Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

About the Company

Our Client is an information technology service provider offering consulting, systems integration, maintenance and managed services to enterprise customers

Responsibilities

We are looking for a Network Engineer to design, deploy and maintain network infrastructure and solutions for clients in various industries.

• Design and implement secure networking solutions;
• Install, configure, and manage network devices;
• Troubleshoot escalated network issues and work towards effective resolution;
• Maintain detailed technical documentation for all network-related configurations and procedures;
• Monitor and enhance network performance, ensuring high levels of availability and stability;
• Drive improvements in scalability, capacity, security, and overall system efficiency;
• Support project deployment, ensuring successful implementation of network solutions.

Requirements

• Tertiary education in information technology or any relevant discipline;
• Certification in networking technologies would be an advantage;
• At least 3 years of experience in network infrastructure, ideally within a systems integration environment;
• Strong knowledge of wired and wireless network deployment and related technologies;
• Familiarity with routing and switching protocols and practices;
• Excellent organizational skills and the ability to prioritize tasks effectively.

Employment Details

• This is a 1-year renewable contract, convertible to permanent.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

JOB DESCRIPTION

Commissioning and Trouble-shooting to the all kind of air- con system,(A.C.C.U, A.H.U, F.C.U, SPLI type , WINDOW type , PACKAGE type , AND CHILLER type) check the Electrical wiring diagram to the system.

Overhauling all kind of Compressor to the refrigeration system(Carrier (5f/5h series), Daikin(c55/c58/c74/c75 series),Sabroe(cmo 20, 30 /smc 100/bf series), Bock(f-series), York( ms/mrseries), Carlyle (06ea/06ed series), Bitzer.

Mitsubishi (MS/O6B Series) open type and semi-hermetic type).

Split type air condition installation and troubleshooting.

Package type air condition installation and trouble shooting.

Re-fabricate and modify the piping to the Condenser by brazing method.

Re-fabricate and modify the piping to the Evaporator coil & steam coil by brazing.

Retro-fittings to the refrigeration system as per Environmental free zone Freon gas.

Service report maintains, & Attendant customer feed-back.

JOB REQUIRMENT

Minimum Degree or diploma in Relevant Engineering.

Minimum 10 years of experience on the relevant field.

Must have good communication knowledge.

Must have pervious Singapore experience.

Must able to work in any shift or any timing slot.

As a DevOps Specialist, you will be required to:

• ​Work directly with clients Development team, product owner and various key stakeholders.
• Develop scripts and templates to automate infrastructure provisioning. ​
• Take ownership of end-to-end solutions provided by teams across the organisation. ​
• Provide system troubleshooting and problem solving across platform and application domains, expect to participate in on-call escalations to troubleshoot customer facing issues. ​
• Security and access control design IAM roles and utilize cloud native controls to meet security objectives and every infrastructure level and cloud services used. ​
• Capacity management and planning devise mechanisms to monitor and capture system. metrics and identifying potential bottlenecks at the infrastructure level. ​
• Assist in the migration activities for clients platform.

Qualifications:

• ​Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines. ​
• Passion for automation, standardization and best practices. ​
• Solid hands-on experience in designing, building, deploying and securing of highly available web application in cloud platform such as AWS, Azure or Google Cloud. ​
• Experience with Terraform, Atlassian JIRA, Confluence, Bitbucket and Bamboo. ​Experience in software-defined infrastructure (OpenStack, CloudStack, VSphere). ​
• Experience with infrastructure provision tools (Docker, Ansible, Puppet, Chef etc.). ​
• Network skills in firewall rules, load balancers, firewalls, VPNs, DNS. ​
• Basic understanding of DevOps principles and practices.
• Knowledge in DecSecOps will be an added advantage. ​
• Self-motivated and good communication skills. ​
• Experience in Agile development environment focusing on rapid quality delivery. ​
• High attention to detail, accuracy, meticulous to figures and processes in high agility environment.

Preference:

• ​Experienced with management cloud infrastructure and services / certification with GPC, GCC (i.e. AWS, Azure, Google Cloud) or equivalent cloud platforms will be preferred. ​
• Experience in one or more virtualization technologies (KVM, Xen, VMware, Hyper-V). ​
• Good understanding of the Linux operating system. ​
• Good understanding of Infra-as-code and Policy-as-code.

Role Overview

• Reports To: Project Manager
• Objective: Collaborate with Application and Infrastructure Teams to set up and configure infrastructure and applications in the OpenShift Container Platform (OCP).

Responsibilities

• Coordinate infrastructure setup and support application infrastructure requirements.
• Work with the application team to set up, migrate, and test applications from VMs to OCP.

Qualifications

• Proficiency in Red Hat OpenShift (OCP) Development & Architecture.
• Knowledge of Linux OS & MariaDB.
• Experience in Java Development, Shell Scripting, and DevOps.
• A minimum of 5 years of professional experience, with 3 years in a relevant field.
• Ability to work shifts, including weekends.

Strong interpersonal skills and the ability to work independently

Must meet the following criteria:

1)Degree and qualifications in related field.

2)Must be able to speak and understand English so as to communicate with the team members.

3)Must be able to lead a groups of worker.

4)Must be a good leadership.

5)Must be able to coordinate workers and projects.

6)Must be able to work under tight deadlines.

Purpose: Provide the fabrication steps & process time to calculate the cost of the part. This includes assessing whether the design provided is machinable, the availability of machines or tools to support the requirements and proposing cost-efficient methods.

Key Areas of Responsibility:

• Provide machining process steps for quote submission to determine process cost calculation.
• Review the part drawings & specifications provided and consider the critical dimensions or process.
• Identify machining issues and provide Design for Manufacturing (DFM) slides to highlight issues; present an alternative proposal when possible.
• Generate a drawing/list of the requirements before sending the Request for Quote (RFQ) to suppliers.
• Inform suppliers of requirements & stipulate a cost breakdown list. Ensure that suppliers meet the specified timeline.
• Provide Part Cost estimation for Outsource Build to Print (BTP) parts for the Commodity team to use as a price reference.
• Mentor new hires on operations and part calculation processes to ensure they receive the information and guidance needed to perform their jobs effectively.
• Support and participate in company continuous improvement program.

Qualifications & Experiences:

• Nitec/Dilpoma/Degree in Mechanical Engineering or relevant field.
• Minimum 1 year of working experience in the Semiconductor or High precision equipment industry, with relevance to costing will be an advantage.
• Knowledge of Solidworks or other computer-aid design software.
• Application of measuring equipment and techniques
• Knowledge of geometric dimensioning and tolerancing

This is a permanent role for a regional company working in the infrastructure construction company. The incumbent must be willing to work on Jurong Island.

Must be hands-on Primavera P6

• Degree or equivalent in Civil/Mechanical engineering

• Minimum 4 years in Oil & gas, Process/chemical plant EPC projects experience

Key Responsibilities:

• Schedule periodic Service and Maintenance (S&M) and ensure service reports for periodic S&M are properly documented and stored.
• Identify and troubleshoot any operational problems with any equipment.
• Prepare quotations, organise and carry out necessary repair work.
• Ensure contractual obligations are always met.
• Ensure chiller plant always maintains 'n+1' contingency.
• Monitor chiller plant performance (kW/RT) and work with the Performance unit to optimise and maintain chiller plant performance.
• Prepare and submit Service Reports for insurance claims.
• Schedule technicians' duty roster, and review and approve technicians' timesheets, leave, claims, etc.
• Be the main point of contact with Customers - provide technical/operational support to Customers when needed, attend to Customers' complaints, and prepare and submit incident reports to Customers.

To succeed in this role, you must have:

• Diploma in Engineering/Mechanical/Electrical, or related disciplines.
• Minimum of 5 years of relevant experience working with ACMV systems, preferably in a similar role.
• Well-versed in air-conditioning and chiller plant operation fundamentals.
• Possess good communication skills, able to manage stakeholders and work well in a team.
• Responsible and self-motivated.

Key Responsibilities include:

· Knowledge and hands on experience in implementing virtualization network

· Working experience for industrial Cyber Security would be a plus

· Configure, maintain and troubleshoot Honeywell Experion hardware and Software

· Implement and Admin EPKS & TPS Domains, controllers (HPM, C200/C300), switches etc.

· Support Honeywell FTE, and Microsoft Technologies

· Support client server architecture

· Perform preventative and corrective maintenance of system hardware/software/networks

· Assist clients with third party vendor communication to our systems

· Administer preventive maintenance on controls systems

· Provide technical support to customers and serve as customer contact for service related issues

· Be able to respond to emergency calls as part of a 24/7 roster service and resolve them within the guidelines that meet or exceed our contract customer expectations and requirements

· Program code logic including system configuration / implementation and troubleshoot existing code. Support Factory Acceptance Testing, Site Acceptance Testing and startup activities including equipment checkout.

· Perform audits and baselines of installed systems to help with migrations and trouble shooting

· Team Player, comfortable with being the lead support person on site.

· The ability to accurately document work performed.

· Knowledge of other systems such as TDC / TPS, PHD, DOC4000, FSC, DVM or others a bonus

· Support / lead projects from preliminary engineering, detail design, startup. Have capability to lead others to accomplish all project goals and objectives.

· Knowledge and experience with process instrumentation would be beneficial

· Must be able to take ownership and responsibility for work and actions

Basic Qualifications:

· Bachelor’s degree in with Chemical Engineering / Automation Control

· Minimum of 5 years’ field experience

· Preferable with working experience in Experion (TPS, PHD, FSC an advantage)

· Be comfortable leading system migrations between releases.

· Work independently on life system

· Certificate on Virtualization would be a plus

· Demonstrated effective oral and written communication and interpersonal skills.

JOB SCOPE:

• Generate leads and identify sales opportunities
• Present product demos and technical solutions to customers
• Prepare proposals, quotes, and pricing
• Collaborate with engineering teams to design tailored solutions
• Assist with product installation and integration
• Provide post-sales support and customer training
• Manage sales pipeline and track progress
• Build and maintain customer relationships
• Negotiate pricing and close deals
• Stay current with product knowledge and industry trends

REQUIREMENTS:

• At least 3 years of experience in manufacturing automation machines
• Knowledge of CAD software and Microsoft Office
• Diploma (or higher) in any discipline; related experience may apply
• Self-motivated, goal-oriented, creative, and able to multitask
• Strong interpersonal communication skills (English and Mandarin)
• Able to collaborate effectively with others
• Frequent travel may be required
• Class 3 driving license preferred
• Willingness to adapt and be flexible
• Preferably own vehicle (car allowance provided)

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Field Service Engineer

5 Days (Mon-Fri)
830am-5pm
$2,800-$3,800 + $120 Transport Allowance
Gambas Crescent

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

• MNC Company
• Basic $3500 - $4000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Perform regular maintenance and carry out diagnostic analysis for trouble shooting and repair work
• Handling of measurement and detection equipment for military and homeland security
• Handle sales product enquiries
• Manage post-sales delivery of equipment
• Prepare basic reports
• Any other tasks assigned by superior

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 2-3 years of relevant experience
• Possess IT software installation and configuration skills will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Scope:

• Install, maintain, and repair equipment and systems at customer sites
• Conduct regular inspections and preventive maintenance on equipment
• Troubleshoot and diagnose technical issues in the field
• Provide training and support to customers on equipment usage
• Prepare and maintain service reports and documentation
• Collaborate with internal teams to resolve customer issues
• Ensure compliance with safety and quality standards
• Manage inventory of spare parts and tools for on-site work
• Communicate effectively with clients to understand their needs and provide solutions

Requirements:

• Nitec/Higher Nitec in Mechatronics/Mechanical Engineering or Diploma in Mechanical/Electrical Engineering
• At least 2 years of hands-on experience in equipment servicing and repair
• More experienced candidates may qualify for higher positions
• Good command of written and spoken English
• Ability to write simple reports in English
• Responsible, hardworking, and able to work independently
• Positive work attitude and eagerness to learn new skills
• Capable of working under tight schedules
• Willingness to work after office hours as needed
• Availability for business trips on short notice

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Philips is a global leader in health technology, committed to improving billions of lives worldwide and striving to make the world healthier and more sustainable through innovation. Driven by the vision of a better tomorrow.

But it’s not just what we do, it’s who we are. We are 80,000, wonderfully unique individuals, with two things in common. An unwavering sense of purpose and a relentless determination to deliver on our customers’ needs. It’s what inspires us to create meaningful solutions – the kind that make a real difference – when it matters most.

The world and our customers’ needs are changing faster than ever before and while we are proud of what we do already, we know we can do more. That’s why we need you, to help us tackle increasingly complex challenges posed by ever evolving health and well-being needs.

In this role, you have the opportunity to make life better

Looking at the challenges the world is facing today Philips’ purpose has never been more relevant. So whatever your role, if you share our passion for helping others, you’ll be working towards creating a better and fairer future for all.

You are responsible for

MR portfolio

• Perform corrective maintenance, supported when necessary by tier-2 support helpdesk
• Demonstrate commitments to meet customer needs and requirements by ensuring all given quality standards
• Submit timely and accurate service data, job sheets, reports, expense claims, radiation film badges, field problem reports and other paperwork as assigned
• Be aware of customer needs and potential commercial leads (Philips Lifecycle Solutions – PLS) through customer visits and provide feedback and recommendations to the management, relevant people within the organization
• Support the District Customer Services & Operations Manager and the Customer Services Account Manager as appropriate with contract renewals etc.
• Use company property with care to ensure optimal results with minimal operational costs
• Keep abreast of new technologies likely to affect PH range of products
• Be a professional representative for PH with respect to customer problems, ensuring personal acceptability by the customer in appearance and behavior in accordance with PH policy and targets
• Accuracy of service records with particular attention to test & inspection results
• Adopting appropriate ESD control while servicing PH equipment
• Usage of appropriate electronic measurement equipment in calibration controlled cycle
• Responsible for reporting identified device safety issues according to applicable PH quality standard policy
• Responsible for reporting customer feedback according to applicable quality standard policy and follow up relevant assigned quality & regulatory training in a timely manner

To succeed in this role, you’ll need a customer-first attitude and the following

• Diploma/Degree in Biomedical or Electronics Engineering or equivalent
• At least 3 years of working experience in service or engineering roles, preferably in the medical device industry
• Good troubleshooting skills
• Good communication and interpersonal skills

About Philips
We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others.
• Learn more about our business.
• Discover our rich and exciting history.
• Learn more about our purpose.

If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here.

RESPONSIBILITIES

• Provide comprehensive range of technical after-sales service support, installation, commissioning and repair plus preventive maintenance plans for laboratory/ hospital infrastructures or research/ analytical equipment in the medical imaging industry;
• Provide technical consultation to customers with a focus on the refrigeration system;
• Respond to customers’ requests by troubleshooting problems and taking corrective actions within targeted timeline;
• Prepare service reports.

REQUIREMENTS

• ITE/Higher NITEC/Diploma/Degree in Electronics, Electrical, Mechanical Engineering or equivalent
• Minimum 3 years of relevant technical work experience in service/ maintenance;
• Ideally process experience in similar industry (scientific/biopharmaceutical);
• Understanding of refrigeration system as focus;
• Excellent communication and interpersonal skills;
• Able to work independently and a team player;
• Self-motivated, results-oriented individual with good business acumen;
• Valid Class 3 driving license and personal vehicle will be an added advantage

BENEFITS

• Attractive remuneration package
• Career development opportunities
• Excellent technical exposure in the scientific/biopharmaceutical industry
• Fixed Monthly Transport Allowance

• 5 Days (Mon-Fri)
• 830am-5pm
• $2,800-$3,800 + $120 Transport Allowance
• Near Sembawang

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

As an Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• > 2 years of experience in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals in the semiconductor industry
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations

Keen on the role? Apply now!

We are seeking a talented and motivated Software Engineer to join our dynamic team. In this role, you will contribute to the development and enhancement of cutting-edge software solutions tailored for high-tech products in the semiconductor manufacturing industry. Collaborating closely with the Software Manager and an Agile Scrum team, you will be instrumental in designing, implementing, and optimizing robust software applications that integrate seamlessly with advanced hardware systems.

Key Responsibilities:

• Design, develop, and enhance software architecture for scalable, high-performance applications.

• Integrate hardware control systems and sensor data acquisition modules into the software platform.

• Work closely with team members in a Scrum environment, reporting progress to the Software Manager.

• Write, debug, and maintain high-quality source code, and conduct comprehensive unit testing to ensure software robustness.

• Present developed features to stakeholders, including team members and product managers, and incorporate feedback for continuous improvement.

• Provide technical support and on-site debugging to resolve issues as needed.

Requirements:

• Bachelor’s, Master’s, or Ph.D. in Computer Science, Computer Engineering, Electronics, Automation, or a related technical field from a recognized institution.
• At least 5 years of hands-on programming experience in C#, .Net/WPF, and C++ on the Windows platform.
• Proven expertise in object-oriented design patterns for scalable, high-performance software applications.
• Significant experience in integrating commercial system software with hardware in production environments.
• Proficiency in multithreading technologies.
• Experience with digital data acquisition and data processing using high-speed digitizer cards, frame grabbers, or similar technologies.
• Familiarity with capital equipment especially defect inspection and metrology machines.
• Experience in factory automation and MES development is highly advantageous.
• Prior experience working in Scrum Agile development teams is preferred.

If you are passionate about developing innovative software solutions, thrive in a collaborative environment, and aspire to make an impact in the semiconductor manufacturing industry, we invite you to be part of our team. Take this opportunity to shape the future of high-tech solutions with us!

Job Description

• Develops and manages new designs in accordance with project requirements and objectives, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Proficiency in CAD software for 3D modeling and technical drawings, SolidWorks knowledge will be preferred.
• Strong understanding of materials and manufacturing processes. Knowledge in machining, metal forming, heat treatment and casting are preferred.
• Knowledgeable in design principles, such as springs, bearings and hydraulics, and in theoretical calculations related to the field of statics, dynamics and kinematics.
• Keen interest and experience in a hands on approach towards the construction of prototypes and testing.

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Title: Software Engineer / Senior Software Engineer (Machine Vision)

Job Description:

We are seeking a talented and motivated Software Engineer to join our dynamic team. In this role, you will contribute to the development and enhancement of cutting-edge software solutions tailored for high-tech products in the semiconductor manufacturing industry. Collaborating closely with the Software Manager and an Agile Scrum team, you will be instrumental in designing, implementing, and optimizing robust software applications that integrate seamlessly with advanced hardware systems.

Key Responsibilities:

• Research and develop cutting-edge algorithms for image processing, machine learning, and deep learning.

• Implement, integrate, and optimize these algorithms in mission-critical software to leverage high-performance hardware.

• Work closely with team members in a Scrum environment, reporting progress to the Software Manager.

• Write, debug, and maintain high-quality source code, and conduct comprehensive unit testing to ensure software robustness.

• Present developed features to stakeholders, including team members and product managers, and incorporate feedback for continuous improvement.

• Provide technical support and on-site debugging to resolve issues as needed.

Requirements:

• Bachelor’s, Master’s, or Ph.D. in Computer Science, Mathematics, Digital Signal Processing, or a related field from a reputable institution.
• At east 5 years of experience developing, implementing, and integrating algorithms in image processing and deep learning.
• Skilled in programming in C# or C++ (minimum 5 years in at least one language) and Python.
• Familiarity with prevailing AI development environments, model training tools, open-source neural networks, and inference technologies.
• Solid understanding of machine vision technologies.
• Familiarity with capital equipment especially defect inspection and metrology machines.
• Expertise in GPU acceleration programming (CUDA) is highly valued.
• Familiarity with working in Scrum Agile development teams is preferred.

If you are passionate about developing innovative software solutions, thrive in a collaborative environment, and aspire to make an impact in the semiconductor manufacturing industry, we invite you to be part of our team. Take this opportunity to shape the future of high-tech solutions with us!

• Well Established Company
• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• DCS | PLC | SCADA | Harmonas Programming
• Training Provided

Job Responsibilities:

• Plan, design, and configure control systems for a variety of applications, ensuring seamless integration with Building Automation Systems (BAS), Distributed Control Systems (DCS), SCADA, and Programmable Logic Controllers (PLC)
• Create detailed control schematics and field termination drawings, ensuring accurate design documentation for system installation
• Set up and configure system databases, prepare control descriptions for Testing and Commissioning (T&C), ensuring all configurations are optimized for performance.
• Lead Factory Acceptance Testing to verify system functionality, compliance with project requirements, and quality standards.
• Provide hands-on support during installation, commissioning, and start-up phases. Troubleshoot, repair, and calibrate systems on-site to ensure optimal performance.
• Conduct in-depth troubleshooting and fault diagnosis across systems such as DCS, PLC, BAS, and SCADA to resolve issues and maintain smooth operation.
• Perform system testing, calibration, and fine-tuning to ensure systems operate at peak performance and meet specified requirements.
• Work closely with project managers, designers, and engineers to ensure projects are executed smoothly and on time. Communicate technical requirements and solutions effectively to clients and stakeholders.

Qualifications & Experience:

• Bachelor’s Degree in Electrical Engineering, Control Systems, Automation, or a related field.
• Proven experience in system configuration, design, and commissioning of DCS, PLC, BAS, and SCADA systems.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Welding Engineer Summary

Welding Engineer is responsible for developing safe and efficient welding processes and procedures for a variety of materials and products. The Welding Engineer must have an in-depth knowledge of welding principles, materials selection, and welding technologies. They must be able to create and implement innovative welding designs, operations, and processes. The Welding Engineer must be able to troubleshoot and solve welding-related problems. They must also be able to provide technical guidance to other engineers, welders, and technicians.

Job Description:

• Prepare WPS/PQR
• Calculate the hours required for the work process
• Design, fabricate and assemble welding components and products
• Analyze blueprints and other technical documents to plan projects
• Select the appropriate welding techniques and methods for the job
• Conduct tests and inspections on welded components
• Collaborate with other engineers and technicians on project design and development
• Maintain and repair welding equipment
• Monitor and document project progress and provide regular updates
• Ensure that projects meet safety and quality requirements

Skills:

• Planning and managing welding projects
• Developing welding processes and procedures
• Monitoring welding quality and preparing welding reports
• Selecting, assembling, and setting up welding equipment
• Using heat analysis and metallurgical knowledge to determine the correct welding process for each application
• Troubleshooting welding problems and determining corrective actions
• Performing welding tests and inspections
• Conducting welding research

Requirements

• Nitec/ Bachelor's degree in welding engineering or related field
• Experience with welding processes
• Strong Knowledge of engineering welding principles and practices
• Ability to read and interpret blueprints and schematics
• Knowledge of safety procedures
• Ability to work independently and as part of a team
• Excellent problem-solving skills

Responsibilities:

• Assist the Project Manager in monitoring and managing the day-to-day operations of projects
• Liaise with consultants, sub-contractors and supervisors on project matters
• Attend meetings with clients/main contractors/sub-contranctors on project-related matters
• Update site progress information and ensure the accuracy of shop drawings
• Carry out inspection and joint inspection of works in progress
• Ensure that the works are executed to the required quality standard
• Adhere to safety guidelines and practices in the work place
• Assist the Project Managers and project team with other tasks

Requirements:

• Minimum 2 years of experience working as a Project Engineer or BIM Modeller/Coordinator
• Good understanding of M&E works and ability to associate BIM with construction needs
• Willingness to learn and use new software/technology
• Self-driven and good time management
• While not necessary, knowledge of AutoCAD, Revit MEP, Navisworks and BIM360 would be an advantage.