woodlands

Interested applicants can sent your CV to email [email protected]

About our Client:
Our client is a leading organization specializing in engineering and technology solutions across diverse industries. They are committed to delivering innovative and efficient solutions for industrial, commercial, and data centre projects

Job Scope:

• Lead and manage multiple electrical engineering projects, ensuring completion on time, within budget, and in compliance with safety and quality standards.
• Prioritize tasks and allocate resources effectively to meet deadlines and project requirements.
• Assist in the preparation of bid tenders for new projects, ensuring adherence to company policies and guidelines.
• Evaluate and approve changes that impact project scope, budget, or timeline, ensuring effective decision-making.
• Oversee and monitor project performance, identifying and resolving operational issues promptly to prevent delays.
• Manage and mentor project teams, fostering collaboration and operational excellence to achieve organizational objectives.
• Ensure compliance with safety regulations and maintain a high level of quality in project execution.
• Allocate and manage resources, ensuring optimal productivity and project success.
• Analyse and approve project investments to best meet the company's strategic goals

Requirement:

• Professional qualifications in Electrical Engineering or related fields.
• 2- 5 years of relevant experience in the construction engineering industry.
• Strong interpersonal and communication skills, with the ability to work independently and in a fast-paced environment.
• Demonstrated ability to work effectively with project teams and managers at all levels.
• Candidates with extensive experience may be considered for the Senior Project Engineer role.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kho Tong Hai | EA Reg No: R24122411

The Offensive Engineering Analyst will be responsible to conduct vulnerability assessment/penetration tests of Income internal/external web, mobile and web service applications and execute simulated security testing against corporate web applications, networks, and infrastructure. This role will come under the IT Risk and Security department, reporting to the Senior Manager of Cyber Assurance.

Key Responsibilities

• Coordinate with external vendors to conduct application security/penetration tests of Income internal/external web, mobile and web service applications, leveraging both manual techniques as well as automated tools in order to uncover and report security vulnerabilities that exist and liaising with systems & applications owners on follow up actions.
• Perform vulnerability scanning/discovery, tracking of remediation SLA and vulnerability fix verification in support of the remediation
• Plan and scope the internal Red Teaming program to conduct red teaming exercises and execute adversarial simulations mimicking real-world threat actors (APTs, insider threats, etc.) against Income environment using tools and manual techniques.
• Conduct compliance audit on Income Systems and Devices hardening standards.
• Perform risk assessment and recommend mitigations on vulnerability findings when remediation is not possible.
• Administer security tools and service providers.
• Support the running of bug bounty and vulnerability disclosure programs.
• Conduct meetings to communicate the findings and implications to stakeholders and track remediation status and outcomes.
• Undertake other projects and tasks that may be assigned by management.

Qualifications

• Bachelor's Degree with more than 5 years of experience in technology, information or cyber risk management, information security or enterprise architecture.
• Minimum of three years years of experience in offensive security (Red Teaming, Penetration Testing, or related fields).
• Minimum of two years direct information security experience in penetration testing, vulnerability assessment, threat hunting, red teaming or similar roles.
• Strong background in application development, web application technologies and architectures, application security testing or vulnerability assessment.
• Familiar with penetration testing steps, methods, procedures, and excellent in using penetration testing tools.
• Familiar with attack techniques and methods, common security vulnerabilities and threats of network and application systems, and competent in identifying and evaluating these vulnerabilities and threats with existing tools.
• Equipped with programming skills in Java, .NET or Python.
• Relevant industry certifications such as CEH, OSCP, OSCE, GPEN, GWAPT, CREST CRT certifications is preferred.

Competencies

• Hands-on experience on vulnerability assessment tools (Preferably Tenable and others such as Qualys, Rapid7).
• Working knowledge on industry standard scoring models such as CVSS.
• Working knowledge on SAST, DAST, IAST, SCA and DevSecOps.
• Familiarity with penetration testing techniques (eg web application proxies, packet capture analysis software, browser extensions, penetration testing Linux distributions, static source code analyzers, SoapUI, etc).
• Good understanding of adversary tactics, techniques, and procedures (TTPs), such as those outlined by MITRE ATT&CK.
• Good understanding of offensive security tools (e.g., Cobalt Strike, Metasploit, Burp Suite, BloodHound, Mimikatz).
• Good written skills and able to effectively communicate security and risk-related concepts to technical and non-technical audiences.
• Work well under pressure and demonstrate the ability to meet tight deadlines.
• Able to work independently and in a team-oriented, collaborative environment.

We are seeking a dynamic and experienced professional to join Couchbase as the Director of Solution Engineering. In this role, you will play a pivotal part in supporting our Account Teams and engaging with accounts across your allocated region/geography.. As the Director of Strategic Solution Engineering, you will bring your expertise in Solution Engineering and Presales Leadership to drive success in collaboration with our key customers.

Responsibilities:

● Collaborate closely with Account Teams and our Customers to understand customer requirements and design tailored solutions.

● Serve as a key technical advisor and liaison between customers and internal teams, ensuring effective communication and alignment of goals.

● Lead a team of Solution Engineers, providing mentorship, guidance, and strategic direction to drive excellence in customer engagement.

● Utilize your extensive Solution Engineering background to articulate complex technical concepts and capabilities to both technical and non-technical stakeholders.

● Leverage your 4+ years of presales leadership experience to drive strategic initiatives and contribute to the overall success of the organization.

● Fluently apply the MEDDIC framework in customer interactions to uncover and address key customer needs and challenges.

● Demonstrate a deep understanding of database technology, particularly in the NoSQL space, to effectively position Couchbase solutions.

Qualifications:

● 7+ years of experience as a Solution Engineer, with a strong technical background in database technology.

● 4+ years of experience in presales leadership, showcasing a track record of success in building and leading high-performing teams.

● Proven track record in data centric presales efforts and specifically, database technologies.

● Fluent in MEDDIC methodology, with a proven ability to apply it to complex sales engagements.

● Highly collaborative mindset with the ability to build strong relationships with internal and external partners.

● Self-motivated and able to thrive in a high-accountability environment.

● Comfortable working with cutting-edge database technology and staying abreast of industry trends.

Responsibilities

• Editorial support (admin & editorial work)
• Topic/trend spotting & research in Engineering/Computer Science/Environmental Science
• Database management and building
• Minimum period of employment: 8 weeks
• Minimum education level: polytechnic student / undergraduate
• Specialisation in Engineering/Computer Science/Environmental Science-related fields preferred but not necessary

• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Willingness to meet clients on-site to understand their needs, provide hands-on demonstrations, and establish a personal connection to build trust.
• Preparation of quotations
• Assiat in stock take and stand by delivery.
• Assist site project and oversea on site if needed.
• To develop strategy in order to meet sales target
• Required valves assemble if needed.

Requirements:

• Diploma/Degree in Electrical / Electronic / Mechanical Engineering, or relevant education.
• Prefer 2 years experience in related industry.
• Possess Class 3 license with own vehicle

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

Mon to Fri: 8:15am to 5:30pm

Responsibilities:

- Leads new product design, development activities of connectors, wire harness and electronic packages.

- Responsible for managing pre-engineering, product design development of new products.

- Performs value analysis, value engineering and troubleshooting.

- Manage a team of Product Design engineers and responsible for products’ lifecycle.

- Guide team in performing data analysis, yield enhancement, product cost reduction and device reliability improvement.

- Develop market-specific connector products and optimizing product designs and yields.

- Initiate and implement improvement processes to improve efficiency and sustainability in productions.

- Communicate technical information to non-technical stakeholders, and building relationships with suppliers and customers.

- Ensure processes meet quality standards and safety compliance requirements.

Requirements:

- Degree / Diploma in Mechanical Engineering/ Electrical Engineering and or other related certifications.

- Possess relevant connectors industry knowledge and expertise

- At least 8 years of experience involved with product engineering (design and development)

- Experienced in leading a team

You'll be at the heart of shaping the company success by optimizing operations, and guiding teams toward peak performance. Apply Now!!

• Permanent Position / MNC/ Manufacturing/ Near Woodlands MRT/ Urgent Hiring!!
• AWS/ Annual Leave/ Medical Benefit/ Dental Benefit/ 5 days’ work week
• Possess Master Molder Certificate 1 or 2

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities

• Heading entire process engineering team in production, tooling, NPI and validation.
• Responsible for injection molding and its associated processes for the medical, automotive and technology sectors.
• Lead the activities of process engineering, production/process improvement pertaining to molding process development, mold buyoff, new mold transfer, quality issues.
• Provide documented procedures on buyoff on new / transfer molds prior to mass production release keeping process development as the core activity.
• Lead process validation activities including generation of validation protocols and reports such as IQ, OQ and PQ.
• Ensure that yields and cycle time are in accordance with BOM standard.
• Work in cross-functional group to coordinate with all process-related issues.
• Investigate and implement solutions on process or material related problems.
• Extend support to productivity program such as process automation, tool fabrication and improvement activities.
• Provide adequate support for the cross functional activities such as handling non-conformance product; Initiate actions to prevent recurrence through proper documentation of process instructions, root cause analysis, process flow chart, FMEA, Control Plan.
• Conduct periodical review of process-oriented SOPs & other documentations & keep them up to date a timely basis.
• Drive for continuous improvement projects. Maintain the effectiveness of the validated processes through the understanding of cGMP (current Good Manufacturing practice.

Requirements

• Bachelor’s degree / Diploma qualification in plastic processing / chemical / mechanical engineering.
• Possess Master Molder Certificate 1 or 2.
• Min 10 years industrial experience in plastic engineering and its processing technique.
• Possess through knowledge and practice on scientific molding techniques.
• Knowledge of handling all sort of plastic polymers and molds.
• Familiar and hands on with medical device validations.
• Expert in analysing cycle time and provide support to RFQs.
• Knowledgeable in Risk Assessment, Failure mode analysis, Process Validation, Continuous Improvement and Design of Experiments (DOE).

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Job Scope:

• Collaborate with architects, project managers, and other stakeholders to ensure integration of M&E systems
• Ensure compliance with relevant regulations, codes, and safety standards
• Conduct site inspections to monitor installation progress and quality
• Troubleshoot and resolve technical issues related to M&E systems
• Prepare technical documentation, including specifications and reports
• Manage procurement of M&E materials and equipment
• Provide leadership and mentorship to engineering teams
• Monitor project performance and implement improvements as needed

Requirements:

• Degree in Mechanical or Electrical Engineering or equivalent
• Minimum 10 years of experience with at least 2 LTA MRT underground projects
• Proficient in BIM software and AutoCAD (preferred)
• Experience in writing tender specifications (preferred)
• Strong communication, writing, and analytical skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Manage and grow existing accounts to ensure continuous growth
• Expand market share with existing and new customers
• Willingness to meet clients on-site to understand their needs, provide hands-on demonstrations, and establish a personal connection to build trust.
• Preparation of quotations
• Assiat in stock take and stand by delivery.
• Assist site project and oversea on site if needed.
• To develop strategy in order to meet sales target
• Required valves assemble if needed.

Requirements:

• Diploma/Degree in Electrical / Electronic / Mechanical Engineering, or relevant education.
• Prefer 2 years experience in related industry.
• Possess Class 3 license with own vehicle

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

Technician Duties

• Inspect, maintain and repair
• Diagnose faults and carry out repairs
• Install new systems and components
• Perform tests on components and systems
• Conduct routine maintenance and servicing
• Troubleshoot and diagnose faults
• Comply with health and safety regulations

Requirements

• Able to carry out maintenance and repair on hydraulic systems
• Experience in using hand and power tools
• Experience in diagnosing faults and repairing hydraulic systems
• Ability to read and interpret hydraulic diagrams
• Ability to work as part of a team

• Permanent position/ MNC/ Manufacturing
• AWS bonus/ Annual Leave/ Medical Benefit/ Dental Benefit
• Near Woodlands MRT/ Urgent Hiring!!
• 5 days’ work week

Our client is a global advanced precision engineering & manufacturing solutions provider.

Summary

• Responsible for overseeing the design, development, and implementation of automated systems and processes to drive efficiency and productivity within the company’s manufacturing operations

Responsibilities

• Develop and implement strategies to automate various manufacturing processes and operations
• Lead a team of automation engineers and technicians to design, configure, and maintain automated systems
• Collaborate with cross-functional teams to identify opportunities for automation and process improvements
• Oversee the testing, commissioning, and ongoing maintenance of automated equipment and systems
• Analyse data and metrics to continually optimize the performance of automated processes
• Ensure compliance with all relevant safety and regulatory standards
• Perform internal quality system audit
• Provide training and support to production staff on the use of automated systems

Requirements

• Degree/Diploma in Electrical/Electronic Engineering or equivalent qualification
• Min 5 years of experience in automation, semiconductor or manufacturing industry or similar
• Proven track record of successfully implementing and optimizing automated systems
• Proficient in PLC programming, SCADA systems, and industrial robotics
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ is added advantage
• Excellent problem-solving, analytical, and project management skills
• Ability to effectively lead and motivate a team of automation professionals
• Familiarity with industry standards and regulations related to industrial automation

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Well Established Company
• Basic $3500 - $4500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Kaki Bukit
• Working hours : Normal working hours
• Training provided for those without/lesser experience

Job Responsibilities:

• Manage project and site activities, attend project meeting
• Perform equipment set up, start-up and commissioning
• Project implementation to ensure the successful and smooth delivery of systems/projects through effective planning, management, and deployment of resources
• Provide technical support and troubleshoot equipment faults after project handover
• Familiar with Singapore safety regulations and process. Prepare and submit project safety documents
• Manage project-related submission and paperwork by ensuring all necessary materials are current, properly filed and stored
• Works closely with the Project Team, Manufacturers and Vendors to deliver Customer’s expectation within timeline
• Involves in technical specifications review of the project scope
• Provide operational and maintenance training to customers
• Any ad hoc duties as assigned

Job Requirements:

• Minimum ITE/Diploma/Degree in Mechanical Engineering or its equivalent
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Benefits:

• Basic up $2000 - $2400
• 5day
• North Region

Job Scope:

• Create engineering drawings like single-line, layout, and schematics from sketches.
• Use AutoCAD make drawings based on instructions from the Designer Department.
• Review drawings for accuracy and completeness.
• Keep all project drawing revisions.
• Administrative work
• Organize documents following document control systems.

Job Requirements:

• Nitec in Engineering
• Autocad knowledge is added advantage
• Entry Level is welcome

Please submit your updated resume in MS word format by using the APPLY NOW BUTTON.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Cheang Wei Yang (R21102313)

Industry: Precision Engineering (Medtec)

Target Sector: Medtech

Location: East

This is a Regional BD / Sales Manager role that required to lead efforts in expanding company's precision engineering solutions tailored to the Medtech sector.

Key Responsibilities:

• Market Development: Identify and develop new business opportunities within the Medtech industry, including partnerships with leading medical device manufacturers.
• Client Relationship Management: Build and maintain strong relationships with clients, understanding their needs to provide innovative precision engineering solutions.
• Sales Strategy: Develop and execute sales strategies to meet and exceed revenue targets, including forecasting and pipeline management.
• Technical Collaboration: Work closely with engineering teams to ensure the alignment of technical capabilities with client requirements.
• Market Analysis: Conduct market research to stay updated on industry trends, competitor activities, and emerging technologies.
• Proposal Management: Prepare and present detailed proposals, quotations, and agreements to potential clients.

Requirements:

• Proven track record in sales or business development, preferably within the precision engineering or medical technologies sector.
• Excellent communication, negotiation, and presentation skills.
• Ability to manage multiple projects and deadlines effectively.
• Bachelor’s degree in related to Precision Engineering/Business, advanced qualifications are a plus.
• Willingness to travel overseas frequently for business matter.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

• Position: Quality Assurance QA/QC Engineer (MUST BE from Marine Engineering)
• Location: North Bridge Road (Walking distance from Fort Canning MRT Station)
• Working hours : 5 days / Monday - Friday - 9.30am -5.30pm
• Salary (Commensurate with experience): Basic up to $ 3700 + AWS + 14 days Annual Leave
• Duration : Permanent
• Industry : Global leader in Marine Lifting Equipment

Main Responsibilities:

• Perform inspection of incoming products, materials or customer items according to job project requirement
• Perform initial inspection and raise report
• Perform in-process inspection according to procedures and customer’s specifications. Raise report whenever necessary. Measure and record the dimension of components/parts using measuring instruments and analyse the findings for discrepancy
• Perform final inspection of items including dimensional and NDT to ensure that all quality requirements has been achieved. Analyse result and decide the acceptance level of the final product
• Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of Inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.

Requirements:

• Degree in Engineering or Diploma in Mechanical/ Marine Engineering or equivalent
• Experience in handling project Audit and liaise with internal & external auditor
• Knowledge in structural fabrication, piping isometric drawing and materials
• Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Project Engineer (Instrument & Control)

[Industrial | Commercial | Data Centre Industry]

• Basic: $3,000 - $4,500 (Depends on EXP)
• Working Hours: 5 Days
• Location: Woodlands

Interested applicants can sent your CV to email [email protected]

About our Client:
Our client is a leading organization specializing in engineering and technology solutions across diverse industries. They are committed to delivering innovative and efficient solutions for industrial, commercial, and data centre projects

Job Scope:

• Oversee all aspects of instrumentation and control (I&C) engineering within assigned projects.
• Coordinate with project teams and stakeholders to ensure seamless planning, scheduling, and execution of commissioning activities on-site.
• Supervise the installation of control elements and wiring, ensuring adherence to established quality standards and best practices.
• Address substandard workmanship by guiding contractors to rectify and improve installation quality for long-term operational reliability.
• Lead the testing and commissioning of chilled water control systems, conducting thorough functionality assessments and validations.
• Maintain comprehensive documentation and records related to testing and commissioning activities.
• Ensure the timely handover of control systems to the operations team, supporting a smooth transition.
• Provide prompt responses to operational issues, maintaining consistent and reliable control system performance.
• Configure and calibrate instrumentation to ensure accurate data transmission to control systems.

Requirement:

• Degree or Diploma in Engineering or an equivalent qualification from a recognized institution.
• Minimum 5 years of relevant experience working on industrial, commercial, or data center projects.
• Strong understanding of Mechanical and Electrical systems.
• Excellent organizational skills with keen attention to detail.
• Flexible, adaptable, and capable of thriving in a dynamic environment.
• Effective communication and facilitation skills for engaging with teams and stakeholders.
• Ability to work independently and collaboratively, demonstrating initiative and dedication.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kho Tong Hai | EA Reg No: R24122411

A Senior/Principal Process Development Engineer is responsible for developing or overseeing the development of chemical processes including low carbon processes as well as monitoring, troubleshooting and optimizing processes in a pilot plant leading up to a technology transfer. He/she will perform process design, engineering and scale-up of in a Low-Carbon Technology Translational Testbed (LCT3) on Jurong Island leading up to a technology transfer. This role requires good understanding and knowledge of the underlying key process/chemical engineering and scientific principles of low carbon technologies and uses computer aided engineering tools such as simulators, process and plant engineering tools for process development and engineering. This individual thinks analytically to solve problems and improve existing methods and processes.

Key Accountabilities

• Responsible for providing scientific and technical direction and/or development, design, and scale up of carbon capture, utilisation and low carbon hydrogen technologies
• Responsible for developing new projects, including timelines, milestones, methodological approaches, expected results and necessary resources.
• Responsible for the executing or planning/directing of laboratory-based or pilot-based experiments to support process development, scale-up campaigns and process optimisation leading up to technology transfer
• Lead or support multi-disciplinary team of scientist and engineers through technical challenges and contribute to the successful completion of projects
• Supervise and mentor junior process development scientists and engineers

JOB REQUIREMENTS

• Doctorate or Master’s degree in Chemical or Mechanical or other related engineering fields.
• Possess at least 10 years of experience in process development and engineering with good knowledge on process control and safety in the process or chemical industry
• Excellent working knowledge on various process technologies, scale-up & scale-down and process intensification methodologies or principles
• Has good working experience with relevant computer aided engineering tools including simulation (eg. Aspen Plus, AVEVA, Gproms etc.), and the use of detailed process models to support process design, scale-up and process optimisation during operations
• Experience in collaborating and has good appreciation with other related disciplines eg. electrical and instrumentation, automation, process safety etc.
• Ability to plan and/or execute experiments at laboratory and pilot scale (scale-up/scale-down) to support process development, troubleshooting and optimisation
• Working experience in a chemical production facility and familiarity with regulations, codes and industry best practices would be a bonus
• Working experience in process/plant engineering tools (eg. AutoCAD process/plant engineering, Aucotec Engineering Base, etc.) would be a bonus
• Possess technical leadership quality to lead team and/or supervise junior engineers
• Possess strong interpersonal, oral and written communication and organization skills
• Self-driven and meticulous individual who has the strong ability to multi-task and has good time management skills to deliver results under tight timelines
• Excellent written and oral communication skills for the timely documentation, presentation, and discussion of results in a fast-paced, multidisciplinary, team-based environment

about the role

• Technical support of field service engineers and customers when required
• Evaluating and establishing plastics machinery system performance specifications
• Manage customer specific projects & documents
• Provide technical documentation and training when required
• Product improvement

skills and experience required

• Master / Degree / Diploma in Engineering or relevant qualification
• Minimum 6 years of experience in heavy / laser marking / CNC / plastics injection machinery
• Provide technical support to customers, participate in the development of technical solutions, product demonstrations, and technical presentations
• Solid understanding of market trends and competitor activity in the plastic machinery sector
• Able to travel overseas for work if there is a need to (about 40% global)

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Job Purpose

The Professional Officers Division (POD) houses a centralized pool of academic staff under the Professional Officers scheme. Professional Officers come with specialised and deep technical skills acquired through extensive industry experience. They form the talent pool which brings a much-needed industry perspective to student learning. They facilitate applied learning and applied research in SIT, complementing the academic expertise of the faculty to bring industry practices and applications into the curriculum.

Professional Officers leverage on their industry experiences to create authentic learning environments, where discovery and innovation take place. They act as coaches and mentors to students during practical learning activities such as laboratory sessions, Capstone Projects and the Integrated Work Study Programme (IWSP). Professional Officers could also lead or work with faculty on industry innovation projects to provide solutions to the industry.

In addition to their role in applied learning and applied research, Professional Officers manage the centralised laboratory facilities and resources in SIT. With Technical Officers, laboratory safety professionals, and administrators in POD, they jointly develop central policies and processes for the safe and seamless operation of laboratories in SIT.

Key Responsibilities

• Design and teach labs & practice modules.
• Mentor students in Capstone Projects and the Integrated Work Study Programme (IWSP).
• Lead or co-lead innovation projects with industry.
• Manage labs and equipment to support academic programmes and applied research.
• Ensure safety in labs

Job Requirements

• A good degree in Building Services, Mechanical Engineering or a related field. Masters, PhD and/or relevant professional certifications like registered PE/CEng would be advantageous.
• Deep technical specialist with 10 or more years of working experience with mechanical systems in Building services environments or facility design consultancy would be preferred.
• Experience in following areas is highly desirable:
• Both design and management of mechanical building systems.
• Use of BIM software for design and engineering works and develop BIM models as well as knowledge in using CAD software such as REVIT, AutoDesk and ArchiCAD.
• Have working knowledge of building services systems such as Heat Ventilation Air Conditioning (HVAC), refrigeration, lift, heat exchangers, micro-climate, simulations, fire-testing and acoustic experiments
• Have prior working experience in building and facility management
• Having experience with materials and materials property as well as materials testing, and fire testing is advantageous.
• Extensive experience and knowledge of industry practices to bring industry perspective to SIT as well as experience with Green Marking and energy management is advantageous.
• Keen interest in innovation projects, with demonstrated ability in developing solutions to technical problems.
• Strong supervisory skills and enjoy working closely with students in an educational environment.
• Demonstrate proficiency to keep abreast of development in the field and pursue professional certification programs. Possess industrial certifications in relevant areas will be an added advantage.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Basic: $2,400 - $2,800
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683