Job Description & Requirements

• To supervise and lead a team of workers on tunnelling activity including temporary and permanent structural tunnel work
• Ensure health and safety compliance on site and contribute to risk assessment specification document.
• Responsible for site inspection & defect recification with QPS joint inspection.
• Coordination with site team and the client for launching of TBM's
• Subcontractor coordination and logistics management
• Follow with LTA provision, Singapore Construction Code of Pracctice and safety prerequisites
• Maintaining adequate information and communication for the filed construction works
• Follow the project contract activities, analyze risk situation and take proactive control where required
• Diploma/Degree in Mechanical/Electrical Engineering
• Minimum 7 years of engineering experience
• Minimum 5 years of experience in managing bored tunnelling E&M works of similar scale and complexity

a) Minimum Diploma in Mechanical / Electrical Engineering

1. To study the contract documents and drawings and verify if there are any discrepancies

among the drawings. All discrepancies shall be brought to the attention of the design team

concerned.

2. Liaise with the contractors/sub-contractors in the coordination of site works

3. Ensure the contractors maintain work safety, cleanliness and tidiness of the site

4. To ensure that all installation methods and materials used are in accordance with the

contract drawings and specifications.

5. To liaise with the contractors and design team in the checking and approval of shop

drawings, catalogues and samples.

6. To liaise with the contractors for the witnessing, inspection and coordination of site works where required.

7. To supervise the construction of mechanical and electrical works, and work with other resident supervisory staff deployed on site for successful completion of the Project;

8. To generate defects list, supervise and monitor progress of rectification works and ensure

all defects are rectified.

9. To follow up on site for the Consultant comments on shop/as-built drawings.

10. To check operation and maintenance manuals.

11. To assist in handing over of the installations to the Employer's maintenance staff.

12. To undertake any other duties related to the project as and when instructed by the

Employer.

13. For Acceptance Inspection and Commissioning Tests, all test reports and certificates shall be endorse by the site staff (RTO) and shall be forwarded to Architects/S.O. or employers representative for review and acceptance.

14. To supervise the execution of the Works and ensure that the Works are carried out by the Contractor in accordance to the specification / bills of quantities, drawings and all other contract documents and shall exercise all necessary supervision to ensure Employer’s interest are protected during the course of duty. In connection herewith, the Consultant shall engage the approved number of full-time residential technical officer (RTO) to carry out the supervision of the installation of the mechanical and electrical works during the contract period including any extension of time. They shall directly report to the Consultant.

15. To prepare weekly and monthly site inspection and progress reports for the Consultant.

16. To maintain records of all site correspondences and inspections records.

17. To verify site installations and work done on site, to facilitate progress claims made by the Contractor.

Our client is a well established medical devices company with a strong product portfolio.

• Work with cross-functional teams to ensure implementation and/or maintenance of QMS that are appropriate for Medical Devices / Life Sciences Manufacturing / Medical Devices
• Distribution and Services, complies with Commercial/Distribution Quality System such as GDPMD and may also include, but not limited to FDA 21 CFR Part 820, ISO 9001, ISO13485 and other applicable regulatory and statutory requirements.
• Support external audit by certification body and/or regulatory inspections by regulatory agencies e.g. US FDA.
• Coordinate, plan and perform internal audits of processes, facilities and documentation to assure compliance with internal procedures, FDA 21 CFR Part 820, ISO 9001, ISO 13485 and GDPMD regulations and requirements.
• Establish, maintain and update relevant QMS documentation.
• Support in the preparation of generation of metrics and reports to support Quality Management Review.
• Maintain calibration records for all manufacturing tools and equipment.
• LMS administrative role for local procedure and practice.
• Interface with production, process, and test engineering to ensure that products are consistently produced and controlled as per ISO / Part 820 requirements
• Provide QA support in the design, development, sustaining and production of life science / medical device products, facilitating the application of change controls, inspection and testing, risk management activities and quality plan for new product introductions / existing products are in order to sustain product competitiveness while maintaining compliance to domestic and international regulations and standards.
• Conduct customer feedback/complaints and trend review, and drive appropriate continual improvement implementation

What you should do now

Apply to this job ad or send your CV across to me at [email protected] for a confidential discussion.

(Brunel International South East Asia Pte Ltd, Registration Number: 199603098R | Company License Number : 16S8067 | Eve Ng EAP Registration Number R2198025.)

Must-Have

• experience in Backend Semiconductor industry.

Core Responsibilities

• Build up cost models to provide package cost estimates and manufacturing readiness inputs to business unit, engineering and factory
• Support critical meetings with internal cross functional teams on product / package costing
• Develop relationships with factory, sales and business units to ensure alignment with industry and customer trends
• Responsible for production pricing maintenance duties, including approving pricing issues in SAP
• Assist global sales take-or-pay coordination and reconciliation
• Adhoc analysis of various revenue related items

Job Specifications

• BS degree in Engineering.
• Minimum 2 years of relevant experience in Backend semiconductor industry.
• Direct experience and/or strong familiarity with semiconductor Leadframe, Wirebond, Substrate or FlipChip opportunities is a plus.
• Demonstrated understanding of manufacturing processes and raw materials.
• Advanced Excel usage and large data set manipulations.
• Strategic thinker with a proven ability to translate technical requirements/issues into the business context or vice versa.
• Able to work independently and to multi-task, excellent communication and presentation skills and working across functional groups as well as cross-culturally.

Interested applicants, please kindly email your update resume to [email protected]. We regret to inform that only shortlisted candidates will be notified.

Roles & Responsibilities

Job Responsibilities:

• To fetch construction workers to and from jobsite to Dormitory.
• Perform other ad-hoc duties when assigned.
• To coordinate all safety or urgent matters at site.
• Liaising with main or sub-contractor for coordination work and installation
• Monitor site safety and ensure that all safety requirements are enforced
• Manage all on-site matters and assist in technical issues

Job Requirements:

• Possess a valid Class 3 / 4 driving license with good driving record
• Must have relevant 3 years working experience
• Familiar with Singapore roads and landmarks
• Good interpersonal skills and attitude, reliable and responsible
• 6 days work week

need a tile layer supervisor with 2 years work tile work experians. must have tileing certification.

• MNC Consultancy
• Fantastic career progression
• West Side project
• 5.5 Days

Responsibilities:

• To manage and provide technical support for M&E services under IFM and A&A projects
• Attend meetings with clients , consultants and strategic partners
• Manage work schedules, project timeline and overseeing maintenance works
• Manage Minor / Major repairs and replacement (LCR) for M&E systems
• To be involved in Innovation and sustainability
• Attend to work request and fault calls by Clients
• To have good engineering solving skill sets when encountering failures in M&E systems

Requirements:

• Diploma/Degree in Facilities Management, Civil, Mechanical, Electrical, or related fields Institute.
• At least 3 years relevant experience
• CFME Accreditation
• Proficient in Microsoft Office (Excel, Word, Powerpoint)
• Good computer literacy/knowledge

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Job Description:

- Manage existing maintenance contract and lead efforts in preparing, analysing and negotiating of new contract.

- Chair regular contract performance meeting and maintain close communication with customer.

- Work closely with internal stakeholders (ie. Operation team) to ensure contract deliverables are met.

- Drive continuous improvement in work processes.

Job Requirements:

- Bachelor of Business, Law, Engineering or related disciplines.

- Preferably experience in contract management and knowledge in military equipment.

- Highly motivated individual who is able to work independently and lead a team.

Job Title: 6 Months Contract Robotic Software Engineer

We are hiring under Recruit Express headcount, and you will be deployed to:

Location: Jurong East

Pay: $6000 - $6500

Duration: 6 months contract

Working Hours: Normal Office Hours

Key Responsibilities:

DevOps:

• Develop and maintain CI/CD pipelines to automate the deployment of applications.
• Monitor system performance, troubleshoot issues, and ensure high availability and reliability of applications

ROS2 Integration:

• Develop and integrate software components using ROS2 for robotic systems.
• Work with robotic sensors, actuators, and control systems to enable seamless operation.
• Collaborate with robotics engineers to design and implement software architectures that meet project requirements.

Collaboration and Communication:

• Work closely with product managers, designers, and other engineers to gather requirements and deliver solutions.
• Participate in code reviews, design discussions, and team meetings to ensure code quality and knowledge sharing.
• Mentor junior engineers and provide technical guidance to the team.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• Minimum 2 years of experience in software engineering with a focus on frontend development and DevOps practices.
• Proven experience with modern frontend frameworks such as React, Angular, or Vue.js.
• Strong knowledge of DevOps tools and practices, including CI/CD, and containerization (Docker, Kubernetes).
• Experience working with ROS2 and integrating robotic systems.
• Proficiency in HTML, CSS, JavaScript, and Typescript.Familiarity with cloud platforms such as AWS, Azure, or Google Cloud.
• Strong understanding of software development methodologies and best practices

Interested applicants, please Email

Fabian Ling Tuong Liing

Email Address: [email protected]

Outsourcing Team

Recruit Express Pte Ltd

EA Licence No: 99C4599

We regret that only shortlisted candidates will be contacted.

Responsibilities:

• Play an important role in the compliance of REVIT MEP for BIM projects
• Plan and manage all aspects of REVIT MEP functions
• Evaluate and implement standard MEP templates and families creation
• Supervise and co-ordinate with Engineers and BIM Modelers on project set-up
• Provide in-house training programs for Engineers and BIM Modelers
• Attend meetings and collaborate with Client on BIM project

Requirements:

• Good knowledge and understanding of Autodesk REVIT Architecture / Structural / MEP software and Autodesk AutoCAD software / ACC Cloud
• Good knowledge and experiences in CORENET X submission requirements
• Able to work independently, self-motivate and resourceful
• Strong leadership with good people management skills
• Good written and spoken communication skills

Qualification:

• Diploma or Degree in Mechanical or Electrical Engineering / Building Information Modeling

Experience:

• Minimum 4 to 5 years of relevant working experience

Salary:

• Commensurate with qualification and experience

Interested candidates please apply with an updated and completed resume to [email protected] stating details of your education background/working experience, expected salary and availability. We regret only suitable candidates will be short-listed and notified.

Senior Software Engineer (Java, J2EE )/ Full Stack Java

Our esteem client is looking for a Senior Software Engineer (Java, J2EE )/ Full Stack Java to design and develop innovative software applications.

Requirements:

• Track record in handling Full Stack Java Development.
• Solid experience in handling "Java/ J2EE" Software application development.
• Strong in Software Design, Development and Support.
• Hands-on experience in system design & developing applications.
• Proficient in Java/ J2EE Software Programming language.
• Experience in handling Software Application development.
• Proven experience as a Full Stack Developer with experience with MEAN/MERN stacks.
• Strong proficiency in front-end technologies such as HTML, CSS, JavaScript (TypeScript)
• Design, develop, and maintain robust and scalable web applications.
• Develop and implement front-end design.
• Develop and implement back-end design and function.
• Involved in User ‘s Requirements Gathering, UAT and Testing.
• Understanding of web application architecture, stateless architecture, and design patterns.
• Minimum 8 years of industry experience with 5 software development lifecycles.
• Degree in Information Technology, Computer Sciences or related field.
• Propose and implement the right technical solution based on the client’s problem area and requirements

If you feel that you have the skill-sets that we are looking for, please apply in-confidence with an updated MS Word Resume to [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Description:

- Perform production assemblies and operate plant equipment in accordance to process sheets, approved procedures or operating work instructions

- Perform simple machine set-up

- Do in-process inspection in accordance to approved processes.

Job Requirements:

- Nitec in any engineering fields

The School of Civil and Environmental Engineering (CEE) is a leading school for Sustainable Built Environment. The School plays an integral role in spearheading tertiary education, advancing research innovations and providing professional services in a number of key disciplines in Civil and Environmental Engineering and Maritime Studies fields, with the objective of contributing to the technological and economic advancement of Singapore and beyond. The School’s mission in research is to achieve excellence by providing a conducive and intellectually stimulating environment to enable high quality work in strategic directions that are of significant impact to industry, science and technology.

For more details, please view School of Civil and Environmental Engineering | NTU Singapore.

We are looking for a Research Fellow to work on a project ‘Innovative structure systems for next-generation construction’. The role will focus on conducting experimental and numerical studies on novel joints for modular structures and developing new design methods.

Key Responsibilities:

• Conduct experiments on modular structures
• Conduct numerical modelling
• Assess existing design codes
• Propose new improved design methods

Job Requirements:

• PhD degree in Structural Engineering from reputable universities or related field
• Familiarity with Eurocodes on steel and composite structures
• Good written and oral communication skills
• Proficiency in hard skills / job-specific abilities acquired through training e.g. specific programming languages, numeric and analytical skill
• Competent in soft skills / general personality traits: Information visualization, interaction design
• Interpersonal skill: Ability to work independently / develop solutions under strict timelines, meticulous and eye for details / excellent organizational / time management skills)
• Entry level candidates are welcome to apply

We regret to inform that only shortlisted candidates will be notified.

System Engineer(FAT/OAT)

Our client is looking for a system engineer with expereinced in conducting Factory Acceptance(FAT) and On-site Acceptance tests(OAT).

Responsibilities

· Participate in System Engineering Design, Test Plan & Procedures

· Planning and Setting up Test Lab, conducting Factory Acceptance Test(FAT)

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults during On-Site Acceptance Test(OAT)

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

· Sourcing and Procurement of System Hardware

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Knowledge in MS office, Visio, Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is an added advantage

· Excellent Time management, Oral and Written Communication Skills

· Working location is in Jurong East

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with you updated MS Word Resume to : kelvin@starcareerconsulting.com

*We regret only shortlisted candidate would be contacted.

Kelvin Lee (Reg. No. R1872625)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Description:

• Set-up and operate automated/ manual assembly machine
  • Final and Components Assembly of Ammunition Product linking & Packing
  • Pressing (spitback assembly, cartridge case)
  • Labelling, packing & Palletizing.
• Handle/ Shift of parts/equipment involving the use of lifting equipment (lifting tables, pallet jacks, trolley, etc.)
• Meet daily production output
• Perform in-process inspection as per Process Sheet
• Keep record of production output and reject items
• Maintenance of the machines
• Perform daily housekeeping
• Adjust, repair or replace machine components
• General Ad-Hoc task assigned by the supervisor

Job Requirements:

• Excellent communication & interpersonal skills
• Team player and able to work under pressure
• Possess knowledge with automation machine for production.
• Must be able to do overtime and nightshift when required.
• Abe to comply with company policies, security regulation and EHS regulations

Purchaser duties and responsibilities

Qualified purchasers have to be competent in their responsibility for negotiating with suppliers and sellers of the assorted products and services that their own organization needs. They also need to coordinate the logistics of having them delivered and paid for. Their duties include the following:

• Sourcing suppliers based on price, availability, necessity, quality and logistical expenses
• Assessing vendors and their offerings with in-person visits, interviews and analysis to assess their quality
• Collaborating with various internal departments to ensure that they fulfill all customer requests
• Negotiating sale agreements and supply contracts in ways that benefit their company
• Coordinating with shipping agencies and sellers to ensure timely deliveries and oversee the integrity and quality of delivered goods and services
• Authorizing payments and managing purchasing expenses with meticulous record-keeping

• Inspects specific assemblies, onboard boiler repair, deck panels, and coverings, for conformance to dimensional specifications and quality standards, using level, square, and measuring instruments and applying knowledge of carpentry.
• Responsible to issue PTW for all site work
• Responsible and accountable to follow all Safety Procedures of the site.
• Performs In process sampling and testing.
• Performs simple maintenance jobs in accordance with safety requirement.
• Preparation of equipment for lock out tag out (LOTO), filter change outs etc.
• Report all accident, injury, near miss, unsafe conditions, and behaviour to immediate supervisor so that remedial actions can be taken to eliminate risk.
• Ensure utilities and facilities problems are identified and repaired quickly.

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for manual lathe machines and CNC machines
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

As part of the Talanx Group, HDI Global SE, Singapore has been one of the leading insurers offering a broad and needs-based range of insurance solutions and accompanying services for decades. HDI operates through foreign branches, subsidiaries and affiliates as well as network partners in more than 150 countries.

We offer our employees all of the advantages of an international company by providing an exceptional, modern working environment that constantly challenges and rewards. We promote high levels of internal and external communication and concentrate on achieving our goals through teamwork. We offer you the opportunity to contribute your own ideas and actively become involved in shaping the future of our company.

Due to our company's continued growth and expansion, we are now hiring the following position

Risk Engineer

We are currently looking for a well organised and self-motivated individual to join our team of 4 Risk Engineers to contribute to establishing, strengthening and promoting a market leading Risk Engineering practice for HDI Risk Consulting (HRC) in Asia and the Middle East.

Duties will include (but not limited to)

· Conduct General Property and Engineering Risk Engineering Surveys.

· Implementation of efficient loss prevention measures with the development of effective operational risk management procedures at client level.

· Establish a Risk Engineering Practice in line with HRC Standards.

· Implement HRC Risk Engineering tools.

· Evaluate loss potential in accordance with HRC guidelines.

· Desktop reviews of external risk reports as requested by underwriters.

· Provide reports in a timely manner in agreement with underwriters and in accordance with HRC Risk Engineering guidelines.

· Attend client presentations where required by the underwriting team.

· Develop close relationships with clients.

· Keep up-to-date with the latest technical developments in major industries and provide technical updates to underwriters.

Skills and Experience

· Approximately 7 or more years of risk engineering experience with an insurance company or fire protection consultancy firm.

· Appropriate formal Engineering Qualifications.

· Good understanding of internationally recognised fire protection system (e.g. NFPA, FM guidelines).

· Previous experience with semi-conductor industry would be advantageous.

· Professional involvement in Property and Engineering Risk Engineering.

· Strong communication skills.

· Willingness to travel

We offer a hybrid work arrangement, birthday leave, flexi benefits, annual bonus, private medical, dental & life insurance, a company trip, and an inclusive working environment. Interested candidates can either click the "apply" button or email their application along with their most recent CV to [email protected]

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Responsibilities:

• Attending site meetings with consultants.
• Study of Construction drawings details and coordinate with the consultants and sub-contractors to resolve any technical / site issues.
• Ensuring that works on site are carried out according to specifications / drawings.
• Inform Project Director or Project Manager on any technical / site problems arising.
• Supervising the progress of work on site.
• Reporting work progress to the necessary party.
• Coordination of sub-contractor’s work and ensuring that the work on site is on schedule.

Benefits:

• Performance bonus
• Company incentive trip
• Annual salary review

Requirements:

• At least a Bachelor's Degree in Civil Engineering or equivalent.
• At least 2 years of relevant working experience.
• Experience with A&A (Addition & Alteration) works is an advantage.
• Experience with government projects is an advantage.
• Offer is subject to experience and qualifications.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Your new company

Client is a public corporation seeking to hire a 2-year Mechanical Project Engineer.

Your new role

The role is to be based at Senoko, in Singapore. The role includes the planning and management of a programme of Mechanical and mixed trades projects carried out on the facilities operated and maintained by the company, ensuring that all work is executed on time and to budget/estimates and in full compliance with company standards and applicable legislation.

The Mechanical Project Engineer will have responsibility for all stages of development and implementation of several projects and/or engineering across the Singapore estate.

• Lead the management and inspection of Static Equipment to include pipelines, tanks, vessels, and associated equipment.
• Develop Mechanical scopes of work at concept, FEED, and detailed design level,
• Develop budgets and forecasts for programme of work,
• Liaise with other members of the Asset Technical Team on standards & codes,
• Produce detailed programme of works/Gantt charts etc,
• Working knowledge of COMAH, MOC, and CDM regulations,
• Previous experience of managing multiple site works.
• Supervise and function as client’s representative on tank inspection works

What you'll need to succeed

• Have extensive experience of leading direct and indirect technical engineering projects and Stakeholder groups / teams engaged in the delivery of complex projects within demanding time, quality, and cost constraints,
• Able to demonstrate good management / people relationship skills, in particular team management and dealing with Contractors,
• Solid understanding of good project management principles; able to act as an “intelligent client.”
• Working knowledge of current local legislation and best practice relating to industry such as API, EEMUA, ASME, ATEX, BS, PSLG, COMAH, CDM etc.

What you'll get in return
This is an exciting opportunity to join a public corporation in Singapore. You will be part of a dynamic team and you will be remunerated at market competitive rates.

What you need to do now
If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call Ernie at Hays on +65 6424 0157 or email [email protected] for a confidential discussion.

Referrals are welcome.

Registration ID No. R1329386 | EA License number: 07C3924 | Company Registration No. 200609504D