• Conducting maintenance service, commissioning of alarm systems
• Address to customer request on alarm and card access systems

Requirements:

• Basic Security certified
• At least 2 years of working experience
• Possess valid class 3 driving license

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Enhance equipment capacity and verify it while improving operational productivity.
• Establish planning parameters for short-term and strategic planning.
• Monitor and address near-term production bottlenecks.
• Create scheduling strategies for the shop floor to meet throughput goals.
• Collaborate with Production to control dispatch points for seamless production flow.

Requirements:

• Degree in Industrial Engineering or equivalent.
• Minimum 2 years of experience in relevant field.
• Strong understanding of manufacturing and logistics processes, systems, and manufacturing industry product costing.
• Proficient in Microsoft Office and SAP.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Optimize demand request among DRAM/NAND network fabs to maximize output and minimize opex
• Standardize and consolidate FE Materials Forecast Metrics performance and roll up for executive metrics' update.
• Improvement of efficiency of network metrics' consolidation through automation.
• Partner with sites closely to enable timely communication of fab deviation to plan.
• Forecast potential roadblocks in Warehouse inventory management and communicate with sites on mitigation plans.
• Govern FE Warehouse Operation ground rules, coordinate audits to ensure compliance and conformance to audit guidelines
• Collaborate with Site Warehouse team and Procurement team to improve and optimize inventory, efficiency, and cost.
• Govern materials planning forecast and deploy Best-Known-Methods (BKM)
• Monitor, identify and analyze material inventory forecast Performance-to-Plan gaps and work with sites to drive gap closure and improvement actions
• Manage, measure, and monitor projects to ensure deliverables and time frames are met.
• Facilitate deployment of projects to improve materials forecast accuracy, cost, output performance.
• Own and maintain the Global Inventory Metrics, Business processes and Reports.
• Promote and model the use of analytical and systematic thinking processes.
• Create an environment of motivation to foster global team member’s engagement to the fullest of their potential.
• Fluent in the basic concept of weekly wafer starts and wafer outs business process.
• Proficiency in data analytics tools (e.g. Python, SQL, Tableau) to perform detailed analysis and provide metrics visibility.
• Proven ability to make decisions, multi-task, and troubleshoot problems and address root causes.
• Proven ability to build consensus in cross-functional groups
• Experience in SAP system will be advantageous

Must have 15 years experience Diaphragm Wall, Removal of RC pile, Pored pile, See wall & H beam and installation of king post and Jet grouting.

Willing to work at site standard time and non standard time.

Overall D. Wall project planning, distributing resources, time management, risk management, creating benchmarks, managing the budget, managing staff, and managing relationships with key stakeholders.

Mobilize the machinery such as crane, grabber and cutter as per contract

Assemble the machinery and get the authorized examiner approval

Assist the LCDW to get the NCE and Utility layout drawing

Assist the Design and drafting team to get the drawing based on the site planning and constrains & submit the drawing to the MC/Consultant and do the follow up on the AE approval.

Prepare the project weekly and monthly rolling program in MICROSOFT PROJECT based on the hand over working place, site obstruction and constrains. Get the Project manager approval for rolling program and submit to main contractors

Follow up the program and ensure that program met up on site

After the completion diaphragm wall, follow up the top-down excavation and exanimate

Exposed diaphragm wall condition and ensure the soundness of the concrete

·Execution of following diaphragm wall rectification works if spotted any unsound conditions

Preparation of following diaphragm wall records Method statement, safe work procedure,risk assessment,lifting plan, Panel record,daily report, and Delay and obstruction recor Site daily, meeting minutes

· Report the site progress and other site planning related matter to daily coordination meeting & weekly sub-contractor meeting Maintain the site inventory records for steel plate, equipment's and machinery.

· Assist the QPs for inspections and clarify the technical matters - whenever required

· Maintain and update the all site records and assist the QS on the claim works

· Closely Follow up the cash follow together with project manager and QS and implement the actions whenever it downs

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Participate in full project life cycle from requirements gathering to project implementation, maintenance and support.
• Be responsible for program design, coding, testing and documentation.
• Develop secure, scalable and good quality application programs and API within allocated man days.
• Perform data migration, data transformation and scripting.
• Have a passion for delivering zero defect codes and be responsible for ensuring the codes meet the expected SLA.
• Participate in continuous integration activities and automation frameworks for testing and deployment.

The ideal candidate shall possess the following

· Diploma/Degree in Computer Science, IT or equivalent

· Good problem solving & communication skills.

· Good attitude and willingness to learn.

· Good knowledge in Java, JavaScript and SQL.

· Good knowledge in Angular and Struts framework.

Salary shall commensurate with experience and qualification.

URGENT HIRING FOR - Admin & Operations Executive

Salary SGD 2,200.00 - SGD 2,750.00 (Based on Experience)

5 Days work

Contact: [email protected] or [email protected]

Main Responsibilities include but not limited to:

- Manage accounts receivables (AR) and accounts payables (AP) functions

- Process and Perform Invoices, PO, Deliveries, Project formalities

- Perform data entries, prepare and assist in day-to-day operation in accounting

- Email correspondence with external stakeholders/ Vendors

- Work on Project Management cost

- Assist in month-end closing and reconciliation of daily, monthly and yearly transactions

- Undertake any ad-hoc duties including admin duties, as and when assigned

- Handle MOM processing

- Manager entire admin and operation work of the organization.

Requirements:

- Have relevant education in Finance/Accounting/Multimedia/IT

- The successful candidate should be proficient with computers and other standard office technology and is meticulous in carrying out work orders.

- In addition, he/she should be able to work under minimal supervision and have good communication skills

- Good Knowledge of MS Office and Email Communication

- Singaporeans or PR preferred

Zeecon Engineering Pte Ltd is a company providing Cabling Solutions to the corporate world. We specialize in laying cabling and a host of other related services as below

Cabling - Data, Fiber, Telephone and Electrical

CCTV Security System

Door Access Security System

UPS Installation

Data Centre IT Relocation

Rack Systems and Enclosures

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

The Role:

We invite experienced C++ Software Engineers to apply as Software Engineers with us. We value proactive problem-solvers with expertise in C++, who take ownership of their work and show dedication to ongoing learning and growth.

Candidates who are adept at solving complex issues, especially those related to low latency or multi-threaded, are highly regarded at Rapsodo.

Responsibilities:

This role would be expected to:

• Be open to new concepts and ideas, demonstrate professional curiosity, and driven to succeed with a strong sense of ownership as a problem solver.
• Possess strong organizational skills, attention to detail, resilience, and adaptability in a dynamic environment
• Collaborate closely with Rapsodo's internal teams to ensure seamless integration of middleware solutions.
• Support middleware integration tasks across various technology platforms to support the development and deployment of sports data analytics solutions.
• Engage with a diverse range of applications and technologies, contributing to the dynamic and challenging nature of the role.
• Provide Tier IV and higher support for any outstanding technical issues.

Requirements:

• Bachelor’s Degree in Computer Engineering or Computer Science-related discipline
• At least 2-4 years of work experience in a relevant role. Fresh graduates with relevant skills and project experience may be considered.
• Demonstrate expertise in modern C++ and multithreading concepts, along with fundamental knowledge of Linux and Python / Bash scripting.
• Basic understanding of computer vision principles and solid fundamental knowledge of OS / systems / networking.
• Strong problem-solving skills with the ability to troubleshoot the most challenging technical issues effectively.
• Demonstrate a self-starting attitude with a strong desire to learn and an action-oriented approach
• Excellent teamwork skills and the ability to work cross-functionally.
• A background in Team Sports will be an added advantage!

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• 5 Days
• 9am - 6pm
• $2800 - $3000 + Monthly Commissions + AWS [Gross can earn up to $5K]
• Bras Basah

Job Description:

• Maintaining existing sales accounts and upselling for new products
• Follow up with new customers for potential sales of new products
• Plan sales visits, customer calls daily
• Meet sales and profits targets as directed
• Proposed and follow up on sales lead, sales orders and deliveries
• Providing support to customer enquiries in technical information gathering
• Provide good after sales service to customers.

Requirements:

• Diploma or Degree preferably in Mechanical / Mechatronic / Electrical Engineering/Industrial Automation
• At least 1-2 years in mechanical/electrical components or related experience in sales/ application in industrial automation
• Proficient in Microsoft Office, Salesforce
• Good relationship with OEM (original equipment manufacturer), SI, EMS (electronics manufacturing services), End User would be an added advantage.

Interested applicants can send your resume to Whatsapp 83208165 (Jennifer) and allow our consultant to match with our clients.

We regret to inform that only shortlisted candidates will be notified! All applications will be handled with strict confidentially.

Jennifer Tay Swee Shan

Reg No: R22111564 | EA No: 21C0845

Recruit Now Singapore Pte Ltd

Requirements

• Degree in IT/Computer Science
• 3 years of relevant experience in IT Security/Cyber Security.
• Good Knowledge of Cyber Security Management, IT Compliance, and/or Risk Management.
• Familiar with ISO27001 and/or PCI Data Security Standards.
• Hands-on experience with Microsoft Azure Cloud Security technologies
• Familiar with modernized A.I and SecOps tools.
• Articulate, good documentation skills

Responsibilities:

• Deploy, configure, and optimize security policies and configurations, while actively conducting threat hunting to address potential cyber threats using tools like Microsoft Azure Sentinel, Microsoft Defender for Cloud, and 365 Defender.
• Configure security incident response workflows using Microsoft Azure Sentinel.
• Manage cloud resources according to the security posture outlined in the Microsoft Cloud Security benchmark.
• Operate and maintain the IT Security Protection System, collaborating with Maintenance Contractors to resolve technical and security issues through regular health checks.
• Investigate Events of Interest and security vulnerabilities, collaborating with relevant teams to address them promptly.
• Support both internal and external parties in managing and responding to Cyber Security Incidents.
• Ensure compliance with IT Security Policies by assessing the security posture of the organization's IT assets and recommending measures to mitigate security threats.
• Assist in both internal and external IT audits and coordinate with Risk Owners to address audit findings.
• Review and improve IT security policies, procedures, and documentation in alignment with industry standards and best practices.
• Organize and conduct Cyber Security Awareness Training sessions, including Cyber Security Exercises.
• Be available for immediate response to critical security alerts and incidents outside of regular office hours.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide. We offer field service repairs, inspections, overload load testing, dry-dock repair

supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Deck Machinery Service operations, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES
• etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Ship Electricians are welcome to apply.
• Min 5 years' experience in inspection, troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems.
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Sailing experience as Electrical Officer (E/O) on bulker vessels equipped with deck cranes will be an added advantage
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage

Work Experience

• 3 years of experience in desktop support, maintenance, and basic infrastructure/network troubleshooting.

• Knowledge of ITIL processes and practices.

• Basic understanding of infrastructure and network concepts, including TCP/IP, DNS, DHCP, and network protocols.

• Strong technical knowledge of desktop operating systems, applications, and hardware.

• Excellent problem-solving and troubleshooting skills.

• Strong communication and customer service skills.

• Ability to work independently as well as in a team environment.

• Flexibility to work outside of normal business hours, if required.

Education Requirement

• Relevant certifications such as CompTIA A+, Microsoft Certified Desktop Support Technician (MCDST), ITIL Foundation Certification, or basic networking certifications (e.g., CCNA) is a plus.

Work Location: Jurong Island & Pasir Panjang

Work Timing: Monday to Friday / 8:30 am to 5:30 pm

Job Description

• Supervise and manage construction works to meet project objectives.
• Collaborate closely with client representatives and consultants to ensure seamless communication and project alignment.
• Ensure the achievement of high-quality construction works.
• Adhere to safety and environmental regulations, fostering a culture of compliance within the project team.
• Collaborate with the manager to coordinate design works effectively.
• Propose suitable solutions to clients and their consultants, demonstrating problem-solving skills.
• Interpret drawings, specifications, and other owner's requirements related to design works.
• Provide technical expertise to resolve design-related challenges.

Requirements

• Educational Background Diploma or Degree in Civil Engineering or equivalent.
• Proficient in AutoCAD, would be a strong advantage for candidates experienced in its usage.
• Highly skilled in using Microsoft Office for efficient project documentation and communication.
• Positive attitude towards teamwork, with the ability to collaborate effectively with diverse stakeholders.
• Ability to thrive in a fast-paced environment, demonstrating flexibility and resilience.

CNC Milling and Turning Positions Available.

Permanent, Full-time position.

Roles and Responsibilities:

1. Strong in 2D and 3D CNC Programming use MASTERCAM.

2. Able to Operate CNC Milling and/ or Turning machines.

3. Understand Fanuc and / or Mitsubishi machine systems.

4. Review and Interpret Engineering Drawings to ensure fabricated components meet precision measurements.

5. Good knowledge of cutting tool application, fixture & jigs, part setting and machine setting in different sizes.

6. Maintain quality output and safety standards.

7. Able to handle any adhoc duties when required.

Prerequisites:

1. Minimum Diploma in Mechanical Engineering or Equivalent.

2. Preferred minimum 2 years of relevant working experience in Precision Manufacturing sector.

3. Able to operate both CNC Milling & Turning will be an advantage.

4. Able to commit to overtime.

Work Location: Pioneer, Singapore. (West side)

Working Hours: 5.5 days week (Monday to Friday: 8.30am to 5.30pm; Saturday: 8.30am to 12.30pm).

CNC编程加操作 - 数控铣床 和 数控车床 职位

要求：会独立2D3D编程(Mastercam), 要熟练操作CNC机器（法兰克系统，三菱系统），能看图纸设定机器，检查程序刀具 、完成产品加工。

工资：综合$3000~4500; 有13薪＋业绩花红/津贴等（面议）

工作地点：先驱 (Pioneer), 新加坡, 西部

工作时间：星期一至五8.30AM到5.30PM，星期六8.30AM 到 中午12.30PM。有加班费。

To provide technical support to Chinese-speaking end-users. Proficiency in Chinese Mandarin is a must.

*General Description*

• Provide first level technical support to end-users for desktop and laptop hardware, software basic infrastructure, and network issues.
• Diagnose and resolve desktops, laptops, printers, peripherals, basic

infrastructure, and network connectivity issues.

• Install, configure, and maintain desktop operating systems, applications, and network drivers.
• Perform preventive maintenance, upgrades, and software installations on desktops, laptops, and network devices.
• Follow ITIL processes for incident, problem, and change management.
• Assist with basic infrastructure and network troubleshooting, escalating complex issues to the appropriate teams.
• Maintain accurate and up-to-date records of all desktop, infrastructure, and networkrelated activities.
• Ensure compliance with IT policies and procedures.
• Assist with the management of the asset inventory for desktops, laptops, and network devices.
• Provide training and support to end-users on the use of desktops, laptops, and basic network connectivity.
• Any other task assigned by reporting manager or team lead.

*Work Experience Requirements*

• 3 years of experience in desktop support, maintenance, and basic infrastructure/network troubleshooting.
• Basic understanding of infrastructure and network concepts, including TCP/IP, DNS, DHCP, and network protocols.
• Strong technical knowledge of desktop operating systems, applications, and hardware.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and customer service skills.
• Ability to work independently as well as in a team environment.
• Flexibility to work outside of normal business hour

*To provide technical support to Chinese-speaking end-users. Proficiency in Chinese Mandarin is a must.

Brief Description:
Implementation, handling and troubling network-related matters

Scope of Work:

• Perform network administration
• Maintains network performance by performing network monitoring and analysis and performance tuning; troubleshooting network problems; escalating problems to vendor
• Administer and manage switches, routers, firewall and anti-virus systems
• Responsible for testing, commissioning, configuration, maintenance and operation of new network equipment
• Assist with VPN configurations and wireless troubleshooting
• Create and maintain documentation related to network configuration, policies, procedures and service records
• Participate and provide technical support in network implementation projects whenever required
• Provide standby remote support during weekends and after working hours for any production network related incidents
• Reporting network tasks and projects status to key stakeholders

Qualifications and Experience:

• Relevant network certifications, Prefer to have Cisco CCNA certification
• Minimum 3 years of IT experience in network management is preferred
• Good knowledge of Rack & Stack, Firewall, Routers, Switches, VPN and LAN/WAN technologies such as TCP/IP networking
• Strong experience with network & IT security
• Able to work independently and is a good team player
• Strong communication skills and interpersonal skills
• Possess good technical problem-solving and troubleshooting skills

Contract Type: 12 months

Salary: SGD4,000 to SGD5,500

Location: Punggol / East Coast / Jurong

Working Hours: Rotational shift
- i. Mon – Fri 8:30am to 4:30pm (onsite), Sat 9:00am to 1:00pm. (onsite)
- ii. Mon – Fri 10:00am to 7:00pm (onsite), Sat 9:00am to 1:00pm. (onsite)

Commencement: Immediate

Job Types: Full-time, Contract

Contract length: 12 months

Salary: $4,000.00 - $5,000.00 per month

Schedule:

• Monday to Friday
• Weekend availability

Experience:

• Network engineering: 1 year (Required)

Work Location: One location

Job Type: Contract

Contract length: 12 months

Salary: $4,000.00 - $5,200.00 per month

Experience:

• Network engineering: 3 years (Preferred)

Work Location: In person