Overview: (Summary of the role)

The Storage Engineer must be a certified Storage (SAN) and Backup Administrator in administration and troubleshooting, in a 24x7 enterprise setting (inclusive of manual discovery or post actions from automatic alerts). The Engineer will be expected to cover level 1 and level 2 storage related problems and must be an experienced administrator in the following technologies:

• IBM V3700 and V7000
• EMC unity or EMC VNX
• NETAPP storage
• HP Nimble or any Dell storage
• Hitachi storage
• EMC Isilon or any NAS product
• Cisco or Brocade san switches
• NETBACKUP or Veeam
• IBM tape libraries

Responsibilities:

• Provide Installation, administration and maintenance support for Storage Area Network and Enterprise Backup.
• Health check and monitoring of the storage devices.
• Integrate the storage solution’s hardware and software into the customer’s operating environment and ensure full interoperability.
• Regularly update the firmware.
• Ensure comprehensive documentation of the storage solution is in place.
• Prepare test plan in consultation with the customer to ensure the solution can function fully. Enterprise Backup.
• Administration and management of Symantec backup environment.
• Backup job configuration and scheduling.
• Backup server performance tuning.
• Troubleshoot any backup related.
• Capacity planning for tape libraries and backup servers.
• Perform Disaster Recovery (DR) for all the critical systems and ensure successful rebuilt of Production or DR servers after each DR should the need arise.
• Manage and monitor multiple storage subsystem.
• Manage disk partitioning.
• LUN assignments (create, modify or delete LUN of various sizes).
• Creation and management of Zones.
• Manage the storage capacity and utilization.
• Conduct capacity planning and performance tuning.
• Define and configure security within the storage subsystem.
• Maintaining or troubleshooting the zones and switch related issues.

Requirements:

• Recognized Diploma/Degree in Information Technology/Information Systems/Computer Science, Business IT or other equivalent university degree.
• At least 3 years’ experience in Enterprise Backup Solutions and Storage Area Networks.
• Experience in power cycling the storage devices and upgrading the SAN switches.
• Working experience on storage replication is good to have.
• Experience data centre shutdown activities.
• Experience in DR exercises.
• Good understanding of a services business in a high-tech environment from a supplier, integrator or operator’s perspective.
• Demonstrated leadership ability and achievement oriented.
• Must be able to work independently with minimal supervision.
• Strong analytical and problem-solving skills, combined with the ability to provide quick resolution to problems.
• Effective verbal and written communication skills.
• Customer service-oriented and an effective team player.
• Preferable with government sector experience.

Engineering and Architecture
You will help to build and sustains strong technology foundations forming the bedrock of our customer’s digital solutions.

What will you do as a Software Engineer (DevOps)?

• Design, develop, and maintain secure and scalable DevOps pipelines, tools, and frameworks
• Collaborate with development, cloud, and security teams to integrate best practices into the software development lifecycle
• Implement and manage continuous integration and continuous deployment (CI/CD) processes to ensure efficient and reliable software delivery
• Stay up to date with the latest security trends, technologies, and best practices, and provide recommendations for improvement
• Conduct analysis on business requirements and develop solutions to enhance business capabilities
• Conduct peer code reviews and provide technical mentorship/sharing to the team
• Conduct System Integration Tests and coordinate with business users on User Acceptance Tests
• Publish documentation and guides for the use of new or enhanced systems
• Automate self-help processes and templates with guardrails that development teams can use

What makes you a successful candidate?

• Bachelor’s degree in computer science, STEM, or a related field. Relevant certifications (e.g., AWS Solutions Architect, DevOps) are a plus
• 8+ years of relevant experience in software development, DevOps, solution designing, software testing, production support
• Experience in C# or Python preferred and demonstrates Test Driven Development (TDD) in their work
• Experience with database technologies such as Microsoft SQL, Oracle, or PostgreSQL
• In-depth knowledge of DevOps principles, practices, and tools, including CI/CD pipelines, configuration management, and infrastructure automation
• Good understanding of security and networking principles, protocols, and technologies
• Proficiency in using GitHub for version control, collaboration, and code review processes. Experience in configuring and managing CI/CD pipelines using GitHub Actions for automated software builds, tests, and deployments.
• JFrog Artifactory: Experience in managing artifact repositories for storing and distributing software packages
• Familiarity with tools in the application security space, e.g., SAST and OSS
• Experience with cloud platforms (AWS preferred) and containerization technologies (e.g., Docker, Kubernetes)
• Excellent problem-solving and analytical skills, with the ability to identify and mitigate security risks
• Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams
• Passionate about automating everything and removing oneself out of the picture

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Job Summary

The Senior Network Operations Engineer is an Operations role whom will focus on SLA driven Level 3 Incident Management which encompasses responding and resolution of Network, Wireless, Security Infra related issues. The position will be a critical member of the Operations team whom are the higher level and Sev 1 n 2 escalations to diagnose and troubleshoot fault incidents. This role will work directly with customers to gather the fault symptoms and provide the resolution or work around and share best practices, make recommendations, document the issues, provide root cause incident reports. The job scope includes extensive support to client network support team to perform activities in network health check, wireless testing, user issues, break fix, preparing Incident root cause reports.

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Field engineer responsible for handling support issues on Enterprise Networking Platforms and Solutions related to Routing, Switching, Wireless, NAC, Security. Includes Vendors such as Cisco / Aruba / Fortinet / Riverbed / Palo Alto / F5 etc
• Under take escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 3 on site troubleshooting and hardware field replacement works for Enterprise Networking Solutions.
• Be part of a team of engineers that performs 24 hours standby duties on a rotational basis.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you
• Work closely with various team of engineers for troubleshooting in relation to Enterprise Networking incidents.

Qualifications:

• Minimum 5 years of relevant experiences in network operations including network, wireless, security technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA/CCNP/CCIE certified plus any other networking certifications preferred
• Strong understanding about Enterprise Networking Solutions such as VSS,
• VPC, Multicast , MPLS etc..
• Ability in performing local / remote IOS upgrades on different products and RMAs for faulty devices in production

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Responsibilities :

• Communicate, coordinate, and integrate department resources to enhance efficiency and achieve departmental goals and objectives.

• Oversee team member assignments, manage project scheduling, and track project progress to ensure timely and successful completion.

• Implement cost control measures and optimize resource allocation to maximize department performance.

• Foster team development through targeted training and mentorship programs, ensuring the success and growth of team members.

Job Qualification

• Master’s degree in a related field, such as Chemistry, Chemical Engineering, or Material Science.

• Over 5 years of relevant work experience.

• Strong knowledge of 12-inch semiconductor diffusion processes, including furnace, ion implantation, and Wet Bench System.

• Proven ability to identify, assess and solve problems

• Analytical with good interpersonal skills

• Team leader with execellent communication/coordination skill.

Job Duties

• Capacity planning and management.

• Tool Productivity improvement.

• Capital investment evaluation and control.

• Fab space layout planning.

Job Qualification

• Bachelor degree or above in Industrial Engineering, Business, or related engineering field is required.

• 5+ years of experience in Fab

• Global mindset, Self-motivated, high personal standard,

• Strong analytical and problem-solving skills.

• Programming skills, knowledge about IC process and logistic flow are preferred.

Normal working hours + Standby support

Work Location: East

Skillsets Required (MUST):

F5 Load Balancer

AWS Load Balancer - Application Load Balancer (ALB) / Network Load Balancer (NLB)

Firewall

Palo Alto

Junior Network engineer with minimum 1 year exp is ok for the role with the avove skillsets. this is a level 1 role

C# Software Engineer - 2 years contract, renewable & convertible - Singapore

Our Client is looking for mid-level C# Software Engineer:

• At least 2 years in software development
• At least 2 years of in C# .Net Framework

Why Join Us?

• Career Growth: This role offers significant growth opportunities, allowing you to expand your skills and advance in a dynamic, innovative environment.
• Innovative Projects: Be at the core of impactful digital transformation, working with cutting-edge tools and technologies.

Responsibilities:

• Analyzing, designing, programming, testing, documenting and maintaining IT applications
• Performing Service Request submission and deployment support activities for the different environment. (SIT, UAT, PROD)
• Updating system documentation.
• Performing and managing stages of the SDLC and participate in the systems review with Project Lead/Manager.
• Developing applications for better productivity using development tools
• Designing and documenting system design, architecture and propose appropriate technologies and tools required to implement systems; and ensuring users sign-off on design specifications.

Requirements:

• Bachelor’s degree in Computer Science, Software Engineering, or related field.
• 2+ years of experience in C# .Net Framework
• Experience with WPF and ASP.Net
• Familiar with relational database concepts and SQL (MS SQL)
• Experience in Git and good knowledge in Git workflow
• Experience in productivity tools such as Jira and Confluence
• Experience working in an agile scrum environment
• Knowledge in Jenkins and Kubernetes is a plus

This is a 2 years contract to start, renewable and convertible to permanent.

EA License Number: 16S8131

Recruiter License Number: R22105628 (Yeo Zhi Qi Jeanette).

Responsbilities:

• Provide highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems
• Perform continual improvement programmes, parts overhaul, preventive maintenance, modifications and repair works on equipment
• Serve as company liaison with customers on administrative and technical matters for assigned projects
• Coordinate logistics arrangements with customers on equipment related matters.
• Responding to customers' complaints provides time to solutions to resolve customers' issues
• Monitor the performance of the product, provide regular update reports and feedback on customer's service requests
• Report common complaints of customers to management in order to address the situation for future reference.

Requirements:

• Degree/Diploma in Electrical/Electronic/Mechanical/Mechatronics Engineering or its equivalent
• Some relevant experience with semiconductor equipment knowledge
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment
• Required to work or on standby after office hours/weekend/public holiday.

EA Personnel Name: Jackie Ng
EA Personnel No: R22109024
EA License No: 95C5411

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsiblities:

• Implementing network and security solutions: Responsible for implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices like Aruba. Racking and Stacking network devices. Expected to handle small to mid-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network and security delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to client and internal operations team.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 1-5 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNA/CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Senior Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsibilites:

• Designing and implementing network and security solutions: Responsible for designing and implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices. Racking and Stacking network devices. Expected able to handle mid-sized to mega-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to Client and internal operations team.
• Provide guidance and mentorship: Conduct knowledge sharing sessions to keep the team updated on the best practices.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 5-10 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

Job Description & Requirements

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings,material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings.
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of E&M work in construction site for projects of similar scale and complexity.

The Security Architect Head will shape and manage security architecture across all layers of the organization’s systems, protecting critical assets and ensuring regulatory compliance.

Key Responsibilities:

· Act as the security architecture expert, ensuring alignment with regulations.

· Design, implement, and maintain robust security solutions across various layers, including OS, applications, infrastructure, and integrations.

· Establish multi-layered security controls to build resilience.

· Conduct reviews to strengthen the security posture and ensure regulatory compliance.

· Develop and oversee the organization’s cloud security strategy using modern technologies and native services.

· Mentor and develop the Security Engineering team, fostering a learning culture.

· Engage with stakeholders to integrate security into business solutions and manage expectations.

Requirements:

· Degree in Computer Science, Computer Engineering, or Information Security.

· 12+ years of experience, with 5+ years in security architecture and 3+ years in team leadership.

· Proficient in AWS Cloud Security Engineering and DevSecOps SDLC.

· Security certifications like CISSP, CISM, CCSP, CISA, or AWS Certified Security are preferred

· Hands-on experience in managing complex security engineering and solution implementation in the FI industry is an advantage

· Knowledge of regulatory requirements and industry practices (e.g. MAS TRM Guidelines, MAS Cyber Hygiene etc.)

• Open to working after hours and on weekends for maintenance or patching purposes
• 100% onsite role
• End-user support environment

about the company
My client is one of China’s largest state-owned energy and petrochemical enterprises. As the company continues to expand, they are seeking an IT Support Engineer to provide dedicated support to end users within the organization.

about the job

• Respond to end-user IT inquiries promptly, providing effective technical assistance with hardware, software, and network issues.
• Guide users through basic troubleshooting steps for common problems and escalate more complex issues to senior engineers when necessary.
• Install, configure, and maintain software on computers and mobile devices for end users. Support setup and troubleshooting for various hardware, including computers, printers, peripherals, and AV equipment, resolving connectivity and printing issues as needed.
• Support the setup of AV systems for meetings and presentations, troubleshooting and resolving related issues to ensure smooth operation.
• Assist users with any issues related to in-house applications, collaborating with developers or relevant teams to resolve technical problems. Provide user guidance and support for effective application usage.
• Create and maintain user guides for various software applications, including in-house solutions, to support users effectively.
• Handle other IT-related duties or projects as assigned to support the company’s operational needs.

skills and experience required
Basic knowledge of Windows OS, email servers, and Citrix. Proficiency in Microsoft Office Suite.

IT troubleshooting experience and experience supporting mid to large group of users.

what's the offer
This a permanent opportunity for a IT Support Engineer will pay a salary range of $ 4,000 - $ 4,800 plus benefits.

To apply online please use the 'apply' function, alternatively you can reach me at https://www.linkedin.com/in/Oliviatoh-032330132/. (EA: 94C3609 / R22109942)

Project Overview

We are hiring research engineers interested in advancing the state of the art in data-efficient machine learning at SMART in the new program: Mens, Manus and Machina: How AI empowers people and the city in Singapore (M3S).

With the recent emergence of large language models (LLMs), the research engineers will assist in investigating how data-efficient and resource-efficient techniques, such as data attribution, data selection/reweighting, data valuation, data curation, Bayesian optimization, active learning, can be applied in the context of LLMs (as well as important issues involving AI privacy, model auditability and updatability).

Responsibilities

• Research on topics related to data-efficient machine learning, such as data attribution, data selection/reweighting, data valuation, data curation, Bayesian optimization, and active learning, in the context of LLMs.
• Investigate how these concepts as well as important issues involving AI privacy, model audibility, and updatability can be applied in the context of LLMs.
• Develop, implement, and evaluate experiments to characterise the feasibility and performance of the proposed research ideas.
• Collaborate with other PhD and undergraduate students to publish research results in top-tier conferences and journals, with focus on venues associated with the above-mentioned areas .

The research engineer will be jointly advised by Prof. Daniela Rus (MIT CSAIL), Prof. Alex 'Sandy' Pentland (MIT Media Lab), and Assoc. Prof. Bryan Low (NUS School of Computing), and based at SMART (Singapore-MIT Alliance for Research & Technology) in Singapore. The research engineer will have the opportunity to collaborate with PhD and undergraduate students, as well as Postdoctoral Fellows, within our research groups.

For more information on our research group and interests, visit

https://danielarus.csail.mit.edu/

https://www.media.mit.edu/people/sandy/overview/

https://www.comp.nus.edu.sg/~lowkh/research.html

Requirements

• Degree or Masters Degree in Computer Science, Machine Learning, Artificial Intelligence, or other related disciplines.
• Strong publication record at premier AI/ML venues such as ICML, ICLR, NeurIPS, CVPR, ACL, EMNLP or similar.
• Strong proficiency in programming.
• Strong proficiency in English and communication skills.
• Experience with machine learning and deep learning frameworks such as Pytorch, Tensorflow, among others.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses. We will recommend that you watch this short video with input from our employees around the world.

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Ownership on critical incidents for customers to deliver resolution with in SLA.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up-to-date software.
• Troubleshoot production issues and network/security problems to fix any infra related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Performing RMA for hardware failures and replacement in production environment
• Perform health checks for the critical environments and ensure the systems running up to the standard and no potential failures.
• Setup staging and simulation for customer activities for critical jobs before actual tasks in production environment.
• Working in 24/7 operations centre and standby role for after office hours support on monthly rotational basis
• Able to follow and meet customer SLA for all the incidents and requests / responsible for the service delivery
• Undertake escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 1/2/3 on site troubleshooting and hardware field replacement works for customers.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you

The Individual and their Experience:

• Knowledge of ITIL principles, particularly Incident, Change, Problem and Service Management
• Minimum 2-3 years of relevant experiences in network operations including network, wireless, security technologies.
• Experienced on working with vendors and customer on outage situation and provide direction to juniors and customer on recovering services affectively.
• Hands on experience in operations and BAU for fixing user/infra issues in production environment is essential.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Windows Engineer

Smart IMS is a leading provider of information technology solutions, offering a wide range of services to businesses worldwide. With a strong focus on innovation and customer satisfaction, we help organizations streamline operations, improve efficiency, and achieve their strategic goals.

We are currently looking for a Windows Engineer to manage windows infrastructure and operational support for Windows servers.

Responsibilities:

- Ensure system currency for Windows servers are up to GIS standards

- Ensure ancillary patches (Microsoft Office. Java, Adobe related products) for Windows servers are up to GIS standards

- Patching on all APAC Windows servers

- Ensure that there are no overdue vulnerabilities in the patching report

- Forecast the upcoming vulnerabilities, Plan the Patching cycle, send AO comm’s and raise paper works

Requirements:

- Working track record in patching and recovering Windows servers and ancillary patches

- Familiar with ITIL framework

Additional Information:

- Location: HarbourFront

- Working hours: Monday to Friday, 9 am to 6 pm.

- Competitive salary commensurate with experience, with 14 days of Annual Leave and above market medical coverage / insurance.

- 12-month renewable contract with 2 months' notice period.

Responsibilities:

• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is prefer.
• To provide support on maintenance projects.

Requirements:

• Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• With at least 1-2 years of Server/Network experiences
• A team player with good communication and interpersonal skills
• Able to work on scheduled standby on rotating weeks

To apply, please visit www.gmprecruit.com and search for Job Reference: 24825

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

• Handle the preparation and modification of schematic, detailed, and production drawings for precast concrete components, steel molds, and reinforced concrete structures, and address technical and design challenges following Singapore's established standards.
• Responsible for preparing 2D and 3D presentations and design drawings, as well as compiling data and performing basic design computations.
• Expected to engage in client liaison, coordinate with authorities, consultants, and subcontractors, and attend design and construction meetings
• Provide guidance and support to less experienced staff or colleagues in their tasks.

Requirements:

• Diploma / Degree in Civil Engineering
• At least 2 years relevant experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Collaborate closely with the Planning and Project Controls Manager to perform planning and scheduling, risk management, cost control, and reporting activities throughout the detailed design and construction phases of the project.
• Act as the main contact for planning, scheduling, and cost analysis, developing accurate cost forecasts and actionable reports to support effective project management.
• Prepare and deliver clear status reports, issue network-based schedules, update Primavera P6 with project progress, and monitor earned value systems to guide team performance and understanding.
• Strong knowledge of planning and scheduling to identify scheduling issues and recommend corrective actions and implement relevant control services.

Requirements:

• Degree in Project Management or equivalent
• At least 5 years EPC/full-service project delivery processes and apply project controls methodologies and practices specifically related to cost control development.
• Strong verbal and written communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in Dwall works

- Degree in Civil Engineering

- Accredited as a RE with IES

Mission statement:

Lead the engineering execution of medium-size projects and ensure that all related activities are performed in accordance with Hitachi Energy policy, contractual agreements, quality standards, health, safety & environment requirements. Responsible for day-to-day designing and engineering activities aligned with schedule commitments. He / She is to possess technical knowledge and skills relating to the design of various transmission substation/Industry components, systems and equipment. To provide technical guidance to his/her project team and lead project engineering discussion.

Your responsibilities:

• You will design system while adhering to design and engineering principles of transmission substation/Industry, incorporate equipment, system, and safety features in design plans, comply with local and national safety standard and ethics that come with the design engineer role.
• You will maintain records and documents of all the work and design in accordance with unit and customer requirement.
• You will work in within the proposed schedule and budget for the project and liaise with project stakeholders with status update to them regarding the status of the work.
• You will coordinate mechanical and electrical tests on design, if required, conduct tests on equipment against fundamental design.
• You will manage department's compliance with organization’s risk management framework, review design drawings for practicability, completion timeframe and research capabilities.
• You will assist in development engineering resource planning strategy, coordinate with factory and supplier to ensure the design meet with the requirement, prepare design related calculation and issue bill of material·
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• You hold Electrical Engineering degree or equivalent.
• Preferably with 3 years’ experiences in Electrical/Transmission Industry.
• Experience and proficient knowledge and skills in BIM - Autodesk REVIT (3D model)
• Experience in switchgear planning, design and bidding related tasks.
• Good knowledge of substations equipment, protection relays and network automation.
• Knowledge of Electrical/Transmission Utilities Industry is preferred.
• Proficiency in English language.

The individual will have a strong background in designing, developing and testing complex hardware systems.

This position involves working across multiple phases of product development cycle, from design to implementation. He/she should be self-motivated, resourceful and proactive, able to work independently in a fast-paced environment and closely with multi-discipline professionals to support project or product development

Responsibilities

1. Design and simulate electronics circuitry, including microcontrollers, SoC, DDR, wire & wireless communication interface and power supply.
2. Circuit draft and schematic capture with popular EDA tools.
3. Perform prototype testing, system integration, debugging and troubleshooting to identify and resolve hardware related issues.
4. Generate documentations on design concepts, specifications, test reports and verification reports, etc.