Job Description:

·Assist Project Manager in execution of Project Management, Project Schedule and Coordination with Sub Contractors.

·Plan, implement and monitor work schedules.

·Liaise with Main Contractor on site requirements.

·Supervise Sub Contractors, Vendors on maintenance, site testing and commissioning activities and ensure quality standard.

·Take immediate corrective action to avoid any cumulative effect of such deviation and recover the delay to finish the tasks in time.

·Ensure project delivery according to dateline given, ensure cost control and profitability of project.

·Order material and equipment from vendors.

·Support site documentation requirements.

Job Requirement:

·Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Mechanical Engineering or equivalent.

·At least 3 years of working experience for Project Engineer/ Site Engineer in ACMV Industry is required.

·English is a must. (reading/writing/speaking)

·Proactive and ability to meet tight deadline.

·Possess good interpersonal, analytical and communication skills.

·An independent, highly motivated and a good team player.

Able to start with short notice.

All are welcome.

Job Type: Full-time

Working Hours: 5.5 days

Job Description:

• Responsible for all safety aspects of the construction site
• Prepare and conduct safety inspection
• Ensure all safety policies, procedures and regulations compliance with MOM Workplace Safety and Health Act
• Manage and lead WSH Coordinators
• Prepare safety reports and conduct internal safety related training
• Assisting company safety related certifications and awareness
• Other adhoc duties assigned from time to time

Job Requirements

• Registered WSHO with MOM
• Minimum Diploma in Workplace Safety And Health/ Occupational Health and Safety.
• Relevant working experience in construction industry will be advantageous

Description

• 5-10 years Experience in CMM inspection
• UG knwoledge add advantage
• Multi task work
• Prepare the Qc reports
• Maintain QC Instruments
• Desigin JIgs and Fixture
• Inspection of parts & tooling QC instruments

Requirements

Diploma/Degree

CMM with programming independently

experienced in DMIS software

Please contact

Ravi +65 90627715

Mom Lic No-08C4221

Reg No-R1102427

Plan, organize and arrange daily construction activities.

• Supervise the direct workers and to give instruction to the sub-contractors.

• Coordinate with land surveyors and sub-contractors on all setting out works.

• Liaise with QP(S) representative regarding standard of workmanship. To check if the works are carried out strictly in compliance with the contract specifications and requirements for the purpose of general quality control.

• Liaise with QP(S) representative for inspection of site works.

• Organize and supervise house-keeping and safety implementation.

• Control material wastage and unproductive deployment of workers.

• Report daily manpower and machinery to the Project Manager.

• Follow up and ensure environmental, safety and health policy compliance.

• Follow up and implement logistic planning set out by Planning Manager

Requirements

· Diploma/Degree holder in Construction/Building or related discipline.

· Minimum 5 years experience from Contruction background.

· Positive personality and good team player.

· Meticulous and responsible.

. Able to multi task and work in tight schedules

· Overseeing daily business operations.

· Training low-level managers and staffs.

· Improving revenue.

· Evaluating performance and productivity.

· Streamline business processes

· Drive business development.

. Exploring new businesses and negotiation of contract.

· Monitor financial performance, set budget and controlled expenses to provide financial stability.

· Ensuring deliver of quality meeting with cost effectiveness.

· Reviewing safety protocols

Responsibilities

• Managing a team of technicians and engineers who are responsible for installing, configuring, and maintaining the communication system. Ensure that the team is properly trained and equipped to deliver the service to customers
• Building and maintaining strong relationships with customers. This involves understanding their needs and expectations and ensuring that the system is meeting those needs
• Ensuring that the service delivery meets the quality standards set by the Authority. This involves monitoring performance metrics, identifying areas for improvement, and implementing corrective actions as necessary
• Managing the service delivery budgets, including resource allocation, cost management, and revenue forecasting
• Managing service delivery contracts with customers. This includes negotiating terms, ensuring compliance with contractual obligations, and managing customer expectations
• Identifying and managing risks associated with service delivery. This involves developing risk management plans and implementing mitigation strategies to minimize the impact of risks on service delivery
• Ensuring that the communication system is properly maintained on a regular basis. This includes conducting routine checks, inspections, and preventative maintenance to ensure that the system is operating at peak performance
• Diagnosing and repairing faults in the communication system. This includes troubleshooting, testing, and repairing any equipment or software malfunctions that may occur
• Managing spare parts and equipment required for the communication system. This involves maintaining an inventory of spare parts, ensuring that the required parts are available when needed, and ordering new parts as required
• Monitoring the performance of the communication system. This includes conducting regular tests and measurements to ensure that the system is operating within specified parameters and identifying and resolving any issues that may arise
• Ensuring that the communication system meets all safety regulations and standards. This includes ensuring that all equipment and installations are in compliance with safety codes, regulations, and standards

Requirements

• Experience with transmission network technology (optical/packet transport circuits)
• Experience managing external vendors, commercial negotiations
• Good financial and people leadership skills
• Working location is in Ang Mo Kio
• Singaporeans Only

Job Description & Requirements

Experience in tender project of metal, aluminum window, door, cladding, glass curtain wall, etc.

01. Taking care of primary costs, contracts of construction projects, estimating & planning costs.

02. Pre-tender stage preparation including quantity taking off, sourcing & comparison of quotation, preparation for tender submission.

03. Able to liaise with relevant consultants, main contractors, site personnel & authority to ensure project smoothness.

04. Able to read and understand shop drawings details.

05. Prepare claims, final account, settlement & sub-contract payments

A. Proficient in English / Mandarin/ AUTOCAD/ BIM MODULLING.

B. Diploma/Degree in Quantity Surveying / Construction Management or equivalent.

C. 5-15years of working experience in Singapore & the related field

D. Immediate availability is a big plus

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Description

Class 4 Driver (Full-Time / 14ft Canopy with Tailgate)

Job Description:

• Delivery/Collection using a 14-foot Canopy with Tailgate

• Provide friendly service to our customers

• Ensure goods are safely and timely delivered/collected

• Maintain and ensure cleanliness of company vehicle

• Assist in loading and unloading goods from warehouse to lorry to customer

• Strictly adhere to regulations and safety standards

• Deliver or Collect 5 to 10 D/Os per day

• Any other ad-hoc duties as assigned by managers or supervisors

Job Requirements:

• Must have a valid Class 4 Licence

• Physically fit

• Good knowledge of Singapore roads will be an advantage

• Responsible and positive working attitude

• Able to read simple English

• Willing to take responsibilities

• All are welcome to apply

Remuneration Package:

• Driver Salary up to: $4200

• OT payable

Additional Incentives:

• Cashcard, season parking & petrol provided by company

• Annual Leave

• Medical Leave

• CPF contribution

• Training Provided

ONLY responsible and hardworking individual are accepted into our team.

We care for our drivers and we will work as a team.

Responsibilities:

• Prepare Engineering Document (Technical Specification, Calculation, drawings, etc) inthe development of new designs and products.
• Generate new drawings and drawing changes including parts lists and Change Orders.
• Perform impact analysis on the arrangement and drawings.
• Plan and organise relevant design changes in cooperation with Ship Design Authority.
• Study/analyse/investigate/develop the design. Prepare technical documentation/guidelines for the work to be performed, according to established formats from the technicaldatabase, stipulated budget, time schedule and quality standards.
• Conduct Testing and validate technical interfaces for the work performed, according toestablished test procedures from the technical database.
• Liaise with ship-owners and Ship Design Authority to obtain approval on engineeringdeliverables.
• Manage the design schedule and ensure that design is carried out according to contractand regulations.

Requirements:

• At least a Bachelor’s Degree in Mechanical/Marine Engineering.
• At least 1-2 years experience in engineering design and/or Classifications Societies and/orNaval Engineering Officer.
• Strong knowledge of international design codes, Classification/Statutory Rules andRegulations.
• Keep abreast with Naval Classifications Rules, Military and Industrial Standards relevantto design activities.
• Engineering Design Project Management skills.
• Strong Leadership and Interpersonal skills.
• Software knowledge of AutoCAD
• Only Singapore Citizens will be considered for this position

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

• Overall, responsible for the Crewing and Vessel Operations.
• Supervise vessel in accordance with international regulations, local regulation/standard.
• Perform cost analysis, estimating expected costs for the vessel operation.
• Conduct risk assessment; provides recommendations for mitigations of risk.
• Handle questions, concerns, and complaints throughout the vessel management.

Requirements:

• Degree and above
• At least 5 years of handling dredging and coastal engineering projects and ship management experience.
• Strong in development of statements of qualifications and proposals.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

POSITION PURPOSE
Manage Marine Service matters for Southeast Asia markets, enhance service standards and implement 3S policy together with Units Sales and Parts. Provide quick response to market and serve as linking bridge between HQ and market

1)Assist superior to achieve set objectives
2)Liaise and communicate regularly with Distributors, dealers and HQ. Market monthly reports to superior and HQ.
3)Strengthen Service Network (3S and Service Standard)
* Continual education and training for distributors/dealers
* Support Distributors in their service activities including onsite field service
* Support workshop setup
* Assist and follow up distributors’ product registration status
4)Technical Support for Distributors and Dealers
* Support distributors and dealers for technical inquiries
* MI (Market Information) processing
* Prepare & issue Technical Bulletin for Dealers
5)Manage product registration and warranty administration
* Management of distributors and dealers product registration
* Warranty administration for dealers
6)Any ad-hoc duties assigned by superior

Job Requirement

Education and Qualifications: Diploma/ITC in Automotive/Mechanical/Marine engineering or equivalent
Practical Experience: At least 1 years’ Technical Service in Automotive/Marine Engineering
Professional Business Skills: PC literacy. MS office skills
Interpersonal & Social Skills: Good oral and written communication skills. Resourceful team player and yet able to work independently
Computer Skills: Microsoft Office-suite
Other Requirements: Able to travel, Passion in marine industry

Interested applicants pls send in a copy of your resume with your current, expected salaries and availability in Microsoft Word format to Low See Wei (R1551122) for immediate processing.

Kindly indicate in your email subject title as "Job Application for 18926 Technical Service Executive (Automotive/Marine Engineering, Motor) SW228"

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities

Thank you.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Job Duties

• Day to day routine maintenance & rectification of aircraft defects
• Ensuring all work is carried out in accordance with approved maintenance data, company, authority and customers’ requirements
• Performing aircraft release to service certification (CRS) for maintenance and repair of aircraft according to the Company authorization issued by Quality Department
• Assisting in the forecasting of manpower, spares & equipment needs
• Ensuring that all staff under his control observes safety precautions, reporting of unsafe working condition & operation
• Assisting in the investigation of incident/accident reports and ensuring corrective actions are implemented
• Ensuring that tools & equipment under his contro are properly maintained, calibrated and correctly used for the jobs
• Ensuring action is taken at all times to maintain the aircraft on schedule
• General supervision, control & discipline of staff under his charge
• Performing other duties, as and when required

Job Requirement

• Posseses relevant Licences from the Aviation Authority, with at least 7 years of relevant working experience
• Good communications and interpersonal skills
• Meticulous and organized

Job Responsibilities:

1. Lead a team of professional & technical trained staff in planning, daily operations, liaise with clients, consultants, sub-contractors & relevant authorities.
2. Ensure the construction project complies with all building codes and any other legal or regulatory requirements.
3. Responsible for overall project planning, scheduling, monitoring, and updating to meet targets.
4. Manage the project sites and operations by overseeing the day to day running of all matters related to the construction of the project.
5. Assist in the planning and sequencing of construction operations.
6. Reporting to Project Director / Management.
7. Any ad-hoc task assigned by the Company.

Education Required:

1. Possess Degree in Civil Engineering recognized by Singapore PE Board OR
2. Degree in Civil Engineering not recognized by Singapore PE Board with valid Structural Steel Engineers (StEr) (SSSS) certificate and membership.
3. Relevant certificate – BCSS / CSCPM – etc

Experience Required:

1. Minimum of 3 years' experience in Structural Steel & Metal work
2. Knowledge of AutoCAD, Microsoft Project, Microsoft Office is a must. Others acquired skill will be an added advantage.

Our client is a multinational company in the Manufacuting industry. Due to their current expansion plan, they are looking for an Engineering Manager to join their Engineer team, in hopes of developing the current high performing team. They are located in the East – easily accessible.

The Engineering Manager's responsibles are:

• Supervise a team of Project Managers / Engineers when new projects are introduced into the company
• Liaise with automation projects to improve production efficiency and reduce manual labour
• Corporate with Management and relevant department to evaluate project specification
• Analyse projects in terms of feasibility, risk and challenges
• Handle and supervise automation projects to improve productivity
• Handle and plan for Project expenses to ensure costs are within set budget
• Develop and execute Programs to build and develop Engineering strength
• Liaise with training to engineering department and production staffs in relevant topics that can enhance their capabilities and knowledge

Requirement

• At least 5 years of relevant experience in Molding/ Medical Devices industry
• Minimum Degree in any discipline
• Familiar with technology for plant development
• Knowledge in Automation design and concept

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

My client is the fast-growing tech company with offices globally. They are looking for Technical Manager who is specialize in backend tech stack and to join the team in Singapore. The role is expected to build and manage the team, to be responsible for the architect and team management. This is an excellent opportunity to join the well-established company in Singapore and like-minded team in its hyper growth stage.

Responsibilities:

• Manage and build the backend team according to business requirement and technical roadmap
• Collaborate with product managers, engineering team, and senior management team for technical roadmap
• Responsible for the architecture, development, implement user interface components
• Provide vision, design and develop in keeping up to date and cutting-edge system solutions in building interactive web applications
• Adhere to high-quality development principles while delivering solutions on-time

Qualifications:

• Bachelor’s/Master’s degree in computer science and engineering, or related field with equivalent work experience
• At least 8 years of experience working in backend development, with proven leadership experience in tech industry
• Proficiency with C++/Golang/Python/Java/Rust and modern architecture
• Efficiency in handling technical issues, producing new design ideas and substitutions where required
• Strong communication to collaborate with stakeholders in all levels – (business, product, design, and development)

It’s an excellent opportunity to join the expanding team in its rapid growth stage, please don’t hesitate to apply if it sounds like your next move. Please note that only shortlisted candidates will be contacted. Appreciate your understanding. Data provided is for recruitment purposes only.

About Us

Dada Consultants was established in 2017, with the commitment of providing the best recruitment services in Singapore. We are comprised of a dynamic head-hunting team dedicated to sourcing for highly competent professionals in IT industry. We provide enterprises with customized talent solutions, and bring talents to career advancement.

www.dadaconsultants.com

EA Registration Number: R2197058

Business Registration Number: 201735941W. Licence Number: 18S9037

Job Responsibilities:

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Involved in preparing relevant QA/QC reports
• INvolved in implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to building handover to owners.
• Attend to client ’s defects during Defect Liability Period.
• Assisting in handover of the common areas to management team.

Job Requirements:

• Min Diploma or Degree related to QA/QC or Engineering / Construction related field
• Prior experience related to construction industry (HDB, Condominium projects etc.) is added advantage
• Good knowledge of construction quality control/assurance is necessary

Responsibilities:

• Assists in planning, controlling and coordinating of mechanical and electrical works
• Checks discrepancies between project drawings and technical specification
• Liaises with site engineers to ensure a smoothly workflow
• Conducts M&E coordination meeting
• Schedules and monitor M&E work progress
• Monitor M&E works documents and shop drawings coordination
• Liaises with clients, consultants, subcontractors and suppliers
• Negotiate approval for M&E changes to the project

Job Requirements:

• Diploma / Degree in Engineer or equivalent
• Mechanical / Electrical Engineering or equivalent
• Familiar with construction site activities
• Co-ordinate, liaise & communicate with people of all levels
• Minimum 3 years relevant experience in building construction
• Able to work under tight schedules

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Technical Service Technician
Working location: Ang Mo Kio
Working date and time: 8.30am-6.15am (Mon-Fri)
Salary: $2,000-$3,000 + AWS + Bonus

Responsibilities

1. Machine set up, installation and training
2. Lapping and polishing machine operation & RD lab jobs.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Training will be provided.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities:

• Review and study the contract drawing for construction before construct.
• Check and ensure all the construction drawing and materials to meet the required standard.
• Assist Project Manager on all site work, supervision works, schedule and planning for project progress.
• Manage daily work on site, including supervising and monitoring the site labour force.
• Discuss with Head of Department for site problems and technical difficulties and resolve on site and coordinate with M&E team for site progress.
• Attend consultant meeting and highlight the discrepancies to ensure all works are carried out in accordance with the drawings, specifications and construction procedures and BCA requirements.
• Liaise and conduct sub-cons meeting for daily work.
• Prepare and submit drawings and documents according to the project requirements.
• Inspect all Structural and Architectural work with RE/RTO and kept record the entire document properly.
• Prepare paperwork for ISO and GGBS documentation for BCA audit.
• Filing the document of project paper works and As-built drawings up to date.
• Ensuring compliance to Workplace Safety and Health Acts
• Attend WSH meeting, daily toolbox meeting and Site WSH inspection.

Requirements:

• Diploma in C&S Engineering / Architecture or equivalent
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Job Responsibilities:

· Assist in all administrative duties assigned.

· Assist Administrative Manager in appointment/administrative duties.

· Any ad hoc duties assigned.

Requirements:

· GCE ‘O’ Level or above

· Minimum 1 year of Admin experience

· Proactive, committed and able to work in fast paced, high volume processing working environments

· Positive attitude, hardworking, possess initiative & ability to work independently

· Computer literacy in Microsoft Excel & Microsoft Words.

· Ability to organize and manage multiple priorities and able to meet deadlines

· Meticulous and detailed oriented, good filing system

· Possess and inquisitive and analytical mind and proactive in problem finding and resourceful in problem solving

· Excellent inter-personal skills, problem solving skills and a team player

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Responsibilities:

· Responsible for assuring the implementation and compliance with the Quality Assurance System.

· Control and monitor all activities related to Quality Management System (QMS).

· Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents

· Responsible for the quality and workmanship of every activity, through knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.

· Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.

· Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP

· Liaise the Technical Engineer for submission of material submittals to Consultant

· Other ad-hoc duties assigned by Senior Manager (QA/QC).

Requirements:

· Diploma in C&S Engineering / Architecture or equivalent

· Minimum 2 years of QA/QC experience in construction industry

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

To understand the day-to-day job requirements, as well as learn skills required of a sales and marketing professional in electrical and lighting field (industrial/commercial and residential). To adapt and work well in a fluid and collaborative environment, as well as be able to work under pressure with intight timelines.-Drive Marketing Campaigns (Off line & online ) - Generate design concepts and ideas for marketing campaigns and communication materials and increase sales

• Must be familiar with class 3 manual transmission small goods van
• Must be familiar with road
• To work on Tuesday, Wednesday, Thursday, Friday (9am to 6pm) / Saturday (9am to 3pm)
• Vehicle not allowed to drive back.

1. Main role is to drive van point to point, there will be another worker tag along to load and unload carry goods (Light duty rack)
2. Assist worker doing on-site assembly (Simple assistance such as holding lift, holding item, looking after item)

Descriptions

• Perform automation machine assembly, commissioning and installation.
• Handle, analyze and resolve machine issues during testing.
• Operation of Facilities equipment.
• Perform preventive and corrective maintenance of Facilities system when needed.
• Organizes repair works according to the schedule of the department job allocation.
• Supervises group of workers to perform mechanical jobs and gives guidance.
• Response to operations/equipment issues
• Support all manufacturing and related areas, ensuring smooth operations and uphold environment safety
• Support to execute document change when needed
• Ad hoc assignment by Supervisor

Requirements

• At least 2 Year(s) of working experience in machine mechanical part assembly.
• Ability to read and interpret electrical and mechanical drawing.
• Possess good communication and interpersonal skill
• Able to generate simple reports.
• Ability to work independently and with all levels.