The Site Engineer (Building) is responsible for assisting the Senior Site Engineer on the progress of site works and manpower related aspects of the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.

Value Add of Position

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team / department.
• Ensuring that the site works are completed with high quality standards and adhering to safety requirements throughout the project.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering from a recognized University
• Experience: Prior 3 years experience in building projects
• Minimally have completed 1 cycle of the project of at least $100M in project value

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Key Responsibilities:

1.Financial Planning & Forecasting:

• Assist in the preparation of the annual budget and quarterly forecasts.
• Develop financial models to project future performance based on various scenarios.
• Monitor and analyze budget variances and provide explanations for discrepancies

2.Data Analysis & Reporting:

• Prepare monthly, quarterly, and annual financial reports for management.
• Analyze financial data to identify trends, risks, and opportunities.
• Create and maintain dashboards and key performance indicators (KPIs) for business units.

3.Business Partnering:

• Collaborate with department heads to understand their financial needs and provide support.
• Participate in strategic planning sessions and provide financial insights to guide decision-making.
• Assist in evaluating new business opportunities, investments, and projects.
• Participate in building specific FP&A business partnering capabilities such as Commercial Finance, Production Costing Finance, R&D Finance etc.

4.Ad Hoc Analysis:

• Conduct ad hoc financial analysis as requested by management.
• Support special projects and initiatives that require financial expertise.

5.Process Improvement:

• Identify opportunities for process improvements in financial reporting and analysis.
• Assist in the implementation of financial systems and tools to enhance efficiency.

Qualifications:

Education:

• Bachelor’s degree in Finance, Accounting, Economics, or a related field. A Master’s degree or professional certification (e.g., CFA, CPA) is a plus.

Experience:

• 3-5 years of experience in financial planning and analysis, corporate finance, or a related field.
• Experience in financial modeling and forecasting.

Skills:

• Strong analytical and problem-solving skills.
• Proficiency in Microsoft Excel and financial modelling software.
• Familiarity with financial reporting tools and ERP systems (e.g. Netsuites, BI).
• Excellent communication and presentation skills.

Personal Attributes:

• Detail-oriented with a strong commitment to accuracy.
• Ability to work independently and as part of a team.
• Strong organizational skills and the ability to manage multiple priorities.

Ability to manage and communicate effectively with stakeholders

• Deliver integration standards to reduce operational risk and deliver operational excellence

• Define detailed technical requirements and scope of work for vendor or bank team for implementation

• Drive business and control partner initiatives such as Compliance Assurance and Communications Surveillance

• Support automation initiatives with goal of delivering service excellence and meeting compliance requirements

• Excellent organizational and communication skills

• Detail oriented

• Demonstrated ability to work as part of a team

• Ability to manage and communicate effectively with stakeholders

• Experience in Enterprise voice solutions/services and basis knowledge of server OS / configuration

• Effective communication skills with the ability to communicate technical information and manage difficult and complex stakeholder relationships at all levels

• Results driven with a strong desire to succeed and see all project and client deliverables through to completion

• Team Player with a “can do” attitude

• Experience working in the financial or banking industry, is a plus

• Takes ownership and accountability for actions / getting thing done and achieving quality of result

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Electrical and Electronics Engineer

Roles & Responsibilities

Job Description

· Be responsible for designing new product developments and sustaining matured products in the semiconductor automation equipment industry.

· To design and layout system-level electro-mechanical modules and interconnects.

· Maintain development and engineering documents and provide technical support to production and field.

· Ensure world-class quality and competitive cost.

· Committed to meet or exceed customer requirements and schedule.

Requirements

· Diploma / Degree in electrical and electronic engineering, mechatronics, or electro-mechanical engineering. ITE with more than 10 years’ experience will be considered.

· At least 1 year of relevant experience

· Strong fundamentals in actuators, servo motors, sensors, power supplies, cabling, and electro-mechanical engineering.

· Experience in safety consideration, good grounding practice, understanding and elimination of electrical noise, EMI/EMC compliance, and international standards requirements like CE, SEMI, IE, etc

· Knowledge of CAE/CAD such as PADS, AutoCAD, SolidEdge, MATLAB, etc.

· Familiar with measurement equipment such as oscilloscope, current probe, position sensor, accelerometer, etc.

[Job ID: 824053]

Responsibilities :

• Assist the Project/Site Manager in project planning, co-ordinate, execute and monitor all works on site.
• Responsible for daily site operation, monitor and co-ordinate works with supervisors.
• Supervise the team and ensure high standard of safety practices are carried out at all times.
• Plan on daily project activities and monitor progress to ensure civil and structural activities meet project specifications and project schedule.
• Undertake design and construction issues concerning all works, provide engineering inputs, resolving technical problems and ensuring quality of projects.
• Liaise with all parties involved in the project including Main contractor, relevant authorities, consultants, sub-contractors and suppliers.
• Co-ordinate with Procurement on delivery items and schedule.
• Ensure all project documentations (method of statement, work progress reports, daily reports, QA/QC report etc.) are submitted in a timely manner.
• Any other adhoc duties assigned by the Project Manager.

Requirements :

• Min. 1-3 years of relevant work experiences in construction industry.
• Ability to work independently, multi-task and have good communication skills.
• Willing to work at project sites.
• Competency in Microsoft applications including Words, Excel and Outlook.

To Apply, please kindly email your updated resume to [email protected]

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Ong Jia Hao Lavis

EA Personnel Registration Number: R21100883

EA License no.: 07C5771

Duties & Responsibilities

• Involved in the research and development for various cutting-edge machine learning, deep learning, computer vision, computer graphic and natural language processing algorithms.
• Able to identify and source relevant conference papers, analyze and extracting valuable insights and understanding the implications of the research
• Collaborate with engineer team and advance AI algorithms performance in various applications.

Requirements:

• PhD/MS degree in the area of Machine Learning, Deep learning, Computer Vision, Computer Graphics, Natural Language Processing or similar area.
• Solid foundations of maths and algorithms: probability statistic, linear algebra, geometry, optimization method, image processing, 3D modeling, .etc.
• 3-5 years’ experience in machine learning algorithm design and implementation and excellent skills in at least one of machine learning/deep learning tools such as Tensorflow, Pytorch, MxNet, .etc.
• Publications in top-tier ML conferences or journals is preferred

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

PRODUCTION ENGINEER/ EXECUTIVE ($3,500 - $4,000)

LOCATION: PANDAN RESERVOIR

WORKING TIMING: 7.30AM-5.00PM (5DAYS WORK WEEK)

1. We need a engineer or assistant engineer with mechanical educational background or years of experience hand on mechanical troubleshooting.

2. We can also search for experience technician that want to upgrade as assistant engineer or engineer.

JOB DUTIES & RESPONSIBLITIES:

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.

2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.

3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.

4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.

5. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.

6. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.

7. Maintain and improve housekeeping in all areas.

8. Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.

9. Ensure on time submission of overtime record to HR Dept for computation of monthly salary.

10. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.

11. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.

12. Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.

13. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.

14. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.

15. Assist in hiring of production personnel.

16. Maintain and update operating manuals for all the manufacturing equipment and facilities.

17. Maintain and update operating training manuals for all manufacturing processes.

18. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Skill/Experience

* Minimum 2-3 years working experience in manufacturing environment.

* NITEC/ HIGHER NITEC / DIPOLMA IN M&E OR MECHANICAL

* Able to supervise and lead the subordinates.

* Willing to work after working hour or during non-working days.

* Able to work under pressure.

* Computer literate.

* Knowledge in ISO is an advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

• Salary : SGD4,000 - SGD 5,000 + Commission
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Responsibilities:

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Requirements

• With relevant experience, preferable with Semiconductor industry
• Cert /Nitec / Diploma in engineering background
• Possess own transportation is an added advantage

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Description

• Collaborate with project engineer and quality team to design, develop, implement and deploy test processes for new projects.
• Complete test programs for production and manage test programs and control:

- Continuity Test

- 4-Wire Continuity Test

- Functional/Final Test

• Support instrumentation needs including:

- Work with engineers and technicians in development of headers

- Testing jigs

• Develop Acceptance Test Plan per product requirements.
• Develop and document testing procedures per product requirements.
• Engage in both sustaining and NPI support activities
• Identify necessary enhancements to diagnostics deployed in manufacturing and works with quality teams to drive corrective action.
• Ensure headers have sufficient quantity to support the production needs.
• Engage in both sustaining and NPI support activities.
• Perform root cause analysis for any testing related failures.
• Perform other duties/projects as required or assigned from time to time.

Requirements

• Degree in electrical or mechatronics engineering
• Minimum of 2 years experience in Electrical testing, Manufacturing, or similar roles.
• Strong background in testing principles, header & test jig development and processes.
• Design best-in-class performance testing approaches and plans for new projects per customer requirements.
• Must be well versed in electrical know how.
• Able to work well with inter-teams.
• Well versed in CIRIS tester will be an added advantage.

At Goldman Sachs, our Engineers don’t just make things – we make things possible. Change the world by connecting people and capital with ideas. Solve the most challenging and pressing engineering problems for our clients. Join our engineering teams that build massively scalable software and systems, architect low latency infrastructure solutions, proactively guard against cyber threats, and leverage machine learning alongside financial engineering to continuously turn data into action. Create new businesses, transform finance, and explore a world of opportunity at the speed of markets.

Engineering, which is comprised of our Technology Division and global strategists groups, is at the critical centre of our business, and our dynamic environment requires innovative strategic thinking and immediate, real solutions. Want to push the limit of digital possibilities? Start here.

The Opportunity

We own, evolve and support the technology platforms that handle the post-execution processing for the Securities Execution, Prime Clearing, and Prime Brokerage businesses. This includes exchange and broker trade processing, internal firm/firm trades and client delivery across physical and synthetic products. We are at the start of a multi-year convergence program to deliver all of these businesses onto a single, high scalable platform, enabling business growth with reduced operational costs.

We’re looking for highly technical, commercially minded, software engineers who enjoy seeing things done differently to join us on this exciting journey.

About the team

Our team consists of 19 people in Singapore and around 100 globally. Almost all of our projects are cross-location and cross-function, meaning we work directly with Front Office, Operations, Legal, Tax, and our Engineering colleagues from those areas, across the wider firm.

We work directly with Operations and Securities sales/trading, to design and implement, a wide range of functions including trade aggregators, trade matchers, payment systems, intercompany trade booking and settlement systems, and connectivity to exchanges, counterparties and vendors. Our Exception Workflow and Business Intelligence tooling allows our Operations teams to respond to client enquiries and monitor service levels.

Our Post Execution platform consists of a variety of applications that demand high throughput, performance and availability, including our strategic new Post Execution Sequencer platform which is a brand new/greenfield initiative to converge all of our businesses onto a single technology platform, to have much better scalability, improved resiliency and reducing the time needed to develop and deliver new features.

Highly-developed analytical and technical skills, combined with a commercial and collaborative approach to problem solving, are essential to our success.

HOW YOU WILL FULFILL YOUR POTENTIAL -

You Will:

• Use your analytical ability and decision-making skills to arrive at creative and user-oriented solutions.
• Work with key stakeholders, operations, and other development teams delivering scalable exception-monitoring solutions to our middle office teams.
• Drive the architectural design and technical execution of the engineering needs of the equities businesses.
• Take responsibility for project delivery as well as wider ownership in our functional area.
• Design and build frameworks including automated testing through collaboration with global cross-functional teams.

You Are:

• Strong, hands-on UI developer enjoys working in a client driven and agile environment passionate in implementing customizable user interfaces.
• Self-motivated and able to work in small, fast-paced, high-impact team(s) developing low latency, scalable and resilient solutions.
• Comfortable multi-tasking, managing multiple stakeholders and working as part of a global team.
• Apply an entrepreneurial approach and passion to problem solving and product development.

SKILLS & EXPERIENCE WE'RE LOOKING FOR –

Basic Qualifications

• 2 - 4 years of responsive web development, with professional React hooks experience and advanced JavaScript / Typescript proficiency.
• Experience with grid-based layouts, eg. ag-grid and flexible layouts.
• Solid experience in and strong desire on building highly efficient and performant UI code
• Building web socket-based (and/or REST API) integration with server-side.
• Desire to build strong and efficient SDLC practices.
• Systematic problem-solving approach, coupled with a hands-on experience of debugging and optimizing code, as well as automation.
• Strong interpersonal skills and drive. Excellent communication skills required, able to contribute to discussions on design and strategy

Preferred Qualifications

• 1+ years of experience with Java or similar object oriented language (e.g. C++, C#, Scala, Python).
• Financial market knowledge is a plus

ABOUT GOLDMAN SACHS

At Goldman Sachs, we commit our people, capital and ideas to help our clients, shareholders and the communities we serve to grow. Founded in 1869, we are a leading global investment banking, securities and investment management firm. Headquartered in New York, we maintain offices around the world.

We believe who you are makes you better at what you do. We're committed to fostering and advancing diversity and inclusion in our own workplace and beyond by ensuring every individual within our firm has a number of opportunities to grow professionally and personally, from our training and development opportunities and firmwide networks to benefits, wellness and personal finance offerings and mindfulness programs. Learn more about our culture, benefits, and people at GS.com/careers.

We’re committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: https://www.goldmansachs.com/careers/footer/disability-statement.html

© The Goldman Sachs Group, Inc., 2024. All rights reserved.

Goldman Sachs is an equal employment/affirmative action employer Female/Minority/Disability/Veteran/Sexual Orientation/Gender Identity

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Responsibilities

• Commissioning of AGV at customer sites which includes on-site user acceptance tests
• Ensure the performance and reliability of company fleet of AGVs, network and customer site infrastructure
• Provide high level troubleshooting to resolve issues that are beyond the capabilities of our first level support services from field technicians
• Monitor the health and operations of the company fleet of AGVs and proactively engage to resolve faults before they impact customer operations
• Respond and provide technical guidance to customers regarding operational issues, software updates and general maintenance
• Maintain up-to-date records of AGV and site configurations, this includes software and hardware configurations
• Communicate and collaborate with our global engineering teams
• Contribute to the development of instrumentation and automation for monitoring, detection, and self-healing of failures
• Contribute to the creation of user manuals, customer guides, FAQs, application notes and best practices
• Contribute to the design and creation of AGV missions using company proprietary mission description language
• Provide on pre-sales technical assessments
• Infrastructure includes reflective markers and networking equipment
• Participate in Proof of Concept (demonstrations) with demo AGVs
• Ensure strong relationships with all customer representatives

Requirements

• Bachelors or Diploma with experience in a technical field (including EE, ME, CS, Robotics) with 3 years of relevant (customer facing) work experience is preferred
• Must be able to focus and drive issues to closure in a fast-paced, agile environment.
• Strong communication and people skills. Customer-centric mindset. Willingness to go above and beyond to keep customers happy.
• Experience with Linux (ideally Ubuntu) administration, tools and Bash/Python scripting.
• Ability to troubleshoot and resolve device and system-level problems in Linux.
• Experience with firewalls, VPN and network security technologies
• Working knowledge of SSH, DNS and other network protocols
• Willingness to troubleshoot electro-mechanical components.
• Willingness to work within established systems and product results that either prevent problems from recurring or enable others to solve them more easily in the future.
• Strong team player
• Experience with ROS command line and graphical tools advantageous
• Benoi (pick up from Joo Koon MRT), Monday to Friday, 08:30 AM - 05:30 PM, Basic + 2 times bonuses + 14 AL, perm role
• Job Reference: QVRYW9R8

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Position title : Maintenance Engineer

Location: Tuas
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Responsibilities:

• Plan and lead the execution of a comprehensive deployment plan, including work planning, scheduling, budgeting, metrics, training, pilots and resources.
• Collaborate with all project teams to ensure alignment between all deployment-related activities.
• Liaising with the customer technical representatives.
• Provide recommendations to client on deployment of new features.
• Create and Manage requests on ITSM tool.
• Implement the changes as applicable, test the changes and handover to customer.
• Troubleshoot issues with Network Deployment.
• Troubleshooting critical incidents and problem tickets.
• Identify potential failures and recommend solution.
• Capacity management, forecasting and recommendation.

Requirements:

• L3 Network Engineer with min 7yrs of experience
• Good To Have Skills: No Technology Specialization.
• Should have supported Network deployments.
• Should have 6 years of experience in Network operational support/management roles.
• Excellent knowledge and troubleshooting skills on SD WAN, LAN segmentation, Cisco Switches, Cisco Wireless Access Points, Cisco Wireless Controllers, Cisco Routers, Firewalls Fortinet, Checkpoint, Cisco, Riverbed Bandwidth Optimizers, F5 Load Balancers, NetScaler and BlueCoat.
• Maintain design of LAN/WAN including protocols and routing.
• Identify potential failures and recommend solution.
• Update knowledge base with known errors.
• Excellent Written and Verbal Communication.
• Flexible to work in 24x7 shifts.
• Good understanding of procedures, application and concepts within own subject area and understanding them in the context of the business.

Summary:

• Basic salary up to $4000
• Variable bonus on a yearly basis
• OT fees available
• 5 days work week
• 7.30am - 5.00pm
• Location: Jurong East
• Engineer / Assistant engineer with mechanical background

Key Responsibilities:

• Ensure manufacturing processes operated with minimize manufacturing costs
• Manage the processes improvement program based on best practices in the metal drum making industry
• Conduct employee performance reviews and work closely with the HR department for any staff grievances
• Maintain work safety practice as well as housekeeping in all areas
• Prepare process documentation such as work instruction, process specifications and assist on the quality plan
• Ensure the subordinates are trained and equipped with up-to-date knowledge and skills
• Assist HR in OT records as well as recruitment of production personnel
• Prepare reports, maintain up-to-date training manuals and make recommendations for operation improvement
• Other relevant ad-hoc duties

Key Requirements:

• Min 2 years of experience in manufacturing
• Preferably with mechanical background
• Willing to work OT when needed
• Bilingual in English and Mandarin to communicate effectively with Mandarin speaking clients / stakeholders

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Responsibilities:

• Leading project planning, execution, and completion, ensuring on-time and within-budget delivery
• Managing schedules, budgets, and resources, and coordinating with clients, stakeholders, consultants, and subcontractors
• Prepare master construction program and catch-up program, if applicable
• Requires regular site inspections, risk management, and progress reporting
• Ability to manage Subcontractors and plan in progress for all works on site
• Involve in planning all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all
• Effective communication with stakeholders and maintaining strong relationships are key
• Ability to address and solve on-site issues that may impact project schedules
• Adherence to safety and environmental regulations, implementing best practices, and resolving technical issue

Requirements:

• Candidate must possess at least a Bachelor's Degree majored in Civil Engineering recognised by PEB Singapore.
• Minimum 8 years of experience in construction industry
• Experience in Road Works / Building Works Project will be preferred
• In-depth knowledge of construction methods, materials, and regulations
• Excellent client-facing and internal communication skills
• Demonstrated experience in managing the safety and timely delivery to projects
• Strong problem-solving skills and the ability to make informed decisions under pressure

We are looking for an experienced Optical Transmission Network Engineer. This role involves the operation, maintenance, and troubleshooting of advanced fiber optic transport systems, focusing on technologies such as DWDM, ROADM, ASON, and other Layer 1 and Layer 0 technologies. The ideal candidate will provide technical leadership throughout the project lifecycle, ensuring the successful deployment and ongoing performance of network systems

Responsibilities

• Operate, maintain, and troubleshoot fiber optic transport systems, including DWDM, ROADM, ASON, and related technologies
• Lead high-level and low-level design, developing implementation plans and guiding the deployment process
• Collaborate with the Project Manager in network design, site preparation, and risk mitigation throughout the project lifecycle
• Oversee the buildout and daily operation of customer networks, ensuring optimal performance and stability
• Perform network configurations, troubleshoot technical issues, and monitor system performance to meet customer specifications
• Proactively identify potential issues and implement solutions to improve network performance and prevent disruptions
• Respond promptly to network incidents, conducting root cause analysis and providing effective resolutions
• Assist in preparing technical proposals and solution presentations to customers

Requirements

• Bachelor's Degree in Electrical and Electronic Engineering or related field
• Expertise in network technologies such as SDH, MSTP, OTN, ASON
• Minimum 5 years of experience in telecommunication project implementation, network planning, and cutover experience in SDH, MSTP, and WDM Networks
• Strong skills in network device configuration and optimization for both efficiency and security
• Proven project management and troubleshooting abilities
• HCIA, CCNA, HDCP, or other related certifications are a plus

Interested candidates, who wish to apply for the advertised position, please click on "Apply Now". We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

We are seeking an experienced IT Storage Engineer to join a dynamic team, responsible for post-sales support and solution design for enterprise IT products. The ideal candidate will have hands-on experience in IT solutions for storage systems, servers, and virtualization technologies, with the ability to collaborate effectively across local, regional, and HQ teams

Responsibilities

• Provide post-sales support for enterprise IT storage products, ensuring customer satisfaction and system optimization
• Collaborate with internal teams to deliver solutions and meet deliverables
• Design and provide low-level IT solutions tailored to meet the needs of local office, channel partners, and key account customers
• Develop Bill of Quantities (BOQ) and technical proposals, ensuring they meet customer requirements and high-quality standards
• Present technical solutions to customers professionally and conduct training sessions for local partners and customers
• Assist in the development of strategies for data protection, disaster recovery, and data migration within storage systems
• Continuously learn and adapt to new IT technologies and storage solutions

Requirements

• Bachelor’s Degree in Computer Science, Engineering, Telecommunications, or a related field
• Minimum of 2 years of experience in IT product design, delivery, and maintenance, especially in x86 servers, SAN/NAS storage, virtualization (VMware), and Windows/Linux/Unix operating systems
• Strong knowledge in x86 server architecture, SAN/NAS storage, data protection, disaster recovery, and data migration
• RedHat RHCE, HCIA/HCIP/HCIE, or other relevant IT certifications are an added advantage
• Experience in IT post-sales support for FSI (Financial Services Industry) or government sectors is preferred
• Familiarity with OpenStack, Oracle DB, and related technologies would be a plus

Interested candidates, who wish to apply for the advertised position, please click on "Apply Now". We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Assist Project Manager in project planning and coordination on site.

Manage day to day site operations

Attend clients, consultants, sub-contractors and site meetings

Manage, monitor, delegate and motivate the construction project team.

Deploy required resources such as manpower, machinery & equipment in accordance to the project requirements.

Promote strong safety culture and ensure site safety and vironmental control measures are in place at all times.

Other role as assigned by Project Manager.

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

Job Scope:

• Managing & Directing the assigned project resources to best meet project objective
• Ensure all changes to specifications, work scopes, and drawings are properly documented
• Efficient management of resources and materials
• Responsible for project and site supervision, attend site meetings, coordination with sub-contractors, suppliers, consultants and clients and all scope of work that is require in the smooth implementation of a successful project development
• Assist in resolving any issues or challenges that may arise during the project execution
• Conduct regular site inspections and quality control checks
• Ensure compliance with safety regulations and industry standards
• Collaborate with internal teams to ensure successful project delivery
• Manage material at the construction site to ensure zero wastage and no overstock of material
• Manage manpower and overtime costs to ensure optimal cost-benefit within or below budget
• Coordinate and communicate with project teams, subcontractors, and suppliers
• Ad hoc duties as assigned

Job Requirements:

• Minimum 3 years of relevant experiences in Interior Fit-out Industry
• Minimum higher NITEC/Diploma holders or candidates with relevant experience and proven track records will also be considered
• Experience in Construction/Interior Design/Furniture Industry will be an added advantage
• Able to start work within short notice preferred

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694