Responsibilities

1)Prepare Equipment specifications / data sheets

2) Prepare cable schedule

3) Prepare voltage drop calculations for cable

4) Prepare lighting calculations

5) Prepare sub-station layouts

6) Prepare field layouts

7) Review inter discipline drawings.

8) Knowledge of specialized software (Lighting software etc.)

9) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

10) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

Auto cad, MS Excel, MS Word

Qualification

Preferably Bachelor’s degree in electrical engineering

Experience

Preferably 2-4 years of experience

Summary of the Job: (Primary function of the job)

· Produce complete control solution and Electrical design base on customer specification and
Sys-Mac standardized practice

· Integrate and interface of third-party equipment’s into electrical design.

Example barcode scanner, Robot controllers, motion controller, vision system etc

Job Responsibilities: (Key responsibilities of the job)

· Execute of circuit design according to international electrical standard

· Prepare circuit diagram for wiring execution

· Prepare Bill of Material (BOM), I/O List

· Initiate Purchase Request (PR) on order of electrical components to be used for the project

· Liaise with the Supplier, Customer, Design and Project Engineer for the electrical design and wiring execution of the project.

· Provide thorough testing of machine functionality to verify electrical wiring and safety completeness.

· Work with other members of the control department to continuously improve method of integrated control technology

· Prepare of Machine Operation Manual for the project.

· Execute Engineering Change Notice (ECN) for change of electrical design

· Maintain proper project documentation.

· Adhere to all health and safety rules and procedures

· Support in FAT / SAT tasks

Job Requirements

· Min Diploma in Electrical Engineering/Electronics/Automation Control or equivalent

· Min 3 years relevant experience in Automation project.

· Ability to design electrical circuit, perform electrical calculation

· Knowledge of Solidwork CAD will be an added advantage

· Experience in hand on wiring skill on panel or machine

· Knowledge of AutoCAD software will be an added advantage

· Able to perform assigned tasks independently or through team activities

· Self-motivated, highly resourceful and organized.

· Willing to travel overseas for assignments at short notice.

· Good interpersonal communication skills.

Responsibilities:

• Building relationships with potential clients and service partners.
• Create marketing plan with yearly goals for the business unit.
• Achieve sales targets while following company rules and ethical standards.
• Determine opportunities in tenders to expand the client base.
• Reach out to potential clients in commercial and industrial sectors.
• Lead tender processes, making sure to meet all requirements and deadlines.
• Develop clear value propositions that meet client needs.
• Negotiate terms for tenders and business proposals.
• Communicate with clients to understand their needs and address concerns.
• Conduct market research to understand industry trends and business opportunities.
• Maintain good relationships with internal and external partners.
• Review project expenses with operations teams regularly to maintain within budget.

Requirements:

• Degree in Marketing, Business Administration, or equivalent
• At least 5 - 8 years of corporate sales experience within facilities management/ construction-related industry
• Prior experience or proven record in securing significant projects will be an added advantage

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1654399

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• Lead the planning and implementation of project
• Plan and schedule project timelines, monitor project costing, work progress
• Ability to liaise with parties involved in the project (including clients, consultants, and sub-contractors)
• Ensure sound administration and communication flow between the project team and the other related parties
• Co-ordinate with and instruct sub-contractors / suppliers on timely delivery of materials and handover of projects with good workmanship
• Advise sub-contractors on construction methods
• Attend to consultants/client needs and requests and constantly monitor and report on progress of the project to all stakeholders
• Present reports defining project progress, problems and solutions
• Create and maintain comprehensive project documentation
• Ensure resource availability and allocation
• Monitor project plans from develop, monitor, control progress to deliver within the defined time frame;
• Prepare progress reports as defined by internal requirements, customers and management, giving up-to-date status of all aspects of the project
• Lead and manage a team of operational staff to meet the project objectives & targets;
• Oversee project to ensure completion on time within the scope and budget
• Recognize and solve potential problems and evaluate project / program effectiveness
• Observe proper construction safety measures and ensure safety compliance at site
• Perform any other ad hoc duties

Requirements:

∙ Bachelor's degree in civil engineering or its equivalent or higher.

∙ Comprehensive understanding of the contract documents (drawings and specifications), ,

construction sequencing and project schedule requirement.

∙ Preferred relevant work experience in Building Projects.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification, and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and the US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus and our people's experience in delivering consistent quality results for our clients over the past 20 years have been key to our success to date.

We are currently looking for a Technical Writer to join us in a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Develop new Master Batch Records (MBRs) by utilizing existing templates to support Technology Transfers.
• Generate high-quality documentation that complies with applicable standards and user requirements.
• Write and edit technical information and instructions to maintain factual accuracy.
• Work closely with SMEs from various disciplines on documentation requirements.
• Manage the lifecycle of MBRs, including creation, review, revision, and approval on a product campaign basis.
• Maintain a system to track upcoming changes for implementation in all future product campaigns.
• Ensure MBRs adhere to approved templates and structures.
• Deliver MBRs in strict accordance with the production schedule

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation, or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role

The Job
To support QC operations. Responsible for ensuring a product or service meets the established standards of quality.
Any other ad-hoc duties assigned.

Requirement

Diploma in Mechanical Engineering / Mechatronics Engineering

Full Training Provided

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job description:

• Supervision of workers and subcontractors on daily site activities
• Keep track of the site schedule to ensure works are on time
• Compliance to safe work procedures and maintain good house-keeping
• Ensure safety matters on site and quality of completed works
• Assist Project Manager in material and equipment acquisition

Job requirement:

Candidate must possess at least Primary/Secondary/"O" Levels

At least 3 Year(s) of working experience in the related field is required for this position.

What the role is

You will work in Tuas South Incineration Plant as Assistant Engineering Executive (equivalent to technician level) to ensure safe and effective operation and maintenance of the electrical equipment and systems in the incineration plant.

What you will be working on

You will be responsible for the following:

• Attend to daily preventive maintenance of assigned plant electrical, instrumentation and control equipment.
• Attend to daily job cards assignments of unscheduled outages of plant electrical, instrumentation and control equipment.
• Attend to overhauling of equipment/system as assigned by the Supervisors.
• Supervise the work of contractors.
• Assist the Executive Engineering Manager/Engineering Executive in carrying out preventive and remedial maintenance of plant electrical, instrumentation and control equipment.
• Carry out any works that will help to ensure and maintain the high availability of the plant electrical, instrumentation and control equipment.

What we are looking for

• NITEC in Electrical Engineering/Electrical Technology (Power & Control)/Mechatronics Engineering
• Working experience (1 to 3 years) in operation and maintenance is preferable. Candidates with no working experience are welcome to apply
• Must be computer literate
• Able to work independently
• A good team player with strong interpersonal skills
• Able to perform occasional night duties
• Able and willing to work on weekend and after office hours
• As part of the shortlisting process for this role, you may be required to complete a medical declaration and/or undergo further assessment.

To apply, please proceed to https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-TUAS-SOUTH-INCINERATION-PLANT-TSIP/Assistant-Engineering-Executive--Tuas-South-Incineration-Plant-_JR-10000024737

Job Description

· Sourcing of materials and manpower, commercial estimation and customer billing.

· Provide quotation independently for enquires from customers.

· Creation of Budget Costing Sheet before generation of quotation.

· Liaise with Sales, Purchasing, Engineering and Operations Department for all commercial related matters.

· Liaise with customers for job clarifications to prepare quotation.

· Carry out site inspection to understand the job scope for quotation generation when required.

· Hold inter-department discussions to understand the work that needs to be quoted for.

· Assist Sales by coordinating with our internal department in all aspects.

· Any other duties assigned by the HOD or Management as and when necessary.

Requirements

· Candidate must possess Tertiary Education

· At least 2 years of working experience in an administrative function

· Able to multi-task to meet quotation submission deadlines

· Team player with positive attitude at work

· Able to work independently

We are located at 11A Tech Park Crescent Singapore 637842 (Tuas South).

• o supervise and manage all related matters with regard to the day-to-day civil activities on the project with the objective of meeting the schedule, quality, and safety objectives.
• To manage and oversee the civil and recovered materials work in order to ensure the Project Safety, environmental, quality and Programme objectives are satisfied.
• To monitor materials on-site in order to ensure that the appropriate material is available to meet the construction program.
• To ensure all works are carried out in line with health and safety standards in order to provide high-quality work safely and efficiently.
• Should have experience working on industrial civil projects.

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

About the Role

The Project Sales Engineer will act as liaison between the company project team and clients, providing information on planning, delivering, testing, commissioning, service and maintenance repair related knowledge from securing to closing of a project.

Job Description:

• Develop rapport with customers and advance the sales funnel from initial contact to sales.
• Establish good contact with developers, architects and MEP consultants.
• Thorough understanding of relevant industry, products, equipment and services provided to client

Job Requirements:

• Minimum Degree in Mechanical Engineering or equivalent
• Excellent interpersonal and customer service skills
• Strong knowledge in HVAC/ACMV
• Prior experience in the construction related field is highly preferred
• Proficient with Microsoft Office Suite, AutoCAD and project planning related software are required to prepare for proposal, reports and logs

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

Key Requirements

1. Test Management Experience: Proven track record in test management, specifically for Data and Analytics projects. Experience in managing testing phases for large data platform migration engagements.
2. Power BI Expertise: Hands-on experience with Power BI for data visualization and analysis. Ability to develop and interpret complex reports and dashboards.
3. SQL and Database Knowledge: Proficiency in SQL, with a preference for candidates experienced in Databricks or Azure SQL. Understanding of database structures, theories, principles, and practices.

Key Responsibilities

1. End-to-End Test Management: Oversee all aspects of testing within large data platform migration projects, ensuring comprehensive coverage of data integrity, performance, and functionality.
2. Stakeholder Management: Liaise with business users and stakeholders to ensure testing objectives are aligned with business needs. Effectively communicate test progress, insights, and outcomes.
3. Test Strategy Development: Develop and document a comprehensive test strategy, detailing methodologies, tools, timelines, and resource requirements.
4. Reconciliation Strategy Preparation: Prepare a reconciliation strategy to ensure data accuracy and consistency post-migration. Implement checks and balances to validate data integrity.
5. Test Plan and Case Review: Oversee the creation of test plans and test cases, ensuring they are robust and cover all critical scenarios. Review and provide feedback for continuous improvement.
6. Test Team Management: Lead and manage a geographically distributed test team based in Singapore and India. Coordinate efforts, delegate tasks, and ensure efficient team collaboration and productivity.
7. Reporting and Analysis: Regularly report on test progress, challenges, and outcomes. Analyze test results to identify trends, issues, and areas for improvement.

Qualifications

• Bachelor’s or Master’s degree in Computer Science, Information Systems, or a related field.
• Strong leadership skills with experience in managing cross-cultural teams.
• Excellent communication and interpersonal skills for effective stakeholder engagement.

What we offer you

Come for the distinctive experiences you have helping forward-thinking corporations, non-profits, and governments push the boundaries of digital innovation. Stay for the limitless learning opportunities that encourage you to master Microsoft and pursue big ideas. Enjoy ambitious growth for yourself as part of Avanade’s people-first culture with benefits like employee share purchasing, flexible work arrangements, a commitment to diversity and inclusion, and competitive pay.

For GDPR reasons, kindly submit your application via the link below:-

https://careers.avanade.com/jobsenus/JobDetail/Data-Test-Manager/72617

Breaking the bias through strength and growth.

https://www.avanade.com/en/blogs/inside-avanade/women-at-avanade/breaking-bias-strength-growth

How to have the tech career your want.

https://www.avanade.com/en/blogs/inside-avanade/avanade-spotlight/have-the-tech-career-you-want/

~ Analyse risk management data.

~ Assess viability of workflow improvements.

~ Coordinate day-to-day fleet operational activities under supervision.

~ Maintain relationships with clients.

~ Manage compliance to risk management frameworks, policies and processes.

~ Manage information exchange between clients and business.

~ Manage issues arising from servicing client accounts.

~ Optimise utilisation of resources.

~ Oversee implementation of workflow improvements to improve efficiency.

~ Support HSSEQ department in ensuring ship operations are in compliance with internal company procedure

Structural Steel Engineer Detailer is responsible for drawing preparation, submission and detailed drawings for steel fabricators and steel erectors, prepares detailed plans, drawings and other documents for the manufacture and erection of steel members used in the construction and monitoring the progresss of fabrication of projects and ensure compliance with construction safety regulations and quality standards, to check the factory workers in safety postition,safety distance,make sure workers are in safe place for producing the work progress

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

Responsibilities

•Data Pipeline Development: Develop and maintain data pipelines that extract, transform, and load (ETL) data from various sources into a centralized data storage system, such as a data warehouse or data lake.

•Data Integration: Integrate data from multiple sources and systems, including databases, APIs, log files, streaming platforms, and external data providers.

•Data Transformation and Processing: Develop data transformation routines to clean, normalize, and aggregate data. Apply data processing techniques to handle complex data structures, handle missing or inconsistent data, and prepare the data for analysis, reporting, or machine learning tasks.

•Contribute to common frameworks and best practices in code development, deployment, and automation/orchestration of data pipelines.

•Implement data governance in line with company standards.

•Partner with Data Analytics and Product leaders to design best practices and standards for developing and productionalising analytic pipelines.

•Partner with Infrastructure leaders on architecture approaches to advance the data and analytics platform, including exploring new tools and techniques that leverage the cloud environment (Azure, Databricks, others).

•Monitoring and Support: Monitor data pipelines and data systems to detect and resolve issues promptly. Develop monitoring tools, alerts, and automated error handling mechanisms to ensure data integrity and system reliability.

Profile

•Minimum Diploma or Bachelors in Engineering or Business

•Proven experience as a Data Engineering role (3 years +), with a strong track record of delivering scalable data pipelines.

•Extensive experience designing data solutions including data modelling is required.

•Extensive hands-on experience developing data processing jobs (PySpark / SQL) that demonstrate a strong understanding of software engineering principles is needed.

•Experience orchestrating data pipelines using technology like ADF, Airflow etc is necessary.

•Experience working with both real-time and batch data is important.

•Experience building data pipelines on Azure is crucial. AWS data pipelines will be beneficial.

•Fluency in SQL (any flavour), with experience using Window functions and more advanced features is required.

•Understanding of DevOps tools, Git workflow and building CI/CD pipelines is essential.

•Domain knowledge of commodities, covering Sales, Trading, Risk, Supply Chain, Customer Interaction, etc. is highly desirable.

•Familiarity with Scrum methodology and experience working in a Scrum team can be advantageous. This includes understanding of Scrum roles, events, artifacts, and rules, and the ability to apply them in a practical context.

•Experience with streaming data processing technologies such as Apache Kafka, Apache Flink, or AWS Kinesis can be beneficial. This includes the ability to design and implement real-time data processing pipelines.

To maintain and repair hydraulic equipment

To replace seal kit

To replace hydraulic hose

To troubleshoot hydraulic circuit

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

PROJECT ADMINISTRATOR

Responsibilities:

• Assist project team in all administration functions and processes
• Prepare, organize, and distribute all necessary project materials
• Acting as the contact point for all project participants
• Maintain proper project documentation and filing.
• Coordinate with the project team on relevant document submission (Catalogue ,Operation& Maintenance Manual and Account opening)
• Undertake any other ad-hoc tasks / Project related administrative work assigned by the Project team

Requirements:

• Minimum Diploma or equivalent.
• Minimum 2 years of experience as a project Administrator or similar role
• Proficiency in Microsoft Suite (Word & Excel)
• Ability to work in a fast-paced team environment
• Good interpersonal, communication, multi-tasking and presentation skills
• Able to start work immediately or within short notice