Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

We need you to work along-side the Cloud Apps team, supporting our UI wielding petabytes of streaming data into visualizations and metrics of both real and simulated scenarios, aiding: management; debugging; and real-time monitoring of our Autonomous Vehicles (AVs).

You’ll be connecting the work of many disparate, international teams - ensuring their “day-to-day” goes by uninterrupted. You’ll be writing, and testing, in: React; TypeScript; and Vue.js in order to take stakeholder concepts from vague ideation, to the creation of great, responsive UIs with intuitive visualizations. This work will encompass every step of the journey of our AV fleets… from registration and software updates, to calibration, testing, and finally getting users into commercial rides.

What we want you to do

• Design, build, document, test, and maintain the AV fleets’ monitoring and data visualization platforms
• Monitor, support, and resolve issues as they arise in production
• Assist with high-level analysis, system design, and code reviews
• Communicate with stakeholders and team leads to identify system requirements

What we hope you’ll have

• 5+ years of working professionally delivering complex, high-performance web applications with modern JavaScript tooling
• A good eye for UI, UX, and responsive design
• Comfort taking projects from ideation through to completion, with strong communication and collaboration across multiple international teams
• 3D visualization tools (WebGL, Deck.gl/three.js, Mapbox)

Bonus points for experience with

• Working in a globally distributed team
• React, Vue.js, and TypeScript
• Data visualization (Plotly, D3); video manipulation; WebSockets
• Serverless APIs tools such as: AWS; Docker; Terraform
• Python and/or Golang

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics/Electrical industry
• Hands-on experience in maintenance or troubleshooting of high precision equipment
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC
• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.
• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.
• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.
• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.
• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.
• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status
• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.
• Shall be capable of developing work instructions for users of AVEVA NET.
• Must understand company goals and implement management directives and policies.
• Anticipate potential problems and take preventive actions.
• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.
• Shall train the MODEC users on the AVEVA NET application in projects.
• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when
• Contribute to continuous improvement of company work methodology/procedures.
• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

Training in AVEVA NET administration

Relevant Experience:

a) 5 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

Wärtsilä is a world leader in marine technology and leading the industry's transformation towards a decarbonised and sustainable future. With the world’s widest portfolio and service network, we – Wärtsilians - deliver efficient, safe and sustainable integrated products and solutions to enhance the business of our customers. The opportunities presented through digitalisation and new technologies are offering a new era of shipping. Did you know that shipping is the world’s most efficient mode of transportation and that approximately 90% of world trade is carried by sea?

We want to change the course towards an interconnected and cleaner maritime future and are constantly on the lookout for future-oriented talent to join our team and to work towards enabling sustainable societies through innovation in technology and services - together. Are you ready to jump onboard?

We are now looking for a Service Engineer to strengthen the Field Service Resource team in Singapore. This position requires travelling to locations in and around South East Asia – approximately 50- 100 travel days a year.

This is a permanent opportunity, and its location is Pandan Cresent, Singapore.

What will you be doing as Service Engineer?

Your work will focus on these responsibilities:

• Perform Field Service activities according to the work plan.
• Perform overhauls and repairs on assemblies on site and/or in workshops.
• Interact professionally with customers during the work execution.
• Perform internal and external progress status of the assigned work.
• Create the Service Work Reports.
• Ensure that the work is executed according to QSHE guidelines and site procedures and policies
• Follow-up and report on the status of work orders to customer and/or internal stakeholders.
• Continuously seek for solutions in according to best practices.

To be successful in this role, we expect you to have:

• Mechanical knowledge in propulsion equipment
• Self-motivated, analytical & fault-finding skills
• Mature, hardworking, have good anticipation with a problem-solving attitude
• A team player with a positive mindset & ability to adapt / work in a challenging environment
• Good written & communication skill
• Diploma or NITEC in Mechanical Engineering
• At least 2 year working experience in related field

At Wärtsilä we value, respect and embrace all our differences, and are committed to diversity, inclusion and equal employment opportunities; everyone can be their true self and succeed based on their job-relevant merits and abilities.

This is Wärtsilä

Wärtsilä is a global leader in innovative technologies and lifecycle solutions for the marine and energy markets. Our team of 17,800 professionals, in more than 280 locations in 79 countries, shape the decarbonisation transformation of our industries across the globe. Read more on www.wartsila.com.

The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 3 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Key Responsibilities

1) PLC Programming:

• Develop, test, and implement PLC programs for automation systems across various industries.
• Troubleshoot and debug PLC programs and field devices.
• Customize PLC logic to meet project requirements.
• Perform routine checks and maintenance on PLC systems.

2) SCADA Programming:

• Design, develop, and implement SCADA systems to monitor and control industrial operations.
• Create user interfaces for SCADA systems, ensuring ease of use and accuracy of data visualization.
• Configure SCADA servers, HMI (Human Machine Interface), and communication networks to integrate with PLCs and other field devices.

3) System Integration:

• Collaborate with cross-functional teams to integrate PLCs with other industrial control systems and IT infrastructure.
• Ensure smooth data exchange between PLC, SCADA, and other enterprise systems.

4) Testing and Commissioning:

• Conduct system testing and validation to ensure proper functionality and compliance with industry standards.
• Perform on-site commissioning, troubleshooting, and debugging of PLC and SCADA systems.

5) Documentation and Reporting:

• Prepare technical documentation, including program descriptions, schematics, and manuals.
• Provide regular progress reports to senior management and project stakeholders.

6) Support and Maintenance:

• Provide ongoing support and maintenance for existing PLC and SCADA systems.
• Troubleshoot and resolve issues quickly to minimize downtime.

Skills and Qualifications

• Educational Requirements:
  • Bachelor’s degree in Electrical Engineering, Automation Engineering, Computer Engineering, or related field.
  • Relevant certifications in PLC and SCADA systems are a plus.
• Technical Skills:
  • Strong experience in PLC programming (e.g., Siemens, OMRON, Allen-Bradley, Mitsubishi).
  • Hands-on experience with SCADA software (e.g., Wonderware, Ignition, GE iFix).
  • Familiarity with industrial communication protocols such as Modbus, Profibus, Ethernet/IP, and OPC.
  • Experience in designing and programming HMI systems.
  • Knowledge of control system architecture, automation, and process control.
• Soft Skills:
  • Strong analytical and problem-solving skills.
  • Excellent communication and collaboration abilities.
  • Ability to work independently and as part of a team.
  • Attention to detail and ability to manage multiple tasks efficiently.

Experience

• Minimum of [3] years of hands-on experience with PLC and SCADA programming in an industrial or manufacturing environment.
• Experience in troubleshooting and optimizing existing systems.
• Previous involvement in system integration projects is highly desirable.
• Familiarity with process automation and control system engineering best practices.

Additional Information

• Willingness to travel to customer sites for commissioning and troubleshooting tasks as needed.
• Ability to work in a fast-paced environment with changing priorities.
• Knowledge of safety regulations and compliance standards in automation systems.
• Regional travel experience.

Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Roles

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. To be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion.

Responsibilities

• Assist with on-site management to ensure project success
• Ensure project plan is moving forward to meet anticipated deadlines
• Responsible for RFI and submittal process
• Processes owner billings and project related accounting issues

Qualifications

• Bachelor’s degree in mechanical or industrial engineering or equivalent experience
• 1 - 3 years' of experience as a project coordinator, project engineer, or project manager
• Strong experience in AutoCad and Microsoft Office Suite
• Familiarity with rules, regulations, best practices and performance standards
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Role Description

This is a full-time on-site role for a Design Engineer at Firetec (Singapore) Pte Ltd. The Design Engineer will be responsible for designing and developing new products, creating detailed engineering plans, collaborating with cross-functional teams, and ensuring that the engineering meets quality standards.

Qualifications

• Diploma in Business Administration or relevant field
• Proficiency in CAD software, such as AutoCAD
• Strong knowledge of engineering principles and design techniques
• Familiarity with rules, regulations, best practices and performance standards
• Excellent problem-solving skills,attention to details and meeting deadlines
• Effective communication and teamwork abilities
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

Responsibilities:

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user.
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

The candidate need to work in construction site and need to have construction site work experience. candidate must work shift work and long hours till complete the concrete work task. co -ordination with clients and supervisor and company executives. need to know how to estimate quantity for the concrete volume and steel and form work materials requirements.

Job Overview:

We are seeking a passionate AI engineer to work on AI-RAN systems, with a strong background in artificial intelligence and data training. This role involves the development, optimization, and application of AI technologies within Radio Access Networks (RAN), contributing to the advancement of 5G and future networks. The ideal candidate will have strong problem-solving skills, the ability to learn quickly, and a drive to innovate in a fast-evolving field.

Core Responsibilities:

AI-RAN System Development & Optimization:

• Contribute to the design, development, and optimization of AI-RAN systems to improve the performance of wireless access networks.
• Identify bottlenecks in RAN systems using AI technologies and implement solutions to enhance efficiency.

AI Models & Algorithm Application:

• Apply machine learning, deep learning (including CNN, RNN, LSTM, etc.) to optimize network performance.
• Participate in data preprocessing, feature engineering, model training, and validation to ensure model accuracy and efficiency.

Cross-Functional Collaboration:

• Work closely with wireless communication engineers and R&D teams to ensure the successful deployment and delivery of AI-RAN systems.
• Ensure the scalability and long-term optimization of AI-RAN systems through collaboration.

Continuous Learning & Innovation:

• Stay up-to-date with the latest developments in AI technology and continuously enhance technical expertise.
• Apply cutting-edge AI advancements to RAN systems, driving innovation and technology upgrades.

Qualifications:

Educational Background:

• Bachelor's degree or higher in Computer Science, Artificial Intelligence, Telecommunications Engineering, or a related field.

Experience:

• Solid understanding of AI principles, machine learning, and deep learning technologies.
• Prior experience in AI-RAN systems is a plus, though highly motivated recent graduates with strong learning capabilities are also encouraged to apply.

Technical Skills:

• Proficiency in programming languages such as Python and C++ for developing and maintaining AI platform features.
• Experience with machine learning and deep learning algorithms, and familiarity with frameworks like TensorFlow, PyTorch.
• Practical experience with data analysis, training, and tools like Docker, Kubernetes, Git, etc.
• Knowledge of at least one architecture and experience in high-performance computing (e.g., GPU, X86, ARM).

Soft Skills:

• Strong desire for continuous learning and self-improvement.
• Excellent communication skills and the ability to work well within a team.
• Problem-solving ability and the capacity to make quick decisions in high-pressure situations.

Preferred Skills:

• Knowledge of advanced AI fields such as multimodal AI, AIGC, NLP, and LLM.
• Familiarity with RAG and Agent modes, and experience with tools like Langchain, LlamaIndex, and SemanticKernel is a plus.

Lead Mechanical Engineering

Mechanics- CRAFTMANSHIP - Project execution - COOPERATION

The Most Desired Audio Brand

At Bang & Olufsen, we strive to be the most desired audio brand in the world. For more than 95 years, we’ve developed products that change moods, inspire minds, and instill pride in all of us. We are passionate innovators, using our deep knowledge and collaboration skills to solve and simplify complex challenges every day, each of us driven by the profound effect sound can have on the mind. We welcome others that share our passion.

Join us to use your mechanical expertise to create the next iconic wearable Bang and Olufsen product. Here you get to participate in project teams where you in unison with expert colleagues and Partners, drive mechanical architecture and engineering.

Your mission

As our new mechanical engineer for wearable products, you will join our Project development department as part of the global Mechanical engineering team. Here you will drive NPI projects as Sr. Lead mechanical engineer and expert for earphone & headphone program.

Working alongside concept creators, hardware and acoustics specialists, you will create new and exciting products based on Concept and Business briefs. Joining various project teams, you will:

• Acting as lead for the mechanical design creation process, throughout complete NPI phase.
• Master concept and architecture engineering, providing mechanical engineering and knowhow.
• Make assessments and recommendations e.g., on material and process choices based on mechanical design principles, supporting design for perfection, longevity and magical elements.
• Create mechanical constructions and make proof of concept by rapid prototyping & simulations.
• Cooperate with suppliers for exploration and product development, transforming proven concept and architecture into product requirements.
• Work closely with Quality organization and Partners to ensure product and process validation.

Your network

You will become a part of the global mechanical team. We are a very dynamic team that approach our tasks with vigor and technical curiosity as we are all proud engineers loving our products and exist to create amazing products.

We are an experienced team, and you bring a lot of experience and join a very inspiring environment. Here you will have room to grow and the opportunity to bring your ideas and passion for mechanical design and development into play.

Your location

You will be working out from our office in Singapore. Working closely with your colleagues in a global setting and suppliers in Europe, China and other parts of Asia, you should also expect there to be some travel activity.

Education & Experiences

A passion for mechanical engineering & creation. You have a well-founded and deep understanding of mechanical architecture, design, manufacturing processes and material characteristics. Experiences of leading suppliers and have the capability to transform proven architecture into product requirements.

Moreover, you bring:

• Degree or master’s in mechanical design, Engineering
• 10+ years of experiences in R&D or product development
• Design experiences in audio, wearable products, hearing aids devices an advantage
• 3D CAD design SW such as Creo Parametric
• Capable of Architecture design with good understand of GD&T, simulation
• An understanding of the different tooling processes for different material such as plastic, silicon, aluminium, steel, glass and wood
• An open mind, technical curiosity, and attention to detail
• Good communication skills in English. Fluent in Mandarin a plus.

Ready to join the most desired audio brand in the world?

Then send your CV and application by pressing the apply bottom above. Applications are assessed continuously, so please apply as soon as possible and no later than 31st January 2025.

Read more about our recruitment process and explore your career opportunities within Bang & Olufsen, https://www.bang-olufsen.com/en/corporate/careers

Responsibilities:

· Project management involving Sanitary, Plumbing & Gas Services

· Documentation of method statement and work procedures

· Review and monitor site construction activities programme to ensure work completion as scheduled

· Evaluation, Cost estimation & analysis for Sanitary, Plumbing & Gas Services

· Preparation of design construction drawings

· Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers

· Attend site meetings and inspections.

Requirements

· Degree / Diploma in Mechanical or related discipline

· Knowledge of tender costing with experience in evaluation and cost estimation for Sanitary, Plumbing & Gas Services will be an added advantage

· 3 years working experiences in similar position with relevant design and installation knowledge preferred but fresh graduate may apply

· Excellent interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible to oversee the development, operation and management of the chemical analysis lab, ensuring precision and compliance with industry standards while optimizing analytical methodologies and supervising staff.

Key Responsibilities:

• Create and manage the operation system for the chemical laboratory to ensure compliance with industry

standards and quality requirements.

• Develop and implement advanced analytical methods to meet the fab’s monitoring and analysis needs.

• Optimize processes to enhance the precision and efficiency of chemical analyses.

• Ensure the calibration, validation, and maintenance of laboratory equipment to uphold accuracy and reliability in results.

• Conduct micro-contamination monitoring activities to detect and mitigate issues effectively.

• Provide guidance and supervision to laboratory staff, establishing and achieving annual performance goals.

Education Qualification & Essential Experiences:

• Bachelor’s degree or higher in Electronics, Electrical Engineering, Physics, or a related technical field.
• Minimum of 3 years of relevant experience in semiconductor Chemical Analyst engineering.
• Strong problem-solving skills and a detail-oriented approach with the ability to analyse complex data and derive insights.

Personal Attributes:

• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

Seeking a talented & driven Backend Software Engineer (Java) to build, design, develop, and optimise high-performance systems that ensure reliability, low latency, and scalability for backend fintech applications.

You’ll collaborate in a fast-paced, agile environment, tackling complex challenges while maintaining clean, efficient code and quickly addressing production issues. If you have strong technical skills, a problem-solving mindset, and a passion for learning, this is your chance to contribute to cutting-edge solutions that empower global financial institutions.

This is a Permanent Full-time role.

YOUR NEW JOB

• Develop clean, maintainable backend code aligned with engineering best practices.
• Enhance the architecture and systems ensuring high performance, low latency, availability, and reliability
• Respond promptly to production issues, collaborating with team members to resolve problems effectively
• Adapt & thrive in a fast-paced, startup, and agile environment

WHAT IS NEEDED FROM YOU

• Minimum 4 years of hands-on fulltime working experience in Java backend development
• Skilled in one or more programming/scripting languages:
  Java, Python, Golang, NodeJS, C++, or Rust
• Proficient in PostgreSQL
  with expertise in SQL tuning & optimization
• Experienced in designing and implementing scalable microservices & APIs
• Knowledgeable in caching mechanisms
• Understanding of HTTP, WebSocket, &TCP/IP protocols
• Experienced with Messaging Queue systems
• Comfortable using the Atlassian product suite
• Strong problem-solving skills, collaborative mindset, with ability to work independently
• Positive attitude with a willingness to learn and acquire new skills

WHAT WILL MAKE YOU STAND OUT

• Fluency in English and Mandarin for effective internal stakeholder communication & external business correspondence
• Prior experience in FinTech or trading, financial, crypto industries
  Familiar with blockchain technologies, capital markets, & financial payments systems
• Hands-on experience using:
  Redis, for Caching
  Kafka, for Message Queueing
  JIRA, Confluence
• Experience with managing infrastructure on AWS
• Knowledge of Kubernetes

Job Responsiblities :

• Responsible for environmental protection, safety and health, radiation protection and other new government announcements or revised laws and regulations.
• Responsible for the planning, reviewing and implementation of occupational safety and health management plan.
• Assist in the investigation of occupational accidents, and be responsible for external notification and declaration.
• Responsible for various environmental safety and health related Management Systems audits and inspections and tracking the gaps and recommendation for improvements.
• Responsible for the planning, reviewing and implementation of GHS, chemical classification management.
• Responsible for the audit of contractors, suppliers and licensed waste disposal companies.
• Responsible for the company's various environmental safety and health related education and training planning and implementation.
• Responsible for ISO 14001, ISO 45001, SS 651 and other management systems operation, maintenance and internal audit, and complete the external audit planning and execution.
• Responsible for the IH and Medical Monitoring program.
• Organize all Fire Drills and CERT related activities.
• Perform ISEP related project plan assigned by the management.

Job Requirements:

• A Degree qualification in a relevant discipline
• Min 2 years of relevant working experience in Semiconductor Environment,.
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure

JOB SCOPE & JOB RESPONSIBILITIES

• Experience in an engineering, procurement and operations.
• Ability to analyze bills of material and drawings to understand key requirements.
• Knowledge and direct experience in negotiating contracts and quotations with Contract Manufacturers and Suppliers.
• Ability to identify cost reduction opportunities.
• Responsible for procurement, sourcing and negotiation.

JOB REQUIREMENT

• Diploma or Bachelor degree in engineering.
• At least 3 years experience in procurement engineering.
• Good procurement knowledge is a must.
• Possess good analytical skills, resourceful and independent.
• Team player
• Effective verbal & written communication skills.