Job Descriptions

• Pre Project site evaluation of electrical product/meter location and perform range test
• Develops wiring diagrams, layout drawings, and as built drawings for system or equipment modifications or expansion and directs personnel performing installation and maintenance duties.
• Installation, testing and commissioning of repeaters or wireless devices
• Follow safe work procedures to remove/ Install electrical products/meter on site
• Conduct Testing and commissioning of installed electrical products
• Ensure Testing and Commissioning reports in proper order
• Preventive Maintenance (Thermoscan/ Eeprom Downloading/ Data/System Backup)
• Perform troubleshooting and perform appropriate corrective solutions for operational equipment where appropriate
• Soldering of electronics parts
• Internal wiring/ assembly of electrical products/meter
• Burning of firmware
• Testing of defective meters
• Project Coordination to ensure works being carry out as per schedule given by working with partners or contractors
• Manage enquiries, feedback and any other operational issues
• Carries out Site survey, Project management, documentation, testing, user training and commissioning
• To ensure timely completion of schedules and new projects start up through efficient coordination of all function groups both internal and external.
• Team player

Requirements:

• Minimum ITE, NTC/ITC, NITEC in Electrical Engineering or any similar qualifications
• Ability to read and comprehend electrical drawings
• Knowledge of firmware is a plus
• Ability to multi-task and effectively manage concurrent initiatives
• Strong interest in electronics engineering and firmware
• Ability to work effectively in a dynamic working environment.
• Applicant must be willing to work during weekend when required.
• Able to draw Autocad (Would be advantage)
• Minimum 3 years relevant experience

Only shortlisted candidates will be notified.

1. Assist Project Manager on Engineering efforts in technical projects at Semiconductor fabs in Singapore and occasional overseas.
2. Provide on-site engineering equipment start-ups, mechanical parts installation, trouble-shooting and maintenance support.
3. Acts as a Technical Resources in performing repair of Electro-mechanical Assemblies
4. Facilitates continuous improvement project that add value to customer.

Requirement

At least 1-2 years experience in Semi-Conductor Field

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

· Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international

· Provide high level technical support to external customers at their location

· Provide on-­site training to the customers

· Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales

· Develop Service technical documentation

· Create, develop, and continuously improve the customer support & applications knowledge database

· Timely and professionally handle field service calls and issues arising from the field service

· Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international

· Visits, triage with field applications scientists as appropriate

· Timely complete and submit all required paperwork

· Flexible schedule to accommodate our customer’s needs

· Effectively handle multiple priorities, organize workload, and meet deadlines

· Communicate with the customer to ensure satisfaction and implement any necessary corrective actions

· Up to 30% traveling required within Southeast Asia (at times with short notice)

· Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

· 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)

· 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

· Pre-sales support

· Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

· Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.

· Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation

· Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.

· AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Bruker is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics.

INTRODUCTION

As the functional lead, you are responsible for supporting the success of the APJ field and partner marketers by helping to identify development opportunities and supporting team members to achieve their goals.

The Field Marketing Manager is responsible for serving as the main APJ point of contact demand generation/acceleration through effective planning and execution of marketing activities, programs and campaigns including the relevant use of account-based marketing data-driven marketing, inside marketing, digital marketing, events, and more.

RESPONSIBILITIES

In this role, you are delivering against the marketing demand generation and revenue objectives as defined within a specific sales area-based territory, as well as:

STRATEGY EXECUTION

• Development of the marketing strategy and program plan by identifying the appropriate solution or industry program portfolio mix to address the business needs and prioritizing a digital-first, integrated approach
• Drive the relevant approach for teams to deliver on time, on brand, and on budget, while ensuring quality, consistency, and compliance
• Adjust marketing campaign plans and shift resources to respond to changing marketing conditions or pipeline gaps. Lead Management - Strong understanding of internal lead management systems in order to oversee proper access and management of leads and to empower teams to improve lead development, quality and flow throughout the customer buying cycle. Review reports to understand the impact of marketing programs on pipeline health and to follow-up on necessary actions to drive alignment with relevant business stakeholders and manage escalations proactively
• Planning ½ to 1 year with quarterly adjustments
• Translate business strategy and objectives into effective marketing execution tactics to meet marketing and sales goals
• Be digital savvy and able to build a tactical Digital First approach including web, social media, paid search, paid media
• Be fully trained and responsible to ensure brand, quality, consistency, and compliance and promote these aspects within all related demand generation and nurturing activities.
• Collaborate with different teams to provide a balance of marketing activities across all pipeline stages including acceleration and close activities as required
• Serve as the face of marketing to the region or MU sales executive, actively seek for opportunities to participate in business planning and engage in these interactions

FIELD ENABLEMENT

• Look for opportunities to communicate the overall plan to sales stakeholders (sales, sales operations, VAT team members), marketing colleagues and partners
• Drive rollout of marketing tactics and assets that align with the needs of the business
• Communicate proactively with sales teams to understand marketing effectiveness, including digital strategies and performance, and to seek out areas of improvements
• Anticipate stakeholder conflicts, drive managerial resolution
• Proactively provide feedback to other marketers to improve overall marketing performance
• Manage a series of events mix designed to gain brand awareness in target segment, drive new leads or accelerate existing opportunities – trade shows, conferences, seminars, webinars and roundtable/smaller workshop types

REGIONAL CHAMPION

• Oversee regional marketing events/virtual events strategy and successful execution
• Ensure maximum lead generation and marketing automation generate leads, maximise conversion rates and generate sales demand among prospects aligned to the customer journey
• Look to roll out campaigns in a programmatic method to drive efficiencies across markets
• Drive the integration of global programs into regional activities

YOUR PROFILE

• Bachelor's degree. MBA/Master´s degree or equivalent preferred.
• 8+ years of professional marketing experience, with solid experience in marketing execution
• Experience in/with sales
• Experience in B2B marketing
• Marketing strategy development and planning
• Experience in the IT industry
• advanced technical or business skills and special knowledge in one / several areas
• Customer focus with developed acumen to cultivate and develop lasting customer relations
• Experience in a multi-national company
• Minimum 7-10 years of marketing experience, with minimum 5-7 years in marketing execution in an increasing amount of responsibility
• Travel required about 10-20%Guiding and mentoring peers and/or junior level colleagues
  Deep experience in B2B marketing in the IT industry
  Solid experience in delivering marketing demand generation and in execution of marketing activities, programs and campaigns
  

ROLE DESCRIPTION SUMMARY

Thales is seeking suitable candidate for the position of Service support engineer.

You will be maintaining and troubleshooting the hardware infrastructure and systems for a mission-critical Seamless Identity Management Platform for Experience (SIMPLE) system that Thales Solutions Asia (TSA) have designed for Singapore Changi Airport.

You will be part of a team of dedicated engineers that demonstrate superior technical competency in ensuring system availability, performance and security

KEY ACTIVITIES AND RESPONSIBILITIES

As aField Service Engineer, you are accountable for:

· Field Support. To carry out Corrective Maintenance (CM) as a result of failure of the hardware and software related to SIMPLE. To restore the system to its operational condition. To monitor and maintain the records of the overall system operational availability and reliability, including Mean Time Between Failure (MTBF), Mean Time to Repair (MTTR), system downtime duration and the types of hardware defects as well as all related software versions, patches.

· Field Testing. To carry out software testing on the system whenever there is a new software bug fixes. To ensure the correct configuration of the system is loaded for software / system testing and before the system is used for production.

· Spares Services. To manage the spares provisioning, support and test equipment and other tools that are stored at Authority site. To undertake store keeping functions in respect of receipt, issue and disposal. To carry out serviceability check on the spares and to ensure prompt and appropriate action is taken to rectify any fault on the spares. To monitor the end-of-life and end-of-support status of the spares and installed hardware.

· Preventive Maintenance (PM). To carry out PM on the hardware to retain the system in the specified operational condition in accordance to the planned maintenance schedule. In carrying out the PM, to follow the approved PM checklists to perform calibration, servicing and verification of system configurations. To submit the PM report after each PM.

· Calibration Services. To liaise with vendor to perform calibration services on the test equipment that are used for the preventive maintenance.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· 2 shifts of 12 hours, 24x7 operation

· Able to cope in a highly pressured fast-paced environment

· Prior working experience in any Server / Network / Uninterruptible Power System / Security products such as Firewall, PIM and PAM and Server Virtualization will be an added advantage

· Customer orientated with high level of service attitude

· Good listening and analytical skills

· Hardworking, outgoing and enthusiastic

· Positive working attitude

· Team player, and also able to work independently and with little supervision

· Able to thrive in a dynamic environment

· Able to understand the system and architecture diagrams

· Able to understand the user operation environment

· Willingness to pick up new technologies

· Perform other job responsibilities as and when assigned

Education

Diploma / Bachelor’s Degree in IT/Engineering discipline

CCNA certified

Experience

Minimally 1-2 years of experience in supporting network, security, server and UPS

Minimally 1-2 years of experience in supporting mission critical systems with a stringent SLA of 99.9%

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices will be an added advantage

Inside Sales Specialist (Field Services)

12 month contract

Work Your Magic with us!

Ready to explore, break barriers, and discover more? We know you’ve got big plans – so do we! Our colleagues across the globe love innovating with science and technology to enrich people’s lives with our solutions in Healthcare, Life Science, and Electronics. Together, we dream big and are passionate about caring for our rich mix of people, customers, patients, and planet. That's why we are always looking for curious minds that see themselves imagining the unimaginable with us.

Main Responsibilities

• Identifying opportunities for renewal of the existing service plans (and maintenance) for standard and custom systems
• Be proactive in proposing service plans for newly installed standard and custom systems
• Position spare parts as part of the service offering
• Follow-up and keep track of quotes sent (close opportunities)
• Advise customers & Sales representative on the client’s Service Plans & Spare Parts offering
• Guide and support Sales through the different steps of the quotation process, if requested
• Identify new opportunities for a Service Plan (based on past installations)

1. Contact Sales Rep, discuss with them about an opportunity to sell a Service Plan.
2. Create draft quote with all attachments and share it with the Sales rep.
3. Check with Management (specific region), Field Sales Effectiveness (FSE) and coordination team if we have their agreement to assume such coverage.
4. Send the quote to the customer. If the customer already has a Service Plan for other systems, we can add the new system to the quote for the renewal of the existing Service Plan.
5. Follow up on the sent quote (close opportunity).

• Connect with FSE and identify systems that require multiple spare parts or critical spares in customer’s process, promote the client’s Spare Parts Advisory Service.
• Connect with relevant teams to ensure spare parts for custom systems are identified and queries from customer are addressed (feedback shared)
• Provide all relevant information (items numbers for service and spare parts, and documentation) when contacted by Sales reps.
• Create and Track Unite Tickets, and Cases with Kits Spares for spare parts not set up in the CRM (Salesforce)

Requirement:

• Diploma or Bachelor’s Degree in any fields
• At least 1 year of proven inside sales experience in BioFarma industry
• Experience working with Salesforce.com (CRM) and MS Office package (Excel)
• Excellent verbal and written communications skills

Reg No: R22104540

EA License no: 94C3609

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• The Field Service Engineer provides direction and assistance to work group in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning
• Provide general technical direction and assistance to the customer in the operation, maintenance, repair, logistic support, and installation of Veolia’s products
• Provide on-site interpretation of data and technical instruction
• Provide Project and Field Service management with complete and prompt information regarding status of programs, customer problems, failures and trends.
• Provide technical assistance through on-site guidance and training in proper operation, maintenance, and troubleshooting of assigned programs and ground support equipment, including the use and proper interpretation of data and technical instructions
• Provide communication to Product Support and Field Service regarding all program activities and problems through regular, timely reports
• Review reported malfunctions and identify / analyze any undesirable trends
• Make recommendations on findings
• Review effectiveness of maintenance actions in order to identify training needs
• Be one of the focal points for assigned account for all matters concerning Veolia products and services and total support, ensuring that both customer and Veolia objectives are met
• Developing and maintaining a customer preference relationship toward Veolia
• Execute value generating plans and coordinate both internally and externally with the customer
• Outlining, presenting and selling the value of Veolia products and services that can benefit customer needs
• Ensure that all the KPIs set by customer are met
• Ensure customer satisfaction by providing high service standards.

Requirements:

• Diploma or Degree in chemical, environmental engineering. Chemistry or equivalent knowledge and experience are welcome.
• Those with experience in water treatment & field service in chemical industry, will be an added advantage.
• Able to work well and excel in a team. Demonstrates leadership qualities.
• Strong communication skills (both written and verbal)
• Possess valid class 3 driving license.

• The Field Service Engineer provides direction and assistance to work group in order to meet assigned objectives. In this role you will work within defined parameters to make decisions, apply concepts to issues of moderate complexity, and resolve issues through immediate action or short-term planning
• Provide general technical direction and assistance to the customer in the operation, maintenance, repair, logistic support, and installation of Veolia’s products
• Provide on-site interpretation of data and technical instruction
• Provide Project and Field Service management with complete and prompt information regarding status of programs, customer problems, failures and trends.
• Provide technical assistance through on-site guidance and training in proper operation, maintenance, and troubleshooting of assigned programs and ground support equipment, including the use and proper interpretation of data and technical instructions
• Provide communication to Product Support and Field Service regarding all program activities and problems through regular, timely reports
• Review reported malfunctions and identify / analyze any undesirable trends
• Make recommendations on findings
• Review effectiveness of maintenance actions in order to identify training needs
• Be one of the focal points for assigned account for all matters concerning Veolia products and services and total support, ensuring that both customer and Veolia objectives are met
• Developing and maintaining a customer preference relationship toward Veolia
• Execute value generating plans and coordinate both internally and externally with the customer
• Outlining, presenting and selling the value of Veolia products and services that can benefit customer needs
• Ensure that all the KPIs set by customer are met
• Ensure customer satisfaction by providing high service standards.

Requirements:

• Diploma or Degree in chemical, environmental engineering. Chemistry or equivalent knowledge and experience are welcome.
• Those with experience in water treatment & field service in chemical industry, will be an added advantage.
• Able to work well and excel in a team. Demonstrates leadership qualities.
• Strong communication skills (both written and verbal)
• Possess valid class 3 driving license.

Job Description:

• Develop and maintain iOS applications.
• Collaborate with designers and backend developers to implement features.
• Write clean, maintainable, and efficient code following iOS best practices.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for performance and reliability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in iOS development.
• Proficiency in Swift and/or Objective-C for iOS development.
• Familiarity with iOS SDK, UIKit, and design patterns.
• Knowledge of RESTful APIs and third-party libraries.
• Strong problem-solving skills and attention to detail.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Job Summary:
We are seeking a motivated and detail-oriented Fab Reliability Engineer to join our dynamic team. The ideal candidate will play a crucial role in ensuring the reliability and performance of our manufacturing processes. This position involves process qualification, conformance, process change management, new process development, and wafer-level reliability testing to enhance our production capabilities.

Key Responsibilities:

• Process Qualification: Conduct thorough evaluations and validations of manufacturing processes to ensure they meet reliability standards and specifications.
• Conformance: Monitor and analyze process performance to ensure compliance with established quality and reliability metrics.
• Process Change Management: Lead and manage process changes, ensuring that all modifications are documented, validated, and communicated effectively to relevant stakeholders.
• New Process Development: Collaborate with development teams to design and implement new manufacturing processes.
• Wafer-Level Reliability Testing: Design and execute wafer-level reliability tests to assess the performance and durability of semiconductor devices under various conditions.
• Data Analysis: Utilize statistical tools and methodologies to analyze process data, identify trends, and recommend improvements.
• Collaboration: Work closely with engineering, production, and quality assurance teams to drive continuous improvement initiatives.
  
  Qualifications:
• Education: Bachelor’s degree in Electrical Engineering, Physics, or a related field. Advanced degrees are a plus.
  Experience: Previous experience in a semiconductor manufacturing environment or related field is preferred.
  
  Skills:
• Strong analytical and problem-solving skills.
• Proficiency in statistical analysis and data interpretation.
• Familiarity with process qualification, reliability engineering principles, and wafer-level reliability testing.
• Excellent communication and teamwork abilities.
• Knowledge of industry standards and best practices in manufacturi年

Overview

We are seeking bright and friendly individuals with excellent communication skills, willingness to learn and apply new technology and a track record for providing great customer service. You will have opportunities to work in a variety of challenging IT environments to quickly build up your IT and communication skills.

What will you be doing?

As a Senior Service Engineer, you provide Level 1 and Level 2 Support to existing clients, serve as a primary contact to identify, troubleshoot and to provide resolutions to the reported issues. Your job is to work closely with R&D Team by conducting preliminary investigations i.e., replicating the reported issues raised and communicate to the support software engineers and Quality assurance engineers of your findings to facilitate in bug fixing.

Your responsibilities will include:

• Being a representative for project-specific customer inquiries and issues that you will take ownership and bring resolution.
• Ensure customer satisfaction in Project Support and Maintenance
• Collect information and perform deep-dive analysis, diagnosis, and troubleshoot.
• Commit to SLA for response and resolution, troubleshoot and perform root cause analysis of technical issues
• Communicate efficiently with the customer and the Internal R&D team on the bug fixes needed.
• Manages the status of issues raised and ensure they are resolved effectively in a timely manner.
• Continually evaluate existing processes to streamline and enhance customer support activities.
• Manage and keep tracks of change requests, bug fixes status and system updates deployments documentations.
• Prepare weekly statistic reports and able to present professionally in the weekly progress meetings with clients.
• Prepare and keep track of user manuals documentation and versions as well as release notes for upcoming enhancement releases.
• Conduct training / hand-holding sessions with users and to guide them to troubleshoot the system to resolve software issues or problems.

OK, I’m interested… is this the job for me?

We look for people who value agility, passion and teamwork; those who can bring fresh ideas to the table and want the opportunity to learn, grow, and expand their careers. Bring your aptitude and build upon what you do best for our customers, partners, team, and you.

Other qualities that you’ll need to be a fit for this role include:

• Degree in Information Technology/Computer Science/ Computer Engineering
• Preferably > 1 year experience in IT Industry managing large-scale applications support
• Pro-active, customer-focused, and comfortable dealing with clients/vendors directly.
• Excellent communication skills and the ability to interact professionally with a diverse group, executives, managers, and subject matter experts.
• Highly energetic, motivated team player, able to work under tight timelines and pressure to participate in digital transformation journey
• Good interpersonal skills, resourceful, take ownership
• Organized, meticulous, and able to work independently
• Strong analytical and troubleshooting skills
• Delivered B2B services effectively and efficiently, aware of service management preferred.
• Preference given to vendor–based software delivery experiences.
• Experience in Software Development and Microsoft SQL Server will be an advantage

Roles

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. To be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion.

Responsibilities

• Assist with on-site management to ensure project success
• Ensure project plan is moving forward to meet anticipated deadlines
• Responsible for RFI and submittal process
• Processes owner billings and project related accounting issues

Qualifications

• Bachelor’s degree in mechanical or industrial engineering or equivalent experience
• 1 - 3 years' of experience as a project coordinator, project engineer, or project manager
• Strong experience in AutoCad and Microsoft Office Suite
• Familiarity with rules, regulations, best practices and performance standards
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Job Responsiblities :

• Responsible for environmental protection, safety and health, radiation protection and other new government announcements or revised laws and regulations.
• Responsible for the planning, reviewing and implementation of occupational safety and health management plan.
• Assist in the investigation of occupational accidents, and be responsible for external notification and declaration.
• Responsible for various environmental safety and health related Management Systems audits and inspections and tracking the gaps and recommendation for improvements.
• Responsible for the planning, reviewing and implementation of GHS, chemical classification management.
• Responsible for the audit of contractors, suppliers and licensed waste disposal companies.
• Responsible for the company's various environmental safety and health related education and training planning and implementation.
• Responsible for ISO 14001, ISO 45001, SS 651 and other management systems operation, maintenance and internal audit, and complete the external audit planning and execution.
• Responsible for the IH and Medical Monitoring program.
• Organize all Fire Drills and CERT related activities.
• Perform ISEP related project plan assigned by the management.

Job Requirements:

• A Degree qualification in a relevant discipline
• Min 2 years of relevant working experience in Semiconductor Environment,.
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes. Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses.

Accountabilities:

• Understand the customer’s network structure and become familiar with the Customer’s network implementation and support processes and procedures to ensure supporting a network with proper SLAs.
• Carry out migrations of existing setup, features, and configuration as required by the customer in a production/testing environment and help improve plans to implement new features to increase the network stability or user requirements.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Raise equipment Return Material Authorizations (RMA’s) and to track till problem resolution and produce incident report for any severity issues that was reported by customers or end users.
• Be available for customers’ questions in assisting their needs to support network related issues and monitor customer network leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.
• Perform the wireless testing across customer’s different locations and identifying or fixing if there are any performance issues or slowness in network for wireless users.
• Identify the principal vendor best practices and only perform changes with customer approval to improve the security levels.
• Co-ordinate between his/her own Global Network Centre for any escalations or major issues and bridge between customer / senior resources / vendor / etc

The Individual and their Experience:

• Minimum 2-3 years of relevant experiences in network operations including wireless technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA certified plus any other networking certifications preferred
• Basic understanding about Routing / switching protocols.
• In-depth knowledge on Stacking / L2 technologies / STP / IP Addressing.
• Proficient at performing local / remote IOS upgrades on different products and RMAs for faulty devices in production
• Good understanding about different monitoring tools like Cisco PI / PRTG / Spectrum / Syslog / etc and TCP/IP structure and IP scheme
• Strong knowledge on Wireless / ARP / MAC / L2 loops / Switching.
• Understand DNS / DHCP / Security knowledge is an added advantage.
• Eagerness and willingness to pick up & adapt new technologies and automation.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Description:

• Develop and maintain responsive web applications and user interfaces.
• Collaborate with backend developers to integrate APIs and services.
• Write clean, maintainable, and efficient code using modern frameworks and libraries.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for maximum speed and scalability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in frontend development.
• Proficiency in HTML, CSS, and JavaScript.
• Familiarity with frameworks such as React, Angular, or Vue.js.
• Knowledge of responsive design principles and cross-browser compatibility.
• Strong problem-solving skills and attention to detail.

Developer/Senior Developer (Full Stack)

Shaping Singapore’s digital future, we at the Infocomm Media Development Authority (IMDA) often tackle head-on challenges that come with developing and deploying emerging, frontier technologies across various sectors. We Dream, Design and Deliver in the technology and media space, leading Singapore into a limitless digital future.

Join us in playing an exciting role in building Singapore’s digital metropolis.

If you have what it takes to build Singapore’s digital future with us, we are looking for a Full Stack Developer for the role in SGTraDex Technologies Pte Ltd, wholly owned subsidiary of IMDA.

What the role is:

SGTraDex Technologies Pte Ltd is a company incorporated to design, own and operate SGTraDex, a trusted and secured data exchange highway.

You will be part of the Engineering Team and will be working on enterprise level applications to build web applications that facilitates data exchanges across multiple systems.

What you will be working on:

• Drive the development team in building reusable and extensible services

• Advocate and practice agile principles in software development

• Design and build services with a focus on business value and usability

• Design systems with scalability and flexibility in mind

• Embrace and ensure “lean operations” for all system

• Contribute in technical discussion or solutioning session

• Perform code reviews and encourage best practices

• Maintain user guides and technical documentations

What we are looking for

• Experience with Cloud hosting or PaaS such as AWS, Azure, Google Cloud, Heroku, Firebase, etc

• Write high quality and maintainable code on open-source (Linux based) web platforms and frameworks (Example: NodeJS, Angular, ReactJS, Go, etc.)

• Experience with both frontend and backend development from development to operation

• Experience with micro-service architecture

• Experience with at least 1 SQL and NoSQL database

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• Excellent written and communication and skills

• Work in a cross-functional service team consisting of software engineers, DevOps, and other specialists

For senior developers:

• Own end-to-end design and implementation for complex systems

• Provide technical leadership within the team

• Mentor junior engineers

• Review and approve code

• Take ownership of the project documentation

• Perform the Scrum master role (scrum master certification is a plus)

This position will commensurate with experience

Only shortlisted applicants will be notified