The Tunnel Engineer is responsible for, but not limited to, the following:

• Provide planning of tunnelling operation from safety, quality, and productivity viewpoint.
• Provide engineering supervision to bored tunnelling operation, including final ring selection and selection of key.
• Ensure the work is done in compliant with the protocol established for the project.
• Coordinate with project stakeholders.
• Report to Tunnel Manager / Deputy Tunnel Manager / Sr Tunnel Engineer.

(C) Minimum Qualifications/ Job Experience:

• Recognized bachelor’s degree in engineering.
• Minimum 5 years of TBM bored tunnelling experience.
• Large diameter (over 10m diameter) bored tunnelling experience.
• Hydro-Shield TBM experience (if applicable)

Digital Engineer's overall responsibility is to drive digitalisation efforts within the project teams for the purpose of delivering an IDD project. Be a champion in the advancement of BIM, VDC and digitalisation.

Responsibilities

• Proficient with C&S/ Archi / M&E 3D Models
• Provide inputs to improve QA/QC monitoring for alignment with organisation VDC/IDD standards
• Updating of organisational BIM templates and standardisation documentation
• Creation and monitoring of 2D/3D families
• Lead a team of Modellers/Specialist and monitor the BIM model deliverables for design, documentation and fabrication purpose
• Coordinate and monitor shop drawing submission schedule.
• Familiar with BIM documentations and shop drawings directly from the models
• Support design coordination with technical teams, Client, subcontractors via VDC
• Run QA/QC check for correct parameters and attributes for 5D Cost Management
• Create/Maintain Dashboard for monitoring of project management metrics

Requirements

• Degree in Engineering or equivalent (with relevant course in BIM) or Trained in BIM (Diploma/Training Certificate) or Tier 2 DDM Accreditation
• Proven track record with at least 4 years full experiences with BIM modelling and management, preferably from A1 Main Contractor or Consultants
• Must be proficient in Revit, Navisworks & MS Office
• Preference of basic knowledge on Dynamo & Civil3D usage
• Have experience with 4D Synchro/Fuzor, 5D Cubicost and PowerBI implementation
• Good command of spoken and written English
• Highly adaptable, flexible personality who embraces teamwork, but also enjoys working independently
• Experience with Infrastructure Projects will be an added advantage

Job Description:

1. Preparation of design calculation sheets, design & construction drawings, and any other
related documentation
2. Receive approvals from relevant Authorities and/or Employers
3. Prepare concrete design calculations such as bridges, drainage culverts, and retaining
walls
4. Prepare steel structural design calculations such as steel bridges, and temporary sheet
piles
5. Prepare settlement/consolidation calculations
6. Prepare slope stability calculations
7. Prepare construction planning & management for the works such as reclamation,
dredging, soil improvement, soil investigation, ground compaction, piling, steel
fabrication, and concrete, etc.

Job Requirements:
1. Bachelor of Engineering in Civil/Geotechnical Engineering
2. Design experience such as piling foundation, drainage, Earth Retaining Stabilizing
Structure (ERSS), soil improvement design (PVD, DCM, sand pile, gravel pile), ECM, Gravity wall, FEM, Slope stability
3. Familiar with the latest design standards such as Eurocode, British standards, ACI, ASCE, PIANC, CIRIA etc.
4. Well-versed in software e.g. Auto CAD, Microsoft Word, Excel, Power Point, Geoslope, PLAXIS etc.
5. Contract duration of 3 years
6. 5.5 days' workweek
7. Project site located at Woodlands

Job Summary

As a DevOps Engineer, you will play a crucial role in streamlining our software development and deployment processes. Your responsibilities will include implementing cloud computing solutions, establishing continuous integration and deployment (CI/CD) pipelines, and developing automation scripts for various aspects of our software lifecycle. You'll collaborate with team members to enhance engineering tools and procedures, conduct system security scans, and liaise with third-party vendors to manage technical issues. Your expertise in cloud platforms, DevOps tools, and system administration will be essential in maintaining and improving our technical infrastructure, ensuring efficient and secure software delivery.

Key Responsibilities

• Apply cloud (AWS, Azure, GCP) computing skills to deploy upgrades and fixes.

• Put in place continuous integration (CI) and continuous deployment (CD) process and tools to enable the agile team to deliver quality software based on user feedback.

• Develop scripts to automate build, software release, application deployment and system and application management.

• Collaborate with team members to improve the company’s engineering tools, systems and procedures, and data security.

• Conduct automated system level vulnerability security scan, harden system and application platform.

• Liaise with 3rd party software and hardware vendors to manage and resolve incidents and technical issues.

• Liaise with 3rd party hosting providers to manage.

What we are looking for

• Past track records in Solaris UNIX/Linux/Windows Systems Administration.

• Expert in code deployment tools (GIT, Nexus, Ansible, and Chef).

• Exhibit expertise in software development methodologies.

• Knowledge in setting up DevOps tools such as Git, Jenkins, Bamboo, Docker, Kubernetes, Puppet and Ansible.

• Past track records in virtualisation / container technology and setting up continuous integration / continuous deployment process and tools.

• Knowledge in application development and setting up of middleware.

•Knowledge in vulnerability assessment and remediation will be added advantage.

• Knowledge in setting up and maintaining databases will be added advantage.

EA License # 14C6941

ACMV engineer is responsible for the engineering and technical disciplines needed to complete a ACMV project. He/she works to plan projects, establish project criteria, coordinate project reviews, and ensure the proper implementation of project elements.

Roles and Responsibilities:

• Assist Project Manager and site personnel in planning, execution, and completion of ACMV projects.
• Attend site tests and inspections to ensure quality standards and all health & safety requirements are adhered to.
• Supervise and liaise with relevant authorities, subcontractors, and workers on site to ensure quality standards and all health & safety requirements are met.
• Assist in the preparation of progress payment claims and variation orders as required.
• Analyze, manage, and track project costs against budget.
• Perform any other tasks assigned by the management.

Requirements:

• Diploma / Degree in Mechanical Engineering or its equivalent
• At least 3 years relevant experience in project management, preferably in handling ACMV and within construction industry
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively.
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Good interpersonal skills and pro-active in problem solving

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering

Reporting to the Project Manager, you will be responsible in securing and managing security & communications related system projects and third-party product & systems.

• Member of Project team, responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects;
• Preparation of engineering design and documentation and follow up on quotations;
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation;
• Review contract scope, requirements and all costing to ensure designed systems meet customer’s requirements;
• Co-ordinate with customer, contractor, and work closely with internal departments to ensure projects are completed on schedule;
• To improve on project profitability;
• Supervise and monitor progress of works on site;
• Ensuring smooth progress and completion of projects within budget/cost and time and quality standards;
• Responsible in project closure, project audit findings if any and follow-ups;

• Diploma in Engineering or its equivalent;
• With 3 or 5 year's relevant experience in related industry;
• Knowledge in project management is a must;
• Strong customer focus,team player, independent and result-orientated;
• Excellent presentation, communication and negotiation skills with the ability to communicate effectively across all levels;
• Energetic and high level of work commitment with a positive mindset;
• Demonstrate abilities to work in a fast paced environment and able to work in cross functional teams.

Job Description

• Provide engineering support for wide range of products (RF/Mixed Signal / Digital) through all phases from development to production release
• Work closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement
• Close interaction with Product Test Engineering team and Communicate technical product status to management
• Establish with customers on product testing requirements and production release requirements
• Follow up with Foundries and test subcontractors/SAT houses to resolve all production issues.
• Provide detailed status reports at each phase, test limit (guard band) generation, correlation and yield summary reports
• Support Yield improvement, Test Time Reduction and retest rate improvement for production ramp

Job Requirements

• Degree/Diploma in Electronics / Electrical Engineering
• Minimum one year relevant experience on the Product/Test Engineering with foundry process background preferred.
• Solid understanding of test concepts on digital , Mixed Signal and RF products
• Hands on experience using Advantest 93K ATE is added advantage.
• Good experience with statistics and data mining.
• Strong Data analysis skill & exposure on any Statistical Analysis Software’s JMP, CEDA or Data power and Optimal plus tool knowledge is a plus.
• Knowledge in scripting (perl/java/vba) and automation in reporting is a plus.

Understanding and carrying out all tasks given by the Senior Engineer.

Collaborating with other engineers and workers to design, develop, test, and improve products and engineering processes.

Ensuring all expenses stay within the allocated budget.

Performing regular inspections of equipment and scheduling maintenance or repairs.

Providing assistance to different staff or engineering teams.

Inspecting inventory and reporting inconsistencies as well as ordering more materials.

Producing CAD drawings according to specifications.

Evaluating all products and processes and ensuring standardization of quality assurance measures.

Participating in various learning experiences, which may include attending workshops and training sessions.

Calibrating and troubleshooting equipment as required

• Must have 5 years of administration experience of Storage Arrays of multiple vendors like EMC, Hitachi and Netapp
• Must have Administration experience of Different Cloud platforms like AWS and Azure.
• Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Experience on AWS Cloud Specific technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi AZ VPC Instances
• Good Understanding of AWS Elastic Block storage(EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Storage performance tuning and troubleshooting.
• Incident management and change management process knowledge.
• Project handling experience from sizing to roll-out, preferably with project management background
• Strong analytical skill, very initiative, good planning & systematic execution.

Our client, one of world’s largest financial services institutions is looking for:

Test Engineer

Responsibilities:

• Execute testing of SSD on server platforms to validate functionality.
• Perform debug and analysis of failures towards resolution of failures observed.
• Participate in setting up of test environment and servers in preparation for validation.
• Tabulate test results and generate report for continuous firmware health monitoring.

Requirements:

• Degree in Computer/Electrical/Electronic Engineering.
• Basic working knowledge with Windows and/or Linux.
• Experience in the setup and/or debug of laptop/desktop/server systems would be an advantage.
• Knowledge in Python scripting and/or experience with basic signal/power measurement equipment is preferred.
• Experience in using PCIe/NVMe bus analyzers and Analog/Mixed Signal oscilloscopes would be beneficial.
• Comfortable working in an ESD-protected lab environment.
• Complete Execution of Validation Find-Fix cycles – Continuous running Deliverable
• Performance of first pass failure analysis – Continuous running Deliverable

-----------------------------------------------------------------------------------------------------

Interested applicants can also email CV at [email protected] (for faster processing, please state the exact job/position title applied “Test Engineer”)

Only shortlisted candidates will be notified.

-----------------------------------------------------------------------------------------------------

EA License Number: 10C3636
EA Personnel Name: Jagveer Singh Arora
EA Personnel Registration Number: R22109615

Role Responsibilities

• With strong program design ability, able to complete the program design of the project as the backbone;
• Familiar with domestic and foreign building codes,
• Have good communication and coordination skills, can accurately understand and grasp the needs of the project and the owner;
• Responsible for the external coordination of general design projects and the company's internal design management;
• Responsible for the audit and technical check of the construction scheme and construction drawing according to the project work plan;
• Responsible for the review of architectural drawings or related documents, project responsibility, professional responsibility and other related columns;
• Responsible for the technical treatment of the project construction stage;
• Responsible for constantly reviewing and optimizing the company's general architectural drawings, and formulating professional architectural design techniques and drawing standards;
• Responsible for hosting the monthly architectural technology exchange meeting and project summary meeting from time to time to improve the design level;
• First-level registered architect qualification is preferred;

Role Requirements (Must-Have Skills)

• Experience in pharmaceutical equipment engineering is preferred.
• Bachelor’s degree in architecture, more than 5 years of architectural design and construction work experience, have a deep understanding of architectural design theory and construction drawings.
• understand the construction technology, interior design and engineering construction process, proficient in AutoCAD, 3D, Power-point and other software.
• First-level registered architect qualification is preferred;
• Accept extended travel

Utilities Engineer (Tuas/1 Year Contract/ Up to $8000)

The Utilities Engineer will be responsible for ensuring the facility, equipment and systems are maintained in accordance with the detailed design and that GMP qualification is achieved and complied. The engineer will be the Subject Matter Expert (SME) for the Utilities system operations, maintenance and provide technical/expertise to ensure readiness for routine operations.

The engineer shall ensure adherence to standards and good engineering practices. This includes ensuring the design meets the requirements of Manufacturing, Quality, Information Systems, and Engineering groups. Support development of commissioning and qualification documents to ensure the utilities system is qualified per regulatory requirement. The engineer will have to also be able to independently resolve technical issues, escalate problems, work in teams, and promote sharing of lessons learned.

Responsibilities:

Operational Excellence, continuous improvement and day to day operations

· Lead/ Support continuous improvement for Utilities system operations, maintenance and reliability program.

· Establish metrics that ensure optimal utility operational performance.

· Lead/ Support system owner in Utility Projects - review of Engineering design documentation and associated engineering drawings.

· Lead/ Support Site Acceptance Test (SAT) and commissioning and testing of System to meet the User Specification Requirements (URS).

· Participate in system walk down to ensure reliable operations of utility systems.

Safety and Quality Compliance Management

· Lead/ Support in Audit readiness for regulatory inspections to ensure compliance to all relevant site SOPs, global SOPs, GEP and GDP.

· Provide support to the development, revision, review, and approval of Standard Operating Procedures, Risk Assessment, Preventive maintenance program and Job Plans.

· Lead/ Support deviation investigation and ensure Corrective and Preventive Action (CAPA) is in place to prevent recurrence of similar incident.

· Lead/ Support Change control or change evaluation initiatives for continuous improvement to enable better system reliability and operations.

· Actively practice Company's Safety Culture

Sustainability

· Lead/ Support Site Sustainability program - Analyze Energy consumption data, benchmark the overall usage/consumption, and evaluate opportunities to optimize its usage.

· Lead/ Support the development of business case to drive the site goal on sustainability targets.

· Generate utilities consumption data for authority submissions.

Basic Qualifications

· Diploma/Degree in Engineering, Mechanical, Electrical, Chemical

· Ability to work independently and collaboratively

· Good interpersonal and communication skills with high computer literacy

· Strong team player, able to effectively work within and across teams

Preferred Qualifications

· Fluency in communications skills, both oral and written, including presentation skills

· Familiar with documentation in a highly regulated environment

· Interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met

· Ability to tactfully negotiate and positively influence peers

· Strong analytical skills to identify potential improvement opportunities

EA License No. 01C4394 • RCB No. 200007268E •EA Registration No. R22109454 Malcolm Lee Jun Hao

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects
• Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

The Role

• Get to experience what it is like to work in a team and how they collaborate on a project.
• Attend team meetings to get a better sense of the project and understand team dynamics
• Responsible of a user story development
• Explore different frameworks, by being a part of the development of a UI from a web application
• Contribute on both front and backend technologies

Responsibilities

• Full Stack developer responsible for development of both front and back end using modern techniques and frameworks
• Get experience in microservices architecture
• Experience in containerization with Docker and Kubernetes
• Automated test implementation with Cypress

Qualifications and Profile

Good for candidates to have

• Understanding of Object Oriented analysis and design using common design patterns.
• Java, SQL, and code quality skills.
• Basic understanding of the Spring Framework, Microservices architecture and API.
• Excellent Aptitude, Curious to learn and inquisitive.
• Excellent communication and interpersonal skills.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

Functional

• Basic understanding of general banking, finance and investment banking.

Other Professional Skills and Mind-set

• Strong organizational and communication skills
• Strong sense of ownership and drive with customer focus
• Strong ability to analyze and summarize
• Strong interpersonal skills
• Skilled in providing oversight and mentoring team members

Education & Work Experience:

• Pursuing or Completed Master’s/Bachelor’s program.
• Master’s/Bachelor’s degree in Computers Science/IT or equivalent domain.

Pleaes apply via link:

https://app.jobvite.com/j?cj=otFNufw9&s=URL

• 5 days, Alexandra (South-West), walking distance from MRT
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Suppor current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time
• studies

Interested applicants, please send your resume to [email protected]

Location: East

Job Scope:

• Follow the Project Management Process from award until handover including all statutory requirements and deliverables
• Develop comprehensive project plan for multiple projects
• Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project to ensure project progresses on schedule and within budget.
• Coordinate and be involved in pre-& post tender survey for SED/ ordering and pre-con survey on the existing building (applicable to MOD projects only).
• Sell variation orders timely to reach financial objectives.
• Provide regular project management reports for management during Work in progress (WIP) review.
• Directs and coordinates activities of project team which includes attend site meeting, involve in all internal and external inspection / handover of projects for public use with no critical defects and place order for spare parts via spare parts finder database.
• Attend monthly Work in Progress (WIP) meeting with Commercial and EI Finance Controller.
• Coordinate daily activities and resolve technical problems internally with factory, Sales Engineering Department, Drawing Office and externally with our suppliers and contractors.
• Manage cost and pre-empt / highlight potential cost overrun and late delivery of project.
• Ensure compliance to Organizational Norms, policies, procedures and requirements of the process and quality hold points defined in the work instructions of the Top Range Excellence / Fulfilment Plus process.
• Sign off as defined in ON 17100 for major projects, execute all contractual terms to continuously protecting financial entitlements.
• Demonstrate safety leadership, conduct periodically quality walks, safety walks and safety inspections.
• Responsible for the employee and subcontractor safety compliance at project sites and conducting safety walks on regular basis

Job Requirements:

• Min. Degree in mechnical/electrical engineer or any relevant field
• No experience required as training will be provided
• Able to start immediate or within a short notice preferred

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599

Salary -

CNC Experience - ($4,000 - $4,500) + transport allowance

No Experience - ($3,800 - $4,000) + transport allowance

Mon - Fri, 8am - 5:15pm

Job Description:

● To repair & service CNC machines in the region

● To implement service programmes for customer service

● Machine Installation

● Documentation (Service report, Machine registration, filing and record)

Job Requirements:

● Minimum Diploma in Electrical / Mechanical / Mechatronics Engineering

● Possess valid Class 3 driving license

● Minimum 2 years experience in servicing CNC Turning or/and Milling Machines

● Singaporeans only

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Senior Process Engineer [Oil & Gas | EPC Industry]

• Basic: $5,500 - $6,900 (Depends on EXP)
• Working Hours: 5 Days
• Location: South (Near MRT)

Interested applicants can sent your CV to email [email protected]

About Our Client:
We are representing a globally recognized EPC contractor in the Oil & Gas and Petrochemical sector. Renowned for their commitment to engineering innovation and excellence, our client is dedicated to delivering impactful projects that shape the future of the energy industry. They provide a stimulating environment that encourages creativity and rewards dedication, allowing team members to grow professionally in a supportive and highly collaborative setting.

Why Join Them?
Step into a role where you’ll work with some of the best minds in the industry, contributing to complex, large-scale projects that push the boundaries of engineering. Our client offers a culture of continuous learning, cutting-edge technology exposure, and a strong commitment to personal and career development. This is your chance to advance your skills and make a meaningful impact in an industry that values technical expertise and innovative solutions.

Job Summary:
As a Senior Process Engineer, you’ll be at the forefront of designing and optimizing process systems for major petrochemical facilities. This role involves leading process design, performing complex calculations, and reviewing detailed engineering drawings to meet client and industry standards. You will guide engineering teams through every stage, from feasibility studies to detailed design, ensuring efficient and sustainable solutions for high-profile projects.

Key Responsibilities:

• Spearhead process design efforts for major projects, covering feasibility studies, FEED, and detailed engineering.
• Lead tendering and project execution for EPC/EPCm ventures.
• Develop essential deliverables such as specifications, PFDs, P&IDs, and operating manuals.
• Conduct simulations and calculations to optimize project outcomes.
• Design critical industrial components, including reactors, heat exchangers, and compressors.
• Oversee design reviews, HAZOP, IPF, SIL assessments, and 3D model evaluations.
• Provide on-site support during construction and commissioning phases.
• Manage project schedules, manhours, and liaise effectively with clients and internal teams.

Requirements:

• Bachelor’s degree in Chemical Engineering.
• At least 10 years of experience in process engineering, with a preference for the Oil & Gas or Petrochemical sector.

Skills:

• Proficiency in simulation tools like PRO/II, HYSYS, and HTRI.
• Strong leadership abilities and analytical skills, with a talent for interpreting technical data.
• Excellent communication skills, with a keen eye for technical detail.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Job Description:

• Responsible for ensuring that the Electrical Integrity Inspection scope of work is executed with technical excellence, acting as a technical reference and local legal representative, focusing on the Electrical Integrity Management Process, ensuring the execution of inspections, generation of recommendations, quality assurance and quality control of subcontractors, and development and improvement of inspection plans, in order to maximize reliability, availability, maintenance, safety and integrity of assets (RAMSI), as well as contributing to the Operations procedures and achievement of results established for the business.
• Support MdB's annual corporate budget planning (expenses and investments) by participating and advising the team on corporate planning, providing information on workforce planning for Electrical Integrity Inspection and on resource needs, services and materials and other expenses used in its activities.
• Guarantee the continuous improvement of IMS by monitoring projects status and ensuring that IMS Documents under Reliability Coordination are updated and implemented.
• Reference to assist in the analysis of inspection results, traceability of information, proper root cause elaboration, and issuance of technical review/recommendation.

Education & Experience:

• Minimum 12 year experience operating with Oil and Gas industry
• Minimum 18 year experience working as Electrical Engineer
• Experience with FPSO is preferred
• Bachelor in Engineering

Job Responsibilities:Design and develop software/GUI for web and mobile application
Implement web, desktop and mobile application
Design, develop, test, integrate revise, delivery and deployment of software
Translate customers’ requirements into software design
Software design development, testing and troubleshooting of the solutions
Provide technical expertise and solutions to meet customers requirement and submit proposal
Collaborate with product management, engineering to define and implement innovative solutions for product directions, visuals and experience
Develop, define and refine UI/UX best practices for the desktop web and mobile applications
Ensure technical feasibility of UI/UX designs
Optimize application for maximum speed and scalability
Deliver project within schedules and deadlines
Assist in project execution and operations
Manage and maintain office IoT asset
Hardware configuration and set up
On-site software support and server maintenance
Remote software assistance and support
Demonstrate software application

*If interested, please send your resume to email ([email protected])

Job Description:

Project Management

• To resolve all technical and non-technical issues
• To ensure the tracking and monitoring of items per contractual requirement
• Responsible for submission and monitoring of technical drawings, method statements and proposals
• To ensure construction meeting client & regulatory requirements
• To carry out short-term planning to meet site progress
• To co-ordinate, program and monitor site work, materials, plant & equipment
• Carry out project objectives to align with company goals
• Reduce material wastages on site and maximise usage of machineries/equipment
• To control the allocated direct workforce effectively
• Follow approved construction method that is cost effective, productive & without compromising on Quality & Safety

Job Requirements:

• Willing to relocate in Singapore & visit construction site
• Possesses a Bachelor Degree in Civil Engineering or equivalent
• Have knowledge in the preparation of engineering project proposals and method statements
• Able to understand the drawings and scope of works
• Can work independently and willing to learn
• Fresh graduates without experience are welcome to apply

Position Summary

You will be responsible for designing, developing and testing of our crypto trading platform. You will be building and maintaining trading systems, working alongside internal and external stakeholders to transform ideas into deliverables, ranging from minimum viable products to enterprise scale systems.

Job Responsibilities

• Collaborating with stakeholders across departments to gather requirements and timelines that meet both business and engineering needs.
• Empower traders with advanced risk assessment tools and real-time analytics to make informed decisions and minimize potential losses.
• Implement robust monitoring protocols to proactively identify anomalies and performance bottlenecks, ensuring uninterrupted trading operations.
• Facilitate seamless collaboration with partners and external vendors to ensure smooth technical integrations.
• Continuously evaluate and implement relevant emerging technologies to enhance the company’s platforms

Job Requirements

• Bachelor or higher degree in Computer Science or related field of studies
• At least 1-2 years+ relevant experience
• Ideally prior experience with trading systems, infrastructure, algorithms, and connectivity either in Crypto related companies or traditional financial institutions
• Understand market-making algorithm requirements to be able to conduct testing, deployment and troubleshoot in real time.
• Proficient in at least one strongly typed programming language such as Go, Java, C++ etc.
• Strong entrepreneurship mindset and the ability to contribute both as an individual contributor
• Ability to work in high pressure environments to meet deadlines.

Roles & Responsibilities

Apply environment protection procedures.

Apply operation policies and standards.

Assist Safety Officer on site issues.

Conduct Workplace Safety & Health (WSH) activities according to requirements.

Conduct on-going improvement activities and performance improvement strategies.

Estimate resources required for project activity.

Assist in planning and scheduling project timelines, forecasting of resources and planning project budget.

Monitor the progress of the lift installation sites and update promptly.

Highlight and coordinate all technical problems encountered.

Examine the results of different problem-solving solutions.

Explore, recommend, and implement improvements and preventive measures on operational issues.

Perform the basic risk assessment.

Report WSH incidents.

Suggest WSH solutions for the existing processes.

Attend regular site meetings and liaise with Main Contractors, Architects, Consultants and Clients pertaining to site matters arising from the projects.

Work in partnership with partners to include transportation operations within logistics operations.

Work with resources in the interest of business activities.

Requirements:

Diploma/Degree in Electrical/ Electronics/ Mechanical Engineering or equivalent.

3 or more years of relevant experience in Lift industry preferred.

Proficient in MS Office

Preferably possesses own transport.