(a) Install, assemble, test, or troubleshooting of CCTV / solar photovoltaic (PV) systems / electrical wiring/cabling installation/ electronic circuit on the roof or other structure in compliance with site assessment and schematics.

(b) Perform other ad-hoc or general work as assigned by the Management.

(c) Engage in supply work activities when required (separate assignment on ad-hoc basis).

(d) Assist in planning manpower for work activities.

(e) Contribute to workflow improvement, planning and schedule sctivaties.

(f) Ensure proper housekeeping f spare parts, equipment and tools.

(g) Oversee the work of contractors to ensure safety requipment and operating standards are met.

(h) Perform on the jon coaching of team members.

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

UCT is looking for a Configuration Engineer to join us in Singapore!

Duties and Responsibilities:

• Review and ensure NOC and S.O configurations accuracy.
• Creating and submitting Engineering Changes through Agile.
• Maintain sales order BOM & initiate ECO change management.
• Coordinate the ECOs/MCOs/DEVs/ECRs/SRD process internally. Flawless execution on tracking the implementation of ECO/ECN/ECR/SRD.
• Submitting Problem Report/ Supplier Problem Sheet to customer for BOM related issues (engineering-related issues).
• Ensuring all affected parts and BOMs are included in the CR/IR/PR or corrected via the Engineering Change Order (ECO) process.
• Understand the scope of the engineering change downstream.
• Responsible for setting up, manage and revise all the customers' product information, i.e. BOMs, part numbers and AVLs to have proper control on assembly revision.
• Streamline the BOM structure setup with Product Engineer for assembly sequence control, traceability data collection and material back flush accuracy.
• Work with Product Engineer to restructure customer BOM to work with UCT manufacturability.
• Validate and ensure all customer document packages such as Assembly DWG, Fabrication DWG, Procedure & Test and Manufacturing Instruction available and upload to Agile system.
• Work closely with internal/external customers to resolve any configuration issues.
• Generate list of new parts/new revision parts that needs sourcing info to the quote team for pre-determined NPI projects.
• Lead department improvement projects ie: RPA, QMS BKM, Global Training Videos.
• Ability to guide and provide technical supervision and technical support and guidance to other engineers.
• Attend audits ie: customer’s , internal and third party certification audits.
• Other tasks and responsibilities as assigned by manager.
• Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without.

Knowledge, Skills and Experience:

• Proficiency with MS suite, and ADOBE Acrobat. Advanced Excel knowledge, and design experience is a plus.
• Knowledge with engineering documentation and document control procedures.
• Able to read technical drawing and mechanical BOM.
• Basic understanding of Industrial Equipment manufacturing.

Educational/Certification Requirements:

• Degree in Engineering with a minimum of 6-8 years of related experience.

At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, a,ge, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Join us as we pursue our exciting new vision to make machine data accessible, usable and valuable to everyone. We are a company filled with people who are passionate about our product and seek to deliver the best experience for our customers. At Splunk, we’re committed to our work, customers, having fun and most importantly to each other’s success. Learn more about Splunk careers and how you can become a part of our journey!

As a Splunk Solutions Engineer (SE), you’ll be the primary technical resource for the assigned Enterprise accounts specifically covering the Regional market. Our clients and partners span all business sectors and sizes.

This is an opportunity to work at a company that is changing the way information supports business decisions. You will be responsible for actively driving and running the technology evaluation stage of the sales process, working in conjunction with the sales team as the key technical advisor and advocate for our products and services.

Splunk Solutions Engineer will answer technical inquiries from customers regarding Splunk technology, features, solutions, applications as well as eloquent Splunk technology and product positioning to both business and technical users. You will identify all technical issues of your assigned accounts to assure complete customer happiness through all stages of the technical sales cycle, and you should also establish and maintain positive relationships with our customer's technical staff.

You must be able to identify all technical issues of your assigned customers to assure complete customer happiness through all stages of the sales process, and you must be able to establish and maintain positive relationships throughout the sales cycle with our customer's and partner’s technical staff. You will work closely together with the Partner Responsible for the opportunity if required.

Responsibilities: I want to and can do that!

· Demonstrate Splunk products and services to customers on site, remotely via webinar sessions, and at field events such as conferences and trade shows

· Willing to travel to visit partners, prospects and customers, and to engage in onsite customer and partner work when required

· Experience responding to functional and technical elements of RFIs/RFPs is also relevant.

· High-reaching with a proven record in technical software/hardware sales and knowledge of technology

· Strong presentation skills and able to communicate clearly and expertly

· Ability to be organized and analytical, and eliminate sales obstacles using creative and adaptive approaches

· You should be comfortable working for a multifaceted technical organization with a fast-growing partner and customer base

Requirements: I’ve already done that or have that!

· At least 5 years of proven experience in selling and supporting software products to IT organizations

· Experience in delivering sales and technical enablement workshop or webinar to customers

· Proficient in either IT, Security or Dev Ops solutions.

· Experience and familiarity with IT management products and services.

· Experience with networking, server, application and development technologies

· Domain expertise with IT Operations, Application Management and/or security/compliance is desirable.

Splunk is an Equal Opportunity Employer: At Splunk, we believe creating a culture of belonging isn’t just the right thing to do; it’s also the smart thing. We prioritize diversity, equity, inclusion, and belonging to ensure our employees are supported to bring their best, most authentic selves to work where they can thrive. Qualified applicants receive consideration for employment without regard to race, religion, color, national origin, ancestry, sex, gender, gender identity, gender expression, sexual orientation, marital status, age, physical or mental disability or medical condition, genetic information, veteran status, or any other consideration made unlawful by federal, state, or local laws. We consider qualified applicants with criminal histories, consistent with legal requirements.

Essential Functions (Responsibilities):

- Develop and grow key accounts in the Oil & Gas sector, Pharmaceutical and other industrial sectors contribute company growth objectives in Singapore.

- Provide technical sales support and consultation to clients for the sale of electrical products in order to develop business opportunities and penetrate clients.

- Perform all aspects of selling to maintain and develop new or existing customers including: take-offs, project quotations, closing orders, preparation of submittals and resolving customer problems.

- Meet or exceed budgeted sales and gross margin targets with assigned accounts.

- Focus on identifying specific technical requirements of customers while simultaneously collecting commercial and competitive information associated with each account

- Cultivate effective long-term relationships at all levels of the customer organization.

- Attain expert knowledge of products, electrical goods market and competition.

Qualifications/Requirements:

- Formal Electrical Engineering qualification (Diploma/Certification)

- Strong technical and commercial background.

- Minimum 1 to 2 years of proven sales experience to industrial customers

- Electrical product knowledge

- Very strong consultative selling, interpersonal, and negotiation skills

- Resourceful and results-oriented.

-Highly motivated, self-confident, self-starting work ethic with good networking abilities

- Team player who works well in global teams

- Good command of spoken/written English

- Have own car

** Package up to 55K a year **

IT Engineer

Responsibilities:

• Provide IT and network support including system installation, configuration, upgrading and troubleshooting.
• Manage computer networks and related computing environments on systems software, applications software, hardware, and configurations.
• Provide daily support to user and operation system platform.
• Documentation of all the IT assets, user information, phone lines, data lines and software licenses and maintenance.
• Protect data, software, and hardware by coordinating, planning and implementing network security measure.
• Troubleshoot, diagnose and resolve hardware, software and network problems.
• Managing of IT assets and assists in decision making on acquiring IT assets.
• Setting up all the IT requirements which includes PC, Copier Machines, required software and the applications pertaining to the respective department.
• Email configuration – creating email IDs for the new staffs, taking backup of the outlook files, adding additional email accounts in accordance to internal procedure.
• Monitor server infrastructure and application full data and system backup, load balancing web server, VM server and windows SQL cluster fail over services
• Carry out and deliver change request from operation team to enhance system security and data process tracking system.
• Conduct training related to operation system application, shop floor management system and internal IT Management policy.

Requirements:

• Diploma or Degree in Information Technology or equivalent.
• Possessed at least 2 years of experience in IT hardware maintenance service on server, network and storage preventive.
• Experienced in operation systems and good troubleshooting skills.
• Strong server and storage hardware configuration knowledge will be an advantage.
• Be a quick learner in acquiring new system skills and working with new technologies.

Interested applicants please submit your resume to [email protected]

We are looking for a mechanical engineer who can assist us to do fast prototyping of our product designs.

The candidate must know how to do fast prototyping with a limited budget.

We are looking mainly for a mechanical engineer not electrical or electronic engineer.

This is a freelance project based job not a full-time post.

Please apply only if you know how to do fast prototyping. Thanks.

Career Opportunity for a Production ENGINEER

The production engineer reports to the Production Manager. The main responsibility lies in preparing report, analyse data and make recommendations for improving plant operations and solving production-related problems. You are able to contribute towards achieving organization’s goal on excellence and advancement, possesses the ability to communicate effectively, dedicated, passionate with a positive attitude to inspire and create followers. If you possess strong analytical ability, is creative and confident, we want you.

Responsibilities:

• Maintain a high level of production efficiency through continuous improvement and cost effective
• Identify, trouble-shoot production problems and improve production processes
• To initiate and carry out the necessary corrective action for non-conforming product
• Liaise with outside contractors relating to scope of work and projects assigned by immediate Superior
• Identify training needs for employees and recommend training and upgrading of potential employees
• Maintain and update operating manuals for all the manufacturing equipment and facilities
• Ensure high standard of product quality standards to IATF16949 and ISO13485
• Ensure good housekeeping and safe working environment

Personal Attributes:

• Able to handle under pressure, flexible and multi-tasking.
• Creative, passionate about technology, meticulous with eye for details.
• Work with different level of hierarchy to achieve a cohesive relationship

Requirements:

• Diploma in Manufacturing/Mechanical Engineering or equivalent
• Minimum 2-3 years experience in related field and industry
• Singaporeans/PRs are preferred

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

Experience in setting up automated systems.

Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Review of M&E system design with a view of future maintenance needs
• Managing and participating in testing and commissioning of building M&E system
• Management of facilities handover (including associated trainings, communications and related defects issues) to maintenance contractors and end users
• Managing and monitoring of project schedule, preparing and submission of claims, managing claims schedule, processes and procedures
• Leading outsource facilities management team in day-to-day M&E activities (including vendor management, reviewing and recommending preventive / corrective maintenance, planning and scheduling of preventive maintenance works and future upgrading works which may be required)
• Developing, implementing, reviewing and maintaining maintenance / emergency process, standard operating procedure, etc.
• Monitoring cost and expenditure of repair and maintenance works
• Any other duties as assigned

What the role is

The company is a dynamic and forward-thinking organization dedicated to empowering individuals and shaping the future of Singapore's workforce. As a statutory board under the Ministry of Education, the company leads the charge in driving the SkillsFuture movement, a national initiative that promotes lifelong learning and skills development. With a strong focus on innovation and collaboration, the company works closely with employers, training providers, and individuals to create a vibrant ecosystem of learning and growth. By offering a wide range of initiatives, programs, and funding schemes, the company enables individuals to unlock their full potential, acquire new competencies, and stay ahead in a rapidly changing job market.

Join the Data Strategy & Analytics Division (DSAD) team to grow Company into a data-mature organization where we use data pervasively and securely to deliver on our business missions:

• Develop and drive Company’s data strategy, including LOIs, data competency, and maintaining strong links with CIO Office
• Develop, implement, and maintain a comprehensive data governance and management framework that complies with WOG requirements
• Implement Lines of Inquiries
• Support data management and exploitation
• Develop MLOps and instill best practices

What you will be working on

As a Data Engineer within DSAD, you will play a pivotal role in managing and optimizing data pipelines, ensuring the seamless flow and integrity of data across our organization. Your expertise in data pipeline management, automation, MLOps, data governance, and infrastructure architecture will contribute significantly to our mission of leveraging data to drive innovation and operational excellence. We are looking for a candidate who embodies our core values of integrity, collaboration, and continuous improvement, and who is passionate about harnessing the power of data to achieve our strategic objectives.

• Data Pipeline Management, Automation, and MLOps Proficiency
  Manage and optimize multi-stage data pipelines for various use cases, from data acquisition to consumption
  Automate data preparation and integration tasks using innovative tools and techniques
  Apply MLOps principles to integrate machine learning models efficiently with data pipelines and infrastructure
• Data Governance, Cataloging, and Collaboration
  Work closely with data governance teams to ensure data is accurately cataloged and available for governed reuse
  Collaborate with AI engineers to optimize data solutions for machine learning projects, focusing on data flow and accessibility
• Infrastructure Architecture and Data Modeling
  Design and manage scalable data infrastructure using cloud services like AWS
  Develop efficient data models and pipelines for large-scale data sets, ensuring data quality and availability
• Data Quality Assurance, Documentation, and Continuous Improvement
  Lead initiatives to establish standards for data accuracy and reliability
  Maintain comprehensive documentation on data architectures and management practices
  Stay updated on data engineering advancements, advocating for and implementing improvements
  Facilitate knowledge sharing and technical training sessions to enhance organizational data competency

Location:

Near Paya Lebar MRT

Salary:

$4200 to $6000

What we are looking for

• Tertiary qualifications in computer science, statistics, applied mathematics, data management, information systems, information science, or a related quantitative field
• A minimum of six years of experience in data management disciplines, including data integration, modeling, optimization, and data quality
• At least three years of experience in cross-functional team collaboration and supporting data management/analytics initiatives
• Demonstrated ability to work creatively and collaboratively with both business and IT teams
• Strong interpersonal skills with the ability to engage and earn the respect of stakeholders at all levels
• Confident, energetic self-starter with a commitment to ethics, regulatory compliance, customer service, and business integrity
• Highly adaptable and committed to excellence in a dynamic business environment

Candidates without the required qualification but possess the relevant work experience are welcome to apply.

Successful candidates will be offered a 2-year contract.

Reg No: 96C4864

EA License No: R22110839

Esco Lifesciences Group provides enabling technologies, products and services to the life sciences and healthcare industries, supporting academic research and scientific discoveries, clinical practice, as well as biopharmaceutical R&D and manufacturing. Headquartered in Singapore, Esco has an extensive sales network in over 100 countries, direct sales and service offices in over 20 countries, 8 manufacturing and R&D hubs in the US, Europe, the UK, China, Singapore, Indonesia, and over 1300 employees worldwide.

Esco is poised to benefit from the sustained growth of the healthcare and biopharma industries in Asia and globally. Esco has achieved market leadership in China, and globally, in multiple categories within some of the fastest-growing segments — with China being its largest and fastest growing market. As a Singapore-headquartered company, Esco is a nexus of East and West, bridging technologies, products and talent across the world, with global operations spanning the US, Europe and Asia.

SERVICE ENGINEER

Main Duties

The ideal candidate will be involved with equipment installation, after-sales services such as calibration, certification and preventive maintenance, and service documentation and reports. Candidate must have strong interpersonal skills, independent, and able to work under pressure in a fast-paced environment.

Responsibilities:

· Field service support for Esco products

· Handle all breakdown calls in the earliest response time

· Ensure high level of customer satisfaction and effectively manage customer expectations

· Prepare field service reports and related documentation.

· Monitors repairs and maintenance activities to ensure operational efficiency and to target required hours for machine repair

· Responsible for decisions when to instigate the escalation process in order to resolve a customer concern/issue.

· Perform troubleshooting, commissioning, certification of units promoted

· Provides effective teamwork, building a strong relationship with customer contacts

· Carry out hands-on training for field service organizations internationally when needed

The Ideal Candidate Would Possess:

· Diploma or Degree in Engineering

· With at least one (1) year working experience in equipment repair and troubleshooting

· Good command of spoken and written English

· Good analytical and problem-solving skills

· Willing to travel locally and abroad

Main Activities:

• 50% on board

• 50% support at the office

• Perform servicing, repairs and maintenance on related industrial equipment (diesel engine, auxiliary engine, Volumetric Meter,etc)

• Good knowledge of high speed diesel engine

• Able to prepare a hand-written work done, with data recorded as per format templates and service report with photos, upon completion of job.

• Experience in handling harbourcraft vessels/small barges operation or coastal bunkering operation

• Liaise with customers on delivery schedule by bunker barges and requirement

Requirements:

• Certificates or Higher in any Marine or Mechanical or Automotive or Engine or equivalent engineering

• Min 2 years of working experience in Engine, Genset or automotive or Marine industries

• Familiar with Singapore port waters

• Valid MPA Helmsman / Steerman (Port limit) license is an advantage but not a must

• Good knowledge in MS Office.

Your responsibilities include:

• Conceptualize M&E designs and execute the project with the detailed designs.
• Manage and engage client/consultant/ contractors and local authorities to drive project execution, submission to authorities and overall on-site construction supervision.

What you will need:

· A recognized university degree Mechanical or Electrical Engineering or Building Services.

· Minimum 7 years’ of relevant experience in design and implementation of building services.

· Strong team-working, communication and interpersonal skills. Able to build good working relationships with client and key stakeholders.

· Open to opportunities to be trained on a wide range of technical and management topics.

· Entry level will be considered for Engineer positions.

Supervision of works at site in accordance with the design

• Preparation and maintenance of daily report / record

• Check and conduct inspections on works performed by subcontractors / gangs

• Check all construction drawings / sketches received on site and to report any discrepancy to the Project Manager

• Handle all problems arising from the project

• Preparation of progress report for the Client / Consultants

• Work in conjunction with the Project Manager and Safety Supervisor to keep the site safe and tidy

• Co-ordinate the handing over of completed works to the Client / Consultants and completion of the necessary rectification works

• Submission of as-built drawings at the end of the project

POSITION : Engineer, ESD (Environmentally Sustainable Design: Green Mark, Green Building)

LOCATION : Flexible (Singapore) REPORTING TO : ESD Manager

POSITION SUMMARY:

Will significantly contribute to building a better world that is environmentally sustainable. Opportunity to work with multicultural international teams and be involved in large projects for optimizing indoor performance, maximizing energy and water saving, sustaining the environment and obtaining international recognition.

COMPANY PROFILE:

Afogreen Build is a green consultant based on Sydney, Singapore, and Jakarta. We are committed to provide excellent and hassle-free services in achieving environmental sustainability through green consultancies. Our team has decades of experiences and proven track records of various green consultancies with worldwide clientele including those from the USA, France, UK, Australia, China, Japan, Singapore, Malaysia, Indonesia, and Vietnam.

JOB DESCRIPTIONS

· Manage green consultancy projects independently with minimal supervision.

· Prepare reports, presentations and project submissions.

· Search for materials, products, technical specification and cost.

· Conduct all necessary calculations and simulations, such as ACMV system, lighting, landscape, ETTV/OTTV, energy simulation, wind simulation, daylight simulation, solar radiation simulation, etc.

· Coordinate multidisciplinary consultants, building owners, contractors, suppliers, and authorities.

· Conducting physical walk through and detail measurement of the building related to ACMV, lighting, indoor comfort, etc, to analyse building system performance and propose improvement.

· Support marketing, sales, training, and administrative activities.

REQUIREMENTS

· Engineering Degree (mechanical, electrical, building science).

· Fluency in written and spoken English.

· Able to operate CAD software, energy simulation, wind simulation, wind driven rain, and daylight software.

· Understanding of building systems particularly in mechanical, electrical, and plumbing.

· Understanding of Green Mark, LEED, GBI, Greenship, WELL, and other green rating system.

· At least 1 year of relevant working experience. Candidate with more experiences can be considered for senior position.

PERSONAL ATTRIBUTES

· Has leadership quality that can lead and guide others to achieve project goal.

· A person with meticulous eyes and careful with details.

· Good interpersonal communication skill

· A quick learner with initiative to take necessary actions beyond instruction given.

· An independent and highly self-motivated individual who has a sense of urgency towards project completion and strong problem-solving skills.

Please submit detailed CV, academic transcript and expected salary to [email protected]

We would like to seek your understanding that we will not be able to reply all applicant on the application status. Only selected applicants will be invited to interview. Further company information can be found in www.afogreenbuild.com

Role: Contract (1 year, Renewable)

Mandatory Skills: At least 5 years of experience as a Level 2/Level 3 Network Engineer

Location: Bay Front Avenue

Shift: 12 hours working * 3 days, includes night shift (May require working inside the Casino)

Job Description:

• Support network infrastructure projects,
• provide support to resolve network incidents and issues, provide post-cutover support for various projects as directed by IT Network team
• Participate in project meetings, discussions, and handover of projects.
• Including draft, review and submit project related documents/ reports/ metrics as and when required
• Troubleshoot project related issues and resolve such issues, manage and monitor system utilization and performance during pre-project and post-project cutover and any other tasks or works as and when requested and assigned by the Company

Scope of Work:

- Work closely with project teams to understand network requirements and objectives, ensuring seamless integration of network infrastructure within the integrated resort.

- Provide comprehensive support and administration for the entire project, encompassing Cisco routers, switches, and other network devices.

- Implement and manage network solutions to support project initiatives, prioritizing scalability, performance, and robust security.

- Configure and optimize network devices, including routers and switches.

- Configure Multicasting Protocols to ensure efficient multicast traffic distribution.

- Conduct thorough network assessments, identifying potential improvements and upgrades to align with project goals.

Key Qualifications/Requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.

• Proven experience as a Network Engineer, preferably in project-oriented environments within the hospitality or integrated resort industry.

• Strong knowledge of network protocols, technologies, and architectures (e.g., OSPF, BGP, IP Multicast, Policy Routing).

• Experience in Layer 3 Routing and Layer 2 Switching, with strong expertise in installing, configuring, and troubleshooting Cisco devices.

• Experience with network infrastructure design and implementation, including LAN/WAN, data centers, and cloud networks.

• Skilled in deploying Layer-2 technologies like VLANs, VTP, STP, RSTP, Inter-VLAN routing, VLAN Trunking, Ether Channels, VLAN access-maps, and port security.

Job Description

• Assist the Chief Engineer / Assistant Chief Engineer in supervising, co-ordinating and directing the activities of the Engineering staff and in administration of the Engineering Department.
• Assist the Chief Engineer / Assistant Chief Engineer in implementing maintenance and repair of all machinery, equipment, apparatus and fixtures and preventive maintenance programs in the Hotel.
• Assist Chief Engineer / Assistant Chief Engineer in preparing the work schedules of all Engineering staff including their shifts, days off and annual leave.
• Assist the Chief Engineer / Assistant Chief Engineer in the training of staff according to establish procedures and standards.
• Submit daily activities report on operations, repair, maintenance and special projects. Keep accurate records of machine breakdowns, repairs and operating costs.
• Log down all activities including service breakdowns that occur during his shift and submit report to the Director of Engineering/ Chief Engineer.
• Check and follow up on out-of-order rooms to be released soonest possible.
• Supervise and train staff in their work and conduct daily briefings to all staff on the shift.
• Organise special and irregular engineering repairs or projects.
• Prepare list of replacement parts to be ordered for the Assistant Chief Engineer.
• Prepare list of replacement parts to be ordered for the Chief Engineer / Assistant Chief Engineer.
• Ensure that fire and safety procedures are carried out at all times.
• Be fully familiar with the Emergency Procedures as established by the Hotel.
• Perform other duties as directed.

Job Specification

Knowledge & Skills

Good knowledge in building services and engineering systems in the Hotel.

Hands-On experience in tackling engineering problems and provide guidance to the technicians.

Education, Training & Qualifications

Diploma or ITC or NTC-2 Certificate.

Experience

Minimum 4 years of experience.

RESPONSIBILITIES

v Manage project schedule and ensure that goods are delivered on-time in accordance with demand and goods availability.

v Liaise with customer on project related activities.

v Provide engineering support to the manufacturing plant for wellhead and X’mas tree projects such as to resolve non-conformance.

v Coordinate among various departments in the plant and Singapore design office to ensure seamless project execution.

v Organize project kick-off meetings and regular project meetings.

v Travel to vendors or customers’ facilities for meeting and discussion.

v Participate in contract review with Singapore commercial team upon receiving customer order.

v Involve in engineering review with Singapore engineering team to provide input from manufacturing plant.

v Manage and monitor project cost.

v Any other ad-hoc duties as assigned.

REQUIREMENTS

v Degree in Mechanical Engineering.

v Minimum 3 – 5 years of working experience as System Integration Engineer in the Oil & Gas Industry

v Familiar with API 6A, Surface Wellhead and X’mas tree product.

v Possess good engineering knowledge. Subsea knowledge will be an added advantage.

v A team player with ability to work with all levels of staff.

v Can work under a fast pace environment with tight schedule.

v Ability to travel frequently (about 50%).

v Meticulous and particular about product quality.

v Independent, resourceful and responsible.

v Proactive with ability to identify issues and propose solutions.

Troubleshoot the production machine technical problems

Responsible for end-to-end machine technical control

Overseeing the control of Masterbatch

Manage the maintenance schedule, Troubleshoot and coordinate with outsources for repairs

Minimum 3 to 6 years experience working in plastic production industries

Be the technical advisor for technical service, support and running trials with customers

Preferred Any Degree / Diploma

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create and deploy software solutions for high-speed automation systems.
• Architect, program, test, troubleshoot, and verify software applications.
• Assess and define system performance metrics and requirements.
• Software support to field service teams, update and optimize software for equipment.

Requirements

• Expertise in C/C++ programming and multi-threaded Windows development with Visual C++.
• Strong knowledge of electronic components, motion control, and interfacing with inspection systems.
• Proficient in mathematical principles and algorithm development.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities:

• Coordinate the work and performance of multiple teams and subcontractors to achieve outcomes
• Ensure compliance of the works with technical specifications process
• Conduct and administer overall job planning and programming including short range and intermediate activities for construction projects for approval by the Project Manager
• Input information and undertake minor design on site and monitor and recommend changes to design details to increase the ease of construction
• Provide and take leadership responsibility in health, safety and environment management.
• Contribute to development of work methods and rolling short term construction programs and plan daily/weekly production work.
• Complete progress reporting, and activities, reports for shift handovers and consistent regular reporting to the Resident Technical Officer or Project Manager
• Ensure compliance of commercial and financial costs including budgets and the implications of directions within your authority limits
• Perform all duties in accordance with policies, processes, systems and procedures
• Exercise professional judgement in resolving engineering issues, i.e. construction methods, design, engineering procedures, etc.
• Verify subcontractors’ claims and variations

Requirement

• Diploma/ Degree in Civil Engineering or relevant
• Minimum 3-5 years’ engineering experience
• Construction management and specific technical skills base relevant to program of work and discipline area
• Wide level of planning, development and review of complex projects
• Implementation of a process and/or product system of audits and schedules
• Skill in use of document and record management, progress and project performance reporting

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements

Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are seeking Senior Engineers responsible for the design and implementation of Communication Systems for military and/or commercial applications. You must be able to work in a fast paced and dynamic environment. You will work with our experience team members to provide cutting-edge technology to the customers.

Be Part of Our Success

• System Engineering Design
• Generating Test Plan & Procedures
• Sourcing and Procurement of System Hardware
• Planning and Setting up Test Lab
• Conduct Factory Acceptance Test
• Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites
• Perform Troubleshooting and Resolving System Faults
• Perform On-Site Acceptance Test
• Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Qualities We Value

• Minimum 2 to 3 years working experience in industry
• Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred
• Computer literate e.g. MS office, Visio
• Excellent Oral and Written Communication Skills
• Excellent Time-management
• Good Learning Capability
• Working location is in Jurong East
• Singaporeans Only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated
• Meaningful work and projects that make a difference in people’s lives
• A fun, passionate and collaborative workplace
• Competitive remuneration and comprehensive benefits

Responsibilities

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors / vendors / internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Site inspection and QAQC check
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastage of all.
• Adherence to safety practices in the workplace.

Requirements

• Techinical expertise and knowledge in Foundation, Structural and Civil Works
• Proficient in Microsoft Project

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Strategize on maintenance, work instruction and methods to create plant equipment preventive maintenance procedures
• Support in the planning of routine maintenance of production equipment
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle
• Oversee and control maintenance costs. Manage budget for equipment upgrades and replacements.
• Train and mentor technicians in equipment operation concepts and maintenance techniques
• Function as project development member to install/ upgrade equipment. Schedule and obtain project material and manpower
• Support plant EHS and quality initiatives and targets
• Assist with developing budgets and long-range plans based on company growth and future maintenance needs

Major Responsibilities:

• Responsible for the maintenance (corrective, preventive, predictive) of plant equipment, wet process and dryer, dry blending and packaging, Clean In Place (CIP) systems, warehouse in compliance with site safety and GMP procedures to ensure good uptime and good MTBF
• Support the equipment qualification and validation such as walkdown, punch list commissioning, IQ/QQ/PQ for any new projects
• Execution of work order and record job performance via MAXIMO system
• Writing job aids and maintenance SOP, CCA and ER investigation reports
• Manage and lead contractor, vendor and service providers to perform maintenance or project works
• Maintenance budge for area of responsibilities
• Lead and take part in continuous improvement efforts/projects
• May act as a delgelate to the Engineering Manager when required
• Any other duties as assigned by supervisor

Requirements:

• Bachelor of Engineering (Mechanical, Mechatronic, Aerospace) or related disciplines
• Minimum 2 years of relevant mechanical/maintenance experience in manufacturing plant, preferably within GMP manufacturing environment or chemical manufacturing.
• Good communication and interpersonal skills
• Good team player and able to multi task

*Kindly note this position is based in Tuas

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.