Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description & Requirements

Job Description:

To work with customer to identify and verify the scope of work

To work with customer or customer’s site project manager to develop project schedule

To work with project installation team to develop project installation schedule

To plan weekly work schedule with scheduler for the installation team

To work with project installation team to complete the weekly project monitoring report

To ensure timely progressive monthly project billing

To ensure that work site safety regulations are being enforced

To provide and monitor scope of work on project variation work for salesperson

Ability to work under pressure and resolve problem independently

Job Requirements:

Candidate must possess at least Professional Certificate/Nitec, Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical/Electronic), Engineering (Mechanical), Computer Science/Information Technology or equivalent.

At least 2 Year(s) of working experience in the related field is required for this position.

Preferably Junior Executive specialized in Engineering - Electronics/Communication or equivale

Responsibilities:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with the Contractors of the IWMF and also TWRP.

• With a focus on inter-disciplinary construction management, assist the CRE to coordinate the existing team of discipline Lead Resident Engineers as required, including liaison with our in-house Engineering Design Manager (EDM) on any outstanding design issues that may affect immediate construction activities.

• Lead and coordinate the construction work interface between IWMF contractors and TWRP contractors works and tie-ins etc and in particular with counterpart Interface Manager from TWRP.

• Lead and set up interface meetings between the various Contractors to drive the Contractors to resolve their coordination and tie-in point issues.

• Coordinate with BIM Manager and set up interface BIM walk through sessions as required with the Contractors.

• Project delivery planning updates for the interfacing/tie-in points from the IWMF/TWRP Contractors with a specific focus on MEICA issues given the stage of the project.

• Coordinate and expedite internally on urgent RFA/RFI submissions with regards to interfacing matters, in particular between EPC1 and EPC2 but also with IWMF and TWRP.

• Attend other site meetings as required by CRE and coordinate internally to resolve technical issues with the Contractors with regards to interfacing matters with a specific focus on MEICA issues given the stage of the project.

• Attend and follow-up on interface/coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, interface meetings with TWRP, etc and as required for the coordinated completion of the Works under each contract as they lead into the Testing and Commissioning phase of the project.

Requirements:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

* Office hours, Monday - Friday

* Location: MacPherson

* Basic + Allowances + OT + Bonus

* Permanent

Our client is a company who providing data recovery, storage solution in Singapore.

Responsibilities:

• Delivery and implementation of IT Project.
• Follow process workflow on implementation procedure.
• Update project manager and reported manager / lead on the project status and progress.
• Work with product principle to resolution deployment issue.
• Will be expected to handle multiple projects at any time.
• Willing to learn attitude on assigned task.
• Can work independently and responsibility on task assigned.
  

Requirements:

• Skillset on Virtualization, Windows and Linux Implementation.
• Knowledge of storage, server and backup software will be an advantage.
• Possess a Degree / Diploma in IT / Computer Studies or equivalent.
• 1 to 3 years of working experience in Server Operating System implementation.
  

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Electrical) for the next phase of their business. They are located in West.

Duties:

• Lead Electrical discipline for CAPEX projects, supervising consultants, contractors, and vendors.
• Develop and issue Electrical design bases, specifications, and scopes of work.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Approve Electrical deliverables and develop necessary project documents.
• Support regulatory approval processes.
• Collaborate with project management and engineering teams.
• Witness factory acceptance tests (FAT).
• Ensure accuracy of engineering databases (e.g., SmartPlant tools).
• Review and document as-built deliverables.
• Follow Quality Management System and QA plans.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 15 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

The Snr EUC Engineer manages the IT support function. He provides management to a group of IT professional and support staff and focuses on setting goals and priorities. He/She plans and directs the information processing activities of the organisation and coordinates the effective design, implementation and operation of management information systems and applications. He oversees the maintenance and upgrading of support systems and conducts on-site training to promote efficient operations.

Implement IT Support Service Plans

• Lead the implementation of support services across the organisation

• Define best practices and Service Level Agreements for the support function

• Establish performance and reporting measures to provide an effective and efficient level of service

Manage IT support Activities

• Identify actions to maintain or improve levels of service

• Advise the business on IT support metrics and capabilities

Oversee System Maintenance

• Prioritise activities to ensure continuity of service and prompt issue resolution

• Oversee the compiling of data for reporting purposes

• Review trends and patterns

• Plan installation of hardware equipment, software and maintenance agreements

• Recommend acquisition of new technology and software

Provide Incident Resolution Guidance

• Analyse enquiries to identify recurring user problems, recommend solutions, and to identify areas where service can be improved

• Respond to more complex, escalated enquiries from team members

• Evaluate results of investigation reviews

• Develop problem solving guidelines, checklists, or other materials to assist staff to respond to user problems that are recurring or routine

• Oversee disaster recovery planning and testing

Requirements:

• Have prior technical knowledge on End User Computing technologies, not limited to Desktop Endpoint Management, Win10 / 11 Security Patch Management, Asset Management, GPO policy management, Active Directory Administration, Win 7 / 10 / 11 migration (plus point), M365 administration (plus point), SCCM & Bitlocker (MBAM) administration (plus point), Software deployment management (plus point)

• Have vendor management experience or have experience managing subcontractors will be an advantage

• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 8+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Our client is one of the leader in the semicon industry, they are hiring a NPU Implementation Engineer for a 12 months contract

Job Description:

• Responsible for physical design and development activities of Client’s NPU Design
• Involve in activities encompass physical design and analysis of complex and PPA critical NPU
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization
• Implementation flow development
• Work closely with Client’s colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

Job Requirements:

• Bachelor’s/Master’s Degree in Electrical/Computer Engineering
• Knowledge in Neural Processor Unit Familiarity, Silicon Debug and/or Functional/Direct Test Verification
• Familiar with assertion-based verification (SVA) & System Verilog language
• Knowledge in Processor verification, FPGA verification and/or Formal verification
• Familiar with Synopsys ICC2/FC (preferred) or Cadence or Magma tools from netlists to GDS is a plus
• Knowledge in high speed implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification) is a plus
• Knowledge of high-speed/low power IP and custom circuit design is a plus
• Familiar with power noise and reliability tools such as Redhawk and Voltus
• Good communication and scripting skills

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Highlights

• AWS + VB + 5 days
• Mechanical/ Electrical
• Bedok/ East
• Escalator/ Elevator/ Lift

Job Responsibilities:

• Lead in-house Testers for lift testing and commissioning of the new installation projects at private commercial, HOB and town council and need for assistance at lift modernization if required
• Manage and ensure that the lift adjustment, testing and commissioning is safe during activities
• Manage on-site and monitor the testing process according to instruction and schedule
• Report Testing progress to Department Head/ Manager
• Manage and ensure safe, high quality, and timely testing of the equipment throughout the testing process
• Prepare lift adjustment training material and provide testing training for the in-house testers skill improvement
• Provide supervision to testers and support technical to troubleshoot testing problem if it is necessary
• Responsible for all the arrangement with 3rd parties such as SPE inspection, TMS inspection and participate RI, Client inspection related with lift testing
• Responsible for the annual calibration test of testing tools and equipments
• Responsible for the internal/ external audit inspection such as ISO 9001, ISO 14001 and ISO 45001 and Jsox etc and also updating the Documents if required
• Assist in project management if required
• Perform any other duties as assigned by Department Head/ Manager

Requirements:

• Minimum Diploma in Engineering
• Must have lift / escalator background or industry
• Able to lead technician

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Pierre Chung Yih Shern

EA Personnel Reg No: R22111092

Min 2 yrs. of SD agent working experience

Good Laptop/Desktop troubleshooting skillsets

Excellence customer handling skills

Excellence communication skills

Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

GENERAL DESCRIPTION

The incumbent is SME to RPA process and development.

MAIN DUTIES

• Assist with process discovery and assessment, conduct requirements workshop with various business units to identify potential automation opportunities
• Documenting Software Design Document (SDD) with as-is and to-be solution.
• Support business stakeholder/users to define RPA strategy and delivery plan to ensure smooth implementation
• Assist with assessing risks and device mitigation plan along with key stakeholders
• Set-up infrastructure to ensure the availability of IT infrastructure and Blue Prism platform for User Acceptance Testing (UAT) and production.
• Accountable for managing end to end RPA delivery from analysis, design, coding, UAT, deployment and post-production support.
• Accountable for the RPA environment management, patch management, planned maintenance and backup & restoration process based on the defined SLA
• Provide run support for day to day IT management and service management (i.e. incident management and problem management) to ensure smooth run operation in run mode
• Trigger and follow the provisioning of new robots in terms of machines, credentials and access rights
• Responsible for the overall developments of the RPA processes by maximizing the overlap between processes and the management of an object library
• Review and approve the transfer of an RPA process for UAT to Production systems.
• Accountable for the scheduling of Robots in Production
• Ensure project team follows best practices and guidelines.
• Develop Automation operational handbook to ensure smooth transition to production support team
• Manage stakeholders and provide regular updates.

WORK EXPERIENCE REQUIREMENTS

• At least 4 years of Hands on Robotics Process Automation development experience (strong preference for those with Blue Prism experience) and others tool like Automation Anywhere (preferred), UIPath (preferred).
• Strong BluePrism (or equivalent Automation software) configurator knowledge and administrative exposure
• Experience of setting up and managing RPA IT environment
• Good understanding of Robotics technology solutions and underlying IT services
• Strong experience in service readiness frameworks and best practices
• Strong knowledge of Excel VBA, Scripting, .NET, SQL
• Good Communication skills - Written and Verbal.

EDUCATION REQUIREMENTS

• Bachelor in Computer Science or related IT degree

The Role:

We would like to get on board a Telecommunication engineer (or similar) to work inside of the railway communication infrastructure area, to develop and deploy communication transport solutions (fixed and radio) for large international railway projects. Main tasks to be performed by the COMMS engineer:

o Analysis of project requirements and propose the solutions accordingly.

o Development of system technical specifications.

o Development of system architectures and integration with 3rd parties' systems.

o Technical interface with customers and other contractors.

o Realization of testing and commissioning works onsite.

o Network troubleshooting for wired and wireless systems both.

o Technical support to systems once into operation after commissioning.

o Onsite testing and commissioning.

The Requirements:

• Tertiary qualification in Electrical and Electronics Engineering

• Minimum 2 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems preferred

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities

Job Requirements:

• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant

Our client is a one of the leading players in the Power & Motor Manufacturing industry. Due to business needs, they are now recruiting a Service Engineer to be part of their Engineer team to support their business needs. They are located in the East - easily accessible.

Job Description of Service Engineer:

• Assist the sales team in identifying optimal solutions during specification processes.
• Collaborate with the global engineering team to address product defects, issues, and technical inquiries.
• Evaluate and recommend engineering products to customers through selection, review, and proposal processes.
• Conduct on-site visits for technical troubleshooting and assessment purposes.
• Communicate effectively with customers to elucidate problems and present viable solutions.
• Cultivate and nurture positive relationships with customers to ensure their utmost satisfaction.

Requirement

• Diploma/ Degree in Mechanical Engineering field
• At least 3 - 5 years relevant experience in handling Marine accounts
• Comfortable in travelling to client sites
• Proficient in SolidWorks/AutoCAD

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a one of the leading players in the Power & Motor Manufacturing industry. Due to business needs, they are now recruiting a Customer/ Field Service Engineer to be part of their Engineer team to support their business needs. They are located in the East - easily accessible.

Job Description of Customer/ Field Service Engineer:

• Assist the sales team in identifying optimal solutions during specification processes.
• Collaborate with the global engineering team to address product defects, issues, and technical inquiries.
• Evaluate and recommend engineering products to customers through selection, review, and proposal processes.
• Conduct on-site visits for technical troubleshooting and assessment purposes.
• Communicate effectively with customers to elucidate problems and present viable solutions.
• Cultivate and nurture positive relationships with customers to ensure their utmost satisfaction.

Requirement

• Diploma/ Degree in engineering field
• At least 3 - 5 years relevant experience in handling Marine accounts

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Leads a team of REs, RTOs, QS and document controller and provide direction for field engineering for system-wide MEICA works which include Odour Control & Air Jumper Facilities and Site-Wide Instrumentation Monitoring for DTSS2.
• Site supervision and commissioning of the system-wide MEICA works including coordination and interface with the DTSS2 contractors and PUB.
• Supports the Project Director, Deputy Project Director and Construction Manager in leading a team of technical professionals to deliver construction and programme management services.
• Ensures the Contractor provides consistent quality of works in accordance with approved drawings and contract specifications.
• Resolves construction and commissioning-related issues raised by Client/Contractors.
• Monitors and reports on Contractor’s work progress, schedule and cost performance and safety records.
• Responsible for the review and approval of Contractor submissions which include but not limited to reports, RFI, claims, specification, calculations and drawings.
• Ensures consistent and thorough submittal reviews of the Contractors’ submission have been done throughout the submittal approval process.
• Chairs meetings, lead discussions with Clients and Contractors and prepare meeting notes.
• Assesses and checks on RE’s and RTOs’ certification on the value of work completed, recommend progress payments to be made to Contractor, and monitors the Contractor’s cash flow projection.
• Resolves contractual issues (which include variations and EOT claims) with the Contractor and recommend to the Client for approval.
• Ensures that records of all works including but not limited to tests, inspections, and minutes of meetings are filed in the DTSS2 Project Information Management System.
• Maintains a high profile in HSES by active participation in HSES audits, inspections and reviews.
• Promotes a near-miss reporting culture and ensure lessons learnt from these near-misses are shared across the programme.

Requirements

• Minimum Degree in Mechanical/Electrical engineering or equivalent
• RE registration accredited with the Joint Accreditation Committee (JAC) of the Institution of Engineers Singapore (IES) and the Association of Consulting Engineers Singapore is preferred
• About 10-15 years of relevant experience in Odour/Wastewater/Conveyance Systems and familiar with the associated MEICA works.
• Experience in managing and administering engineering work in multiple disciplines and multiple contract environment
• Broad working knowledge of all engineering disciplines.
• Conversant with PSSCOC, local building codes, M&E Codes of Practices and regulations
• Good supervisory and management skills
• Strong letter and report writing ability

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Job Responsibilities:

• Network security management (e.g. intrusion prevention system, virtual private network)
• Web security management (e.g. URL filtering, web application firewall)
• End point security management (e.g. anti-malware, device control, application control, data loss prevention or network access control)
• Messaging security management (e.g. anti-malware, anti-spam, content filtering)
• Security & vulnerability management (security information and event management, security device systems management, device and application vulnerability management)
• Automation of management tasks

Period:

• 1 year contract

Working Hours:

• Monday - Friday, 8.30am - 6pm

Salary:

• up to $7000

Location:

• Kallang

Requirements:

• Degree/Diploma in Computer-related disciplines
• At least 5 years of experience that covers management of enterprise security solution n
• Experience in implementation and integration of Cyber Security Platform
• Possess knowledge across various information security technologies/areas in a large enterprise including firewalls, intrusion detection, encryption, Linux O/S, Windows O/S, databases, antivirus, patch management, vulnerability scanning, backup, logging and monitoring, remote access, application development, network security, application security, and change management
• Information Security or IT Controls Certification such as Certified Information Systems Security Professional (CISSP), Certified Information Systems Auditor (CISA), Certified Information Security Manager (CISM) would be an added advantage

Interested applicants, kindly email your detailed resume (MS Word format is preferred):
[email protected] (Registration no: R1107390)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 97C4832)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628