We invite forward-looking and dynamic engineers qualified to degree level (degree recognised by the Professional Engineers Board (PEB) of Singapore, to join their office in Singapore as Electrical Engineers. ACEPL specializes in building services consultancy and was established in 1995 to provide Mechanical & Electrical building services for condominiums, teaching institutions, hospitals, hotels, office buildings, shopping malls, data centers, etc. For more information about ACEPL’s work, visit www.alpha.com.sg

We offer:

• Competitive salary
• Conducive working environment
• Training and guidance by experienced seniors

We enable you to achieve:

Ultimate goal to achieve a Professional Engineer qualification.

What you will do:

Design, supervision, and contract administration of the following works for institutional/ commercial/ residential/ industrial projects:

1) Electrical Installation

• Medium and Low Voltage Systems
• Fault Analysis and Protective Relay Co-ordination Studies
• Single Line Diagram Design
• Sizing of Emergency Standby Generators
• Sizing of Uninterruptible Power Supplies
• General Lighting and Power Design
• Lightning Protection Design
• Earthing Design
• Extra Low Voltage Systems
• Solar Photo Voltaic Systems

2) Vertical Transportation

• Passenger/ service/ goods lifts including traffic analysis
• Escalators and travellators

3) Preparation of system schematics and layout drawings

4) Preparation of technical specifications and drawings

5) Tender evaluation

6) Plan submissions to relevant authorities

7) Review of contractors’ technical submission and shop drawings

8) Verification of contractors’ progress claims

9) Monitoring of contractors' site progress

10) Witness factory & site acceptance tests

Purpose:
To independently define the concepts, design, prepare and deliver fire protection system deliverables for the assigned project (may include Construction, Commissioning and Offshore assignment) effectively and efficiently according to the specified technical requirements, timelines and budget, and independently deal with and resolve all issues of the project.

Responsibilities

• Understands the project specific specifications and requirements of the assigned project (mayinclude Construction, Commissioning and Offshore assignment) and Industry Standard, Classification Society and Regulatory requirements.
• Develops design philosophies, engineering specifications, PFD and P&ID drawings (for fire water pump system, fire water network, deluge system, foam system and gaseous fire fighting system), Shadow drawings of firewater & foam System, Layout of fire protection system (such as hydrant, monitor, hose reel, deluge system or extinguisher and fire & gas devices), Passive fire protection( Fireproofing ) zone diagram, data sheets of fire fighting equipment, fire water demand calculations, hydraulic calculation and equipment sizing specific to the assigned project and validates them with the Lead Engineer.
• Independently evaluates the fire protection aspect of all the bids received for packages from various suppliers, involves in technical bid evaluation process to ensure that selected vendors meet technical/engineering requirements as stipulated in the project specifications and gives assessment in consultation with Lead Engineer to the Package Engineer.
• Independently prepares the technical reports (fire water demand calculation, fire water hydraulic calculation as per NFPA), line list, set point list and fire & gas system C&E for the assigned project.
• Independently develops solutions to technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and evaluating various options/measures using experience, precedents and professional references.
• Participates in safety meetings, explains the fire protection system to the committee and closes the observations and recommendations in a timely manner.
• Participates in key stakeholder (Client / Supplier / Sub‐contractor / Class) meetings, reviews stakeholders’ documents and addresses interface/implementation/execution issues, and escalates where necessary to ensure that the project proceeds timely and smoothly.
• Provides technical/engineering support and advice to Construction/Commissioning work at site, trouble shoots and follows up to rectify the gaps or problems. Where necessary, provides off‐site support and advice.
• Is responsible for capturing lessons learned in his/her functional area, entering in lessons learned system, and closing out project related lessons learned actions.
• Guide Junior Engineers

Requirements:

• Bachelor or higher degree in chemical engineering or mechanical engineering. Alternatively, Diploma in Engineering with several years of relevant working experience.
• Minimum 7 years of relevant working experience in fire fighting engineering in oil and gas sector for graduates or at least 12 years of relevant working experience for diploma holders.
• For Master degree holder, minimum of 6 years relevant working experience.
• Experience in engineering company or EPC contractor is required
• Must be familiar with the applicable industry standards (NFPA, API) and Classification Society code (ABS, DNV), Company standards, specifications and procedures for his/her functional area.

R1552011

PeakOcean EA License No. 18C9336

Purpose:

To independently define concepts and critical deliverables, lead, plan, manage, control, engineering deliverables required for the assigned project effectively and efficiently according to specified technical requirements, timelines and budget, manage project resources and independently deal with and resolve all issues of the project, and provide guidance to the assigned team.

The incumbent may be assigned to lead a section if required by the company.

Responsibilities:

• Understands the specific specifications and requirements of the assigned project and Industry
• Standard, Classification Society and Regulatory requirements.
• Plans and directs the running of process simulation software, prepares design calculation, performs simulation studies, and reviews the datasheets prepared by Engineers and reviewed
• by Senior Engineers. Where necessary, directs/prepares/conducts simulation studies
• Directs Engineers and Senior Engineers in the team to develop engineering specifications (drawings, data sheets etc.) specific to the assigned project, reviews them and validates with
• the Project Manager and client before incorporating them in the RFQs.
• Independently evaluates all the bids received for process and utility packages from various suppliers, performs a technical bid evaluation process, involves in cost estimation, ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the
• project specifications and gives assessment to the Buyer who will follow up in the tender evaluation, price negotiation and award process.
• Approve drawings and documents from team members as well as 3rd party-generated study reports and ensure the timely provision of accurate documents and specifications to the
• successful vendors to enable the latter to execute their work and deliverables.
• Independently manages/develops/provide advice on solutions to technical/engineering and related issues by reviewing the issues/data and analysis and evaluating various options/measures using expert knowledge, seasoned experience and precedents and professional references where necessary.
• Reports any deviation from COMPANY standard specification and practices, concept change to Department Manager and seek his approval on the solution.
• Anticipate potential problems and takes preventive actions and independently handles variation in project execution. Develop unique solutions for complex technical problem that
• may include new design concept.
• Visits suppliers, reviews test results of process equipment to ensure that they function as per specifications. Where necessary, works with the suppliers/contractors concerned to rectify the deficiencies making sure that they comply with the specifications and are ready on time.
• Lead/participate in meetings, reviews progress and addresses interface/implementation/execution issues, escalates where necessary to ensure that the project proceeds timely and smoothly.
• Independently evaluate the process requirement for all packages in marine & topside contributes to technical bid evaluation process, ensures selected vendor meet technical/engineering and delivery requirements as stipulated in the project specifications.
• Review progress of projects and address complex interface/implementation/execution issues to ensure that the project proceed timely and smoothly.
• Plans and organizes resources and schedule.
• Provides technical/engineering support and advice to Construction/Commissioning, Offshore work at site, directs trouble shooting and follows up with stakeholders to rectify the gaps or problems. Handles more complex issues, and where necessary, provides off-site support and advice.
• Independently prepare facility start-up procedures, finalizes with operation team input and provides expert advice / guidance / trouble shooting for facility start-up at offshore.
• Guides/supervises junior Engineers and provide feedback to department manager for their performance.

Requirements:

• Educational Qualification: Bachelor or higher degree in Naval Architecture, Ocean Engineering, Mechanical Engineering or Chemical Engineering.
• Minimum 15 years of relevant working experience in process engineering in oil and gas sector for degree holders or minimum of 14 years of relevant working experience for Master degree holder,
• Direct work experience on FPSO/FSO projects and
• Minimum 1 to 2 years of relevant working experience in Shipyard.

Required software skills:

1. MS Office

2. AVEVA Engineering

3. Process simulation (e.g., UNISIM Design, etc.)

4. Piping system transient analysis and hydraulics (e.g., Flowmaster, etc.)

5. Fire water system hydraulics (e.g., Pipenet, etc.)

Job Description :

1. Need to take Bar Bending Schedule from rebar structural drawings.

2. Need to Take the exact rebar quantities from the provided drawings.

3. Submission of Cost control reports for total rebars received & total rebars used & wastages.

4. Able to test and use the communication devices.

Job Requirements :

1. Experience in Bar Bending Schedule.

2. Diploma or above relevant qualifications.

3. Previous Singapore work experience will be an added advantage

The Project Engineer is responsible for ensuring proper adoption of resource, quality and risk standards as well as managing project profit during the project lifecycle. He/She coordinates all administrative processes related to a project eg reports, claims, payment of invoices, including the final project handover documentation. He/She typically comes from an engineering industry/background and is able to identify and report project-related issues as well as suggests changes related to quality, risk and administrative processes.

He/She has good communication, customer management and negotiation skills for engaging with both internal and external parties to coordinate project activities between organisational departments and teams during the various phases of a project, as well as managing sub-contractors to ensure they are integrated into the project and adhering to technical requirements.

RESPONSIBILITIES

• Be responsible for the planning, scheduling, controlling and coordinating of building services related works in terms of preventive / breakdown / A&A Works
• To lead a team of supervisors & skilled workers to carry out their works accurately and timely and to ensure that works on site are carried out according to client requirements
• Liaise and hold meetings with clients, Managing Agent & Sub contractor to ensure that all requirements by clients and relevant authorities are adhered
• Monitor, track, and provide timely project progress reports to the management
• Good knowledge and experienced in building related works such as civil engineering, structural, architectural, building repair, carpentry, partition, A&A, renovation, plumbing works etc

JOB REQUIREMENTS

• Candidate must possess at least Diploma/ Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Building Services Engineering, Project and Facilities Management or equivalent.
• Diploma holders with relevant work experience are welcome to apply
• At least 3 Year(s) of working experience in facilities/ building maintenance industry.
• Preferably Executive specialized in Engineering - Civil/Construction/Building Services or equivalent
• Class 3 driving licence (Good to have)
• Must be self-driven & motivated to perform and deliver service excellence

We are looking for project engineer (building) based in Singapore office, if you are interested in becoming part of our SH family, please submit your resume and experience via the submit button below.

• MNC
• Mon to Fri 8.30 am to 5.30pm
• Transport allowance & VB provided
• Knowledge in handling low voltage electrical product
  
  Job Description:
• Evaluate and develop strategies to target new markets and generate leads.
• Collaborate with internal teams to ensure smooth customer delivery.
• Conduct market research and provide feedback to the Sales Director.
• Confidently drive product presentations and market penetration.
• Actively seek new customers with a hunter mentality.
• Offer pre and post-sales technical solutions for electrical products.
• Organize internal training sessions for the sales team.
• Conduct technical training and seminars at customer sites.
• Assist the regional sales team with technical knowledge.
• Prepare technical manuals and demo kits as needed.
• Respond promptly to technical inquiries from the sales team and customers.
• Stay informed about new product launches and acquire relevant technical knowledge.

Requirements:

• Diploma or Degree in Electrical Engineering
• 3 to 5 years of technical support experience with knowledge in handling low voltage electrical product

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Tiang Wan Ying

EA Personnel Reg. No.: R1767473

Responsibilities:

• Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification, and escalation with excellent support and timely service
• Support on desktops, notebooks, printers, scanners hardware components
• Installation, re-installation, troubleshooting and reconfiguration of Microsoft Windows and Microsoft applications that are found in the Desktop PCs and Notebook PCs. Examples of such software are Windows 10 OS or any standard desktop OS, MS Office, Internet Explorer, MS Outlook, MS Outlook Express, etc
• Provide support for queries, escalation, problem determination, resolution and MAC – move, add and change
• Support on Printer Maintenance
• Take on and resolve complex calls or tasks the other engineers could not resolve

Requirements:

• At least a Professional Certificate, Diploma or Advanced/Higher/Graduate Diploma
• Prefer minimum 2 years of end user support environment experience
• Good attitude
• Willing to learn and work in a team
• Strong problem-solving skills
• Excellent client-facing skills
• Professional presence and excellent communication skills
• Able to commit to 24x7 standby duty

• Regularly co-check with the design department for the latest updated construction and shop drawings for execution of works on site.
• Coordinates and check sub-contractors works being carried out, ensuring their compliances to drawings and quality requirements.
• Coordinate with the Construction Engineer and Survey Department for the setting out of works and verifications of alignments on site.
• Site supervision and able to coordinate well with sub-contractors, RE and RTO
• Prepare daily records and reports to the Construction Manager.
• Candidate must at least a Diploma/Bachelor Degree in Civil Engineering or equivalent
• Fresh graduates and or candidates with 1~2 years relevant experience in the related field are welcome
• Be able to work independently with minimum guidance
• Good team player, keen desire to learn, contribute, advance and progress with the company.
• Preferably with experience in LTA MRT projects in Singapore
• An added advantage for those who can start within a short notice.

Roles & Responsibilities:

The candidate will:

• Be part of the project team to build innovative Security solutions for Homeland Security, Smart Cities and Critical Infrastructures.
• Be responsible for the technical/solution designs, code development, and component test execution to demonstrate alignment to the product/functional specification of the solution.
• Collaborate with product/solution architects to create, implement and maintain the product/solution development roadmap.
• Ensure all work adheres to software development methodologies and processes
• Thoroughly document design to ensure the usability, supportability and maintainability of the developed
• Provide strong and timely support to IVVQ team and Site deployment, operation and maintenance in ensuring 24/7 system operational needs

Experience and qualification:

• 7+ years of hands-on experience and expert knowledge of full web application development lifecycle of scalable micro-services-based architectures; including tools, best practices, continuous deployment, dependency/complexity management, scale/performance tuning, monitoring, resiliency, etc.
• Strong knowledge of architectural styles and design patterns
• Experience in leading a software team is good-to-have
• Experience in SCRUM/Agile software development methodologies

Programming languages/frameworks/Technologies:

• Proficiency in the following language/framework: Java, Spring boot
• Proficiency in Angular, HTML5/CSS, JavaScript, and Apache Kafka
• Experience with relational database
• Experience with virtualization and container and knowledge about Dockers and Kubernetes
• Good knowledge related to Elasticsearch.
• Experience with test automation tools and framework for web application is good-to-have
• Experience with setting up continuous integration (e.g. GitLab CI) is good-to-have

Responsibilities:

• Perform risk-based commissioning, qualification and validation service for pharmaceutical and biopharmaceutical clients on one or more of the following areas:

1. Process Equipment
2. CIP / SIP
3. Process Manufacturing and related business processes including Quality Operations and Supply Chain Operations
4. Method validation (analytical chemistry, biochemistry, microbiological)
5. Enterprise system (LIMS, QMS)

• Develop risk assessment, system impact assessments, protocols and reports that support the qualification and validation requirements in the industry.
• Develop validation protocols using a science and risk -based approach that meets regulatory requirements and industry best practices.
• Review, analyse, interpret, and summarize system and process performance data of executed activities for report and presentation to management.
• Investigate deviations, write investigation reports and create summary reports.
• Exercise good judgment within generally defined practices and policies in selecting methods and techniques for obtaining solutions.

Professional Skills and Experience:

• Bachelor’s degree in technical discipline such as Engineering, Pharmaceutical Science or with experience relevant.
• Minimum 2 - 3 or more years of experience in several functions in pharmaceutical industry: commissioning, qualification, validation, quality systems, quality operations, manufacturing, engineering, technology transfer.
• Foundational understanding of ICH Q7, Q8, ICH Q9, ISO 14644, ANSI Z1.4 and other regulatory requirements preferred
• Experience with investigations into manufacturing / laboratory deviations and determination of product impact potential, root cause and corrective/preventive actions.
• Knowledge of Validation Lifecycle approach (URS, FAT/SAT, commissioning, I/O/PQ Protocols, etc), guidelines, international regulatory requirements and other industry best practices.
• Preferred to have experiences in multiple CQV discipline (such as CIP, SIP, process, utility, equipment, automation, computer system, lab system), preferably with advanced technical knowledge in one or more discipline.
• Preferred to have experience interacting with or creating material for management and regulatory agencies.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

Responsibilities:

• Work closely with user department and various stakeholders in the preparation of medical equipment specifications for tenders
• Evaluate tender submissions
• Provide recommendation to users based on technical compliance of medical equipment in tender submissions
• Formulate, implement and review policies and procedures for Group BME, to be aligned with organization and regulatory requirements
• Monitor and track medical device alerts / recalls, and ensure completion of all corrective actions required of the alerts / recalls
• Represent Group BME as the Data Governance and Protection (DGP) Representative and serve as the PIC for all DGP related matters, such as the Personal Data Protection Act
• Assist Group BME and site teams with internal and external audits
• Assist institution BME with site operations, such as Commissioning work (where applicable) to ensure department KPI met
• Liaise and manage external contractors on service and tender commitment issues
• Provide induction, supervise and guide new staff to the work under Governance & Risk / Technology Pillar
• Provide technical advisory to end users and senior management on medical equipment related issues
• Provide advice and guidance to function and institution staff on any arising matters

Requirements:

• Diploma / Degree in Electronics or relevant Engineering course with at least 5 - 8 years of experience in service and maintenance of medical equipment
• Preferably with experience working in healthcare institutions
• Good analytical and organization skills

Interested candidates who wish to apply for the advertised position, please click "apply now" or email us an updated copy of your resume in MS Word format.

We regret to inform that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd

EA License No : 01C4394 | WONG YE XUEN | Reg No: R23117989

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg  I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Responsible in designing and developing new control systems, which can be complex in nature necessitating the expert application of engineering knowledge and control disciplines such as process control, programmable logic controllers (PLC), and supervisory control and data acquisition (SCADA).
• Responsible to prepare, review and approval of drawings, instrument lists, data sheets, elect diagrams, control architecture, logic diagrams, operating procedures
• Responsible to plan and self-monitor daily engineering and design work assignments
• Responsible in controling and monitoring job costs and schedules to meet completion dates, customer technical specifications and internal technical specifications
• Responsible in developing and using engineering standards (electrical, instrument, etc.), procedures and forms for engineering design and production fabrications.
• Responsible in providing engineering advice and support to engineers and Project Managers.
• Responsible in preparing FAT procedure and test Control system
• Responsible in conducting training on plant operation & maintenance.
• Responsible in performing plant start-up & commissioning/ troubleshooting.
• Responsible in representing the company for customer discussions and technical reviews

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5-8 years of relevant experience
• Knowledge of Microsoft Office and AutoCad
• Knowledge of PLC programming experience is a bonus
• Prior experience with SCADA system is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Our client is a well-established MNC, market leader in the Water industry. They are looking for a Procurement Engineer to assist their Procurement team for the next phrase of their business. They are located in Central – easily accessible. This Senior Purchaser would be responsible for :

• Responsible for vendor management to ensure approved vendors meet the delivery, quality and cost standards
• Responsible for the negotiation to ensure and improve suppliers' price competitiveness, lead-time and on time delivery
• Ensure all necessary documents are in place
• Responsible to provide customers with solutions and internal cross functional teams, for cost effectiveness
• Responsible for materials planning
• Liaise with forwarder for shipping arrangment

Job Requirements:

• Diploma / Degree in any discipline
• Minimum 3 years of relevant experience in Oil & Gas industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Responsibilities:

• Maintain, and correlate Metrology apparatus
• Oversee, diagnose, and mend Metrology devices
• Set up and validate new Metrology equipment as required
• Produce and assess statistical information for Gauge R&R tool matching investigations
• Stay updated on the most recent Metrology tool advancements in the Semiconductor Industry

Requirements:

• Bachelor's degree in EE/Mechatronics/Computer Engineering/Physics m
• Understanding of measurement principles, techniques, and procedures
• Familiarity with GR&R, SPC, and the latest Metrology tool advancements in similar industry.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose

Job Responsibilities

• Support duties related to accounts payable and accounts receivable functions
• Process payment transactions accurately and efficiently
• Assist in preparation of monthly accounts schedules
• Perform monthly bank reconciliation
• Maintain monthly fixed assets listing
• Maintain good documentation and proper filing system
• Assist in audit and tax enquiries

Job Requirements

• Minimum 1 year of relevant working experience
• Possess at least Diploma in Accountancy/LCCI or relevant qualification
• Able to work independently with minimum supervision
• Well-organised with strong attention to detail
• Hands-on experience with MYOB
• Proficient in Microsoft Office (Excel, Word, Outlook)

What we offer?

• 1 Year Contract with competitive salary, bonuses and attractive benefits
• Potential conversion to permanent headcount subjected to performance
• Flexible working hours (Monday to Friday)

My company are looking for a Civil Engineer who can preparation of highlighted drawing and documents for ongoing project. Draw shop drawing plan sections & elevations from tender drawings of all civil work. Prepare and collate architectural, structural shop drawing including as-build drawing. Preparation of DLP maintenance schedule. Attend on-site meeting , discuss the project requirements and highlight to client & consultant as necessary, attend site inspection with RTO.

And can independent and self-motivation work.

The candidates need to have construction working experience.

Major of study and degree- Bachelor of Science in Civil Engineering

Responsibilities:

• Operate Road Rail Vehicles safely and efficiently.
• Perform routine inspections and maintenance checks on RRVs.
• Follow operational instructions and safety procedures.
• Load and unload materials and equipment.
• Transport materials and equipment to designated locations.
• Coordinate with team members to ensure smooth operations.
• Report any issues or malfunctions to the Operations Manager
• Maintain accurate records related to RRV operations.

Requirements:

• With 1-3 years of excavator operational experience in Construction Projects.
• At least 1 year related working experience.
• Valid Excavator Operator certification.
• Good knowledge of safety regulations and operating procedures.
• Ability to work independently and as part of a team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

We are seeking a highly skilled and experienced Senior Network Engineer to join our team. The ideal candidate will have a strong background in data center deployments and the construction of large-scale infrastructure.

Responsibilities:

• Lead and execute data center deployments and build large-scale infrastructure.
• Design, implement, and manage network routing and switching protocols including BGP, TCP/IP, VLAN, ISIS, OSPF, and MPLS.
• Perform basic tasks using the Linux/Unix command line interface.
• Analyze complex situations and employ advanced troubleshooting skills, utilizing systems and tools to creatively solve problems under pressure.
• Work with Service Provider network hardware platforms and architectures, including routers, switches, and data center switching platforms (preferred).
• Conduct field-based work in data centers, ensuring efficient and reliable network performance.

Qualifications:

• 8-14 years of relevant experience in network engineering.
• Strong knowledge of network routing and switching concepts and protocols.
• Proficiency in using Linux/Unix command line interface.
• Proven problem-solving abilities and experience in high-pressure environments.
• Previous experience with Service Provider network hardware and data center architectures (preferred).
• Hands-on experience with field-based work in data centers.

Responsibilities:

• Perform troubleshooting, repair, and maintenance of semiconductor equipment.
• Diagnose and resolve equipment malfunctions and failures.
• Coordinate with equipment vendors for technical support and spare parts.
• Develop and implement preventive maintenance programs.
• Conduct regular inspections and performance evaluations of equipment.
• Create detailed repair reports and documentation.
• Collaborate with cross-functional teams to ensure smooth operation of equipment
• Ensure compliance with safety guidelines and protocols.

Requirements:

• Bachelor's degree in Engineering or related field.
• Min 3 years of experience in Semiconductor Industry
• Strong knowledge of semiconductor equipment components and systems.
• Ability to troubleshoot and diagnose of equipment issues.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us

that we may collect, use or disclose your personal information for purpose in connection with

the services provided by us.

Responsibilities:

• Analyze current manufacturing processes to identify bottlenecks, inefficiencies, and potential areas for improvement.
• Develop and implement cost-effective solutions for streamlining production flow, reducing cycle times, and increasing throughput.
• Conduct time and motion studies to assess worker productivity and identify opportunities for automation or process layout adjustments.
• Utilize lean manufacturing principles like Six Sigma and Kaizen to continuously improve processes and eliminate waste.

Requirements:

• Min Degree in Industrial Engineering or it's equivalent
• Knowledge in logistic processes and systems in manufacturing is an added advantage
• Experience & knowledge in manufacturing process/product costing/planning using SAP Software

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Info:

• Salary: Basic salary + Performance Bonus + One Time Bonus (subject to company and individual performance)
• Working Hours: Monday to Friday; 8.30am - 6pm
• Working Location: Lorong Chuan

Job Responsibilities:

• Provide project-specific engineering and design support.
• Develop new technical solutions, increase brand awareness in chosen market segments, and expand market share within the Applied Solution Industry.
• Collaborate with local regional offices to determine and execute new technical engineering processes and systems to achieve the objectives agreed upon by the Solutions Hub and country affiliates (PMI plan). Provide the framework and support to enhance the solutions capabilities of all stakeholders.
• Support the implementation of process improvement and training plans to develop and grow the solutions capabilities of our businesses across all regions.
• Lead and support through change by introducing new ways of working, tools, responsibilities, and expectation mapping and measurement.

Work closely with key engineers to ensure successful delivery in all key process and training activities.

• Lead by example, consistently demonstrating company values.
• Provide high levels of engagement through regular meetings and face-to-face interactions.
• Maintain trusted relationships with stakeholders, employees, business partners, customers, and authorities.
• Analyze problematic situations and provide solutions to ensure resolution and recovery.
• Ensure company policies and legal guidelines are communicated and adhered to from top to bottom within the company.
• Perform other duties as required.

Technical Competencies:

• Knowledge of Schneider Electric, Niagara Framework, and other platforms, Building Automation & Analytics Technologies.
• Proficiency in creating and editing mechanical and electrical drawings using AutoCAD and VISIO.
• Programming experience for Electronic DDC control systems / PLC systems using Functional Block Diagrams.
• Knowledge of instrumentation sensors and field communication protocols, e.g., Modbus, BACnet, etc.
• Ability to understand and modify electrical diagrams and drawings.
• Proficiency in TCP/IP networking and protocols.

Job Requirements:

• Degree in Civil Engineering (Recognized Degree by BCA/PEB)
• Minimum 1 year of experience in constructions with main-con or Civil Engineering
• Excellent time management, organised with positive work attitude
• Possess excellent interpersonal and communication skills

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Tan Chin Yee
Registration Number: R23116373
EA Licence No: 16C8004 (Elitez Pte Ltd)

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

General Description

The incumbent is responsible to provide technical process support to the Production Shift teams and the Facility Owner of the process area in the LNG Terminal.

Roles and Responsbilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

• Provide technical support for routine and non-routine production activities and develop best practices to improve production safety, reliability and efficiency.
• Evaluate current production activities, make recommendations and execute continuous process improvements in the areas of safety initiatives, equipment reliability and operational excellence.
• Troubleshoot for process and equipment problems to ensure greater operational reliability and efficiency
• Measure plant performance including power consumption index, operating index relating to process availability, efficiency and reliability and other relevant field data surveys.
• Undertake energy efficiency and optimisation projects as required.
• Undertake alarm management for assigned area and proactively drive alarms to ensure robust operations.
• Undertake Management of Change (MOC) for terminal modifications and take on lead role for various MOC projects as required
• Support engineering design analysis including preliminary design development, (heat and mass) calculation, technology evaluation and equipment selection.
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, model reviews, Safety Integrity Level reviews, RAM analysis, layout and other process etc and support the design validation process in alignment with contract and regulatory requirements and specifications.
• Review standard operating procedures and start up manuals to ensure compatibility with design limitations and procedures are adequate.
• Lead, review and perform inspection and investigation of equipment and production systems to facilitate optimisation and formulate remedial procedures.
• Assist the Production Manager to report and investigate any related HSSE near miss / violation.
• Custodian of Operation Abnormality Reports, to manage the overall status of the reports, perform initial investigation to determine root cause and to drive root cause analysis and resolution.
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of eight (8) years practical experience in process engineering function in an oil, gas or petrochemical industries.
• Conversant with local/international codes, regulations, standards, best practices in the process.
• Good knowledge of commissioning, operations and troubleshooting of a variety of large and complex processes in the oil, gas or petrochemical industry is critical.
• Knowledge of the LNG / natural gas or other hydrocarbon industries would be advantageous. Candidates with experience in cryogenic plant design, commissioning and start-up are preferred.
• Certified Energy Manager certification will be an advantage.
• Knowledge of Process Safety Management, Process Hazard Analysis and Functional Safety would be advantageous
• Knowledge of electrical, instrumentation, controls and mechanical discipline would be advantageous
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Self-motivated, independent and strong team player
3. Strong interpersonal, written and verbal communication skills
4. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties.

Education

Bachelor degree in Chemical Engineering

• Design and develop control strategies for building automation systems for M&E/ACMV systems.
• Create design and draft system control logic and drawings to fulfil project requirements.
• Collaborate with mechanical design and project engineers for the design solutions and solve engineering problems
• Address issues from customer and operations team feedback to improve the performance of the electrical and controls system.
• Communicate with clients on components selection and quotation to develop project costing

Requirements:

• Degree in Electrical/Controls/Electronics Engineering or equivalent.
• At least 2 years of ACMV Design/Control experience
• Able to prioritize and work independently to meet deadlines.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303