NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corp Lab aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is looking for a highly motivated and experienced candidate to join us as Senior Research Fellow (SRF). The SRF will join in a cutting-edge interdisciplinary research project fund through the Industry-Alignment Funding scheme, aiming to developed novel coatings for biomedical implants.

The SRF will be responsible to design, develop, characterize and optimize the formulation of bioactive coatings for biomedical implants, as well as to manage the coordination of research between different stakeholders in order to achieve project KPIs.

Key Responsibilities

• Conduct thorough literature review and generate periodic updates.
• Design, synthesize, characterize and optimize functional coating for biomedical implants, with particular emphasis on osteogenesis ability.
• Carry out assays and analysis to optimize and control functional performance (e.g. coating thickness, uniformity, assess active agents delivery effectiveness, degradation profile, mechanical strength etc).
• Carry out biochemical and biological assays to assess bioavailability and cytotoxicity of the developed products.
• Ensure compliance with health and safety regulations in all aspects of the research work.
• Develop and optimize protocols.
• Supervise junior research staff, undergraduate and graduate student projects.
• Manage logistical issues and laboratory inventory.
• Coordinate collaborative work within multidisciplinary team and external collaborators.
• Generate periodic progress report as required by funding agency.
• Disseminate research results in reputable peer-reviewed journals and/or international conference.

Job Requirements

• PhD in Materials Science/Chemistry/Chemical Engineering or related fields.
• Experience in biomaterial, nanomaterials synthesis, functionalization, and characterization (e.g. TEM, XRD, DLS, FTIR, TGA, ICP, etc).
• Experience working with biopolymers, thin film coatings. Experience with osteogenesis relevant assays and techniques preferred.
• Experience in mammalian cell culture, tissue engineering, implants. Experience with animal work will be a bonus.
• A strong track record of research ability and demonstrated contribution to research (e.g., research publications, grant applications, patents).
• Good communication and writing skills.
• Excellent interpersonal skills, and ability to work in a diverse, international, and inter-disciplinary research environment.
• Ability to take initiative to improve processes and troubleshoot problems.
• Ability to work well with multiple competing priorities, manage projects and meet deadlines.
• A good team player and able to work independently with minimum supervision.

We regret that only shortlisted candidates will be notified.

JOB DUTIES :

• Design precision plastic injection molds according to requirements.
• Construct design layout and mold design review meeting.
• Communicate with customers in conference calls and on-site design meeting.
• Perform other duties as assigned.
• Required to develop junior engineers.

EXPERIENCE REQUIRED:

• Minimum 7 years relevant working experience
• Minimum Diploma in precision/ mechanical/ manufacturing engineering.
• Proficient in Siemens NX software and Microsoft office applications
• Strong leadership skills. Has positive attitude towards work and eager to learn new skills

• Bachelor's Degree/ Diploma in Geology or a related field.
• Minimum 5 years of relavent experiance in Geotechnical Engineering Works.
• Proven experience in Tunnelling projects is mandatory.
• Prior experience with Rail & Land Transport Authority (LTA) projects is required.
• Strong analytical skills, problem-solving abilities and excellent attention to detail.
• Familiarity with geotechnical instrumentation and ground improvement techniques is an advantage.
• Plan, supervise and ensure quality control for ground improvement work to meet project specifications and standards.
• Provide geological supervision during tunnelling operations to ensure safety and efficiency.
• Develop and implement plans for additional soil investigations related to tunnelling works, ensuring accurate assessment of ground conditions.
• Conduct detailed face mapping to analyse and document ground conditions during tunnelling activities.
• Plan and supervise instrument monitoring works to assess ground behaviour and ensure stability during construction.
• Applicants are required to submit their detailed CV and state the current and expected salary.

Job descriptions :

• Work on SoC/Subsystem define and integration.
• Work on IP developments, Perform Verilog/System Verilog RTL design to meet product specifications and requirements；
• Work with SW Engineer and HW Engineer on all aspect of SoC to optimise Silicon and board level design;
• Work on SoC system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;
• Work on SoC floorplan with APR and HW Team; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support
• Post silicon Debug and support.

Job requirements:

• Bachelor's or Master's degree in electronic engineering with more than 5 years ASIC design experience.
• Experience with ASIC design flow
• Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification
• Experience in video processing and video analytics is a plus
• Experience in USB/SDMMC/DDR IP is a plus.
• Experience in Functional Safety, automotive certification is a plus.
• Passionate and strong in general programming is a plus
• Good understanding of DFT
• Familiar with UNIX/ Linux environment and scripting
• Good communication and interpersonal skills
• Strong analytical and problem-solving skills
• Professional working with bilinguals in Mandarin is a plus

What we offer:

• Competitive salary package
• Medical insurance (including dental)
• Annual Health Screening
• Company trip & teambuilding activities

Job Scope for Engineer – O2genes

As an Engineer at O2genes, you will play a pivotal role in ensuring the seamless operation, installation, and maintenance of our advanced oxygen therapy solutions. Your responsibilities include:

• Installation & Setup: Overseeing the installation and calibration of Hyperbaric Oxygen Therapy (HBOT) chambers, Exercise With Oxygen Therapy (EWOT) systems, and oxygen bar equipment at client locations, ensuring optimal functionality.
• Service & Maintenance: Conducting routine inspections, diagnostics, and preventive maintenance to guarantee equipment reliability and performance, minimizing downtime for clients.
• Troubleshooting & Repairs: Addressing technical issues promptly, performing necessary repairs, and ensuring compliance with safety standards.
• Product Development: Design, innovate, and optimize advanced oxygen therapy solutions, including Hyperbaric Oxygen Therapy (HBOT) chambers, EWOT systems, and oxygen bars
• Quality Assurance: Collaborating with the R&D team to identify improvements and ensure all systems meet regulatory standards and company guidelines.
• And other ad-hoc tasks as required

This role requires a detail-oriented individual with a strong technical background, excellent problem-solving skills, and a commitment to delivering exceptional service that aligns with O2genes’ premium brand standards.

Job Description:

. Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil/Mechanical Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

The Pre-Sales Manager (Cybersecurity) manage the pre-sales team and supports the sales team by providing technical expertise and product demonstrations to potential customers. This role ensures that the cybersecurity products meet customer needs and helps drive sales.

Job Description

• Develop proposal for the tenders/bids.
• Experience in overall design for network and security solutions.
• To prepare and deliver the business value solutions for customers, including proposal writing, presentation, conduct, proof-of-concept to showcase its technical feasibility when necessary.
• Work closely with the product management team to ensure proper customer solution positioning and respond to technical aspects of RFPs/RFIs.
• Arrange technical training for clients and sales teams, and conduct proof of concepts, solution designs, and technical workshops.

Requirements

• At least 3 – 5 years of working experience with knowledge of product pre-sales.
• Preferably having formal experience in pre-sales, post sales, delivery team in a tech industry.
• Familiar in the project methodologies such as Planning, Design, and relevant Technologies
• Excellent written and verbal communication skills to explain complex technical concepts in simple terms.
• Possess in-depth knowledge of current technologies, tools, methodologies and industry trends, Government guidelines.
• Possess relevant professional certification like CISSP would be an added advantage.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Description

• Industry/ Organization Type: Audio Visual (AV) Solutions Provider
• Position Title: Sales Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9am – 6pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Drive sales performance to meet targets and maintain client relationships.
• Engage in B2B sales activities, identifying new opportunities and guiding them to closure.
• Collaborate with business partners and work with the internal AV Design Team to tailor solutions to client needs.
• Negotiate pricing with partners to ensure competitive bidding.
• Compile and deliver weekly sales reports (specific to Assistant Sales Manager role).
• Aid in managing relationships with manufacturers for audio and related solutions.
• Target primary markets within the hospitality and education sectors.
• Seek and establish partnerships for audio solutions to broaden offerings for existing clients.
• Focus solutions on Pro Audio Solutions for large venues such as theatres and auditoriums.

APPLY NOW!!!

• Minimum Diploma in any discipline.
• At least 1-2 years of relevant experience in the AV Industry.
• Proven sales experience in a B2B setting and project-based environment is preferred.
• Familiarity with Pro sound solutions for large venues, Audio & Visual, videoconferencing, and telephony solutions is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70802 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Responsibilities

• Support Project Manager on project documentation, system entries and ensuring compliance to project management process and best practices.
• Lead and maintain project management systems and tools
• Ensure compliance of project information and documentation in grant and project management systems.
• Consolidate and analyze project data and create project dashboards and reports
• Track and monitor project health
• Support other operational activities of the Project Management Office as required
• Responsible for managing the life cycle R&D projects and product delivery by planning, organizing, executing, and evaluating from conception to completion
• Ensure successful delivery of project scope and targets while managing project risk, quality, delivery, scope, schedule, and budget.
• Collaborate and motivate project team members in the design, development, and delivery of R&D solutions to customers.
• Drive design / process validation testing and ensure compliance to project lifecycle governance requirements
• Ability to demonstrate a good level of understanding of technical/engineering processes in managing the project development with the project teams
• Lead, monitor and report the progress of a few projects to all internal and external stakeholders.
• Manage and implement project changes and interventions to achieve project deliverables and mitigate risk.

Job Requirements

• Min. Diploma in Engineering or equivalent qualification
• Have some knowledge in project management
• Proficient in Microsoft Office, especially Microsoft excel and Microsoft Word and PowerPoint for presentation of information in a logical approach
• Ability to thrive within a fast-paced environment
• Able to work independently and as a team

Job Description Summary

All activities relating to enhancing services technology integrating customer data, or capturing engines/products reliability, availability, maintenance, safety and other performance parameters. Includes hourly, nonexempt and exempt employees as well as manager roles responsible solely for these activities. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.

Roles and Responsibilities

• Development of repair and inspection technologies, process qualification, industrialization. Related program deliverables to repair facilities for new and updated processes.
• Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.
• In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.
• Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions.
• A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members

Required Qualifications

• Advanced experience in the Engineering/Technology & Repair Development. Knowledge level is comparable to a Bachelor's degree from an accredited university or college ( or a high school diploma with relevant experience).

Responsibilities

• Inspect panels and electrical systems to identify and resolve any issues or malfunctions.
• Conduct regular tests to ensure proper functioning and compliance with safety standards.
• Ensure that electrical panels and systems meet the required standards and specifications.
• Document electrical panel specifications, wiring diagrams, and system configurations.
• Coordinate with shipyard for the installation, commissioning and testing of all electrical systems and panels.
• Hands on testing, troubleshooting, and commissioning of all supplied electrical systems and panels.
• Work in cooperation with other internal and external stakeholders to ensure that supplied systems pass all relevant class surveys and inspections.
• Produce and document all necessary paperwork for class certifications during commissioning process.

Workshop Inventory Management

• Maintain accurate records of all items in the workshop inventory.
• Monitor stock levels and reorder supplies as needed.
• Conduct regular stock checks and report any discrepancies.

Receiving and Dispatch:

• Receive incoming materials, tools, and equipment.
• Verify the accuracy of received items against purchase orders.
• Prepare items for dispatch, ensuring proper packaging and documentation.

Organizing and Storing:

• Arrange and organize materials in the workshop store for easy accessibility.
• Implement an efficient storage system to maximize space utilization.
• Label and categorize items to facilitate quick retrieval.

Maintaining a Clean and Safe Environment:

• Keep the workshop area clean, organized, and free from safety hazards.
• Adhere to safety protocols when handling, working with and storing materials.
• Ensure compliance with safety regulations and guidelines in all electrical activities.
• Conduct regular safety checks on electrical systems to mitigate potential hazards.

Equipment Maintenance:

• Ensure that workshop equipment, such as tools, machineries, shelves and racks, are in good condition.
• Report any maintenance or repair needs to the relevant department.

Requirements

• Able to read drawings and terminate central cables.
• Strong troubleshooting and problem-solving skills for Electrical main switchboard.
• Familiarity with electrical testing equipment and diagnostic tools.
• Ability to read and interpret technical drawings and schematics.
• Attention to detail and ability to work independently or as part of a team.
• Possession of a Class 3 Driving Licence or WSQ Forklift Operator Licence is advantageous.
• Prior work experience in shipyard is advantageous.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

About Company:
Since its founding in 1894 as a cotton fabric wholesaler in Japan, Our Client, has grown into a global enterprise with more than a 120-year history. Our client, is actively engaging in various business fields including the trading of textiles, machinery, and construction materials, in addition to the manufacturing and sales of medicines, medical equipment, and energy saving products.

Job Description:
- To lead and supervise all design activities in Factory Automation & Smart-Factory project teams to meet customers' requirements.
- Interpret the requirements, translate to proposal & conceptualization for new machine/equipment.
- Liaise & follow-up with customer on project proposal, subsequent project activities & development.
- Monitor & follow-up on project team to ensure a smooth work flow in the manufacturing & assembly process.
- Lead & mentor project & design reviews with customer’s requirements & feedback on project matters.
- Follow-up with vendors on matters related to the project.
- Perform detail designs & critical drawings.
- Liaise with respective vendors & suppliers for quotations & fabrication after PM's approval.
- Lead meetings & review on design requirements & specification.
- Be mentor to provide guidance to design engineers/assistant engineers in their job scope, including detailed designing, selection of materials/standard items, checking of drawings etc.
- Draft machine testing protocol (especially for critical function) enabling the manufacturing team to test run machines.
- Ensure that all project documents, drawings & materials are updated and appropriately documented and compiled accordingly.
- Lead & team up with cross-disciplinary teams on smart factory technologies & projects.
- Ideate and build robust data and digital technology driven solutions for advanced manufacturing/industrial processes.
- Leverage AI & robotics-integration solutions to meet automation & real-time needs.
- Other ad hoc duties as assigned by the company

Job Requirements:
- Possesses minimum 4 years of related working experience, preferably having experience as Lead or Senior Design Engineer
- Experience in automation design, Factory Automation and/or SMART Factory platform
- Having a mechanical engineering background is an asset
- Working experience in mechanical design apps/software, e.g. INVENTOR, 2-D AutoCAD, etc.
- Strong problem-solving skills and attention to detail.
- Excellent communication and teamwork abilities

Compensation:
- Working location: Tuas, Singapore
- Working hours: Monday to Friday 8:30am - 6:00pm
- AWS
- Variable bonus
- Medical benefits
- Annual leave

Project Management:

1. Assist Project Manager to plan overall schedule and tracking and prioritize job card sequence and methodology according to contractual requirements and onboard vessel/site condition.
2. Lead, manage and supervise project team on the execution of works as well as ensuring the delivery of assigned projects within the planned schedule.
3. Direct and plan sufficient resources of manpower, material, and equipment for the project team for meeting the targets according to contractual requirements.
4. Attend daily vessel coordination meetings with clients and prepare daily reports on progress.
5. Attend or chair meetings with clients, ship crews, vendors, and classifications of society for work scope clarification, permits to work systems compliance, schedule updates, working methodology planning, and any other contractual matters as required.
6. Be responsible for the team's wellbeing during traveling and offshore.
7. Any other associated tasks and responsibilities assigned from time to time by the organization.

WSH Management:

1. To facilitate the safe execution of works particularly in hot and any other incompatible works according to onboard vessel/site conditions as and when required.
2. Administer and plan for risk management with regards to all works carried out in ensuring best safe work practices are in place.
3. Responsible for the overall safety and health standard of work together with the project manager throughout the execution of projects as assigned.

Contract and Cost Management:

1. Perform as organization representative and be responsible as per contractual requirements throughout project execution duration.
2. Coordinate with the costing department and be alert in overall costing control to ensure maximum profit return to the organization.

Knowledge and Skills:

1. Able to travel overseas, offshore on short notice and on a long-term basis.
2. Able to attend to projects’ needs as and when required.
3. Strong level of planning, organization, people management, and communication skills in critical decision making and quick problem-solving.
4. Good knowledge of different scopes of work in aspects of the hull, mechanical, piping, and electrical for marine and offshore industries shall be advantageous.
5. High level in marine and offshore standards or class requirements on various works.
6. Good computer skills in Microsoft Office and Project.

Japanese MNC

Salary $2600-$3000

Location: Ubi

Industry: Electronic Component Manufacturer

Monday to Friday 8.30am to 5pm

Requirements

• Electro-mechanical engineering background preferred and the company will provide necessary training for the candidate to assume this position
• Ability to travel at short notice to S.E. Asia and other markets as required by the superior

Job Roles

Technical aspects

• To inspect, service and maintain our company’s crimping tools, machines and equipment to ensure they remain in tip top condition prior to shipping to our customers
• Provide on-site after-sale service such as repair, replace spare parts and provide technical education to the customers who may encounter technical issues when operating our crimping tools, machines and equipment
• Troubleshoot, analyse and recommend service or repair methodology on the crimping tools, machines and equipment to the customers whenever there is a technical breakdown affecting their production operation
• Overhaul and inspect conditions of crimping tools, machines and equipment returned by the customers
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

The Early Mental Potential & Wellbeing Research Centre’s mission is to maximise every child’s mental and emotional capital by uplifting neurodevelopmental trajectories during early sensitive periods through interdisciplinary discovery science and translational technologies.

Toward this aim, we engage in 3 major activities and thrusts:

1) Core Discovery Research, Empowering Science: Basic neuroscience research and advanced computational models to understand individual neurocognitive potential, developmental trajectories, and risk and resilience factors;

2) Translation to Clinic & Pedagogy, Empowering Practitioners: Developing precision assessment and intervention tools to optimise parent-child social and mental health within clinical, education and community settings;

3) Translation to Real-World Technologies, Empowering Families: Creating scalable solutions and real-world technologies for parents to enhance their child’s mental and cognitive wellbeing at home.

We are looking for an experienced Research Fellow to contribute toward data collection and analysis, including both behavioural and brain imaging studies.

Key Responsibilities:

The successful candidate is expected to be:

• Contribute toward the conceptualization and design of research studies.
• Plan, execute, and oversee experiments
• Assist with analysis of infant data, which may include both EEG and MRI/MRS data.
• Supporting wider recruitment and testing efforts
• Manage timelines, resources, and project milestones to ensure deliverables are achieved on time and within budget.
• Provide scientific and technical input to hypothesis generation, experimental design and execution, and result analysis.
• Provide assistance for writing of report, patents and journal manuscripts.
• Presentation of research projects as required.
• Provide guidance and mentorship to junior researchers and students involved in the project.
• Performs any other related duties as assigned by the Principal Investigator.

Job Requirements:

• PhD degree in Psychology, Neuroscience, Biomedical Engineering, Medical Sciences or related Technical and Computational fields
• Experience with human psychological data collection, working with children (particularly infants) and families
• Efficient, organised and self-motivated with the ability to work to tight deadlines
• Good team player with strong interpersonal and communication skills
• Experience with EEG and other brain imaging techniques
• Skills in programming and/or computational analysis of data
• Interest in parent-child social interaction and the early development of executive functions and cognition

Candidates with a proven track-record in one or more of these areas are welcome to apply. We will begin reviewing applications from Jan 2025 onwards, until the position is filled.

We regret to inform that only shortlisted candidates will be notified.

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Our client is a Engineering Industry. Due to their current expansion plan, they are looking for a Outbound Planner to join their team, in hopes of developing the current high performing team. They are located in the East.

Key Responsibilities:

• Daily communication with end customers, Sales Areas, and Distribution Services.
• Execute customer orders, ensuring accuracy and completeness.
• Monitor the entire order fulfillment process (Order to Delivery).
• Ensure correct use of criticality codes and modes of transportation.
• Expedite orders and identify alternatives for long lead-time parts.
• Propose improvements to optimize costs for Sales Areas and Customers.
• Prepare monthly Service Level Reports.
• Schedule and conduct conference calls (GoToMeeting) with Sales Areas; prepare minutes of meetings.
• Liaise with the Global Pricing Team for price updates in the Sales Area System.
• Coordinate with the Freight Team to ensure timely shipments.
• Run aging reports to schedule outstanding orders and update due dates for visibility.
• Investigate, follow up, and resolve issues such as: Missing pricing, expedited delivery dates, credit notes, miscellaneous invoices, or technical issues with TSD.
• Handle emergency orders up to Proof of Delivery (POD).
• Address special Sales Area requirements, including:Inspection arrangements, container arrangements, L/C terms, FOB/Ex-Work shipping arrangements, and document preparation for claims when required.

Job Requirements:

• Diploma in Logistics Management or Bachelor’s degree in Logistics.
• 3 to 5 years of experience in supply chain or customer service roles.
• Comprehensive knowledge of logistics systems and supply chain management.
• Proficient in ERP systems and business management tools (e.g., System 21, Aurora, Maximo).

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

R24122162 | LAI CHAI LI

Responsibilities:

Plan, design and administer contract/project of mechanical and electrical engineering works for building service including

• Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Minimum 3 years of relevant experience. Fresh Graduates are welcomed.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

ACMV Engineer

5.5 Days || 8.30am - 5.30pm (Mon - Fri); 8.30am - 12.30pm (Sat)

Location: East - Changi Area

$3,000 - $5,800 salary depending on experience & qualifications

Requirements:

• Diploma / Degree in Mechanical Engineering
• Candidate with more than 10 years of relevant experience will be considered for Senior position
• Preferably candidate with relevant working experience in the Construction Industry especially in ACMV system installation
• Sound knowledge in ACMV System, Local / International Code of Practice / Standard, Green Mark Requirement, Hydronic / Static Calculation, BIM, Revit, AutoCAD would be an advantage

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors, main contractor or clients on shop drawings, materials and samples
• Review and align ACMV design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with subcontractors / contractors / clients to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Job Description :

· Preparing, optimizing, updating and maintaining the departmental planned maintenance master schedule

· Developing/ update departmental preventive maintenance work plan including works procedure, Risk Assessment, Bill of material, method statement, start-up check list, isolation list, work schedule, etc

· Preparation of plant equipment data master list

· Review/ tract departmental work order to identify repetitive defects

· Maintenance of departmental inventory to prevent overstocking or out of stock occurrence

· Planning of schedule maintenance

· Preparing progress report of the schedule maintenance

· Assist in departmental purchasing/contracting works

Requirements :

· Degree in Mechanical Engineering with at least 3 to 5 years' experience in Turnaround/ Maintenance or Project work or 5 to 10 years' in Maintenance/ Turnaround experience in Power Plant, Refinery or Petrochemical Plant

· Competent in organizing/ preparing work scope and work method statement

· Able to read P&ID diagram

· Good in MS Office (Excel, Word, PowerPoint)

· Company transport provided at Choa Chu Kang/ Jurong East MRT station

Work Location : Tuas South

**We regret that only shortlisted candidates will be notified. Personal data collected will be used for recruitment purposes**

Responsibilities:

• Conduct user research, create wireframes, and design intuitive user interfaces.
• Develop visually appealing designs that align with brand guidelines.
• Design seamless interactions, user flows, and animations.
• Collaborate with developers, product managers, and stakeholders to implement designs.
• Create prototypes, test usability, and refine designs based on feedback.
• Document design guidelines and mentor junior designers.

Requirements:

• Proven experience as a UI/UX Designer with a strong portfolio.
• Proficiency in tools like Figma, Sketch, or similar.
• Strong understanding of user-centered design principles and usability best practices.
• Excellent visual design skills with attention to detail.
• Knowledge of front-end technologies (HTML, CSS, etc.).
• Effective communication and collaboration skills.

(EA Reg No: 20C0312)

You may submit your resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

• Identify customer needs and recommend product solutions.
• Responsible for the technical support for both presales and post sales.

Requirements:

• Degree in Electronics/Electrical Engineering
• At least 2 years of sales experience in artificial intelligence/physical security/CCTV or smart workspace solution.
• Knowledge of TCP/IP, Network Structure, Firewall, LAN and VLAN

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Title: Executive Project Engineer (Contract Basis, with potential for Full-Time)

Job Type: Contract (with a view to Full-Time)

Commencement Date: Immediate (Mid-February 2025)

Location: Around Singapore (East)

Job Description:

We are seeking a highly motivated and experienced Executive Project Engineer to join our team on a contract basis, with the potential for full-time employment. In this role, you will assist the Director in managing ongoing projects and ensuring successful project delivery from start to finish.

The ideal candidate will have experience in handling ongoing A&A (Additions and Alterations) works and possess a strong understanding of construction site operations. Prior experience as a Resident Technical Officer (RTO) or Architectural Clerk of Works will be an advantage.

Key Responsibilities:

• Assist the Director in overseeing the execution of ongoing projects.
• Manage and monitor the progress of A&A works, ensuring that project timelines and quality standards are met.
• Communicate effectively with building owners and stakeholders to understand and fulfill their requirements.
• Collaborate with in-house teams and subcontractors to ensure smooth operations on-site.
• Solve on-site issues proactively and efficiently, ensuring minimal disruption to project timelines.
• Provide regular, timely project updates to the Director and stakeholders.
• Ensure compliance with all relevant safety regulations and standards on-site.
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• Meet project progress targets and manage project budget, ensuring cost control and resource optimization.
• Provide regular project updates to the Director and stakeholders.
• Ensure that all documentation, including reports, project plans, and drawings, are up-to-date and accurate.

Requirements:

• Bachelor's degree in Civil Engineering, Architecture, or related field.
• Proven experience in handling A&A works, preferably in a project engineering or site management role.
• Prior experience as a Resident Technical Officer (RTO) or Architectural Clerk of Works will be advantageous.
• Strong communication skills, both written and verbal, with the ability to interact with building owners, in-house teams, and subcontractors.
• Positive and proactive work attitude with a strong problem-solving mindset.
• Ability to handle multiple tasks, prioritize effectively, and meet tight deadlines.
• Familiarity with project management software and tools.
• Willingness to work on-site and handle any ad-hoc challenges that arise.
• Able to handle tight work schedules and project requirements
• Singapore Citizen and Permanent Residents will be considered first.

Why Join Us?

• Opportunity to transition into a full-time position based on performance.
• Work with a dynamic team and gain exposure to a wide range of projects.
• Immediate commencement, with a focus on delivering results and growing professionally.

If you're looking for a challenging and rewarding opportunity in a fast-paced environment, we encourage you to apply. We look forward to having you on our team!

Our client is a distributor of automotive and industrial solutions.

• Manage and configure infrastructure systems and applications, network devices, desktops, mobile devices, and remote devices.
• Ensure automatic system backups, successful execution of recovery and disaster recovery plans, application of patches, and closely monitor system resource usage.
• Collaborate with external vendors to ensure compliance with Service Level Agreements (SLA).
• Research and source products, solutions, and vendors for ongoing projects.

Requirements:

• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of relevant working experience.
• Skilled in enterprise networking, with expertise in WAN, LAN, and VPN optimization, implementation, and support.
• Knowledgeable about Alcatel PABX, FortiGate devices, Cisco Systems, and Unifi Wireless AP Controllers.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

We are seeking a highly skilled AI Engineer specializing in Large Language Model to contribute to the development of a scalable and optimized South-East Asia foundation language model. In this role, you will collaborate with multi-region teams, adopting the advanced AI technologies and applying AI models and strategies to enhance business models. Your primary focus will be on following and crafting the advanced AI algorithms for South-East Asia language in the ecommerce domain.

Job Description:

• Contribute to the research and implementation of pre-training and alignment algorithms include ultra-large-scale multilingual pre-training technology, Mixture-of-Experts model training, Instruction Pretraining, SFT, and RLHF.
• Contribute to the explanation and safety improvement of AI, especially in trustworthy Large language models.
• Follow the frontier technologies and make comparisons about the advanced technologies to apply in business scenarios.
• Conduct experiments to test the performance of different AI models, identifying areas for improvement and exploring new directions for enhancement.
• Work collaboratively in a team environment, applying expertise in statistics, scripting, and relevant programming languages.

Requirements:

• Doctorate degree in Computer Science, Information Technology, Programming & Systems Analysis, or other related disciplines
• Excellent coding skills, data structure and basic algorithm skills, proficiency in Python/Pytorch coding.
• Minimum 1 year of research experience in basic principles and training methods of industry-leading LLM (such as GPT, LLaMA).
• Have research experience in text generation or dialogue systems
• Excellent problem analysis and solving skills, able to deeply solve problems in large model training and application.
• Good communication and collaboration skills, able to explore new technologies with the team and promote technological progress.