After Sales Executive

by Charmaine Soh [R24122333]

Benefits:

• S$3000 basic +++++++++++
• 5 Days work week (Monday to Friday, 9am to 6pm)
• Company transport available (Pioneer, CCK, Potong Pasir, Yee Tee )

Responsibilities:

• Arrange export shipment to distributors/customer from YASC (Drop shipment and Export shipment)
• Prepare and handle commercial documentation like invoices/ delivery orders/shipping documents, etc using in-house systems RPMS
• Coordinate shipments / cargo collection with warehouse department
• Prepare certificates required for shipments (SMF/COO/COQ etc)
• Prepare Letter of Credit submission to bank
• Liaise with external vendors like freight forwarders, clearing houses, 3rd party logistics, delivery contractors, etc.
• Process manual purchase orders and shipping instructions to other vendors in Japan/America/Europe/China/Indonesia/Thailand/India
• Negotiate rates and contracts to optimize delivery load and cost
• Plan and monitor inbound shipment/freights from overseas and local suppliers
• Track and monitor cost of unloading and loading
• Investigate claims made by distributors for any shortages, mis-supply, defective parts, etc with warehouse person in charge
• Prepare orders and monthly reports when necessary

Requirements:

• Nitec & above
• Min 3 years of relevant experience

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

About the company:

Our client is a leading global provider of advanced drilling and production equipment for the energy industry, specializing in subsea, offshore, and land-based applications. The company is known for its high-quality, reliable solutions designed to meet the demanding needs of the oil and gas sector.

Responsibilities:

• Promote a positive HSE culture by advising on and supporting the implementation of health, safety, and environmental procedures.
• Conduct inspections of fire extinguishers, slings, cables, shackles, vehicles, and emergency systems to ensure compliance and functionality.
• Analyze and monitor Preventive Action Reports (RAP) to address safety concerns effectively.
• Ensure that the ART (Activity Risk Assessment) is properly prepared and suitable for the work being conducted.
• Provide guidance to management on ensuring compliance of offices, workshops, facilities, and operations with company policies and legal requirements.
• Advise line management and supervisors on HSE-related matters and best practices.
• Support the HSE department with administrative systems and processes.
• Serve as the liaison with relevant authorities on health, safety, and environmental matters.
• Investigate incidents, analyze trends, and recommend corrective actions as necessary.
• Coordinate with supervisors, line managers, and external agencies on OH&S training content and deliver training as required.
• Assess the effectiveness of in-house HSE training programs and recommend improvements.
• Maintain and update databases and consultation documents related to the Occupational Health and Safety Management System (OHSMS) and Environmental Management System (EMS).
• Conduct internal audits and site inspections to ensure compliance with OH&S policies, risk assessments, and work procedures. Participate in client, company, and external audits as needed.
• Gather and document evidence to close out actions from investigation reports, CPARs, and ISO audits.

Requirements:

• Min. Diploma and above in an Engineering / HSE or related field.
• Must be registered as a Workplace Safety and Health Officer (WSHO) with MOM.
• Certifications in ISO 14001 and ISO 45001 are preferred.

To apply online please use the 'apply' function, and attach your updated resume.

(EA: 94C3609/R1442042)

Key Responsibilities:

1. Machine Maintenance: Perform routine checks, repairs, and preventive maintenance on machinery to ensure efficient operation and minimize downtime.
2. PLC Programming: Modify and troubleshoot PLC programs (Mitsubishi and Omron) using GX Developer and CX Developer software to optimize machine functionality.
3. Technical Systems Handling: Maintain and troubleshoot pneumatic, hydraulic systems, and associated components effectively.
4. Electrical Expertise: Interpret electrical drawings and ladder diagrams to support maintenance tasks and machine modifications.
5. Production Support: Prioritize repairing and improving production machinery to enhance performance, reduce breakdowns, and improve part quality.
6. Process Optimization: Identify and resolve production bottlenecks to improve efficiency, and recommend corrective measures for machinery improvement.
7. Safety & Compliance: Ensure repairs and modifications adhere to safety standards and participate in developing and reviewing safety protocols.
8. Collaboration: Work with cross-functional teams and supervisors to achieve quality, productivity, and cost-reduction goals.
9. Audit & Documentation: Compile accurate documentation, assist in audit protocol development, and ensure adherence to quality standards (e.g., IATF 16949, ISO14001).
10. Continuous Improvement: Plan and execute improvement projects, coordinate departmental objectives, and maintain a clean, organized, and safe work environment.

Other Information

• At least a tertiary education in Engineering field
• Welcome candidates without experience

**We regret to inform that only shortlisted candidates would be notified

Interested applicants may send their resume to [email protected] or click APPLY NOW

Talentvis Singapore Pte Ltd | EA License No: 04C3537
EA Personnel Name: Ong Hui Shan (Gwen) | EA Personnel No: R1767800

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in CMP equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Benefits:

• Basic Salary up to $2,300 with yearly increment based on performance.
• 5 Days Work Week (Mon-Fri,8:30am - 5:30pm)
• Reimbursement of Transport claims from office to client site
• Company Medical Insurance and Approval Clinics Panel for staff Medical Consultation.
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description:

This is a full time role for a Technical Specialist located in Ang Mo Kio. Our client makes sophisticated nurse call systems, enterprise reporting and analytics tools, and industry-leading software applications for caregivers and clinical staff and you will be responsible for performing preventive and corrective maintenance according to Standard Operating Procedures and Work Instructions. It also requires coordinating site work with sub-contractors and customers, as well as providing on-site support for systems testing, commissioning, and client training, both locally and overseas. Additionally, the position entails responding to emergency service calls during and after office hours, including public holidays, as part of a weekly standby rotation.

Qualifications:

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.

Benefits:

• Basic Salary up to $2,300 with yearly increment based on performance.
• 5 Days Work Week (Mon-Fri,8:30am - 5:30pm)
• Reimbursement of Transport claims from office to client site
• Company Medical Insurance and Approval Clinics Panel for staff Medical Consultation.
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description:

This is a full time role for a Technical Specialist located in Ang Mo Kio. Our client makes sophisticated nurse call systems, enterprise reporting and analytics tools, and industry-leading software applications for caregivers and clinical staff and you will be responsible for performing preventive and corrective maintenance according to Standard Operating Procedures and Work Instructions. It also requires coordinating site work with sub-contractors and customers, as well as providing on-site support for systems testing, commissioning, and client training, both locally and overseas. Additionally, the position entails responding to emergency service calls during and after office hours, including public holidays, as part of a weekly standby rotation.

Qualifications:

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.

about the company

Our client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines
• Prepare, setup and qualify machines
• Machine assembly
• Setting up of AOI machines
• Machine alignment, teaching and testing

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Clean room environment experience will be a plus
• Assembly & troubleshoot semiconductor equipment
• Training given to candidates with no experience

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job.

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Job Description

• Industry/ Organization Type: Refrigeration and Air-Conditioning System Provider
• Position Title: Engineer (Sales & Project in HVAC Equipment and Refrigeration system)
• Working Location: East – Ubi (Walking distance from Ubi MRT to the company)
• Working Hours: 5 days (Monday to Friday 8.30 am-5.30 pm)
• Salary Package: Up to SGD 5000 + AWS + Performance Bonus + Commission
• Duration: Permanent

Key Responsibilities

Project

• Design, plan, and manage the testing, commissioning, and supervision of HVAC & Refrigeration projects in accordance with project plans, specifications, and contracts.
• Develop and maintain design documentation, submittals, and re-estimation reports. Ensure thorough project documentation and provide regular updates to management on project status.
• Perform site surveys to determine the placement of pipes, ducts, and control panels, attend site meetings, and ensure adherence to safety regulations while monitoring construction progress.
• Collaborate with consultants, contractors, suppliers, and governing bodies to ensure seamless project execution.
• Execute testing, commissioning, and quality assessments to guarantee the functionality, dependability, and safety of HVAC systems. Troubleshoot, repair, and maintain system components.
• Support clients in enhancing energy efficiency, troubleshooting issues, and offering post-installation assistance.
• Create 2D engineering and electrical diagrams using specialized software.
• Control material and labour expenses to align with budget constraints.

Sales

• Analyze market trends, observe competitor activity, and identify emerging market segments and potential customer profiles.
• Engage with customers, follow up on leads, and nurture client relationships to drive acquisition and retention.
• Formulate and implement sales strategies, negotiate agreements, and provide technical support both before and after sales.
• Compile comprehensive sales reports and work collaboratively with internal teams to ensure seamless delivery of services and customer satisfaction.
• Advocate for the adoption of innovative technologies and participate in ongoing improvement initiatives.

APPLY NOW!!!

• Min. Diploma in Engineering.
• Min 2 years of working experience in sales, servicing or project management for HVAC.
• Strong understanding of mechanical or electrical systems and technologies, with the ability to communicate technical concepts effectively to non-technical audiences.
• Willing to travel overseas as needed for onsite client meetings, presentations, industry events as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69657 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• Position title : Sales Engineer
• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours : 830 a.m. to 530p.m.
• Salary : $3,000 - $4,500 (depends experience)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up-to-date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in Engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

After Sales Executive

by Charmaine Soh [R24122333]

Benefits:

• S$3000 basic +++++++++++
• 5 Days work week (Monday to Friday, 9am to 6pm)
• Company transport available (Pioneer, CCK, Potong Pasir, Yee Tee )

Responsibilities:

• Arrange export shipment to distributors/customer from YASC (Drop shipment and Export shipment)
• Prepare and handle commercial documentation like invoices/ delivery orders/shipping documents, etc using in-house systems RPMS
• Coordinate shipments / cargo collection with warehouse department
• Prepare certificates required for shipments (SMF/COO/COQ etc)
• Prepare Letter of Credit submission to bank
• Liaise with external vendors like freight forwarders, clearing houses, 3rd party logistics, delivery contractors, etc.
• Process manual purchase orders and shipping instructions to other vendors in Japan/America/Europe/China/Indonesia/Thailand/India
• Negotiate rates and contracts to optimize delivery load and cost
• Plan and monitor inbound shipment/freights from overseas and local suppliers
• Track and monitor cost of unloading and loading
• Investigate claims made by distributors for any shortages, mis-supply, defective parts, etc with warehouse person in charge
• Prepare orders and monthly reports when necessary

Requirements:

• Nitec & above
• Min 3 years of relevant experience

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Benefits:

• Basic Salary up to $2,300 with yearly increment based on performance.
• 5 Days Work Week (Mon-Fri,8:30am - 5:30pm)
• Reimbursement of Transport claims from office to client site
• Company Medical Insurance and Approval Clinics Panel for staff Medical Consultation.
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description:

This is a full time role for a Technical Specialist located in Ang Mo Kio. Our client makes sophisticated nurse call systems, enterprise reporting and analytics tools, and industry-leading software applications for caregivers and clinical staff and you will be responsible for performing preventive and corrective maintenance according to Standard Operating Procedures and Work Instructions. It also requires coordinating site work with sub-contractors and customers, as well as providing on-site support for systems testing, commissioning, and client training, both locally and overseas. Additionally, the position entails responding to emergency service calls during and after office hours, including public holidays, as part of a weekly standby rotation.

Qualifications:

• Fresh / Entry-level / Relevant Experience for NTC2 / ITE / Diploma in Electronics or IT Engineering background. Certificate for Electronics / IT Engineering will be required upon interview.

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in CVD equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description

• Industry/ Organization Type: Refrigeration and Air-Conditioning System Provider
• Position Title: Engineer (Sales & Project in HVAC Equipment and Refrigeration system)
• Working Location: East – Ubi (Walking distance from Ubi MRT to the company)
• Working Hours: 5 days (Monday to Friday 8.30 am-5.30 pm)
• Salary Package: Up to SGD 5000 + AWS + Performance Bonus + Commission
• Duration: Permanent

Key Responsibilities

Project

• Design, plan, and manage the testing, commissioning, and supervision of HVAC & Refrigeration projects in accordance with project plans, specifications, and contracts.
• Develop and maintain design documentation, submittals, and re-estimation reports. Ensure thorough project documentation and provide regular updates to management on project status.
• Perform site surveys to determine the placement of pipes, ducts, and control panels, attend site meetings, and ensure adherence to safety regulations while monitoring construction progress.
• Collaborate with consultants, contractors, suppliers, and governing bodies to ensure seamless project execution.
• Execute testing, commissioning, and quality assessments to guarantee the functionality, dependability, and safety of HVAC systems. Troubleshoot, repair, and maintain system components.
• Support clients in enhancing energy efficiency, troubleshooting issues, and offering post-installation assistance.
• Create 2D engineering and electrical diagrams using specialized software.
• Control material and labour expenses to align with budget constraints.

Sales

• Analyze market trends, observe competitor activity, and identify emerging market segments and potential customer profiles.
• Engage with customers, follow up on leads, and nurture client relationships to drive acquisition and retention.
• Formulate and implement sales strategies, negotiate agreements, and provide technical support both before and after sales.
• Compile comprehensive sales reports and work collaboratively with internal teams to ensure seamless delivery of services and customer satisfaction.
• Advocate for the adoption of innovative technologies and participate in ongoing improvement initiatives.

APPLY NOW!!!

• Min. Diploma in Engineering.
• Min 2 years of working experience in sales, servicing or project management for HVAC.
• Strong understanding of mechanical or electrical systems and technologies, with the ability to communicate technical concepts effectively to non-technical audiences.
• Willing to travel overseas as needed for onsite client meetings, presentations, industry events as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69657 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

• Responsible for corrective and preventive maintenance of plant machinery and monitoring of critical spare parts.
• Carry out corrective maintenance on plant machines.
• Support on preventive maintenance and machine repair.
• Attend to machines installation, modification, safety items, laboratory equipment, etc.
• Identify and carry out improvement items for machines.
• Liaise with machine agents for repair or maintenance of machines.

Requirements:

• Degree in Electrical/Electronic or Mechanical Engineering
• Prefer 2-3 year(s) of experience in maintenance/repair of machine in a manufacturing environment.
• Good trouble shooting, presentation and analytical skills.
• Good knowledge of PLC programming skills.
• Self-disciplined, independent and able to work under pressure.
• Able to communicate with all levels of staff.
• Able to commit to 12 hours shift work.

Manufacturing Industry

Loyang Area

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No : 06C3745

Audris Teo/ EA Personnel No: R1102063

About the company

Our client is a leading global provider of advanced drilling and production equipment for the energy industry, specializing in subsea, offshore, and land-based applications. The company is known for its high-quality, reliable solutions designed to meet the demanding needs of the oil and gas sector.

About the job

• Develop and implement procedures for inspecting, testing, and assessing the accuracy and precision of products and production equipment.
• Design and evaluate inspection and testing processes, mechanisms, and equipment.
• Perform quality assurance testing and statistical analysis to evaluate control levels and manage product quality risks.
• Carry out root cause analysis for incidents requiring corrective actions.
• Ensure corrective actions and deviations comply with reliability standards, and confirm that all documentation meets the required compliance standards.
• The role requires applying practical knowledge typically gained through advanced education and relevant work experience.

Qualifications and Requirements:

• Mandatory API Q1 and Q2 certifications.
• Required internal audit certification in relevant ISO standards (ISO9001 / ISO14001).
• A minimum of 5 years of experience in a similar role.
• A Diploma in Mechanical Engineering or a related field.

Location: Tuas (Company transport provided)

To apply online please use the 'apply' function, and attach your updated resume.

(EA: 94C3609/R1442042)

• Position title : Sales Engineer
• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours : 830 a.m. to 530p.m.
• Salary : $3,000 - $4,500 (depends experience)

Interested applicants can also send your resume to WA: +65 8016 4051 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up-to-date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in Engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

• Increase revenue and market growth of general laboratory products and solutions in the assigned market segment.
• Handle enquiries from customers and prospects, providing excellent pre-sales and after-sales support.
• Build and maintain positive relationships with existing and potential customers, along with key opinion leaders.
• Monitor market trends and evaluate customer requirements.

Requirements:

• Degree in Marketing or equivalent.
• At least 4 years of sales experience in Laboratory Equipment/Consumables.
• Strong understanding of scientific and general laboratory consumables.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

The Role:

• Lead Engineer role for mechanical scope.

• Perform all engineering design assignment (Core: Pumps, Compressors, Blowers, Turbines, Machinery, Package Equipment. Option: Vessels, HVAC).

• Checker role for department rotating/package deliverables.

• Prepare specifications, data sheet, and inquiry documents.

• Perform all discipline engineering assignment and design work.

• Perform technical bid evaluation.

• Mechanical handling and movement study.

• Coordinate with disciplines for layout.

• Review of vendor documentation and vendor management.

• Provide technical requirements and assessment for inspection and QC-related matters.

• Participate in site surveys, HAZOPs, and various workshops.

• Participate in FATs, shop inspections and provide technical support during construction, pre-commissioning stage.

• Handle interface matters and coordinate with relevant parties.

• Must be ready to work at construction site and be ready for working overseas upon request.

• Other work-related requests from Department Manager/Supervisor.

The Requirements:

• Degree in Mechanical Engineering, with 12 to 15 years experience in the industry.

• Has onsite experience for field engineering, commissioning and troubleshooting.

• Familiar with Shell DEPs, Exxon GPs, Chevron CES and GMPs design is an added advantage.

• Familiar with and have experience with pumps, compressors blowers, turbines and other industrial package.

• Possess ability to interpret client requirement, identify deviations and coordinate for resolutions.

• Demonstrates the ability to verify own product for error free output and draft technical resolutions for issues, communicate interface matters timely to various discipline.

• Experience to lead an amalgamated team of engineers working in different locations.

• Competent in English language and proficient in MS Office programs.

• Competent in planning and coordination with relevant parties both internal and external.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.:R1111100)

Night Baker

Working Hours: 5 days rostered work week [ 8pm to 530am ]

Location: Buroh Lane [ Shuttle service from Lakeside MRT ]

Salary: up to $2600

Requirements:

• Certificate in Baking Skills or its equivalent

Job Scope:

• Daily production of bakery bread products in accordance with specifications from recipes
• Maintain highest quality and consistent products standards
• Ensure safe and proper use of equipment at all times
• Maintain a high standard of cleanliness in and around workstation and strictly abide with health/sanitation regulations
• Any other ad-hoc duties base on operational needs

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]