To assist WSH Officer in managing Workplace Safety & Health issues in Construction environment

· Monitor and report all work or operation that violate safety procedures, and instructions, or would endanger life and property

· Prepare daily/weekly workplace safe/unsafe observation report

· Accident and incident investigation

· Report all incidents and accident as per site/project and company’s emergency reporting protocol

· Conduct safety training for employees

· Conduct regular site checks and take appropriate corrective actions

· Perform other related duties as directed that correspond to the overall function

· At least 3 years of working experience in the construction industry

· Possess Certificate in Workplace Safety and Health (WSH)

· Good knowledge in ISO and OSHA safety standards

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Role Summary:

The Lead Cost Controller will oversee and manage all cost control activities for FPSO projects, ensuring accurate cost forecasting, budget management, and financial reporting. This position will work closely with project management, engineering, and procurement teams to deliver cost-effective solutions and maintain project financial health.

Key Responsibilities:

1. Cost Control & Management:Develop and maintain project cost control systems, procedures, and tools.
   Establish project budgets, monitor expenditures, and update cost forecasts regularly.
   Ensure alignment of project costs with project schedule and scope.
   
2. Budget Preparation & Monitoring:Collaborate with project managers and other stakeholders to prepare detailed project budgets.
   Track and analyze variances between planned and actual costs, providing actionable insights to mitigate overruns.
   
3. Forecasting & Reporting:Prepare monthly and periodic cost control reports, including earned value analysis (EVA) and cost-to-complete forecasts.
   Ensure all cost data is accurate and delivered to stakeholders in a timely manner.
   
4. Risk Assessment & Mitigation:Identify potential cost risks and provide recommendations for mitigation strategies.
   Manage contingencies and ensure adequate funding is allocated for unforeseen changes.
   
5. Stakeholder Collaboration:Act as the focal point for all cost-related activities within the FPSO project.
   Liaise with procurement, engineering, and construction teams to ensure cost integrity.
   
6. Compliance & Standards:Ensure adherence to company policies, industry standards, and regulatory requirements in cost management practices.
   Support audits and reviews to verify the integrity of cost data and reports.
   

Qualifications & Experience:

• Education:
  Bachelor’s degree in Finance, Accounting, Engineering, or a related field. Professional certifications (e.g., CIMA, CPA, PMI, or equivalent) are preferred.
• Experience:Minimum 8-10 years of experience in cost control or financial management, with at least 5 years in the oil and gas industry.
  Proven experience in FPSO projects is mandatory.
  
• Skills & Competencies:Strong knowledge of cost control software/tools (e.g., Primavera, SAP, or similar systems).
  Proficient in Microsoft Excel and other financial modeling tools.
  Excellent analytical, problem-solving, and decision-making skills.
  Strong communication and interpersonal skills to interact with cross-functional teams.
  Familiarity with project management methodologies and tools (e.g., PMP, PRINCE2).
  

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Responsibilities

• Must have experience in aluminium & Glass industry work
• Able to work independently with Main Contractor, Architect to resolve site issues
• Prepare tender submission;handle progress claims and progress payment, VO & finalization of accounts
• To attend site meeting whenever is required
• Materials ordering for sites.
• Any ad-hoc duties assign.
• Estimate the overall cost of the project

Requirements:

• Degree/ Diploma in Building/Quantity Surveying
• At least 5 years QS experience in alum windows & doors
• Meticulous, Independent with good communication skills
• Proficient in AutoCAD and Microsoft Office programs (Excel, Word, e.g.)
• Familar with alum profiles
• Able to work under pressure and tight deadline;

Responsibilities:

• Manages and coordinates a team of drafting and detailing engineers, cost estimators, fabrication and project team

• Ensures proper planning and execution of projects to meet or exceed performance indicators in terms of quality and timeframe

• Oversees the planning of project operations and resolves technical and scheduling issues on-site

• Main point of contact and liaison between project teams and the client's representatives, consultants, and relevant authorities

• Review contract, design drawings, specifications, and bid documents

• Implement effective contract and claim management to increase the contractual margin and protect the Company against liability claims

• Site visits to review the progress of your job

• Monitor compliance of work with workplace safety and health regulations

• This job description is not all-inclusive and may include other duties as assigned

• Candidates should be able to manage multiple projects of various sizes and levels of complexity.

Requirements

• Minimum 5 years of Project Management experience.

• Diploma or equivalent Bachelor's Degree in Construction Management, Structural/Civil Engineering

• Experience with fabrication and installation of structural steel and miscellaneous metals

• Strong analytical, written, and verbal skills.

• Strong computer skills, including AutoCAD, Microsoft Office Suite Project setup

Kindly provide your expected salary, last drawn salary, and reason for leaving in your CV/Resume

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

• Fun & Energetic Team, 5 days week, Attractive Commission
• Career Growth & Development, On job training & learning
• Flexible Working Hours (no OT), Work life balance

Job Description

At Aesperon Academy, we offer a range of courses such as the following:

• Building and Construction Authority (BCA) approved CoreTrade courses
• WSQ Corporate Courses
• Safety Courses
• We are also a Workforce Skills Qualifications (WSQ) Approved Training Organisation.
• The Sales Executive is responsible for obtaining new leads and following up with prospective and existing clients.
• A comprehensive training program will be taught by our experienced Sales Team leader and guidance will be provided. We will introduce you to the list of courses on offer and teach you tried-and-tested techniques for better customer acquisition!
• Motivated and Driven
• Comfortable speaking to potential clients
• Detailed

• Benefits:
• You will have the chance to learn other roles if you're suitable
• A promotion to a leading role if you exhibit relevant competencies
• Personal transport preferred.
• Commission base.

Requirements

• Possess 'O' Levels Certification and above
• Working Location: Changi
• Working hours: 9am to 6pm (Monday to Friday)

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities:

• To ensure timely service and customer’s satisfaction are met eg follow up on customers' enquires and quotations, processing orders, invoicing, prepare sales reports, liaise with customers and internal departments to ensure orders and delivery schedules are on time.

Requirements:

• Fresh degree holders are welcome to apply.
• Training will be provided.
• Proactive, independent, team player.
• Able to cope with fast pace environment.

We are seeking a skilled Observability Engineer with at least 2-3 years of experience in observability to join our dynamic team. In this role, you will be responsible for implementing, managing, and optimizing observability tools. You will work closely with cross-functional teams to ensure that our systems are monitored effectively, and issues are identified and resolved proactively.

Key Responsibilities:

• Design, implement, and maintain observability frameworks using tools such as Prometheus, Grafana, ELK Stack, tableau or similar.
• Design, implement, and maintain Monitoring tools such as BMC, CA, SolarWinds, SCOM, Dynatrace, Datadog or similar.
• Create and manage dashboards, visualizations, and reports to communicate system health and performance metrics.
• Collaborate with the sales team to understand client requirements and demonstrate how our observability solutions can address their specific needs.
• Prepare and deliver presentations, demos, and workshops to potential clients showcasing the capabilities and benefits of our observability tools.
• Troubleshoot and resolve tools-related issues in a timely manner.
• Assist in the training and mentoring of team members on observability and monitoring tools and practices.

Job Requirements:

• 2-3 years of experience in software development, Implementation, operations, or a related field with a focus on observability tools.
• Proficiency in implementing and managing observability tools.
• Solid understanding of cloud platforms (AWS, Azure, GCP) and containerization technologies (Docker, Kubernetes).
• Experience with scripting languages (Python, Bash, etc.) for automation tasks.
• Knowledge of best practices in monitoring, logging, and incident management.
• Strong analytical skills with the ability to diagnose issues and propose effective solutions.
• Excellent communication and collaboration skills, with a proactive approach to problem-solving.
• Technical experience in Enterprise Monitoring tools such as Dynatrace, Grafana, BMC,
• Knowledge of Automation tools, Cloud Technologies and DevOps Concepts, Open systems and Networking Technologies
• Good knowledge in various monitoring tools e.g. BMC, SolarWinds, CloudWatch and Azure.
• Experience with configuration management tools (Ansible, Terraform, etc.).
• Familiarity with APM (Application Performance Management) tools such as New Relic, Dynatrace, or similar.
• Understanding of network protocols and architectures.
• Experience with orchestration tools (e.g., BMC, Kubernetes, Apache Airflow, Jenkins) to create and manage automated workflows for deploying, monitoring, and scaling observability solutions.

Preferred Qualifications:

• Proficiency in observability tools (e.g., Grafana, ELK Stack, Datadog, Prometheus etc).
• Proficiency in ITOM tools (e.g., BMC, Dynatrace, CA, SCOM, IBM, SolarWinds etc).
• Strong understanding of monitoring and logging frameworks.
• Experience with distributed systems and microservices architecture
• Ability to write scripts for automation and data analysis.
• Experienced in cloud platforms (AWS, Azure, GCP) and their monitoring services.
• Experience with CI/CD pipelines and infrastructure as code (IaC) tools like Terraform or Ansible
• Relevant certifications in cloud computing, DevOps, or observability tools can be a plus.

Work location: Jurong East

Overall Job Objectives

Assist the project manager, lead the team to complete the project manager's work objectives and progress. Assist Bar Bending Schedule (BBS) and receive the rebar sent to the site. Record the necessary data.

Core Responsibilities

1. Attend daily toolbox meeting and workers briefing at 7:30 a.m.

2. Assist BBS to receive reinforcement materials sent to the site

3. Familiar with architectural drawings and structural drawings

4. Communicate and implement project manager's objectives to ensure work progress, quality and safety meet customer requirements.

5. Teach and personally demonstrate how to erect stirrups, install and bind rebar.

6. Check the size, quantity and spacing of steel bars. Ensure the quality of completed rebars meets the requirements of consultant's Specification and PE Design Requirements.

7. Following RE or RTO on site to carry out the inspection and rectification the defect, then hand over to the concrete supervisor for concrete casting.

8. Achieve efficiency targets set by the company and site Project Manager.

9. Report daily progress, quality, safety and efficiency to the project manager before the end of work.

Job Specifications

1. Passed the test of steel bar skills of BCA. Qualified BCSS certificate.

2. Able to read/understand/execute work based on construction drawings, Basic drawing recognition skills, able to read the material list and drawings of BBS.

3. Good communication, interpersonal and collaboration skills

4. Minimum 2 years of relevant experience.

Job Description:

• Packing & moving related functions.
• Contribute actively during the safety committee meetings in the Company.
• Coordinate with customer and other stake holders to ensure that jobs are carried out smoothly, timely and safely.
• Monitor and guide team members to understand their job scope and ensure that they comply and follow all safety procedures and Company’s procedures.
• Exhibit high level of safety knowledge and awareness.
• Assist in the planning and execution of assigned job.
• Lead and guide new packers on basic safety knowledge and basic job skills
• Any other roles and responsibilities as assigned by Management.

Requirement:

• Min N level
• Possess good working knowledge in Ms Office words/ excel
• Proven experience in logistics and operations, with supervisory responsibilities preferred.
• Strong organizational and time-management skills.
• Excellent communication and interpersonal skills.
• Ability to work both independently and collaboratively within a team.
• Problem-solving skills with a focus on operational efficiency.

Career Highlights:

• Good career advancement
• Competitive compensation benefits
• Company’s transport available

Job Description:

• Lifting supervisors appointed for tower or mobile cranes at the worksites must complete the Lifting Supervisors Safety Course conducted by an accredited training provider.
• To review and advice the lifting plan
• Observe, coordinate and supervise all lifting activities in accordance to the Lifting Plan
• Briefing all lifting team members (i.e., crane operators, riggers and signalmen) on the Lifting Plan, risk control measure and safe lifting procedure before the commencement of any lifting operation
• Ensuring that only registered crane operators, appointed riggers and appointed signalmen participate in any lifting operation involving the use of mobile and tower cranes
• Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes
• Be present during all lifting operations : To take suitable measures when unsafe conditions are reported. Also, to rectify the conditions so that the lifting operation can be conducted safely
• Contribute and execution of risk assessment, job safety analysis, safety procedures / check list, safety records and documentation.
• Daily safety audit on all lifting equipment, gears and devices included. Prior to lifting, check on capacity of lifting equipment, gears, devices, grounds, surrounding, overhead obstructions and weather conditions.

Job Requirements:

• At least 3 years of experience as a lifting supervisor.
• Experience and knowledge in heavy lifting.
• Adaptable to fast paced work environment, able to work under pressure, able to finish assigned work on time
• Excellent written and good communicative skills, able to interact with people of all levels and teamwork
• Obtained Lifting Supervisors Safety Course and Work-At-Height Certificate

We are looking for a dynamic and detail-oriented Project Coordinator to oversee and support electrical projects. The ideal candidate will work closely with project managers and field teams to ensure projects are executed efficiently, on time, and within budget. This role requires excellent organizational skills and a strong understanding of electrical project processes.

Key Responsibilities:

• Support project planning, including scope, timeline, and budget development for electrical projects.
• Coordinate with engineers, technicians, subcontractors, and clients to ensure smooth project execution.
• Monitor progress, track project milestones, and maintain detailed project documentation.
• Assist in the procurement of materials and equipment for electrical installations.
• Ensure compliance with safety standards, regulations, and quality guidelines.
• Schedule and organize project meetings, preparing agendas and recording minutes.
• Identify potential project risks and assist in developing mitigation plans.
• Manage communication between all stakeholders, ensuring transparency and clarity.
• Assist in preparing project reports, invoices, and other required documentation.

Responsibilities:

• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in all electrical engineering designs, calculations, preparing bill of materials including measurement and sizing, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in construction, installation, testing and commission activities.
• Able to use autocad/drafting software and also guide drafters for drafting

Requirements:

• Good team player. Can work with others harmoniously.
• Willing to learn new activities.
• Good communication skills in English both written & spoken.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Must know how to operate and draw in AutoCAD.
• Must know basic fire and gas detection knowledge.
• Must know how to operate MS office (minimum Word and Excel).
• Prepared to travel if required for overseas meeting
• Min Diploma/ Degree in Engineering or related field.

Job Description & Requirements

• Monitor, coordinate and keep track of the site work progress to ensure all work is carried out in quality and efficiency manner.
• Assign job task to workers and conduct daily briefing
• Ensure compliance of WSH Regulation & Safety Procedures
• Close monitoring of jobs and provide necessary updates to internal division.
• Responds to customers' feedback and inquiries, provide good client support and maintaining a good relationship
• Identifying and resolving workplace problems.
• Providing reports and activity updates to management
• Performs any other related duties as assigned
• Coordinate incoming and outgoing inventory deliveries

Summary of the Job: (Primary function of the job)

• Lead a team of engineers, technicians and sub-contractors in

assembly, debugging and commission of SI automation projects

• Ensure work place safety, cleanliness, discipline, punctuality,

efficiency, and good workmanship.

Job Responsibilities:

• Lead and ensure workplace safety to be maintained at all times

• Plan deployment for projects to ensure maximum utilisation of

resource

• Lead and coordinate the setup, assembly, testing, debugging and

commissioning activity to ensure best efficiency

• Provide solutions and give guidance to the team for the technical

and non-technical issues

• Lead and ensure production floor disciplne and work punctuality

• Manage common tools, equipments and consummables

• Provide regular trainings on debugging and best practice in

workmanship

• Lead and ensure practice of 5S

• Interview, hire, train, and mentor the engineers and technicians

• Provide regular performance updates to the manager

• Perform additional duties as assigned

Job Requirements:

• Bachelor degree or Diploma in engineering or related field of study

• Minimum 10 years supervisory experience in assembly and setup

in system integration for factory automation projects

• Analytical problem-solving skills with an impeccable attention to

detail

• Demonstrated strong leadership quality

• Previous experience in SI (System Integration) environment

preferred

Job Description

• Responsible for the company’s organization, management, and marketing

• Responsible for evaluation of company’s current performance and future expansion program

• Responsible to take policy decisions and give directive for company’s growth plans

• Authorizes Quality, Safety and corporate wide policies

• Give directions and key decision regarding the company business which includes operations, business

development, finance, commercial, technical, human resources, etc

• Oversee group business including overseas offices

• Build effective client relationships and expand client base

• Oversee the implementation of internal control to adhere to corporate governance

• Ensure good communication in social and public relations that are presented to relevant stakeholders

• Represent the Company to financial community, major customers, government agencies, shareholders and the

public, as and when required.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Project Management

• To resolve all technical and non-technical issues.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Reduce material wastages on site and maximise usage of machineries/equipment.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Meet targeted progress of works so as to achieve the intended cash flow.

Technical Understanding

• Understands the drawings and scope of works
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Job Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Experience in leading a team or subcontractors would be advantageous.
• Strong communication skills.
• Highly committed and motivated individual.
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification will be considered for Project Manager post.
• Fresh graduates are also welcome to apply.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Duties & Responsibilities

• Responsible for full sets of Accounts
• Prepare month-end and year-end financial statements
• Prepare financial statements, payments, AR billings, journals, monthly schedules, bank statement reconciliations, staff reimbursements, GST submission etc.
• Prepare management reports i.e. project analytics, revenue, costs, cash flows, AP, AR, Related Party Transactions reconciliation for group reporting & etc.
• Liaise with internal and external parties on billings, payments, reconciliations, audit, taxation matters
• Assist in banking matters, account opening, LC, insurance bond & etc.
• Assist in corporate secretarial activities
• Coordination for physical inventory and fixed assets count on an ad-hoc basis
• Responsible for statistical filing
• Hands-on and work with other team members for finance deliverables

Requirements

• Accounting Degree, Partial ACCA or other relevant qualifications
• Minimum 3 years of experience in handling full set of accounts with reputable companies
• Proficient in MS Excel, Words, PowerPoint & etc
• Good communication, organization and administration skills
• Hand-on experience in Navision accounting software is an advantage
• Experience in construction industry is an advantage