The Assistant Chief Engineer is responsible to assist the Chief Engineer in the operation and maintenance of the building, to ensure a high standard of upkeep and maintenance, to the satisfaction of the building owner and guests / tenants.

Responsibilities:

• To assist the Chief Engineer to implement the execution of preventive maintenance and repair schedules of all machinery, equipment and facilities and see to the proper execution by employee staff or external agencies or contractors.
• To assist the Chief Engineer to prepare the duty roster of maintenance staff.
• To conduct daily briefing of staff and assign duties to staff to carry out the necessary building operation and engineering works.
• To assist the Chief Engineer in the execution of administrative duties such as inventory management, record keeping of engineering work / repair, etc.
• To assist the Chief Engineer to ensure good housekeeping standard of the engineering workshop and that all safety procedures and rules are adhered to.
• To assist the Chief Engineer to obtain quotations for all the necessary works by external agencies / contractors and for all necessary purchases from suppliers.
• To contribute towards cost management of the department and ensure that there are no wastage, negligence or dishonesty.
• To assist Chief Engineer in profits and losses costing and planning.
• To ensure that the staff in the department provides a high standard of engineering services which meets the expectations of the building owner / tenants / guests / shoppers
• In conjunction with the Chief Engineer, to ensure that that the maintenance staffs are adequately deployed and that they are properly trained to discharge their roles.
• Mentor, coach & orientate new as well as existing staff in their roles & responsibilities towards the department goals
• In conjunction with the Chief Engineer, to assist the maintenance staff retention and to take appropriate measure in furtherance of staff stability.
• To ensure that effective fire safety, work place safety practices and enforcement of local Health & Safety regulations are met.
• Ensure to assist department to comply all authorities' requirement
• To ensure that Hotel management is satisfied with the quality of services rendered by the Engineering department.
• To ensure that the Hotels guests receive an adequate level of engineering services that satisfies their concerns and needs.

Job Requirements:

• Candidate must possess a Polytechnic Diploma in Electrical, Mechanical or Building Services or equivalent. Preferably with Engineering Degree.
• Preferably with minimum 3 years or more of experience in Engineering management in similar capacity
• Able to deal with suppliers / contractors / government bodies
• Able to manage various projects at any point of time.
• Exposure to purchasing, cost control beneficial
• Able to use Microsoft Word, Excel of computer for preparing reports
• Sound Knowledge of Hotel Engineering and Management
• Sound knowledge in Mechanical / Electrical / Building Engineering
• Possess skills in maintaining, troubleshooting and repairing of building equipment
• Good communication skills (verbal and written), able to resolve any conflicts.
• Good coaching skill, ability to lead the junior maintenance staff.
• Willingness to learn and work as a team member
• Possess high level of integrity and respect for others
• Able to withstand huge pressure and stress towards work
• Outgoing personality
• Responsible to his work, hardworking, good initiative with cost saving in mind
• Self-confident, self esteem
• Good problem solving skills necessary
• Able to put in long hours when required and 24 hours standby for any technical problem occurring
• No criminal record
• No external commitment that clash with work

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

We are looking for Cloud Security Lead to pioneer in developing, implementing, and managing cloud security solutions to safeguard the organization's data and infrastructure. This role entails collaborating with cross-functional teams to ensure secure cloud environments while addressing emerging security challenges.

Details

• Working location: Central
• Working hour: 9am to 6pm / 10am to 7pm (Flexible arrangement), hybrid work arrangement
• Salary package: Up to 13K + AWS + Attractive Bonus Scheme
• Others benefits: Group insurance, above industries standard leave benefits, good employee welfare, annual dinners, cruise events, overseas trip, learning & development etc.

Responsibilities:

• Develop and execute cloud security strategies and roadmaps, provide leadership and direction to the cloud security team, aligning efforts with organizational objectives.
• Promote security best practices and foster a culture of security awareness across the organization.
• Design and deploy secure cloud architectures and solutions, evaluate and recommend security tools and technologies to enhance cloud security.
• Develop and manage IAM strategies to ensure secure and compliant access to cloud resources.
• Implement and enforce IAM policies, procedures, and controls for managing identities, roles, and permissions.
• Establish, enforce, and monitor cloud security policies and procedures.
• Ensure adherence to industry standards, regulations, and best practices (e.g., GDPR, HIPAA, NIST).
• Conduct regular security audits and risk assessments to identify and mitigate potential risks.
• Lead incident response efforts for cloud security incidents.
• Conduct root cause analysis and implement corrective actions to prevent future incidents.
• Partner with DevOps, IT, and development teams to integrate security into all stages of the software development lifecycle (SDLC).
• Collaborate with external vendors and partners to ensure robust security solutions.
• Regularly analyze security logs, alerts, and reports to detect and respond to threats.
• Prepare and present security metrics and reports to senior management.

Requirements

• Min 7years of experience in cloud security, with expertise in AWS, Azure, or Google Cloud Platform and min 2years in lead position.
• Strong understanding of cloud security & cloud infrastructure architectures, frameworks, and best practices.
• Relevant certifications such as OSCP, CISSP, CCSP, or AWS Certified Security – Specialty is a plus point.
• Knowledge of container security, Kubernetes, and microservices architecture.
• Hands-on experience with cloud security tools and services (e.g., AWS Security Hub, Azure Security Center).
• Proficient in security technologies such as IAM, encryption, SIEM, IDS/IPS, and vulnerability management.
• Familiarity with regulatory and compliance frameworks (e.g., ISO 27001, SOC 2).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

• Low Yong Wei (Wyman) - R1550983
• ScienTec Consulting Pte Ltd - 11C5781

Job Description

• Day-to-day supervision on site
• Coordination and monitoring of progress amongst various subcontracting works
• Proficiency in CAD software, checking drawing discrepancies, coordinating with client’s representatives, consultants and sub-contractors on technical matters
• Attend meetings, inspections, liaison with QP's, government body and clients
• Responsible for the upkeep / submission of reports including safety and other compliance matters

Job requirement

• Prior experience with landed property construction in Singapore
• Experienced with Structural and architectural works for Building Construction
• Degree in Civil Engineering with relevant safety and construction certificate
• Kindly include project type in your resume

Job Description & Requirements

We are looking for a Senior/Staff Analog Layout Engineer to contribute to the development of High-Speed Connectivity, Broadband Analog and Computing/Storage-Memory Data-Transport products (including functional blocks such as high-speed digital, multi-GHz ADC/DAC, PLL/DLL serial and parallel I/O, and clock generation/distribution for custom ICs). The candidate must have a proven record of laying out high-performance analog circuits in state-of-the-art CMOS process technologies, successfully performed top-level integrations, and placed products into volume production multiple times.

Requirements

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and at least 2-5+ years of related professional experience.
• Master’s degree in Computer Science, Electrical Engineering or related fields with 3+ professional experience.
• Deep understanding of layout methodology from initial chip planning to tape-out.
• Deep understanding parasitic optimizing in layout
• Experiences in advanced process technology and Fin-FET is preferable.
• Have a high level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc. reports.
• Have a high-level proficiency/knowledge of Synopsys or CADENCE layout entry tools.
• Programming skills in any of the following are a plus: Skill or Ample or Perl, etc.
• Strong technical and analytical background, problem solving skills, etc.
• Fluent in English

To apply, please submit your application via this link: Marvell Careers

Job Responsibilities:

• 6 days work week
• Has to be physically fit
• Able to carry loads that weighs at least 15kg
• Has to work under sun/rain and continuous loading of heavy goods
• Able to use cutting tools and machinery well
• Plus point if able to operate a forklift
• Need to perform ad hoc duties as arranged

manages the progress of a construction project by planning, organizing, and monitoring the work

• Planning and organizing plan and allocate work, and manage logistics to ensure that materials, equipment, and labor requests are completed on time and within budget
• Reviewing and approvingReview and approve designs, drawings, specifications, and materials to ensure they meet standards
• Directing activitiesDirect the activities of workers, subcontractors, and contractors on the site
• Inspecting and evaluatingInspect and evaluate the quality and safety of the work
• CommunicatingCommunicate with project stakeholders, such as architects, clients, and contractors, to ensure that everyone is aligned
• Identifying and mitigating risksIdentify and mitigate any risks or issues that arise during the project
• Implementing standards implement standards for quality, productivity, production, and customer service
• Resolving problems resolve problems and identify improvements to the construction management system

The Job:

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment
• Designing and analysing inspection and testing processes, mechanisms, and equipment
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks
• Undertaking root cause analysis of incidents requiring corrective action
• Ensure that corrective measures and deviation meet acceptable reliability standards
• Other ad hoc duties assigned

Requirements

• API Q1 and Q2 certifications
• Internal audit certification

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

This role is required to managed and support 1-Net's IT Services business, including Cloud Services, Managed Services, DC services, and Business Continuity Management Services.

Responsibilities

• Providing 2nd/3rd level support to Network Services
• Problem resolution in customer network issues
• Plan, implement, review and project manage network infrastructure projects and operations
• Test, evaluate and recommend new networking products for customers
• Review and continuously enhance existing network services
• Improve network performance; optimize network usage and bandwidth usage and secure the core network
• Optimize routing policies and capacity management to ensure minimal network latencies and outages
• Secure network with relevant security policies
• Responsive to solve network issues, on standby 24x7
• Assist L1/L2 Engineers to handle customers' issues directly
• Recommend suitable and relevant solutions to solve customers' issues
• Provide maintenance support for all network infrastructure
• Provide monthly network infrastructure performance review report and capacity planning recommendations
• Ensure efficiency and effectiveness of the implemented solutions in meeting user's requirements and work processes and procedures.
• Ensure timeliness & quality of project delivery.
• Structured cabling system implementation and cross connect provisioning.

• In depth practical experience in LAN/WAN implementation which include router & switches setup and configuration.
• Knowledge and experience with networking protocols, including BGP, VXLAN EVPN, OSPF, IOX-XR, NX-OS
• Structured Network Infrastructure for Layer 2 & 3 support.
• Certification in CCNA, CCNP is highly preferred
• Shift work required

DUTIES AND RESPONSIBILITIES:-

1. To be responsible for execution, planning, coordination, monitoring and commissioning projects assigned by the Project Manager or Team Leader.
2. To supervise and take responsibility of Installation Team.
3. To co-ordinate and liaison between departments, the daily company activities relating to project implementation, design, planning, material procurement, delivery, installation, testing & commissioning and after sales service.
4. To take measurements, check and verify all claims made by contractors undertaking the company’s work.
5. To prepare monthly progress claims, maintain up to date records of the claims and follow up on the payment certificate for the particular project assigned by the Project Manager.
6. To maintain up-to-date records and plans of all changes make on site and updating as built drawings for future submission of Operation & Maintenance Manual during project handing over.
7. To maintain up to date records of materials used on site and ensure site inventory is sufficient for continuity of works.
8. To liaise and discuss with consultants, main contractor and sub contractors concerning project’s technical and coordination issues.
9. To attend site meetings relating to the project assigned and prepare progress reports as and when required by the management or the client.
10. To issue and maintain up to date correspondence relating to the project assigned by the Project Manager.
11. To ensure the safety and health pratice, including hygiene and cleanliness matters, are being carried out and implemented at all time at the project site.
12. Any duties deemed necessary by The Management.

Requirements: -

• Recognized Degree / Diploma in Mechanical / Electrical Engineering.
• Min 2 years working experience in construction industry with min 1 year in Singapore
• Able to multi-task, Independent, self-discipline, willing to learn
• Able to interact with people of all levels and teamwork
• Knowledge in AutoCAD, Microsoft Project, Adobe Acrobat

We are seeking highly skilled Commissioning, Qualification, and Validation (CQV) Engineers to provide risk-based CQV services for pharmaceutical and biopharmaceutical clients. This role offers opportunities to work across various areas, including process equipment, CIP/SIP (Clean-In-Place/Sterilize-In-Place), and process manufacturing systems, with a focus on maintaining compliance with regulatory standards.

Key Focus Areas:

1. CQV for Facilities, HVAC, and Equipment
2. CQV for Cleaning Validation

Responsibilities:

• Develop risk assessments, system impact assessments, protocols, and reports to support qualification and validation requirements, in line with regulatory standards and industry best practices.
• Create validation protocols using a science and risk-based approach to ensure compliance with regulatory requirements.
• Review, analyze, interpret, and summarize system and process performance data from executed activities for reporting and presentations to management.
• Investigate deviations, prepare detailed investigation reports, and create summary reports to ensure clear documentation of issues and their resolutions.
• Apply good judgment within defined practices and policies to select appropriate methods and techniques for obtaining solutions.
• Author or support the creation of test scripts for commissioning and qualification (CQ) of facilities, HVAC systems, manufacturing or analytical equipment.
• Conduct cleaning validation studies to ensure processes meet stringent regulatory requirements.
• Author or execute test scripts for DeltaV batch recipe testing, ensuring seamless integration with production processes.
• Draft DeltaV batch recipes, ensuring alignment with manufacturing specifications and process requirements.

Requirements:

• Experience with pharmaceutical and biopharmaceutical processes, including commissioning, qualification, and validation.
• Knowledge of DeltaV batch processes and recipe creation/testing is highly desirable.
• Proven expertise in facilities, HVAC, equipment, or cleaning validation is required for the respective roles.
• Strong analytical and problem-solving skills with a good understanding of industry regulations and standards.
• Experience with risk-based validation approaches and developing protocols in compliance with regulatory requirements.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Job Description & Requirements

The Cybersecurity Engineer is responsible for designing, implementing, and maintaining security infrastructure to protect the organization’s IT systems and networks. This role involves analyzing, preventing, and mitigating security risks, conducting vulnerability assessments, and ensuring the overall security posture of the organization. The Cybersecurity Engineer will work closely with other IT teams to integrate security measures into the infrastructure, identify threats, and respond to incidents.

Key Responsibilities:

Security Infrastructure Design & Implementation:

• Design and implement secure network architectures, systems, and services.
• Build and configure security tools, such as firewalls, IDS/IPS, VPNs, endpoint protection, and SIEM systems.
• Integrate security solutions and ensure they are aligned with the organization's goals and policies.

Vulnerability Management:

• Conduct vulnerability assessments, penetration tests, and security audits to identify potential weaknesses in systems.
• Perform remediation activities by applying patches, hardening systems, and working with development teams to address security vulnerabilities.

Incident Response & Management:

• Respond to and investigate security incidents (e.g., data breaches, malware, DDoS attacks) to contain and mitigate damage.
• Collaborate with the incident response team to provide forensic analysis, determine the cause of incidents, and develop solutions to prevent recurrence.

Security Monitoring & Threat Intelligence:

• Continuously monitor and analyze security logs, alerts, and data from various security tools to detect and respond to potential threats.
• Leverage threat intelligence feeds and analysis to stay updated on emerging security threats and trends.
• Implement proactive security measures, including vulnerability scanning and intrusion detection.

Policy Development & Compliance:

• Develop, implement, and enforce security policies, procedures, and best practices across the organization.
• Ensure compliance with relevant regulatory standards, including IM8, CCoP 2.0, and other industry-specific frameworks.
• Conduct regular security assessments and audits to ensure adherence to security policies and standards.

Security Tools & Automation:

• Manage and optimize security tools such as SIEM, antivirus/anti-malware, firewalls, encryption, and endpoint protection systems.
• Automate repetitive security tasks and processes to increase efficiency and reduce manual intervention.

Collaboration & Training:

• Work closely with development, operations, and network teams to implement security into the SDLC (Software Development Lifecycle) and IT operations.
• Provide cybersecurity awareness training and guidance to employees to promote safe practices across the organization.

Documentation & Reporting:

• Maintain detailed documentation for all security systems, incidents, and actions taken.
• Generate regular reports on the status of the organization’s security posture, incidents, and risk assessments for management.

Qualifications & Requirements:

• Qualifications: Bachelor's degree in Cybersecurity, IT, Computer Science, or equivalent experience.
• Experience: Minimum of 2 years in cybersecurity or security engineering, with expertise in designing, implementing, and managing security solutions (e.g., firewalls, VPNs, IDS/IPS, endpoint protection).
• Technical Skills: Proficiency in vulnerability management, penetration testing, and security tools (SIEM, IDS/IPS, antivirus).
• Strong understanding of network protocols (TCP/IP), firewalls, VPNs, proxies, and related technologies.
  Familiarity with compliance standards (e.g., IM8, CCoP 2.0, NIST).
  Scripting expertise (Python, PowerShell, or Bash) for task automation and incident response.
  Hands-on experience with penetration testing tools (e.g., Kali Linux, Metasploit, Burp Suite, Nmap).

• Certifications (preferred): Certified Ethical Hacker (CEH), CompTIA Security+, or CySA+.
• Soft Skills: Strong analytical, troubleshooting, and communication skills (both written and verbal).
• Additional Knowledge: Security operations, incident response, and disaster recovery processes.

Shortlisted candidate will be notifed.

• Responsible for Equipment Uptime, Productivity and CIP.
• Work in a cleanroom environment for long hours.
• In-charge of PM planning, Equipment Maintenance, and Parts Management.
• Co-work with Engineer to resolve equipment/line issues.
• To improve and enhance machine performance and upgrade machine capability.
• Perform any other duties as assigned.

Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Electrical / Electronic / Mechanical), or equivalent.
• Proficiency in Microsoft Office.
• Ability to work independently as well as in a team.
• At least 2 years of relevant working experience in manufacturing environment.
• Fresh graduates are also encouraged to apply.

· Ensure thorough understanding of project terms and requirements.

· Review detailed drawings, and provide technical advice on practical design and construction.

· Prepare, schedule, coordinate and monitor the assigned projects.

· Prepare, update and maintain document summary or the necessary documents for projects.

· Prepare and submit the required engineering reports, documents, and drawings to the relevant authorities for approval.

· Update, manage and compile schedules of assigned projects with accurate data and report to the manager.

· Interact with clients to interpret their needs and requirements.

· Cooperate and communicate effectively with the project participants to provide assistance and support, to meet delivery timeline, optimize cost efficiency and meet customer specification.

· Feedback on workflow issues to manager in order to enhance efficiency and productivity.

· Manage all expected / unexpected change orders or deviations during project execution.

· Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

· Any other job as assigned by the Management from time to time.

Job Description & Responsibilities:

Reporting directly to the Managing Director, the Senior Project Engineer is responsible for the following:

• Lead and manage project supervisors to ensure the successful completion of projects.
• Ensure adherence to project budgets, schedules, and scope of work, while deploying appropriate staff resources.
• Review and assess project drawings, plans, specifications, and other relevant documents.
• Identify and troubleshoot issues arising during project execution and implement timely resolutions.
• Conduct and actively participate in weekly site meetings to monitor project progress.
• Collaborate with the Safety Officer to ensure compliance with quality standards and health & safety regulations.
• Monitor site staff to ensure strict adherence to all safety regulations.
• Prepare and submit project reports in a timely manner.
• Develop project drawings, including as-built drawings and shop drawings, as required.
• Perform any other tasks as assigned by the Managing Director.

Requirements:

• A minimum of a Diploma or Degree in Civil Engineering.
• Proficiency in Microsoft Excel.
• Ability to work 6 days a week with flexibility to work long hours when necessary.
• Possession of a personal vehicle is advantageous.
• 3-5 years of relevant working experience in construction or civil engineering projects, preferably in landed housing or fit-out jobs for shops.
• Certification in BCSS (Building Construction Supervisor Safety) or higher safety certification.
• Proficiency in CAD drawing.

Job Description:

• Collaborate with project managers, clients, and development teams to understand user needs, business goals, and design requirements.
• Create user flows, wireframes, prototypes, and high-fidelity designs for websites, mobile apps, and posters.
• Present design concepts to internal teams, stakeholders, and management.
• Identify user pain points and propose research initiatives, including usability testing, surveys, and interviews, to inform design decisions.
• Work closely with cross-functional teams to ensure designs meet business objectives and user needs.
• Ensure designs align with the design system and brand guidelines.
• Collaborate with frontend developers to ensure accurate implementation and participate in front-end development (training provided).

Requirements:

• Portfolio demonstrating visual design, user-centered thinking, research, and analytical skills.
• Proficiency in design tools like Figma or similar. Experience in requirement gathering through workshops, interviews, and research.
• Knowledge of user research methodologies and conducting user testing. Ability to communicate ideas through storytelling, storyboards, mood boards, flowcharts, and presentations.
• Strong verbal, written, and visual communication skills.
• Detail-oriented and ensures designs align with design systems.
• Ability to manage multiple projects in a fast-paced environment.
• Business acumen and understanding of objectives.
• Familiarity with Agile/Scrum, project management, and front-end development is a plus.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Responsibilities:

• Drive sales through outbound calls, offering alternative products for parts and addressing client needs.
• Act as the primary liaison between clients, sales channels, and internal teams to ensure seamless communication and service delivery.
• Build strong client relationships, profile target accounts, and gather market insights to identify growth opportunities.
• Negotiate contract terms, oversee project execution, and ensure alignment with client objectives.
• Conduct market research, manage partnerships, and implement processes to support business development.
• Inform the product, management, and technical team on various requirements within the range of product/system including and not restricted to competitor activity, market demands, and requirement and any potential installation changes as issued by end users.
• Gather and communicate market trend and strategies in the territory.
• Liaise with sales personnel and businesses in other regions as and when required.

Requirements:

• Bachelor's degree preferably engineering; with specialization in Sales and Marketing or equivalent experience within a similar role.
• Minimum of 5 years of experience in sales management within the electrical industry, with a focus on Electrical Wiring Devices preferred.
• Familiarity with the Asian market dynamics and customer preferences in the electrical sector.
• Experience in Structured Cabling sales is advantageous.
• Preference for LEW certification.

Location:

• Ang Mo Kio

Key Responsibilities

• Conduct regular inspections and maintenance of lifeboats, davits, and related safety systems in accordance with SOLAS and IMO standards.
  Perform load testing, release gear inspections, and condition assessments.
  
• Diagnose and repair faults in mechanical, hydraulic, and electrical systems.
  Ensure all repairs meet quality standards and comply with regulatory requirements.
  
• Prepare inspection and maintenance reports for submission to classification societies or flag authorities.
  Maintain accurate records of completed work, including parts and labor used.
  
• Provide technical support and advice to clients regarding lifeboat safety and equipment compliance.
  Offer guidance on preventative maintenance programs.
  
• Stay updated with international maritime safety regulations and standards.
  Ensure work is performed in a safe manner, following company and industry safety protocols.
  

Qualifications

• Diploma or degree in Marine Engineering, Mechanical Engineering, or a related field.
• Certification in lifeboat inspection and servicing (e.g., SOLAS or manufacturer-specific training).
• Proven experience in lifeboat maintenance, repair, and servicing (3+ years preferred).
• Strong knowledge of maritime safety regulations, including SOLAS, IMO, and LSA Code requirements.
• Hands-on experience with hydraulic, electrical, and mechanical systems.

Rapsodo Inc. is a sports technology and analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping golfers of all abilities, including PGA professionals, to optimize their launch conditions, to allowing MLB pitchers to increase the efficiency on their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1,000 NCAA athletic departments.

We are seeking a highly skilled and experienced Radar System Engineer to lead the design, development, and validation of advanced radar systems. This role is critical in shaping our radar solutions by architecting cutting-edge systems, developing robust signal processing algorithms, and ensuring seamless integration with RF front-end components. You will play a pivotal role in optimizing system performance, conducting real-world testing, and collaborating with cross-functional teams to drive innovation in radar technologies.

Key Responsibilities:

• Architect and design radar systems, ensuring performance meets technical and operational requirements.
• Develop and validate signal processing algorithms and radar architectures.
• Architect and validate RF front-end systems, ensuring seamless integration with radar systems.
• Conduct testing, debugging, and validation of radar solutions in real-world environments.
• Collaborate with cross-functional teams on system integration, performance optimization, and troubleshooting.
• Perform circuit design and modifications to improve overall radar performance.

Skills & Qualifications

• Master’s degree in Electrical Engineering, RF Engineering, or a related field.
• Strong experience in radar system design, and signal processing.
• Proficiency with radar architecture, including system testing and validation.
• Solid understanding of circuit design principles.
• Ability to work independently and collaborate in cross-functional and diverse teams.
• Strong problem-solving skills and attention to detail.

Preferred Experience:

• Familiarity with industry-standard RF design tools and testing equipment.
• Experience in radar system performance evaluation and optimization.
• Knowledge of various radar technologies and applications.
• Having hands on RF design and validation experience in 24, 60 or 77 GHz is preferred.

If you are excited about the prospect of contributing to a dynamic, innovative, and driven environment while also being able to work independently, we invite you to submit your application.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcaJ5uvj

• Autonomy to make key decision for software engineering
• Engagement with senior business stakeholders

About the company

Our Client is one of the most established companies within their industry. They have a well-established presence of more than 15 years with a global footprint of more than 5 countries. With aggressive plan in investing in IT, they are now looking hire their Lead Software Engineer / Software Engineering Lead - Java. NodeJS & Python to be based here in Singapore.

About the job

• Engage in all stages of the Software Development Life Cycle including Design, Development, Integration, Testing, Deployment, Maintenance, and Customer Support for intricate systems.
• Maintain high quality and delivery standards, consistently delivering quality code within deadlines.
• Act as the primary point of contact and on-site support for software-related issues
• Implement best engineering practices such as code reviews, secure programming, unit testing, and continuous improvement initiatives.
• Embrace an "Automation first" mindset, aiming to minimize manual tasks, particularly in code analysis, testing, and deployment.
• Utilize suitable software development methodologies, languages, libraries, and techniques to optimize software engineering tasks.
• Demonstrate autonomy by proposing viable technical solutions through thorough research and deep understanding of the codebase.
• Estimate costs and delivery schedules for development efforts, ensuring accuracy and validation.
• Continuously enhance understanding of new technologies, programming languages, frameworks, and technical concepts relevant to the company's product portfolios.
• Proactively research industry trends and best practices, implementing them where applicable.

Skills and experience required

As a successful applicant, you will have at least 7 years of experience in Java. Exposure to Python programming for developing large-scale real-time, event-driven applications.

Exposure to NodeJS, JavaScript, AWS cloud and designing CI/CD pipelines using Jenkins will be of added advantage.

Whats on offer

This is an excellent opportunity to led IT transformation through software development.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcaJ5uvj (EA: 94C3609/ R1219669)

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Associate System Engineer / System Engineer (2 years contract renewable)

• 5 days, 8.30am- 5.50pm
• Salary: $2800- $3000 (AE), $3500 (System engineer) + Allowance
• Location: East, and clients site whenever required

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

About Mun Siong Engineering Limited

One of Singapore’s leading integrated service providers since 1969, Mun Siong Engineering Limited offers a range of mechanical and electrical & instrumentation services for oil & gas, petrochemical, energy, chemicals, and power industries. As a one-stop solution provider, the Mun Siong Group caters for engineering, procurement, fabrication, construction, maintenance of plants and equipment, and specialised products and service solutions.

Job Description

Electrical Instrument Engineers are responsible for designing, configuring, and overseeing automated systems and power distribution projects, focusing on enhancing productivity, reliability, safety, and optimization in industrial facilities, from warehouses to complex EPC contracts, while managing contractors and ensuring system stability.

Responsibilities

• Serve as a knowledge resource for instrumentation, control systems, and process automation.
• Develop and maintain project documentation, including P&IDs, Instrument Index, and I/O Lists, across all project phases.
• Prepare and review engineering calculations, specifications, and requisition packages for inquiry and purchase, ensuring compliance with client standards and project requirements.
• Provide technical direction for material selection, vendor compliance, and equipment specifications; perform technical bid evaluations and make purchase recommendations.
• Coordinate with process engineers, mechanical equipment vendors, and external workshare offices to ensure compliance with project requirements and schedules.
• Plan, design, and oversee the construction, installation, and maintenance of electrical and instrumentation systems, ensuring compliance with codes, standards, and safety requirements.
• Prepare technical and construction scope of work documents for instrumentation, control systems, and electrical systems.
• Conduct inspections, testing, and vendor data reviews to ensure specifications and operational standards are met.
• Utilize computer-assisted engineering and design software to perform tasks and develop deliverables.
• Develop TIC cost estimates, effort-hour estimates, and budgets for labor, materials, and construction costs.
• Oversee project execution, ensuring timely completion within budget while maintaining quality and safety standards.
• Investigate customer complaints and recommend corrective measures; conduct field surveys to identify and resolve system issues.
• Supervise and train project team members as necessary.
• Prepare technical reports, system studies, and budgets for new projects, capital programs, and major repairs

Requirements & Professional Skills

• Diploma/Degree in Electrical Engineering
• Able to read and understand circuit diagrams as well as to detect discrepancies for combined services
• Well-versed in all local and international codes and standards on the related field
• Good knowledge in building M&E services, with project site experience in fire protection and electrical systems for M&E specifications, installation and maintenance.
• Positive attitudes/Drive for result.
• Mature personality and able to work independently.
• Good interpersonal, management and decision-making skills.

Company Overview:
Our client is a well-established leader in the manufacturing sector, known for their advanced production capabilities and commitment to quality. With cutting-edge facilities and a focus on innovation, they provide excellent opportunities for career growth and professional development.

Role Overview:

This role involves overseeing and optimizing the manufacturing process for the outer layer build process. The ideal candidate will ensure production equipment operates efficiently, maintain product quality, and adhere to safety and operational standards.

Key Responsibilities:

• Inspect incoming products and conduct quality checks to ensure compliance with standards.
• Operate, monitor, and shut down manufacturing equipment as needed.
• Perform routine inspections of equipment and production processes, addressing any quality or operational issues promptly.
• Maintain accurate records by completing logs and updating system inputs.
• Use line monitoring tools to oversee system performance and progress.
• Replace materials and consumables, such as filters, when required.
• Conduct tool changes and adjustments for product type transitions.
• Properly store materials and maintain optimal inventory levels.
• Set and adjust operational parameters for maximum efficiency.
• Perform scheduled equipment maintenance based on the maintenance plan.
• Operate multiple machines simultaneously if necessary.
• Prepare and manage chemical solutions required for the equipment.

Requirements:

Educational and Professional Qualifications:

• High school diploma or equivalent qualification/experience required.
• Certification in hazardous material handling is a strong advantage.
• Certification in workplace safety and health is a plus.

Specialized Skills:

• Proficiency in computer operations, including data entry and editing using MS Office (especially Excel).
• Experience with production-related systems and information management.
• Knowledge of handling chemical solutions is preferred.

Core Competencies:

• Strong adherence to operational procedures and workplace safety standards.
• Effective communication skills, particularly in reporting issues to supervisors.

Work location: Jurong West

To apply online please use the 'apply' function, with your latest resume attached.

(EA: 94C3609/R1442042)

As a Principal Engineer, you will be responsible for leading the quality assurance of optical components and assemblies for ultrafast laser systems. This role involves developing and executing testing protocols, managing metrology systems, testing of advanced optical thin film coatings and materials. Collaborating with cross-functional teams to ensure the highest quality standards. The ideal candidate will drive continuous improvement initiatives, manage complex technical challenges and refining measurement techniques to enhance product reliability.

Key Responsibilities:

Quality Assurance & Inspection:

• Develop, implement, and maintain quality control processes for optical components and sub-systems.
• Establish and track quality metrics, conducting root cause analysis and corrective actions for defects.
• Analyze and document inspection results, identifying trends or recurring issues.
• Establish and maintain metrology records for quality aspects of optics with optical thin-film coating processes such as AR (anti-reflective), HR (high-reflective), and dichroic coatings.
• Validate coating uniformity, durability, and adherence to specifications through regular inspection and testing.
• Collaborate with L&O engineers to address defects such as pinholes, coating delamination, or uneven deposition.
• Support new product introductions (NPI) by validation optical performance and robustness.
• Provide feedback on optical component specifications and tolerances to ensure manufacturability and robustness.

Optical Testing and Metrology:

• Perform Interferometric testing (phase-shifting Fizeau) to evaluate surface flatness, wavefront errors and lens quality.
• Conduct spectral performance measurements, including transmission, reflectance and absorption using spectrophotometers and other optics metrology tools.
• Oversee surface quality inspections in a production environment, ensuring adherence to scratch-dig standards (MIL-PRF-13830B)
• Characterize laser beam quality (M2, spatial coherence, intensity profiles) using advance beam profiling techniques.
• Laser Induced Damage Threshold (LIDT) testing and optical density requirements.
• Operate and maintain TD GC-MS testing equipment -
• Conduct outgassing and contamination testing for optical components.
• Analyze VOC test results and recommend necessary improvements.
• Understanding of optical materials and optical thin film coating processes for their behavior in a laser system under various environmental conditions.
• Interpret test data to identify any deviations and work with optical thin film suppliers for corrective actions.

Educational Requirements:

• PhD or Master’s in Optical Engineering, Physics, Materials Science, or a related field.
• Minimum 8 years of experience in Optical metrology, Quality Engineering, or Laser manufacturing.
• Certification in Quality or Optical Engineering (e.g., CQE, CPO, or similar) are a plus.

Preferred Qualifications / Competencies:

• Knowledge of volatile organics management for lasers, semi-conductor, or hard disk drive environments and metrology for process controls.
• Experience with various analytical equipment such as TD-GCMS, Spectrophotometer, Interferometer.
• Working knowledge of optical thin film technologies and processes such as Ion Beam Sputtering and E-Beam with and without Ion Assist Deposition.
• Familiarity with statistical analysis techniques, such as Weibull Analysis and Gage R&R.
• Familiarity with the following areas: Process Validations (IQ, OQ, PQ), Failure Mode and Effect Analysis (FMEA), Structured Problem Solving (8D) and Corrective & Preventive Actions (CAPA)
• Competence in MATLAB, Python, and optical design tools.
• Ability to complete tasks with urgency and have excellent attention to detail and accuracy.
• Strong technical communication skills.
• Self-motivated, ability to identify potential problems or improvements and possess the initiative to take appropriate actions as necessary.