• assist in manual work such as lifting, carrying, shifting, transferring of materials/chemicals.

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.

• Ensure proper communication and handling over of shift duties

Requirements:

• Minimum Diploma/Nitec in Chemical or related fields

Salary: Up to $3200 (basic) additional transport and shift allowance will be given

Duration: Immediate for 1 year

Location: Tuas (islandwide pickup)

Shift Pattern: 2-2-3 (8am-8pm/8pm-8am)

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Candidates are expected to:-

• Carry out repair, maintenance, and troubleshooting of machinery onboard PSA Marine harbour crafts
• Liaise with Fleet Operations team on breakdown reports and harbour crafts status
• Perform lathe machining, basic gas welding, and cutting works to facilitate repair to machinery
• Assist in lifting activities, forklift operation, confined space assessment
• Perform proper disposal of used oils and chemicals

The ideal candidate should preferably:-

• Possess at least a Nitec in Marine Technology, Electrical Engineering, or Mechanical Engineering
• Be proficient in Microsoft Office applications
• Possess a valid Class 3 driving license and MOM accredited certifications such as SSIC, Safety Supervisor, Lifting Supervisor, Forklift Driving
• Prior experience in performing mechanical fitment, basic gas and TIG welding, hydraulic and pneumatic system troubleshooting will be considered favourably
• Candidates with relevant experience may be considered for a senior position

*New hires may be eligible for a sign-on bonus of up to S$3,000. Terms and conditions apply.

Responsibilities:

• Project handling from sizing to roll-out cloud-based solutions.
• Design and implement cloud-based solutions using platforms such as AWS, Azure, or Google Cloud.
• Architect and configure scalable, secure, and high-performing cloud environments.
• Design, implement and administer Storage Arrays of multiple vendors like EMC, Hitachi and Netapp.
• Automate infrastructure provisioning using Infrastructure-as-Code (IaC) tools (e.g., Terraform, CloudFormation).
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi-AZ VPC Instances
• Troubleshoot and resolve cloud environment issues efficiently, actively engage stakeholders during Incident management and change management process.
• · Ensure the security of cloud environments by working with Infra team to implement best practices, including IAM, encryption, and firewalls.
• Optimize cloud resources for performance and cost efficiency, including rightsizing and cost analysis.
• Work with Infra team to manage, monitor, and optimize cloud infrastructure to ensure high availability and reliability.
• Implement and maintain monitoring and alerting systems using tools like CloudWatch, Azure Monitor, or Google Stackdriver.
• Work closely with developers, DevOps teams, and stakeholders to ensure smooth cloud integration and operations.
• Evaluate and recommend new tools and services to improve the cloud infrastructure

Requirements:

• Bachelor’s degree in computer science, Information Technology, or a related field with 5 to 10+ years of experience in cloud engineering and/or cloud system administration. Proven experience as a Cloud Engineer, with clear understanding of cloud and on-premises infrastructure and network components. Experience in multi-cloud environments like AWS and Azure is a must
• At least 3 to 5 years cloud solutions project handling experience from sizing to roll-out, preferably with project management background.
• Design, implementation and administration experience of Storage Arrays of multiple vendors like EMC, Hitachi and Netapp is a must.
• Storage performance tuning and troubleshooting for cloud environment.
• Must have hands-on implementation experience on Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Must have hands-on implementation experience on AWS Cloud Specific technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Good understanding of AWS Elastic Block storage (EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Incident management and change management process knowledge.
• Strong analytical skill, very initiative, good planning & systematic execution

• Responsible for building services such as interior and external building architect elements.
• Assist in maintaining the operational readiness, safe and efficient operation of the Hospital.
• Keep track, manage and renew licensing matters pertaining to building authority requirements.
• Oversee outsourced maintenance team safety practice and work conduct and ensure good maintenance standards are implemented.
• Review, refine and ensure all building maintenance Fix-It works are carried out according to the submitted programs and procedures, and fulfil the service level requirement.
• Analyse the frequent issues brought up, recurring problems with building services, find root cause to the problem and make recommendations to resolve it.

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Seeking experienced and knowledgeable engineer for chiller (central air conditioning).

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit reports
• Execute commissioning processes for new chiller installations
• Adhere to safety protocols and regulations

Requirement:

• Degree / Diploma in Engineering equivalent
• Minimum 2 years of relevant working experience
• Have full understanding of Instrumentation HVAC/ACMV control like AHU, Chillers, RCU etc.

All qualified applicants, please send in your resume to:

[email protected]

Jacqueline Fong Hsin Ting (R21103226)

Recruit Express Pte Ltd

Company Reg. No. 199601303W

Job Description & Requirements

Get to know the Role:

• As a Site Reliability Engineer (SRE) you will help build a meaningful engineering discipline, combining software and systems to develop creative engineering solutions to operations problems.
• Much of our support and software development focuses on optimizing existing systems, building infrastructure and reducing work through automation.
• You’ll join a team of curious problem solvers with a diverse set of perspectives who are thinking big and taking risks.
• As an SRE you’ll be focused on running better production applications and systems.
• SRE is a key contributor to core infrastructure and functional development teams throughout the life cycle to help support software for reliability and scale.
• Key areas of focus include automation, application/platform uptime and quality, packaging/distribution techniques, platform design “operability”, analytics, deployment, adoption, and tool development, among others.
• The position will wear many hats from owning day to day health and performance, to identifying incidents/developing remediation plans, to working with open source software and experienced packaging techniques, to working with development teams and contributing to the strategic roadmap and execution.
• Candidates from a variety of software, platform, or automation engineering backgrounds will be considered for this position.

The day-to-day activities:

• Design, code, test and deliver software to automate manual operational work
• Troubleshoot priority incidents, facilitate blameless post-mortems and ensure permanent closure of incidents
• Engage with development team throughout the life cycle to help develop software for reliability and scale, ensuring minimal refactoring or changes
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions
• Perform the L1/L2/L3 support activities for the Production Support project with analysis and design work, including impact of requirements across all system components
• Build and drive adoption for greater self-healing and resiliency patterns
• Design automated software and product upgrades, change management, and release management solutions
• Participate in the 24x7 support coverage as needed

The must haves:

• Bachelor's degree in information systems, information technology, computer science, or similar.
• 1-3+ years professional experience in a software management position.
• Experience with dockers / containers / k8s.
• Direct production operations experience in a cloud environment.
• Experience contributing to technology and product strategy.
• Experience leading capability building initiatives across diverse areas such as infrastructure and operations automation, software quality, delivery automation and other core engineering.
• Demonstrated experience of driving operational efficiency and transparency of a growing engineering organization.

Job Title: Cybersecurity Engineer

Employment Type: Contract

Working Hours: Hybrid Working Arrangement

Location: One North

Salary: Up to $5,000

The Cybersecurity Engineer supports client’s cybersecurity by monitoring systems, managing alerts, and aiding in risk management and response coordination.

Key Responsibilities:

• Monitor and triage security alerts from SIEM systems.
• Assist with management of SIEM, PAM, AV, EDR, and Web Proxy systems.
• Support user and privileged account management, including onboarding and offboarding.
• Assist with vulnerability scans and compliance tracking.
• Analyze phishing emails to identify threats.
• Conduct risk assessments and recommend mitigation strategies.
• Distribute and track cybersecurity advisories.
• Respond to Requests for Information (RFIs) from cybersecurity agencies.
• Handle internal RFIs related to security incidents.

Requirements:

• Diploma in Information Technology, Cybersecurity, or related field
• Min. 1 year of relevant experience in cybersecurity operations
• Good to have SIEM, PAM, AV, EDR, Web Proxy

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Siew Ting (Maeve) - Outsourcing Team

ScienTec Consulting Pte Ltd – 11C5781

Role and Responsibilities

• To co-ordinate with the clients, subcontractors, and consultants on project matters
• Management, supervision and coordination of construction activities.
• Supervise team members, subcontractors and daily work activities on one or more project site(s) allocated.
• To ensure supervisors and workers meets client & regulatory requirements, environmental, safety and health requirements
• Monitor progress at site and put up progress claim.
• Coordinate and assist QS and Project Manager on project progress and claims.
• Other adhoc duties by management assigned from time to time.
• Participate in project design meetings and propose improvements.
• Evaluate potential problems and technical hitches and develop solutions.
• Plan and manage team goals, project schedules and new information.
• Manage project-related paperwork.
• Direct project correspondences by preparing and reviewing project proposals, memos, meeting minutes and emails.
• Communicate with clients to identify and define project requirements, scope and objectives.

Requirements

• Minimum Diploma Holder/ ANY
• Minimum 5 years' experience in site coordination.
• Excellent project management skills
• Team leadership
• Working knowledge of various computer software programs (MS Office, POS)

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Technical Sales Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Develop and grow key accounts in the Oil & Gas or Petrochemical sector.
• Establish and maintain business relationships with target customers to secure sales.
• Cultivate a comprehensive understanding of the customer’s operations and objectives.
• Develop and adhere to optimum profit margins and pricing points.
• Monitor assigned accounts - including progress, customer requests, competitor activity, and execution updates.
• Collate forecasts and reports for each key product/service offering assigned.
• Plan and negotiate long-term contracts with key account customers.
• Present and close sales opportunities to executives at major oil companies.
• Continually push company’s product/services to existing customers.
• Coordinate site work and discuss technical requirements on-site with customers.
• Review customer requests and provide technical solutions.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent.
• Has 3 years of working experience in downstream oil and gas/petrochemical industry preferred.
• Prior experience in flange management is advantageous.
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Chemical Manufacturing Company
• Position Title: Sales Executive/ Business Development Executive
• Working Location: Tuas South (Transport provided from JE/ Pioneer MRT)
• Working Hours: 5 days (Mon – Fri, 8 am – 5.30 pm)
• Salary Package: Basic up to $4,500 + Transport allowance $1,000 + Bonus
• Duration: Permanent Role

Key Responsibilities

• Identify and target potential customers in industries such as pharmaceuticals, food, and cosmetics.
• Build and maintain strong relationships with both new and existing clients.
• Develop and execute effective sales strategies to meet targets.
• Generate leads through networking, cold calling, and other sales methods.
• Prepare and deliver compelling sales presentations and proposals.
• Stay informed on industry trends, market conditions, and competitor activities.
• Conduct market research to explore new business opportunities and markets.
• Analyze sales data and market trends to create sales forecasts and strategies.
• Prepare regular sales reports covering performance, forecasts, and market analysis.
• Provide insights and recommendations to enhance sales performance and meet targets.

APPLY NOW!!!

• At least a Diploma in Chemical Process Technology or equivalent.
• Minimum of 3 years’ experience in sales in the chemical industry.
• Strong knowledge of chemical products and their applications.
• Possess own transport.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69945 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: IT Communications Service Provider
• Position Title: System Support Engineer (Telecommunication/ PABX)
• Working Location: Central (Nearest MRT: Mattar)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Basic + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Configuration of Voice/Network peripherals, VoIP/ Cloud PABX, Network Switches etc.
• Provide helpdesk and remote support to customers, as well as onsite technical troubleshooting.
• Validate System Design Documents to ensure alignment with customer requirements.
• Build and maintain strong customer relationships through a proactive approach and positive attitude.
• Continuously acquire and update product knowledge in line with industry trends.

APPLY NOW!!!

• At least ITE with minimum 1 year of related working experience.
• Experience in deploying and managing Voice/Data project, supporting VoIP telecommunication systems, network switches, troubleshooting LAN/VoIP systems is an advantage.
• Good knowledge in IT and communication system/PABX is required
• Alcatel, Mitel and Yeastar PABX knowledge will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71498 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities

Mechanical

• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all mechanical works are carried out according to the latest revision mechanical drawing and complies with contract specification, class requirements and quality management system.
• Arranges coordinate and carry out all the inspection inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Performs material equipment incoming are as per Vendor document;
• Verifies tools and equipment used are as per procedures;
• Familiarizes with mechanical inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Verifies preservation are being performed as per preservation plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Prepares review and document inspection records, certificates and NDT reports for the submission to relevant party.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly key performance indicators (KPI) related to mechanical.
• Verifies mechanical MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.

Dimension Controller

• Implements dimensional control methods and procedures throughout the fabrication and integration process of the modules to meet the requirements of project specifications and codes.
• Conducts dimensional checking using latest electronic total stations before and after welding of the main deck frame and main column of the modules to ensure that the dimensions are within specifications.
• Reviews design drawings, do necessary best fit calculations, prepare professional dimensional control reports using AutoCAD and get approval by the clients and/or certifying authority.
• Maintains dimensional survey equipment and keep proper documentation of dimensional control reports to meet project requirements and QA/QC audit standards.
• Gives guidance and advice to sub-contractors on how they can increase their productivity.
• Liaises with key stakeholders including Client on the dimensional control methods, acceptance criteria in accordance to project requirements.
• Prepares and compile final dimensional control survey reports as part of the final documentation report.

Electrical

• Takes charge of projects, coordinate and carry out all E& I QA/QC activities for the projects including hazardous zone equipment’s inspection (ATEX/CompEx/IECEx Certified).
• Review and evaluate the drawings as per Classification Societies and Client’s requirement.
• Prepares the QA procedures and get it approved with Classification Societies and Client.
• Witness the testing of HV/LV circuit breaker/starter, neutral earthing resister/fuses and cable megger-ing.
• Coordinates all termination inspection of electrical installation of equipment.
• Preparations of electrical or mechanical completion for equipment.
• Carries out the inspection and testing with Class Surveyors and Class Representatives.
• Ensures all quality control documents are compiled and information’s are handed over for as-build.
• Coordinates daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Monitors and ensure all work is carried out according to the latest revision electrical drawing and complies with contract specifications, Class requirements and Quality Management System procedures.
• Checks and endorse inspection record prior to issue to Client.
• Ensures subordinates comply with Company’s procedure and work instruction
• Reports any non-conformance (NC) and issue Corrective Action Request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly Key Performance Indicators (KPI) related to electrical and instrumentation.
• Verifies electrical and instrumentation MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Coating

• Goods knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
• Witness prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
• Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
• Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
• Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
• Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
• Able to handle painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
• Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
• ·Able to send enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
• Ensures calibration certificates of painting instruments are valid & available for reference
• Supervises the workplace and workers safety.
• Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
• Reviews Inspection Test Plan (ITP) as per project specification and procedures
• Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
• To monitor all painting/coating related works and ensure all final products meet project specification requirement.
• Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
• Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
• Conducts onsite audit as per relevant specification and customer requirement.

Structural

• Takes charge of project and carry out all QA functions for the assigned project.
• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all piping works are carried out according to the latest revision piping drawing and complies with contract specification, class requirements and quality management system.
• Coordinates all the inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Materials verification done with the specified mill certificates and codes;
• PMI testing on incoming, welder material;
• Verifies material use on sites are approved project materials;
• Familiarizes with piping inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Ensures project documents including inspection, traceability records, certificates, radiography films, and NDT reports are submitted to relevant party to signing.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Implements and compile the monthly key performance indicators (KPI) related to piping.
• Verifies piping MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Requirements

• Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
• Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as QA/QC Structural Inspector.
• Working in FPSO/FSO/FPU Project will be added advantage.
• Shall be familiar with AWS D1.1, API 2X, ASME Section II, and ABS Class rules.
• Certified Welding Inspector (AWS CWI or CSWIP 3.1)
• NDT Level II in RT/UT/MPI/PT

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 7:30am - 5:15pm

Fri: 7:30am - 4:15pm

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

1. Diploma or above, major in marketing and business management is preferred.

2. Have more than 2 years working experience in market development or sales. Familiar with medical equipment, aviation equipment and semiconductor equipment industry is preferred.

3. Proficient in English, with good communication and negotiation skills.

4. Be familiar with the Singapore market and understand the local business culture and consumption habits.

5. Have strong market analysis and judgment ability, and be able to formulate effective market development strategies.

6. Have good team spirit and ability to work independently.

7. Be able to adapt to business trip and work pressure, and have strong self-drive and sense of achieving goals.

8. Skillful use of office software and sales tools.

Responsibilities of marketing salesman:

1. Be responsible for investigating Singapore market and global market, collecting and analyzing market information and competing products.

2. Develop Singapore and global customer resources, establish and maintain good customer relationships.

3. Formulate and implement the market development plan and achieve the sales target.

4. Promote the company's products or services, and enhance the brand's popularity and influence in the Singapore market.

5. Coordinate internal and external resources to ensure the smooth progress of the project and meet customer needs.

6. Feedback the market dynamics and customer demand in time, and provide a basis for the company's strategic adjustment.

If you are interested in this job, please contact Mr.Ning @ [email protected] ASAP.

We are seeking experienced frontend engineers to support our client's expansion in the gaming fintech industry.

What you could expect:

• Flexible working arrangement
• Sponsored training and business trip opportunities.
• Competitive compensation.
• No lay-off.

Responsibilities:

1. Develop and maintain the company’s core internal systems, including event pages, embedded apps and backend systems...
2. Optimize frontend performance for smooth user experience on low-end devices and weak networks.
3. Write clean, maintainable code and conduct code reviews.
4. Stay updated on frontend technologies to enhance product competitiveness.
5. Address cross-platform and browser compatibility issues.

Requirements:

1. Bachelor’s degree or above, with 3+ years of frontend development experience.
2. Proficient in HTML5, CSS3, and mobile layout design.
3. Skilled in JavaScript with strong coding and organizational habits.
4. Proficiency in Mandarin is preferred to liaise with Chinese-speaking stakeholders.
5. Expertise in frontend performance optimization.
6. Proactive, responsible, and capable of driving project progress.
7. Strong collaboration and communication skills.

Interested applicants please apply directly here or send your resume to [email protected] and attn it to Vicky Zhang (R23116827)

Short listed candidates will be notified;

www.bmjconsulting.co

EA Registration Number: R23116827

Data provided is for recruitment purposes only

Business Registration Number: 202302928R. Licence Number: 23S1715

Requirements:

Minimum - bachelor’s degree in civil engineering

Job Description

1. Experience in Civil Engineering Design works in the area of;

- Structural Steel design

- Reinforced Concrete design

- Geotechnical Engineering Design

4. Able to work under rushing schedule of works

5. Able to do AutoCAD drafting (if required)

6. Familiarize with preparation of Authorities Submission documents (BCA, URA, JTC, etc..)

7. Able to communicate with clients and Authorities

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Our client is a distributor of automotive and industrial solutions.

• Manage and configure infrastructure systems and applications, network devices, desktops, mobile devices, and remote devices.
• Ensure automatic system backups, successful execution of recovery and disaster recovery plans, application of patches, and closely monitor system resource usage.
• Collaborate with external vendors to ensure compliance with Service Level Agreements (SLA).
• Research and source products, solutions, and vendors for ongoing projects.

Requirements:

• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of relevant working experience.
• Skilled in enterprise networking, with expertise in WAN, LAN, and VPN optimization, implementation, and support.
• Knowledgeable about Alcatel PABX, FortiGate devices, Cisco Systems, and Unifi Wireless AP Controllers.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS system experience and DeltaV Batch experience required
• Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

Roles & Responsibilities

Responsibilities:

• Undertaking civil engineering design, review and project management for a wide range of projects including land development, road infrastructure, high-density retail, and other civil infrastructure Providing assistance to different staff or engineering teams.

• Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.

• Prepare technical reports, cost estimates, and project specifications

• Monitor construction progress and ensure compliance with safety standards

• Manage and coordinate the work of contractors and other personnel involved in civil engineering projects

• Research and evaluate new technologies and materials for civil engineering projects

Requirements:

• Degree in Civil Engineering or Building

• Good knowledge and experience in building-related works such as civil engineering, structural, architectural, building repair, carpentry, partition, renovation, plumbing works, etc

• Experience in the construction of building projects including M&E facilities installation and maintenance regime is preferred

• Possesses excellent communication and interpersonal skills

• Must have initiative and drive to resolve site issues to achieve project success

• Proficient in MS Work & Excel and drafting of letter

Kindly include the following on your CV/Resume:

• Last drawn Salary

• Expected Salary

• Availability and Notice Period

Prepare, plan and schedule of work sequences for construction operations as per construction drawings, specifications and contracts to understand project requirements.

Liaise with consultants, client and sub-contractors and coordinate for site activities arrangements.

Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing/final approved drawing from authorities. ·

Monitoring work progress and ensure that civil contracted works meet all practical, commercial, requirements of productivity, quality and contract target completion. ·

Ensure all structural work is carried out within established budgets and schedules. ·

Manage internal and external contractors well to ensure quality of work and scope of work is within specifications. ·

Responsible for all inspection activities being carried out. ·

Assist the project manager in the daily coordination, planning and execution of the project plan site.

Prepare daily/weekly/monthly site work progress ·

Adherence to safety practices in the workplace and ensure compliances to standard rules and regulations. ·

BBS production and delivery monitoring and prepare RTO allocation for inspection, concrete booking and materials requisition.

Review drawing and design drawing issue monitoring ·

Handling technical and engineering problems on site. ·

To facilitate project meetings and prepare minutes of meeting

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Responsibilities

• Collaborate with the production and planning teams to prioritize tooling schedules based on the current tool status and production demands.
• Provide technical support to the tool designing and sales teams, ensuring that customer requirements are met through effective tooling solutions.
• Take a leadership role in problem-solving and troubleshooting within the tooling team, identifying root causes and implementing corrective actions.
• Support continuous process improvements for tooling and work processes to enhance productivity and efficiency across the department.
• Work closely with the toolroom to identify machining needs for tooling modifications and improvements, ensuring tool readiness for production requirements.
• Oversee and guide the toolmakers, training them to enhance their skills and ensuring high-quality standards are maintained in all tooling activities.

Requirements:

• Diploma in Precision Engineering or equivalent.
• Technical qualification in Tool & Die Making or a related field.
• Ability to lead and manage a team, fostering collaboration and continuous improvement.
• Strong problem-solving skills with experience in root cause analysis and troubleshooting.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L739Y7RX