Job Scope

1) To handle operation of maintenance of M&E systems.

2) To coordinate with internal and external clients on renovation and reinstatement of tenant offices.

3) Need to read M&E drawings.

4) To manage technicians.

5) To ensure all operational works are carry out in an efficient way.

6) Able to communicate properly to all parties involved in the projects.

7) Ability to solve problems by providing sound solutions.

Requirements

1) Diploma or Degree in Engineering (Mechanical, Electrical)

2) Specialist Diploma in Construction Productivity by BCA will be an added advantage

3) Minimum 3 years of working experience

4) Proficient in Microsoft Office

5) Auto-cad knowledge will be an added advantage

Main duties:

- Service engineer is assigned to perform tests, maintenance, repair, inspections, fault-finding and troubleshooting of installed components of marine EGCS (exhaust gas cleaning systems).

Additional tasks:

- Service Engineer (when / if needed) may be assigned to support internal and external stakeholders by providing technical support and solutions and taking ownership of assigned support cases.

- Service Engineer (when / if needed) may be assigned after-hours on a rotating basis to assist customers with emergency cases (24/7 remote support).

Location:

- Manta Marine Service hub in Singapore as base, onboard of ships, at ports, anchorage and shipyards

- Other locations which may be needed occasionally.

Essential responsibilities and relevant key words:

- Perform preventive maintenance, repair, monitoring, inspections, tests, calibration, fault-finding, troubleshooting

- Perform basic software tasks in relation to attendances, such as uploading, downloading and fine-tuning the software

- Prepare required documents for completion of service trips and ensure that the documents are received by Office.

- Assist internal with evaluating and investigating incoming claims and developing scope of work prior to service or warranty repair attendances.

- Assist other Manta Marine engineers during installation, commissioning, and service missions.

- If assigned, hold training sessions for customer/crew members during service-related trips onboard the vessel to ensure that crew members maintain and operate the Manta systems/equipment properly.

- If assigned, perform Factory Acceptance Testing (FAT)

- Submit product improvement proposals to the concerned department and Service Manager in existing and future hardware or software to prevent the reoccurrence of a problem (failures, defects, anomalies, and malfunctions).

Maintain compliance with all company policies and procedures:

- Ensures that all activities, both supervisory and administrative tasks, at site agree with the governing laws, rules, standards, and existing policies of the company and at the field.

- Participate in all safety and security training that Manta provides.

- Develop and retain good customer relationship on field

- Convey feedback of customers from on-site and/or off-site activities to the Service Manager to address the situation for future, development and improvement.

- Perform other related duties as assigned by the manager.

Minimum Education and/or Work Experience Requirements:

Hard Skills:

- BSc degree or minimum 5 years relevant work experience in the shipping/marine/maritime industry

- Knowledge of proper safety procedures on board and recognition of hazards at sites (marine safety).

- Solid skills in marine electric, having experience and a good understanding of PLCs, network and communication between components.

- Sufficient computer proficiency in:

· MS Office 365 (Word, Excel, PowerPoint, Outlook, etc.).

· MS Dynamics (Case Management System).

- Driver’s license (vehicles)

Soft Skills:

- Excellent verbal and written communication skills in English, including the ability to effectively communicate with internal and external customers.

- Be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service. Be flexible whenever necessary.

- Ability to work in teams and independently, and carry out assignments to completion within parameters of given instructions, prescribed routines, and standard accepted practices

- being structured, handy, and can plan and organize the execution of service work.

- With short notice can travel abroad and leave your home for service trips.

Advantages:

- Knowledge and experience with SOx/NOx, function of components and whole system, including:

· PLC program changes/re-programming.

· VFD commissioning/re-programming.

· Setup of network communication systems. Configuration of switches, I/O, PLC, etc.

- First aid certificate

TikTok will be prioritizing applicants who have a current right to work in Singapore, and do not require TikTok's sponsorship of a visa.

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team

The team use the most advanced AI technology to combat various risks/violations in TikTok's e-commerce platform, maintain platform security, build a good e-commerce ecosystem, and empower business teams to improve work efficiency. We pursue the ultimate risk detection capability. The fairness and sustainability of the e-commerce ecosystem, high-quality content and merchandise are areas where we are constantly striving for improvement.

We are looking for talented individuals to join us in 2025. As a graduate, you will get unparalleled opportunities for you to kickstart your career, pursue bold ideas and explore limitless growth opportunities. Co-create a future driven by your inspiration with TikTok.

Candidates can apply to a maximum of two positions and will be considered for jobs in the order you apply. The application limit is applicable to TikTok and its affiliates' jobs globally. Applications will be reviewed on a rolling basis - we encourage you to apply early.

Responsibilities

- Responsible for identifying algorithms for risk/violation/low-quality issues in e-commerce scenarios such as products, shopping cart short videos, and live streaming with products.

- Responsible for mining and identifying algorithms to detect fraudulent behaviors and identify risky, violated, or low-quality merchants and creators.

- Responsible for optimizing algorithms for large-scale brand libraries, products, and content deduplication/clustering.

- Responsible for data construction, instruction fine-tuning, CoT, alignment, and other work for large models in the e-commerce domain, aiming for ultimate effect optimization in the e-commerce domain.

- Responsible for exploring reinforcement learning and operational research algorithms in intelligent dispatching and intelligent audit scheduling to improve audit quality and efficiency.

Qualifications

Minimum Qualifications

- Final year Ph.D or recent Ph.D graduates in Computer Science, engineering or quantitative field.

- Solid foundation in data structures/algorithms, proficient in machine learning/deep learning theory, and rich practical experience.

- Familiar with 1-2 areas in natural language processing, computer vision, multimodal, graph algorithms, search algorithms, text/data mining, and LLM.

- Excellent analytical and problem-solving skills, passionate about challenging problems.

- Good team spirit and strong communication skills.

Preferred Qualifications

- Good sense of teamwork and communication skills, practical experience in relevant business scenarios is preferred.

- Published papers in high-level computer science conferences (ACL, EMNLP, NIPS, AAAI, etc.) or have competition experience are preferred.

- Candidates who have practical experience in DALL-E, CLIP, GLIDE and other related projects are preferred.

- Candidates who have good performance in international competitions in related fields ( such as VQA, Image Captioning/Retrieval) are preferred.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

By submitting an application for this role, you accept and agree to our global applicant privacy policy, which may be accessed here: https://careers.tiktok.com/legal/privacy.

If you have any questions, please reach out to us at [email protected].

Main Duties:

● Assist Project Manager in the preparation of project Capex, budget estimation and cost allocation. Assist in monitoring the budget tracking and report to Project Manager.

● Preparation of procurement plans, schedule and tracking of project procurement progress.

● Assist in Preparation of technical specification, bill of materials, RFQ for purchase of equipment, components or services required for the project.

● Coordination with procurement regarding supply and vendor issues. May work with vendors on behalf of procurement.

● Assist in Preparation technical compilation and evaluation of vendors quotation.

● Preparation of documents required by the purchasing department to issue PO or matters related to purchasing and Facilitate the purchase order until PO issuance from the purchasing department.

● Prepare and monitor the procure items tracking and ensure getting periodic

updates/reports and on time delivery.

● Tracking of vendors / contractors claims, ensures that the claim quantity is accurate as per contract or PO.

● Tracking of Variation Orders (VO’s) and Coordinate with the procurement team regarding the change order.

● Lead the procurement meetings with vendors if needed.

● Prepares weekly or monthly procurement status reports by collecting, analyzing, and summarizing information and trends; recommending actions.

● Maintains product and company reputation by complying with state and company policy and regulations.

● Contributes to project team effort by accomplishing related results as needed.

● Able to work independently/ with minimum supervision.

● Willing to work late or during weekends when required.

Required Experience:

● Minimum of 2 yrs experience working in Semiconductor industries.

● Experience working at equipment and components procurement, coordination with vendors/suppliers OEM related to procurement or equivalent experience.

● With experience in giving inputs in purchasing technical specifications for equipment or components and good understanding of the tendering process and contract.

Required Skills:

● Proficiency in technical writings and good presentation skills.

● Proficient to read and understand engineering plan drawings and come up with procurement specifications Bill of material or Technical Specifications.

● Proficient with Google Workspace Platform (Google Sheet,Docs,Slides) application or equivalent.

● Familiar with Singapore and international codes /Regulations related piping, construction.

Qualifications:

● Minimum Graduate of Bachelor's degree in Mechanical, Civil, chemical or equivalent engineering education.

● Willing to work at various outdoor construction sites.

● Well versed in autocad drawings to draw P&ID and SLD. Able to understand the P&ID and draw as per process requirements.

PERFORMANCE GOALS

● Ontime project completion of given Scope of Works

● Deliver high quality output such as technical specifications or bill of materials.

● Contributes to project cost saving and efficiency.

● Contributes to safety to meet Zero (0) Major incidents and time lost.

Clarissa Loh Yu-Shen R1104558

Recruit Express Services Pte Ltd 13C6614

Job Description

1. Establish action plan for all sales promotions
2. Drive sales growth through maximization of resources and execution of market segment strategies
3. Secure active customer relation data management within the assigned area
4. Establish / Maintain campaign results report to track progress and impact of marketing initatives and take appropriate actions in case of deviation
5. Achieve sales target set by management in assigned area
6. Assist ASM in supporting channel partners technically
7. Provide market and competitor intelligence on monthly base
8. Monitor customer, competitor activity and gather general market information and feedback to headquarter.
9. Create and maintain strong customer relationship with top notch customer service.

Requirements

• Diploma/Degree in Mechanical / Electronics Engineering
• Minimum 5 years of sales experience in multi-national industrial environment, preferably with wire processing machines, and more than 3 years in sales management
• Good basic understanding in industrial machinery, automation and software
• Excellent communication, presentation, and negotiation skills
• Ability to work independently and as part of a team
• Willingness to travel overseas and visit clients (up to 30% of time)
• Singaporeansa and PR only

Job Description:

The Sales Executive will promote the Company’s assets for rental and sales and will be accountable for the entire sales process. He/She will need to visit clients (new and old) and their project sites or new sites to canvass for business and successfully secure the order. He/She will also need to liaise with the Operations team to ensure smooth delivery of the assets to the client site. He/She will also need to follow up with their clients to ensure that invoices are paid and monies collected within a reasonable time frame.

He/She will report directly to the Sales Manager (if applicable), or directly to Managing Director and General Manager and will regularly update them on sales pipeline, discussion progress and implements activities to achieve the targets set by the Company.

Job Requirements

• Must be self driven and have an entrepreneurial mindset
• Prefer those with sales background
• Those with prior heavy machinery or construction equipment sales or rental experience will have an added advantage.
• Possess a valid and minimum Class 3 driving license
• Good communications and soft people skills
• Be able to submit daily updates, and weekly reports to management

Responsibilities:

• Assist the Project Manager in project planning and to co-ordinate and oversee all works on the site
• Monitor & co-ordinate the works with supervisors
• Handling of technical and engineering problems
• Assist in planning, programming and monitoring of construction works progress
• Liaison with client's representative, relevant authorities and consultants
• Identify and assess any foreseeable risk arising from the workplace or work processes, minimise environmental impact associated with the construction activities
• Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace
• Ensure safe work procedures and environmental control measures are implemented at the work site

Requirements:

• Diploma/Degree in Civil Engineering
• Able to operate MS Project
• Proactive with excellent interpersonal skills and analytical abilities

Mon-Fri, 8.30am-6pm. Available for occasional night/weekend/PH project as required

Office location: Outram

Responsibilities

• Lead and direct projects and ensure they are directed towards a common objective
• Engage and communicate with stakeholders to deliver project milestones and comply with strict deadlines
• Ensure client satisfaction and manage escalations, acting as single point of contact to the client
• Ensure that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Ensure proper documentation is in order
• Any other duties as assigned

Requirements

• Preferably with 2 years’ relevant work experience, or entry level candidates in relevant field of study
• Good communicator with excellent coordination skills
• Ultra-sensitive to deadlines and capable of good resource planning
• Basic technical knowledge on ELV, Automation, Networking and Security Systems (CCTV, Card Access, Alarm System) will be an advantage
• Committed individual with great initiative and strong problem-solving skills
• Candidates from the same industry will be highly preferred
• This job is suitable for older workers

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Roles & Responsibilities:

- Responsible for the design, development and commissioning support of

Pharmaceuticals DCS / PLC systems on site. Key technology will be Siemens. Any

exposure to Rockwell and Emerson DeltaV will be of advantage.

- Will participate in the development and implementation of Automation solutions in

line with S88 standards for the plant.

- Thorough understanding of Physical and Procedural Layer design, development and

qualification.

- Work with automation team to design system architecture, Design Specification,

Control Strategies, and library development.

- Strong understanding of CSV documentation for Pharma projects

- Supporting manufacturing operations for day today support for DeltaV system.

- Support on NC and CAPA and identification of root causes

- Continuous improvement of the system and support for Operations as required.

- Field commissioning of automation equipment’s.

- System administration and maintenance support.

- Computer system Validation and documentation support for automation systems.

- Interacting with Operations Team, Process Team, Equipment Vendors and Technology

providers.

Requirements:

· Minimum of 8-10 years’ experience in a similar role, ideally in the

Pharmaceutical industry.

· Experience in the Designing and commissioning of automation projects for

GMP manufacturing site.

· Through understanding of Batch S88 standards (CM, EM, Phases, Recipes,

Units etc)

· Understanding of Pharmaceutical or Biopharmaceutical process

· Understanding of automation hardware and networking technologies

· Siemens PCS7 or S7 with Batch exposure is required.

· Emerson DeltaV DCS Batch experience or Rockwell Pharma experience is

advantage

· Familiarity with SDLC and quality management processes in the pharma

· Ability to work well in a team environment.

· Able to manage multiple party coordination for automation information.

· Good communication and able to work remotely or onsite as required by

client.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Roles And Responsibilities:
Infrastructure Management:
• Deploy, configure, and manage cloud resources using infrastructure-as-code (IaC) tools such as
Terraform or CloudFormation
• Monitor and maintain cloud infrastructure to ensure optimal performance, availability, and
security.
• Implement automation and orchestration to streamline deployment and scaling processes.
Cloud Services Administration:
• Manage and administer various cloud services, including compute instances, storage solutions,
databases, networking components, and serverless offerings hosted on AWS and Azure.
• Optimize resource utilizations to ensure efficient cloud service delivery and cost management.
Monitoring and Incident Response:
• Set up monitoring and alerting mechanisms to promptly identify and address performance issues
and security vulnerabilities.
• Collaborate with the incident response team to troubleshoot and resolve operational incidents,
ensuring minimal service disruption.
Security and Compliance:
• Implement security best practices to protect cloud environments from potential threats and
vulnerabilities.
• Assist in conducting security audits and assessments to maintain compliance with industry
regulations and standards.
Collaboration and Documentation:
• Collaborate with cross-functional teams, including DevOps, development, and security, to
understand requirements and align cloud infrastructure accordingly.
• Maintain comprehensive documentation related to cloud infrastructure, processes, and
procedures.
Continuous Improvement:
• Stay up to date with industry trends and advancements in cloud technologies.
• Identify opportunities for automation, optimization, and process improvement to enhance cloud
operations.

Requirements / Qualifications
• Bachelor’s degree in computer science, Information Technology, or a related field (or equivalent
experience).
• Atleast 5 years of working experience in cloud operations, managing cloud-based infrastructure, and
deploying cloud services.
• Proficiency in cloud platforms such as Amazon Web Services (AWS) and/or Microsoft Azure.
• Strong understanding of infrastructure-as-code principles and tools.
• Familiarity with scripting and automation using languages like Python, PowerShell, Bash, etc.
• Experience with monitoring and log aggregation tools for proactive issue detection.
• Knowledge of security best practices and experience implementing security controls in cloud
environments.
• Excellent problem-solving skills and the ability to troubleshoot complex technical issues.
• Strong communication and collaboration skills to work effectively with diverse teams.
• Certification in AWS Cloud Practitioner, AWS Architect is a plus.
Scripting (good to have)
• Python and associated libraries (pandas, pyspark)
• R
• Frameworks – React/FLASK

Requirement

• At least 2 year’s of relevant experience
• Skills on DevOps, CI/CD, Jenkins

Responsibilities

• Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.
• Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.
• Develop, maintain and administer tools which will automate operational activities and improve engineering productivity
• Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.
• Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.

Interested applicants, Please send your updated resume in Word format to [email protected]

Please indicate Job Code 109 on email subject

We regret that only shortlisted candidates will be notified.

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1104129

Please visit www.itcspl.com to learn more information about ITC

Job Description:

• Assist the Steel Structure Project Manager in project planning, co-ordinate, execute and monitor all works on site.
• Responsible for daily site operation, monitor and co-ordinate works with supervisors.
• Supervise the team and ensure high standard of safety practices are carried out at all times.
• Plan on daily project activities and monitor progress to ensure civil and structural activities meet project specifications and project schedule.
• Undertake design and construction issues concerning all works, provide engineering inputs, resolving technical problems and ensuring quality of projects.
• Liaise with all parties involved in the project including Main contractor, relevant authorities, consultants, sub-contractors and suppliers.
• Co-ordinate with Procurement on delivery items and schedule.
• Ensure all project documentations (method of statement, work progress reports, daily reports, QA/QC report etc.) are submitted in a timely manner.
• Any other adhoc duties assigned by the Steel Structure Project Manager.

Job Requirements:

• Diploma or Bachelor Degree in Civil Engineering or equivalent.
• Min. 5 years of relevant work experiences in construction industry.
• Ability to work independently, multi-task and have good communication skills.
• Willing to work at project sites.
• Competency in Microsoft applications including Words, Excel and Outlook.
• With relevant WSQ certification will have added advantage.

Working Hours:

Monday to Friday: 8am to 5.30pm, Saturday: 8am to 12pm (Entitle to 1 Sat Off per month, subject to monthly work schedule)

Responsibilities:

• Provides safety engineering guidance and support to other disciplines, ensuring assurance of technical safety aspects in design.
• Ensures major hazards are identified, adequately assessed, evaluated, and managed in accordance with relevant statutory, client and project specific requirements.
• Identifies safety engineering elements are not fully integrated into the design and propose solutions to rectify the situation.
• Identifies change in regulatory requirements and advise relevant departments of requirements to comply.
• Develop specifications, terms of reference and scopes of work for specific safety engineering studies.
• Gather necessary information and provide inputs to safety studies.
• Develop or supports safety philosophies: Passive Fire Protection, Escape Evacuation and Rescue, ESD,
• Knowledge of Fire & Gas Detection, Fire Fighting Develop or support functional safety management: FSMP, SRS
• Supports the development of ESD and F&G Cause & Effect design.
• Leads hazardous area classification studies, Writes procedures, specifications, and material.

Requirements:

• Degree in Chemical/Petroleum Engineering with relevant experience in Process/Technical Safety
• Engineering degree with a Master's or Diploma in Process Safety and Risk Engineering, and experience in Technical Safety will be strongly considered.
• 3 years of relevant working experience
• Possess positive and willing to learn attitude.
• Able to multi-task and able to work in a fast-paced environment.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

SMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Thin Film department diverse team of talent. You will be responsible for supporting Thin Film Equipment startup, maintenance and related activities to support daily production and achieve operation targets.

What you will be working on:

• Support CVD/PVD equipment engineering related activities to achieve operation targets and meet company objectives
• Participate in Continuous Improvement for Cost, Yield, Productivity and Uptime
• New Equipment Startup and Relocation to support Production Plan
• Tool Ownership and accountability for Uptime, Wafers scrap, Parts Management, Equipment Down Memo Reduction
• Troubleshoot and resolve Equipment issues to support daily production
• Review and optimize equipment maintenance procedures
• Consumable and spare management ensure adequate provision
• Participate in technology transfer from motherfab
• Participate in implementation of TSMC/NXP BKMs and generate SSMC BKMs
• Update of OIs and SOPs to document real and best practices
• Preventive Maintenance Planning and alignment of schedule with Manufacturing
• Conduct Training and certification for new PM crew in terms of Hands on and Theory
• Drive Manufacturing for Monitoring Time reduction to improve Uptime
• Lead/ Participate in Transform Platform and generate LSS, BKMs and Trade Secrets for value creation for the company
• Able to perform weekend 12-hour shift or Swing Shift or any shift pattern as defined by Manager

More About You:

• Bachelor in Engineering (Mechanical/Mechatronic/Electrical/Electronic)
• 1-3 years’ experience in semiconductor manufacturing environment.
• 5 years direct experience in CVD equipment for Diploma holders
• Knowledge in the following tool types AMAT Endura , Centura WxZ, Novellus Altus, Tel Scrubber, Jusung Eureka
• At least 3 years’ experience in same field will be consider for senior position
• A strong background and experience in semiconductor manufacturing

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description

• Developing CI/CD roadmap and implementing to the projects.
• Help on AGILE/SCRUM Methodologies while execution.
• Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.
• Develop, maintain and administer tools which will automate operational activities and improve engineering productivity
• Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.
• Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.
• Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.
• Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.
• Configure OSS, Sonar, Fortify through continuous integration and commit based Scan for Quality Assurance. enable the automation testing and load testing.
• Automate continuous delivery and on-demand capacity management solutions
• Developing configuration and infrastructure solutions for internal deployments
• Troubleshooting, diagnosing and fixing software issues
• Updating, tracking and resolving technical issues
• Suggesting architecture improvements, recommending process improvements
• Evaluate new technology options and vendor products. Ensuring critical system security through the use of best-in-class security solutions.

EA Number: 11C4879

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible. Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day. To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

The Business Risk Integrated Control (BRIC) team is missioned to:

- Protect ByteDance users, including and beyond content consumers, creators, advertisers;

- Secure platform health and community experience authenticity;

- Build infrastructures, platforms and technologies, as well as to collaborate with many cross-functional teams and stakeholders.

The BRIC team works to minimize the damage of inauthentic behaviors on ByteDance platforms (e.g. TikTok, CapCut, Resso, Lark), covering multiple classical and novel community and business risk areas such as account integrity, engagement authenticity, anti spam, API abuse, growth fraud, live streaming security and financial safety (ads or e-commerce), etc.

In this team you'll have a unique opportunity to have first-hand exposure to the strategy of the company in key security initiatives, especially in building scalable and robust, intelligent and privacy-safe, secure and product-friendly systems and solutions. Our challenges are not some regular day-to-day technical puzzles -- You'll be part of a team that's developing novel solutions to first-seen challenges of a non-stop evolvement of a phenomenal product eco-system. The work needs to be fast, transferrable, while still down to the ground to making quick and solid differences.

Responsibilities

- Build machine learning solutions to respond to and mitigate business risks in ByteDance products/platforms. Such risks include and are not limited to abusive accounts, fake engagements, spammy redirection, scraping, fraud, etc.

- Improve modeling infrastructures, labels, features and algorithms towards robustness, automation and generalization, reduce modeling and operational load on risk adversaries and new product/risk ramping-ups.

- Uplevel risk machine learning excellence on privacy/compliance, interpretability, risk perception and analysis.

Qualifications

- Master or above degree in computer science, statistics, or other relevant, machine-learning-heavy majors.

- Solid engineering skills. Proficiency in at least two of: Linux, Hadoop, Hive, Spark, Storm.

- Strong machine learning background. Proficiency or publications in modern machine learning theories and applications such as deep neural nets, transfer/multi-task learning, reinforcement learning, time series or graph unsupervised learning.

- Ability to think critically, objectively, rationally. Reason and communicate in result-oriented, data-driven manner. High autonomy.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Summary:

We are seeking an experienced and dedicated Senior Site Engineer to join our dynamic team in the construction industry. The Senior Site Engineer will be responsible for overseeing construction projects from inception to completion, ensuring they are completed on time, within budget, and to the highest quality standards. This role requires strong leadership skills, technical expertise, and the ability to effectively manage a team of site engineers, supervisors, and construction workers.

Key Responsibilities:

Project Management:

• Plan, schedule, and coordinate construction activities to meet project deadlines.
• Monitor project progress and adjust schedules and targets as required.
• Ensure all work is completed in accordance with specifications, codes, and standards.

Site Supervision:

• Oversee daily site operations, ensuring compliance with safety regulations and quality standards.
• Conduct regular site inspections and resolve any issues or conflicts that arise.
• Liaise with contractors, suppliers, and other stakeholders to ensure smooth project execution.

Technical Guidance:

• Provide technical support and guidance to site engineers and construction teams.
• Review and interpret construction drawings, plans, and specifications.
• Ensure accurate implementation of construction designs and plans.

Quality Control:

• Implement and monitor quality control procedures to ensure the highest standards of construction.
• Conduct regular inspections and testing of materials and workmanship.
• Address any non-conformance issues promptly and effectively.

Budget and Cost Control:

• Prepare and manage project budgets, ensuring cost-effective utilization of resources.
• Monitor and control project expenses to ensure adherence to budget constraints.
• Report on financial performance and progress to senior management.

Health and Safety:

• Promote and enforce a strong safety culture on site.
• Ensure compliance with all health and safety regulations and standards.
• Conduct regular safety audits and implement corrective actions as needed.

Communication and Coordination:

• Serve as the main point of contact for clients, consultants, and subcontractors.
• Facilitate effective communication between all project stakeholders.
• Prepare and present project reports, progress updates, and documentation.

Qualifications Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.

Experience:

• Minimum of 7-10 years of experience in the construction industry, with at least 3 years in a senior supervisory role.
• Proven track record of successfully managing large-scale construction projects.

Skills:

• Strong leadership and team management skills.
• Excellent problem-solving and decision-making abilities.
• Proficiency in project management software and tools.
• In-depth knowledge of construction methods, materials, and regulations.
• Strong communication and interpersonal skills.

Certifications:

• Professional Engineer (PE) license or equivalent certification is preferred.
• Safety management certifications (e.g., WSQ) are an advantage.

Working Conditions:

• Full-time position based on-site with occasional office work.
• Willingness to work extended hours and weekends as required to meet project deadlines.
• Ability to work in a fast-paced, high-pressure environment.

Responsibilities:

• Responsible for planning the server onto racks, arranging the server mounting
• Maintain UNIX/Linux Operating System
• Install the operating systems for new mounted servers
• Reinstall the server operation systems, solving the abnormalities.
• Perform daily server maintenance, troubleshooting, repair and follow-up break-fix of the server and other hardware
• Maintain data on internal systems including asset management, ticketing, rack related data
• Work with remote vendors or other teams to solve hardware batch failures and problems
• Oncall on duty, responsible for dealing with the problems raised by the business owner side
• Collect and check online assets status or issues
• Erase drives or other configurations for retiring or relocating servers.
• Provide retrofitting or test feedback for tools/systems/platforms.
• Submit and track the part RMA or media destruction process
• Perform server lifecycle management

Requirements:

• Bachelor's Degree or Diploma in Computer Science, Electrical engineering or any other relevant fields
• Possess comprehensive Linux skills-set
• Proficient in coding and scripting
• Knowledge of the interdependencies of server functions and technologies
• Can understand and run simple Shell/Bash scripts
• Familiar with Linux system, able to locate hardware faults;
• Basic network knowledge concepts - MAC, Subnet, TCP/IP, with ability to perform general troubleshooting
• Knowledge of out-of-band/lights-out server communication methods, such as IPMI

Technical Support Engineer / Assistant Manager – Technical

• Full time opening = Stability
• Mechanical Engineering
• industrial piping and instrumentation design/ 2D AutoCAD
  

Job Scope:

• Attend technical meetings and presentations with customers.
• Perform technical calculations (e.g., WFC, Thermowell design, thermistor) and issue certificates.
• Provide technical advice and propose solutions to meet customer needs.
• Design and prepare technical drawings using 2D AutoCAD.
• Liaise with headquarters on design changes and certification compliance (e.g., ATEX, IECEx).
• Plan work schedules and guide technical support engineers.
• Address and resolve technical issues for customers and internal teams.
• Collaborate with the sales team to understand and meet customer requirements.

Additional Skills

• Good interpersonal and communication skills
• Experienced in coordinating schedules and providing guidance
• Analytical problem-solving ability to propose alternative technical solutions that align with customer needs and company standards.

If you are interested in this opportunity, submit your application now to winnie.chen(at)manpower.com.sg find out more about this position. Thank you.

Winnie Chen EA License No.: 02C3423 Personnel Registration No.: R1980765

Job Description:

• Manage and supervise daily construction activities to ensure alignment with project plans, design, and quality standards. Report to the QP as Resident Engineer (RE) and the Project Manager.
• Coordinates and manages daily construction activities, ensuring that work aligns with project plans and technical specifications.
• Oversee on-site quality and safety, handle technical issues, and ensure compliance with project specifications.
• Manage materials and labor to keep the project on schedule and within budget.
• Plan and schedule construction operations according to the Project Management Plan.
• Coordinate with consultants on design analysis, approvals, and resolving technical issues.
• Liaise with clients on design submissions and supervise work progress.
• Conduct inspections for civil work, including excavation, structural work, and casting.
• Ensure all work meets quality standards and contractual requirements.
• Implement effective Environmental, Safety, and Health practices on-site.

Job Requirements:

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore
• Qualified & Recognized RE certificate
• Minimum 5 years’ C&S work experience with strong knowledge in construction of building structures.
• Preferably Building and Civil work experiences.
• Strong interpersonal skills and a team-oriented mindset.

Responsibilities:

• Design, implement, and maintain scalable and secure cloud infrastructure on AWS.
• Manage and deploy applications using containerization technologies, with a strong focus on Red Hat OpenShift.
• Develop and optimize CI/CD pipelines using Jenkins to ensure smooth and efficient delivery of software releases.
• Collaborate with cross-functional teams to troubleshoot and resolve infrastructure and deployment issues.
• Implement and manage Nginx configurations for load balancing, reverse proxy, and other web server-related tasks.
• Ensure the security, availability, and performance of production systems.

Profile

• Bachelor's degree in Computer Science, Engineering, or a related field, or equivalent experience.
• Minimum7 years experience as an AWS DevOps Engineer
• Proven experience as a DevOps Engineer in Singapore public sector or Financial Institution is a plus
• Hands-on experience of AWS services and infrastructure as code (IaC) principles.
• Expertise in containerization technologies, especially RedHat OpenShift and/or Kubernetes
• Proficient in scripting languages such as Python, Shell, or Bash.
• Strong knowledge of CI/CD concepts and hands-on experience with Jenkins pipelines.
• Familiarity with Nginx for web server configurations and optimizations.
• Excellent problem-solving and communication skills.
• AWS or other relevant certifications are a plus.

Responsibility

You will be part of a team in the Corporate Services Department responsible for the operation and maintenance of building facilities. (e.g. Building maintenance, audio visual (AV) and video conferencing (VC) systems, recording studio facilities, Mechanical & Electrical systems (M&E) etc). Your primary role is to carry out day-to-day operation and maintenance of AV, VC and recording studio facilities and working with various stakeholders for successful work delivery of meetings, events, webinars, recordings, video production etc.

You will also have the opportunity to assist in the planning and execution of various improvement and upgrading works on building facilities. These could involve feasibility studies, technical specifications, preparation of procurement document, work supervision, system testing and commissioning and defect rectifications.

Your responsibilities include:

•Plan, coordinate and attend to all requests to support department internal and external major meetings, webinars, events, recordings and video production. Understand user’s requirement and provide technical support accordingly.

•Plan, set up and operate the control room and studio equipment for live events or recordings.

•Collaborate closely with internal and external stakeholders to help facilitate the creation and post production of multimedia content.

•Conduct regular preventive and corrective maintenance works to ensure the systems are in good working condition, whilst keeping an up-to-date inventory for audit

•Oversee various AV contractors to ensure they deliver their services in accordance with the respective contracts and service level agreements. Manage and administer contracts and assess the contractors’ performance regularly (e.g. verification of service rendered and payment).

•Manage and assist in procurement works including but not limited to drafting of contract specifications, seeking funding approval, tender calling, tender evaluation and seeking approval for tender award.

•Assist the Team Lead in managing a team of technicians.

Job Requirements:

•Degree or Diploma in Media / Mas Communications / Audio Visual or equivalent.

•At least 5 years of relevant experience in broadcasting and live production or AV and VC operation and maintenance with supervisory responsibility.

•Proficiency in Adobe Photoshop, After Effects, Premier Pro, Creative Suite and photographic skills

•Good understanding of hardware (cameras, video switchers, lighting, sound) and software (TriCaster, OBS, vMix) needed to run professional videos and live streams.

•Experience with filming equipment and studio production, with working experience on production sets or part of a production team.

•Experience in Project Management of large-scale AV implementations will be an advantage.

•Proficient and experience with AV and VC systems (Crestron/Extron/Cisco/Bosch) will be an advantage.

•Up-to-date on new broadcasting, AV and VC technological developments.

•Independent worker and a good team player who is comfortable in working in a fast-pace and dynamic environment.

•Good writing and interpersonal skills with a customer-oriented mindset.

Job Summary:

• Salary range: Up to $9000
• Working Days and Hours: Monday - Friday (9am to 5pm)
• Location: Bugis/Taiseng/Paya Lebar
• Benefits: Performance Bonus, Hybrid work arrangement, AL

Job Responsibilities:

• Lead the technical implementation of AppDynamics solutions, translating solution architecture into actionable technical plans.
• Collaborate with the customer’s technical teams and stakeholders, understanding their environment and aligning deliverables with business objectives.
• Work with AppDynamics R&D and Customer Support to address product feedback engagement-specific support issues, and improvement opportunities.
• Provide technical mentorship and guidance to junior team members, fostering a collaborative learning environment.
• Communicate effectively with customers to gather requirements, set expectations, and propose relevant technical solutions.
  
  Requirements:
• Bachelor’s degree in Computer Science or related field required; Master’s degree preferred, or equivalent work experience.
• AppDynamics Certified Associate Administrator (ACAA)
• AppDynamics Certified Associate Performance Analyst (ACAPA)
• AppDynamics Certified Implementation Professional (ACIP)
• Preferred: ITIL, TOGAF certifications
• Hands-on programming experience

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON,

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Foo Kai Jing (Fiona)

Registration Number: R2199329

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Responsibilities:

• Oversee construction activities, progress, planning, implementation, and monitoring work schedules per the master and detailed work program
• Provide technical advice on Underground Excavation, and Tunnelling works
• Coordinate with consultants and authorities to ensure that TBM services are delivered
• Liaise with PE on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle technical and engineering problems
• Guide supervisors about construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep the site safe and neat
• Supervise ongoing site activities closely
• Experienced in grouting reinforcement, muck pit construction, circulating water pool construction, gantry crane installation, and thrust frame installation
• Supervise subcontractors

Requirements:

• Bachelor/Master’s degree in Civil, Geotechnical, and Geological Engineering
• At least 5 years of relevant experience in Tunnelling with EPB TBM, Slurry TBM
• Well-versed with LTA, PUB, and BCA standards and guidelines
• Competent with Plaxis software,2D/3D, Eurocodes, and technical tunneling/ground construction know-how. experience with open-cut excavations, shallow foundations, and tunnel design is advantageous
• Competent in planning and organizing work schedules and a demonstrated ability to deliver timelines
• Strong sense of responsibility & good leadership and interpersonal skills
• Good team player with the ability to lead & multi-tasking