• Provide driving service in/out of workshop
• To shift vehicles in and out of workshop for repair and services after registration at counter
• To send vehicle to LTA inspection
• To arrange and park vehicle properly and orderly in docking area
• To conduct road test for vehicle as required
• To assist in handling/taking over of courtesy vehicle
• To assist in checking courtesy vehicle status
• To assist in collection and sending vehicles outside workshop
• To ensure docking area tidiness and cleanliness
• To assist Service Department with adhoc trips such as collection of payment/spares
• To assist in washing/cleaning of Service Department courtest vehicle

Requirements

• Class 3 & 4 Driving License

Responsibilities:

• Responsible for pre and post contract QS services;
• Handles interim and final payment claims and feedback comment to payment response to Management
• Job site visiting and monitor site progress
• Responsible for quantities taking-offs, work out variations claim, verify measurements with the client
• Handles contract administration and settlement of final accounts with clients & subcontractors;
• Monitors project phasing & payments;
• Preparation & Revision of Construction Programmes & follow-up delay claims

Requirements:

• Degree in Applied Science in Construction Management or Diploma in Building Services / Mechanical / Electrical engineering
• Able to meet challenging work demands and tight schedules
• Good interpersonal and communication skill
• Good command of spoken and written English
• Independent and resourceful

Job Description:

1. Carry out maintenance, repair and overhaul work on heavy vehicles, has diagnostic capability and able to perform major repair on engine and transmission

2. Ensure high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.

3. Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.

4. Complete work order for each vehicle and unit serviced.

5. Adhere to defined guidelines in regards to safety, orderliness and etc.

6. Performs ad hoc duties as assigned by Superiors

Job Requirements:

1. Academic qualification: NTC 2 / Diploma Automotive Technology or equivalent

2. Competent in basic English (verbal & written)

3. Prefers candidates with at least class 3 driving license

4. Prior experience of at least 2 to 3 years in performing automotive service repair (commercial vehicle)

Job Title

Engineer

Occupation

ENGINEER

Job Description & Requirements

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

Work Location: 8 Tuas Avenue 18, Level 5, Singapore 638892 (Company bus at 0800hrs Tuas Crescent MRT Exit B bus stop)

Working Hours: Monday to Friday: 08:30 AM - 05:30 PM

• Prepare monthly group consolidated cashflow for the risk assessment on the group cashflow
• Monitor bank service fees and address quality issues
• Manage and strengthen banking relationships
• Review the banking facilities on new requirements and rates competitiveness
• Preparing Trade Finance & Hire Purchase submission
• Handling of Shipping documents and discrepancies
• Managing opening & closing of bank account, update of bank signatories and bank token management
• Prepare and coordinate board resolution and minutes for all finance related matters
• Managing FX hedging and borrowing rates
• Ensure adequacy for banking facilities to cater for business expansion
• Collate P&L and BS analysis to track and ensure compliance of bank covenants
• Prepare and submit monthly treasury report to GM Finance
• Any other tasks/projects assigned by immediate supervisor

Requirements

• Bachelor’s degree in Finance or Accounting is required
• 3 years relevant treasury working experience particularly in cash management and hedging management
• Prior experience in FX trades
• Analytical and meticulous
• Possess good communication and interpersonal skills
• Possess good quantitative skills, have financial modelling and advanced working knowledge in MS Excel
• Driven, independent individual who adapts well in a fast-paced environment
• Strong knowledge in investment portfolio strategy, banking, and financial instruments

Shortlisted candidates to bring along completed job application form, resume and academic certificates to interview

Responsibilities:

• Provide overall administrative support to ensure smooth running of Admin & HR Department
• Work closely with Project Team and provide HR & administrative support for Manpower allocation, worker accommodation arrangement, and etc.
• Handle all insurance policies and claims matters eg. Group H & S Insurances, Workmen Compensation Insurance and WICA claims
• Handle on-boarding and off-boarding process
• Plan, organize and oversee the execution of training programs.
• Update and maintain the list of Company’s Track Records for BCA renewal submission
• Keeping up with updates or revisions in ISO standards and handle ISO Certification auditing
• Maintain an up-to-date record of all company vehicles.
• Manage COE renewals, road tax payments, and insurance policies.
• Coordinate Company events on special occasions.
• Other ad-hoc duties as assigned by HR & Admin Manager

Requirements:

• Degree / Diploma in Human Resource, Business Administration or related discipline
• 2-3 years working experiences
• Good knowledge of Microsoft Excel, Words
• Willing to learn, meticulous and able to work under pressure

• Allocate work to contractors and subcontractors to facilitate the smooth workflow process.
• Assess the degree of hazards and risks to ensure workplace safety is maintained.
• Communicate with the management, contractors and sub-contractors on the adjustments to cost estimates.
• Conduct the negotiations during the course of the project in order to ensure issues are resolved.
• Control project scope to meet project objectives in order to enhance project deliverables and key work activities.
• Develop cost reduction strategies to enhance the overall value of the project.
• Monitor project costs to ensure the objectives of the project are achieved in accordance to building contract law.
• Oversee and ensure compliance with standards.
• Prepare tender and contract documents in accordance to the building and construction regulations.
• Prepare the cost analysis for the project in order to ensure the overall value is enhanced.
• Provide advice on contractual claims so that the project scope is managed.

• Design & model 3D skid system, skid structure, piping GA and other not mentioned shop drawing (cutting plan) for fabrication purpose.
• Maintain proper record for drawings and information.
• Proficient in operating CAD drawings software and drawing construction detailed design.
• Create drawings and models from written and verbal specifications obtained from Engineer.
• Reviewing and checking sketches and drawings for errors before being sent to productions, vendors, engineers, etc.
• Review drawings for completeness and accuracy.
• Systematically saving sketches and drawings on CAD library, keeping the server organized; updating files as jobs progress and revisions are made.
• Continually create, edit, and update standard details for use in projects.
• Complete task assigned by superior and performing other relevant duties when needed.

About this role:

This is a key role in C-level team within the company, directly responsible for leading the overall operations and development of the organization. The role aims to rebuild and optimize the company’s production, operational, and talent systems, driving high-quality growth and sustainable development.

Key Responsibilities:

· Strategic Leadership: Drive the development and execution of the company’s strategic plans, ensuring alignment with its vision, goals, and long-term growth.

· Operational Excellence: Streamline production and operational systems to enhance efficiency, maintain quality, and support scalability.

· Business Innovation: Strengthen the operational framework by fostering innovation in business models to enhance market competitiveness.

· Talent Development: Build a high-performing team through robust talent acquisition, training, and incentive programs.

· Industry Leadership: Lead advancements in the BIM (Building Information Modeling) sector by driving technology adoption and delivering actionable solutions.

· Digital Transformation: Oversee the development and implementation of cutting-edge engineering digitalization strategies.

· Partnership Growth: Cultivate and expand strategic partnerships to increase market share and strengthen brand influence.

· Global Collaboration: Ensure effective cross-cultural communication and collaboration with international clients and partners to drive project success.

Qualifications:

· Core Competencies: Exceptional leadership, strategic thinking, execution capabilities, and resilience under pressure.

· Industry Experience: A minimum of 8 years of experience in executive search, extensive experience in the engineering and construction industry. Experience in leading or participating in successful engineering digitalization projects and BIM technology implementations is a must.

· Management Experience: Proven track record in senior management roles within medium to large enterprises, with the ability to build operation systems and lead teams effectively.

· Technical Expertise: Keen insight into trends in engineering digitalization technologies, with the ability to integrate advanced technologies into the company’s operations.

· Familiarity with international standards and regulations related to engineering digitalization technologies is an advantage.

· Educational Background: Master’s degree or above, preferably in Engineering, Civil Engineering, Information Technology, or related fields.

· Well versed in English and Mandarin, for internal communication with other stakeholders in China.

Job Description & Requirements

• Assist the project manager in planning the project
• Assist the project manager in creating schedule for the construction project
• Supervise construction projects to make sure they meet technical specifications
• Ensure that construction projects are completed within planned cost and time
• Keep accurate records of material and labor costs incurred in the construction process
• Monitor the progress of the construction work and performance of subcontractors at the site
• Hold meetings with site workers and subcontractors on behalf of the project manager
• Convey information about the progress of the project and performance of the contractors to the manager
• Assist the project manager in the procurement of certain materials
• Assist the project manager in hiring and assigning tasks to laborers
• Assist contractors and Engineers in interpreting technical designs
• Educate site workers on safety procedures to be adopted at the site and make sure that they adhere strictly to safety standards
• Report accidents that occur at the construction site to the project manager
• Administer or make sure that first aid is administered to any injured construction worker
• Ensure the smooth day to day operation of work activities at the construction site
• Maintain good relationship with site workers, contractors, and suppliers
• Ensure that any change in project plan is executed by contractors
• Motivate all the participants in the project
• Ensure that the project is executed in compliance with local or state regulations
• Identify any potential problem at the site and work to prevent it.

2. SKILLS

Leadership

Quality Control

Architectural

Drawing

Electrical

Interpreting

Procurement

Compliance

First Aid

Construction Drawings

Team Player

Civil Engineering

Scheduling

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Responsibilities

• Analyse data on Environment, Health and Safety (EHS) performance, processes and practices.
• Drive, coordinate and implement day-to-day EHS initiatives
• Maintain and improve EHS standards and practices at the workplace.
• Prepare EHS reports on regular basis.
• Promote EHS activities, organise committee meetings and conduct regular training to stakeholders.
• Conduct Safety Inspections, EHS audits and where required, undertake incident investigations.
• Ensure operations compliance with EHS legislations and requirements including subcontractors.
• Maintain EHS Management System documentation.
• Perform statutory roles of Registered WSH Officer

Requirements

• Must be a Workplace Safety & Health Officer registered with Ministry Of Manpower (Singapore).
• Experience and good knowledge of Environment, Workplace Safety & Health Management Systems such as ISO14001 and ISO45001 including and BizSAFE Certification.
• Minimum 2 years’ experience as WSHO in Singapore.
• A team player and have the ambition to excel in EHS discipline.
• Good written and communication skills.
• Possesses initiatives and creativity to drive process improvements.

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

The Engineering Manager will lead and manage a multi-disciplinary engineering team to provide high quality design and engineering knowledge and effective project management skills to support the ongoing project activities, and to provide the complete analysis and design tasks as assigned the company Management. Planning and conducting engineering projects of a complex nature in order to meet client requirements. Leading and supporting winning of new work, developing client relationships and enhancing Surbana Jurong and SMEC’s market brand.

The incumbent will role model Surbana Jurong and SMEC values, ethics and code of conduct and ensure all business activities are carried out in accordance with these guiding principles.

Key roles and responsibilities:

• Leading and managing multi-disciplinary engineering teams that are responsible for Energy & Power projects design and/or design review;
• Ensure project delivery with highest quality and on time, in accordance with established policies, procedures, systems, specifications requirements and applicable codes & standards.
• Drive the execution of engineering projects from conception to delivery, overseeing the development process, setting clear goals, and ensuring milestones are met on time and within budget.
• Responsible for the development, approval and implementation of the Engineering Project Execution Plan (PEP), follow through the project execution until completion and close out.
• Review and approve engineering designs, drawings, specifications, construction plan etc., to ensure compliance with project requirements, regulatory requirements and prudent utility best practices.
• Manage engineering-related risks and issues proactively, implementing mitigation strategies as necessary to avoid or minimize project delays and cost overruns.
• Identify, track and manage all changes in the Engineering Scope of Work, schedule and execution methodology on the project, and ensure that all changes are promptly captured through the Change Management process. Communicate any contractual scopes changes to the Management and project team accordingly.
• Ensuring that engineering teams are adequately resourced, developed and equipped to meet business needs. Overseeing planning and control process in the engineering teams, conducting regular reviews to ensure that the teams are delivering work according to the customer and company requirements.
• Supporting business development and proposal preparation works as necessary.
• To undertake other assignment from the Management from time to time.
• Workplace Health & Safety: Ensures good health is maintained through safe work practices.
• Foster a culture of innovation and continuous improvement within the engineering team, encouraging the adoption of best practices and emerging technologies.
• Stay abreast of industry trends, regulations, and best practices in engineering and construction, applying knowledge to enhance project delivery processes.

Qualifications and Requirements:

• Engineering degree from reputable university, Master degree holder will have added advantage.
• At least 20 years post graduate working experience in power generation industry with proven track record at least with power plant design, construction and consultancy works.
• Experience as Engineering Manager with GT/CCGT/thermal power plant design is a must. Candidate with other renewable energy (solar, wind, biogas, biomass, WTE etc) project experience will have added advantage.
• Competent in power plant detailed engineering and design work procedures and processes, with strong technical knowledge and expertise in power plant engineering and operation principles, standards and practices.
• Proven track record of mentoring and supervising technical staff, with strong engineering fundamentals, technical and project management skills.
• Familiar with the role of EPC engineering design, Owner’s Engineer (OE), Project Management Consultant (PMC) and other technical advisory and consultancy works.
• Conversant in API, IP, NEC, IEEE, IEC, NFPA NEMA,ASME and ANSI codes & standards.
• Registered Professional Engineer with Practicing Certificate (PEPC) with Board of Engineers Malaysia is preferred, or other professional engineering regulatory body.
• Good spoken and written English.
• Excellent interpersonal skills to work effectively within a diverse and multi-disciplinary environment, with the ability to effectively lead and motivate a multidisciplinary engineering team.
• Excellent problem-solving and analytical skills, with the ability to work effectively at all levels within the organization.
• Willing to travel or to be based at outstation or at project site (local or overseas) as requ

1. Answering incoming calls, daily checking emails, and retrieving mail from the letter box.

2. Processing of documents (quotations, delivery orders, invoices, purchase orders)

3. Provide administrative support to Project Managers and Engineers.

4. Proper filing and photocopying of documents and admin duties.

5. Order and purchase of office stationeries and equipment maintenance.

6. Any other duties as assigned by the Management.

7.Training will be provided for new entry and interns

Job Description:

• Greet clients and visitors with a positive, helpful attitude.

• Meeting room booking & preparing meeting and training rooms.

• Answering phones in a professional manner, and routing calls as necessary.

• Sorting and distributing mail.

• Provide excellent customer service.

• Run all day-to-day office administrative function at site office.

• Ordering for pantry items and handling office maintenance.

• Assisting on claim submission to finance department.

• Performing ad-hoc administrative duties.

Requirements:

• Associate’s or Diploma in a related field.

• Consistent, professional dress, and manner.

• Excellent bilingual written and verbal communication skills.

• Competency in Microsoft applications including Word, Excel, and Outlook.

• Experience with administrative and clerical procedures.

Job Responsibilities:

• Plan and monitor architectural works from design to construction stage of design & build projects.

• Collaborate with Structural and M&E teams to provide technical directions on design and detail development. Review the architectural design from consultants and subcontractors based on contractual and project specification requirement.

• Prepare, review and monitor architectural works schedule based on the project master program. Regularly provide updates through coordination meetings.

• Attend regular technical meetings related to architectural works through design stage and construction stage.

• Oversee the overall planning of architectural works, site inspections, monitoring of progress of work, variation order and certification of work done for all assigned projects.

• Oversee the monitoring of site to ensure that all architectural works of the project team and subcontractors are in compliance to the defined standards and drawings. Provide technical supports to construction & operation teams

• Review documented technical requirements and project plan to ensure adherence to defined standards

• Support interactions with Client/SO/Government agencies, consultants, subcontractors and project team to ensure smooth delivery of work including resolution of design and construction issues

• Report to Design Manager/ Construction Manager on following up materials, shop drawing preparing from our consultants and subcontractors.

• Provide review and submissions to clients.

• Provide input to the Project Management Team on all architectural related matters

Job Requirements:

• Degree in Architectural Engineering or its equivalent.

• Minimum 5 years of experience after tertiary education in relevant architectural field in the construction supervision of architectural works for projects of similar scale and complexity in local context.

• This role is to ensure all architectural works are carried out as per approved architectural drawings and specifications and all interface details with SWCs works are carried out as per CCSM and Reflected Ceiling Plans.

• Experience with LTA Project is preferable

Responsibilities

1. Compile billing document submit for invoicing
2. Liaise with procurement & supplier for job document (DN, PO).
3. Compile & scan related Job document to system for future reference
4. Liaise with procurement to request quotation from supplier (Raise PR), Perform Good Receive (GRN), Return of Material (ROM)
5. Create Notification, update RFQ, PO received in system.
6. Coordinate with vendor for department facilities maintenance
7. To support all operations administration requirement and any other adhoc assignment.

Responsibilities:

• Oversee the day‐to‐day operations of the machinery service and maintenance service, ensuring efficient workflow and timely completion of repairs.
• Manage a team of skilled technicians, providing guidance, training, and performance feedback.
• Develop and implement preventive maintenance programs to maximize company asset uptime and minimize downtime.
• Schedule and dispatch technicians to customer sites or internal workshops.
• Maintain accurate records of service and maintenance activities, including work orders, parts usage, and labor costs.
• Ensure compliance with safety regulations and industry best practices.
• Contribute to the development and implementation of operational strategies to improve efficiency and profitability.
• Creating development plans and forecasting sales targets and growth projections.
• Identifying leads and market opportunities through meetings, networking, and other channels.

Qualifications:

• Proven experience as an Operations Manager or similar role in the process equipment industry.
• Strong understanding of process machinery, including hydraulics, electrical systems, and diesel engines.
• Excellent leadership and team management skills.
• Strong analytical and problem‐solving abilities.
• Proficient in using Microsoft Office Suite.
• Excellent communication and interpersonal skills.

Key Responsibilities

Administrative Operations:

• Manage office operations, vendor coordination, and procurement processes.
• Handle vendor management systems such as Ariba and GeBIZ, ensuring efficient and compliant operations.
• Develop and implement policies and procedures for improved operational efficiency.

HR Operations:

• Oversee HR functions including recruitment, onboarding, payroll, employee relations, and compliance with Singapore labor laws.
• Create and manage employee-related documentation, including employment contracts, performance appraisals, and termination letters, ensuring compliance with local laws.
• Foster a positive work environment by leading and mentoring the HR and administrative teams.

Finance & Compliance:

• Prepare and manage income tax and GST documentation in compliance with Singapore’s regulatory framework.
• Ensure accurate and timely submission of statutory documents such as CPF contributions, IRAS filings, and MOM-related requirements.
• Provide support in financial audits and maintain accurate records for compliance.

Vendor Management:

• Manage vendor relationships through platforms like Ariba and GeBIZ.
• Ensure timely procurement, payment processing, and compliance with procurement policies.

Requirements

• Education: Master’s Degree in Management or a related discipline.
• Experience: 4–5 years of relevant experience in the construction sector in Singapore.
• Knowledge:Strong understanding of Singapore company laws, employment laws, and financial regulations.
  Experience in vendor management systems like Ariba and GeBIZ.
  Familiarity with income tax and GST documentation in Singapore.
  
• Skills:Excellent communication, organizational, and leadership skills.
  Proficiency in Microsoft Office Suite and HRIS systems.
  Ability to handle multiple priorities in a dynamic environment.
  

We are locally own company since Year 2003. We are located at Tuas View Place. Currently, we are operating 2 shifts with 5.5 working days per week with OT. We mainly using Makino Wire Cut Machines and Mazak CNC Lathe.

We have vacancy for EDM Wirecut programmer cum machinist. Prefer with cadcam knowledge and experience.

We specialist in manufacturing of aerospace parts , oil & gas , stamping, semiconductor parts.

- Must have knowledge of using measuring equipment, Vernier Caliper, Micrometer, Height Gauge

- Must be able to understand Technical Drawing

- Must be able to liaise with Customers

- Must quality check all finished parts before sending to customers

- Generate QC Reports to customers

- Must be able to use Microsoft Excel / Words / Email Anyone with the equivalent knowledge will be consider Salary will commence base on experience.

Develop a marketing strategy in accordance with the overall company goals and vision

· Understanding Company Products and doing Market Research to identify specific target groups and implement niche marketing strategies

· Grow the social media community

· Implement and manage a multi-channel marketing strategy

· Grow online marketing partners (digital publications or influencers)

· Copywriting and copy editing - Both internal and external marketing materials

· Create and execute highly engaging, Skills and experience in creative content writing

· Cross-platform social media & marketing campaigns (design, call to action and content)

· Manage content - copywriting & design. Handle content schedule and posting of content

· Experience in attaining PR coverage both online and offline

· Simple research work

· Assisting with ad hoc duties as required

Requirements:

· Social media analytics and ads experience is preferred. Social media management and community managers preferred.

· Exceptional communication skills, both written and verbal. Strong written English is a MUST

· Ability to multitask and meet tight deadlines

• Posting of recruitment advertisements
• Engagement with both internal and external stakeholders such as employees and vendors, etc
• Manage office sundry purchases
• Payroll administration
• Assists in employment contract renewals
• Coordinate medical arrangement for foreign employees (medical check-ups for work pass, and vaccination)
• Ensure complete, up-to-date, accurate and accessible records are kept for all employees.
• Assists in the co-ordination of social and recreational activities to promote the general welfare of all employees
• Performs HR data entry relating to employee's information, training records, etc.
• Manage and route phone calls appropriately
• Assists in work pass applications and other immigration related work.
• Prepare and submit government bodies and statutory board related surveys.