AIDRIVERS is paving the way to revolutionize mobility with advancing robotics and automotive technology in industrial applications making it; efficient, safer and smarter.

In this role, you will collaborate with our team of world-class engineers and researchers with diverse backgrounds in areas such as robotics, mechatronics and autonomous navigation software stack.

Responsibilities Includes:

• Awareness and knowledge of sensors, communication technologies, or control devices for various automation solutions

• Use of appropriate communication protocol such as Ethernet, CAN Bus and wireless

• Design, develop, or implement control logics or algorithms for electromechanical or pneumatic devices or systems

• Conduct studies to determine the feasibility and performance benefits of new mechatronic systems

• Calibrate sensors, automated systems, control systems, or system components to maximize efficiency of automation

• Consider safety, reliability and accuracy of the system at all times

• PLC programming for embedded logic programming

• Design Unit, Integration and Regression test cases

• Test commissioning and result documentation and reporting using appropriate means

Skill set required:

Essential:

• BSc/ Eng level or higher qualification or above in mechatronics engineering from a respected organisation

• 2+ years’ experience in the field.

• Experience and understanding of CAN, Ethernet and other communications technologies

• Experience of controller programming languages: structural or ladder logic

• Able to understand electrical systems and schematics

• Familiarity / working with sensors and sensor calibration

• Good English spoken and written skills

• Desire to learn and improve all the time

Desirable:

• Experience and working knowledge of automotive systems

• Experience / knowledge of hydraulic and pneumatic systems

• Experience of programming languages C, C++

• Experience IFM PLC

Job Capsule

In accordance with established policies, procedures and standards, is responsible for the activities related to an assigned organizational element, program, project or task. Will normally plan, conduct and supervise engineering design reviews and analysis assignments involving a major project or several smaller or less complex projects. These projects by nature of their complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or scientific field. Project work and assignments may be broad in nature requiring ingenuity and cross functional coordination.

Job Duties/Roles

1. Provides day-to-day leadership of Engineering staff assigned. Assigns projects to Engineers and monitors the progress of all assigned projects. Ensures the delivery of high quality service and maintenance of good customer relations.

2. Devises new approaches to problems encountered and makes recommendations for changes in methods, procedures or design where necessary.

3. Monitors the technical quality, content, consistency, continuity and timeliness of action of all assigned projects.

4. Applies intensive and diversified knowledge of engineering principles and practices in broad areas of technical responsibility. Performs engineering reviews and analyses when necessary. Reviews other engineers' work and provides appropriate guidance and training when necessary.

5. Participates in the development and changes of Rules. Advises assigned staff in matters related to the application of Rules and Regulations.

6. Prepares written response to clients in accordance with established procedures.

7. Maintains liaison with other engineering specialists internally and externally.

8. Monitors the performance, development potential and training needs of engineers assigned. Keeps management informed of manpower needs.

9. Develops or assists in the development of qualification statements, proposals, bids and other presentation materials.

10. Implements and maintains the ABS Health, Safety, Quality & Environmental Management Systems within assigned area of responsibility.

11. Prepares accurate billing to clients.

Knowledge, Skills and Abilities Required (KSAR)

1. Should have advanced practical industry related experience.

2. Knowledge of related technical disciplines.

3. Knowledge of applicable Rules and Regulations and impact of Rule applications and interpretations.

4. Knowledge of company business policies and procedures.

5. The human relations skills necessary to maintain positive client contacts and provide leadership and motivation to subordinate staff and peers.

6. Ability to effectively communicate orally and in writing.

7. Ability to identify, analyze and solve complex or unique engineering problems.

8. Ability to undertake short- and long-term planning to provide for efficient and effective scheduling of work assignments.

9. A working knowledge of the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

SUMMARY
Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Review circuit board designs for testability requirements.
· Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment.
· Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production.
· Generate reports and analysis of test data, prepares documentation and recommendations.
· Review test equipment designs, data and RMA issues with customers regularly.
· Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment.
· Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data.
· Determine conditions under which tests are to be conducted and sequences and phases of test operations.
· Direct and exercise control over operational, functional, and performance phases of tests.
· Perform moderately complex assignments of the engineering test function for standard and/or custom devices.
· Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel.
· Develop or use computer software and hardware to conduct tests on machinery and equipment.
· Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards.
· May provide training in new procedures to production testing staff.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS
Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

REASONING ABILITY
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

Are you curious about the advancement of technology that enable millions of devices to be created on a single silicon chip the size of your finger? Are you pursuing to become a wafer fabrication expert in a fully integrated process chain? Look no further as UMC Process Integration Engineer position is the perfect fit for you.

UMC Singapore is expanding its production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. We are looking for Process Integration Engineer to maintain customer production by ensuring stable wafer quality and on-time wafer delivery through process integration and daily management. This position provides excellent opportunities for growth and development.

Responsibilities

• Introduce customer's new product to FAB and support in new product's tape out procedures to ensure pilot success.
• Improve new Product yield and ensure mass production inline, WAT and CP yield stable
• Define standard operation procedure for daily job
• Co-work with module engineers to solve production related issues. (inline, WAT, yield and reliability...)
• Co-work with module engineers to develop customized process to meet customer special requirement

Qualifications

• Possess at least a bachelor's degree in Electronic Engineering, Electrical Electronic Engineering, Physics, Material Science
• Study in specialized in wafer chip or related semiconductor course
• Possess good communication skills
• Possess good time management skills as well as a strong sense of commitment
• Semiconductor device process engineer background is preferred
• Semiconductor foundry experiences is preferred

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

• Marine Civil Engineering
• Basic $3000 + $6000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Coordinate maintenance activities for facilities and equipment to ensure optimal performance and minimal downtime.
• Ensure machinery and equipment (e.g., gensets, excavators) operate effectively to meet production needs.
• Manage tasks and resources across maintenance and logistics teams to achieve operational targets.
• Enforce safety measures during operations and address challenges to maintain efficiency.
• Lead daily tasks, including reporting and issue resolution.

Requirements:

• Diploma in mechanical engineering or related.
• 1-3 years of experience with excavators, heavy machinery, and equipment.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

• Marine Civil Engineering
• Basic $4000 + $6000
• 5.5 days (8am-5pm/12pm)
• Office: Bukit Batok
• Working location: Project based

Responsibilities:

• Plan construction schedules and coordinate activities to meet project timelines.
• Monitor and report on-site and off-site progress, preparing regular updates for consultants and clients.
• Analyze project specifications and drawings, including civil/structural, architectural, and M&E details.
• Supervise construction activities, ensuring safety compliance and maintaining a clean work environment.
• Organize site inspections, toolbox meetings, and safety briefings with relevant personnel.
• Attend meetings with clients and prepare necessary submissions (e.g., RFIs, MS, RA, SWP, shop drawings).
• Maintain project documentation and ensure compliance with ISO standards.

Requirements:

• Diploma / Bachelor’s degree in Civil Engineering.
• 1-3 years of experience in infrastructural or marine construction.
• Preferred experience in dredging, reclamation, or nearshore construction.
• Knowledge of construction methods, materials, and BCA regulations.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

The Rapid Response Damage Assessment (RRDA) program is seeking an Engineer or a Senior Engineer to assist with the modeling and analysis of vessel stability and hull strength for ships and offshore floating structures and verify their compliance with applicable Rules and Regulations.

· The RRDA program provides 24/7 technical assistance to ship and offshore floating structure related emergencies such as grounding and collision. When activated, RRDA is an extension of the vessel management team’s own response capability, focusing on the measure of changes occurring to hull strength, stability and the extent to which risk of pollution can be mitigated. This new position is expected to work along with a group of experienced engineers to respond to client service requests when emergencies occur or participate in routine vessel emergency response drills.

The RRDA work by nature of its complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or science. Through broader and more technically challenging work assignments, the ideal candidate will develop a thorough understanding of policies, methods and procedures.

What You Will Do:

• Under the supervision of an experienced engineer or the RRDA manager, develop analysis models and perform detailed engineering analyses to assess vessel stability and hull strength and verify their compliance with applicable Rules and Regulations.
• Perform work which involves conventional engineering practices but may include complex problems such as the resolution of limited information provided by the client, conflicting client requirements, or time constraints.
• Develop technically accurate and timely reports, and responses to client phone calls, emails and other forms of communication for review by an experienced engineer or the RRDA manager.
• Prepare accurate and timely weekly reports and billing on all work performed.
• Communicate the status of the current workload to all appropriate members of the team to meet the needs of clients.
• Standby for and respond to client service requests on the rotating shift
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Work as a team member within the RRDA response team. May work autonomously, once trained, with limited supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Naval Architecture, Ocean Engineering, Civil or Structural Engineering, or other related disciplines.
• Experience (coursework, research, or industry experience) with vessel stability calculations and ship and/or offshore floating structures is preferred
• Experience with stability software and/or salvage software such as Hecsalv, GHS, or NAPA is a plus.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others and sometimes within tight schedules

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Responsibilities & Duties:

• Provide on-site services for new and existing customers, including equipment servicing and upgrades.
• Conduct technical analysis of product implementations, modifications, and enhancements to products in accordance with specific customer specifications.
• Update customer on the nature of service provided and recommends equipment repairs or system upgrade.
• Troubleshoots technical issues and recommends solution to customer.
• Provides technical analysis of equipment installation, modifications, and upgrade in accordance to customer’s requirements.
• Regular communication with customer to ensure high level of customer satisfaction.
• Duties includes but not limited to equipment installation, servicing, maintenance, repair, and relocation.

Requirements & Skills:

• ITE / Diploma in Electrical or Mechanical Engineering.
• At least 2 years on site experience preferred.
• Experience in Automation and/or Robotics preferred.
• Knowledge and experience in using Solid Works and PLC programming will be an added advantage.
• Good problem solving and communication skill.
• On the job training provided.

Responsibilities & Duties

· Identify and develop potential new customers

· Provide support and further develop existing customers.

· Marketing, promoting and selling of products.

· Provide advice on best solution and product to customers.

· Analyse competitors and market trend.

· Prepare quotations.

· Meeting of sales target and plan.

· Perform other duties as assigned.

Requirements & Skills

· Minimum Diploma in engineering, preferably Robotics and Automation.

· Minimum 2 years of experience in technical sales.

· Strong communication and sales skill.

· Good knowledge of industrial automation systems / equipment.

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Job Description :

· Incremental improvements/development of software modules

· Analyze customer/production issues and implement solutions within the existing machine application (bug fixing).

· Investigate and implement engineering change requests.

· Testing of new releases by simulating processes and on actual equipment.

· Work with version control tools and issue tracking tool for software release management.

· Creates and maintains engineering documentations relating to software development / bug-fix / feature releases following BESI standards and design rules.

· Ensure fast response to customer and production issues.

· Provides engineering support to assigned R&D/CIT projects.

· Install & (beta) test new software release/fix at customer sites (ability to travel needed)

Requirements :

Education

Bachelor Degree in Electrical or Computer Engineering (Mechatronic) or Software Engineering

Work experience

At least 3 years relevant experience in automation / equipment industries.

Significant practical experience in software engineering and testing (embedded software and HMI environment).

Experience with agile software development processes, quality control and test driven development

Expertise and methodology

Proficiency in Microsoft (C++, VB6) using Microsoft Visual Studio 6.0 and programming language “C” and “C++”.

Knowledge of UML and state machines; State Transition Diagrams

Very good English skills (verbal and written)

Experience with version control in Mercurial / GIT is a pre

Experience with SECS/GEM is a plus

Other requirement criteria

· Good communication skills in a global environment

· Result oriented

· Strong analytical skills

· Team player

· Self-organized, proactive

· Stress resistant

· Affinity with mechatronic systems

· Ability to travel for on-site support (<30%)

Job Description

-Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models? behaviour and response by use of appropriate sensors.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

-Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Loads, motions and response analysis of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

-Any other duties as assigned by supervisor.

Job Requirements

-Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

-Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture.

-Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Programming codes such as Python, MATLAB, or equivalent.

o StarCCM+, OpenFOAM

-Model experiments in wave flumes, wave tank or ocean basin.

-Good interpersonal and communications skills.

-Ability to adapt and work effectively as members of a team.

-Good command of written and spoken language.

-Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Minimum Viable Product Studio (MVP Studio) of NUS Enterprise, Technology Transfer and Innovation, supports NUS startups in their prototyping journey by providing industry know-how and technical guidance in the productization of intellectual property. We are seeking a versatile mechanical design engineer with market-proven expertise in product design and development, to join our team as a Master Engineer (Mechanical Design).

As a Master Engineer (Mechanical Design), you will guide NUS startups through the mechanical design and development process. You will support the prototyping phase of NUS startups, including generating mechanical concept proposals and mechanical architecture, implementing detailed design using 3D modelling and 2D drawings, and ensuring full design integration at system level. You will collaborate closely with internal cross-functional teams and external vendors to deliver robust mechanical design solutions.

Duties and Responsibilities

Prototype Design & Development

• Generate mechanical concepts and provide mechanical architecture.
• Implement detailed design utilizing 3D modelling and 2D detailed drawings.
• Establish modular design and full product BOM structure.
• Create sub-assembly test plans and test reports.
• Ensure design robustness and full design integration at system level
• Collaborate with ID to implement human-centric styling solutions for mechanical designs.

Technical Advisor to NUS Startups for Mechanical Design & Development

• ​​​​​​​Facilitate startups in prototyping their mechanical designs.
• Provide technical guidance and design expertise throughout the development lifecycle.
• Collaborate effectively with internal team members, startups, NUS faculty members.
• Communicate technical concepts and solutions to non-technical team members and stakeholders.

Vendor Management

• Work with vendors on DFM for the required mechanical designs.
• Coordinate with vendors to ensure delivery timelines and quality standards are met.

Qualifications

• Bachelor’s degree/ Master’s degree in Mechanical Engineering.
• Market-proven mechanical 3D design experience in consumer products, automotive/industrial products, or medtech/healthtech instrumentation, with at least 12-15 years’ combined experience.
• Proficient in 3D CAD modelling, preferably in Pro-Engineer/Creo and Solidworks.
• Experience in casting, plastics molding, sheet metal design, and 3D printing.
• Advance geometrical dimensioning and tolerancing.
• Good knowledge in automation and mechanism design.
• CFD/flow simulation in analyzing flow/thermal characteristics.
• Completed and led at least 5 complete product design life cycle.
• Good knowledge in control systems.
• Strong troubleshooting skills at module and system levels.
• Proven team manager with excellent teamwork and collaboration skills, with the ability to mentor and guide startup teams

Summary:

• Salary up to $6000
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Working Location: Buona Vista

Working Time: 5 day work week, 8:45am - 5:30pm

Job Description

● Utilise 3D CAD design tools and perform high precision 3D printing (FDM

& DLP)

● Utilise basic microcontrollers boards such as Arduino, ESP32 or STM32

to build simple circuit boards for sensor control and data acquisition

● Testing and assembly of electronics and mechanical parts and debugging

of software using basic tools like python or C++

● Familiar with maintenance of laboratory inventory and laboratory

administrative tasks (Procurement, equipment preventive

maintenance/repairs and safety matters)

● Enthusiastic, highly motivated, able to multitask, with excellent

interpersonal and communication skills.

● Administrative works, such as ordering and payment with SAP system.

Job Requirements

● Basic experience in 3D CAD design software, like Solidworks and Fusion360.

● Basic experience with microcontroller boards like Arduino, Esp32, STM32.

● Basic experience in handling simple electronics and basic hands-on soldering skills

● Prior experience or have interest in handling administrative tasks like raising Purchase Orders, payment requests, arranging preventive maintenance of equipment and liaising with vendors.

● Diploma/Higher Nitec/ Nitec holders in Bioengineering, Biophysics, physics, mechatronics, electrical engineering, mechanical engineering, computer engineering, or any related fields.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei
EA Registered no.: R1543992
Recruit Now Singapore Pte Ltd
EA License no.: 21C0845

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• 1-2 years of experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Title: Assistant Engineer (ID4633)
Location: : Woodlands
Working Hour： Mon - Fri 8.15am- 5.30pm
Salary: $2600-$3000

Job Description:
• Assist in the design, development, and testing of mechanical systems and equipment.
• Support senior engineers in planning and executing projects.
• Perform routine maintenance and troubleshooting of mechanical machinery.Conduct inspections and quality checks on mechanical components.
• Assist in preparing technical reports, documentation, and drawings.
• Collaborate with other departments to ensure project goals are met.
• Monitor and ensure compliance with safety and regulatory standards.
• Provide technical support during installation and commissioning of equipment.
• Assist in solving mechanical issues and suggesting improvements.

Requirement
• Candidate must possess Diploma in Mechanical or Engineering|
• No experience require

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• At least a minimum of 5 years of relevant experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior / Associate Engineer to be part of our Thin Film diverse team of talent. You will support the running of Production and ensure equipment readiness and worthiness for production.

What you will be working on:

• To assist Thin Film equipment engineers to sustain equipment performance and perform schedule & adhoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assist new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment.
• Some knowledge in Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Title: KDB+ Engineer (ID1384)
Location: Customer Site
Working Hours: Mon to Fri 9am to 6pm
Salary: $7000 to $7500

Job Description
• Implementation of Engineering/Architecture standards and programs
• Project management of key components
• Follow SDLC and Engineering standards
• Utilize knowledge of applications development procedures and concepts, and basic knowledge of other technical areas to
• identify and define necessary system enhancements, including using script tools and analyzing/interpreting code
• Consult with users, clients, and other technology groups on issues, and recommend programming solutions, install, and support
• Analyze applications to identify vulnerabilities and security issues, as well as conduct testing and debugging

Requirements:
• Bachelor's degree in computer science, information systems, or similar
• At least 1.5-2 years’ experience on KDB+ including the delta control platform (Kdb+ is a high-performance column-oriented database from Kx Systems Inc. kdb+ is designed to capture, analyze, compare, and store data − all at high speeds and on high volumes of data)
• Know how to use q (q is the general purpose programming language integrated with kdb+).
• Experience within the technology or banking industry
• Experience of developing or supporting q/KDB+ solutions
• Experience of developing Java solutions is a plus.
• Scripting (Shell)
• Unix (preferably Linux)

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Candidate with vast experience is also encouraged to apply.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.