Job Responsibilities:

· Design and implementation of mixed signal CMOS IP. Development cycle including circuit design, simulation, modeling, verification and bench characterization.

· Management products utilizing leading edge sub-micron CMOS technologies, e.g., 5/6nm

· Developing state of the art high speed mixed signal IP products that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, DC-DC converters, and high bit-rate (Gbps) Serdes TX/RX.

Requirements:

· Bachelor or above degree in Microelectronic or Electronic and Information Engineering

· 5 years or above experience in the area of analog design

· Good knowledge in analog IC design in high speed Serdes, e.g., PLL, CDR, CTLE/DFE, TX driver etc.

• Solid understanding and experience in key analog layout considerations such as device matching, parasitic, noise coupling, floor planning, sensitive signal routing, current density and reliability considerations
• Familiar with SPICE simulation tool (e.g., Cadence spectre, Synopsys Custom Compiler, Calibre)

· Strong Communication skills, high level of independence, self-motivation and good team player

Job Description & Requirements

• Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices
• Carry out independent design checks for temporary formwork and formwork support system
• Keep quality records of all works, monitor and report on work progress
• Review and comment on contractor's submissions
• To review and supervise safety, environmental and health matters
• Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects

Requirements:

• Experience in Underground work/ viaduct work
• Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS
• Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project
• Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations
• Good analytical ability with strong verbal and written communication skills
• Independent, organized with positive work attitude

Working Location:

• LTA / PUB projects

As an Electrical and Electronic Engineer, you will be responsible for designing, developing, testing, and maintaining electrical systems and electronic equipment. This includes working on components such as circuits, microprocessors, sensors, power generation and distribution systems, and control systems, applying your technical expertise to meet the needs of clients, manufacturers, or specific industries.

Key Responsibilities:

• Designing electrical circuits and systems.
• Creating schematics and layouts.
• Selecting appropriate components and materials.
• Conducting electrical tests and simulations.
• Ensuring designs comply with regulatory standards.
• Collaborating with other engineers to integrate electrical and electronics systems into products.
• Troubleshooting and resolving design issues.
• Preparing technical documentation and reports.
• Managing and maintaining design files and databases.
• Staying current with advancements in electrical and electronics engineering and technology.
• Performing any other tasks assigned.

Key Skills & Qualifications:

Education: Bachelor's degree in Electrical Engineering, Electronic Engineering, Mechatronics, or a related field. A Master's degree or higher is often preferred for senior roles.

Technical Skills:

• Proficiency with electrical engineering software (e.g., AutoCAD, MATLAB, LabVIEW, PSpice, etc.).
• Solid understanding of circuit design, PCB layout, and embedded systems.
• Experience with power electronics, automation, and control systems.
• Familiarity with microprocessors, sensors, IoT devices, and communication protocols (e.g., Bluetooth, Wi-Fi, SPI, I2C).
• Understanding of signal processing, analog and digital electronics.
• Problem-Solving & Analytical Skills:Strong troubleshooting and analytical skills to identify and resolve complex electrical and electronic issues.
• Soft Skills:Excellent communication skills for documentation and reporting, as well as client interaction.
• Ability to work collaboratively in team environments, especially in cross-disciplinary teams.
• Strong time management and organizational skills

Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices

Carry out independent design checks for temporary formwork and formwork support system

Keep quality records of all works, monitor and report on work progress

Review and comment on contractor's submissions

To review and supervise safety, environmental and health matters

Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects

Requirements:

Experience in Underground work/ viaduct work

Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS

Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project

Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations

Good analytical ability with strong verbal and written communication skills

Independent, organized with positive work attitude

Company:

Sopra Steria is a listed European tech leader specializes in Consulting, Digital Service, and Software. We have 60,000 employees worldwide located in different regions (Europe, North America and Asia), whereby Singapore is the HQ for APAC. EvaGroup Asia Pacific is part of Sopra Steria I2S APAC, in charge of Infrastructure, Cloud and Cybersecurity services.

Responsibilities:

Managing and Operating Red Hat Platform Operations Day 2:

• Red Hat Enterprise Linux
• Red Hat Identity Management
• Red Hat Satellite
• Red Hat Ansible Automation Platform
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Minimum 3 years of hands-on experience with Red Hat Enterprise Linux administration.
• Familiarity with security tools and protocols in a Linux environment.

Preferred Qualifications:
Red Hat Certified Engineer (RHCE) or Red Hat Certified System Administrator (RHCSA).

Job Description:

• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Ensure the smooth operation of the MES software and its integration with other systems such as ERP systems
• Identifying opportunities for process improvement and optimisation within the manufacturing environment through the analysis of MES data and collaboration with cross-functional teams
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support
• Proficiency in system integration in term of machine-to-machine and to application such as ERP
• Experience in delivering solutions for OEE, Energy Consumption, Traceability

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

JOB DESCRIPTIONS:

● Project management involving M&E Sanitary & Plumbing.

● Documentation of method statement and work procedures.

● Review and monitor site construction activities to ensure work completion as scheduled.

● Evaluation, cost estimation & analysis for M&E Sanitary & Plumbing.

● Preparation of design construction drawings.

● Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main Contractors, Sub-Contractors & Suppliers.

● Attend site meetings and inspections.

● Any other business related matters assigned by the Management/Head office.

REQUIREMENTS:

● Degree / Diploma in Mechanical or Engineering or equivalent.

● Working experiences in similar position preferred.

● Excellent interpersonal communication skill, innovation and result oriented.

● Ability to work independently in a challenging environment.

● Immediate starter or short notice will be an advantage.

Please apply via MyCareerFuture or email your updated CV to [email protected].

Job Responsibilities:

•Lots handling, WAT analysis and process optimization

•Device development, Yield trouble shooting and reliability improvement

•Fab transfer & Customers handling

•Customized structure process integration development

• To be responsible for helping to drive leading edge process/device development and optimization of devices in order to meet scaling, performance, reliability, and manufacturability requirements.

• Identify and solve IC process and device problems

Job Qualification

•Bachelor degree or above in Materials Science, Electrical Engineering, Chemical Engineering, Mechanical Engineering, Physics, Chemistry or a related engineer discipline.

• 5+ Years Experienced Process Engineering

• Fab 12" knowledge is preferred

• Knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles

•Good communication skills, be able to work within cross-functional teams, including internal and external partners

Key Responsibilities:

Design & Development:

Assist in designing, developing, and testing electronic circuits and systems.

Support PCB (Printed Circuit Board) design, layout, and testing.

Assist in developing prototypes and performing hardware debugging and troubleshooting.

Software Development & Embedded Systems:

Collaborate on developing embedded software for microprocessors and other embedded systems.

Assist in the integration of hardware and software components for electronic systems.

Support programming tasks using C, C++, or Python in embedded environments.

Testing & Evaluation:

Assist with hardware and software testing, verification, and validation of electronic devices.

Document test results and work with engineers to identify areas for improvement.

Research & Development:

Contribute to the research of new technologies and innovations in electronics and computer engineering.

Support the team in evaluating new components, tools, and methodologies.

Collaboration & Reporting:

Collaborate closely with engineers, software developers, and product teams to meet project requirements and deadlines.

Prepare technical documentation and reports for internal review.

Qualifications:

Currently pursuing a Diploma or Bachelor’s or degree in Electronic Engineering, Computer Engineering, Electrical Engineering, or related field.

Strong knowledge of electronic circuit design, digital systems, and embedded systems.

Proficiency in programming languages such as C, C++, and Python.

Basic understanding of microprocessors, and FPGA-based systems is a plus.

Ability to work independently as well as collaboratively in a fast-paced environment.

Strong problem-solving skills, attention to detail, and excellent communication skills.

Preferred Skills & Experience:

Experience with hardware/software co-design and integration.

Familiarity with debugging tools such as oscilloscopes, logic analyzers, and multi-meters.

Knowledge of wireless communication protocols (e.g., Bluetooth, Wi-Fi, Zigbee).

Understanding of machine learning and AI applications in embedded systems (a plus).

What We Offer:

Mentorship from experienced engineers.

Opportunity to work on impactful, real-world projects.

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Civil & Structural Engineer

Visit www.ourengineers.com

Civil and structure design, analysis and impact assessement.
Plan, design, supervise and coordinate for civil engineering and infrastructural design and site works.
Ensure all engineering works comply with all relevant statutory standards regulations and codes of practice.
Liaision with project stakeholders, clients, other consultants, contractors and relevant authorities.
Assist Team Leader in maintaining high-quality standards of design ad supervision.

Job Requirements

Bachelor of Engineering major/interested in civil engineering.
Minimum 1 year of design experience in civil engineering projects in consulting firm.
Those with more than 5 years of design experience can be considered for senior post with higher renumeration.
Familiar with authorities' submission requirements for civil/infrastructure engineering projects.
Familiar with ground improvements works, civil and structural designs and BIM will be an added advantage

We are seeking a Lead Application Support Engineer to to manage and oversee the smooth operation of critical applications, ensuring seamless user experience and system functionality.

• Competitive remuneration package (up to $6,300 + AWS + VB).
• Hybrid working arrangement.
• Leadership Role: Take charge of support operations and lead a dedicated team.

Responsibilities:

• Oversee and manage a 24/7/365 level 1 application support team, ensuring continuous support for both applications and systems.
• Participate in the recruitment and management of staff, including planning and organizing shift rotations.
• Train team members on the application's functionality, interface, and features, ensuring they are equipped to handle support tasks.
• Ensure team members provide adequate support to end-users, while also delegating tasks and responsibilities effectively.
• Take full ownership of all issues raised, ensuring they are resolved, regardless of which development team or vendor is responsible.
• Act as the primary point of contact for both technology teams and end-user clients on a day-to-day basis.
• Maintain and update a knowledge base of known issues, defects, and troubleshooting techniques, and ensure problem tickets are properly managed.
• Handle escalations effectively and manage client expectations to ensure smooth operations.
• Debug and improve application code when necessary to resolve issues or enhance functionality.

Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Minimum of 3 years experience in relevant roles.
• Prior experience in supporting Web-based applications.
• Experience with some programming languages and willingness/ability to learn.
• Familiarity with IT industry practices and methodologies (ITIL foundation certification will be an added advantage).
• Prior experience in team leading and management is a must.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Job Description

• Industry/Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: R&D Engineer
• Working Location: Bedok
• Working Hours: Monday – Friday, 8.15 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,000 + Transport Allowance + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Researching electronic components and designing new products to meet market needs.
• Supporting the complete R&D project life cycle and participating in all phases from concept to manufacturing through designing, prototyping, validation, and production of R&D products, taking into account the functionality, feasibility, quality, manufacturability, costs, and completion time.
• Giving concise and informative demos/presentations to other team members or product managers about design concepts.
• Finalizing a design and its deliverables to facilitate a smooth transition to the relevant stakeholders.
• Preparing product documentation like the bill of material, material specification, and process documentation.
• Evaluating processes and design improvements.
• Coordinating with the Global R&D team.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Engineering or Technology (Electrical/Electronics) or equivalent
• Has a minimum of 2 years of experience with passive electronic components design
• Has understanding and work knowledge of AutoCAD Electrical
• A good understanding of product safety, environmental testing, and electromagnetic compatibility (EMC) will be advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69868 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Location: Beach Road

Job Type: Contract

Duration: 6-months tender project

• 3-5 years experience in software development as a software engineer or equivalent
• Commanding grasp of Angular, Node.js
• Well versed in standard web framework such as Angular
• Proficient in OOP, SQL, design pattern, and software best practices
• Working knowledge in building backend systems around DBMS, Caches, Logging and monitoring, Web and App serve

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $6,000 to $12,000
Location: Woodlands

Job Responsibilities

• Design, develop, test, and debug robust and efficient industrial automation software using C++, C# & WPF.
• Utilize Windows API and libraries for interaction with hardware components.
• Program machine functionalities using motion control cards for precise movement control.
• Integrate with distributed I/O systems to gather sensor data and control actuators.
• Implement robust communication protocols for data exchange between software and hardware components.
• Leverage advanced threading techniques and synchronization mechanisms for optimal application performance.
• Employ advanced memory management practices, including memory mapped files, file mapping objects, and memory sections, to ensure efficient resource utilization.
• Utilize the C++ Standard Library and templates effectively for code optimization and reusability.
• Understand and utilize Windows objects like events and mutexes for thread synchronization and communication.
• (Optional) Develop user interfaces using frameworks like WPF or WinUI to provide a user friendly experience for monitoring and control (if applicable).
• Write well-documented, maintainable, and efficient code adhering to best practices.
• Collaborate with electrical engineers and mechanical engineers to understand system requirements and ensure software meets functional specifications.
• Participate in code reviews and provide constructive feedback to fellow developers.
• Stay up-to-date with the latest advancements in C++, industrial automation technologies, and relevant libraries.

Job Requirement:

• Bachelor’s degree in computer science, software engineering, or a related field
• Minimum 8 years of experience developing industrial automation software using C++, C# & WPF.
• Proven experience with programming motion control cards and distributed I/O systems.
• Strong understanding of Windows API development and memory management techniques.
• In-depth knowledge of the C++ Standard Library and its functionalities, including templates.
• Experience with Windows objects like events and mutexes.
• Familiarity with Windows GDI and GDI+ is a plus (for graphics-related tasks).
• Experience with Borland/Embarcadero C++ Builder VCL platforms is a strong plus.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Benefits:

• Basic Salary up to $3,900 with yearly increment based on performance.
• 5 days (Monday to Friday) | 8.15am to 6pm
• Our company emphasises on good career progression.

Job Description:

This is a full time role for a Mechanical Engineer located in Sin Ming Ln. Our clients are doing Engine Servicing, Alternator Servicing, Control Panel Supply and Installation. You will be responsible for repairing and servicing various equipment and engines (Cummins, Volvo, Perkins, Man, Caterpillar, and Deutz) as scheduled by the Service Manager. The individual will troubleshoot and diagnose electrical and electronic circuits, including generators and control panels, and identify necessary parts for quotations. Testing and commissioning of engines and generators are also required. They should be able to read electrical and electronic drawings and conduct equipment surveys to determine the scope of repairs or services needed. Additionally, the role involves troubleshooting and repairing engine wiring harnesses and alternator wirings, constructing or modifying control panels (AC/DC) for engines and generators, and maintaining machinery, tools, and the service area.

Qualifications:

• 1 year relevant experience

Responsibilities

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing QA/QC inspections to meet with construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendors
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub-contractors.

Other information

• *M&E Engineer, preferable recognized degree in Mech/Elec engineering
• *M&E Coordinator, diploma/specialist diploma in M&E coordination
• Min 2-3 years of experience in coordinating and supervising M&E services and/or building-related projects
• Working schedule: Full 6 days work week for the first 6 months employment (Mondays to Saturdays, 8am-6pm), after that will be 5.5 days work week (Mondays to Fridays, 8am-6pm & Saturdays, 8am-12pm)
• Proficiency in BIM and AUTOCAD will be added advantage

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

The last number of years has seen significant growth in the use of Manufacturing Execution Systems (MES) within the Life Science industry. With this trend set to continue, We are looking for dedicated, innovative and driven talent to join our expanding MES team.

We are are looking to hire a Senior/ Systems Engineer to join our MES team working at our client site, a pharmaceutical MNC. The selected candidate will be required to provide consultation and engineering service to the execution phase of the project. He/she will also be involved in the generation and ownership of IQ/OQ/PQ documentation and the GoLive Support.

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

About Cognizant

Cognizant (Nasdaq: CTSH) engineers modern businesses. We help our clients modernize technology, reimagine processes and transform experiences so they can stay ahead in our fast-changing world. Together, we're improving everyday life. See how at www.cognizant.com or @cognizant.

The exceptional EY experience. It's yours to build.

At EY, you’ll have the chance to build a career as unique as you are, with the global scale, support, inclusive culture and technology to become the best version of you. And we’re counting on your unique voice and perspective to help EY become even better, too. Join us and build an exceptional experience for yourself, and a better working world for all.

The opportunity:

EY DnA is the data and advanced analytics capability within EY Asia-Pacific, with over 500 specialist employees working across multiple industry sectors.

We implement information-driven strategies, data platforms and advanced data analytics solution systems that help grow, optimize and protect client organizations. We go beyond strategy and provide end to end design, build and implementation of real life data environments and have some of the best architects, project managers, business analysts, data scientists, big data engineers, developers and consultants in the region.

We are looking for a Data Engineer within the DnA team in our Singapore office. This role is offered on a flexible full time basis.

Your key responsibilities:

• Apply data mining, data modelling, natural language processing, and machine learning to extract and analyse information from large structured and unstructured datasets
• Develop and implement techniques and analytics applications to transform raw data into meaningful
  information using dataoriented programming languages and visualisation software.
• Visualise, interpret, and report data findings and may create dynamic data reports as well
• Design, develop, and maintain the organization's data architecture, including data pipelines, databases, and data warehouses.
• Develop and maintain ETL (Extract, Transform, Load) processes to efficiently move data from various sources to the data
• Implement data quality checks and monitoring processes to identify and resolve data issues in a timely manner.
• Collaborate with data scientists, analysts, and other cross-functional teams to understand data requirements and deliver data solutions that meet business needs.

Skills and attributes for success

• Experience in ETL, Data Engineering, Scripting.
• Knowledge and experience in end-to-end project delivery, either traditional SDLC or agile delivery methodologies (or hybrid approaches)
• Experience in a delivery role on Business Intelligence, Data Warehousing, Big Data or analytics projects
• Exceptional communication, documentation and presentation skills and stakeholder management experiences
• Experience in business intelligence, data warehousing/platform, and data strategy projects

To qualify for the role, you must have

• At least a Bachelor's degree in any of these faculties: Computer Science/Information Technology/Programming & Systems Analysis/Science (Computer Studies)
• Minimum total 3 years work experience in at least 1 of these job titles: (1) Chief Data Scientist (2) Data Engineer (3) Data Scientist (4) Head of Data Analytics
• Experience in development and maintenance of Data processing pipelines
• Experience developing machine learning workflows
• Work closely with business analysts to create data components
• Application packaging and deployment experience across DEV to PROD environments

Ideally, you’ll also have

• Dashboarding experience with Tableau / Power BI
• Experience in engaging with both technical and non-technical stakeholders
• Consulting experience and background, including engaging directly with clients
• Degree in Computer Science or IT or Business Analytics

What we look for

• Highly motivated individuals with excellent problem-solving skills and the ability to prioritize shifting workloads in a rapidly changing industry.
• An effective communicator, you’ll be a confident leader equipped with strong people management skills and a genuine passion to make things happen in a dynamic organization.

What we offer

EY offers a competitive remuneration package commensurate with your work experience where you’ll be rewarded for your individual and team performance. We are committed to being an inclusive employer and are happy to consider flexible working arrangements, where this may be needed, guided by our FWA Policy.

Plus, we offer:

• Continuous learning: You’ll develop the mindset and skills to navigate whatever comes next.
• Success as defined by you: We’ll provide the tools and flexibility, so you can make a meaningful impact, your way.
• Transformative leadership: We’ll give you the insights, coaching and confidence to be the leader the world needs.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs.

If you can demonstrate that you meet the criteria above, apply now.

To learn more about our service offerings, visit https://www.ey.com/en_gl/careers/what-you-can-do-here or subscribe to http://www.youtube.com/ernstandyoungglobal

To learn more about careers in EYSG, please visit https://www.ey.com/en_sg/careers or like us on https://www.facebook.com/eycareerssingapore

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Job Description:

• PC setup & troubleshooting, application setup & configurations for end-users
• Oversee the IT infrastructure and equipment which includes Print server, Desktops, Laptops & windows workstations
• Managing Active Directory, DNS, DHCP, IP Addressing, Group Policy
• SCCM Asset Management, WSUS Server & Patch Management
• Assist in maintenance of anti-virus platform for servers and client PCs, conduct test and deployment of Microsoft patches for servers and clients
• Review and monitor the IT infrastructure to ensure that it is secure and optimized
• Support network & server of the company, plan, recommend and implement improvement to the IT infrastructure of the company
• Perform Backup & Restoration
• File Server Access Management, Firewall and Security Administration
• Other Ad-hoc duties as assigned

Job Requirements:

• Candidate must possess at least Bachelor's Degree in Computer Science, or Information Technology
• Preferably have 3 years of experience in IT operations, PC Support & Troubleshooting, infrastructure, network administration and end user support.
• Experience in Desktop, Laptop Support & Troubleshooting, O/s & Application configuration
• Experience in Windows10, Routers, Firewall, Switches, Wireless communication, WAN, FTP, Proxy
• Willing to perform Overtime

We regret that only shortlisted candidates will be notified.

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ship electrical system design
• Electrical Load Schedule
• Electrical Single Line diagrams
• Short Circuit calculation
• Circuit breaker calculation
• Electrical equipment selection
• Electrical cable schedule, Cable tray layout, MCT design, cable route preparation, termination diagram
• Preparation of electrical material take off
• Possess good knowledge in automation integrations such as vessel ISCS, VRCS, AMS, etc.
• Prepare design drawings and documentation
• Project management, Project scheduling, client interaction, site visit (client office, ship, etc)

REQUIRED QUALIFICATIONS AND SKILLS

• Bachelor Degree in Electrical Engineering
• At least 3 years of working experience in the marine sector