Role:

ACMV Engineer (Mayflower / Construction / Up to $7000)

Interested applicants can send your resume to [email protected] and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

• 5.5 Days || 8.30am - 5.30pm (Mon - Fri); 8.30am - 12.30pm (Sat)
• Mayflower (Office); Working location: Various locations (to be discussed during interviews)
• $3,000 - $4,500 // $4,500 - $7,000 (Senior)

Requirements:

• Diploma / Degree in Mechanical Engineering, or Diploma in similar fields.
• Must have design and installation experience in ACMV, BMS, DfMA, Ductless Jet Fan, ESCS system etc.
• Experience with ICDD (Interface Control & Data Document) is preferred.
• Must have direct work experience in the construction industry.
• Good knowledge of codes, standards, and procedures.
• Proficient in MS Office, AutoCAD, Revit etc

Responsibilities

• To review and manage all design documentation for ACMV, BMS, DfMA, Ductless, ESCS system etc.
• Able to understand construction shop drawing.
• Familiar with calculation of heating/cooling load, equipment sizing (MV& AHU), Electrical load etc.
• To develop ICDD documentation
• To monitor and verify installation of ACMV Equipment, chillers, air handling units, MV system, packaged units, VRV system, and split units.
• To study and assess drawings, plans, specifications, and other documents relating to the construction project.
• To review, assess and evaluate the execution of the project on a regular basis.
• To troubleshoot and resolve complex issues arising in a project.
• To carry out site visits throughout the project to record information on the progress of the project against the agreed programme.
• To verify material requisition and taking-off quantities/site measurement.
• To attend to site tests and inspections.
• To ensure quality standards and all health & safety requirements are adhered to.
• To maintain, manage, and document all project reports and statements.
• To perform other related duties, as assigned Job Requirements.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Summary:

To be responsible for the safe and efficient operation of a designated fleet of vehicles.

Role Responsibilities:

Fleet Maintenance:

Maintain the upkeep of a fleet of vehicles.

(E.g., SCDF Command Vehicles, Next-generation Fast Response Car (FRC), Tactical Vehicle (TAV), general-purpose cars, protected public order carriers, motorcycles, armed response cars, pursuit cars, prisoner transport vans, transfer of plant and equipment …etc.)

• Providing reports/presentations to management on budgeting, schedules, maintenance, and fleet progress

• Maintaining end-to-end accountability for customer satisfaction and overall delivery excellence within specific service level agreement.

Inventory Management:

Understanding the pipeline of demand and work with the Resource Planners to ensure an appropriate supply of resources and spare equipment

Procurement:

Source and Issue PO to vendor for vehicle repair work.

• Coordinating the efforts of internal/external stakeholders and Service Providers to support the fleet maintenance process.

Knowledge and Other Requirements:

• A diploma in Mechanical Engineering and/or a related degree; or equivalent work experience

• Good understanding of engineering and maintenance practices, parts supply, and support strategies within a fleet service environment

• Understanding of significant legislative and Regulatory constraints e.g. Motor Vehicle Type Approval Regulations, Provision and Use of Work Equipment, Health & Safety etc.

• Experience managing external vendors, commercial negotiations

• Flexibility to adjust to multiple demands, shifting priorities, ambiguity, and rapid change.

• Possess a driving license

• Ability to manage risk and encourage strategic risk management-based delivery in others to manage expectations and communicate effectively.

• Preferably with 2 years’ experience in heavy vehicle Preventive and Corrective Maintenance

• Preferably with 2 years’ experience in commercial vehicle fleet management.

• Basic network/infra knowledge (E.g., switches, routers, firewalls, certificate renewal) required.

• Singaporean (Requirement for MHA clearance)

• Class 3/3A driving license

Other Information:

• Working hours: 08:30AM – 06:00PM

• Number of Working days per week: 5 (Mon-Fri)

• Working Location: Ang Mo Kio Street

• Standby/recall duties (required)

Responsibilities:

• Understanding and carrying out all tasks given by the Senior Engineer.
• Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.
• Ensuring all expenses stay within the allocated budget.
• Performing regular inspections of equipment and scheduling maintenance or repairs.
• Providing assistance to different staff or engineering teams.
• Inspecting inventory and reporting inconsistencies as well as ordering more materials.
• Producing CAD drawings according to specifications.
• Evaluating all products and processes and ensuring standardization of quality assurance measures.
• Participating in various learning experiences, which may include attending workshops and training sessions.
• Calibrating and troubleshooting equipment as required.

Requirements:

• An associate’s degree in the relevant engineering discipline.
• A bachelor’s degree may be preferred.
• A completed apprenticeship or similar experience is recommended.
• Strong analytical, troubleshooting, problem-solving, and communication skills.

Job Responsibilities:

• Engage in sourcing, review contract, vendor management, vendor set up and cost savings
• Support all sourcing & procurement activities for new or existing business including transition activities
• Be responsible for saving deliverables
• To manager and negotiate pricing, commercial terms with suppliers and recommend the most competitive suppliers and subcontractor
• Review specifications and ensure materials ordered meet proper quality standard and comply to contract specifications
• Manage vendor insurance program: insurance payment tracking, follow and renew contract insurance
• Review external providers (i.e.vendors and subcontractors) term of service and project deliverables
• Support, development and implementation of procurement guidelines and processes
• Collaborate with other functions as required (i.e. Project & Engineering, Finance, HR)
• Possess leadership skills to manage internal and external stakeholders, thinks strategically and critically, exercising judgement after consideration for all aspect.
• Support any ad hoc tasks as assigned by superior not limited to duties/responsibilities a described above and which may be subject to changes as needed to support the business requirements.

Job Requirements:

• Candidate must possess Bachelor Degree
• Min. 5 years of experience in procurement preferably construction (M&E) industry
• Have experience working in large scale projects
• Experienced in contract negotiation, administration and /or management
• Knowledge in construction/contract law & different standard forms of contracts
• Excellent communication and negotiation skills, analytical mindset, problem solving abilities, as well as keen interest and motivation in a high growth and entrepreneur environment
• A high level of integrity, dependability with strong sense of urgency and result orientated

JOB DESCRIPTION:

• Full time position based in workshop / client facility.
• Carry out routine maintenance of ship to shore cranes.
• Repair and servicing deck cranes and equipment.

REQUIREMENTS:

• Nitec in Mechanical / Mechatronics or related
• Experience in heavy machinery in ports, shipyards or heavy industry will be an added advantage.
• Highly motivated individual.
• Singaporeans Only

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Responsibilities:

· Responsible for assuring the implementation and compliance with the Quality Assurance System.

· Control and monitor all activities related to Quality Management System (QMS).

· Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents

· Responsible for the quality and workmanship of every activity, through knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.

· Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.

· Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP

· Liaise the Technical Engineer for submission of material submittals to Consultant

· Other ad-hoc duties assigned by Senior Manager (QA/QC).

Requirements:

· Diploma in C&S Engineering / Architecture or equivalent

· Minimum 2 years of QA/QC experience in construction industry

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

We're on the lookout for a top-tier Software Quality Engineer to join our team, delving into both Automation and Manual testing within our cutting-edge modules. We're seeking someone with exceptional communication skills, ready to dive into technical discussions and solutioning sessions.

• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package.

Responsibilities:

• Execute a range of tests, encompassing manual, functional, performance, and exploratory examinations, alongside User Acceptance Testing (UAT).
• Provide support in addressing issues encountered during testing and implementation phases, ensuring swift resolution.
• Collaborate closely with internal development teams, external vendors, and end-users to orchestrate seamless User Acceptance Testing (UAT), system integration evaluations, and performance assessments
• Champion the incorporation of cutting-edge technologies, methodologies, and tools within Agile software environments.
• Uphold stringent Quality Standards throughout the software development lifecycle, ensuring excellence at every phase.
• Execute both manual and automated test scripts.

Job Requirements:

• Bachelor's degree in Computer Science, Engineering, or related field.
• Minimum of 3 years of experience in software quality testing and automation.
• Proficiency in Cypress, Selenium and K6.
• Experience working in Agile development teams.
• Excellent communication and collaboration abilities
• Familiarity with other automation tools and frameworks will be an added advantage.

Interested candidates may apply via email to [email protected] (indicating Job ID J43758 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – Outsourcing Team
ScienTec Consulting Pte Ltd – 11C5781

Responsibilities

• Undertake detailed geotechnical design and analysis
• Review of all design drawings to ensure comply with relevant statutory standard, regulations and codes of practices.
• Project coordination including submission to local authorities and liaison during the construction stage.
• Planning and designing of civil and ground Improvement works
• Review and verify all Civil and Structural related engineering works are comply to requirement
• Co-ordinate with authorities, client and consultants
• Evaluate subcontractor’s risk assessment, safe work procedures and method statements
• Ensure that document control and site records are properly updated in compliance to project quality plan (PQP)
• Responsible for attendance to daily site coordination meeting and provide detail coordination with subcontractors.

Requirements

• Min Degree in Civil Engineering/Geotechnical Engineering or equivalent
• Excellent experience in MRT/LTA/RAIL/LRT projects.
• Extensive skills geotechnical designs

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description & Requirements

Responsibilities:

• Review and manage the design of geotechnical works, including ERSS, piling, ground improvement, slope stabilization, etc.
• Analyze soil profiles and evaluate toe levels for ERSS works
• Conduct feasibility and optioneering studies for geotechnical works using in-house engineering capabilities
• Interpret instrumentation and monitoring data and collaborate with consultants to address related issues
• Attend regular and ad-hoc meetings and coordinate with clients, authorities, QPS, and consultants as required
• Provide construction support by preparing and reviewing shop drawings for geotechnical works
• Assist with relevant authority approvals (LTA, DBC, PUB, etc.) in the area of geotechnical works and impact assessment
• Participate in LTA Project Safety Reviews (PSR) for CDSS and CNSS
• Assist with pile testing, including ultimate and working load tests
• Assist with pumping tests and other tasks as assigned.

Requirements:

• Bachelor's degree in Civil Engineering or equivalent.
• At least 2 years of experience in the construction industry.
• Independent, self-motivated, responsible and possess a good working attitude.
• Proficiency in geotechnical engineering software and CAD is preferred.

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Samuel Goh

EA License Number: 22C1430

Registration Number: R23112614

Position Type: Full-Time Design Engineer

• Industry: Engineering
• Department: Design and Engineering
• Working Days & Hours: 5 Days. Monday to Friday, Office Hours
• Work Location: Within Central Location at Macpherson
• Entry Level Salary: Up to $2,600 Monthly Basic (Training Provided)
• Experienced Talent Salary: Up to $3,500 Monthly Basic (Based on Relevant Experience)

Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and/or Jig & Fixture, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure manufacturing drawings meet specifications and requirements.

Requirements (For Entry Level):

• No prior experience required; training provided.
• Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).
• Proficiency in English and Mandarin to communicate effectively with Mandarin-speaking customers and counterparts.

Requirements (For Experienced Level):

• Minimum 1 year of relevant working experience, preferably in Manufacturing Automation/Jig & Fixture industry.
• Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000

Poon Weng Teik (Wilson) | EA Personnel Licence: R1657737

Project Engineer
Basic: $2,700 - $3,800
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Jalan Kilang Timor, Redhill (Office) / Islandwide (Site)

Responsibilities

• Able to manage project with minimal supervision;
• Attends external project kick-off meetings, meetings with clients or consultants as well as technical and co-ordination meetings, project meetings and internal project closure meeting;
• Ensures the adherence to the safe work procedure (SWP) established; and implement risk control measures;
• Resolves site problems proactively in a timely manner;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by reducing materials wastage, usage of tools and equipment, etc;
• Request and initiate orders of materials required for projects;
• Documentation on project progress and damage;
• Ensures proper project documentation including email communication;
• Any other related duties as assigned.

Requirement

• Degree in Mechanical Engineering or. Diploma in Mechanical Engineering with working experience.
• Knowledgeable in MS Office, MS Project and able to read construction drawing.

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Descriptions:

• Maintaining and administering the networks environments including hardware, and configurations.
• Performing disaster recovery operations and data backups when required.
• Protecting data, software, and hardware by coordinating, planning and implementing network security measures.
• Troubleshooting, diagnosing and resolving hardware, software, and network problems.
• Replacing faulty network hardware components when required.
• Monitoring network performance to determine if adjustments need to be made.
• Coordinating computer network access and use.
• Administer, and troubleshoot network infrastructure devices, including wireless access points, firewall, routers, switches, controllers.
• Responding to inquiries from users, IT peers, vendors and to provide technical assistance and support.
• Ensure control and compliance for the systems and servers related are available to only authorize users which follows policies and SOPs closely.
• Attending audit meetings and ensure proper documentation of all work done.
• Vendor management
• Establish/maintains customer relationship with partners or internal users to ensure complete understanding of business processes to enable the delivery of viable Infrastructure solution.
• Provide PABX support based on Client’s SOP and documentation
• Attending to machine faults related to network problems during office and after office hours.

Job Requirements:

• 3-4 years of network
• Network security
• HPE network
• Wifi knowledge (Aruba or Cisco)
• Fortigate, Palo, or Cisco firewall experience
• Megapop and SD-WAN knowledge
• Work with vendors
• Networking best practices
• PABX knowledge (will be good)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E • EA License No. 01C4394

• Reg. <R1548745> <Teoh Shiau Swang>

Responsibilities:

• Good technical and project management abilities.
• Strong ability to develop, plan and organize resources efficiently.
• Communicating plans and challenges and options in engineering issues and solutions to various stakeholders and Clients alike.
• Inspiring a team of different nationalities and cultures.
• Professional integrity and exemplary conduct at all times.
• Proven problem-solving and achievements.
• Comfortable at work site conditions.
• Site supervision and able to co-ordinate well with sub-contractors, RE and RTO.

Requirements:

• At least 3 year(s) of relevant working experience in construction is required for this position.
• Candidate must possess at least a Degree in Engineering (Civil/Structural) or equivalent.
• Preferably Managers specializing in Engineering - Civil/Construction/Structural or equivalent.
• Knowledge in Microsoft project.
• Full-Time positions available.

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Responsibilities:

• Good technical and project management abilities.
• Strong ability to develop, plan and organize resources efficiently.
• Communicating plans and challenges and options in engineering issues and solutions to various stakeholders and Clients alike.
• Inspiring a team of different nationalities and cultures.
• Professional integrity and exemplary conduct at all times.
• Proven problem-solving and achievements.
• Comfortable at work site conditions.
• Site supervision and able to co-ordinate well with sub-contractors, RE and RTO.

Requirements:

• At least 5 year(s) of relevant working experience in construction is required for this position.
• Candidate must possess at least a Degree in Engineering (Civil/Structural) or equivalent.
• Preferably Managers specializing in Engineering - Civil/Construction/Structural or equivalent.
• Knowledge in Microsoft project.
• Full-Time positions available.

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

• MNC
• Location: Alexandra Road
• Monday - Friday: 8.30 AM - 5.30 PM
• Good company benefits
• 1 year Contractual (renewable)

RESPONSIBILITIES:

• Develop and execute business strategies aimed at sustaining business growth and attaining sales revenue objectives.
• Identify and explore new market prospects through proactive prospecting efforts.
• Organize and oversee sales and marketing initiatives such as roadshows, exhibitions, etc.
• Take charge of handling new sales inquiries and preparing quotations.
• Collaborate closely with the Marketing team to strategize on positioning, pricing, sales presentations, volume forecasts, and budgeting.
• Provide supervision, training, and motivation to retail outlet staff to ensure achievement of established Key Performance Indicators (KPIs).
• Stay updated on consumer and competitor trends and conduct thorough analysis of relevant information.

REQUIREMENTS:

• Hold a Bachelor's degree in sales and marketing, or a related field.
• Have a minimum of 2-3 years of sales experience in the telecommunications industry.
• Demonstrate strong presentation, communication, and negotiation abilities, with a proven track record in relationship building and management.
• Ability to work in a fast pace environment.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chua Xue Min (Joesefyn)

EA Personnel Reg. No.: R23113090

We are looking Data Engineer with below skills

Core Java

• Fundamental knowledge of distributed architectures, SOA, Micro-services, PaaS

• Good knowledge of data manipulation using distributed data processing systems such as Spark SQL

• Required to have good SPARKS skills

• Hands-on experience on HDFS (Hadoop), spark, impala, hive, as well as database technology

• Source Code Control (experience with Git preferred)

• Able to perform Unix / Linux scripting

• Knowledge in Distributed computing, Big Data Analytics, Data Transformation

• Relevant industry experience in large scale crawling on cloud platforms would be favourably considered

• Computer Science fundamentals in algorithm design, problem-solving, and complexity analysis

Please share resume to [email protected], [email protected], [email protected]

Responsibilities:

• Review and study the contract drawing for construction before construct.
• Check and ensure all the construction drawing and materials to meet the required standard.
• Assist Project Manager on all site work, supervision works, schedule and planning for project progress.
• Manage daily work on site, including supervising and monitoring the site labour force.
• Discuss with Head of Department for site problems and technical difficulties and resolve on site and coordinate with M&E team for site progress.
• Attend consultant meeting and highlight the discrepancies to ensure all works are carried out in accordance with the drawings, specifications and construction procedures and BCA requirements.
• Liaise and conduct sub-cons meeting for daily work.
• Prepare and submit drawings and documents according to the project requirements.
• Inspect all Structural and Architectural work with RE/RTO and kept record the entire document properly.
• Prepare paperwork for ISO and GGBS documentation for BCA audit.
• Filing the document of project paper works and As-built drawings up to date.
• Ensuring compliance to Workplace Safety and Health Acts
• Attend WSH meeting, daily toolbox meeting and Site WSH inspection.

Requirements:

• Diploma in C&S Engineering / Architecture or equivalent
• Preferably with working experience in foundation works
• Proficient in Microsoft Office and knowledge of AUTOCAD
• Independent, diligent and highly motivated with excellent team spirit
• Willing to work overtime including weekends and public holidays when necessary

Interested applicants please email your detail CV including your qualifications, working experience, current and expected salary to [email protected]

Key Responsibilities:

• Configure, and manage Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS) to maintain a secure and efficient network infrastructure.
• Implement and maintain Palo Alto and Fortinet Fortigate Firewalls for network security and access control.
• Administer Alcatel Lucent Wireless Controllers to ensure a secure and robust wireless network environment.
• Utilize SolarWinds NPM (Network Performance Monitor) and NCM (Network Configuration Manager) for network monitoring and configuration management.
• Manage and maintain ClearPass Policy Manager for network access control and policy enforcement.

Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or related field.
• 3+ years of experience in network security engineering.
• Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).
• Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.
• Hands-on experience with Alcatel Lucent Wireless Controllers.
• Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.
• Proficient in ClearPass Policy Manager for network access control and policy enforcement.
• Knowledge of network protocols, security architectures, and best practices.
• Strong analytical and problem-solving skills with attention to detail.
• Excellent communication and teamwork abilities.

Preferred Skills:

• Experience with other firewall solutions beyond Palo Alto and Fortinet, such as Check Point or Cisco ASA.
• Proficiency in network encryption protocols and VPN technologies.
• Understanding of network segmentation and micro-segmentation principles.
• Knowledge of intrusion detection/prevention systems (IDS/IPS).
• This role demands a proactive individual with a strong technical background in network security. If you possess these skills and are looking for a challenging opportunity in network security engineering, we encourage you to apply and become a valuable part of our dedicated team(S).

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

The job comes under NPI Operations and supports Product & Test Engineers in test development, product qualification & manufacturing release. Additionally, the job supports production & planning teams to make use of spare capacity for revenue attainment purpose. The scope covers managing Marvell testers, handlers, probers & hardware with focus towards operational readiness and continuous improvement.

What You Can Expect

In this (hybrid/remote/in-office) role in LOCATION, you’ll build transistor level circuits from scratch or be given existing blocks to improve or port. Using a variety of CAD tools, but primarily Cadence, you will build or improve your circuit, simulate different performance metrics and measure other parameters. You’ll do circuit analysis and if your circuit looks good, you’ll send it to layout for physical design. Once it’s created, you get it back, run simulations and tests, and continue iterating until the circuit performs precisely as you need it to. You’ll attend

weekly meetings with your team to discuss your projects at a high level. If any issues arise, the team may take a more focused look at the problem to work out a solution. You’ll also attend meetings with senior designers and managers to review your work at a detailed level. On this team, you’ll have the opportunity to see your designs go from an idea all the way through production and into use by other groups at Marvell.

What We're Looking For

To be successful in this role you must:

- Have completed a Bachelor’s Degree in Electrical Engineering and have 1-3 years of related professional

experience OR a Master’s Degree and/or PhD in Electrical Engineering.

- Your education must show further specialization into Analog Design.

- You must be willing to learn additional aspects of Analog Design from your peers and be willing to share your

knowledge with others as well.

This team collaborates a great deal.

- You must understand the fundamental theory behind circuit design.

- You must have some experience with CAD tools from school. If your school allowed you to use Cadence also,

that’s helpful but not required. You can learn that on the job.

Additional Compensation and Benefit Elements

With competitive compensation and great benefits, you will enjoy our workstyle within an environment of shared collaboration, transparency, and inclusivity. We’re dedicated to giving our people the tools and resources they need to succeed in doing work that matters, and to grow and develop with us. For additional information on what it’s like to work at Marvell, visit our Careers page.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

MUST HAVE MINIMUM BAHELOR DEGREE, HARD WORKING, EASY TO UNDERSTAND TASK AND IMPLEMENT REQUIRED KNOWLEDGE, EXECUTE ALL ADMNISTRATIVE WORK, MUST HAVE ACCOUNTS KNOWLEDGE AND APPLY TO ACCOUNTS WORK, BOOK KEEPING AND RECORD MAINTENANCE, MANAGE WORKERS PAY ROLL, AND MUST MINIMUM 2 YEARS EXPERIENCE ADDED ADVANTAGE FOR RECURITMENT CONSIDERATION.IF REQUIRE LATE HOUR WORK FOR SUBMISSION NEED TO CO OPERATE WITH HIGHER OFFICERS

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.



Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following:

a. Design of automation or semiconductor equipment

b. High precision machine design

c. Design of High-Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Purpose and Scope

Plan and supervise the maintenance team in the execution of assigned plant maintenance activities within schedule and cost, in compliance with regulatory and company's standards and requirements, in particular company's safety standards, as well as to develop staff capabilities using appropriate capability interventions and on-the-job training at Sakra Cogen, SUT and Water Plants.

Key Roles and Responsibilities

• Plan and supervise the team in the execution of preventive, corrective maintenance programs within schedule and cost, and in compliance with companies and regulatory standards and requirements, and meeting customer’s expectations.
• Good knowledge and experience of I&C equipment maintenance and troubleshooting of Control Systems like DCS, PLC and SCADA.
• Able to understand and troubleshooting on Logic Diagrams like Function Blocks and Ladder Logics.
• Knowledgeable in Field Instruments selection, configuration and calibration such as transmitters & gauges, switches etc.
• Knowledgeable in maintenance and troubleshooting of Analytical instruments like pH, Conductivity, Sodium, Silica, TOC, Oxygen and CEMS Analyzers.
• Knowledgeable on Cyber Security OT systems and support Plant Cyber Security implementation and audits.
• Troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure.
• Develop Risk Assessment and mitigation measures for every Maintenance job in the plant before executing maintenance activities.
• Establish and maintain a proper documentation system to archive all jobs internally and with customers for sharing and audit purposes.
• Engage stakeholders to resolve technical problems that arises in the plant.
• Assist the section head to identify, plan & review the training needs of the section.
• Assist the section head to review and identify spare requirements classifying under Strategic or Inventory spare.
• Assist the section head to develop the section's Maintenance budget.
• Prepare daily updates on Maintenance activities for the day to all stakeholders (operations)
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

Major Challenges

• Lean resources In Maintenance department.
• Identify root cause of issues, implement the solution and ensure no recurrence of the issues.
• Timely resolution of technical issues to recover plant and return it to commercial operations.
• Working long hours beyond office hour and weekends if necessary.

Key Decisions & Dimensions

• Routine maintenance and PM jobs.
• Scheduling and optimizing manpower both staff and contractors.
• Analytical skills and problem solving.
• Good communication and reporting.
• Creative and critical thinking.

Qualifications & Experience

• Degree or Diploma in Electrical/Electronic/Instrumentation Engineering
• Preferably minimum 3-4 years of experience in relevant Maintenance fields in a Power Plant or Petrochemical Industry

Preferred Skills & Characteristics

• Safety conscious
• Ability to organize
• Leadership skills
• Communication skills
• Ability to work in a team
• Willingness to do field work
• Basic PC skills like Excel & Words

Purpose:

To contribute as part of a process safety team on a proposal / project, in collaboration with different departments and process safety section, to manage Major Accident Hazards (MAHs) and prevent and mitigate Major Accident Events (MAEs) throughout the lifecycle of the facility, specializing in human factors.

Responsibilities

• Support the development and review of HSSE Design Philosophy, and other process safety-related philosophies including Human Factors related matters.
• Provide guidance to the proposal / project for compliance to company standards, client and regulatory requirements of safety-related systems.
• Support production of HFE plans; Carry out HFE activities and reviews.
• Produce HFE technical deliverables. Support, identify, track and resolve HFE issues in compliance to company standards, client and regulatory requirements.
• Support the development of scope of work of safety studies including human factor issues on the risk management. Perform safety consultant technical bid evaluation, participate in workshops, plan, review and deliver safety studies / deliverables. Deliver complete, correct, and on-time safety studies and deliverables to the proposal / project, demonstrating risks are As Low As Reasonably Practicable (ALARP).
• Organise, attend and contribute to Bow-Ties workshops, identify and define SCEs, including safety critical tasks, communicate performance standards requirements, review SCE design and safety critical procedures, manage tracking and review of EPCI assurance tasks, as instructed by the Principal Engineer, to ensure that safety critical elements are designed, procured, constructed, commissioned, and installed or prepared in accordance with performance standards for the prevention and mitigation of MAEs.
• Support the coordination and management of risk and human factors consultant/subcontractor to ensure the risk of the facility is properly assessed in accordance with the scope of work and methodology, in a timely manner and on budget.
• Collect risk assessment and human factors activities and studies input data, review technical deliverables from consultant, prepare deliverables, review other discipline deliverables, and collaborate with other disciplines and departments, as instructed by the Principal Engineer or assigned engineer.
• Issue accurate deliverables, minimizing mistakes and maximizing efficiency. Minimise / manage deviations from company standards, client and regulatory requirements of safety-related systems.
• Contribute to the achievement of Project / Engineering Performance Goals defined for the year / project
• Collaborate with the proposal / project team, consistently check deliverables for compliance, attend / support audits and resolve non-conformities to deliver a regulatory compliant installation. Minimise non-conformities and delays to first oil.
• Communicate professionally with the client, provide responses to client comments, as instructed by the Principal Engineer, such that the client is satisfied that hazards are managed appropriately.
• Collaborate with the project team to ensure that changes are managed in accordance with the Management of Change Procedure and their impact on risk are properly evaluated.
• Identify and communicate lessons learnt for improved management of MAHs and project execution.
• Ensure technical competencies are met.
• Comply with MODEC Group Policy, Code of Business Conduct and Ethics at all times.

Requirements

• Degree in HF/ergonomics/Applied Psychology or other relevant degree, or equivalent occupational qualification
• Min 1 year of relevant working experience in application of HF within high-hazard industries, or minimum 5 years of relevant working experience for a diploma holder.
• Human Factor mapping skills are preferable.

Interested applicants, please send your resume to: [email protected]

EA Personnel R1109773

Agency no 07C3676