Job Description:

1. Preparation of design calculation sheets, design & construction drawings, and any other
related documentation
2. Receive approvals from relevant Authorities and/or Employers
3. Prepare concrete design calculations such as bridges, drainage culverts, and retaining
walls
4. Prepare steel structural design calculations such as steel bridges, and temporary sheet
piles
5. Prepare settlement/consolidation calculations
6. Prepare slope stability calculations
7. Prepare construction planning & management for the works such as reclamation,
dredging, soil improvement, soil investigation, ground compaction, piling, steel
fabrication, and concrete, etc.

Job Requirements:
1. Bachelor of Engineering in Civil/Geotechnical Engineering
2. Design experience such as piling foundation, drainage, Earth Retaining Stabilizing
Structure (ERSS), soil improvement design (PVD, DCM, sand pile, gravel pile), ECM, Gravity wall, FEM, Slope stability
3. Familiar with the latest design standards such as Eurocode, British standards, ACI, ASCE, PIANC, CIRIA etc.
4. Well-versed in software e.g. Auto CAD, Microsoft Word, Excel, Power Point, Geoslope, PLAXIS etc.
5. Contract duration of 3 years
6. 5.5 days' workweek
7. Project site located at Woodlands

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

• Responsibilities:
• Handle project planning and implementation of project management to ensure timely delivery.
• Manage project costing and project billing/claim
• Preparation and submission of drawings or documents.
• Monitor site progress and arrangement of work activities.
• Attend co-ordination meeting.
• Prepare progress report, project claims and relevant documents for monthly event.
• Liaise / Meeting / Coordination with clients, contractors and supplier.
• Manage of Project Schedule
• Requirements
• Diploma or Degree in Mechanical and/or Electrical Engineering of equivalent
• At least 1-2 years of working experience in Mechanical & Electrical works
• A team player with proven leadership/supervisory skills.
• Good analytical, communication and interpersonal skills.
• Strong hands-on skills.
• Result orientated in a fast pace and multi-task environment.
• Knowledge of autocad is an added value
• Knowledge of authority requirement in Green Mark and GESP contract
• Knowledge of measurement & verification standard in Singapore

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Oversee the installation, testing, and commissioning of piping systems on-site
• Ensure piping installations meet project specifications, codes, and standards
• Address any on-site technical issues related to piping and provide solutions
• Coordinate with contractors, suppliers, and other engineering teams to ensure timely and efficient execution of piping work
• Conduct inspections and tests on piping systems and prepare documentation
• Maintain records of piping activities, including work progress, testing, and inspection reports
• Any duties to be assigned from time to time

Pre-requisites

• Bachelor’s Degree in Mechanical Engineering
• Minimum 5 years experience in a similar role
• Candidates are required to have prior experience in power and/or industrial plant projects
• Proactive learner and ability to multi-tasks
• Ability to adapt to dynamic and challenging construction site environments
• Project Location: Jurong Island

A PROCESS AUTOMATION ENGINEERING COMPANY IS LOOKING FOR AN AUTOMATION ENGINEER

REQUIREMENT:

- DIPLOMA / DEGREE IN ELECTRICAL POWER AND CONTROL

- A GOOD KNOWLEDGE AND EXPERIENCE IN PLC PROGRAMMING AND TROUBLESHOOTING

- MIN 5 YEARS OF WORKING EXPERIENCE

JOB DESCRIPTION

- PLC DESIGN / PROGRAMMING

- TROUBLESHOOTING

- TESTING, COMMISSIONING OF EQUIPMENT / MACHINERY FOR FOOD & BEVERAGE, CHEMICAL INDUSTRIES ...

Job Description:

• Supervision for soil investigation (SI) / soil improvement work (SIW), Planning and scheduling for SI/SIW
• Preparation of the relevant documents such as Method statement, Daily/Weekly/Monthly report, RFI, Shop Drawings/ As-Build Drawings etc.
• QA/QC of SIW material
• Preparation of claim document for client/ Claim document check from subcontractor
• Checking and evaluation for SI test results

Job Requirements:

• Bachelor of Civil Engineering
• Well-versed in software e.g. Autocad/ Microsoft Word, Excel, PowerPoint etc.

• To Assist Project Manager for coordination with the Architect and Consultants for Construction and Design Matter
• ERSS Construction sequence study and Plan
• Construction Management and Administration
• Construction Planning and Programming
• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the Project Manager and other project participants and collaborating with Senior Engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.
• Responsible in overseeing drawing management and make sure the updated drawings to the clients and subcontractor are issued.
• Assist the project manager or senior project engineer in coordinate with related consultant and quantity surveyor on the change order issued
• Coordinate and work closely with safety personnel to ensure all government and safety regulation are complied.

An engineering company is looking for Mechanical Engineer/ Processing Engineer

Job description

• to perform design and project management
• - supervision of site installation
• - co-ordination with customer and contractor

Requirement

• - Diploma / Degree in mechanical or chemical engineering
• - 3 years of working experience in process and equipment design calculation, equipment selection, and layout
• - Good knowledge of piping, pressure vessel, and tank design

Job Description:

• Preparation of construction schedule, monitoring of production and subcontractor's work progress.
• Able to handle with technical method statement.
• Resolving of technical matters and geotechnical issue.
• Submission of progress claims & variation order.
• Cost control measures & wastage control.
• Arrange work progress records.
• Preparation & submission of relevant documents to contractors.
• Able to attend to contractors' queries and comments.
• Attending of site progress meeting.
• Coordinate with Professional Engineer (PE) for PE Endorsement which includes test pile, trench stability, working platform, COS & etc.
• Prepare official letter to Main-contractor to record standby period, EOT claims, variation order, obstruction record
• Summarize diaphragm walls and bored pile panel record.

Requirements:

• Degree in Civil Engineering or relevant studies.
• Working experience in foundation works such as diaphragm walls and bored piles would be an advantage.
• Construction site working environment.
• Fresh Graduate are welcome to apply.

We are seeking a highly skilled Senior DevOps Engineer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package. Hybrid working arrangement.

Responsibilities:

• Design, implement, and maintain CI/CD pipelines to automate software build, test, and deployment processes.
• Implement monitoring solutions and manage monitoring and alerting tools.
• Providing DevOps architecture implementation and operational support
• Maintain configuration management, build, continuous integration, and deployment tools.
• Source code management and collaborate with development teams on branching strategies and versioning.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Streamline operational tasks, monitoring, and infrastructure provisioning.
• Design and implement production infrastructure architecture based on application requirements, ensuring scalability, availability, and security.
• Integrate security best practices into the software development lifecycle and ensure compliance with relevant standards and regulations.
• Prioritize and execute tasks in a high-pressure, fast paced environment.

Job Requirements:

• Singaporean only.
• Bachelor’s Degree in IT, Computer Science, or related fields.
• Knowledge in lots of different open source technologies and configurations.
• Minimum of 5 years of relevant DevOps experience, with expertise in automation, containerisation and orchestration .
• Prior hands-on experience in handling highly scalable distributed system, configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Proficient in containerization technologies such as Docker and Kubernetes.
• Proficient in configuration management systems (Terraform, Packer, Ansible).
• Proficient in AWS (Related certification will be advantageous).
• Strong scripting skills in Python, Bash, JavaScript and shell scripting.
• Working experience in Agile environments or projects (Scrum/Kanban).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

To further strengthen our team, Global Customer Support are looking for a Service Engineer to join us at Kongsberg Maritime here in Singapore. As a Service Engineer, you will have the responsibility for installation, service, and maintenance of KONGSBERG’s Tank Gauging, Loading and Stability Systems onboard sailing ships and in shipyards, as well as offer in-house technical support and remote service to customers and colleagues around the world. Within the Tank Gauging, Loading and Stability Systems product range, we have systems such as Cargo Monitoring and Control system, Sensor Reliability Application, Custody Transfer System and numerous sensor applications for monitoring of Cargo tanks.

Responsibilities:

• Installation & commissioning of Kongsberg Maritimes Tank Gauging Loading and Stability Systems.
• Provide service & maintenance onboard vessels worldwide
• Technical support and on-call/remote service
• Engage in product innovation, development and sales support activities.
• Cover service activities in South East Asia and maintain good relationship with existing clients
• Required to undertake ad-hoc duties which may be assigned from time to time.

Requirements:

• Diploma or Degree in Electronics/Mechatronic/Instrumentation Automation: Relevant experience may compensate for lack of education
• Must have excellent co-operative skills, good communication skills, result-oriented, self-motivated and the project-management skill
• Relevant experience in the maritime industry, especially with onboard Automation and Cargo tank gauging systems.
• Experience with control systems and cargo monitoring is a plus.
• Good oral and written communication skills in English
• Highly motivated for worldwide support activities (travelling is required)
• Self-driven attitude to find solutions to problems.
• Passion and patience for handling customers – Service oriented
• Contribute to a good and positive working environment.
• Act on own initiative, make things happen and accept responsibility for the results.
• Use a methodical and systematic approach, plan ahead and define clear priorities.
• Communicate in a clear, precise and structured way.
• Co-operate well with others and share knowledge, experience, and information

Only shortlisted candidates will be notified for interview.

Interested applicants, please apply via https://www.kongsberg.com/careers/vacancies/field-service-engineer---tank-level-gauging-systems/

Responsibilities

Provide Leadership to the Electrical engineering team to comply with project requirements and to meet project schedules.
Lead and prepare overall concept.
Lead, prepare, & review Request for Quotations (RFQs) and specifications. Lead EPC tender as the lead for Electrical.
Review technical proposals from OEMs to ensure compliance to our design requirement.
Plan & Manage the Electrical Master document List.
Plan & Manage manpower loading.
Review cable routing, BOQ, lead engineers and drafters.

Lead the engineering design of the following activities:
Design of 230kV, 66kV, 6.6kV & LV power supply system including; Sizing of Power Generation System, transformer, UPS & DC systems.
Articulate the overall Single Line
Understand & explain Power system Analysis by ETAP
Understand & explain Protection coordination
Calculate Cable Size
Understand & explain HV, MV and LV distribution & motor starter system
Understand & explain UPS & DC system
Understand & explain Solar generation system
Understand & explain Power Management System
Plan & coordinate Electrical Room layout
Understand, explain, plan & coordinate Cable and Busduct Management System

Familiar to the following Equipment and System;
Steam/Gas turbine generator
EDG (Emergency diesel generator)
GCB/TCB/UCB
GSUT/UAT/AT
MV/LV VSDs
IPBD/SBPD/LV Busduct
HV/MV/LV Switchgear and MCC
Civil interface for switchboard installation, pull pit and penetration.

Requirements

At least 10 years of relevant experience as Leader or Senior Electrical Engineer in EPC project for Power, Petrochemical and/or Waste-to-Energy plants
Bachelor’s degree in electrical engineering or equivalent
Strong background in EPC projects Strong leadership & people management
Familiar with industrial standard, e.g, ISO, IEEE, and etc. and Singapore standard, e.g SS638
Familiar with statutory Regulation or Code, like Singapore transmission code. etc.
Able to work in collaboration with various disciplines
Able to interface seamlessly with engineering, construction, and operations contractors

Able to work on-site in construction environment

Work location: Tuas Nexus

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

We are looking for experienced Marine Service Engineer, well versed in PLC/ DCS, to assist us on troubleshooting, automation and other services for marine equipment onboard ships.

The candidate will provide high-level engineering service and consultancy to our ships through our Singapore and overseas offices and supported by our various partners from Europe and USA to maintain marine equipment through it's life-cycle.

Required skill(s):

• PLC programmable logic controller programming, DCS, Boiler, Automation prefered
• Experience in Marine Equipment engineering, namely boiler, compressors, pumps prefered
• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering
• (Electrical/Electronic) or equivalent.
• At least 5 year(s) of working experience (Senior) , 1-2 year(s) of working experience (Junior) in the related field is required for this position.
• Candidates can expect a dynamic and autonomous environment where self discipline and passion in your job is a must.
• Applicants must be willing to travel globally
• This is a full time position open to all ages. We are open to work with senior engineers who are semi-retired
• Full-Time position(s) available.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

General Overview

The incumbent will provide 1st level end user support and involve in the 2nd level support for the infrastructure services. He will also perform daily server room operation and support site related projects. This position will be based at Jurong Island.

Roles and Responsibilities

1st and 2nd Level Support

• Laptop/desktop support, file & print services, network connectivity, LAN\WAN, PABX, Office365 and basic application troubleshooting.
• Escalate issues to 2nd level support staff/vendor if issues cannot be resolved.
• Participate in Out-Of-Office-Hours support on-call standby roster for handling 2nd level support for critical infrastructure services.

Systems and Cloud Administration and Maintenance

• Provide Storage, Networking, Wintel server, Active Directory, and database administration.
• Liaise with external vendors for any related hardware/software maintenance and services.
• Perform Installation/Configuration/Monitoring/Patching/Upgrades of servers, operating systems, databases and other system related software.
• Ensure all vulnerabilities are patched on a timely basis.
• Perform disaster recovery testing.
• Manage cloud resources and integration.
• Responsible in implementing network and systems security hardening in compliance to security baseline.
• Manage AWS resources network traffic using security groups.
• Administer SDDC NSX of VMware Cloud on AWS.

IT Governance and Documentation

• Regular review of infrastructure policies, procedures, security hardening and system documentation to ensure compliance.
• Manage and account for all IT assets and licenses.

Project Management

• Undertake infrastructure and cyber security related projects as assigned by reporting manager.

Requirements

• Degree in Computer Science, Information Technology, Computer Engineering or equivalent.
• At least 5 years of relevant working experience.
• Strong hands-on experience with Cisco routing and switching, Linux, SAN storage, Firewall/VPN and AWS/Azure cloud.
• Experience with Windows Active Directory, VMware ESX/vSphere/vCentre, Internet proxies, Anti-virus and security principles.
• Knowledge of applicable IT security, confidentiality and data privacy practices.
• Experience in setting policies, procedures, network software and hardware standards and documentation standards.
• CCNA/CCNP/MCSE or equivalent certification will be advantageous.
• Possess good project management qualities and able to work under pressure and tight deadlines.
• Strong analytical logic and problem troubleshooting skills with initiative and self-motivation.
• Knowledge with network and systems security hardening benchmarks.

For interested applicants, please apply via SLNG website at Careers (slng.com.sg).

As an Automation Systems Engineer, you will work directly with customers to define functional requirements and design, configure and implement control systems, software prohrams, electronic circuitry or packing for products or systems.

Description of work:

• Work in a team environment with engineers and designers from RoviSys, partners and clients to provide state of the art Control Systems to improve efficiency, product quality and profitability of process manufacturing.
• Design Electrical Panels, Control Architecture, and wiring drawings.
• Develop and build solutions using different industrial applications.
• Development of P&ID documentation for process clients.
• Define and implement Programmable Logic Controller (PLC)/Ladder Design, Distributed Control System (DCS) configuration to meet client needs.
• Execute and lead services such as system upgrades, system support and routine maintenence.
• Implementation of industrial application based on solution architect and technical lead's design.
• Testing and on-site commissioning of control systems.
• Support of process control clients at sites in Singapore and abroad.
• May grow into position leading team of engineers and technicians to provide control system solutions for clients.

Control Systems knowledge:

• Electrical design and Process Control fundamentals.
• Familiar with Controllers, such as single loop control, PLC, DCS, DDC or PC based control.
• Exposure to Control Theory and some process understanding is helpful but not required.
• Platform knowledge in Rockwell Automation, Siemens, Emerson, DeltaV, etc.
• Process understanding of batch or continuous process control, combustion control, etc.
• Awareness of process safety, validation, and good documentation practices.
• Programming languages: PLC ladder logic, Function Block, SFC VB.
• Third party HMI/SCADA Software, i.e. Intellution, WonderWare, OSIsoft, etc.
• Others: network design/administration.

Qualifications:

• Self-motivated, with excellent communication skills and enjoy working with people.
• B.S in Engineering, Physics, or related fields.
• Process or Industrial experience is a plus.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
• Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner.
• Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
• Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

We are looking for DevOps Engineer to join one of the Government Agency!

• Great working environment and learning exposure in latest technologies
• Opportunity to handle large scale public facing project
• Attractive salary package & employment benefits (up to 24 days leave, medical insurance etc)

Responsibilities:

• Manage the development of the internal engineering productivity tools and environments.
• Providing DevOps architecture implementation and operational support
• Architecture and planning for cloud deployments (Private and Public cloud)
• Be an innovative and hands-on DevOps engineer capable of looking at both the technology and strategy around the platform.
• Future-proofing the technical environments and ensuring extremely high levels of automation, availability, scalability and resilience.
• Manage the development of the internal engineering productivity tools and environments.
• Manage processes, automation, best practices, documentation.
• Development and operation of continuous integration and deployment pipelines.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Ability to conduct research into software issues and products as required
• Working with the latest tools and techniques
• Hands-on coding and mentoring, usually in a pair programming environment
• Working in highly collaborative teams and building quality environments.
• Ability to effectively prioritize and execute tasks in a high-pressure, fast paced, global environment
• Knowledge in lots of different open source technologies and configurations.

Requirements:

• Min 4 years of experience in Devops automation, containerisation and orchestration using tools like Kubernetes, Terraform, Ansible and Docker
• Strong scripting skills: Python, Bash, JavaScript
• Cloud computing deployment and management experience - AWS

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui - R2090138

ScienTec Consulting Pte Ltd - 11C5781

• Degree in Mechanical/Electrical Engineering
• Minimum 2 years’ experience in engineering manufacturing industry
• MUST be proficient in using AUTOCAD software – Solidworks
• Proficient in Microsoft office
• Good interpersonal skills, problem-solving and project management skills
• Supervision of construction works and co-ordinate with client’s representation, consultants and sub-contractors on technical issues
• Prepare detailed M&E drawings, shop drawings, and As-built drawing
• Study production & machine requirements
• Assures product quality by designing electrical testing methods; testing finished products and system capabilities
• Evaluates electrical systems, products, components, and applications by designing, applying knowledge of electricity and materials
• Technical documentation and reporting

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

• Lead the team in executing electrical work during the construction phase, including cable tray installation, cable pulling, panel installation, cable termination, and testing/commissioning for MV/LV switchgear, transformers, UPS, DCIS/HMI, etc.
• Monitor and inspect construction activities to ensure compliance with design documents.
• Manage a team comprising supervisors, sub-contractors, and vendors.
• Responsible for electrical interfaces with the operational team, conducting meetings, and providing technical clarifications.
• Investigate and troubleshoot electrical switchgear faults or failures, implementing effective corrective and preventive actions.
• Analyze and enhance equipment reliability to prevent recurrence, collaborating with operation groups and external contractors.
• Prepare documentation for maintenance work, ensuring compliance with safety standards, and utilizing appropriate Method Statements and Risk Assessments, meeting BCA requirements.
• Collaborate cross-functionally to ensure systems, equipment, and rooms align with internal customers' needs.
• Review inspection and testing plans for electrical and instrument system installations through relevant checklists.
• Coordinate with stakeholders to ensure the smooth completion of projects.