2. Commissioning (Cx) Lead Engineer – Electrical, Data Centre

Role: Leads the commissioning of all electrical systems within the data center, ensuring compliance with design standards and optimal performance for mission-critical operations.

Key Responsibilities:

Develop and implement detailed commissioning procedures for all electrical systems, including backup power systems.

Oversee testing and validation of high-voltage systems, low-voltage distribution, switchgear, UPS systems, generators, transformers, and battery systems.

Coordinate with the design, construction, and operational teams to ensure electrical systems meet redundancy, efficiency, and uptime requirements specific to data centers.

Prepare commissioning reports, test results, and electrical system performance documentation.

Troubleshoot complex electrical systems and propose solutions to ensure optimal system performance.

Ensure adherence to Tier standards (Uptime Institute) and other applicable codes for data centers.

Job duty:

· Coordinate with contractor and customer to plan, organize and scheduling job activities for the assigned project.

· Monitor and control project based on plan schedule

· Represent company for project meeting and discussion with all project stakeholders

· Manage of project according to contract specification and maintain good relationship with customer

· Manage material requisition

· Record scope change and follow up on variation submission and approval

· devising control panels based on site surveys and existing documentation

· creating operations and maintenance documents including equipment schedules, points schedules, site reports and descriptions of operations

· writing bespoke software for each individual BMS project

· designing software graphics for user interfaces

· performing electrical installation checks and completing necessary alterations when issues arise

· completing mechanical installation checks for correct installation and repair if necessary

· surveying sites to provide current documentation of the site, maintenance quotes or energy savings advice

· performing commissioning checks, including both pre-commissioning and post-commissioning, to ensure everything is working as intended

· writing reports for stakeholders and senior management about the work completed, the state of the project as a whole and any other remaining work

· providing maintenance and service work to pre-existing BMS systems to ensure that all controllers and devices continue to operate smoothly

Requirements:

• Candidate must able to write & speak in English; if can speak & write Japanese is addon advantage.
• Working country: Singapore / Japan Tokyo
• Candidate must possess at least Diploma/Bachelor's Degree/Post Graduate Diploma/Professional Degree in Mechanical/electrical Engineer
• Preferably Engineer specialized in Engineering - Electrical/Mechanical or equivalent
• At least 3 Year of working experience in the related field is required for this position
• Energetic, leadership, self-motivated, good problem-solving skills, positive attitude, good written and communication skills.
• Self-initiative and positive thinker
• Committed on job assign

ABOUT MONEYTHOR

Moneythor is an award-winning software company founded in 2013. We provide banks and fintech firms with a modern toolkit to enhance their digital banking services with the prime focus of generating data-driven personalised and contextual recommendations for their customers.

Since inception, Moneythor has set a mission for itself to make digital financial services more relevant, more personal and to wipe out the myth that you cannot get great financial insights when you visit your financial institution online.

Moneythor is headquartered in Singapore and with presence in Dubai, London, Paris, Sydney, Tokyo, and further expansion in progress. Our solution is currently used by financial institutions globally.

Overview:

Are you a driven professional with strong technical capabilities and storytelling skills who is looking to excel in enterprise sales? Do you believe that a great Pre-Sales Engineer can significantly enhance the sales process and drive better outcomes for our clients? If yes, then we want to hear from you!

Moneythor is currently seeking a talented Pre-Sales Engineer to join our Singapore-based team. In this role, you'll collaborate closely with Account Executives to navigate strategic deals through complex sales cycles. You'll shine in solution selling, financial modelling, delivering impactful presentations and product demos, managing technical & functional aspects of RFP/RFI responses, conveying client requirements to R&D teams, and gathering competitive intelligence. Your contributions will play a vital role in driving new customer acquisition, enhancing customer satisfaction, and lifting overall sales team performance.

This role is based out of our Singapore HQ, where we work in a hybrid (onsite and remote) model.

Role Summary:

As a Pre-Sales Engineer, your responsibilities include understanding client needs, designing robust scalable solutions, and delivering compelling proposals. You'll need a solid grasp of enterprise software and cloud technologies, effective communication skills, and the ability to collaborate with both technical and non-technical stakeholders. Your role involves presenting to diverse audiences, from lower-level influencers to high-level decision-makers, adjusting technical depth to suit each audience's needs.

Key Responsibilities:

• Provide pre-sales technical expertise through product presentations, demonstrations, and ongoing consultation.
• Drive adoption of our solutions within strategic accounts, translating technical features into value drivers.
• Develop and deliver materials to improve product knowledge among the sales teams and partners. Maintain up-to-date knowledge about our solution and competitor landscape to help craft effective sales strategies.
• Act as a reference point during pre-sales activities, showcasing in-depth technical & functional knowledge of our solutions.
• Respond to product inquiries and liaise with the solution & engineering teams as required.

Additional Role Breakdown:

1) Product Pre-Sales Consulting:

• Provide technical & functional direction and consulting to prospects and/or partners as part of the pre-sales process.
• Apply standardized approaches to contribute to commercial proposals.
• Maintain a broad understanding of the market to identify additional opportunities.

2) Product Demonstrations:

• Ensure out-of-the-box demonstration environments are available and tailored to client needs.
• Establish demo datasets and scripts for efficient responses to client inquiries.
• Innovate by creating advanced demonstration sets tailored to unique client requirements.

3) Product Innovation and Continued Expertise:

• Develop a learning path to deepen expertise in solution functionalities.
• Contribute to innovation efforts by understanding market trends and competition.
• Act as a liaison between sales and product teams for continual product improvement.

4) Product Bid Response Efforts:

• Lead RFP/RFI response efforts, collaborating on technical & functional responses and commercial proposals.
• Provide recommendations for proposal improvements and bid management strategies.
• Attend sales debriefs to provide feedback on the sales cycle and client engagement.

Requirements:

• 4+ years of solution engineering or pre-sales experience in SaaS/enterprise software sales.
• Proficiency in server-side technologies, data management as well as HTML, CSS, JavaScript, and SQL.
• Strong understanding of SaaS/enterprise software technical aspects, including integration, security and scalability.
• Excellent written and verbal communication and presentation skills in English, with the ability to engage effectively with various levels of internal and external stakeholders.
• Willingness to travel (<25%).

Job Description:

• Working experiences in HDB BTO projects
• Coordinate along with the review of drawings, submission of proposal,query and design for consultant approval.
• Well versed in precast installations and joint details.
• Able to resolve technical issues.
• Laison with Owner, Authorities ,Consultants , Sub Contractor and Suppliers.
• Ensure site operations progress smoothly and on schedule , comply to all authorities requirements and ensure standards and specification for project are properly implemented
• Assist the PM/CM in overseeing the construction activities and progress, planning, implementation, and monitoring work schedules in accordance with the detailed work program.
• Review drawing, plans and verify the structural integrity of materials and designs.
• Ensure progress in accordance with the schedule, quality standards are maintained, site inspections are carried out and technical/drawing issues are resolved on time.
• Liaise with consultants/authorities on drawing and technical issues
• Coordinate the site activities with subcontractors.
• Ensure site safety and preparation safe work documents & procedures with safety personnel.

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering
• Minimum 3-6 years of relevant working experience
• Proficient in Microsoft Office
• Basic knowledge of CAD/BIM.

• Coordinate all related M&E issues on site.
• Resolving site issues and problems
• Assists the project team in ensuring the aspect if M&E complies with the tender/clients specification and all standards and regulations
• Ensuring scheduled work/task complete
• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

Manage construction of assigned projects from start of construction to Commercial Operation Date (COD), ensuring compliance with assigned targets in terms of schedule, cost, while making sure all the internal requirements (e.g. HSE) are fulfilled.

Responsibilities

• Track and monitor project schedules and budget, flagging out any potential deviations in terms of timings and costing, using the corporate tools and platforms
• Manage contractors and other third parties in an effective and efficient manner to ensure projects run smoothly
• Identify potential risks in terms of construction and progress, making sure these are flagged to the senior project manager
• Enforce quality checklists for review or inspection of solar projects
• Manage and interact with client throughout construction

Education/Experience

• Diploma or Bachelor’s degree in Engineering
• At least 3 years of working experience in construction / installation projects
• Prior renewable energy or construction industry experience, particularly solar preferred

Core Requirements:

• Proven track record of effective communications with project stakeholders
• Good project management skills with ability to report in a clear and concise manner
• Excellent interpersonal skills with strong verbal and written communication abilities
• Skilled in project management frameworks (eg. Gantt Chart/Scrum/PMP)

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Working Location: Tuas / Jurong / Changi
Working Days : 5 Days ( Mon- Fri)
Working Hours: 8am-5pm
Salary Range: $2,600 - $2,800

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

About the Role

We are seeking a talented DevOps Engineer to join our team and play a key role in the ongoing development, maintenance, and support of StackOps. You will be responsible for ensuring the platform’s scalability, performance, and security while collaborating with developers, operations staff, and government agencies.

Role Responsibilities

• Participate in the design, development, and deployment of new features, functionalities and maintenance of the StackOps platform.
• Collaborate with DevOps engineers to manage Elastic Cloud integrations, provisioning and configuration management for StackOps.
• Implement and maintain best practices for security, scalability, and performance of the StackOps platform.
• Proactively identify and implement improvements to enhance the scalability and reliability of the platform
• Provide technical support to government agencies using StackOps, including onboarding, troubleshooting, and configuration guidance.
• Stay up-to-date on the latest cloud technologies and monitoring best practices relevant to StackOps.
• Continuously improve documentation and develop training materials for StackOps users.

Job Requirements

• Proven experience in platform engineering, cloud operations, or a related field
• Strong understanding of monitoring tools, methodologies and configurations management
• Experience with infrastructure automation tools (e.g., Ansible, Terraform)
• Familiarity with DevOps principles and practices
• Excellent problem-solving and analytical skills
• Ability to work independently and as part of a team
• Strong communication and collaboration skills
• Experience with StackOps or similar monitoring platforms
• Experience working in a government IT environment
• Programming proficiency in languages like NodeJS, Python or Go

5.5 days

Mon - Fri, 8am - 5pm

Sat, 8am - 12pm

Location: Bukit Batok / Site based

Responsibilities

• Managing and Overseeing daily vessel operations, including movements, documents and risk management.
• Ensuring compliance for Port state.
• Handling and checking ship and cargo documents, including customs compliance for international shipment, raise purchase procurement and purchase order for vessel request maintenance and repair.
• Tracking and reviewing of approved purchase requisition for all vessel.
• Assisting relevant departments with claims such as demurrage, cargo shortage, and commercial.
• Submitting monthly statistical reports, including operating rate statistics, demurrage and voyage reporting.
• Improving ship efficiency and reduce operational risk
• Engaging and deploying sea staff for vessel assignments.
• Managing planned maintenance system (PMS) repairs and maintenance activities documentation and report filling into marine department archive.

Requirements

• Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
• Knowledge of international maritime regulations and environmental standards.
• Minimum 3-5 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.
• Willingness to travel and work in challenging environments (e.g., shipyards or offshore).
• Proficient in English (Spoken and Written) to communicate with team members & Microsoft Office.
• Team player and able to work within time constraints.
• Strong sense of integrity and professionalism.
• He may assign to handle variable projects
• Must from Civil Engineer Background / relevant working experiences
• Keen to explore in marine construction industry

Devon Yang Yue Teng

EA License No: 24C2352

Reg No: R24123723

· Technically sound and consistently designed and delivered to client’s project requirements

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned.

· Assist Professional Engineer in management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Diploma in Mechanical Engineering from a recognized Polytechnic with more than 5 years of working experience in engineering design consulting practice on Building Services projects

· Degree in Mechanical Engineering from a recognized University and eligible for registration with the Professional Engineers Board with more than 3 years of working experience in engineering design consulting practice on Building Services projects.

· Being a Professional Engineer is an advantage.

· Strong project technical knowledge and design softwares

· Good supervision and project management skills

· Excellent with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Lead team of staff for successful delivery of projects

· Strong analytical skills would be preferred

· Excellent interpersonal, good written and verbal communication skills

· Strong time management and resources management skill

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Mandatory Skills

Job Description:

Roles and Responsibility :

• Understanding of Elastic search architecture, indexing, and querying.
• Experience with cluster management, performance tuning, and scaling.
• Proficiency in configuring Logstash pipelines and understanding various input, filter, and output plugins.
• Experience with data transformation and processing.
• Ability to create visualizations and dashboards using Grafana.
• Familiarity with Grafana/Kibana's query language and features for data analysis.
• Experience with data ingestion and ETL processes.
• Understanding of JSON and other data formats.
• Proficiency in languages like Python, Java, or similar for automation and custom scripts.
• Experience in using Java, SpringBoot, JPA, MySql/PostGres DB, Frontend(Angular/ReactJS) technologies
• Proficiency in linux, windows, cloud, containerized based applications
• Skills in monitoring the ELK stack and troubleshooting issues.
• Ability to analyze logs and data for insights.
• Strong troubleshooting skills for identifying and resolving issues.
• Ability to explain technical concepts to non-technical stakeholders.
• Experience working in cross-functional teams.
• Relevant experience in system administration, DevOps, or data engineering.
• Familiarity with cloud and containerized services (AWS, PCF, OpenShift etc.) can be beneficial.

Qualifications:

• Minimum bachelor’s degree or equivalent
• With 5 years of ELK stack experience with Grafana dashboards in banking industry.
• Keen knowledge or experience in Waterfall and/or Agile Methodologies (ITIL, Scrum, etc would be an advantage)
• Ability to articulate and clearly communicate complex problems and solutions in a simple and logical manner.
• Well-developed analytical skills and the ability to provide clarity to complex issues and synthesize large amounts of information.
• Deadline sensitive and able to work independently and under pressure.
• Certifications in Elasticsearch or related technologies will be an added advantage.

Optimum Solutions (Registration Number: 199700895N)is Singapore's leading Information Technology , Consulting and Professional Services company with Competence in Digital Transformation, Automation, Robotics, Cloud, Big Data, Analytics and Emerging technologies projects. Optimum has been successfully delivering IT projects since 1997 and has been a key IT service provider to clients delivering Software Design, Development, Engineering and IT Transformation Projects.

Role : Banking Deployment Engineer

• Current working experience in handling deployment activities specifically in open systems (Linux / Unix) in banking or financial industry.
• Must have recent working experience in open systems Linux / Unix for at least 2+ years
• Working experiencein SDLC process particularly in version control/source code branching strategy.
• Acquainted with Linux/Unix systems and CI/CD tools such as Jenkins, JIRA, Bitbucket, JFrog (Artifactory), Confluence, Git, Rocket Software – Aldon (LMe), Control-M and BMC Remedy
• 1+ years working experience in Banking is a must.

Key Responsibilities:

• Performing day-to-day release/change activities such as deployment of files/binaries to test and live environments/servers during green zone, execution of scripts/jobs per component and supporting test environment availability.
• Coordinating and preparing deliverables for production releases/implementation. This involves working with project team and/or other teams to complete the details required for the implementation.

Roles and Responsibilities

The project team is currently looking for a suitable candidate to join us as a Civil Engineering to drive the ongoing and new projects in the company.

Responsibilities

- Plan and schedule work sequences for construction operation

- To study tender / construction drawings, specifications and contracts to understand project requirements

- Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement

- Perform site inspection and ensure that the work is carried out based on the project specification and construction drawing / final approved drawing from authorities

- Lead a team of supervisors / foreman for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues

- Planning and deployment of resources such as manpower, machinery, equipment and material

- Preparation of progress report, Method Statements and technical submissions

- Ensure the project complies with regulations and clients’ specifications

- Adhere to safety and health regulations and aim for zero accident in the workplace

- To perform ad-hoc duties as assigned

Qualifications & Experience

- Degree/Diploma in Civil Engineering recognised by the Professional Engineer (PE) Board, Singapore or qualifications recognized by the Engineering Accreditation Board (EAB) or Washington Accord

- Minimum 2 years of related working experience in residential and industrial projects

- Good working knowledge in Mechanical and Electrical (M&E)

- Good knowledge of Singapore Health and Safety rules and regulations

- Ability to use relevant drafting and BIM software

- Organizational skill with attention to detail, adaptable and flexible

- Effective facilitation and communication abilities

- Organised, meticulous, with positive work attitude and sense of urgency

NOTE: We are looking specifically for candidates who can write code in C/C++ or Python and have prior experience with robots. There is no strict minimum qualification, but you must have experience in writing code and can read algorithms. If you have a background in R&D, robotics or algorithm design, this role will likely be a good fit for you. If your skillset is limited to the mechanical design of robots, this role is wrong for you. Your familiarity with ROS and ability to write good code WILL BE exhaustively assessed during the interview rounds.

About MyrLabs

MyrLabs is an A*STAR spin-off that creates cutting edge hardware and algorithms. The MyrLabs team consists of driven and multi-disciplinary engineers dedicated to bringing game-breaking solutions for our partners by innovating at the PCB, firmware, and software levels. We work on problems that academia fears to, cannot, or will not address. These are problems that are difficult and require multi-disciplinary efforts. Our approach focuses on the use of non-mainstream techniques to spark creativity and to solve problems in ways that are not seen before.

Job Brief

We are increasing our team size of Robot Software Engineers. This is a position for a research-focused role towards autonomous service robots for indoor and outdoor environments, specifically in the areas of mapping, multi robot orchestration, and control. You would work alongside other researchers to testbed and evaluate new hardware devices and algorithmic capabilities. The work that you do will contribute to new approaches for robot navigation, perception, and instrumentation.

Responsibilities

1. Work with the research team to develop, evaluate, and testbed new robot capabilities
2. Work with other robot engineers to develop, collect data, debug and trial robots in various use cases and environments
3. Participate in the continued development across our product lines

Critical Skills

• Demonstratable expertise with C/C++ and/or Python
• Demonstratable experience with ROS
• Demonstratable experience in robot navigation, perception, or instrumentation

Nice to Haves

• Demonstratable experience working with researchers, participation in research efforts, OR relevant publication in robotics
• Familiarity with combinatorics or metaheuristics algorithms
• Familiarity with parallel, concurrent, or distributed computing

Stance on Skills-based Hiring

MyrLabs has pledged support for the skills-based hiring movement; candidates are assessed based on a ‘skills first’ approach over qualifications. Candidates from ITE or Polytechnics are welcome to apply for the position.

After application, please send your resume, MBTI profile, and portfolio of previous work to [email protected]

You can do a free MBTI test at: https://www.16personalities.com/free-personality-test

☑ Basic $ 4500 - $ 6500

☑ MNC - High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm / 8.30am – 6pm )

☑ East Region – A1 Builder

Job Description

• Develop and manage project schedules from design to commissioning.
• Estimate durations, resources, and prepare progress reports.
• Handle tender submissions, site planning, and progress monitoring.
• Manage EOT claims and oversee RI/TOP schedules and handovers.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction planning building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Job Description:

• Provide assistance, knowledge and user support in all aspects of IT to ensure the company's business gets maximum benefit from IT systems

• Perform system changes and developments to any of company's systems and applications to agreed standards and timescales.

• Provide basic hardware/software configuration, fault finding and problem resolution.

• Conduct routine maintenance, monitoring and administration on IT systems, hardware, network and business applications.

• Provide video and audio-conferencing system support to end users

• Supporting Group Digital projects/initiatives

• Liaise with external support organisations to ensure their service meets company's business requirements e.g. Service Desk, Telecoms provision and support.

• Answer technical queries and meet operational service levels

• Ensure own work satisfies quality requirements and is documented to departmental standards with all associated databases updated.

• Work as a team member and share knowledge with colleagues.

• Work to agreed personal development plans to broaden the skill range available for all systems and application areas.

• Generate KPI’s and reports to share details on the IT service and IT activities.

• Provide user training, hints and tips and other user assistance as required on systems and applications.

• Provide purchasing advice to and purchase IT equipment on behalf of the business, place orders and manage the stock of IT equipment and spares.

• Be available to support the business during ‘out of core hour’ working time.

• Proactively supports and operates solutions and takes measures to enhance processes and improve service delivery.

• Manage incidents and requests from customers.

Job requirements

• A sound range of IT skills, which need to be kept up to date in line with IT developments in the business.

• Have a basic understanding of the desktop and LAN\WiFi\WAN technical domains, involving familiarity with a wide range of environmental components and support tools.

• Good knowledge of computer hardware, Windows and Mac operating systems, and software applications

• Good understanding of mobile / smart devices, Android and iOS

• Good working knowledge of video conferencing platforms, Zoom, BlueJeans, Skype for Business

• Good working knowledge and experience in managing Office365 and Azure

• To demonstrate the ability to acquire and apply new technical knowledge, be able to work without close supervision.

• Work to high professional and personal standards in a disciplined manner to agreed standards and procedures and maintain appropriate databases and documentation

• The ability to work within a complex technical environment and able to perform tasks and resolve problems on a variety of systems and applications

• The ability to work within a team and be willing to share learning and to learn from others.

• Possession of good verbal and written communication skills.

• Maintain good personal skills and an ability to cope with potential conflict.

QUALIFICATIONS AND EXPERIENCE

• IT / engineer related diploma from polytechnic or degree from university

• Microsoft Certified Systems Engineer (MCSE) or a COMPTIA certification would be beneficial.

• ITIL Foundation V3 would be beneficial

• Thoroughness for investigating and monitoring systems and tenacity for resolving the root cause of problems.

• Familiarity with professional development standards

• Thorough knowledge of IT products and the marketplace

• Maintaining a good network of contacts within IT and within the business

• It is beneficial to have experience in the following technical support areas – Windows operating systems, LAN / WiFi / WAN, Office 365, Office products Outlook, Internet Web Browsers, Skype, Zoom, BlueJeans messaging and conferencing.

PREFERRED SKILLS

• Strong interpersonal, communication and presentation skills.

• Must be analytical, self-driven and proactive in keeping up with new technologies and attention to details.

• Independent worker with initiatives, resourceful, positive attitude, friendly deposition, good team player and able to deliver results within tight deadlines.

• Experience of project management tools and techniques to assist in major Information Technology implementation projects.

• Some on-call or after hours work may be required

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly.
• Write, analyze, optimize, and debug product application code to maximize performance and quality.
• Create automated unit tests and integration tests.
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release.
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects.
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices.

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js.
• Experience developing in Node.js development.
• Experience with design patterns, performance/memory analysis, multithreading.
• Agile / Scrum experience including TDD, unit testing, and continuous integration.
• Strong analysis and problem-solving skills.
• Excellent interpersonal skills including verbal and written communication skill.
• Communicates well in English.

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps.
• Experience in integrating with RESTful APIs

Job Description & Requirements

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.

EDUCATION AND EXPERIENCE

• Minimum Degree in Electrical & Electronics Engineering/Computer Studies or it’s equivalent.
• At least 5 years’ experience in programming on Windows (XP and above) environment.
• Good experience in C++, VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.
• Knowledge in PLC will be an added advantage.
• Strong analytical and problem-solvin

• Reports to Construction Manager
• Ensure the quality of all construction work performed on site are in accordance with the company's QA/QC requirement
• Visit project sites, arrange and conduct QA/QC inspections
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice
• Ensure that all project quality records and quality audit plans are maintained.
• Prepare inspection & test plans/check list for site activities Review inspection and testing reports
• Propose corrective action and ensure and timely and effectively carried out to rectify
• Oversee delivery inspection of project materials
• Review, approve and maintain QA/QC related documentation and carry out other duties as assigned

Job Requirements:

• Diploma/Degree in Architectural or Civil / Structural Engineering
• At least 6 years of relevant site project experience in QA/QC roles for construction projects
• Familiar with Singapore Codes and Practices
• Experience with CONQUAS
• Experience with Constructability Score
• Experience with Green Mark Certification
• Able to liaise with workers/Clients, Consultant, Main Con colleagues, subcon and suppliers on QA/QC works and protocols at site
• Location : Punggol (Near MRT)
• Project : Sports Centre

We are looking for a highly skilled Automation Engineer with expertise in Java, Python, TestNG, Groovy, Git, Jenkins, and basic Linux and shell scripting. The ideal candidate will be responsible for developing, maintaining, and executing automated test scripts and automation frameworks to enhance our software testing process. Experience with the Session Initiation Protocol (SIP) and telephony automation will be considered a strong advantage.

Key Responsibilities:

• Develop and Maintain Automation Frameworks: Create, enhance, and maintain test automation frameworks using Java, Python, TestNG, and Groovy.
• Test Script Development: Write and execute automated test scripts to validate the functionality, performance, and stability of software applications.
• Continuous Integration: Configure and manage CI/CD pipelines in Jenkins to support automated testing and deployment.
• Version Control: Utilise Git for source control management and ensure proper versioning of scripts and automation tools.
• Linux and Shell Scripting: Develop and execute shell scripts to support automation tasks and manage Linux-based environments.
• Collaboration: Work closely with software development, QA, and DevOps teams to identify automation opportunities and streamline testing processes.
• Reporting and Documentation: Document test cases, results, and maintain test scripts in a shared repository.
• Troubleshooting and Debugging: Identify, analyse, and troubleshoot automation issues, providing resolutions to ensure test coverage and quality.
• SIP and Telephony Automation (Preferred): Develop and execute automated test scripts for SIP protocol-based applications or telephony systems, and troubleshoot related issues.

Qualifications:

Education: Bachelor’s degree in Computer Science, Engineering, Information Technology, or a related field.

Experience: must have experience in software automation or a similar role.

Technical Skills:

• Proficiency in Java and Python programming.
• Experience with TestNG for test automation.
• Hands-on experience with Groovy scripting.
• Proficient with Git for version control.
• Experience with Jenkins for CI/CD pipeline management.
• Basic knowledge of Linux and shell scripting.
• Familiarity with SIP protocol or telephony automation tools is a plus.

Soft Skills:

• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.
• Ability to work in a fast-paced, dynamic environment.

Following skills and knowledge advantageous :

• Experience in testing telephony or VOIP applications.
• Understanding of network protocols and troubleshooting tools.
• Knowledge of other automation tools and frameworks (e.g., Selenium, JUnit).

Responsibilities:

Working with the development team, you will be responsible for the design development, documentation, testing and delivery of the software solution for an Automatic Fare Collection (AFC) system.

The activities required to be performed shall include the following:

• Requirements gathering;
• Design, development, and maintenance of the software;
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority;
• Assist the Authority with day-to-day application support issues; and
• Liaise with users on the requirement, design and testing issues.

Qualifications & Requirements:

• Recognised degree in Computer Science, IT or engineering with at least 5 years’ relevant experience in software development;
• Gone through at least one full software development lifecycle (SDLC) with experience in producing SDLC documentations;
• Extensive experience in analysing requirements, designing, development and delivering complex enterprise applications in Java/JEE, web programming on UNIX / LINUX and Windows environment;
• Proficiency with database programming such as SQL and DAO, and relevant experience with MySQL, PostgreSQL
• Experience in Spring Framework and Spring Boot;
• Experience in Software Modernization, Containerization, Microservices;
• Experience in Agile development methodology and continuous integration;
• Experience in writing Requirements Specification, Use Cases, Design Documentation, object-orientedsoftware design and UML modelling;
• Proficiency in AWS ECS and Docker containerization, with a solid understanding of DevOps principles and best practices
• Strong analytical and problem-solving skills; and
• Good written and verbal communication skills in English.
• Self-motivated and a good team player.
• Added advantage if candidate is familiar with one or more of the following technologies:

1. Experience in Message Queues and/or Solace;
2. Experience in Cloud Computing, Kubernetes & Dockers, AWS Services like Amazon ECS Fargate, AWS RDS & Lambda;
3. Experience in Automatic Fare Collection (AFC) system;
4. Experience in Microsoft Active Directory
5. Experience in HTML / CSS / JavaScript / JSON
6. Experience in Secure Communications (SFTP, HTTPS, etc.)
7. Experience in Angular or equivalent
8. Experience in Java Unit Tests frameworks

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Position Overview:

We are seeking a highly motivated Embedded System Engineer to join our team as a Research Engineer. The successful candidate will be responsible for selecting, programming, testing micro-controllers, and building corresponding circuitry and PCB for our cutting-edge research projects. This role offers an exciting opportunity to contribute to groundbreaking research in flexible electronics.

Key Responsibilities:

• Program micro-controller for realizing target functions.
• Design circuitry and PCB for corresponding micro-controller.
• Help with requirement analyse and micro-controller chip selection.
• Document design processes, results, and findings for academic publication.
• Stay updated on emerging trends and technologies in flexible electronics and related fields.

Qualifications

Qualifications:

• Master C/C++, have proficient embedded development and MCU development capabilities, and good programming habits.
• Familiar with communication ports, including UART, SPI, IIC and GPIO.
• Able to read hardware schematics, capable for driver writing and optimization, and familiar with Renesas, Nordic and STM32’s commonly used chips;
• Familiar with BLE working principle and commonly used BLE chips.
• Familiar with micro-controller developing tools (e.g. Keil, IAR)
• Experience with PCB design and proficiency in PCB design tools (e.g. Altium Designer)
• Bachelor's or Master's degree in Electrical and Computer Engineering, Electronics Engineering, Mechatronic Engineering, automation, or related field.
• Solid digital and analogue circuit knowledge foundation.
• Excellent problem-solving skills and attention to detail.
• Effective communication and collaboration abilities.

Preferred Qualifications:

• Expertise in MATLAB or Python for upper computer software development.
• Familiarity with biomedical signal processing or wearable electronics.
• Prior research experience in an academic or industrial setting.
• Additional expertise in wireless electronics design

Benefits:

• Competitive salary based on qualifications and experience.
• Opportunities for professional development and growth.
• Collaborative and innovative work environment.
• Access to state-of-the-art research facilities and resources.
• Potential for authorship on research publications, patents and presentations.

Primary Responsibilities:

• To interpret business requirements into technical solutions.

• Participates in projects involving many cross-functional resources and be familiar with the applications, infrastructure and security technologies.

Job Knowledge/Skills:

• A bachelor’s degree in computer science/ software engineering, with knowledge in systems analysis, design and development, software development lifecycle, Application support and maintenance.

• Good experience in eliciting requirements, modeling business processes, data requirements and software development.

• MUST have Min 5 years of solid hands-on JAVA Application development experience with in-depth competency of the following:

• HTML5, Javascript and React-JS

• Java and Springboot development

• Database: MySQL, SQL Server or Oracle

• Rest and SOAP protocals

• Others: Jasper Report, OAuth2, JWT

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible for ensuring robust infrastructure, managing servers, databases, analyzing system operations, and supporting digital transformation in semiconductor manufacturing.

Key Responsibilities:

• Supervising and managing the IT infrastructure to ensure the seamless operation of a semiconductor intelligent manufacturing.
• Leading and driving digital transformation initiatives within the organization to enhance operational efficiency and effectiveness.
• Navigating and overseeing the complexities of international IT projects, ensuring successful collaboration and cross-cultural teamwork.
• Planning, designing, and implementing Fab infrastructure system solutions.
• Performing server, storage, and database management to maintain optimal system performance and reliability.
• Conducting system operation optimization analysis to identify and implement improvements for enhanced performance.

Education Qualification & Essential Experiences:

• Bachelor’s or higher degree in Information-related Degrees
• Over three years of management experience in x86 servers and SAN storage.
• Experience in VM and Linux management.
• Proficient in Windows platform management and DB2, Oracle, or SQL database administration.

Personal Attributes:

• Must be available to travel to Taiwan for a training period lasting 6 to 9 months.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.
• Open to taking on challenging tasks and embracing new opportunities.
• Flexible with availability after hours and skilled at handling on-call or on-site issues effectively.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

We are looking for a highly skilled Automation Engineer with expertise in Java, Python, TestNG, Groovy, Git, Jenkins, and basic Linux and shell scripting. The ideal candidate will be responsible for developing, maintaining, and executing automated test scripts and automation frameworks to enhance our software testing process. Experience with the Session Initiation Protocol (SIP) and telephony automation will be considered a strong advantage.

Key Responsibilities:

• Develop and Maintain Automation Frameworks: Create, enhance, and maintain test automation frameworks using Java, Python, TestNG, and Groovy.
• Test Script Development: Write and execute automated test scripts to validate the functionality, performance, and stability of software applications.
• Continuous Integration: Configure and manage CI/CD pipelines in Jenkins to support automated testing and deployment.
• Version Control: Utilise Git for source control management and ensure proper versioning of scripts and automation tools.
• Linux and Shell Scripting: Develop and execute shell scripts to support automation tasks and manage Linux-based environments.
• Collaboration: Work closely with software development, QA, and DevOps teams to identify automation opportunities and streamline testing processes.
• Reporting and Documentation: Document test cases, results, and maintain test scripts in a shared repository.
• Troubleshooting and Debugging: Identify, analyse, and troubleshoot automation issues, providing resolutions to ensure test coverage and quality.
• SIP and Telephony Automation (Preferred): Develop and execute automated test scripts for SIP protocol-based applications or telephony systems, and troubleshoot related issues.

Qualifications:

Education: Bachelor’s degree in Computer Science, Engineering, Information Technology, or a related field.

Experience: must have experience in software automation or a similar role.

Technical Skills:

• Proficiency in Java and Python programming.
• Experience with TestNG for test automation.
• Hands-on experience with Groovy scripting.
• Proficient with Git for version control.
• Experience with Jenkins for CI/CD pipeline management.
• Basic knowledge of Linux and shell scripting.
• Familiarity with SIP protocol or telephony automation tools is a plus.

Soft Skills:

• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.
• Ability to work in a fast-paced, dynamic environment.

Following skills and knowledge advantageous :

• Experience in testing telephony or VOIP applications.
• Understanding of network protocols and troubleshooting tools.
• Knowledge of other automation tools and frameworks (e.g., Selenium, JUnit).