Job Description

• To act as Senior Civil Site Engineer for the construction of underground MRT Station
• Plan and Supervise ERSS and Deep Excavation works
• Supervise and ensure strict quality control
• Prepare and Review Technical Documents
• Keep record of all site activities and prepare daily site report
• Supervise any repair works
• Monitor and report progress of the works on site
• 60 hours per week working hours

Requirements

• Possess a Degree in Civil Engineering
• Master Degree in Civil / Strutural Engineering is preferred
• Very good experience in deep excavation, Earth Retaining Stabilizing Structures (ERSS), piling works (bored piles, sheet piles, soldier piles), pile load testing (ULT and PDA), ECM and pipe jacking works
• Relevant experience in ground improvement techniques (DCM, WSM, and JGP)
• Relevant experience in the construction of strutting works, Excavation, Secant Bored Pile, Diaphragm Wall
• Minimum 12 years of relevant experience in the above area

Job Description & Requirements

• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance to the Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s) in performing their duties on site so that they can provide satisfactory supervision and to take responsibility of their work and performance.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting record of works, materials, equipment at site, attending meetings, keeping minutes of meetings and discussions, assisting in the co-ordination of Contractor’s works with Consultants and any external parties like neighbouring contractors and utility companies.

Requirements:

• Minimally a Degree in Civil Engineering recognized by the Professional Engineers Board.
• Candidate must be a registered Resident Engineer with BCA.
• At least 8 years site supervisory experience in LTA projects.

Must be literate in English and have a good knowledge to use computer, computer software, e.g. Microsoft

Responsibilities

· System Engineering Design

· Generating Test Plan & Procedures

· Sourcing and Procurement of System Hardware

· Planning and Setting up Test Lab

· Conduct Factory Acceptance Test

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults

· Perform On-Site Acceptance Test

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred

· Computer literate e.g. MS office, Visio

· Excellent Oral and Written Communication Skills

· Excellent Time-management

· Good Learning Capability

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• To be involved in the planning and execution of civil and structural engineering works.
• Assist Management in monitoring and managing the day-to-day operation of the projects.
• To prepare method of statement, construction sequencing, sketches, and other technical submissions.
• To monitor the execution of the site works. To review and further develop the method and/or sequence of the works to ensure safety and efficiency.
• To assist in the preparation of RA/SWP and other safety documents.
• To collaborate with peers, and to liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare Inspection and Test Plan, and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification and submit technical clarification to the clients and consultants. Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Prepare site record and submit to office in a timely manner.
• Undertake ad-hoc duties as assigned by the management.

Requirements:

• Candidate must possess at least a bachelor’s degree in engineering (Civil) or equivalent from a recognized University accredited with the Professional Engineers Board, Singapore.
• Preferably with design, consulting experience and Improvement works to Surface Car Parks.
• Conversant with Eurocode or Local codes and regulations as well as submission procedures.
• Well knowledge in CAD, BIM and other Civil Engineering software is necessary.
• Good project management and ability to work independently and under pressure to meet tight schedules.
• Proficient in MS office applications and keen to learn new things.
• Good communication skills and able to interact with people of all levels and teamwork.
• Candidates with more years of experience may be considered for a senior role.

About Us:
At Deriv, we are at the cutting edge of financial technology, revolutionizing CFD trading through AI. Our goal is to automate and optimize all aspects of operations, delivering unparalleled performance, innovation, and scalability. We are looking for a highly skilled AI Engineer to lead the development of sophisticated AI-driven systems that empower our business.

What You’ll Do:
As an AI Engineer at Deriv, you will design and implement advanced AI solutions, integrating them across all operational facets, from trading algorithms to customer experience. Key responsibilities include:

• Advanced Modeling: Develop and deploy deep learning, reinforcement learning, and graph neural networks for predictive analytics, automated trading strategies, and decision-making systems.
• NLP Applications: Implement state-of-the-art NLP solutions for sentiment analysis, document processing, and customer interaction enhancements using tools like spaCy, Hugging Face Transformers, and OpenAI APIs.
• Vector Search and Semantic Retrieval: Build systems utilizing vector databases like Weaviate, Pinecone, and Milvus to enable real-time, context-aware data retrieval.
• Agentic Systems: Design autonomous and multi-agent systems for dynamic decision-making and complex task management in trading environments.
• MLOps Integration: Deploy and maintain AI models at scale using tools such as MLflow, Kubeflow, TensorFlow Serving, and Seldon for seamless production workflows.
• Big Data Engineering: Architect high-performance data pipelines using Apache Spark, Kafka, and Hadoop for real-time and batch processing.
• Generative AI: Explore and integrate generative technologies, including GPT, DALL-E, and GANs, for innovative applications in user experience and content generation.
• Transformers and Architectures: Utilize advanced transformer models like BERT, T5, and ViT to solve complex problems in NLP and computer vision.
• Explainability and Fairness: Incorporate tools like SHAP, LIME, and Fairlearn to ensure AI systems are transparent, interpretable, and unbiased.
• Optimization: Use advanced hyperparameter tuning tools like Optuna and Ray Tune to maximize model performance.
• Cloud and Edge AI: Implement scalable AI systems on cloud platforms (AWS, Google Cloud, Azure) and optimize for edge computing with TensorFlow Lite and NVIDIA Jetson.

What You’ll Need:
We are looking for a candidate with exceptional technical expertise and a track record of delivering impactful AI solutions.

Technical Skills:

• Programming Expertise: Proficiency in Python, R, C++, or Java.
• Deep Learning Frameworks: Expertise in TensorFlow, PyTorch, and scikit-learn.
• Data Tools: Experience with Pandas, NumPy, and HDFS for data analysis and storage.
• Vector Databases: Knowledge of Weaviate, Pinecone, Milvus, or Annoy for similarity-based retrieval systems.
• Reinforcement Learning: Experience with tools like OpenAI Gym, Ray RLlib, and Stable Baselines.
• Generative AI Models: Familiarity with GANs, StyleGAN, BigGAN, and transformer-based models for various applications.
• MLOps and Automation: Proficiency in Docker, Kubernetes, MLflow, Kubeflow, and Seldon for scaling AI operations.
• Real-Time Processing: Hands-on experience with Flink, Kafka, and event stream processing for dynamic data workflows.

Soft Skills:

• Strong problem-solving and critical-thinking skills.
• Ability to collaborate effectively across teams.
• Proven ability to deliver under tight deadlines.

Preferred Qualifications:

• Advanced degree in Computer Science, Machine Learning, or related fields.

Why Join Us?

• Work on transformative AI projects with real-world impact.
• Collaborate with an innovative and forward-thinking team.
• Competitive compensation and growth opportunities.
• Access to cutting-edge technologies and learning resources.

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Details:

Our client is a significant player in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised telecommunication system integrator in the oil and gas global market, they provide turnkey project systems that cover a full spectrum of services in the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, and various telecommunication system drawings.

Salary: $3800 - $5500

Job Description:

1️⃣ Lead engineering design, ensure thorough understanding of client requirements to propose optimal solutions

2️⃣ Prepare engineering documents (VDRL) and address client feedback promptly with high quality and accuracy

3️⃣ Create preliminary drawings and guide AutoCAD drafters in producing engineering deliverables

4️⃣ Incorporate industry standards and best practices into design, drawing preparation, review, and submission

5️⃣ Supervise equipment assembly, cabinet integration, system configuration, simulation, testing, and verification

6️⃣ Provide in-house training for client and commissioning engineers

Requirements:

1️⃣ Minimum Diploma in Engineering (Electronics, Electrical, Mechanic, Marine & Offshore) or possesses technical knowledge about Maritime communication systems

2️⃣ Experience in a similar role within the industrial markets

3️⃣ Experience as an ex-sailor, Ex-Radio Officer, or Ex-Navy personnel are added advantage

4️⃣ Well-organised documentation and time management skills

5️⃣ Ability to articulate and share concepts with customers and suppliers

6️⃣ Knowledge of AUTOCAD will be an added advantage

7️⃣ Site commissioning/radio surveying experience as per SOLAS / MODU (Not a must-have but good to have)

8️⃣ Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, and iBwave for UHF/GSM coverage (Not a must-have but good to have)

⭕️ Please send your updated resume to: berrylim(at)rapidrecruitmentasia.com

For quicker response, please contact me (Berry) directly at:
Telegram: (at)Berryseisei or HP: (at)+65 92472216

Rapid Recruitment Asia Pte Ltd (16C8261)
Berry Lim (R23117685)

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

Job Description

• Designs of electrical engineering service for building projects, and knowledge of mechanical engineering services
• Prepare tender documents, call tenders, evaluate tender returns and recommend tender awards
• Project management, coordination, supervisions, testing and commissioning for installations of mechanical and electrical engineering services during construction phases. This includes reviewing shop drawings, progress claims and variation claims.
• Engage in discussions with relevant authorities for preparations and submissions of plans
• Attend meetings with clients, contractors and suppliers
• Manage project through defined project scopes, detailed project plans & seek client’s agreements for sign-off
• Track project status and provide regular updates to ensure projects are on tracks
• Any other works as may be directed due to specific requirement of the projects

Job Requirements

• Bachelor's Degree in Electrical Engineering or related fields
• Preferably 1 to 5 years of working experience in designs, supervisions and implementation
• Experience in engineering consultancy or construction industry would be an added advantage
• Able to multi-task and work in fast-paced environment

As an EUV Photo Project Engineer in Operation Central Team (OCT) Central Process and Equipment Engineering (CPEE) Photo Scanner at Micron Technology, Inc., you will lead project activities to achieve and maintain outstanding EUV Ecosystem in high volume manufacturing.

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

Responsibilities:

• Ensure a safety-first culture for all program and project solutions.
• Oversee the EUV Litho Cluster, including Scanner and Track installation, to meet TIQ (Tool Installation Qualification) goals.
• Close collaboration with EUV ecosystem suppliers (ASML, TEL, Edward Zenith, Zinter, etc) and internal partners (HVM fabs, Central Teams, Technology Development teams).
• Manage EUV Reticle support tools (e.g., Reticle inspection tools, Reticle Clean tools, EUV Reticle pod storage, Pod Clean tools etc) through closed collaboration with Fab and Central Reticle Teams.
• Drive EUV Industrialization goals by leading Supplier Workstream Programs (Eg: Scanner, Source, Drive Laser, TEL Track etc) to achieve industry outstanding performance in Imaging, Overlay, Rework, Defectivity, and Efficiency (Wafers Per Day).
• Drive and facilitate Governance meetings and cross-collaboration projects with internal and external partners to achieve Micron Strategic Initiatives (Eg: cost, yield, quality, Maxout, environmental sustainability).
• Demonstrate strong communication and reporting skills to provide regular Executive updates on project progress, challenges, and escalation for resource support.
• Oversee processes, guide initiatives, and lead project team members toward goal achievement using analytical skills and problem-solving techniques.
• Proactively identify bottlenecks, drive improvements, and share standard methodologies across HVM fabs.
• Demonstrate ownership and accountability in delivering results.

Requirements:

• Global Factory Network Expertise: Demonstrated understanding of worldwide high-volume manufacturing network operations across different geographical region.
• Leadership and Strategic Initiatives: Proven ability in team development and leading transformative initiatives.
• Manufacturing Knowledge: Familiarity with Front End (FE) manufacturing, reticle manufacturing, and fab processes.
• Project/Resource Management: Ability to manage Global Project and Resource.
• Effective Communication: Skilled at communicating effectively across various organizational levels.
• Customer-Focused Project Management: Proficient in project management with a strong customer focus.
• Continuous Learning Advocate: Continuous learning on the job and provide technical mentoring for peers.
• Minimum 4 years’ experience working as Photolithography Equipment/ Process Engineer or Photo Scanner Engineer in Wafer Fab. ASML EUV Scanner experience will be an advantage
• Bachelors/master’s degree in Electrical, Electronics, Mechanical Engineering

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Engineering Sales Advisor to join their Sales Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Engineering Sales Advisor:

• Present and sell products/services to current and potential customers.
• Develop and execute strategic sales plans for assigned products and clients.
• Engage customers to understand their needs and recommend suitable solutions.
• Analyze market potential and track sales progress within the territory.
• Build technical expertise on products to support customer interactions effectively.
• Cultivate and maintain strong client relationships to expand the product portfolio.

Requirements:

• Diploma in Mechanical Engineering
• 2 - 3 years Technical Sales experience in relevant industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Description & Requirements

Job Responsibilities :

• Preparation of document for presentations.
• Attending site visit for tendering project and project management.
• Involve in solving construction issues raised by construction teams
• Other duties assigned from time to time.

Job Requirements :

• Degree in Civil / Structural Engineering recognized by BCA and preferably recognizes by Professional Engineering Board, Singapore.
• At least 5 years of relevant experience preferred
• Familiar with AutoCAD, Microsoft word, Excel and Project
• Familiar with latest code of practice as per BCA requirement

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.
• Maintain systems and component capabilities through rigorous testing, track cutting-edge trends, search for ways to improve functionality and efficiency, and implement appropriate segments to keep production methods current
• Prepare comprehensive documentation for all electrical designs, including wiring diagrams and schematics, bills of materials, assembly drawings, design changes, test reports, design-validation plans, and reports ensuring that installations and operations conform to standards and customer requirements

Analyze customer and project requirements, and provide technical guidance and recommendations to project teams and stakeholders

● Develop and implement testing and validation protocols to ensure that electrical systems and equipment meet or exceed industry standards and regulations

● Collaborate with other engineers, project managers, and stakeholders to ensure that projects are completed on time, within budget, and to the highest quality standards

● Stay up-to-date with industry trends, technologies, and best practices in electrical engineering, and recommend new tools and techniques as needed

Responsibilities

· Responsible for the design, development and maintenance of Web3 applications based on Node.js and Go.

· Deep understanding and application of blockchain technology, especially in terms of multi-chain interoperability and wallet integration.

· Work closely with product and design teams to ensure technical solutions meet business needs and optimize user experience.

· Explore and evaluate new technologies and provide guidance to the team to ensure we leverage state-of-the-art technology implementations.

· Manage project timelines to ensure high-quality products are delivered on time.

· Write clear, maintainable code and conduct rigorous code reviews.

· Solve technical problems and improve system performance and reliability.

Requirements

· Bachelor's degree in Computer Science or related field.

· Minumum 10 years of backend development experience, including at least 5 years with Node.js and Go.

· Deep understanding of Web3, blockchain, smart contracts and decentralized applications (DApps).

· Experience or in-depth understanding of multi-chain wallet integration and management, including but not limited to Ethereum, Binance Smart Chain, Polygon, etc.

· Familiar with blockchain node management and transaction processing mechanisms.

· Excellent team leadership and project management skills.

· Ability to work independently and solve problems in a fast-paced environment.

Must have:

· Project experience in DeFi or related blockchain fields.

· Relevant experience in the fields of Web2 payment, financial management, Web3 payment, Staking, and Subscription.

· Strong understanding of cryptocurrency trading and security.

· Contributed to open-source projects or active in related technical communities.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Seeking Site Engineer with prior knowledge and experience tomaintenance and troubleshooting and repair equipments such asTLD ACU, GPU, Tow Tractor, ASU, boom lift and scissors lift, hydrauliccylinder and general electrical troubleshooting. Will be deploy atvarious site in singapore for general repair, servicing andmaintenance of basic ground support equipment.

• Oversee and manage the day-to-day operations of UAT environments
• Offer technical support to software development teams for application and testing needs
• Assist project management teams in various project-related tasks and activities
• Manage and maintain Windows and Linux server environments, ensuring optimal performance and security
• Perform infrastructure setup and deployment tasks for application environments, including configuration, provisioning, and deployment
• Handle account management activities, creating, modifying, and deleting user accounts and permissions
• Develop and maintain comprehensive documentation for application processes and procedures, including user guides, technical manuals, and standard operating procedures

Requirements:

Minimum 2 years of software development, testing, and support experience.

Strong proficiency in

• Database query languages (Oracle/MSSQL)
• SSH/SFTP client/server operations
• Public/private key and certificate management
• IIS web server administration, including certificate generation
• Linux server OS administration and command-line proficiency
• MSMQ messaging services
• Collaborative and independent software/IT project work

Strong proficiency in scripting for the following:

• PowerShell (Must Have).
• Windows Batch scripting (Must Have).
• VB scripting (good to have).

Additional Info:

• Company Location: East Side

To apply, please visit www.gmprecruit.com and search for Job Reference: 25029

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Job Descriptions：

- Provide support to the Human Resource department in day-to-day operations to align with company business goals and objectives.

- Data entry, coordinate with project teams

- Supports on staff onboarding

- Provide clerical and administrative support to HR dept and Manager

- Update daily, weekly and monthly attendance report.

- Check and submit employees' leave and claim.

- Assist with work passes application (WPOL, EPOL).

- Document controller task to be assigned

- Other ad-hoc duties as assigned

Job Requirements:

· Entry level candidates with no working experience are welcome to apply.

· Independent, ability to communicate effectively, responsible and able to work under pressure.

. Min Bachelor Degree in Human Resources/Business Study related

We are seeking a highly skilled and innovative Executive Engineer, Mechanical to join our dynamic team in Singapore, Singapore. In this role, you will be responsible for designing and implementing cutting-edge mechanical engineering solutions for various building and infrastructure projects.

• Design and perform calculations for mechanical engineering works, including ACMV, fire protection systems, plumbing, and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Develop comprehensive study reports, design reports, and technical specifications for mechanical engineering projects
• Prepare detailed tender documents and evaluate proposals, providing thorough assessment reports
• Collaborate with cross-functional teams to ensure project goals are met efficiently and effectively
• Provide support in project management and contract administration for building engineering contracts
• Implement innovative mechanical engineering solutions while staying up-to-date with industry trends
• Troubleshoot and resolve complex mechanical engineering issues as they arise
• Mentor junior engineers and contribute to the overall growth of the engineering team
• Ensure compliance with industry standards and regulations in all project phases

1. JOB DESCRIPTION

Job Title

LEW

Occupation

LEW

Job Description & Requirements

Job Description

Perform LEW inspection at construction sites and temporary supply

Assist in shutdown servicing of client's electrical installation

Requirements

Must possess LEW Grade 7 or Grade 8

• SGD 4,000 – SGD 8,000 + Variable bonuses
• Consultancy handles projects in government agencies, industrial, commercial & residential granting a competitive advantage
• Excellent career progression + Equal opportunities for advancement
• Attractive employee welfare benefit
• Location: Bugis area | Mon – Fri

Responsibilities

• Undertake design development and detailed designs.
• Attend site/ project meetings with clients, consultants and contractors.
• Familiar with engineering software and the latest code of practice.
• Senior hire would require to plan, coordinate, manages and supervises the civil & structural project.

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Working experience in a Civil & Structural consultancy firm.

Applicants are encouraged to include the following in their resume:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898