This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Responsbilities:

• Provide highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems
• Perform continual improvement programmes, parts overhaul, preventive maintenance, modifications and repair works on equipment
• Serve as company liaison with customers on administrative and technical matters for assigned projects
• Coordinate logistics arrangements with customers on equipment related matters.
• Responding to customers' complaints provides time to solutions to resolve customers' issues
• Monitor the performance of the product, provide regular update reports and feedback on customer's service requests
• Report common complaints of customers to management in order to address the situation for future reference.

Requirements:

• Degree/Diploma in Electrical/Electronic/Mechanical/Mechatronics Engineering or its equivalent
• Some relevant experience with semiconductor equipment knowledge
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment
• Required to work or on standby after office hours/weekend/public holiday.

EA Personnel Name: Jackie Ng
EA Personnel No: R22109024
EA License No: 95C5411

Job Description

• Industry/ Organization Type: High Speed Networking Service Provider
• Position Title: Field Service Technician/ Engineer
• Working Location: Ubi (Nearest MRT: Tai Seng) – Company transportation provided to travel to client location
• Working Hours: Monday to Friday, 9.00 am – 6.00 pm
• Salary Package: Up to $3000 + OT (Dependent on project) + Performance Bonus
• Duration: Permanent

Key Responsibilities

Field Service Engineer

• Work as part of a team to install, test, and commission company equipment, ensuring all systems are fully operational and meet client expectations.
• Assist with the setup and configuration of network-based systems, ensuring connectivity and functionality.
• Set up and configure security surveillance systems and access control systems, ensuring proper functionality and client satisfaction.
• Install and maintain radio communication equipment, ensuring uninterrupted communication services.
• Regularly service and maintain installed equipment to ensure optimal performance, including troubleshooting and repairs when necessary.
• Assist in project planning, coordination, and execution, ensuring timely completion of assignments.
• Participate in on-the-job training under senior engineers, developing your technical skills and expanding your field of expertise.

Field Service Technician

• Perform accurate installation and laying of electrical cables to ensure proper connectivity, adhering to industry standards and safety protocols.
• Assist in the testing and commissioning of electrical systems, ensuring that all equipment is safely operational and meets performance standards.
• Conduct routine general maintenance on installed electrical systems and equipment to maintain optimal functionality and reduce downtime.
• Diagnose and fix electrical faults and malfunctions, ensuring that issues are resolved promptly to minimize disruptions.
• Follow all safety regulations and protocols to ensure a safe working environment, including the proper use of personal protective equipment (PPE).
• Work closely with other technicians and engineers to complete tasks efficiently and effectively, ensuring all project goals are met on time.
• Training & Development: Participate in ongoing training programs to stay updated on the latest industry trends, electrical techniques, and safety standards.

APPLY NOW!!!

• Min. NITEC in Electronic or Electrical
• 1 year’s experience working with security surveillance systems, access control, or radio communication equipment preferred
• Training provided for those without experience
• Class 3 driver’s license preferred

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70103 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

JOB SCOPE:

• Generate leads and identify sales opportunities
• Present product demos and technical solutions to customers
• Prepare proposals, quotes, and pricing
• Collaborate with engineering teams to design tailored solutions
• Assist with product installation and integration
• Provide post-sales support and customer training
• Manage sales pipeline and track progress
• Build and maintain customer relationships
• Negotiate pricing and close deals
• Stay current with product knowledge and industry trends

REQUIREMENTS:

• At least 3 years of experience in manufacturing automation machines
• Knowledge of CAD software and Microsoft Office
• Diploma (or higher) in any discipline; related experience may apply
• Self-motivated, goal-oriented, creative, and able to multitask
• Strong interpersonal communication skills (English and Mandarin)
• Able to collaborate effectively with others
• Frequent travel may be required
• Class 3 driving license preferred
• Willingness to adapt and be flexible
• Preferably own vehicle (car allowance provided)

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

• Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international
• Provide high level technical support to external customers at their location
• Provide on-­site training to the customers
• Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales
• Develop Service technical documentation
• Create, develop, and continuously improve the customer support & applications knowledge database
• Timely and professionally handle field service calls and issues arising from the field service
• Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international
• Visits, triage with field applications scientists as appropriate
• Timely complete and submit all required paperwork
• Flexible schedule to accommodate our customer’s needs
• Effectively handle multiple priorities, organize workload, and meet deadlines
• Communicate with the customer to ensure satisfaction and implement any necessary corrective actions
• Up to 30% traveling required within Southeast Asia (at times with short notice)
• Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

• 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)
• 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

• Pre-sales support
• Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

• Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.
• Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation
• Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.
• AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Interested candidates, please apply via Bruker's career portal directly : https://bit.ly/48OlAj5

Shaft Line Solutions (SLS) are looking for an experienced leader to develop the East Asia & Australasia region of our transactional Field Service (FS) business. SLS FS is a global team of service professionals with harmonised ways of working and the tools, processes and systems required to deliver the highest quality of services for our customers. In our team we value, respect, and embrace different opinions and diversity. Safety, environment, and wellbeing are our foundation, we never compromise them.

We are now looking for a Field Service Manager, East Asia & Australasia who can inspire and develop a continuous improvement mindset in a multiple country team. A leader who is both safety-focused and passionate about delivering the highest quality of services to our customers. The position is a permanent opportunity. The location for the position is at Pandan Crescent, Singapore.

Your main responsibilities:

• Lead and manage the operations of the transactional field service business for SLS.

• Ensure efficient operations and implement strategic action plans to meet strategic priorities.

• Ensure the end-to-end SLS field service process is followed in Team 4

• Ensure a high level of customer satisfaction.

• Lead and develop high performing teams while coaching, developing, and supporting talent.

• Foster and develop a generative safety culture within the organisation.

• Drive skill development, capacity planning and utilisation rates of service engineers

• Implement, maintain, and develop processes according to strategy and QHSE guidelines.

• Monitor and report on operational performance in relation to QEHS, Financial, Resourcing, Planning, Administration, Skills & Training, Tools & Investments.

Main requirements in this role:

• BSC in Marine Engineering

• Field Service Engineer background is desirable

• Solid experiences in leading Multi-cultural Field Service Team

• Safety-first mind-set with the ability to inspire others to climb the safety culture ladder.

• Commitment to delivering excellent customer service and a passion for continuous improvement.

• 5 years or more experience working within a Service Delivery function within the Marine Industry.

• Knowledge and understanding of SLS products and services is a must

• Good communication and team building skills.

• Marine engineering background is beneficial.

• Well-developed cultural awareness and situational sensitivity.

• Willing and able to travel.

Position: Pest Control Technician
Location: Various locations, primarily focused on food & beverage establishments
Salary: $2,100 – $3000

About the Role
We are seeking responsible and detail-oriented Pest Control Technicians to join our team. As a Pest Control Technician, you will perform thorough inspections and administer pest management solutions across various sites, ensuring high-quality service for all clients.

Key Responsibilities

• Conduct inspections and apply tailored pest control treatments for each site
• Primarily serve clients in the food & beverage industry, along with residential, commercial, and industrial settings
• Organized scheduling to streamline appointments within the same area on the same day

Job Requirements

• Availability for a 5.5-day work week (office hours), with half-day on Saturdays
• Willingness to work overtime when required, compensated accordingly
• Class 3 license required; no prior experience in pest control necessary

Compensation and Benefits

• Basic salary(Non-Experienced) from $2,100 – $2,300, with total compensation (including OT and allowances) up to $4,000 per month
• Company van provided
• Monthly allowances for cell phone and petrol expenses
• Health insurance and opportunities for career growth

Aventir Group Pte Ltd
EA License: 24C2542

Key Responsibilities:

• Ensures that the assigned infrastructure at the client site is configured, installed, tested and operational.
• Ensures that any software that is part of the solution is installed and configured according to client requirements.
• Proactively identifies problems and errors as they occur and logs such incidents in a timely manner with the required level of detail.
• Liaises with all stakeholders including client IT environments, carriers and colleagues to expediate diagnosis of errors and problems and to identify a resolution.
• Investigates second line support calls assigned and identifies the root cause of incidents and problems following knowledge articles.
• Responds to and diagnoses all alerts, escalate to L3 Field Engineer when unable to resolve within the stipulated time.
• Ensures incidents are updated with progress and resolution details in a timely manner using the required platform.
• Ensures the efficient and comprehensive resolution of incidents and requests.
• Applies tools, techniques and processes to track, log, report on and correct configuration items, components and changes.
• Investigates problems in systems, processes and services and assists with the implementation of agreed remedies and preventative measures.
• Provides second line remote and onsite technical support to clients.
• Provides second line field engineering services to clients.
• Reports and escalates issues to 3rd party vendors if necessary.
• Follows the required handover procedures for shift changes to ensure service continuity.

Knowledge and Attributes:

• Good communicate skills, both verbal and written.
• Ability to plan activities and projects well in advance and take into account possible changing circumstances.
• Ability to maintain a positive outlook at work.
• Ability to work well in a pressurized environment.
• Ability to work hard and put in longer hours when it is necessary.
• Ability to apply active listening techniques such as paraphrasing the message to confirm understanding, probing for further relevant information and refraining from interrupting.
• Ability to adapt to changing circumstances.
• Ability to place client at the forefront of all interactions, understanding their requirements and creating a positive client experience throughout the total client journey.

Academic Qualifications and Certifications:

• Bachelor's degree or equivalent in Information Technology or Computing or related field.
• Professional level certification in different Data Centre technologies such as Cisco, NetApp, EMC- Ex: CCNP (DC), ONTApp etc.
• Professional level certification in different Networking technologies such as Cisco, Juniper, Aruba, F5, CCNP, JNCIP, ACMP etc.
• Collaboration certifications such as - Valid CCNP Collaboration Certification required; Microsoft Voice certification (MS700 & MS720) advantageous; Valid Webex Calling & Webex Contact Centre certification.

Required Experience:

• Moderate level experience in Collaboration technologies such as Call managers, Voice Gateways, Call recording, Scripting, Messaging, VOIP, IP Telephony.
• Moderate level experience in technical support to clients.
• Moderate level experience in diagnosis and troubleshooting.
• Moderate level experience providing remote support in Collaboration technologies.
• Moderate level experience in relevant technology (Cisco and its product stack, SBC's such as AudioCodes and Oracle, CUBE's, Webex calling etc.).
• Basic understanding of Network routing and switching.

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Job description:

• Support Maps data-collection projects and running tasks in compliance with Maps Field Operations processes.
• Manage vendor requests, warehouse inventory, and timely delivery of devices and equipment.
• Communicate and collaborate with internal teams/external partners to manage vendor requests, warehouse inventory, etc.
• Review collection data and facilitate performance reporting.
• Develop documentation and drive process improvements.

Requirements:

• Experience in warehouse management and tooling.
• Possesses operations and inventory management skillsets.
• Ability to follow instructions and protocols.
• Self-driven individual with excellent time and project management skills and sense of urgency.
• Be willing to manage physical hardware/equipment by arranging calibration and maintaining inventory records
• Experience in vendor management.

Job Description & Requirement

• Duration : 1 to 1.5 months
• Working Locations: Metropolis (Main) + Jurong island , Bukom (Bus pickup availability for Jurong island, require to take ferry for Bukom)
• Working Duration: Monday to Friday, office hours
• Salary $2600 & below + OT

Job Description

• Provide basic IT support for internal users
• Responsible for maintenance on all devices
• Provide documentation to ensure all equipment, technical records are updated to reflect the latest changes, proper and correct procedures are followed, configuration and software changes to devices are documented, archived, and backed up for recovery.

Requirements:

• NITEC in Engineering or IT related discipline
• Flexible with roaming to multiple sites
• Candidates with both Engineering & IT experience preferred (Technical Interview) required
• Knowledge in local regulatory requirements from Ministry of Manpower for workplace safety and equipment governance is an advantage.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Able to work in Team environment as well as standalone when need arises.

Duration: 1 to 1.5 months

Working Locations: Metropolis (Main) + Jurong island (Suraya), Bukom (Bus pickup availability for Jurong island/ Bukom)

Working Hours: Mon to Fri, office hours

Salary: Up to $2700

Job Description

• Provide basic IT support for internal users
• Responsible for maintenance of all mechanical and rotating equipment
• Provide documentation to ensure all equipment, technical records and drawings are updated to reflect the latest changes, proper and correct procedures are followed, configuration and software changes to mechanical equipment are documented, archived, and backed up for recovery.

Requirements:

• NITEC in Engineering or IT related discipline
• Flexible with roaming to multiple sites
• Candidates with both Engineering & IT experience (Technical Interview) required
• Knowledge of local regulatory requirements from Ministry of Manpower for workplace safety and equipment governance is an advantage.
• Experience in field work interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Able to work in Team environment as well as standalone when need arises.

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Salary: up to $4200

Working Days & Hours: Mon-Fri Office Hours

Location: One north

Job Description:

* Support start-up, contract maintenance and other service activities with emphasis on safety and protection.

* Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.

* Participate in service and repair of personnel protection equipments, safety activities, emergency response, breakdown calls and ad hoc projects.

* Manage all orders efficiently until fulfilment stage, by working closely with Service team.

* Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.

* Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.

* To provide support to other service activities that may be assigned in the course of work

* Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.

* To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Job Requirements: Min Diploma/Degree in Biomedical / Chemical Engineering or similar w min 2 yrs of relevant experience in oil & gas industry/navy or air-force will be an advantage

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Salary: up to $4200

Working Days & Hours: Mon-Fri Office Hours

Location: One north

Job Description:

* Support start-up, contract maintenance and other service activities with emphasis on safety and protection.

* Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.

* Participate in service and repair of personnel protection equipments, safety activities, emergency response, breakdown calls and ad hoc projects.

* Manage all orders efficiently until fulfilment stage, by working closely with Service team.

* Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.

* Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.

* To provide support to other service activities that may be assigned in the course of work

* Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.

* To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Job Requirements: Min Diploma/Degree in Biomedical / Chemical Engineering or similar w min 2 yrs of relevant experience in oil & gas industry/navy or air-force will be an advantage

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Job Descriptions

• Schedule maintenance activities for chillers systems, keeping track of maintenance works with follow up actions for chillers.
• Ensure all maintenance works are carried out according to prescribed checklist and schedule
• Responsible for testing & commissioning/ fine tuning of new chiller with minimal guidance, such as coordinate project execution at site, witness FAT and conduct SAT to ensure the chiller operating conditions according to target performance.
• Ability to interpret as-built documents, schematic drawings, technical documents as well as analyze operating data from chillers and know how to identify and repair any issues that arise.
• Responsible for on-site management of the chiller overhaul/ repair works and supervise subcontractor work; effectively control the service quality and progress.
• Preparation of service report for each service assignment.
• Assuage dissatisfied customers on service issues such as provide prompt and effective resolution to technical problems on chiller and recommend preventive measures.
• Preparation of risk assessments prior and ensure safety procedures and conduct during service and repairs.
• To ensure all works carried out safely and/or in accordance with safety procedures.
• Any other tasks, when required by Department Manager.

Job Requirements

• Minimum ITE Certificate with Merit in Engineering or Diploma in Mechanical Engineering.
• Minimum 3 years of relevant chiller experiences.
• Preferably Singaporean or SPR
• Able to guide and troubleshoot HVAC faults especially modular screw chillers, centrifugal chillers and absorption chillers.
• Good communication skills both verbal and written as well as preparing service reports.
• Has a good safety mindset and displays good WSH behavior.
• Short term working at overseas maybe required.

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday
• ※ Most of the time they are outside of the office

Responsibilities:
1. Customer Service:

• Ensure a high level of customer satisfaction by delivering excellent support services.
• Act as a point of contact for escalated customer inquiries, maintaining a professional and customer-focused approach.
• Build and maintain excellent relationships with end-users, understanding their technical needs and preferences.
• Gather feedback from users to identify areas for improvement and implement solutions to enhance the overall user experience.
• Conduct user training sessions to promote self-service options and empower users to resolve common issues independently.

2. Technical Support:

• Identification and resolution of hardware and software issues for end-users, both onsite and remote.
• Serve as an escalation point for complex technical problems, ensuring timely and effective solutions.
• Collaborate with other IT teams within the organization (Infra, Network and App) to address and resolve technical issues.
• Oversee the development and maintenance of standardized laptop images for various user profiles.
• Deployment of laptops to new and existing users ensuring consistency, security, and compliance with organizational standards.
• Design and implement efficient processes for onboarding new employees, including laptop setup, account provisioning, and orientation on IT policies.
• Streamline and execute offboarding procedures, ensuring secure data removal, account deactivation, and retrieval of IT assets.
• Ability to analyze issues related to Microsoft 365 applications.
• Having knowledge to troubleshoot Wi-Fi or Network related issues.
• Possess expertise in diagnosing and resolving printer-related issues, including hardware malfunctions, connectivity problems, and print queue management.
• Develop and implement preventive and corrective maintenance strategies to optimize printer performance and minimize disruptions.
• Collaborate with vendors for escalated printer issues, warranty claims, and hardware replacements.

3. Documentation and Reporting:

• Maintain accurate records of support activities, including incident reports, service requests, and resolutions.
• Generate and analyse performance reports to identify trends and areas for improvement.

Qualifications:

• Bachelor’s degree in information technology, Computer Science, or related field (or equivalent work experience).
• Proven experience in a technical support role, with a minimum of 3 years in a leadership or supervisory position.
• Excellent knowledge of desktop operating systems, hardware, and software applications.
• Excellent troubleshooting and problem-solving skills.
• Effective communication and interpersonal skills.
• IT certifications (e.g., CompTIA A+, Microsoft Certified Desktop Support Technician, ITIL V4) are desirable.
• Solid understanding of ITIL framework and best practices for IT service management

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

Responsibilities for Civil Engineer
Follow safety rules, guidelines and standards for all projects.
May plan, assign and supervise the work of others.
Review of reports and plans prepared within the office.
Coordinate and manage any field survey tasks and personnel.
Liaise with clients and agencies, subcontractors, and design teams on projects.
Plan, organize, and carry out pavement evaluations and investigations.
Engage with clients to define and achieve a successful outcome.
Coordinate with local and nationwide teams for project delivery.
Analyze survey reports, maps, and other data to plan projects.
Participate in team meetings, all staff meetings, and other non-billable planning sessions.
Work with the engineering team on the production of design drawings.
Evaluate, select, and apply standard engineering techniques and procedures.
Provide cost estimates and budget projections for technical proposals.
Write and review/approve reports and specifications and make presentations.
Assist with/review scope, budget, and schedule of new project tasks.
Develop and apply advanced engineering solutions to complex problems.
Perform independent research and analysis for significant and complex engineering projects.
Conduct field studies and surveys to collect technical data.
Contribute to company standard detail and specification development and updates.
Prepare design reports and construction plans using local and state standards.
Willingness to travel to construction site locations is expected.

Qualifications for Civil Engineer
Diploma in civil engineering, construction engineering technology, or electrical engineering or equivalent experience.
Experience with AutoCAD and CAD Software.
Prior experience in a consulting position.
A leader and problem solver with a demonstrated collaborative work ethic.
Experience with calculus and statistics.
Demonstrated skill in project design.
Fluency in surveying and site design.
Fluency in sediment control, erosion control, sanitary sewer management, and digging.
Strict attention to detail.
Can produce cost estimates.

• Prepare and give technical presentations to explain to customers how the products and services work.
• Work with the customers and Engineers to ensure the equipment meets the system requirements.
• Communicate with the sales team to understand consumer demands and offer sales support where necessary.
• Secure orders, guarantee product standards and assure product delivery.
• Establish customer rapport and acceptance.
• Plan for modifications to products to meet consumer demands.
• Help clients to solve problems with product usage.
• Recommend new and improved products to the customers and explain how the equipment will be more cost-effective.

Responsibilities:

• Generate new drawings and modify existing drawings according to instructions for construction sequence related to utilities, traffic diversion, shallow/deep excavation works and related works.
• Prepare detailed civil and environmental design documentation and drawings, perform design calculations
• Accuracy and effectiveness in electronic drafting.
• Liaise with Project teams, auhorities, client, architects and various contractors to ensure project work is carried out smoothly Conduct site inspection and coordination on site
• Coordinate filing, storage and retrieval of both manual and electronic drawings.
• Maintain, support and operate associated plotters and printers.
• Ability to work effectively as part of a team or independently with minimal oversight.
• Explain drawing to construction teams and engineers to provide adjustments as required.
• Attend design, clients, architects and site meetings

Requirements:

• Must be familiar with construction sequence drawing and shop drawing with at least 2 years of working experience in the related field is required for this position.
• Diploma ,M&E Engineering or equivalent
• Good familiarity with Autocad programs
• Good communication skills
• Team player with good inter-personal skills
• Able to work under pressure and meet tight deadlines
• Ability to work in dynamic environment and adapt to frequent project related changes
• We regret to inform that only shortlisted candidates will be notified.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.