We require an experienced and skilled Assistant Electrical Engineer for our Solar Division. The ideal candidate should possess at least 10 years of experience in the industry.

Job Description

1. Ability to perform site assessment for Solar Projects.
2. Perform accurate system sizing calculations & shading analysis.
3. Run PVSyst repors for system production estimates.
4. Ability to work independently at site for all spectrums (Power, Lighting, Panel Terminations, Cable Routing, Busway, Public Address, Fire Alarm, CCTV).
5. Adept in risk management for Solar projects.
6. Perform Electrical, Mechanical and software component inspections, testing, repair and troubleshooting, in accordance to its specifications.

Job requirements

1. Possess at least a Technical Certificate in Electrical and/or Mechanical Engineering.
2. Must Possess at least 10 years of experience in Solar Projects with at least a 50-100MW installations.
3. Ability to manage the projects.
4. Able to commit to long hours when necessary.

Job Description

• Position is 24x7 AOG desk that requires shift work.
• Co-ordinate and control of components requirements from customer’s base station and liaising with customer on critical spares requests.
• Sourcing for spares availability.
• Coordinate with repair staff and purchasing staff on order status.
• Initiate loan/exchange/PO activities to support material shortages.
• Manage AOG requirements for local and overseas customers.
• Monitor of AOG / critical DSS requirements for C-Checks during off hours.
• Checking IPC /ACRT for P/N interchangeability.
• Liaise with internal departments, customers, freight forwards, and vendors if required.
• Data recording and digital documentation.
• Any other adhoc duties.

Requirements:

• Working experience in material management in the aviation industry would be an advantage. Candidates with experience in inventory management in other industries would also be considered.
• Strong analytical, interpersonal and communication skills.
• Good human relations skills.
• Ability to learn fast and willingness to take up additional responsibilities.
• Proficiency with SAP will be advantageous.
• Customer-centric with the ability to adapt to different types of characters.

SIAEC is proud to have received the 2024 'Gold Standard in Excellence in Talent Management & Acquisition Award' from the Singapore Human Resources Institute.

At SIA Engineering, we are committed to ensuring your personal information is protected and never misused. Personal data collected will be used or disclosed only for the purposes of your job application and potential employment with SIA Engineering, such as for assessing and evaluating your suitability for employment in any current or prospective position within the organization and verifying your identity and accuracy of the personal details and other information provided.

By submitting your application for this position, you consent to:

a) the collection, use and disclosure of your personal data by SIA Engineering for the purposes of your application and potential employment with SIA Engineering, including disclosing such personal data to any of SIA Engineering’s subsidiaries, affiliates or related corporations (if necessary for the processing of your job application); and

b) SIA Engineering’s retention of your personal data for 1 year for consideration of future job opportunities (where applicable)

We thank all candidates for your interest in SIA Engineering Company, and regret that only shortlisted candidates will be notified.

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Etch tools / equipment (AMAT / Mattson)
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Role:

Electrical Project Engineer / Licensed Electrical Worker

• Working Hours: Monday-Friday [ 830am - 530pm ]
• Address: Bukit Batok
• Salary: $3,500-5,000

Requirements:

• Degree in Electrical Engineering (Major in Power)
• Possess Class 3 driving license

Responsibilities:

• Preparation of technical specifications.
• Carry out site inspections on LT and HT installations per EMA requirements.
• Assist PE/ LEW to carry out switching of electrical panels.
• Standby and attend emergency call up services at customer installations.
• Prepare incident reports, technical proposals, etc.
• Site supervision of sub-contractors on maintenance works.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Job Title: Platform Operations Engineer

Purpose of the Role

The purpose of this role is to design and deliver best-in-class server, storage, and trading platforms for clients and internal infrastructure in line with company standards and strategic framework. The role requires collaboration with the Account Management, Project Management, and Client Service Delivery teams to meet the requirements of tier-one banks and other key clients. The ideal candidate is a proactive, solutions-oriented Engineer with strong organizational skills and attention to detail. The role also involves working closely with the Service Operations (NOC) Team to manage escalations effectively and share knowledge within the team.

Responsibilities and Duties (include but are not limited to):

• Design & Deployment:Design, deploy, and resolve escalated problems for global client server solutions.
  
• Collaboration & Problem-Solving:Collaborate with internal/external clients, operations teams, financial exchanges, and other engineers to design, automate, research, and develop system solutions. Participate in business analysis, issue investigation, and resolution.
  
• Platform Stability:Ensure stability of all company-managed platforms.
  
• Configuration & Implementation:Construct valid configurations for implementation based on design and technical concepts.
  
• Support & Maintenance:Support the deployment and maintenance of servers, storage, and systems management products.
  
• Configuration Management:Apply configuration changes through change control systems and processes.
  
• Peer Review:Conduct peer reviews of configurations scheduled for deployment.
  
• Production Changes:Perform production changes in a diligent and professional manner.
  
• On-Call Support:Participate in an on-call rotation for support escalations.
  
• Daily Meetings:Participate in daily meetings to review changes and discuss underlying impacts.
  
• Client Communication:Communicate effectively with clients and teams to manage project lifecycles.
  
• Mentoring:Provide mentoring and guidance to other team members when needed.
  

Education, Skills, and Background (Including Education and Experience Requirements):

• Minimum of 3 years of experience working on large-scale bare metal solutions in a service provider or large enterprise environment.
• Minimum of 2 years of experience with HP, Dell, and/or Lenovo Intel-based physical hardware.
• RHCE certified or equivalent level of knowledge.
• Advanced understanding and deployment experience in:Operating Systems: Linux/Unix
  Scripting: Bash and Python
  Network Services: DNS, DHCP, FTP
  IP Protocols: ICMP, UDP, TCP
  Configuration Management Tools: Ansible or similar tools
  Storage Solutions: SAN and NAS
  Volume Management: RAID and volume management
  Virtualization: VMWare and KVM
  
• Familiarity with WAN/LAN networking concepts and relational database technologies.
• Understanding of JIRA as a ticketing system.
• Diligent and highly detail-oriented.
• Strong analytical and diagnostic skills, especially in high-pressure financial environments.
• Clear verbal and written communication skills.
• Ability to prioritize and manage a high workload.
• Self-motivated and a driven self-starter.
• Willingness to contribute ideas, share knowledge, and support the development of others.
• Interest in cutting-edge technology.
• Commitment to continuous learning and skill development.
• Experience with trading infrastructure is advantageous.

Working Arrangements

This is a hybrid position. The role holder will participate in a shift rotation, working 5 days a week, covering the hours of 07:30 – 16:30 from Monday to Sunday (including at least one weekend day per week).

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description & Requirements

• Monitor contractors' daily activity, site progress, schedule and safety on site
• Carry out administrative works and other duties as required by QP/Superintending Officer/Consultant/Employer
• Review and check all the M&E drawings, specifications, and to ensure that works are carried out in accordance with the approved plans/drawings.
• Must familiar with Singapore code of practice (COP), regulations and statutory requirements.
• Highlight discrepancies, feedback site progress and non-conformances/irregularities to QP/Consultants/Employer.
• Assist in reviewing of contractor's method statements and working procedures and assure contractor followed on site.
• Prepare lists of defects, monitor the progress of rectification works and ensure all the defects are satisfactorily rectified.
• To ensure all the construction works have complied statutory requirements
• Preferbaly candidates with ACMV experience
• Must have M&E RTO certificate accredited by IES / ACE
• ACMV / HVAC experience will be considered
• Location near Changi Naval Base

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Work in construction sector

• Prepare shop-drawings and follow-up on subsequent comments.
• Attend project safety meeting and site co-ordination meeting.
• Arrangement of work with our site supervisors according to Builder's work program.
• Monitor materials purchase and delivery schedule.
• Implement variation work upon receiving new drawings and instructions
• Assist site staff in preparing as-built drawings, operation and maintenance manual.

• Prepare M&E works schedule based on the project master schedule
• Accountable for all M&E works, site inspections, monitoring of progress of work & variation order
• Responsible in ensuring that all M&E works of the sub-contractors are in compliance to the Company’s and authorities’ requirements
• Review M&E drawings and other materials submission prepare by the M&E Coordinators to ensure that there are no discrepancies and/or conflicts with the architectural and structural elements
• To prepare report for the Consultant Progress and Technical Meetings
• To coordinate with clients, consultants, sub-contractors and project team to ensure smooth delivery of work including resolution of design and construction issues
• Raise RFI/CVI with Consultants and Clients
• Advise PM on monthly work progress of sub-contractors
• Supervise M&E supervisor on all aspects of M&E works
• Compute variation orders for QS to settle with client/consultant
• Organize M&E items to be handed over to clients and compile items for submission to authorities.
• In addition to the above mentioned duties and responsibilities, any other assignments given occasionally or on a daily basis by the immediate Superior.
• Other ad-hoc assinged by the Company.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevSecOps Engineer

Internal Code: A24118

What will you do?

• Part of the project Enterprise Information Management team to take on the exciting and challenging role of delivering and maintaining an agency-wide data warehouse and analytics project using AGILE software development methodology.
• Maintain the organisation’s data warehouse and analytics platforms on both on-premise data centre as well as on cloud.
• Develop automation code for testing and deployment using Azure DevOps, Git and various testing tools for the data platforms.
• Liaise with both vender and inhouse team on data warehouse and analytics development platform including SQL databases, MS Sharepoint, Power BI, Tableau, Aurora PostgresSQL and Machine Learning applications on agency data centre.
• Perform automated deployments to existing or new infrastructure environments
• Build continuous integration and delivery pipeline for applications.
• Provide production support and operation for the system during office hours or as and when required after office hours or on weekends for scheduled maintenance and deployments.
• Work with the team to support existing system and integration of new components in the system.
• Maintain existing infrastructure which includes Windows-based servers, SQL databases, Power BI, Sharepoint, SQL Server Integration Services (SSIS), and Machine Learning Server.
• Plan, design, build and maintain development environment which includes SSIS, .net, Visual basic, SSMS, etc.
• Liaise with 3rd party software, hardware and application vendors to manage and resolve incidents and technical issues.

What are we looking for?

• Tertiary Education in relevant fields is preferred.
• Hands on experience in setting up and maintaining CI/CD platform, such as Azure DevOps, Git/Github or other related CI/CD tools.
• Hands on experience in writing automation scripts for automated deployment for ETL packages, database tables, and analytics programs using R and Python.
• Hands on experience in design, implementation, administration and support of data platforms such as SQL and Aurora Postgres database. Related certifications will be an advantage.
• Hands on experience in setting up and maintaining a data warehouse/lake solution on the cloud and in a data centre.
• Hands on experience in supporting Microsoft technologies, preferably for Business Intelligence and data management using tools such as Microsoft SQL SSIS, Power BI, R, SharePoint.

Experience in one or more of the following:

a) Building CI/CD pipeline using Azure DevOps, Bamboo, Bitbucket, Sonarqube, Fortify and Nexus

b) Building data pipelines using Python, AWS Glue, AWS Lambda, SQL Server Integration Services (SSIS)

c) Unix scripts for secure file transfers

d) Data security

e) Secure code review, Automated Testing

f) Big Data platform, AWS S3

g) Maintaining visualisation tools such as Power BI or Tableau, and Machine Learning applications

h) Server Virtualisation (VMWare VSphere family of products) and container technology

i) Data Virtualisation technology

j) Agile continuous integration tools

• Good team player.
• Passionate in championing the team to continuously improve and deliver quality software product.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior Engineer to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for both the UPW & Chemical Systems.

What you will be working on:

• Plan and execute preventive and corrective maintenance activities for chemical, slurry and gas systems including chemical waste collection systems to ensure maximum equipment uptime and reliability.
• Manage on-site Total Gas and Chemical Management (TGCM) and Bulk Gas Plant contractors to ensure excellence in operations, maintenance, quality standards and safety compliance.
• Respond to issue and perform troubleshooting with on-site TGCM team, Bulk Gas Plant operations team and contractors.
• Work with Manufacturing and Quality teams on excursion root cause identification, elimination and prevention.
• Initiate, evaluate, plan, design and supervise all improvement or upgrading or new projects for chemical, slurry, gas and chemical waste system.
• Include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, and code compliance.
• Work in a team effort with other engineering, operations, maintenance, and construction disciplines to provide detailed designs and specifications for the installation of new capital equipment and systems.
• Identify and implement new technologies for chemical, slurry and gas systems for process breakthrough.
• Carry out cost estimates, analysis, cost and schedule estimates as well as justification of proposed projects.
• Responsible for maintaining various administrative and engineering database in support of job tracking, engineering data, and costing.
• Provide support for new chemical and gas evaluations.
• Plan and execute specialty gas system release/unhooking.
• Review and improve Operation and Maintenance Standard Operating Procedure and Risk Assessment.
• Support ISEP and Facilities operations concerning chemical, slurry and gas management/operations/storage/maintenance works.
• Carry out FMEAs (Failure Model and Effect Analysis), eliminate single points of failure and mitigate risks.
• Analyze systems to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings.
• Work with Quality department to ensure the quality of chemicals, slurries and spec gas.
• Be aware of and perform all works in accordance with company safety guidelines.
• Benchmark with other Micron sites on operational, procedural, engineering, and design BKM of Facilities buildings and systems.

More About You:

• Master/ Degree in Chemical Engineering
• Min 4 years of relevant experience in Semiconductor Wafer Fab environment
• Hands-on experience in day-to-day operation and maintenance is essential
• Functional / Technical Skills and Knowledges:
• Operation and maintenance of Ultrapure Water, Wastewater, Chemical, Gas and Bulk Gas Systems

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description

· Handle Accounts Payable entries

· Checking monthly supplier statements and reconciliation

· Clear queries from business units and suppliers

· Email payment advice to suppliers

· Check and process staffs’ claims

· Ensure adherence to the accounting processes and policies

· Other duties as assigned

Requirements:

· Only for Singaporean

· Experience in accounting, good knowledge of Excel

· Ability to work independently

· High degree of accuracy and attention to detail

Responsibilities:
• Manage and automate business processes and workflows on IBM CMOD/OnDemand platform for banking services and applications.
• To develop Content Management Platform Dashboard for operations and migration purpose and enable the self-service API for Operation automations.
• Develop and maintain OnDemand solutions using full stack development with Java to automate systems administration, engineering, and operations tasks.
• Optimize systems and infrastructure using SREOps/DevOps practices like automation, monitoring, and continuous integration/delivery.
• Develop software solutions by analysing information needs, conferring with cross functional and users, studying system flows, data usage and work processes, investigating problems and heavily involved in following the software development lifecycle.
• Develop high-quality and detailed designs on end-to-end software development life cycle.
• Conducting unit testing using automated unit test frameworks.
• Identifying risk and conducting mitigation action planning.
• Continually create, improve and re-engineering Build and Delivery Pipelines, CI/CD workflows, build and deployment based on the Content Management Platfrom needs.
• Design, develop and maintain the interfaces from internal and external applications and optimize the existing workflows across multiple systems.
• Determines operational feasibility by evaluating analysis, problem definition requirements, solution development and proposed solutions.
• Documents and demonstrates solutions by developing documentations, flowcharts, layouts, diagrams and charts, code comments and clear code.
• Prepares and installs solutions by determining and designing system specifications, standards, and programming.
• Improves operations by conducting system analysis recommending changes in processes and procedures.
• Provide information by collecting, analysing, and summarizing development and service issues.
• Accomplishes team objectives by completed related results as needed.
• Support other Developers by providing advice and by working on issues collaboratively.

Interested candidates may apply through the application system. Shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R23111944 (Loh Hui Ru Clara)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

• Administrative Support: Provide general administrative support, including managing phone calls, emails, and office supplies.
• HR Records Management: Maintain and update employee records in the HR system, ensuring accuracy and confidentiality.
• Staff Welfare Coordination: Help organize employee welfare activities, including staff events and recognition programs.
• Document Preparation: Prepare HR-related documents, such as employment contracts, letters, and reports.
• Compliance: Ensure compliance with company policies and local labor laws, assisting in audits and other regulatory requirements.
• Other Duties: Perform additional tasks as needed to support HR and administrative functions.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Civil Engineer (Civil Construction)

(LTA project experience required)

5.5 days work day at East area

Primary Roles

• Plan, prioritize and manage assigned projects, involved in the areas of pre-planning, budgeting, resources allocation, contract negotiation, drawings submission, progress claim, and worker coordination, to ensure that the team’s resources are used effectively and project deadlines are met.
• Supervise construction site personnel and subcontractors, client & consultant, attend weekly project progress meetings, and monitor compliance with building and safety codes and regulations.
• Ensuring the timely, budget control, and cost-effective completion of construction projects.

Key activities

Project Planning

Responsible for creating a comprehensive project plan that outlines the project's objectives, scope, deliverables, timeline, and resource requirements. They collaborate with stakeholders to define project goals and develop a roadmap for project execution.

Risk Management

Identify potential risks and develop strategies to mitigate them. Conduct risk assessments, create risk management plans, and implement risk response strategies to minimize the impact of risks on project outcomes.

Schedule Management

Develop project schedules, defining tasks, dependencies, and timelines. Monitor progress, track milestones, and identify any deviations from the planned schedule. If necessary, adjust keep the project on track.

Quality Assurance

Ensure that project deliverables meet the required quality standards. Define quality criteria, establish quality control processes, and conduct regular inspections and reviews to monitor and improve the project's quality.

Reporting and Documentation

Responsible for generating regular progress reports and status updates for stakeholders. Document project activities, decisions, and outcomes to create a comprehensive project record.

Stakeholder Management

Identify project stakeholders and establish effective communication channels with them. Engage stakeholders throughout the project, manage their expectations, and address any concerns or issues that may arise.

Change Management

Handle changes that occur during the project lifecycle. Assess change requests, evaluate their impact on the project's scope, timeline, and budget, and implement appropriate change management procedures.

Continuous Improvement

Evaluate project performance and conduct lessons learned sessions to identify areas for improvement. Use feedback and insights gained from completed projects to enhance project management processes and practices within the organization.

Requirements:

Minimum a Bachelor's Degree in Civil Engineering with PE Board recognized

Minimum 3 years construction experiences in Singapore especially in Civil & Infrastructure works

Knowledge in project management methodologies

Good organization & Time Management

Strong Analytical & problem-solving abilities

Adaptability and Flexibility

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Associate Engineer to be part of our Furnace Equipment department diverse team of talents.You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Furnace Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description:

• To review customers’ design and documents (CAD data, drawings, specifications, etc.) for better manufacturability and to provide proposals/feedback or seek clarifications from customers.
• Perform process planning, generate part arrangement, Cam editing instructions and production documents for manufacturing processes.
• Liaise with Cam section on generation of soft toolings to support production.
• Liaise with tooling vendors on fabrication of hard toolings.
• Perform initial DFM review prior to confirmation of customer’s design or order.
• Work with Material Planners and Purchasing on the processing and material positioning for the product.
• To monitor and follow-up on production feedback via Engineering Change Request and to take the appropriate actions to implement upon appropriate approval process.
• To handle customer inquires/problem solving matters on engineering related issues.
• To maintain proper documentation and filing of parts tooled or reviewed.
• Support company’s continuous productivity and quality improvements (e.g. panelization utilization improvements, process flow simplification, update department checklist/guides, etc.).
• To conduct technical training to relevant staff as and when necessary.
• Work with Process and Development Engineering Teams on process capabilities, design guidelines and new product developments.
• To carry out any other tasks assigned by superior.

Job Requirements:

• Min Degree/Diploma in Electrical/Electronic/Mechanical Engineering
• Familiar with Cam and In-Plan system (Genesis etc)
• Good communication skills
• Meticulous
• Familiar with Microsoft Office

Connect Energy partners with a Maritime company to look for a PROJECT ENGINEER to based in their Singapore office.

This position is to assist the technical team in managing document control for the MOPU's (Production Rigs), FSO's, Flag and Class Certifications, Insurance Certificates. This role will also assist in preparing technical requirements, liase with contractors and suppliers, review invoices and purchase orders and requests.

Major Responsibilities

• Manage Document Control System
• Support technical and engineering personnel with project support duties.
• Compiles technical reports
• Provides input to technical reports, project planning
• Produces accurate statistics, relevant figures
• Undertakes data analysis, identifies and investigate variations
• Prepares technical drawings, datasheets and documents under the diretion of the Technical lead
• Develop and maintain technical databases and spreadsheets
• Sources technical documents, information and drawings.

Requirements

• Degree in Engineering
• 3 - 5 years relevant experience in engineering and project management role in marine industry that focus on FSO / MOPU or equivalent.
• Excellent skills in MS application
• Advance use of MS Office, Excel, Powerpoint, Word, MS Project
• Meticulous in work.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at Coleman St, The Adelphi, Singapore (City Hall), may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / construction experience.

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team:

Our team's responsibility is to use the most cutting-edge technology to create the best search engine products.

The vision is to support development of TikTok's overall business, efficiently linkage users and information, help users solve problems, and become the preferred short video search engine for users around the world.

Job description

- Responsible for the front-end research and development of the Search Cloud Platform's business;

- Participate in the construction of the front-end engineering system of the Search Cloud Platform;

- Responsible for user experience, efficiency, and stability, and provide solutions from a front-end perspective.

Qualifications

Minimum Qualification

1. Computing related major, bachelor degree or above.

2. Proficient in front-end technologies such as JavaScript/HTML/CSS, understand the operating principle of the browser, and be able to develop independently without Front-end libraries;

3. Familiar with front-end mainstream frameworks, JS libraries and related ecological tools, such as: React/Vue/AngularJS, etc., understand their design principles and application scenarios;

4. Familiar with front-end engineering and modularisation development, and have experience in large-scale application development and maintenance;

5. Familiar with various front-end related debugging and testing tools, and have independent problem-solving skills;

6. Familiar with front-end and back-end collaboration mode, have good abstract thinking, and have a certain understanding of algorithms and data structure;

Preferred Qualification

1. Passionate about learning, enthusiastic about technology, and good technical sensitivity;

2. Have good communication skills and teamwork spirit, strong sense of responsibility, positive and optimistic attitude;

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Physical Design Engineer

Experience : 5+ Years

Salary Range :SGD 7000-10000

Skills & Technical Expertise Required:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

Worked on multiple tapeouts on Netlist to GDSII

Hierarchical partitioning and budgeting of block-level subsystems.

Implementation of high performance (HP) cores, low power designs

Node experience upto 3nm,7nm, 10nm, 14nm, 28nm.

Timing Signoff in loop through STA and ECO cycle at block and at interface.

Block level floor planning, power planning and IR drop analysis.

Scan chain reordering / Scan Chain repartitioning

CTS expertise and clock tree constraints creation for meeting specifications

MMMC optimization at Block and Sub-System Level

Timing closure with Crosstalk and AOCV / POCV

TCL scripting to fundamentally understand tool usage.

Mandatory EDA Skills

PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Job Description

• Be responsible for managing day to day lifting operations
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities
• Conduct routine checks and inspections of works on site to ensure compliance with authorities' and client’s requirements

Requirements

• Must have IES certificate
• Must have at least 3 years of experience as lifting Engineer
• Able to start work with short notice